wooden wonder - laserox · compatible with 7 wonders duel® wooden wonder assembly guide use wood...
TRANSCRIPT
Compatible with 7 Wonders Duel®Wooden Wonder
Assembly Guide
Use wood glue for assembly.Always dry fit the parts first to make sure the components are correct ones. If you encounter any issues, please contact us at [email protected] or our Facebook page at facebook.com/laseroxinserts
2
Use an exacto knife to cut the bits connecting the parts to the frame.
Remove the parts from the frame with a rotating motion along the axis formed by the bits you just cut.
Use the exacto knife to remove any of the remaining connection bits.
Always dry-fit the parts to together without any glue to make sure you are assembling the correct parts.
Use a drop of glue along the joints and hold it in place until the glue has sufficiently dried.
3
Part numbersWe use the following codes to refer to individual parts in our assembly guide:
4
Main BoxRequired parts: A1, A2, A3, B5, B6, D1, D3, E1, E3
A2
A1B5
D1D1E1
A3
D3
B6B6
E3 x5(Choose slots depending on if you have sleeved cards or not)
5
“A” BoxRequired parts: G1, G2, G3, G4, G5
G5
G3G2
G4G5
G1
G1
6
“B” BoxRequired parts: C1, C2, C4, D2, E2
C1 C1
C1C4C4
C4C4
D2
E2 C2
7
“C” BoxRequired parts: B1, B2, B3, B4, C3, F1
C3C3
B2
B1
F2
B4
B3
8
Put into the box