wood floor restoration – the 6 step floor sanding process
TRANSCRIPT
WWOOOODD FFLLOOOORR RREESSTTOORRAATTIIOONN- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The 6 Step Floor Sanding Process
Ensure that the area to be restored is cleared of
all furniture and anything that may be damaged during the
sanding process
Complete any necessary repairs to the wooden boards; fix down loose
boards and hammer down any protruding nails
Complete the sanding process; start in the
corner of the room and work up and down. Keep
the sander moving!
Sand with the edger; this is notoriously
challenging to control. Use a side-to-side motion
Fill any existing holes with a latex wood filler.
This works to fill any holes or scratches and
needs to be applied liberally
Finish the wood floor; apply a wood stain, if
required and then apply your chosen wood finish. Leave your wood floor to
fully dry!
SSTTEEPP 11:: SSTTEEPP 22:: SSTTEEPP 33::
SSTTEEPP 44:: SSTTEEPP 55:: SSTTEEPP 66::
http://woodfloorpeople.co.uk