wobd2 how to install jlr sdd v142 da-vina 2534 j2534
TRANSCRIPT
How to install JLR SDD V142 DA-VINA 2534 J2534
Good news!! JLR SDD V142 DA-VINA 2534 J2534 installation instruction for you all !!
1. Open "computer" > "DVD Drive"> "SDD 142.00_FULL".
Choose the language you need.
The software will come to the "Prepare Setup" interface.
SDD_142.00 will be installed and please click "Next" and accept the agreement.
Tick on the square (I have read and understand this firewall compatibility) to continue.
Choose OK to navigate to the system information page.
The application is installed.
Choose "Next" and you will see an icon of Navigation Program... on the desktop.
Complete installation of SDD. And one icon "JLR SDD" appeared on your desktop.
Click "Finish" and then restart your computer.
2. Open "computer" > "DVD Drive" to choose the first "VDF_JA_142".
Again, choose the language you need.
Click "Next" to finish VDF_JA installation.
3. Open "computer" > "DVD Drive" to choose the second "VDF_JV_142".
Choose the language you want.
Go to next.
Complete VDF_JV installation.
Restart your computer after installation.
4. Open "computer" > "DVD Drive" to open the first "VDF_LA_142".
Choose the language you want.
Go to next.
Complete VDF_LA installation.
Restart your computer after installation.
5. Open "computer" > "DVD Drive" to open the second "VDF_LV_142".
Choose the language you want.
Go to next.
Complete VDF_LV installation.
Restart your computer after installation.
(the same like what you did for the first "VDF_LA_142")
6. Open "computer" > "DVD Drive" >"SDD_142.01" for installation.
Restart your computer when you complete updating SDD to the version 142.01.001.
7. Open "computer" > "DVD Drive" >"SDD_142.02" for installation.
Choose OK to install SDD_142.02.
Restart your computer when you complete updating SDD to version 142.02.001.
(the same as what you did for SDD_142.01)
8.Open "computer" > "DVD Drive" >"SDD_142"
Choose OK.
Waiting for additional pinpoint test.
Finish the installation of additional pinpoint tests.
9. Open "computer" > "DVD Drive" >"Driver">"setup"
Microsoft Visual C++ 2010 x86 Redistributable is installed.
Click "Next" on the DA J2534 software interface.
Close the interface when the installation of DA J2534 is completed
10. Right click "computer" to choose "manage". Then to enter the interface.
Choose "Device Manger"> "Ports (COM & LPT)"> "USB serial port (COM4)".
Renew data collect for this module.
Then click "Diagnosis" on the bottom.
Again, do the symptom selection.
12. Open "computer" > "DVD Drive" to open "DFStd_KEY".
Minimize the file.
13. Open "computer" > "DVD Drive" to open "DFStd".
Copy the words from "DFStd_KEY" to fill in the blank of license key, and continue.