wobd2 bmw icom a2 system led turns red and flashes always(solved)
TRANSCRIPT
![Page 1: Wobd2 bmw icom a2 system led turns red and flashes always(solved)](https://reader036.vdocuments.site/reader036/viewer/2022081420/58f21fb41a28ab46318b459f/html5/thumbnails/1.jpg)
BMW ICOM A2 System LED Turns Red and Flashes Always(SOLVED)
Symptom:BMW diagnostic mux ICOM A2 System LED stays red and flashes/blink always. No problem exists after self-test and firmware update.
![Page 2: Wobd2 bmw icom a2 system led turns red and flashes always(solved)](https://reader036.vdocuments.site/reader036/viewer/2022081420/58f21fb41a28ab46318b459f/html5/thumbnails/2.jpg)
Solution 1:1)-rehot hot aır gun thıs ıc ..2)-ıf no, replace or change new one ..3)-problem that ıc..
![Page 3: Wobd2 bmw icom a2 system led turns red and flashes always(solved)](https://reader036.vdocuments.site/reader036/viewer/2022081420/58f21fb41a28ab46318b459f/html5/thumbnails/3.jpg)
Solution 2:Solution of the problem with the nonexistent fun. LED is again green. The pulse generator to buying on auctions.
NOTE: it’s technical, so if you are not experienced, please be careful to try this; otherwise, you may destroy your ICOM mux. And the solutions are mainly available for ICOM A2 (China, clone)as follows:http://www.wobd2.com/wholesale/bmw-icom-a2-b-c-diagnostic-tool-with-programmer.htmlhttp://www.wobd2.com/wholesale/icom-a2-wifi-with-software.html