wnt company introduction 2
TRANSCRIPT
Wintek Electronics Technology Limited
Contents
Wintek R&D Structure
Test Center
Wintek Introduction
Introduction to LED Drivers
4
1
2
3
Introduction LED Driver 1
Development of LED Drivers
First Generation
Fixed Output;
Input Voltage Range: 90-305Vac;
Basic protection:IP67+4KV Surge Protection。
Second Generation
Programmable:Output Current, Fixed Time Dimming, etc.
Intelligent Functions:3in1, Dali, etc.
Enhanced Protection:6KV surge protection and up.
Now, Third Generation
By Application:None-Isolated VS Isolated, Water-proof VS None Water-
Proof type;
By Area: 249Vac-528Vac, Class II, etc;
Best Protection: 10KV Surge Protection for Strictly Application
Better Design: Customized Products VS Standard Products.
First Generation of LED Drivers
Fixed Design, Less Flexibility
Single Stage Topology, Lower Cost
Higher Output Ripple Current
Ordinary Efficiency
Ordinary Performance in THD&PF.
EMI&Surge against unit
AC Passive PFC
Flybackunit
Rectifier unit
ConstantI/V
controller
Flyback controller
Main power circuit
Single stage topology power supply
90~305Vac Bridge rectifier LED module
First Generation of LED Drivers
Fixed Design, Less Flexibility
Two Stage Topology
Flicker Free
Better Performance in THD&PF
LLC Resonant Half-Bridge Topology with Better Efficiency
and Less EMI Issue.
AC Active PFC
LLCunit
Rectifier unit
ConstantI/V
controller
LLC controller
PFC controller
Two stage topology power supply
90~305Vac
EMI&Surge against unit
Bridge rectifier Main power circuit LED module
Second Generation of LED Drivers
Programmable
Function for More
Flexibility
Wide Output Voltage
Range to Cope With
Different LED Design
Circuit
Better Surge
Protection
More Intelligent
Control Functions
EMI&Surge against unit
AC Active PFC
LLCunit
Rectifier unit
ConstantI/V
controller
LLC controller
PFC controller
0~10V/PWM/ resistance three in one
Infrared/timing dimming
DALI dimming
Intelligent dimming module
90~305Vac Main power circuit LED module
Intelligent dimming Power supply
Bridge rectifier
Third Generation of LED Drivers
By Application: None-Isolated Design for Best Cost
Efficiency Higher than 90%
Recommend for Indoor Application with Less
requirement in Surge Protection
Single Stage Design with Higher Output Ripple
Ordinary Performance in THD&PF
EMI&Surge against unit
AC
Controller IC
200~240Vac Bridge rectifier Main power circuit LED module
Non isolated power supply
Third Generation of LED Drivers
By Area: 249Vac to
480Vac
Suitable for North
American and
Three Phase Input,
No need to add a
step down
transformer ahead
of the driver.
Programmable and
Intelligent Control
Functions are the
optional functions
according to the
requirements
10KV surge
protection is
available
EMI&Surge against unit
AC Active PFC
LLCunit
Rectifier unit
ConstantI/V
controller
LLC controller
PFC controller
0~10V/PWM/ resistance three in one
Infrared/timing dimming
DALI dimming
249~528Vac Main power circuit LED module
Intelligent dimming module
Intelligent dimming Power supply
Bridge rectifier
•0-10V、PWM
•DALI
•Dim to off
•Others
•Optimized Performance
•Cost-Effective Design
•Optional Functions
•Street Lighting
• Indoor Lighting
•Less requirements for protection
•Common:100-240Vac
•European:220-240Vac
•USA:277-480Vac
By Area By
Application
More Dimming Method
Customized Design
Characters of the Third Generation
Wintek Product Family
90-305Vac Input
10KV Surge Protection
Output Power:40W-
320W
IP67
Programmable
Dimming Functions:
Fixed time dimming,
3in1.
Programmable LED Driver
180-305Vac Input CLASS II Type&CLASS I Type
Output Power:40W-
200W
IP67
Programmable
Dimming Functions:
Fixed time dimming,
3in1, DALI
Dim to off
AUX output available
Standby Power<0.5W
DALI LED DRIVER
249-528Vac Input
6KV Surge Protection
Output Power:60W-
200W
IP67
Programmable
Dimming Functions:
Fixed time dimming,
3in1.
High input voltage
led driver
90-305Vac Input
Constant Voltage
Output
6KV Surge Protection
Output Power:35W-
320W
IP67
12V/24V/36V/48V
Constant voltage led driver
90-305Vac Input
10KV Surge Protection
Output Power:40W-
320W
IP67
Programmable
Dimming Functions:
Fixed time dimming,
3in1.
Recommend for
High/Low bay light
application
Round case industrial
led driver
Wintek Product Family
12V,24V,48Vac Input
Output
Voltage:5V/12/15V/24V
Isolution
Miniaturization, low profile,
high efficiency, power-
saving, low noise designs
Recommend for in dustrial
and electronic equipment,
telecom, medical,
automotive, lighting, and
more
DC-DC converter
Wintek Intelligent Control Module
3in1 DB 0-10V
PWM
Resistance
Programmable DB 3 in 1 Dimming
Fixed time dimming
Programmable
Dali DB Dali dimming
Programmable
Standard VS Customized
Standard Products
Less Recourse Needed
Standard 5 years Warranty
Ordinary Performance
Fixed Mechanical Frame
Higher Cost
Suitable for Channel Selling
Customized Products
More Resource Needed
Specified Warranty
Better Performance
Specified Mechanical Frame
Lower Cost
Possible for Key Account
How to DO?
Capability
• Experienced Design Team
• Successful Design System
Resource
• Verified Test Schedule
• Available Product Platform as options
Plan
• Close Team-Work with Customers
• Clear Development Roadmap
Wintek R&D System 2
R&D Structure
CTO
Develop Dept.
E-Design 1 E-Design 2 Mechanical
Team Software
Team Layout Team
Advance Eng. Dept.
QAE Others
PM
Initial Design
Criterial
Schedule
Design
Proposal
Design
CONCEPT KICK OFF Prototype EVT DVT PVT
Engineering
Verification
Proposal
Verification
Project
Management
Incoming
Evaluation
Test
Verification
Pilot Run
Verification
Business
Evaluation
Cost-Performance
Evaluation
Team-Work with
Customer
Schematics,
Layout and
Component
Design
Sample
Building
Draft Test
Optimized
Design per
Design Spec.
Clear Safty,
EMI/EMC
Issues
Engineer
Test report
Reliability
Test Report
Finalize
Design
Apply for
Necessary
Certification
PVT Report
Optimized Design
per DFM
Requirements
Certification
Available
Documentation for
the Project
Development Flowchart
Key technology in our products have been applied national patents, we have got 126 national patents up to now, including 16 of invention.
IP – Patented Technology
Our Strength
Know How?
Key Characters in terms of different LED applications
Technology Trend
Key factors of the Supply Chain
Professional Marketing Service Team
Technology
Plenty of Technology Platforms as option
Fast Response with Modulized Design
Advance Engineering to access the latest Technology
Experience in Working with Key Customers
Production
DFM Procedure from long time experience
Stable and High Quality Supply Chain
Traceable Production System
Certified ISO system
Product Roadmap
300W/450W/
600W Drivers
100-240Vac
220-240Vac
277-480Vac
CV Dimming
Drivers
2KW Dimming
System
2017 2018 2019
PIR Control
Module
Radar Sensing
Module
Intelligent
Indoor Drivers
Test Center 3
Test Center
CE Lab
EMC-Radiation
Conduction
Lightning & Surge
ESD
EFT
Surge
Environment Lab
Thermal Shock
High Temperature
Low Temperature
High Temp. & Humidity
Salt Spray
Mechanical Lab
Vibration
Drop
Impact
Cable Lifetime
Bending
Plug Lifetime
Lifetime
HALT
HASS
TMTBF
IP Rating
Safety
Withstand Voltage
Current Leakage
Temperature Rise
Input & Output Power
Thermal Imaging
Heat & Flame
Resistance of Heat
Resistance of Flame
RoHS
RoHS
Test Center Structure
Lab. Instruments
High Accelerated Lifetime & High Accelerated
Screening Test Chamber
Constant Temperature & Humidity Test Chamber
HASS/HASA
Stress Screening Test Chamber Thermal Shock Chamber
Programmable Temperature & Humidity
Chamber
Lab. Instruments
Japanese RoHS Tester Chroma Power Supply
Test System Digital Oscilloscope
Salt Mist Tester Metallurgical Microscope Glow Wire Tester
Lab. Instruments
Vibration Apparatus Temperature Imaging Drop Test Machine
Plastics Horizontal Burning Test Apparatus
Dump testing Machine Sway Tester
Lab. Instruments
Wintek Introduction
4
Shenzhen Factory
• Headquater in Shenzhen Established in 2008
Products :60% domestic markets,40% exported to
100 countries and region worldwide,offer ODM and
customs design LED Driver and DC-DC converter
• Near 700 employees
• The sales turnover keep 20% increasing each year
About US
Factory (Produce LED drivers, DC-DC converter) 30000 Square meters, around 400 workers, LED driver production capacity 20,000pcs/shift.
Facilities
Production Process
Customer List
Lighting Project
LED illumination in Germany hotel LED road+urban light in Italy
LED high bay in 4S shop Guangzhou LED grow light
Thank You! www.wntpower.com