Certifications by DNV-GL ü ISO 9001:2008

ü

ü IP 66 & IP 68

v Symmetrical Yokes v Canted Yokes v Rack and Pinion v ALL Stainless Steel v Stainless Steel Cylinders v Manual Overrides v Hydraulic Overrides v Power Packs v Automation v Standard Range: -20℉ to 210 ℉

o Optional Range: -65 ℉ to 300 ℉

Ø Pneumatic Scotch Yoke Actuators § Light and Heavy Duty

Ø Hydraulic Scotch Yoke Actuators. Ø Rack & Pinion Actuators.

Ø Fail-Safe Open & Close.

Worldwide Actuators!

TURNING VALVES AROUND THE WORLD

Our torque ranges from 1,000 Lbs-in-12,50,000 Lbs-in. Reach us for custom built Higher Ranges

Actuators for On-Off, Modulating Quarter Turn Valves (Ball, Butterfly, Plug & Damper Valve)

WMS Technologies Pvt. Ltd.

®

• 50 microns of Aluminum Hard Anodized Actuator Housing surface to provide wear resistance & corrosion resistance

• Steel/Aluminium Rack with steel pinion coated. • Co-axial long life springs. • Seals in optional Available in NBR, VITON, Floro silicon material. • Polyacetal Piston guide support instead of conventional Sleeve. • Prototypes tested for over 1,00,000 cycles. • Bi-Directional Travel Stops (± 4º)

Supply Pressure: 40-160psi Output Torque: 555630 lbs-in

• Ductile Iron Housing, End Caps, Xylan Coated / SS 316 Cylinders provide long life & low cost option.

• Long Life, Low Friction, Easy & Low cost Maintenance. • 17-4 PH / AISI 4340 Yoke. • Symmetrical Scotch-Yoke / Canted Mechanism with High-End

Bearings for Maximum O/P throughout the Stroke. • “Super Safe” Spring Design, Easy and Safe to Dis-engage • Bi-Directional Travel Stops (± 4º)

• High Pressure Direct Gas / Hydraulic Actuator, high performance and extremely compact.

• Ductile Iron Housing • SS 316 / Coated Cylinders • Easy Automation Possible. • 17-4 PH / AISI 4340 Yoke • Symmetrical Scotch Yoke / Canted Mechanism with High End

Bearings for Maximum O/P at the beginning and End of the Stroke

A C T U A T O R , L I G H T & H E A V Y D U T Y D O U B L E A C T I N G A N D S P R I N G R E T U R N C A R T R I D G E M O D E L S

A C T U A T O R , H I G H P R E S S U R E , D I R E C T G A S / H Y D R A U L I C M O D E L S

• Stainless Steel Trim Provides excellent Internal and External Corrosion Resistance.

• Scotch-Yoke Mechanism with High End Bearings for Efficient Output throughout the stroke.

• Long Life, Ease & Safe Handling and Maintenance. • 17-4 PH / AISI 4340 Yoke for effective reciprocating force • Bi-Directional Travel Stops (±4º) • “Super Safe” Spring Design, Easy and Safe to Dis-engage

A C T U A T O R , C O M P A C T , L I G H T D U T Y & H E A V Y D U T Y D O U B L E A C T I N G A N D S P R I N G R E T U R N M O D E L S

Supply Pressure: 40-160 psi Output Torque: 555630 lbs-in

Supply Pressure: 40-160 psi Output Torque: 138760 lbs-in

Supply Pressure: 400-2250psi Output Torque: 1027780 lbs-in

A C T U A T O R , L I G H T & H E A V Y D U T Y D O U B L E A C T I N G A N D S P R I N G R E T U R N S T A I N L E S S S T E E L T R I M M O D E L S

A C T U A T O R , R A C K A N D P I N I O N S I N G L E A C T I N G & D O U B L E A C T I N G

Supply Pressure: 4 to 7 Bar Output Torque: upto 5000

Nm

• Spring Return Cartridge models are designed for very safe and easy maintenance.

• Ductile Iron Housing • SS 316 / Coated Cylinders • 17-4 PH / AISI 4340 Yoke • Symmetrical Scotch Yoke / Canted Mechanism with High

End Bearings for Maximum O/P at the beginning and End of the Stroke • Bi-Directional Travel Stops (± 4º)

We can meet all your VALVE ACTUATION needs from :Mounting Brackets, Solenoid Valves, Air Filter Regulators, Limit Switches, Position Indicators, Tubing & fittings Remote Actuation & Power Packs

A C T U A T O R , S P E C I A L F E A T U R E S

A C T U A T I O N A C E S S O R I E S

• Cylinder of MS (Xylem Coated)/ SS options to choose based on application and Economics • Yokes of 17-4 PH or AISI 4340 optional • Output Shaft of High Alloy Steel to Transmit Heavy Torque without Fatigue. • Output Shaft & Adaptor designed to Transmit Torque Uniformly. • Chrome Plated Alloy Steel Piston Rod provides strength, corrosion resistance and endurance. • Heat Treated High Alloy Thrust Pins and Rollers offer good Transfer Force with less friction • Sintered, self lubricating Bronze Bushings offer minimum Friction resistance, precise alignment,

reduced maintenance and enhanced actuator life. • Bi-Directional Stops Provided. • High Alloy High strength Thrust-roller Bearing ensures effective force transmission with negligible

co-efficient of friction • Optional Hydraulic & Manual overrides provided for emergency operating conditions • ISO 5211 Mounting pattern promotes adaptation to Internationally recognized standards. • Namur Drive Slot on Output Shaft enables direct mounting of accessories driven components

without intermediaries. • Option of Cartridge type / Regular Spring; can be mounted/un-mounted safely without special

tooling. Springs can be chosen from indigenous and imported sources. • IP 66 & IP 68 Compliant / CE Certified on Request / Third-Party Inspection feasibility.

17-4PH / AISI 4340 Provides high performance actuation with (90° Dual Keyway as shown) bi-directional mounting ability.

Output shaft and Adaptor Square- slot engagement ensures perfect transmission of Torque with minimum wear and tear.

ISO5211-Pattern Actuator Mounting Bracket or Crossover Spools for Installing Actuators on various sizes of valve flanges and also for safe & Compact operation

A C T U A T O R F E A T U R E S & B E N E F I T S

ON-Off Stroke / ESDV/ SDV/ROV/GOV & GP Operation Applications

Worldwide Actuators! TURNING VALVES AROUND THE WORLD

GLOBAL SALES 5800, CUNNINGHAM ROAD, HOUSTON, TEXAS, 77041 UNITED STATES OF AMERICA

INDIA – ASIA Sales PLOT NO 39, GIDC, MANJUSAR DIST: VADODARA, TAL: SAVALI GUJARAT: INDIA 391995 www.wwms-india.com Reach us: sales@wwms-india.com Office: +91 2667 2647 34/35/31 Cell: +91 9737969991 / 2

WMS Technologies Pvt. Ltd.

®

www.wwms-usa.com Reach us: sales@wwms-usa.com Office: +1 281-760-1491 Cell: + 1 832-626-7904

INDIA-REACH • Mumbai • New-Delhi • Chennai • Kolkatta • Pune • Bangalore • Hyderabad & Many More