wireless physical inventory and cycle count scanning and cycle count scanning ... available,this...

Add efficiency to your business with PDA interfaces and bar code applications Now you can input and retrieve valuable information from your Epicor™ system whenever and wherever you are with our customized mobile computing solutions. Our bar code and PDA applications are Microsoft-based, and run on Pocket PC devices. You don’t have to have an existing Web site linked to your Epicor system. Our applications are stand-alone, so there is no additional software required for you to use our applications. All updates to your database use your existing ManFact™, DataFlo™ or Avanté™ business rules, so you can be assured of the integrity for every transaction. Take a closer look at Wireless Count Scanning This time-saving application makes inventory counting easier, quicker and more a c c u rate than manually entering count ca rds. This screen guides you through the following counting process: To begin, scan the count tag number. The part number is automatically loaded for verification purposes. On a blank tag, scan or select a part in the control group. The button can be used conveniently and quickly to find the part number or to trigger an inventory quantity lookup. Quality Software Solutions, Inc. 928.443.9990 Fax: 928.443.9991 • www.qss.net • e-mail: [email protected] 1515 North Happy Valley Road, Prescott, AZ 86305 Microsoft is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. DataFlo, ManFact & Avanté and Epicor are products, copyrights and trademarks of Epicor Software Corporation. UniVerse & UniData are products, copyrights and trademarks of IBM Software. See how QSS can make your system revolve around your business. Wireless Physical Inventory and Cycle Count Scanning If bin-stocking is used at the location being counted, the bin location is then scanned and the corresponding inventory location is automatically loaded. The button can be used to conveniently and quickly list bins that contain the part. If the part is lot-controlled, the lot is scanned or entered. The button can be clicked to list the lot numbers that exist for the part. Now enter the count quantity. If the part is serial controlled, the serial numbers may be scanned or selected as desired. A void flag enables you to void or un-void the tag as needed. If additional information is required, red highlighted radio buttons will appear for the user to enter O/P details, Serial Numbers or the QA ID for the count. When you click on the appropriate radio button, a selection screen will appear for scanning or selecting the required information. When you click the button, tag updates occur and are staged for reporting and processing. Although custom tailoring options are available, this process supports all baseline physical inventory and cycle counting functionality that is logical for mobile applications. This means that regardless of the system features that you use, you can start scanning today without any custom changes! Get your business connected with QSS featuring Microsoft® .NET framework-based applications.

Upload: dinhtruc

Post on 29-Mar-2018

228 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Wireless Physical Inventory and Cycle Count Scanning and Cycle Count Scanning ... available,this process supports all baseline physical inventory and cycle counting

Our bar code and PDA applications areMicrosoft-based, and run on Pocket PCdevices. You don’t have to have an existingWeb site linked to your Epicor system. Ourapplications are stand-alone, so there is noadditional software required for you to useour applications. All updates to yourdatabase use your existing ManFact™,DataFlo™ or Avanté™ business rules, soyou can be assured of the integrity for everytransaction.

Take a closer look at WirelessCount ScanningThis time-saving application makesinventory counting easier, quicker and morea c c u rate than manually entering count ca rd s .

This screen guides you through thefollowing counting process:

To begin, scan the count tag number. Thepart number is automatically loaded forverification purposes.

On a blank tag, scan or select a part in thecontrol group. The button can beused conveniently and quickly to find thepart number or to trigger an inventoryquantity lookup.

Quality SoftwareSolutions, Inc.

928.443.9990Fax: 928.443.9991 • www.qss.net • e-mail: [email protected] North Happy Valley Road, Prescott, AZ 86305

Microsoft is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. DataFlo, ManFact &Avanté and Epicor are products, copyrights and trademarks of Epicor Software Corporation. UniVerse & UniData are products, copyrights andtrademarks of IBM Software.

See how QSScan make yoursystem revolvearound yourbusiness.

Wireless PhysicalInventory and Cycle

Count Scanning

If bin-stocking is used at the location beingcounted, the bin location is then scannedand the corresponding inventory location isautomatically loaded. The button canbe used to conveniently and quickly listbins that contain the part.

If the part is lot-controlled, the lot isscanned or entered. The button canbe clicked to list the lot numbers that existfor the part.

Now enter the count quantity. If the part isserial controlled, the serial numbers may bescanned or selected as desired.

A void flag enables you to void or un-voidthe tag as needed.

If additional information is required, redhighlighted radio buttons will appear forthe user to enter O/P details, SerialNumbers or the QA ID for the count.When you click on the appropriate radiobutton, a selection screen will appear forscanning or selecting the requiredinformation.

When you click the button, tagupdates occur and are staged for reportingand processing.

Although custom tailoring options areavailable, this process supports all baselinephysical inventory and cycle countingfunctionality that is logical for mobileapplications. This means that regardless ofthe system features that you use, you canstart scanning today without any customchanges!

Get your business connected with QSS featuring Microsoft® .NET framework-based applications.

Weekly Cycle Count Report 01 Week

Cycle Count Specific Items - ABC Analysis

MAPICS XA Cycle Counting in Materials Management Cycle... · Cycle Counting in Materials Management Presented by ... documents can be generated after the inventory count items are

Word Count: 1,834 Cycle - 5TH GRADE MRS. L€¦ · The changes and movement of Earth’s water are all parts of the water cycle. The water cycle has been going on for billions of

XA Cycle Counting and Cistech RF Physical Inventory Cycle... · MM Cycle Counting and Cistech RF Physical Inventory ... Cycle Count/Physical Inventory ... number of items selected

What's the big deal about Cycle Counting ... - cdn ...cdn.promatshow.com/seminars/assets-2017/1235.pdfCYCLE COUNT 47% PHYSICAL INVENTORY + CYCLE COUNT 48% ... (WMS) prioritize and

Consequence Scanning - Doteveryone · Consequence Scanning, organisations will be able to anticipate and address concerns they might have early on in the development cycle, before

All About Inventory · 2017. 5. 17. · Inventory Management Cycle Counts Process flow: a. Choose which items to count b. Start Count - NetSuite takes a snapshot of the on-hand count

FUSION ERP Inventory Cycle Count · PDF file · 2011-10-27 | 888.860.2074 | Offices in Seattle & Wenatchee FUSION ERP Inventory Cycle Count Process This document describes the process

Cycle count data 2014/15 - DOT Home · 2020. 12. 10. · Cycle count data 2014/15 Page 6 of 13 Most of the sites where a counter has been installed since 2008/09 experienced strong

Cycle Counting & Inventory Record . . . . . . . . . · PDF fileCycle Counting & Inventory Record Accuracy There’s More To Cycle Counting Than ... If we cycle count 100 items (beans)