wireless link for controlling and monitoring electronic billboards
DESCRIPTION
Wireless Link for Controlling and Monitoring Electronic Billboards. Presented by : 05gr797 Bayu Anggoro Jati Nurul Huda Mahmood Puri Novelti Anggraeni Satya Ardhy Wardana. INTRODUCTION. CHANNEL. MODULATION TECHNIQUE. ACCESS TECHNIQUE. SIMULATION. RESULT AND DISCUSSION. MOVING FORWARD. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/1.jpg)
Wireless Link for Controlling and Monitoring Electronic Billboards
Presented by : 05gr797Bayu Anggoro Jati
Nurul Huda MahmoodPuri Novelti AnggraeniSatya Ardhy Wardana
![Page 2: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/2.jpg)
INTRODUCTION
CHANNEL
MODULATION TECHNIQUE
ACCESS TECHNIQUE
SIMULATION
RESULT AND DISCUSSION
MOVING FORWARD
WORKING PROCESS
![Page 3: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/3.jpg)
INTRODUCTION
![Page 4: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/4.jpg)
Electronic Billboard
"These animated, electronic billboards incorporated into network sign systems enable advertisers to bring a specific message at a specific time to a specific audience …”[1]
[1] Benoit Strauven, marketing manager at Barco
![Page 5: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/5.jpg)
Current trends
Today the network of electronic billboards are connected through:– Internet: Last mile provided through DSL or wifi
• DSL lease is expensive and high setup cost for remote location
• Existing wifi structure is not so wide.
– Satellite• In large metropolitan areas, having a satellite setup is costly.
– Using existing GSM cellular connection• Practical upload rates of 56 Kbps
Too slow to be uploading a 1 GB file (5 hours)
![Page 6: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/6.jpg)
Current trends
source: Trask, Richard F. How InfoChannel works. www.scala.com
![Page 7: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/7.jpg)
Problem Definition
• If the billboards could be connected via a wireless network that is cost effective and easily scalable, it would be possible to deploy electronic billboards virtually anywhere.
• In this project we are going to design the wireless link for such a network.– Listen to HEARTBEAT of the billboard– Upload advertisements/information
![Page 8: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/8.jpg)
Design Consideration
The main design objectives are:
• Operating in unlicensed band (we have to deal with interference)
• Reliability (sufficiently fast and with minimum error)
• Security (avoid any sort of interception on the link and upload unwanted message)
• Low cost
![Page 9: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/9.jpg)
Key AssumptionsAssumptions from P0[1]
• The data size is 1 Gb• The data rate is 2 Mbps• Low cost system• The distance is 10 kilometers• Static Station• Works in Unlicensed Band• Wireless link implements spread spectrum
technique[1] 05gr797 P0 Project Report
![Page 10: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/10.jpg)
Key Assumptions
Assumptions made for P1 • Unlicensed band used is 2400-2483.5 MHz[1]
• Don’t consider antenna type, assuming – The central use 8 -15 dBi omnidirectional antenna[2]
– Billboards use 14 - 30 dBi directional antenna[3]
• Noise Figure is around 3 dB[4]
• Revised Data Rate is 512 kbps, thus bandwidth is 1 MHz• The distance is 4 kilometers at maximum
[1] 05gr797 P0 Project Report[2] 2.4 GHz Outdoor Omnidirectional Antenna. Hyperlink Technologies. http://www.hyperlinktech.com/web/ antennas 2400 out omni.php#. 28 November2005.[3] 2.4 GHz Outdoor Directional Antenna. Hyperlink Technologies. http://www.hyperlinktech.com/web/ antennas 2400 out directional.php#. 28 November 2005.[4] 2.4GHz Wireless High-Gain Antennas.SMC. http://www.multitaskcomputing.co.uk/wireless/80211b/SMC%20HIGH%20GAIN.pdf. 27 November2005.
![Page 11: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/11.jpg)
P1 Scope and Outline
The designed link is between central and billboard. The link is semi duplex.
• Theoretical background of several modulation techniques and access techniques are studied. Channel properties in deployment environment are investigated.
• Decisions on system parameters are made based on properties of deployment environment.
• Decision about modeling and simulation techniques are made considering our system design.
• Simulation is performed and result are taken and evaluated to our initial requirements.
![Page 12: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/12.jpg)
CHANNEL
![Page 13: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/13.jpg)
Channel Properties
• Fading
• Path Loss Model
• Link Budget Calculation
• Coherence Bandwidth
• Coherence Time
• Channel Propagation Model
![Page 14: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/14.jpg)
Fading
• Envelope Fading
Due to propagation loss, results in path loss
![Page 15: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/15.jpg)
Path Loss Model
• Proposed model with correction factor based on empirical derived model[1]
• The model is calculated for 100m distance but upscaled to meet our distance requirement. besides that, some terrain correction factor is also added in γ.
00
0
10
420 ( )
L
dP A log s d d
d
dA log
[1] Erceg, V. et. al. An empirically based path loss model for wireless channels in suburban environments. IEEE JSAC, vol. 17, no. 7, July 1999, pp. 1205-1211.
![Page 16: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/16.jpg)
Path Loss Model
• This model is proposed for a receiver antenna height of 2 m and operating frequency of 2 GHz.
• ΔPLf is correction factor for freq as Δ PLh is for height[1]
mod f hPL PL PL PL
[1] Erceg, V. et al. Channel models for fixed wireless applications, IEEE 802.16 Broadband Wireless Access Working Group. 2001-07.
![Page 17: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/17.jpg)
Link Budget
• Overall Link Budget Calculation
LINK BUDGET CALCULATION
Transmitted Output Power 5 dBm
Transmit Antenna Gain 15 dB
Effective Radiated Power 20 dBm
Path Loss -148.6 dB
Receiver Antenna Gain 35 dB
Receiver Noise Figure 3 dB
Receiver Equivalent Noise Bandwidth 10 MHz
Receiver Sensitivity -114 dBm
Noise Fade Margin 20.4dB
![Page 18: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/18.jpg)
Link Budget
Path Loss
Noise Margin
148.6 dB
20.4 dB
EIRP = 20 dBW
Received Power = 78.2 dBW
![Page 19: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/19.jpg)
Fading
• Flat and Frequency Selective Fading– Because of multipath effect– From maximum delay spread can be
investigated the coherence bandwidth
• Slow and Fast Fading– Because of the movement of the environment– From doppler spread can be investigated the
coherence time
![Page 20: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/20.jpg)
Coherence Bandwidth
• RMS delay spread = 0.13 μs[1]
• Coherence BW = 1.3 MHz• Thus, the uncorrelated frequency separation
(with autocorrelation < 0.05) = 5.83 MHz• freq selective channel => wideband channel• From coherence bandwidth, required separation
between frequency to ensure uncorrelated frequency is 6 MHz
[1] Porter, J.W. and J.A. Thweatt. Microwave propagation characteristics in the MMDS frequency band. ICC2000 Conference Proceedings, pp. 1578-1582.
![Page 21: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/21.jpg)
Coherence Time
• Doppler frequency in similar environment = 2 Hz[1]
• Coherence Time = 50 ms
• We choose to have a time invariant channel thus, dwell time have to be below 50 ms
• dwell time 31 ms => hop rate = 32 hop/s
[1] Erceg, V. et al. Channel models for fixed wireless applications, IEEE 802.16 Broadband Wireless Access Working Group. 2001-07.
![Page 22: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/22.jpg)
Coherence Time
Measured doppler spectra for fixed wireless channel at 2.5GHz[1]
[1] Erceg, V. et al. Channel models for fixed wireless applications, IEEE 802.16 Broadband Wireless Access Working Group. 2001-07.
![Page 23: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/23.jpg)
Channel Propagation Model
• Rayleigh Channel
• Rician Channel
![Page 24: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/24.jpg)
Channel Propagation Model
• We choose rician because our application has one strong LOS component
• K factor = 0.5[1]
• The measurement was done in 1.9 GHz but can safely adopted in 2.4 GHz[2]
[1] Greenstein, L.J., S. Ghassemzadeh, V.Erceg, and D.G. Michelson. Ricean K-factors in narrowband fixed wireless channels: Theory, experiments, and statistical models. WPMC99 Conference Proceedings, Amsterdam, Sep 1999.[2] Erceg, V. et al. Channel models for fixed wireless applications, IEEE 802.16 Broadband Wireless Access Working Group. 2001-07.
![Page 25: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/25.jpg)
Channel Summary
• System Bandwidth is 1 MHz which is below coherence bandwidth of 1.3 MHz. Uncorrelated frequency spacing is 6 MHz
• Channel dwell time is 31 ms.• The channel is wideband channel and will
be modeled as Rician fading channel.• We have ensure that the channel has
properties of Time invariant channel and frequency of each channel is uncorrelated.
![Page 26: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/26.jpg)
MODULATION TECHNIQUE
![Page 27: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/27.jpg)
Modulation• Definition: Modulation is the process of
using the carrier signal to carry the message signal.
• Three parameters of sinusoid signal: amplitude, frequency, and phase– This will results in different modulation
techniques
![Page 28: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/28.jpg)
Consideration to choice a suitable modulation scheme
• High spectral efficiency (bps/Hz)• High power efficiency • Low cost and easy to implement• Robust
➔Trade off between simplicity and performance
![Page 29: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/29.jpg)
Digital Modulation Classification
• Linear and non-linear modulation– Relation between modulated and modulating
signal
• Coherent and non-coherent modulation– Synchronization in the receiver
• Constant and non-constant envelope– Amplitude of the modulated signal
![Page 30: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/30.jpg)
Digital Modulation Techniques
Some digital modulation techniques are:
• Amplitude Shift Keying (ASK)
• Frequency Shift Keying (FSK)
• Phase Shift Keying (PSK)
• Differential Phase Shift Keying (DPSK)
• Other advance modulation techniques: – GMSK, M-QAM, and so on
![Page 31: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/31.jpg)
Modulation Techniques Classification
Yes No Yes No Yes NoASK v v vFSK v v * vPSK v v DPSK v
* : non-coherent FSK
Linear Coherent Constant Envelope
![Page 32: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/32.jpg)
Theoretical BER vs SNR Comparison
![Page 33: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/33.jpg)
Modulation Technique of Our System
• We consider the modulation technique which has less complexity (which means without synchronization) and good BER performance
• We choose DBPSK modulation technique which is non-coherent and has better BER performance than non-coherent FSK
![Page 34: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/34.jpg)
DBPSK Modem Block• Block diagram of DBPSK transmitter [1]
• Block diagram of DBPSK receiver [2]
[1] Haykin, Simon. Communication Systems 4 th ed.. John Wiley and Sons, 2001
[2] Feher, Kamilo. Wireless Digital Communication Modulation and Spread Spectrum Applications. Prentice Hall PTR, New Jersey : 1995
![Page 35: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/35.jpg)
Generation of DBPSK signalb(k) 1 0 0 1 0 0 1 1d(k-1) 1 1 0 1 1 0 1 1d(k) = b(k) XOR d(k-1) 1 1 0 1 1 0 1 1 1transmitted phase (rad) 0 0 0 0 0 0 0
Detection of DBPSK signalreceived phase (rad) 0 0 0 0 0 0 0d(k) 1 1 0 1 1 0 1 1 1d(k-1) 1 1 0 1 1 0 1 1b(k) = d(k) XOR d(k-1) 1 0 0 1 0 0 1 1
![Page 36: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/36.jpg)
Simulation of DBPSK Modulator and Demodulator
• We built our own DBPSK modulator and demodulator function for simulation in MATLAB based on the DBPSK block
• Compare them with MATLAB built in DBPSK function and theoretical DBPSK BER to verify our DBPSK modem function
![Page 37: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/37.jpg)
Performance of DBPSK (BER over SNR) in AWGN Channel
![Page 38: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/38.jpg)
Performance of DBPSK (BER over SNR) in AWGN Channel: Discussion
• The simulation result shows that our DBPSK modem seems to has a better performance than the theoretical formula and DBPSK built in MATLAB function.
• We found that the problem is in our DBPSK demodulation function.
• Our function does not consider the imaginer part but only the real part of the signal.
• We were not using our DBPSK function in overall system simulation
![Page 39: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/39.jpg)
Summary of Modulation Technique
• Our design criteria are low cost and good performance. Thus we chosen DBPSK as modulation technique since it has a good trade off between the performance and simplicity
• We were not using our DBPSK modem function in the overall system simulation since we could not fix the problem in our DBPSK demodulation function
![Page 40: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/40.jpg)
ACCESS TECHNIQUE
![Page 41: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/41.jpg)
What is Access Technique
• Digital Modulation maps the message signal to a constellation point.
• To transmit, the constellation point has to be mapped to a real frequency.
• Access Technique is a method to do that.
![Page 42: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/42.jpg)
Design requirement
• Our design preferences:
– Susceptibility– Communication over long distance– Relative immunity to interference – Low cost and therefore simplicity– High data rate is not a major design
requirement
![Page 43: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/43.jpg)
What is Spread Spectrum
• Modulated waveform spread to a broader portion of the radio frequency
• Bandwidth of the transmitted signal is much greater than that of the original message
• Two types, Frequency Hopping (FHSS) and Direct Sequence (DSSS)
![Page 44: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/44.jpg)
FHSS
• The wide bandwidth is divided into narrow sub-bands or channels
• The message signal is hopped from one channel to another.
• At the transmitter, the modulated message signal is transmitter at a transmit frequency determined by certain hopping algorithm.
![Page 45: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/45.jpg)
FHSS Example
Source: William Stallings, Data and Computer Communications, 7th Edition
![Page 46: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/46.jpg)
PN sequence generator
• A PN sequence generator generates a periodic PN sequence based on a hopping algorithm.
• The generated PN sequence is fed to a frequency synthesizer, which then determines the frequency channel at which to transmit the message frame.
• m bit PN generator identifies 2m -1 possible frequencies.
![Page 47: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/47.jpg)
FHSS Receiver
• At the receiver there is an identical PN generator synchronized with the received signal.
• Receiver therefore knows which at frequency current frame will be transmitted.
• Thus enabling correct detection and demodulation of the received signal.
![Page 48: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/48.jpg)
FHSS block diagram (transmitter)
Source: William Stallings, Data and Computer Communications, 7th Edition
![Page 49: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/49.jpg)
FHSS block diagram (receiver)
Source: William Stallings, Data and Computer Communications, 7th Edition
![Page 50: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/50.jpg)
Fast and Slow FHSS
• Two types of FHSS, Fast and Slow
• If the hopping rate > message symbol rate, it is fast FHSS
• If message symbol rate hopping rate, it is slow FHSS
• fast FHSS gives improved performance in noise (or jamming)
![Page 51: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/51.jpg)
Fast and Slow FHSS
Source: William Stallings, Data and Computer Communications, 7th Edition
Example: Slow FHSS with M =4 and m = 2
![Page 52: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/52.jpg)
Fast and Slow FHSS
Source: William Stallings, Data and Computer Communications, 7th Edition
Example: Fast FHSS with M =4 and m = 2
![Page 53: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/53.jpg)
Direct Sequence SS (DSSS)
• Spreads the signal by expanding it over a wide radio band.
• Frequency of the carrier is constant for each system.
• At transmitter, message signal is multiplied by PN sequence to spread the message signal.
• The spreading is proportional to number of bits used, a 10 bit spreading code spreads signal across 10 times bandwidth of 1 bit code.
![Page 54: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/54.jpg)
DSSS Transmitter
Source: William Stallings, Data and Computer Communications, 7th Edition
![Page 55: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/55.jpg)
DSSS Example
Source: William Stallings, Data and Computer Communications, 7th Edition
![Page 56: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/56.jpg)
DSSS Spectrum
Source: William Stallings, Data and Computer Communications, 7th Edition
![Page 57: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/57.jpg)
DSSS
• At receiver end, received signal is multiplied by the same PN sequence as in transmitter before demodulation to get back the original message signal.
• This de-spreads the received signal to the bandwidth of original message signal.
• Transmitter and receiver has to synchronized to have the same PN code.
![Page 58: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/58.jpg)
DSSS Receiver
Source: William Stallings, Data and Computer Communications, 7th Edition
![Page 59: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/59.jpg)
FHSS vs. DSSS:COMPARISON
![Page 60: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/60.jpg)
System Collocation
DSSS FHSS
Symbol rate = 11 Mcps
Each band 22 MHz, with separation of 30 MHz
Available BW = 83.5 MHz
3 systems can be collocated
79 different channels and 78 hopping sequences.
Grouped in three sets of 26 sequences.
Theoretically, 26 collocated FHSS systems.
Practically the number is around 10 to 15.
![Page 61: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/61.jpg)
Noise and Interference Immunity
DSSS FHSS
Wideband Interference
May completely block system.
Only part of the hops will be blocked
Narrowband Interference
Interference is multiplied with the spread code, thus spreading it. Immune to narrow band interference up to a great extent
Interference signal present on a specific frequency will block hops on that specific frequencies. Hops on other frequencies will not be affected.
![Page 62: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/62.jpg)
Illustration on how DSSS handles narrow band interference
Source: http://www.odessaoffice.com/wireless/fh_vs_ds.pdf
Noise and Interference Immunity
![Page 63: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/63.jpg)
Signals from nearby active transmitters may be received at the receiver at higher power than the intended user.
Near Far Problem
DSSS FHSS
Could make the receiver unable to extract information from intended user. Automatic power control required, thus increasing complexity.
Worst case will be that the other transmitter will block some hops, forcing the FHSS system to work in less than optimum conditions
![Page 64: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/64.jpg)
Multipath
DSSS is more sensitive to multipath than FHSS, especially when operating at higher bit rate.
DSSS FHSS
Multipath components generated due to signal reflection between transmitter and receiver,
The pulse is spread. So, narrow pulses of DSSS are more sensitive. Inter Symbol Interference
FHSS systems have better chances to be undisturbed by the presence of multipath effects.
Multipath components result in frequency selective fading.
As long as the average level is high enough, the DSSS receiver will be able to detect the radio signal.
FHSS systems have narrow bandwidth with signals located at different carrier frequencies.
Transmitted signal at significantly faded frequencies cannot be received accurately
![Page 65: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/65.jpg)
Throughput
DSSS FHSS
Single system:
IEEE 802.11 defines rates of up to 11Mbps, though practically up to 7 Mbps is achievable
In IEEE 802.11 standard FSSS system has throughput of up to 3 Mbps (2 Mbps practically)
Collocated system:
With three systems collocated:
net throughput of 3 X 7 = 21 Mbps.
Net throughput of 10~15 X 2 = ~25 Mbps.
![Page 66: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/66.jpg)
• DSSS provides higher capacity links, but it is very sensitive.
• FHSS system has lower capacity links, but is a more robust technology, with better performance in harsh environment
Comparison: Conclusion
![Page 67: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/67.jpg)
• Our design preferences:– Susceptibility– Communication over long distance– Relative immunity to interference – Low cost and therefore simplicity. – High data rate is not a major design requirement.
• Considering the performance of FHSS and DSSS, a frequency hopped system would better suit our requirement.
• Thus our Access technique is FHSS.
Spread Spectrum: Conclusion
![Page 68: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/68.jpg)
Frequency Hop code
• Hopping pattern in FHSS, driven by different hopping codes, is used to control the carrier frequency.
• Number of different hop codes• Example:
Linear Congruence Code (LCC), Quadratic Congruence Code (QCC), Cubic Congruence Code (CCC), Hyperbolic Congruence Code (HCC), Welch-Costas Array (WC), Lempel-Costas Array (LC)
![Page 69: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/69.jpg)
• Hop Sequence from IEEE 802.11 Standard– North America and most of Europe:
[b(i) + x]mod(79) + 2– Japan: [(i − 1)x]mod(23) + 73– Spain: [b(i) + x]mod(27) + 47– France: [b(i) + x]mod(35) + 48fx(i) is the channel number for ith frequency in xth hopping pattern.
• Designed to ensure some minimum distance in frequency between contiguous hops. In our application it is 6 MHz.
Frequency Hop code
![Page 70: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/70.jpg)
SIMULATION
![Page 71: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/71.jpg)
OVERALL MODELING BLOCK
![Page 72: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/72.jpg)
SIMULATION STEPS
• The first step :Verification of DBPSK modem block
• The second step :Verification of channel block
• The third step :Simulation for the whole system
![Page 73: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/73.jpg)
SIMULATION – CHANNEL BLOCK
• We used SUI5 3-tap delay model [1].
• SUI5 channel model defines a three tap delay model for a channel in urban terrain type with a τrms of 2.842 μs.
• For different antenna types (omnidirectional and directional antenna) and different K factors, different power levels at each of the inputs are defined.
[1] Erceg, V. et al. Channel models for fixed wireless applications, IEEE 802.16 Broadband Wireless Access Working Group. 2001-07.
![Page 74: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/74.jpg)
SIMULATION – CHANNEL BLOCK
Our parameter :– K factor = 0.5– RMS delay spread (τrms) is 0.13 μs. – We re-scaled the delay tapes into 0, 0.2 μs, and 0.4
μs respectively to fit our case (τrms of 0.122 μs).
![Page 75: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/75.jpg)
SIMULATION – CHANNEL BLOCK
![Page 76: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/76.jpg)
SIMULATION – CHANNEL BLOCK
![Page 77: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/77.jpg)
SIMULATION – THE WHOLE SYSTEM
• Access technique : FHSS • Digital modulation : DBPSK• The channel model : SUI5 3 tap delay model• Hop sequence : IEEE 802.11• Hopping distance : 6 MHz• Carrier frequency : 2.4 GHz• Number of channel : 32 • Hopping rate : 32 hops/second • Dwell time : 31 ms dwell time• Bitrate : 512 kbps• Bit size in one hop : 31 ms x 512 kbps ≈ 16 kbits
![Page 78: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/78.jpg)
SIMULATION – THE WHOLE SYSTEM
• The simulation is frame by frame • Hopping distance 6 MHz -> uncorrelated
• Monte Carlo simulation to get accurate resultThe simulation is repeated 10 times.
(considering the server capability and processing time)For BER up to 10−4 we generated 105 bit data ≈ (10 times 16kbit)
• Simulation without power controlSome hops can have higher fade that the others.This hops would result in higher bit error. Power control can overcome this problem (use higher power).We assume that power control has been implemented in place. We assume that every channel has the same condition
![Page 79: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/79.jpg)
SIMULATION – THE WHOLE SYSTEM
We simulated the performance of the system in :
– AWGN channel
– wideband channel using SUI5 3-tap delay model for directional antenna (billboard)
– wideband channel using SUI5 3-tap delay model for omnidirectional antenna (base station)
![Page 80: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/80.jpg)
RESULT&
DISCUSSION
![Page 81: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/81.jpg)
BER (Bit Error Rate) Requirement• number of bits received in error relative to number of
transmitted bits
• Our requirement : 10-4
– Bluetooth : 10-3 [1]
– Video transmission : 10-9 - 10-12 [2]
• Video quality is not so important because the distance between viewer and billboard is far
• Not a video streaming (error can be fixed by retransmission)
[1] Cavigioli, Chris. Bluetooth demands system tools. http://www.mwee.com/features/showArticle.html?articleID=12801538. 16 November 2005.
[2] http://www.fiber-optics.info/articles/dtv-hdtv.htm
![Page 82: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/82.jpg)
• number of bits that would result in the frame to be in error.
• For typical billboard, 14 bit used to represent one pixel. [1]
• We define if 1 pixel is error, i.e. 14 bits are received with error in one frame, then frame error has occurred.
[1] Electromedia. Techical Data of Large Outdoor Display. http://www.electromediaintl. com/services.html. 11 December 2005.
FER (Frame Error Rate) Requirement
![Page 83: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/83.jpg)
BER PERFORMANCE RESULT
BER 10-4 can be achieved at SNR of :• 11,5 dB for omnidirectional antenna• 14 dB for directional antenna
![Page 84: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/84.jpg)
FER PERFORMANCE RESULT
FER :- at 10,4 dB for omnidirectional antenna : 2.5 10−2
- at 12,8 dB for directional antenna : 4.5 10−2
![Page 85: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/85.jpg)
CONCLUSION
• On a bit level, we were able to achieve our target BER of 10−4.
• We can use SNR up to 20 dB to get better BER performance.
• On frame level, FER :– at 10,4 dB for omnidirectional antenna is 2.5 10−2
– at 12,8 dB for directional antenna is 4.5 10−2
![Page 86: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/86.jpg)
MOVING FORWARD
![Page 87: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/87.jpg)
MOVING FORWARD
The following issues that can be considered :
– Addressing scheme for the billboards
– Protocol for communication • setup and disconnect• Transferring data• Routing
– Time and frequency synchronization
– Designing a multihop network for wider area network
![Page 88: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/88.jpg)
WORKING PROCESS
![Page 89: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/89.jpg)
WORKING PROCESS
P0 Period
• All group member arrived two and half weeks late.
• We got a lot of new experiences in Aalborg University – project oriented learning
• We had a good relationship among members, clear job division, and cooperation from supervisor
![Page 90: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/90.jpg)
WORKING PROCESS
P1 Period
• Arrangement of our P1 timeline based on the problem definition and the scope of project.
• Meeting with supervisor once a week.
• Internal group meeting.
![Page 91: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/91.jpg)
WORKING PROCESS– P1 TIME LINE
![Page 92: Wireless Link for Controlling and Monitoring Electronic Billboards](https://reader035.vdocuments.site/reader035/viewer/2022062804/5681492e550346895db66ba2/html5/thumbnails/92.jpg)
WORKING PROCESS STRENGTH >< WEAKNESS
• Good relationship among the members.
• We divided our job based on the strength of each member.
• Flexible way of working.
• Good supervisor.
• Lack of project management.
• Punctuality.
• Our flexible way of working has its own weakness.