wire rope manufacturer - bridonbridon.co.nz/uploads/specials/bridon_servicesspecial.pdf · ndt...

2
Please contact your local Branch National Toll Free 0508 274 366 www.bridon.co.nz Services Manufacturing wire rope from 1.3 mm to 60 mm in diameter NDT Inspections - A non-invasive inspection of your critical wire ropes. Accurately detects broken wires and other defects both internal and external, in rope diameters 16 mm to 40 mm. New Zealand’s Largest Hydraulic Wire Rope Swaging Machine. 2000 tonne capacity. Manufacturing lifting slings up to 54 mm in diameter. Wire Rope Manufacturer New Zealand’s Only! Splicing and socketing. Bridon rigging staff provide splicing and socketing services (resin and white metal) for wide range of applications.

Upload: hoangkhuong

Post on 20-Aug-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

Please contact your local BranchNational Toll Free 0508 274 366

www.bridon.co.nz

Se

rvic

es

Manufacturing wire rope from 1.3 mm to 60 mm in diameter

NDT Inspections - A non-invasive inspection of your critical wire ropes.

Accurately detects broken wires and other defects both internal and external, in rope diameters 16 mm to 40 mm.

New Zealand’s Largest Hydraulic Wire Rope Swaging Machine.

2000 tonne capacity. Manufacturing lifting slings up to 54 mm in diameter.

Wire Rope Manufacturer New Zealand’sOnly!

Splicing and socketing.

Bridon rigging staff provide splicing and socketing services (resin and white metal) for wide range of applications.

Please contact your local BranchNational Toll Free 0508 274 366

www.bridon.co.nz

Se

rvic

es

Mobile Testing Services

Bridon operates load testing facilities for proof loading and certification of all types of lifting equipment at branches throughout New Zealand and can offer on-site testing vehicles at centrally located sites nationwide.

Bridon has New Zealand’s largest and most modern test beds and the only 200 tonnes test bed in the country.

Bridon’s highly trained personnel are bale to issue test certification in accordance with all current standards.

Bridon were a founding member of L.E.E.N.Z. Inc. formed in 1992 to promote the safe use of lifting equipment and adapt a common range of standards for New Zealand Industry.

New Zealand’s largest & most modern Test Bed!

Available throughout New Zealand!Our experienced operators provide value and convenience by coming out to your site where we will test, repair or replace your equipment as required.

With access to the latest standards you can be assured your equipment will fully comply with OSH regulations.

Bridon also operate load testing facilities for proof loading and certification of lifting equipment at most of our branches throughout New Zealand.

Contact your local test van operator or branch for more information today!