wika instruments ltd.apps.wika.com/approval_download/17ar-02747-20190208-crn_rev-0f02026_2c... ·...

WIKA INSTRUMENTS LTD. 3103 Parsons Road

Edmonton, AB Canada T6E 5K3 Tel: (780) 463-7035

Fax: (780) 462-0017

HEAD OFFICE WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD.. 3103 Parson Road 2679 Bristol Circle, Unit #1 4932 – 52 Street S.E. #204, 9804 – 100 Avenue 901 First Avenue North 4627 Frances Street Edmonton, AB Canada Oakville, Ontario L6H 6Z8 Calgary, AB Canada T2B 3R2 Grande Prairie, AB T8V 0T8 Saskatoon, SK S7K 1Y4 Burnaby, B.C. V5C 2R9 Tel: (780) 463-7035 Tel: (905) 337-1611 Tel: (403) 237-5960 Tel: ( 780) 513-7460 Tel: (306) 664-1105 Tel: (604) 299-3855 Fax: (780) 462-0017 Fax: (905) 337-2716 Fax: (403) 264-0095 Fax: (780) 513-7379 Fax: (306) 244-7037 Fax: (604) 299-4566

February 8, 2019 RE: 0F02026.2C Pressure Devices, Canada Wide CRN stamping To whom it may concern, In accordance with Section 4.3.2 of the CSA B51-09, “if a design is registered in all provinces and territories, the CRN stamped on the nameplate and marked on the data report may be shortened to include the designation of first registration plus the letter “C”…” Therefore WIKA INSTRUMENTS LTD has selected the option of stamping Canada wide approved Pressure Devices under the designation of “0F02026.2C”. Supporting documentation’s from all Provinces and Territories are attached in this document. Authorized Signature: ____________________ Date: February 8, 2019 Robert Woo, P.Eng Engineering Manager

$ffi E d m o nton, o, o" n": l:'"i: i:"-t[Tel: (780) 437-9100 / Fax: (780) 437-7787the pressure equlpment safety aulhorily

July 30, 2018

Attention: Robert Woo

WIKA INSTRUMENTS LTD

3103 PARSONS ROAD

EDMONTON, AB T6N 1C8

Email:[email protected]

The design subrnission, tracking number 2018-04567, originally received on July 13, 2018 was surveyedand accepted for registration as follows:

GRN : 0F02026.2 Accepted on: July 30, 2018

Reg Type: ADDITION TO ACC. FITTING Expiry Date: July 08, 2020

Drawing No. : 17AR-02747 Rev 3

Fifting type: PRESSURE GAUGE COMPONENTS

Design registered in the name of : WIKA ALEXANDER WIEGAND SE & CO KG

The registration is conditional on your compliance with the following notes:

- Ihe scope of this revision are the updated model number for electronic components as highlighted in blue inTable 1, 4, 7 of document 17AR-02747. lt is our understanding that the highlighted components areNON-PRESSURE retaining componenfs, as per the client's letter.

As indicated on AB-41 Statutory Declaration form and submitted documentation, the code of construction isother e n g ineering an al y si s.

- This registration is valid only for fittings fabricated at the location(s) covered by the QC certificate attached tothe accepted AB-41 Statutory Declaration form.- This registration is valid only until the indicated expiry date and only if the Manufacturer m.aintains a validquality management sysfem approvad by an acceptable thhd-party agency until that date.- Should.the approval of the quality management system lapse before lhe expiry date indicated above, thisregistration shall become void.

An invoice covering survey and registration fees will be fonararded from our Revenue Accounts.

lf you have any question don't hesitate to contact me by phone at (7S0) 433-0281 ext 3382 or fax (780)437 -77 87 or e-mail [email protected].

Sincerely,

STOJANOVIC, STEVAN, P. EngDOP Cert, No. D00008849

2018.04567 Page 1 of1

ool o 01 I Lo4\

Municipal Affairs

located at

Franz-Josef Vooel

(name of applicanl)

of Wika Alexander Wiegand SE & Co. KG

(position title) (must be in a position of authority)

(name of manufaclurer)

6391 1 Ge

do solemnly declare that the fittings listed hereunder, which are subject to the Safety Codes Act(check one)

tr comply with the requirements of which specifies the dimensions,

materials of construction, pressure/temperature ratings and identification marking of the fittings, or

X are not covered by the provisions of a recognized North American standard and are lherefore manufactured

to comply with ASME 840.100/840.200 as supported by the attached

(title of code of conslruclion or other applicable document)

data which identifies the.dimensions, materials of construction, pressure/temperature ratings and the basis

for such ratings, and the harking of the fittings for identification.

I further declare that the manufacture of these fittings is controlled by a quality control program which has been

verified by the following authority, ISO 9001 as being suitable for the manufacture of these

fiftings to the stated standard. The fittings covered by this declaration, for which I seek registration, are

STATUTORY DECLARATIONRegistration of Fittings

Executive Vice President Processlnsirumentation

A8.41 2016-01

ln this space, show facsimile ofmanufacture/s logo ortrademark as it will appear onthe fitting.

lWtffitl

(brief descriplion of

ln support of this application, lhe following information, calculations and/or test data are attached:

As per attached documenls

DECLARED before me at Klingenberg

this 14th(city)

day of June 2018

Jens HaBe'lbeck,

(Year)

nberg a. Mai n

(sign)

For ABSA Office Use Onlyis'{j-iii}.1'rir::\rl?;a+1t;;.1,;.1'l:iJ!',r l;!;.:.}lift .iirr'

NOTES:

To the best of my knowledge and belief, the application meets the requirements ofin Category

tpatev codes Act ^ff"f

Expiry Date: Y N, IOLO

in the State of of Bavaria, Germany(province or slate)

rt,

Standard 851,

Registration N

Date Registered: .lut 3 0 t0|$

Clause 4.2, and is accepted for registration

,'0",, ,0F02026'2 01K<

Tho intormation you provide is necessary only for the administration ot lhe programs as required byPressure Equipmsnl Discipline.

[email protected]"

REGISTRATION OF A PRESSURE FITTING DESIGN

2202 2nd AvenueRegina, SK S4R 1K3 Canada

1 (866) 530‐[email protected]

21‐Nov‐18

Attention:

Item:

OF02026.23

TSASK Codes and Standards Compliance has registered the design listed above in accordance with The Boiler and Pressure Vessel Act and Regulations and CSA B51. The Canadian Registration Number (CRN) is:

Please note that every fitting shall be constructed in strict accordance with the registered design.

Yours truly,

Remarks:

1) Addition to registered design.

2) CRN registered under reciprocal agreement and conditional upon compliance with the notes on the ABSA registration dated July 30, 2018.

File Number: 10967

Athan Syrgiannis, P.Eng.

Codes and Standards Compliance

Pressure Gauge Components

WIKA Document #17AR‐02747 Rev. 3Catalog or Drawing:

Fitting registrations are required to be resubmitted for validation after ten (10) years from the registration date in accordance with CSA B51, Clause 4.2.1.

July 8, 2020

[ 0 F]

Manufacturer: WIKA Alexander Wiegand SE & Co. KGRe:

Expiry Date:

Should you require anything further, please do not hesitate to contact the Codes and Standards Compliance Office at your convenience.

Manuel Medina

3103 Parsons RoadEdmonton, ABT6N 1C8

Wika Instruments Ltd.

Kommanditgesellschaft: Sitz Klingenberg – Amtsgericht Aschaffenburg HRA 1819 Komplementärin: WIKA Verwaltungs SE & Co. KG – Sitz Klingenberg – Amtsgericht Aschaffenburg HRA 4685

Tel. +49 9372 132-0 Fax +49 9372 132-406 E-Mail [email protected] www.wika.de

WIKA Alexander Wiegand SE & Co. KG Alexander-Wiegand-Straße 30 63911 Klingenberg Germany

Komplementärin: WIKA International SE - Sitz Klingenberg - Amtsgericht Aschaffenburg HRB 10505 Vorstand: Alexander Wiegand Vorsitzender des Aufsichtsrats: Dr. Max Egli

Extract of Documentation CRN approval 0F02026.2 Author: WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Str. 30 63911 Klingenberg, Germany Harald Gollas Corporate Approvals Tel.: +49 (0) 9372 132 5363 Fax: +49 (0) 9372 132 406 Email: [email protected] http://www.wika.de

Internal reference: 17AR-02747

© 2011 WIKA Alexander Wiegand SE & Co. KG, all rights reserved. The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. This extract shall not be reproduced except in full, without the written approval of WIKA Alexander Wiegand SE & Co. KG.

Project Ref.-No: 17AR-02747

Title: Issue no. 3 of CRN approval 0F02026.2

Written by: Harald Gollas Pressure and temperature measurement

Page: 2 / 6 Date: 2018-02-14

� : CRN approval summary (2019)





General

1.1 Revision history of certification

Issue / revision

Date Changes / references

01 2011-03-11 Internal request 09AR-00072

Initial Release, models as stated in the CofC

02 2017-06-26 Internal request 14AR-01568

• Addition of new model designations, refer to the relevant tables • Update of drawings • Addition of manufacturing locations

1.2 Scope of project

Issue / revision no. 3 of CRN approval 0F02026.2

This supplement includes following actions: • Addition of new model designations, series CPGXXXX

1.3 General description

The purpose of this document is to list products and supporting documentation for the CRN approval of pressure and temperature instrumentation made and / or sold under the name of WIKA Alexander Wiegand SE & Co. KG (in Canada WIKA Instruments Canada Ltd). 1.4 Electronic pressure – data sheets are in separate binders

Table 1: Overview electronic pressure devices included in CRN approval New model designations marked in blue Refer to section for the drawings

Piezo Sensor

Thinfilm Senor

Thinfilm Sensor (UHP)

Clamped Thinfilm Sensor

Ceramic Sensor

A-1x A-1x NWU-1x IS-20-H AC-1 C-1x BP-1 WU-1x HP-x C-2 D-1x C-1x WU-2x UT-1x DG-1x D-1x-x D-1x WUC-1x IUT-1x MCTx-x D-2x-x D-1x-x WUD-2x IS-3 OC-1 E-1x D-2x-x WUE-1x PSD-1x F-1x DG-1x xCT-1 F-2x E-1x R-2 ECO-1 F-1x IPT-1x F-2x IL-1x ECO-1 IS-1x IPT-1x IS-1x-x IS-1x IS-2x IS-1x-x IS-2x-x IS-2x IUT-1x IS-2x-x IUT-1x-x IUT-1x LS-1x IUT-1x-x LH-1x M-1x




Page: 3 / 6 Date: 2018-02-14






N-1x MG-1 O-10 MH-x-xx P-1x MHS-1 P-3x N-1x PS-2x O-10 PSA-2x OT-x PSD-3x P-1x R-x R-x S-1x P-3x SA-1x PS-2x PS-3 SL-1 PSA-2x PSA-3x TIS-1x PSD-1x TIS-2x PSD-3x PSD-4-xxx UT-1x S-1x XCM-1 SH-1 891.xx TIS-1x S-20 TIS-2x IS-3 TTF-1 TI-1 UT-1x MPR-x XCM-1 TPR-x 891.xx PSA-31 S-20 LW-1 IS-3 LF-1 TI-1 PS-3 MTF-x PSD-4 MHC-1 PSD-4-ECO MHS E-2 MY-17 S-21 PS-3 IS-4 E-2 AUT-1 S-21 GD-20 IS-4 CPG500 GD-20 CPG1500 CPG500 CPT6000 CPG1500 CPT6200 CPT6000 CPT6300 CPT6200 CPT6400 CPT6300 CPT7000 CPT6400 CPH7000 CPH7000

x - Any letter or number All model designations maybe followed by numbers or letter, maybe separated by “-“.




Page: 4 / 6 Date: 2018-02-14






1.5 Mechanical and Mechatronic Pressure – data sheets are in separate binders

Table 2: Overview mechanical and mechatronic pressure devices included in CRN approval No changes compared with the last revision

Bourdon Tube Gauges Diaphragm Gauges / Capsule Gauges

Differential Pressure Gauges

111.1x 4xx.12 700.0x 111.2x 432.25 113.13 432.55 711.11 113.53 43x.x0, 45x.x0 712.25 DP 130.15 43x.x6, 45x.x6 712.25 DX 1x1.15 716.05 13x.11 53x.5x, 53x.3x 7xx.12 2x1.11 PG43SA-C 7xx.14 21x.20 PG43SA-S 732.2x 212.25 PG43SA-D 73x.x1 21x.34 APGT / PGT series 73x.18 21x.40 series 21x.5x 891.34.1998 2x4.11 DPGT series 222.3x series 230.15 232.25 DPG40 23x.3x DPS40 23x.5x DPGS40 26x.x0 DPGT40 26x.3x DPGS40TA 31x.11 312.20 332.11 DPGT43 33x.30 DPGS43 332.34 DPGT43HP 33x.50 DPGS43HP 332.54 34x.11 733.02 516.12, 516.11 7x2.15 516.41 PG23LT PG23CP PGT series PGS series

series series

All gauges model 6xx.xx, A2G-xx, 516.11, 516.40, 7x6.11: pressure <15psi, no CRN required

x - Any letter or number




Page: 5 / 6 Date: 2018-02-14






All model designations maybe followed by numbers or letter, maybe separated by “-“. 1.6 Diaphragm Seals – data sheets are in separate binders

Table 3: Overview diaphragm seals included in CRN approval No changes compared with the last revision

Diaphragm Seals

990.xx 981.xx 983.xx

970.xx Hydra Series M93x.xx (seal mounted to gauge from above list) Levelguard (seal mounted to level transmitter from above list) FWG FWP

FWA FEW TWA PWJ

x - Any letter or number All model designations maybe followed by numbers or letter, maybe separated by “-“. The above models are covered under this CRN registration if mounted to a CRN approved measuring instrument. 1.7 Thermometers – data sheets are in separate binders

Table 4: Overview mechanical temperature devices included in CRN approval No changes compared with the last revision

Installation with Thermowell Installation also without Thermowell

IFC Model 73 MFT Model 74 TF5x Model 75 SC15xx Model 76 SB15 TGS55 SW15 TGS73 TI 20 / 3x / 5x TGS53 TI.V 2x / 3x / 4x TGS54 TI.R 45 / 60 TG5x

TI 8x TI.xx.3A

TT 3x / 5x TG7x

MODEL 3x Model 4x Model 5x Model 7x TGS53




Page: 6 / 6 Date: 2018-02-14






TGS54

x - Any letter or number All model designations maybe followed by numbers or letter, maybe separated by “-“. The above models are covered under this CRN registration if mounted to a CRN approved thermowell. The models listed as ‘installation also without thermowell’ are covered under this CRN registration if the application allows for an installation without thermowell. 1.8 Accessories – data sheets are in separate binders

Table 5: Overview accessories included in CRN approval No changes compared with the last revision

Accessories

910.11, 910.12 910.13 910.15 910.25, 910.32, 910.80, 910.81

All model designations maybe followed by numbers or letter, maybe separated by “-“. 1.9 Additional models with pressurized wetted parts – data sheets are in separate binders

Table 6: Overview additional models included in CRN approval

Additional models

TSD-30 Temperature transmitter Made by WIKA LSD-30 Level transmitter Made by WIKA LSD-4 Level transmitter Made by other manufacturer FSD-3 Flow transmitter Wetted parts made by other manufacturer LH-20 Pressure transmitter Made by other manufacturer DP-10 Pressure transmitter Made by other manufacturer

All model designations maybe followed by numbers or letter, maybe separated by “-“.

wika instruments ltd.apps.wika.com/approval_download/17ar-02747-20190208-crn_rev-0f02026_2c... ·...

Documents