wide dispersion ceiling sp spec
TRANSCRIPT
-
8/19/2019 Wide Dispersion Ceiling SP Spec
1/12
FEATURES
WIDE-DISPERSIONFLUSH-MOUNT CEILING SPEAKER
●
●
●
●
●
Designed to blend into ceilings with a smooth, low-profile
design.
Extra ease of use and higher cost-effectiveness with the
metal "back can" enclosure for the speaker rear.
(F-122C, F-2352C, F-2852C, F-2322C models)
Minimal high frequency rolloff allows clear and well-
balanced sound reproduction over a wide listening area.
Quick and easy installation to precisely mount speaker
onto ceilings and walls. Rotating front grille also installs
quickly and conveniently.
The Electronic Controller (AC-120) option is required to
provide increased control of the F-122C's speaker
response.
DESCRIPTION
TOA introduces a new range of ceiling-mounted speakers
that have been designed and engineered to overcome
limiting factors that have been associated with conventional
ceiling-mount speakers. Most noticeable has always been
the high-frequency rolloff that resulted from limited speaker
dispersion characteristics. TOA's new ceiling speaker range
provides well-balanced audio reproduction without treble
attenuation over an expanded listening area thanks to the
extra-wide dispersion characteristics that are part of the
overall speaker design. Perceived speaker directionality and
beaming tendencies are minimized, resulting in a natural,
well-balanced sound over a wide area at all levels.
Conventional speakers exhibit high frequency rolloff
characteristics as the distance between speaker and listenerincreases. However TOA believes that an ideal ceiling-
mounted speaker's response characteristics should include
wide dispersion and non-frequency dependent directionality
and this new ceiling speaker series proves that.
F-2852CF-2322CF-2352CF-122C
F-2352SCF-1522SC
-
8/19/2019 Wide Dispersion Ceiling SP Spec
2/12
WIDE-DISPERSIONFLUSH-MOUNTCEILING SPEAKER
A B
SP 1 SP 2
Frequency
S P L
B
B
Frequency
S P L
SP 2
Frequency
S P L
SP 2
Frequency
S P L
Conventional Speaker
Wide-Dispersion Speaker
SP 1
Frequency
S P L
A
SP 1
Frequency
S P L
A
SP 1
Frequency
S P L
B
SP 1
Frequency
S P L
BBA
SP 1 SP 2
A B A B
Wide-Dispersion
Speaker
ConventionalSpeaker
Expanded listening area coverage thanks to the extra-wide dispersion
characteristics of TOA's ceiling speakers makes it possible to
utilize fewer speakers to cover a desired area, allowing
more cost-effective installations.
Delivering a new level of audio performance inceiling-mounted speakers.
-
8/19/2019 Wide Dispersion Ceiling SP Spec
3/12
F-2852C (16cm cone)HIGH POWER (60W) 2-WAY WIDE RANGE
Polar Response
Designed for higher power (60W)
applications in locations having higher
ceilings that are in the range of 3 to 6
meters.•Equipped with back can meeting heat-resistant
specifications.•Equipped with a diffuser for wide dispersion of
high frequencies.
Directivity Factor vs. Frequency
Beamwidth vs. Frequency
Impedance vs. Frequency
SPL vs. Frequency
S P L
30
40
50
60
70
80
90
100
[dB]110
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
I m p e d a n c e
1
5
10
50
100
[ohm]200
B e a m w i d t h
10
50
100
200
[deg]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
D i r e c t i v i t y F a c t o r
20
10
5
1
[Q]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
250Hz200Hz160Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10500Hz400Hz315Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
1000Hz800Hz630Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
102000Hz1600Hz1250Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
4000Hz3150Hz2500Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
108000Hz6300Hz5000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
16000Hz12500Hz10000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
-
8/19/2019 Wide Dispersion Ceiling SP Spec
4/12
F-2322C (12cm cone)30W SERIES FULL RANGE
Polar Response
A cost-effective full-range speaker that is ideal
for most ceiling sound requirements.
(recommended 2 to 4m)
•Equipped with back can meeting heat-resistantspecifications.
•Flat front panel mounts flush.
Directivity Factor vs. Frequency
D i r e c t i v i t y F a c
t o r
20
10
5
1
[Q]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
Beamwidth vs. Frequency
B e a m w i d t h
10
50
100
200
[deg]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
Impedance vs. Frequency
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
I m p e d a n c e
1
5
10
50
100
[ohm]200
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
S P L
30
40
50
60
70
80
90
100
[dB]110
SPL vs. Frequency
250Hz200Hz160Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10500Hz400Hz315Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
1000Hz800Hz630Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
102000Hz1600Hz1250Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
4000Hz3150Hz2500Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
16000Hz12500Hz10000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
8000Hz6300Hz5000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
-
8/19/2019 Wide Dispersion Ceiling SP Spec
5/12
F-2352C (12cm cone)30W SERIES 2-WAY WIDE RANGE
Polar Response
Standard 2-way ceiling speaker for
applications requiring a full range frequency
response.
(recommended 2 to 4m)•Equipped with back can meeting heat-resistantspecifications.
•Equipped with a diffuser for wide dispersion of highfrequencies.
Directivity Factor vs. Frequency
Beamwidth vs. Frequency
Impedance vs. Frequency
SPL vs. Frequency
D i r e c t i v i t y F a c
t o r
20
10
5
1
[Q]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
B e a m w i d t h
10
50
100
200
[deg]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
I m p e d a n c e
1
5
10
50
100
[ohm]200
S P L
30
40
50
60
70
80
90
100
[dB]110
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
16000Hz12500Hz10000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
4000Hz3150Hz2500Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
108000Hz6300Hz5000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
1000Hz800Hz630Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
102000Hz1600Hz1250Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
250Hz200Hz160Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10500Hz400Hz315Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
-
8/19/2019 Wide Dispersion Ceiling SP Spec
6/12
F-122C (12cm cone)EQUALIZING CONTROLLED TYPE
30W SERIES FULL RANGE
Polar Response
Optimized for use with the optional AC-120
Electronic Controller to deliver the highest quality
audio in ceiling-mounted speakers as well as to
tailor speaker response to suit specific installation
requirements. (recommended 2 to 4m)
•Equipped with back can meeting heat-resistant specifications.
•Equipped with a diffuser for wide dispersion of high frequencies.
Directivity Factor vs. Frequency
Beamwidth vs. Frequency
Impedance vs. Frequency
SPL vs. Frequency
AC-120
D i r e c t i v i t y F a c
t o r
20
10
5
1
[Q]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
B e a m w i d t h
10
50
100
200
[deg]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
I m p e d a n c e
1
5
10
50
100
[ohm]200
S P L
30
40
50
60
70
80
90
100
[dB]110
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
Without EQWith EQ
16000Hz12500Hz10000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
4000Hz3150Hz2500Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
108000Hz6300Hz5000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
1000Hz800Hz630Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
102000Hz1600Hz1250Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
250Hz200Hz160Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10500Hz400Hz315Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
-
8/19/2019 Wide Dispersion Ceiling SP Spec
7/12
F-2352SC (12cm cone)6W SERIES 2-WAY WIDE RANGE
Polar Response
Perfect for low power use, this speaker has
increased cost-effectiveness and includes a
metal "back can" for greater installation ease.
(recommended 2 to 4m)•Because there is no back can, it can be mounted inceilings even having minimal depth.
•Equipped with a diffuser for wide dispersion of highfrequencies.
Directivity Factor vs. Frequency
Beamwidth vs. Frequency
Impedance vs. Frequency
SPL vs. Frequency
D i r e c t i v i t y F a c
t o r
20
10
5
1
[Q]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
B e a m w i d t h
10
50
100
200
[deg]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
I m p e d a n c e
1
5
10
50
100
[ohm]200
S P L
30
40
50
60
70
80
90
100
[dB]110
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
16000Hz12500Hz10000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
4000Hz3150Hz2500Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
108000Hz6300Hz5000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
1000Hz800Hz630Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
102000Hz1600Hz1250Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
250Hz200Hz160Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10500Hz400Hz315Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
-
8/19/2019 Wide Dispersion Ceiling SP Spec
8/12
F-1522SC (10cm cone)6W SERIES FULL RANGE
Polar Response
Special compact model designed for low
output applications.
(recommended 2 to 4m)
•Because there is no back can, it can be mounted inceilings even having minimal depth.
•Flat front panel mounts flush.
16000Hz12500Hz10000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
4000Hz3150Hz2500Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
108000Hz6300Hz5000Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
1000Hz800Hz630Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
102000Hz1600Hz1250Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
250Hz200Hz160Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10500Hz400Hz315Hz
0°
90°90°
60° 60°
30° 30°
-40
-30
-20
-10
0
10
Directivity Factor vs. Frequency
Beamwidth vs. Frequency
Impedance vs. Frequency
SPL vs. Frequency
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
S P L
30
40
50
60
70
80
90
100
[dB]110
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
B e a m w i d t h
10
50
100
200
[deg]
D i r e c t i v i t y F a c
t o r
20
10
5
1
[Q]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
Frequency
20 50 100 500 1k 5k 10k 20k[Hz]
I m p e d a n c e
1
5
10
50
100
[ohm]200
-
8/19/2019 Wide Dispersion Ceiling SP Spec
9/12
APPEARANCE AND DIMENSIONAL DIAGRAMS
Unit: mm
F-2852C
F-2322C
F-2352C
Side View Rear ViewFront View
Side View Rear ViewFront View
Side View Rear ViewFront View
ø250 (Mounting hole)
Safety wire60 cm in length (accessory)
Ceiling
Ceiling reinforcementring (accessory)
M a x .
2 0 0
M a x .
3 7
Ceiling reinforcement ring (accessory) Ceiling mounting
ø 2 8 0
3 0
ø 2 4 5
38
ø310.4 65
4510
1.5
ø250
227
12200
ø260.4 65
10
1.5
45
ø 200
Safety wire60 cm in length (accessory)
ø 2 3 0
3 0
ø 1 9 5
ø200 (Mounting hole)
Ceiling
Ceiling reinforcementring (accessory)
M a x .
2 0 0
M a x .
3 7
Ceiling reinforcement ring (accessory) Ceiling mounting
41229
ø260.4
ø200 (Mounting hole)
Ceiling
ø 200
65
4510
1.5
Safety wire60 cm in length (accessory)
Ceiling reinforcementring (accessory)
ø 2 3 0
3 0
M a x .
2 0 0
M a x .
3 7
ø 1 9 5
Ceiling reinforcement ring (accessory) Ceiling mounting
-
8/19/2019 Wide Dispersion Ceiling SP Spec
10/12
APPEARANCE AND DIMENSIONAL DIAGRAMS
Unit: mm
F-122C
F-2352SC
F-1522SC
41229
ø260.4
ø200 (Mounting hole)
Ceiling
ø 200
65
4510
1.5
Safety wire60 cm in length (accessory)
Ceiling reinforcementring (accessory)
ø 2 3 0
3 0
M a x .
2 0 0
M a x .
3 7
ø 1 9 5
Ceiling reinforcement ring (accessory) Ceiling mounting
41154
ø200 (Mounting hole)
ø 2 3 0
Ceiling mounting
Ceiling M a x .
3 7
M a x .
1 1 3
11117
ø135 (Mounting hole)
Ceiling
ø 1 5 5
M a x . 3 7
M a x .
1 0 6
Ceiling mounting
Side View Rear ViewFront View
Side View
Rear ViewFront View
Side View
Rear ViewFront View
-
8/19/2019 Wide Dispersion Ceiling SP Spec
11/12
HY-BC1 Back Can
HY-TR1 Trim Ring
HY-TB1 Tile Bar Bridge
HY-AH1 Anchor Hanging Bracket
AC-120 Electronic Controller
OPTIONS
Unit: mm
The HY-BC1 Back Can is a metal case attached to flush-mountceiling speaker when mounted in exposed applications. The BackCan is hung from a ceiling suspension pipe.
The HY-TR1 Trim Ring allows installation of flush-mounted ceilingspeakers in pre-existing ceiling panel holes which are over 200mmin diameter. The use of 2 Trim Rings allows the speaker to bemounted in holes from 240mm to 300mm in diameter.
The HY-TB1 is channel bar to be used when supporting flush-mounted ceiling speakers by way of ceiling bars to prevent their fullweight from being directly applied to the ceiling panel duringinstallation. This channel bar is used in conjunction withreinforcement hardware supplied with the speaker. One complete setconsists of 2 HY-TB1 bars.
The HY-AH1 Anchor Hanging Bracket is designed to support ceiling-suspended speakers from an anchor bolt in order to prevent thespeaker's full weight from being directly applied to the ceiling panel.It is used in conjunction with reinforcement hardware supplied withthe speaker.
The AC-120 is a controller for F-122C, F-121C/121CM or F500,600 series.
Finish Surface-treated steel plate, t0.8, black, paint
Weight 1,5kg
Accessory Rubber grommet x 2
Specifications
Ceiling Hole Diameter ø200 – ø300mm
Finish Surface-treated steel plate, white, paint
Weight 500g
Specifications
Finish Steel plate, plating
Weight 500g (for set of 2 bars)
Accessory Mounting screw x 4
Specifications
Finish Steel plate, plating
Weight 700g
Accessory Paper pattern x 1
Specifications
Specifications
AC Line Voltage AC mains, 50/60Hz
Power Consumption 9W 120V version9W 220 – 240V version
Total Harmonic Distortion Less than 0.05% (1kHz, +4dB*)
Hum and Nose Less than –94dB* (20Hz – 20kHz B.P.F)
Input +4dB* 10k ohns balanced phone jackMax input level: + 20dB*
Output CH out +4 dB* 600 ohms balanced phone jack Max output level: +20dB*
Low out +4dB* 600 ohms balanced phone hack Max output level: +20dB* Filter: 12dB per octave Cut off frequency: 10z
Low Cut Center frequency 100Hz, 6dB cut (for F-122C and F-121C)
Finish Black
Dimensions 482.6 (W) x 44 (H) x 297.5 (D)mm
Weight 3.7kg
* 0dB = 0.775Vrms
ø320
ø200 1.2
ø 2 4 0 ø
2 0 0
220
2 – ø20 knockout hole
ø22 or ø28knockout hole
6 2
1 0
1 5 5
1 5 6 . 5
1 0
50
263.8 – 313.8
260.8 – 310.8 1.5 16 30
466
4–7 × 10.5
3 1 . 8
4 4
482.6
280 11.5297.5
20–ø3.4
2–ø3.4
2–4.5 × 34.5
1
21
2 0
3 0
2 3 3
0
1 . 2
570 (30 × 19)
603
30
90
16.5
Magnified view of preinstalled tie-plate
-
8/19/2019 Wide Dispersion Ceiling SP Spec
12/12
Specifications are subject to change without notice.
TOA CorporationURL : http://www.toa.jp/
Bass reflex type
330Ω(30W), 1kΩ (10W), 3.3kΩ(3W), 10kΩ (1W)
170Ω(30W), 330Ω(15W),1kΩ(5W), 3.3kΩ(1.5W),10kΩ (0.5W)
170Ω (3.7W), 330Ω(1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W)
30W (high impedance)
60W (high impedance)
6W(high impedance)
Enclosure
Rated Input
Power HandlingCapacity
Impedance100V line:
70V line:
25V line:
Low (adjustable)
Sound Pressure Level
Frequency Response
Speaker ComponentHigh frequency:
Low frequency:
Mounting Hole
Input Terminal
Usable Cable
FinishEnclosure:
Baffle:
Rim:
Punched net:
Dust-proof bag:
Dimensions
Weight
AccessoriesPanel:
Ceiling reinforcementring:
Safety wire:
Paper pattern:
OptionAnchor hangingbracket:
Back can:
Tile bar bridge:Trim r ing:
Electronic controller:
Continuous pink noise:90W (8Ω), 60W (16Ω)Continuous program:180W (8Ω), 120W(16Ω)
Continuous pink noise: 60W (8Ω), 30W (16Ω)Continuous program:120W (8Ω), 60W (16Ω)
AC-120C
HY-TB1
HY-BC1
HY-AH1
HY-TR1
5.1kg (including
mounting accessories)
3.7kg (including
mounting accessories)
3.7kg (including
mounting accessories)
3.7kg (including
mounting accessories)1.5kg (including panel) 1kg (including panel)
ø280 x 227 (D)mm
— Artificial fiber, black
Steel plate, white, paint
Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Steel plate, plating —
—
Solid copper wire: ø0.5 – ø1.6mm (equivalent to AWG No. 24 – 14)Stranded copper wire: 0.2 – 2.5mm2 (equivalent to AWG No. 24 – 14)
Removable locking connector with screw-down terminals(2 input terminals and 2 bridge terminals)
Push-in connector(Bridging terminal-2 branch type)
ø250mm (maximumceiling thickness:
37mm)
Dome-type
16cm cone-type 12cm cone-type 12cm cone-type 10cm cone-type
Balanced dome-type
12cm cone-type
Balanced dome-type
12cm cone-type
1.7kΩ(6W), 3.3kΩ(3W)
830Ω(6W), 1.7kΩ (3W)
3.3kΩ(1.5W)
1.7kΩ(6W), 3.3kΩ(3W)10kΩ(1W), 20kΩ(0.5W)
830Ω (6W), 1.7kΩ(3W)3.3kΩ(1.5W),10kΩ(0.5W)
20kΩ(0.25W)
170Ω (60W), 330Ω(30W)670Ω(15W), 3.3kΩ(3W)
83Ω (60W), 170Ω(30W)330Ω(15W), 670Ω (7.5W)
3.3kΩ (1.5W)
83Ω (7.5W),170Ω(3.7W)330Ω (1.9W), 670Ω (0.9W)
3.3kΩ (0.2W)
Model No.
91dB(1W, 1m) 90dB (1W, 1m)90dB (1W, 1m)
70 – 20,000Hz (–10dB),
50 – 20,000Hz (–20dB) at installation in 1/2 free sound field
(measured by installing the unit in the center of a ceiling.)
80 – 20,000Hz (–10dB),50 – 20,000Hz (–20dB)at installation in 1/2 freesound field (measuredby installing the unit inthe center of a ceiling.)
ø135mm (maximumceiling thickness:
37mm)ø200 (maximum ceiling thickness: 37mm)
1
1
1
1
—
—
—
—
——
—
—
—
—
Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
16Ω, 8Ω
Continuous pink noise: 9W (8Ω), 6W (16Ω)Continuous program: 18W (8Ω), 12W (16Ω)
91dB (1W, 1m) 89dB (1W, 1m) 88dB (1W, 1m)
60 – 20,000Hz (–10dB),45 – 20,000Hz (–20dB)at installation in 1/2 freesound field (measuredby installing the unit inthe center of a ceiling.)
65 – 18,000Hz (–10dB),45 – 20,000Hz (–20dB)at installation in 1/2 freesound field (measuredby installing the unit inthe center of a ceiling.)
Note: The F-122C must be used with an Electronic Controller AC-120.
F-2852C F-2322C F-2352C F-122C F-2352SC F-1522SC
ø230 x 154 (D)mmø230 x 229 (D)mmø230 x 229 (D)mmø230 x 200 (D)mm
600V Vinyl-insulated cable (IV wire or HIV wire)Solid copper wire; ø0.8 – ø1.6mm (equivalent to AWG No.20 – 15)
7-core twisted copper wire:0.75 – 1.25mm2 (equivalent to AWG No.18 – 17)
830Ω (0.75W)
1.7kΩ(0.4W)
3.3kΩ(0.2W)
830Ω (0.75W), 1.7kΩ(0.4W)
3.3kΩ(0.2W),10kΩ(0.06W)
20kΩ(0.03W)
SPECIFICATIONS
ø155 x 117 (D)mm