why should building product manufacturers support bim?
DESCRIPTION
Building Information Modelling is a hot topic, with government and the construction industry shouting its benefits. The problem for the manufacturer, with hard pressed budgets, is will I get a return on my investment?TRANSCRIPT
Why should Building Product Manufacturers Support BIM?A research report into the Adoption of BIM by Architects
www.cadvantage.co.uk
How do I select the right software?
How do I make sure the right level of detail is provided? How do I support it properly?
How do I justify the cost to the Finance Director?
Adoption of BIM: 2013Building Information Modelling is a hot topic, with government and the construction industry shouting its benefits. The problem for the manufacturer, with hard pressed budgets, is will I get a return on my investment?
Adoption of BIM: 2013 has been researched and written to help you answer that question and then make the right implementation choices.
This presentation provides a snap shot of the report findings.
Find out more or purchase the report online now!
www.cadvantage.co.uk
Adoption of BIM: 2013
BIM – Rate of Implementation
• A significant proportion of architects already use BIM for all projects and this is predicted to more than treble by 2016.
• By 2016 the value of work BIM is used for will be 14 times greater.
Find out more or purchase the report online now!
www.cadvantage.co.uk
How does BIM affect Product Selection?
www.cadvantage.co.uk
• Today over half of architects designing with BIM will give preference to a product supported by a BIM object.
• Three quarters of architects using BIM think the availability of BIM objects is important when designing, and nearly half of architects interviewed require BIM objects for all of their projects.
• Nearly half of architects interviewed expect contractors to be more likely to stay with specifications as a result of BIM.
Find out more or purchase the report online now!
Preference of buying a product supported by BIM over alternatives
The Provision of BIM Objects
• Propriety software is not required by all architects
• Half of architects interviewed indicated they would require different levels of detail from manufacturers as they progress through the stages of design.
• Manufacturer websites are the preferred location to source BIM objects.
Find out more or purchase the report online now!
www.cadvantage.co.uk
Further information
Full details on the adoption of BIM can be found in our report.
Find out more or purchase the report online now!
Our 2013 research into BIM will help manufacturers decide if the investment in Building Information Modelling is justified by enabling you to understand:
• The value and penetration of BIM designed construction up to 2016 • How architects are currently using BIM and how this will change by 2016• Variations in BIM usage between sectors• The availability and importance of manufacturers specifications as BIM
objects• Architects preferred sources for BIM objects• What architects expect from manufacturers offering BIM objects
Research for BIM was conducted during July 2013. Responses were gathered online and via telephone, from over 100 architects who use BIM and are working in a range of practice sizes.
The cost of the report is: £250+VATPurchase online now!
www.cadvantage.co.uk
Chris Ashworth
Mobile: 07747 626095
Fax: 01252 836850
Competitive Advantage Consultancy Limited Growth through customer focus
@CompetitiveA
cadvantagemarketing
companies/competitive-advantage
www.cadvantage.co.uk
www.cadvantage-blog.co.uk