white lion - weha usa white lion blade.pdf · weha white lion diamond bridge saw blade is excellent...

1
Weha White Lion Diamond Bridge Saw Blade is excellent for Quartzite, Granite, and Engineered Stone Weha has built this Quartzite Bridge saw blade specifically to cut Quartzite stone. But it also does awesome on Granite and Engineered stone. 1) What bond will be used for the material you will be cutting? The White Lion Bridge Saw blade bond was made specifically for quartzite stone. 2) What type of Matrix will be used? We used the ARIX Layered diamond Technology for continuous diamond contact to the stone and maximum diamond concentration for extra life. 3) Do you want life or speed? Well, we wanted both! By using the ARIX matrix diamond technology with the segment design to remove slurry and “bite” the stone, we have achieved a fast cut of 10-15 ft per minute with exceptional life. 4) How tall of a segment will be used for the material being cut? We chose a 20mm segment height based upon the bond of the segment. This 20mm height will achieve the same life of a 25mm Bridge Saw blade but without the risks that come with a 25mm blade(segments breaking, misjudging the blade and jamming into the stone, the last 5mm of the segment not cutting). The Weha White Lion will cut to the core! 5) What type of core will be used for the job at hand? We have chosen to stay with the most widely used and respected core in the world, the German made Silent Core. This core will run quite, smooth, and will not fatigue or deflect during cuts. Visit www.wehausa.com for more product and technical info. 14” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 128903 16” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 128904 18” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 128906 20” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 128908 24” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 128909 WEHA BEST SELLER! WHITE LION Washinton WA Oregon OR California CA Nevada NV Idaho ID Montana Wyoming WY Utah UT Colorado CO Kansas KS Oklahoma OK Missouri MO Arkansas AR Louisiana LA Mississippi MS Alabama AL Georgia GA Florida FL Tennessee TN Kentucky KY Virginia VA MD DE West Virginia WV North Carolina NC South Carolina SC Texas TX New Mexico Arizona AZ Nebraska NE Iowa IA South Dakota SD North Dakota ND Minnesota MN Wisconsin WI Michigan MI Illinois IL Indiana IN Ohio OH Pennsylvania PA NJ New York NY Maine ME MA CT VT NH RI British Columbia Alberta Saskatchewan Manitoba Ontario Quebec New Brunswick Nova Scotia Please contact your Regional Territory Manager for more product information and distributor locations. Rich Cleveland • 714-980-1066 • [email protected] Steve Guyman • 269-350-6808 • [email protected] Jim Whalen • 610-806-2169 • [email protected] John Thomas • 678-358-8876 • [email protected]

Upload: truongthu

Post on 31-Jan-2018

221 views

Category:

Documents


1 download

TRANSCRIPT

Weha White Lion Diamond Bridge Saw Blade is excellent for Quartzite, Granite, and Engineered StoneWeha has built this Quartzite Bridge saw blade specifically to cut Quartzite stone. But it also does awesome on Granite and Engineered stone.1) What bond will be used for the material you will be cutting? The White Lion Bridge Saw blade bond was made specifically for quartzite stone.2) What type of Matrix will be used? We used the ARIX Layered diamond Technology for continuous diamond contact to the stone and maximum diamond concentration for extra life.3) Do you want life or speed? Well, we wanted both! By using the ARIX matrix diamond technology with the segment design to remove slurry and “bite” the stone, we have achieved a fast cut of 10-15 ft per minute with exceptional life.4) How tall of a segment will be used for the material being cut? We chose a 20mm segment height based upon the bond of the segment. This 20mm height will achieve the same life of a 25mm Bridge Saw blade but without the risks that come with a 25mm blade(segments breaking, misjudging the blade and jamming into the stone, the last 5mm of the segment not cutting). The Weha White Lion will cut to the core!5) What type of core will be used for the job at hand? We have chosen to stay with the most widely used and respected core in the world, the German made Silent Core. This core will run quite, smooth, and will not fatigue or deflect during cuts.

Visit www.wehausa.com for more product and technical info.

14” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 12890316” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 12890418” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 12890620” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 12890824” X 20MM WHITE LION DIAMOND BRIDGE SAW BLADE - 128909

WEHA BEST SELLER!WHITELION

WashintonWA

OregonOR

CaliforniaCA

NevadaNV

IdahoID

Montana

WyomingWY

UtahUT Colorado

COKansas

KS

OklahomaOK

MissouriMO

ArkansasAR

LouisianaLA

MississippiMS

AlabamaAL

GeorgiaGA

FloridaFL

Tennessee TN

KentuckyKY

VirginiaVA

MDDE

WestVirginia

WV

North CarolinaNC

SouthCarolina

SC

TexasTX

New Mexico

ArizonaAZ

NebraskaNE

IowaIA

South DakotaSD

North DakotaND Minnesota

MN

WisconsinWI

MichiganMI

IllinoisIL

IndianaIN

OhioOH

PennsylvaniaPA

NJ

New YorkNY

MaineME

MA

CT

VTNH

RI

British Columbia

Alberta

Saskatchewan

Manitoba

Ontario

Quebec NewBrunswick

Nova Scotia

Please contact your Regional Territory Manager for more product information and

distributor locations.

Rich Cleveland • 714-980-1066 • [email protected]

Steve Guyman • 269-350-6808 • [email protected]

Jim Whalen • 610-806-2169 • [email protected]

John Thomas • 678-358-8876 • [email protected]