what‘s new in 16.6 release - flow cad · 2012-11-22 · super hotfixes • 16.6 is the last...
TRANSCRIPT
![Page 1: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/1.jpg)
Simon Zubler
What‘s New in OrCAD Capture
Release 16.6
(C) FlowCAD Confidential
1
![Page 2: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/2.jpg)
Windows 8 Support
• Cadence will support the Windows 8
– 64bit Intel based version
• Cadence will NOT support
– Windows RT (ARM)
• It will be supported by a future SPB release. The SPB
version and the support date has not be finalized
• No support for Windows 8 with SPB 16.5 or before
(C) FlowCAD Confidential
2
![Page 3: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/3.jpg)
Super Hotfixes
• 16.6 is the last release on 16.x database
• 17.0 is the next and is scheduled for H1 2014
– Major upgrades in database
• Distribution of new features:
– ISRs are bugfixes available biweekly
– 1 Super Hotfix per quarter
• Collection of bugfixes
• New features
• Limited test and documentation
(C) FlowCAD Confidential
3
![Page 4: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/4.jpg)
New Features in Capture
• OrCAD Schematic Driven Pre-route Analysis
• Enhanced Productivity
– Save, Save As
– CIS RefDes
– Find & Replace
– Open as read Only
– Cache Update
• Netgroup Enhancements
• Hierarchical Block Shapes
(C) FlowCAD Confidential
4
![Page 5: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/5.jpg)
Capture Driven Pre-Route Analysis
In Capture schematic electrical constraints and topologies can be:
– Analyzed
– Assigned
– Edited
– Stored
This includes the support of xnets
Work Flow:
1. Capture: SI Model Association
2. Capture: Assign DC Nets
3. Capture: Topology Extraction (.TOP)
4. OrCAD SI: Analyze / Edit Topology
5. OrCAD SI: Update Capture with topology incl. constraints
6. Capture: Netlist to PCB Editor
7. PCB Editor: Topology and Constraints enter Constraint Manager
C1
net
xnet
(C) FlowCAD Confidential
5
![Page 6: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/6.jpg)
“1 User” Methodology
Capture Driven Pre-Route Analysis
Add Logic
Connectivity
(SI setup)
Add/Modify
Constraints
Allegro net list
Back
Annotate
OrCAD Capture
(Logical Domain)
SigXplorer
(SI Analysis)
Allegro PCB Des.
(Physical Domain)
*.TOP
Physical
Folder
*.TOP
Physical
Folder
Import
Topology
Export
Topology
Physical
Design
Update Physical
Explore Signal
Logical Designer does also Signal Integrity Analysis
Update
Capture
Explore
Signal
(C) FlowCAD Confidential
6
![Page 7: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/7.jpg)
“2 User” Methodology
Capture Driven Pre-Route Analysis
Add Logic
Connectivity
(SI setup)
Export
Topology
Add/Modify
Constraints
Send Top
file
Allegro Net list
Back Annotate
OrCAD Capture
(Logical Domain)
SigXplorer
(SI Analysis)
Allegro PCB Des.
(Physical Domain)
*.TOP
Physical
Folder
*.TOP
Physical
Folder
Import
Topology
Export Topology
Physical
Design
Update Physical
Explore Signal
Logic Designer & Signal Integrity Analyst are 2 persons
Receive
Top file
Import/
Associate
Topology
(C) FlowCAD Confidential
7
![Page 8: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/8.jpg)
Save
• Only Pages and Library components
modified by user are marked for save
• Design, Schematic and Pages that
require Save are marked (*)
• Better visibility, when unwanted
changes happened on pages
Enhanced Productivity
(C) FlowCAD Confidential
8
![Page 9: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/9.jpg)
SaveAs
• Project SaveAs enables user controlled save of associated files also along with the project at the new location while maintaining their references. Available Options
– Copy DSN to Project Folder
– Rename DSN to match Project
– Copy All Referred Files Present Within Project Folder
– Copy All Referred Files Present Out of Project Folder
• Save associated files include:
– referred projects, designs, libraries, simulation profiles, output files etc.
Enhanced Productivity
(C) FlowCAD Confidential
9
![Page 10: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/10.jpg)
Find & Replace
• Find Enhancements – Search for Property = specific Value
– Use Regular expressions for matching Values
– Examples
• PCB Footprint=dip2*
• Part Reference=(C|R)[2-9] finds all parts with
references starting with R or C followed by any
number between 2 and 9
• Global Find and Replace support
available for Offpage Connectors
Enhanced Productivity
(C) FlowCAD Confidential
10
![Page 11: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/11.jpg)
Cache Update
• Replace Multiple Cache Parts in one operation
• All options of Replace Cache now work on Update Cache
Enhanced Productivity
(C) FlowCAD Confidential
11
![Page 12: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/12.jpg)
Read only open
• There will be no upref executed on read only designs
• Upref will be executed, if you save
• Allows users to review a schematic without upref
– Opens fast
– Gives Warning when changes were performed
(C) FlowCAD Confidential
12
![Page 13: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/13.jpg)
NetGroup Enhancements
• NetGroup membership visible on schematic and
schematic print
• Assign NetGroups through Alias
(C) FlowCAD Confidential
13
![Page 14: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/14.jpg)
Shapes for Hierarchical Block
• Use Edit Part for
hierarchcal blocks
• Shapes can be stored
in the library
• Looks alike as block
diagram
(C) FlowCAD Confidential
14
![Page 15: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/15.jpg)
Auto Reference
• Provides Auto-Reference
assignment for Entire
Design
– Previous releases were
limited to Schematic level
only
• Schematic Level auto-
reference for PSpice
• Reference & Part
reference are always in
sync
(C) FlowCAD Confidential
15
![Page 16: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/16.jpg)
Preserve User Assigned Reference
• User Modification to Reference is
detected and marked by Capture
• Annotation Process has new options
to manage Reference Assignments
(C) FlowCAD Confidential
16
![Page 17: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/17.jpg)
Waive DRCs
• Waive Selected DRC
• DRC waived are hidden
from future DRC runs
• User can remove
waived DRCs
(C) FlowCAD Confidential
17
![Page 18: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/18.jpg)
CIS – Link Database Part
• Part manager allows Link
for External Design parts
• Link Part at Instance or
Occurrence? Systems
decides based on user
inputs and design data
(C) FlowCAD Confidential
18
![Page 19: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/19.jpg)
CIS Reference Designator
• No more manual corrections in CIS-BOM for Refdes
• Synchronized handling of Refdes in CIS BOM with Capture database. CIS now supports all Refdes formats like: – U2N
– C1_R
– C12-1
– C0001
– R7-TOP
– MP_2V5_REF
– TP3V3_0
• Consistent Refdes for multi-packages – MP_2V5_REF shows as MP_2V5_REF
– and not MP_2V5_REFA
Enhanced Productivity
(C) FlowCAD Confidential
19
![Page 20: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/20.jpg)
Capture / Capture CIS
What is possible with TCL
(C) FlowCAD Confidential
20
![Page 21: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/21.jpg)
Tcl Integration in OrCAD Capture
Web Browser
Component
MFC Widgets
(C) FlowCAD Confidential
21
![Page 22: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/22.jpg)
Encrypting Tcl Scripts
• To encrypt Tcl scripts in Capture, you should use the
orcad::encrypt command from the Capture
Command window.
• Syntax: orcad::encrypt <path to Tcl script> [output_file]
Example:
orcad::encrypt myFirstApp.tcl
Encrypted TCL Applications can be tied to licensing
optional
(C) FlowCAD Confidential
22
![Page 23: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/23.jpg)
With TCL…
• User can find out installation paths
• Work on ini files
• Customize Page
• Search and Modify Properties
• Create entire designs
(C) FlowCAD Confidential
23
![Page 24: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/24.jpg)
TCL Callbacks in Capture
• _cdnCapTclAddDesignCustomMenu :- For adding custom TCL menu
• _cdnCapTclAddPageCustomMenu :- For adding custom TCL menu
• _cdnOrAtCaptureExit :- On Capture exit
• _cdnOrOnDesignPostSave :- After design save
• _cdnOrOnDesignPreSave :- Before design save
• _cdnOrOnLibraryPostSave :- After library save
• _cdnOrOnLibraryPreSave :- Before library save
• _cdnOrOnNewSchematicPage :- On "New Page", after the page is created
• _cdnOrOnNewSchematicPagePreCreate :- On "New Page", before the page is created
• _cdnOrOnSchematicPageAttributeChange :- On page attribute (size etc.) change
• _cdnOrPostConnect :- after page connectivity evaluation
• _cdnOrPostReplaceInst :- On Replace cache/instance, after the instance is replace
• _cdnOrPreConnect :- On page evaluation, before the page is evaluated for any connectivity change
• _cdnOrPreReplaceInst :- On Replace cache/instance, before the instance is replaced
• _cdnOrPropEditOnDBChange :- On any Capture database change through property editor
• _cdnOrSchViewCmdComplete :- On any schematic command end
• _cdnOrSchViewCmdStart :- On any schematic command start
• _cdnOrPreCisExplorerCreate :- On CIS Launch
(C) FlowCAD Confidential
24
![Page 25: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/25.jpg)
Capturing Schematic Operations on Callback
capCustomSamples/
capPickPointOnSelectWire.tcl
(C) FlowCAD Confidential
25
![Page 26: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/26.jpg)
Design Compare
• In CIS License only
• XML Diff Generation
– DboTclHelper_DesignDiffAndDump
{d:/spbcd3/tools/capture/samples/abc.dsn}
{d:/spbhier/tools/capture/samples/abc.dsn} test.dmp
– Warning: Crashes if CIS license is not used
• GUI
– svsDiffDesigns {d:/spbcd3/tools/capture/samples/abc.dsn}
{d:/spbhier/tools/capture/samples/abc.dsn}
(C) FlowCAD Confidential
26
![Page 27: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/27.jpg)
Export/Import XML
• Define Environment Variable to generate TCL
– CAPTURE_WRITE_TCL_ONXMLIMPORT=1
• XML Import/Export Commands
– XMATIC_DSN2XML – Design to XML
– XMATIC_XML2DSN - XML to Design – Generates TCL
– XMATIC_OLB2XML – Library to XML
– XMATIC_XML2OLB – XML to Library – Generates TCL
• Schema (xsd) available in
<install>\tools\capture\tclscripts\capdb
– dsn.xsd
– olb.xsd
(C) FlowCAD Confidential
27
![Page 28: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/28.jpg)
Enhanced Configurability…
• Add your own TCL Customized
DRC Applications
• Sample DRC provided
– Hanging Wires
– Device Pin Mismatch
– Overlapping Wires
– Reference Prefix mismatch
– Port-Pin Mismatch
– Shorted Discrete Part
(C) FlowCAD Confidential
28
![Page 29: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/29.jpg)
Customize your Tooltips
• TCL callback allows user to customize tooltips for
different object types
• Hybrid Application Framework allows Graphical
Tooltips!!
(C) FlowCAD Confidential
29
![Page 30: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/30.jpg)
OrCAD Design Database Upgraded
• Database Transaction Support
– Enables consistency over the
network operations
– Prevents corruption of library and
design data
• Database Compaction
– Deletion of objects reduce file size
immediately
• TCL Enabled - Support for file
storage within Capture DSN file (C) FlowCAD Confidential
30
![Page 31: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/31.jpg)
Configuring CIS…
• CIS supports columns larger than 255 characters
• Customize Part Placement Checks
– For example - Configure to disable placement of an EOL part
– For example - Configure to warn a user if part procurement has
long lead time
• Highlight CIS rows for designers
– For example – BLUE recommended part, RED not
recommended
(C) FlowCAD Confidential
31
![Page 32: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/32.jpg)
Handling Menu
• Menu files located in
– <hier>\share\orResources
– Includes icons for toolbars
• Menu can be added
statically through XML or
dynamically through TCL
OrCAD_Capture.xml
(C) FlowCAD Confidential
32
![Page 33: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/33.jpg)
Handling Menu Tags
• menuItem
• Type – pop/action
• label
• enabled
• statusMsg
• id
• hide
• separator
• update
OrCAD_Capture.xml
For callback methods
<hier>\tools\capture\tclscripts\capAutoLoad\capTCLMenu.tcl (C) FlowCAD Confidential
33
![Page 34: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/34.jpg)
Menu Contexts
• PROJECT_MANAGER_VIEW
• PART_VIEW
• SCHEMATIC_VIEW
• PROPERTY_EDITOR_VIEW
• HTML_VIEW
• LOG_VIEW
• SYMBOL_VIEW
• VHDL_VIEW
• TEXT_VIEW
• VERILOG_VIEW
OrCAD_Capture.xml
(C) FlowCAD Confidential
34
![Page 35: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/35.jpg)
RMB Menu
• RegisterAction "MyPMMenu" "return 1" "Ctrl+r"
"menuProc dataToMenuProc" PM
• RegisterAction “MySchematicMenu" "return 1"
"Ctrl+r" "menuProc dataToMenuProc" Schematic
(C) FlowCAD Confidential
35
![Page 36: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/36.jpg)
Adding a Customized Toolbar
(C) FlowCAD Confidential
36
![Page 37: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/37.jpg)
Place Part Interactively
• Select Schematic View
• Enter the command on TCL window
– PlaceNew {d:\spbcd3\TOOLS\CAPTURE\LIBRARY\GATE.OLB} 100301/FP
(C) FlowCAD Confidential
37
![Page 38: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/38.jpg)
Using Find Infrastructure
proc FindObj { pString type} {
#set header will create find header..with correct names etc
capFindSetHeader $type
#then make cstring of what is to be searched
set findCString [DboTclHelper_sMakeCString $pString]
#now search and fill what you have searched
set capFindItemList [CapFindObjects $type $findCString]
capFindSetHeader $type
#for each item fill that item in find GUI…
#if for each item length of array is 1 means no occurance else
# second item is Occurance..
foreach item $capFindItemList {
set nullObj 0_p_DboInstOccurrence
set baseobj [lindex $item 0]
set len [llength $item ]
if { $len == 2 } {
set occObj [lindex $item 1]
capFindAddItem $type $baseobj $occObj
} else {
capFindAddItem $type $baseobj NULL
}
}
#activate find window
capFindActivateWindow $type
#save data in CSV..at design location with name design.csv
capFindSaveInCSV $pString
}
(C) FlowCAD Confidential
38
![Page 39: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/39.jpg)
Generate Part in TCL
set list1 [list [list “part1" "1" "U" "1"] [list “1" “pinname1" "3 State" "1" "Clock" "5" "Top" "A"]]
set list2 [list [list “part2" "1" "U" "1"] [list “1" "tcl" "Bidirectional" "1" "Line" "5" "Left" "A"]]
capCreatePartsFromData "true" "D:\\lib.olb" [list $list1 $list2]
(C) FlowCAD Confidential
39
![Page 40: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/40.jpg)
Read Skill (LISP) Data files (prp files)
(C) FlowCAD Confidential
40
![Page 41: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/41.jpg)
Write your own netlisters
half add_B
HALFADD.SCH
X
Y CARRY
SUM
half add_A
HALFADD.SCH
X
Y CARRY
SUM
CARRY_OUT
SUM
Y
X
CARRY_IN
U1A
74LS32
1
23
X_BAR
X
CARRY
SUM
Y
U1B
74LS32
4
56
U2C
74LS089
108
U2B
74LS08
4
56
U3B
74LS04
34
U2A
74LS081
23
U3A74LS04
12
X_BAR
X
CARRY
SUM
Y
U1C
74LS32
9
108
U4B
74LS084
56
U4A
74LS08
1
23
U3D
74LS04
98
U2D
74LS0812
1311
U3C74LS04
56
Connectivity changes only on Instance hierarchy
(C) FlowCAD Confidential
41
![Page 42: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/42.jpg)
Hybrid Applications = Native + Web
• TCL Interface to create dock-
able MFC containers with IE9
control
– Control Window
– View
– Dialog
• TCL Interface to load
JavaScript into containers
• JSON data bridge between
TCL interface and Javascript
Portability in any MFC application – SCM/Capture/PSpice/ModelEditor/AA etc.
(C) FlowCAD Confidential
42
![Page 43: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/43.jpg)
<body> <div id="wrapper"> <div id="viewDiv" title="OrCAD Prime Graphics View"></div> <div id="viewDiv1" title="OrCAD Prime Graphics View"></div> </div> </body>
Graphical Views in your Application
Design and Symbol views are available
(C) FlowCAD Confidential
43
![Page 44: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/44.jpg)
Access CIS Data
• Only available from
Capture GUI
• Only commands available
are documented in
sample
– <hier>\tools\capture\tclscrip
ts\capCustomSamples\cap
CIS.tcl
• Part Manager MUST be
launched at least once
before usage of CIS TCL
CIS Core Design Data
Group Container
Group#1
Parts Data
Subgroup#1 Data
Group#2
Parts Data
SubGroup#1 Data
Variant
Group SubGroup
(C) FlowCAD Confidential
44
![Page 45: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/45.jpg)
Graphical Display of Database
TCL Customization Possibilities
(C) FlowCAD Confidential
45
![Page 46: What‘s New in 16.6 Release - Flow CAD · 2012-11-22 · Super Hotfixes • 16.6 is the last release on 16.x database • 17.0 is the next and is scheduled for H1 2014 –Major upgrades](https://reader030.vdocuments.site/reader030/viewer/2022040120/5e9649df95a4af3e5f02090b/html5/thumbnails/46.jpg)
End
Thank you for your attention!
For any questions or feedback, please
contact us:
Tel.: + 41 (0) 56 485 91 91
E-Mail: [email protected]