wellhead data
TRANSCRIPT
-
8/16/2019 Wellhead Data
1/32
FC wellhead systemsEconomical solutions for surface drilling and completion
-
8/16/2019 Wellhead Data
2/32
FC wellhead systems
VetcoGray has been an industry leader in surfacewellhead technologies for over a century. The FC series
is the cornerstone of our portfolio – economical commoditywellhead products covering all standard technicalrequirements. With an exceptional track record, fullycustomized to any specification, and designed forincreased compatibility with non-VetcoGray equipment,FC is the smart choice for any standard application,
whether on land or offshore.
Table of contents
Economical solutions for surface drilling
and completion
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Committed to quality . . . . . . . . . . . . . . . . . . . . 4
Temperature/Material class . . . . . . . . . . . . . . . . . . . . 5
FC wellhead systems
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Casing heads . . . . . . . . . . . . . . . . . . . . . . . . . 8
Casing spools . . . . . . . . . . . . . . . . . . . . 10
Casing hangers . . . . . . . . . . . . . . . . . . . . 12
Primary packoffs . . . . . . . . . . . . . . . . . . . . . . . . . 15
Secondary packoffs . . . . . . . . . . . . . . . . . . . . 16
Tubing heads . . . . . . . . . . . . . . . . . . . . 17
Tubing hangers . . . . . . . . . . . . . . . . . . . . . . . . . 19
Electric Submersible Pump (ESP) completions . . . . . 22
Tubing head adapters . . . . . . . . . . . . . . . . . . . . 23
Flow-control systems
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
VG-M wedge-style gate valve . . . . . . . . . . . . . . . . . 28
VG-200 gate valve . . . . . . . . . . . . . . . . . . . . . . . . . .28
VG-300 gate valve . . . . . . . . . . . . . . . . . . . . . . . 29
Service tools and accessories
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Service tools and accessories . . . . . . . . . . . . . . . . . 32
Corporate overview . . . . . . . . . . . . . . . . . . . . 34
2
-
8/16/2019 Wellhead Data
3/32
33
World-class and worldwide
VetcoGray, a GE – Oil & Gas business, maintains a global
network of advanced research, manufacturing, service and
repair facilities to meet all our customers' needs. We employ
over 5,000 personnel at more than 90 locations in over 60
countries – and these facilities draw on all the integrated
strengths of various other GE Oil & Gas and resources
worldwide. Everything we do is geared toward providing
the most highly engineered exploration and production
equipment to help develop your field in a safe and timely
manner.
People and technology
VetcoGray products are widely known technology
leaders in their respective industry sectors. Every design
is a result of experience and innovation. Our people are
experts in their fields – continually combining tried-and-
true products with the latest technologies proven throughrigorous testing procedures and field performance in oil
and gas applications as well as other demanding high-tech
industries such as aviation, healthcare and energy.
Safety and flexibility
While our approach to product development may involve
complex research and manufacturing techniques, our vision
for the FC line is quite simple: to offer reliable wellhead
systems that are simultaneously cost effective and safety
focused as they help customers profitably develop valuable
oil and gas resources.
Our FC wellhead systems are designed and manufactured
to cover all moderate drilling and production requirements.
Onshore and offshore products are available for immediate
delivery in pressures up to 10,000 psi. This brochure is
intended as a resource to assist in decision making with
your VetcoGray representative.
Economical solutions for surface drilling and completion
-
8/16/2019 Wellhead Data
4/32
4
Committed to quality
Safety and reliability are two things we take very seriously
– in the final systems we provide as well as the design
and manufacturing processes we use to create them.
All VetcoGray FC wellhead products meet applicable API
certification standards.
API product specification levels
• PSl 1 equipment is used when working pressures are less
than 5,000 psi
• PSL 2 equipment is typically used or gas wells up to 5,000
psi working pressure, or liquid wells with H2S up to 5,000
psi working pressure
API performance requirements
Performance requirements are unique to each product in
its as-shipped condition. All our products are designed to
meet specific requirements for pressure and temperature
ranges and the test fluids consistent with the material class
for which they are rated. Other requirements include loadcapacity, cycles and operating force or torque. There are
two performance requirement levels, PR1 and PR2, the
latter representing more rigorous requirements.
Casing hanger group levels
• Group 1 – hangs pipe; no annular seal
• Group 2 – hangs pipe; seals pressure rom one direction
• Group 3 – hangs pipe; seals pressure rom top and bottom
with or without ring-joint isolation seal and
downhole lines
• Group 4 – same as Group 3; hanger held in place by
mechanical means applied to a retention
eature; hanger retention is independent o any
subsequent number of wellhead components
• Group 5 – same as Group 4; hanger will receive back-
pressure valve
Features & benefits
• Ideal or all drilling and production applications
• Elastomeric seals
• Pressure range: 2,000 to 10,000 psi
• Temperature range -75ºF to 250ºF
• Material trim AA to HH available
• Compatible with other commodity wellhead
components
• Available in API product specifcation levels 1-3• API perormance rating: PR2
Temperatureclassification
Operating range
°C °F
min. max. min. max.
K -60 82 -75 180
L -46 82 -50 180
N -46 60 -50 140
P -29 82 -20 180
R Room temperature Room temperature
S -18 66 0 150
T -18 82 0 180
U -18 121 0 250
V 2 121 35 250
Temperature class
Material class
Minimum material requirements
Body bonnet, end and
outlet connections
Pressure -controllingparts, stems and
mandrel hangers
AA - General Service Carbon or low-alloy steel Carbon or low-alloy steel
BB - General Service Carbon or low-alloy steel Stainless steel
CC - General Service Stainless steel Stainless steel
DD - Sour Servicea Carbon or low-alloy steelb Carbon or low-alloy steelb
EE - Sour Servicea Carbon or low-alloy steelb Stainless steelb
FF - Sour Servicea Stainless steelb Stainless steelb
HH - Sour Servicea CRAsbcd CRAsbcd
a As defined by NACE MR 0175b In compliance with NACE MR0175/ISO 15156
c CRA required on retained uid wetted suraces only; CRA
cladding of low alloy or stainless steel is permitted.d CRA as defned in clause 3 o this International Standard;
NACE MR0175/ISO 15156 definition of CRA does not apply.
Material class
Economical solutions for surface drilling and completion
-
8/16/2019 Wellhead Data
5/32
VetcoGray's FC wellhead system is a low-cost, fast-delivery solution covering all standard API technicalrequirements for onshore and offshore service atpressures up to 10,000 psi. Our strategy for the FC lineincludes fewer product variations, which increasescompatibility and interchangeability with non-VetcoGrayequipment. As a result, customers benefit from theproven reliability and performance of our FC wellhead
system products.
Maximum flexibility
-
8/16/2019 Wellhead Data
6/32
6
FC wellhead systems
Casing heads
FC22 and FC29 casing heads have a straight-bore bowl
design that minimizes risk of damage to sealing areas by
drilling tools, and prevents test-plug and bowl-protector
wedging problems when pressure is applied. The design
also reduces maintenance costs and enables suspension of
heavy casing loads. FC29 casing heads provide the added
flexibility of handling high-capacity FC29-W and FC29-WE
casing hangers.
Compatibility
• FC22 bowl – compatible with VetcoGray casing hangers
FC21, FC22, FC22M
• FC29 bowl – compatible with VetcoGray casing hangers
FC29-W, FC29-WE
Bowl protector retainer screws
• ST option available in upper ange or drilling with
a bowl protector
Bottom connections
• Slip on or welding
• Threaded bottom connections (8rd or buttress)
Outlets
• LP and studded are standard*
• LP = 2” outlet rated or 5,000 psi*
• Studded outlets contain ISO VR threads
* Bolt and nut coating and plating may vary depending
on regional requirements and standards
Standard casing head trims available
For specific API codes, add the appropriate dash number
below to the part number.
• (-1) PSL-1, PR-2, AA, P-U
• (-2) PSL-2, PR-2, AA, P-U**
• (-3) PSL-1, PR-2, DD-NL, L-U
• (-4) PSL-2, PR-2, DD-NL, L-U**
** Include zinc-plated studs
ST option FC29 casing head
Working pressure 2,000 to 10,000 psi FC21*, FC22, FC22M,
FC29-W, FC29-WE
Temperature rating -50°F to 250°F FC21*, FC22, FC22M,
FC29-W, FC29-WE
Hanging capacity ≤ 50% body yield strength FC21*, FC22, FC22M
≤ 80% body yield strength** FC29-W, FC29-WE
Annulus seal mechanism Automatic FC22, FC29-W
Manual FC21*, FC22M, FC29-WE
* Independent packoff available
** Full joint strength available. Consult VetcoGray for specific applications
Slip hanger selection guide
-
8/16/2019 Wellhead Data
7/32
7
FC wellhead systems
Casing heads
Topflange
size
Workingpressure
Casingsize
Outletsize
Dim. Aref
Dim. Bref
Dim. C Dim. D Approxweight
SOWbottom
Threadedbottom
in psi in in in in in lb
11 2,000 8 5/8 2" LP 16 7/8 9 1/8 8 10 7/8 340 H143773 H152284
11 2,000 8 5/8 2 1/16" Std 20 1/2 12 1/2 8 10 7/8 350 H143797 H152285
11 2,000 9 5/8 2" LP 16 7/8 9 1/8 9 10 7/8 320 H144029 H152289
11 2,000 9 5/8 2 1/16" Std 20 1/2 12 1/2 9 10 7/8 460 H144099 H152286
11 2,000 10 3/4 2" LP 16 7/8 9 1/8 10 10 7/8 300 H144044 H152287
11 3,000 8 5/8 2" LP 17 1/8 9 1/2 8 10 7/8 460 H144048 H152288
11 3,000 8 5/8 2 1/16" Std 20 5/8 12 5/8 8 10 7/8 480 H144101 H152290
11 3,000 9 5/8 2" LP 17 1/8 9 1/2 9 10 7/8 430 H144055 H152291
11 3,000 9 5/8 2 1/16" Std 20 5/8 12 5/8 9 10 7/8 450 H144108 H152314
11 3,000 10 3/4 2 1/16" Std 20 5/8 12 5/8 10 10 7/8 410 H144147 H152326
13 5/8 2,000 13 3/8 2" LP 16 5/8 8 7/8 12 1/2 13 1/2 420 H144065 H152305
13 5/8 2,000 13 3/8 2 1/16" Std 18 1/8 11 1/8 12 1/2 13 1/2 380 H144121 H152320
13 5/8 3,000 11 3/4 2" LP 18 5/8 10 1/2 11 13 1/2 720 H144069 H152308
13 5/8 3,000 11 3/4 2 1/16" Std 18 1/8 11 1/8 11 13 1/2 700 H144127 H152322
13 5/8 3,000 13 3/8 2" LP 18 5/8 10 1/2 12 1/2 13 1/2 540 H144078 H152310
13 5/8 3,000 13 3/8 2 1/16" Std 18 1/8 11 1/8 12 1/2 13 1/2 520 H144132 H152324
FC22 casing head
Topflange
size
Workingpressure
Casingsize
Outletsize
Dim. Aref
Dim. Bref
Dim. C Dim. D Approxweight
SOWbottom
Threadedbottom
in psi in in in in in lb
11 5,000 8 5/8 2" LP 19 3/8 13 8 10 7/8 700 H144061 H152338
11 5,000 8 5/8 2 1/16" Std 19 3/8 12 7/8 8 10 7/8 720 H144111 H152345
11 5,000 9 5/8 2" LP 19 3/8 13 9 10 7/8 690 H148316 H152341
11 5,000 9 5/8 2 1/16" Std 19 3/8 12 7/8 9 10 7/8 700 H144114 H152315
11 5,000 10 3/4 2 1/16" Std 19 3/8 12 7/8 10 10 7/8 680 H144117 H152318
13 5/8 5,000 13 3/8 2" LP 20 1/4 12 3/4 12 1/2 13 1/2 1150 H144081 H152331
13 5/8 5,000 13 3/8 2 1/16" Std 20 5/8 12 7/8 12 1/2 13 1/2 1170 H144135 H152337
16 3/4 3,000 16 2" LP 19 1/8 12 3/4 15 3/8 16 5/8 900 H144083 H152312
16 3/4 3,000 16 2 1/16" Std 20 3/4 13 15 3/8 16 5/8 1000 H155583 H152342
16 3/4 5,000 16 2 1/16" Std 21 14 1/4 15 3/8 16 5/8 1630 H144142 H152343
21 1/4 2,000 20 2" LP 18 5/8 11 6/8 19 3/16 20 1/8 950 H144094 H152335
20 3/4 3,000 20 2" LP 20 3/8 12 2/4 19 3/16 20 1/8 1300 H144091 H152333
20 3/4 3,000 20 2 1/16" Std 20 5/8 14 19 3/16 20 1/8 1300 H144145 H152344
FC29 casing head
-
8/16/2019 Wellhead Data
8/32
8
FC wellhead systems
Casing spools
FC22 and FC29 casing spools have a straight-bore bowl
design that accepts a variety of casing hangers, minimizes
risk of damage to sealing areas by drilling tools, and
prevents test-plug and bowl-protector wedging problems
when pressure is applied. FC29 heads have a deeper bowl
to handle the high capacity FC29-W, FC29-WE casing
hangers.
Compatibility
• FC22 bowl – compatible with VetcoGray casing hangers
FC21, FC22, FC22M
• FC29 bowl – compatible with VetcoGray casing hangers
FC29-W, FC29-WE
Bowl protector retainer screws
• ST option available in upper ange or drilling with a bowl
protector
Bottom prep
• BG/BG10 is a straight bore with a snap ring used to retain
the FPE secondary packoff intended for use up to 10,000 psi
• The lower ange includes a test port
Outlets
• LP and studded are standard*
• LP = 2” outlet rated or 5,000 psi*
• Studded outlets contain ISO VR threads
* Bolt and nut coating and plating may vary depending on regional
requirements and standards
Standard casing spool trims available
For specific API codes, add the appropriate dash number
below to the part number:
• (-1) PSL-1, PR-2, DD-NL, P-U
• (-2) PSL-2, PR-2, DD-NL, P-U**
• (-3) PSL-2, PR-2, DD-NL, L-U
• (-4) PSL-2, PR-2, DD-NL, L-U**
** Include zinc-plated studs
ST option
FC22 casing spool
-
8/16/2019 Wellhead Data
9/32
9
FC wellhead systems
Casing spools
Topflange
size
Workingpressure
BottomFlange
size
Workingpressure
Outletsize
Dim. Aref
Dim. Bref
Dim. C Dim. D Approxweight
Partnumber
in psi in psi in in in in lb
11 3,000 11 3,000 2" LP 22 1/2 10 1/4 8 10 7/8 1,000 H144027
11 3,000 11 3,000 2"-1/16" Std 22 1/2 12 1/4 8 10 7/8 1,050 H144183
11 3,000 13 5/8 2,000 2" LP 20 7/8 10 10 10 7/8 760 H144105
11 3,000 13 5/8 2,000 2"-1/16" Std 20 7/8 10 10 10 7/8 770 H144196
11 3,000 13 5/8 3,000 2" LP 17 3/8 8 7/8 10 10 7/8 800 H144123
11 3,000 13 5/8 3,000 2"-1/16" Std 21 10 10 10 7/8 950 H144245
13 5/8 3,000 20 3/4 3,000 2"-1/16" Std 25 3/8 12 1/4 12 1/2 13 1/2 1,850 H144271
FC22 casing spool
Topflange
size
Workingpressure
Bottomflange
size
Workingpressure
Outletsize
Dim. Aref
Dim. Bref
Dim. C Dim. D Approxweight
Partnumber
in psi in psi in in in in lb
11 5,000 11 3,000 2 1/16" Std 25 3/8 14 8 10 7/8 1,250 H144257
11 5,000 11 5,000 2 1/16" Std 26 3/8 13 3/8 8 10 7/8 1,250 H144262
11 5,000 13 5/8 3,000 2" LP 24 5/8 13 3/8 10 10 7/8 1,300 H144149
11 5,000 13 5/8 3,000 2 1/16" Std 26 1/8 13 1/2 10 10 7/8 1,250 H144264
11 5,000 13 5/8 5,000 2 1/16" Std 26 3/8 13 5/8 10 10 7/8 1,450 H144266
11 5,000 16 3/4 3,000 2 1/16" Std 26 3/8 13 1/4 10 10 7/8 1,480 H144268
11 10,000 11 5,000 1 13/16" Std 27 5/8 14 1/2 8 10 7/8 2,000 H144287
11 10,000 11 5,000 2 1/16" Std 27 5/8 14 1/2 8 10 7/8 2,000 H149551
11 10,000 13 5/8 5,000 1 13/16" Std 29 3/8 15 10 10 7/8 2,200 H144350
11 10,000 13 5/8 5,000 2 1/16" Std 29 3/8 15 10 10 7/8 2,200 H144356
13 5/8 5,000 13 5/8 5,000 2 1/16" Std 26 5/8 13 1/4 10 13 1/2 2,100 H149557
13 5/8 5,000 16 3/4 3,000 2 1/16" Std 25 3/8 12 1/4 12 1/2 13 1/2 1,900 H144277
13 5/8 5,000 21 1/4 2,000 2 1/16" Std 25 3/8 13 5/8 12 1/2 13 1/2 2,100 H144280
13 5/8 5,000 20 3/4 3,000 2 1/16" Std 25 3/8 12 1/4 12 1/4 13 1/2 2,300 H144278
13 5/8 5,000 21 1/4 5,000 2 1/16" Std 27 1/2 13 3/4 12 1/2 13 1/2 3,400 H147930
13 5/8 10,000 13 5/8 5,000 2 1/16" Std 28 14 10 13 1/2 2,500 H149562
13 5/8 10,000 16 3/4 5,000 2 1/16" Std 29 15 1/4 12 1/2 13 1/2 3,100 H147879
13 5/8 10,000 21 1/4 5,000 2 1/16" Std 33 1/2 18 5/8 12 1/2 13 1/2 5,200 H144361
13 5/8 5,000 20 3/4 3,000 2 1/16" Std 28 1/4 14 12 1/2 13 1/2 3,100 H144283
FC29 casing spool
-
8/16/2019 Wellhead Data
10/32
10
FC wellhead systems
Casing hangers
Casing hangers are the most important elements in your
wellhead and are typically the primary driver in your
wellhead selection. Critical questions to ask when selecting
your casing hanger and wellhead:
• Will the seal be automatically or manually energized?
• What will the load capacity be?
• Will the hanger be pressure tested?
FC21
• No integral seal
• Primary packo available
• Medium load capacity
• Fits in FC22, FC29, FC22-ST and FC29-ST
FC22
• Seal is automatically energized• Minimum preload required
• Medium load capacity
• Fits in FC22 and FC22-ST without primary packo
• Fits in FC29 and FC29-ST with optional primary packo
FC22M
• Seal is manually energized
• Medium load capacity
• Fits in FC22 and FC22-ST without primary packo
• Fits in FC29 and FC29-ST with optional primary packo
FC29-W
• Seal is automatically energized
• Minimum preload required
• High load capacity
• Fits in FC29 and FC29-ST with optional primary packo
FC29-WE
• Seal is manually energized
• High load capacity
• Fits in FC29 and FC29-ST with optional primary packo
Standard casing hanger trims available
For specific API codes, add the appropriate dash number
below to the part number.
FC22, FC22M, FC29-W, FC29-WE
• (-1) PSL 1-3, PR-2, AA, P-U, GRP 3
• (-2) PSL 1-3, PR-2, DD-NL, U, GRP 3
• (-3) PSL 1-3, PR-2, AA, L, GRP 3
FC21
• Standard trim: PSL 1-3, PR-2, DD-NL, K-U, GRP 1
-
8/16/2019 Wellhead Data
11/32
11
FC wellhead systems
Casing hangers
FC21 casing hanger
Nominalflange
size
Casingsize
Dim. D Dim. L Approxweight
Partnumber
in in in in lb
11 4 1/2 10 13/16 4 15/16 95 H144415-1
11 5 10 13/16 4 15/16 90 H144418-1
11 5 1/2 10 13/16 4 15/16 85 H144419-1
11 7 10 13/16 4 15/16 65 H144420-1
11 7 5/8 10 13/16 4 15/16 60 H144421-1
13 5/8 7 13 7/16 4 15/16 125 H144422-1
13 5/8 7 5/8 13 7/16 4 15/16 125 H152186-1
13 5/8 8 5/8 13 7/16 4 15/16 100 H144423-1
13 5/8 9 5/8 13 7/16 4 15/16 80 H144424-1
13 5/8 9 7/8 13 7/16 4 15/16 80 H144425-1
13 5/8 10 3/4 13 7/16 4 15/16 75 H144426-1
16 3/4 10 3/4 16 9/16 5 3/8 190 H144428-1
16 3/4 11 3/4 16 9/16 5 3/8 185 H144429-1
16 3/4 13 3/8 16 9/16 5 3/8 120 H144430-1
20 3/4 13 3/8 20 1/16 5 3/8 285 H144431-1
FC21 casing hangers
FC22 casing hanger
Nominalflange
size
Casingsize
Dim. D Dim. L Approxweight
Partnumber
in in in in lb
11 4 1/2 10 13/16 7 5/8 100 H144172
11 5 1/2 10 13/16 7 5/8 90 H144253
11 6 5/8 10 13/16 7 5/8 85 H144363
11 7 10 13/16 7 5/8 75 H144255
11 7 5/8 10 13/16 7 5/8 60 H144260
13 5/8 5 1/2 13 7/16 7 5/8 160 H144364
13 5/8 7 13 7/16 7 5/8 150 H144291
13 5/8 7 5/8 13 7/16 7 5/8 140 H144365
13 5/8 8 5/8 13 7/16 7 5/8 125 H144293
13 5/8 9 5/8 13 7/16 7 5/8 110 H144295
13 5/8 9 7/8 13 7/16 7 5/8 100 H144366
13 5/8 10 3/4 13 7/16 7 5/8 90 H144368
16 3/4 10 3/4 16 9/16 9 255 H144370
16 3/4 11 3/4 16 9/16 9 245 H144371
16 3/4 13 3/8 16 9/16 9 230 H144372
20 3/4 13 3/8 20 1/16 9 1/4 330 H144297
FC22 casing hangers
FC22M casing hanger
Topflange
sizeCasingsize Dim. D Dim. L Approxweight Partnumber
in in in in lb
11 6 5/8 10 13/16 7 3/16 85 H144594
11 7 10 13/16 7 3/16 90 H144580
11 7 5/8 10 13/16 7 5/16 80 H144584
13 5/8 9 5/8 13 7/16 7 3/16 120 H144586
13 5/8 9 7/8 13 7/16 7 3/16 125 H144373
16 3/4 10 3/4 16 9/16 9 1/8 255 H144588
16 3/4 11 3/4 16 9/16 9 1/8 250 H144590
20 3/4 13 3/8 20 1/16 8 1/2 330 H144592
FC22M casing hangers
-
8/16/2019 Wellhead Data
12/32
12
Casing hangers
FC wellhead systems
Topflange
size
Casingsize
Dim. D Dim. L Approxweight
Partnumber
in in in in lb
11 7 10 13/16 7 3/4 100 H150742
11 7 5/8 10 13/16 7 3/4 90 H150731
13 5/8 7 13 7/16 8 1/16 190 H151906
13 5/8 7 5/8 13 7/16 8 1/16 180 H151316
13 5/8 8 5/8 13 7/16 8 5/16 155 H151908
13 5/8 9 5/8 13 7/16 8 1/16 130 H149537
13 5/8 9 7/8 13 7/16 8 1/16 125 H151863
13 5/8 10 3/4 13 7/16 8 1/16 100 H151318
16 3/4 10 3/4 16 9/16 8 3/8 230 H151321
16 3/4 13 3/8 16 9/16 8 3/8 145 H151323
20 3/4 13 3/8 20 1/16 8 7/8 355 H151325
FC29-W casing hangers
Topflange
size
Casingsize
Dim. D Dim. L Approxweight
Partnumber
in in in in lb
11 7 10 13/16 8 115 H147548
11 7 5/8 10 13/16 8 100 H151304
13 5/8 7 13 7/16 8 220 H151910
13 5/8 7 5/8 13 7/16 8 205 H151306
13 5/8 8 5/8 13 7/16 8 180 H151912
13 5/8 9 5/8 13 7/16 8 150 H147552
13 5/8 9 7/8 13 7/16 8 140 H15186513 5/8 10 3/4 13 7/16 8 115 H151308
16 3/4 10 3/4 16 9/16 8 265 H151310
16 3/4 13 3/8 16 9/16 8 165 H151312
20 3/4 13 3/8 20 1/16 8 405 H151314
FC29-WE casing hangers
FC29-W casing hanger
FC29-WE casing hanger
-
8/16/2019 Wellhead Data
13/32
13
Primary packoffs
Primary packoffs are installed on top of the auxiliary load
shoulder and seals, against the casing, and provide a static
seal between the casing string and casing head bore. This
allows the flange connection to be pressure tested without
adding load to the casing hanger.
FC22-O-R
• Used with the FC22 and FC29 bowls
• Rated up to 5,000 psi
• Used with 6B anges
FC22-ST-O
• Used with the FC22-ST and FC29-ST bowls
• Rated up to 5,000 psi
FC22-O-BX
• Used with the FC22 and FC29 bowls
• Rated up to 5,000 psi
• Used with BX anges
FC wellhead systems
Flangesize
Workingpressure
Casingpipe size
Partnumber
in psi in
11 5,000 4 1/2 H146561-1
11 5,000 5 H154846-1
11 5,000 51/2 H146568-1
11 5,000 7 H146572-1
11 5,000 7 5/8 H146575-1
13 5/8 3,000 7 H151894-1
13 5/8 3,000 7 5/8 H152848-1
13 5/8 3,000 8 5/8 H146582-1
13 5/8 3,000 9 5/8 H146584-1
13 5/8 3,000 9 7/8 H151896-1
13 5/8 3,000 10 3/4 H162346-1
16 3/4 3,000 10 3/4 H146607-1
16 3/4 3,000 11 3/4 H152852-1
20 3/4 3,000 13 3/8 H146612-1
FC22-O-R primary packoffs
Flangesize
Workingpressure
Casingpipe Size
Partnumber
in psi in
11 5,000 4 1/2 H146588-1
11 5,000 5 H152856-1
11 5,000 5 1/2 H146591-1
11 5,000 7 H146594-1
11 5,000 7 5/8 H151898-1
13 5/8 5,000 7 H151900-1
13 5/8 5,000 8 5/8 H151902-1
13 5/8 5,000 9 5/8 H146598-1
13 5/8 5,000 9 7/8 H151904-1
13 5/8 5,000 10 3/4 H162353-1
16 3/4 5,000 10 3/4 H146616-1
16 3/4 5,000 11 3/4 H152858-1
20 3/4 5,000 13 3/8 H146620-1
FC22-ST-O primary packoffs
Flangesize
Workingpressure
Casingpipe size
Partnumber
in psi in
13 5/8 5,000 7 H152211-1
13 5/8 5,000 7 5/8 H152850-1
13 5/8 5,000 8 5/8 H152213-1
13 5/8 5,000 9 5/8 H152215-1
13 5/8 5,000 9 7/8 H152217-1
13 5/8 5,000 10 3/4 H162357-116 3/4 5,000 10 3/4 H152219-1
16 3/4 5,000 11 3/4 H152854-1
21 1/4 5,000 13 3/8 H152221-1
FC22-O-BX primary packoffs
-
8/16/2019 Wellhead Data
14/32
14
Secondary packoffs
A secondary packoff verifies seal integrity of the flange
connection. It also serves as a crossover seal by sealing
around the casing and inside the bottom prep of the
casing spool or tubing head.
FPE
• Rated up to 10,000 psi
• Assembly consists o a body with a bit guide, sel-energizing
seal and retainer ring – all supported by a snap ring in the
BG/BG10 bowl
Consult a sales representative or engineering for sizes not shown
Standard secondary packoff trims available
For specific API codes, add the appropriate dash number
below to the part number:
• (-1) PSL 1-3, PR-2, AA, P-U
• (-2) PSL 1-3, PR-2, DD-NL, P-U
• (-3) PSL 1-3, PR-2, AA, L
Additional trims are available on request.
FC wellhead systems
Flangesize
Workingpressure
Casingpipe size
Casing cutoffheight
Partnumber
in psi in
11 10,000 4 1/2 5 1/2 H146495
11 10,000 5 5 1/2 H146507
11 10,000 5 1/2 5 1/2 H146498
11 10,000 7 5 1/2 H146497
11 10,000 7 5/8 5 1/2 H146501
13 5/8 10,000 8 5/8 6 H146505
13 5/8 10,000 9 5/8 6 H146512
16 3/4 10,000 13 3/8 6 1/2 H146515
FPE secondary packoff
FTCM tubing headFTC60 tubing head
-
8/16/2019 Wellhead Data
15/32
15
Tubing heads
FTCM
• A straight-bore bowl design minimizes risk o damage to
sealing areas by drilling tools and prevents wedging of the
tubing hangers, bowl protectors and test plugs
FTC60
• Designed with alignment screws to accommodate dual
tubing-string completions
Bottom prep
• Heads have a BG or BG10 prep to accept the FPE
secondary packoff
• Can be used up to 10,000 psi
• The lower ange includes a test port
Lockdown screws
• The upper ange is supplied with internally threaded
lockdown screws for packoff re-energization and for
retention as required for a Group 5 tubing hanger
Outlets
• LP and studded are standard*
• LP = 2” outlet rated or 5,000 psi*
• Studded outlets contain ISO VR threads
* Bolt and nut coating and plating may vary depending on regional
requirements and standards
Standard tubing head trims available
For specific API codes, add the appropriate dash number
below to the part number:
• (-1) PSL-1, PR-2, AA, P-U
• (-2) PSL-2, PR-2, AA, P-U**
• (-3) PSL-2, PR-2, AA, L-U
• (-4) PSL-2, PR-2, AA, L-U**
** Include zinc-plated studs
Additional trims are available upon request.
FC wellhead systems
Topflange
size
Workingpressure
Bottomflange
size
Workingpressure
Outletsize
Outletworkingpressure
Dim. Aref
Dim. Bref
Dim. C Dim. D Approxweight
Partnumber
in psi in psi in in in in lb
7 1/16 3,000 11 3,000 2 1/16" Std 5,000 21 9 3/4 6 13/16 7 600 H151513
7 1/16 5,000 11 3,000 2 1/16" Std 5,000 22 1/8 11 1/2 6 13/16 7 675 H151516
7 1/16 5,000 11 5,000 2 1/16" Std 5,000 25 1/8 11 3/4 6 13/16 7 900 H151520
7 1/16 10,000 11 5,000 2 1/16" Std 10,000 25 1/8 13 5/8 6 11/16 7 1150 H151523
11 5,000 13 5/8 5,000 2 1/16" Std 5,000 27 3/8 13 5/8 10 10 7/8 1500 H151526
FTC60 tubing head
Topflange
size
Workingpressure
Bottomflange
size
Workingpressure
Outletsize
Dim. Aref
Dim. Bref
Dim. C Dim. D Approxweight
Partnumber
in psi in psi in in in in lb
7 1/16 3,000 11 2,000 2" LP 21 9 3/4 6 7/16 7 550 H144473
7 1/16 3,000 11 3,000 2" LP 21 10 1/2 6 7/16 7 575 H146172
7 1/16 3,000 11 3,000 2 1/16" Std 21 9 3/4 6 7/16 7 600 H144516
7 1/16 3,000 13 5/8 3,000 2 1/16" Std 23 1/4 11 3/4 6 7/16 7 750 H144523
7 1/16 5,000 9 3,000 2 1/16" Std 21 3/4 11 1/2 6 7/16 7 575 H146165
7 1/16 5,000 11 3,000 2 1/16" Std 22 1/8 11 1/2 6 7/16 7 600 H144518
7 1/16 5,000 11 5,000 2 1/16" Std 25 1/8 11 3/4 6 7/16 7 850 H144521
7 1/16 5,000 13 5/8 3,000 2 1/16" Std 23 1/4 11 3/4 6 7/16 7 850 H144526
7 1/16 10,000 11 5,000 1 13/16" Std 25 1/8 11 7/8 6 3/8 7 1200 H144471
7 1/16 10,000 11 5,000 2 1/16" Std 25 1/8 11 7/8 6 3/8 7 1200 H144559
7 1/16 10,000 11 10,000 1 13/16" Std 25 11 1/2 6 3/8 7 1450 H144565
7 1/16 10,000 11 10,000 2 1/16" Std 25 11 1/2 6 3/8 7 1450 H144567
11 3,000 13 5/8 3,000 2 1/16" Std 22 1/4 11 1/2 10 10 7/8 850 H144529
11 5,000 11 3,000 2 1/16" Std 25 3/8 14 8 10 7/8 1280 H144531
11 5,000 11 5,000 2 1/16" Std 26 3/8 13 3/8 8 10 7/8 1300 H144533
11 5,000 13 5/8 5,000 2 1/16" Std 27 3/8 13 3/4 10 10 7/8 1600 H144535
11 10,000 11 5,000 1 13/16" Std 27 5/8 14 1/2 8 10 7/8 2000 H144571
11 10,000 11 10,000 2 1/16" Std 31 3/8 15 1/2 8 10 7/8 2450 H144577
11 10,000 13 5/8 5,000 1 13/16" Std 29 3/8 15 10 10 7/8 2200 H144573
11 10,000 13 5/8 5,000 2 1/16" Std 29 3/8 15 10 10 7/8 2200 H144575
FTCM tubing head
-
8/16/2019 Wellhead Data
16/32
16
FTC60
• Used with the FTC60 tubing head
• Split hanger with integral packo allowing selective and
independent running and pulling of tubing strings
• Annular packo seal is activated by lockdown screws
Standard tubing hanger trims available
For specific API codes, add the appropriate dash numberbelow to the part number:
7” tubing hangers
• (-1) PSL-2, PR-2, DD-NL, L-U, GRP 5
11” tubing hangers
• (-1) PSL-2, PR-2, DD-NL, P-U, GRP 5
• (-3) PSL-2, PR-2, DD-NL, L-U, GRP 5
Additional trims and threads are available on request.
Tubing hangers
FTC-C-XP1
• Standard tubing hanger arranged with compression
seal for the annulus, extended neck, with lift thread and
back-pressure valve profile
• 5,000 psi hanger – extended neck seal itted with O-rings
• 10,000 psi hanger – extended neck seal ftted with S seals
• FTC-C-XP1-CL uses the same geometry as the
FTC-C-XP1 with the addition o a control line port
• Premium connections available upon request
Top flangesize
Stringsize
Approxweight
Partnumber
in in lb
7 1/16 2 3/8 70 H147465
7 1/16 2 7/8 65 H147467
7 1/16 3 1/2 60 H147469
11 2 3/8 240 H147483
11 2 7/8 230 H147486
11 3 1/2 230 H147487
11 4 1/2 220 H148111
FTC-C-XP1 10M tubing hanger
FTC-C-XP1 tubing hanger
FC wellhead systems
FTC-C-XP1-CL tubing hanger
FTC-C-XP1-CL tubing hanger
Top flangesize
Stringsize
Approxweight
Partnumber
in in lb
7 1/16 2 3/8 70 H144376
7 1/16 2 7/8 65 H147246
7 1/16 3 1/2 60 H147249
11 2 3/8 240 H147471
11 2 7/8 230 H147473
11 3 1/2 230 H147475
11 4 1/2 230 H148108
FTC-C-XP1 5M tubing hanger
Top flangesize
Stringsize
Approxweight
Partnumber
in in lb
7 1/16 2 3/8 70 H147673
7 1/16 2 7/8 65 H147676
7 1/16 3 1/2 60 H147679
11 2 3/8 240 H147515
11 2 7/8 230 H147520
11 3 1/2 230 H147524
11 4 1/2 230 H147999
FTC-C-XP1-CL 5M tubing hanger
Top Flangesize
Stringsize
Approxweight
Partnumber
in in lb
7 1/16 2 3/8 70 H147682
7 1/16 2 7/8 65 H147685
7 1/16 3 1/2 60 H147688
11 2 3/8 240 H147989
11 2 7/8 230 H147992
11 3 1/2 230 H147995
11 4 1/2 220 H148002
FTC-C-XP1-CL 10M tubing hanger
FTC60 tubing hanger
TopFlange
size
Stringsize
Stringsize
3,000-5,000 psiApproxweight
10,000 psiApproxweight
Partnumber
in in in lb lb
7 1/16 2 3/8 2 3/8 75 80 H151530
11 2 3/8 2 3/8 245 325 H151533
11 2 3/8 2 7/8 240 330 H151535
11 2 7/8 2 7/8 230 335 H151537
FTC60 tubing hanger
-
8/16/2019 Wellhead Data
17/32
17
FTC-C-1W wrap-around packoff
• Wrap-around packo with a compression seal or
the annulus
• Used with FBO-2 tubing hanger coupling and the FBO-2
tubing head adapter
Tubing hangers
FBO-2 tubing hanger coupling
• Used in conjunction with the FBO-2 tubing head adapter
and the FTC-C-1W tubing hanger
• One piece and externally threaded with an ACME thread
• Provides internal top and bottom threads
• Used or completions that require string manipulation
• Back-pressure valve preparation provides well control until
christmas tree is installed
FTC-C-1W packoff
FC wellhead systems
FB0-2 tubing hanger
Top Flangesize
Stringsize
Approxweight
Partnumber
in in lb
7 1/16 2 3/8 70 H144597-1
7 1/16 2 7/8 65 H144600-1
7 1/16 3 1/2 60 H144603-1
11 3 1/2 180 H152627-1
11 4 1/2 165 H152629-1
FTC-C-1W tubing hanger
FBO-2 tubing hanger coupling
Stringsize
10,000 psiapproxweight
Partnumber
in in
2 3/8 20 H150033-1
2 7/8 15 H150036-1
3 1/2 35 H150039-1
4 1/2 45 H152600-1
FBO-2 tubing hanger coupling
-
8/16/2019 Wellhead Data
18/32
18
Electric Submersible Pump (ESP)completions
VetcoGray has a long history of completions interfacing
with Electric Feed Through Mandrels (EFT) for ESPs from
a variety of manufacturers. Our FC wellhead system
can easily be configured to fit your ESP completion
requirements. To learn more, please consult yourVetcoGray representative.
FC wellhead systems
-
8/16/2019 Wellhead Data
19/32
19
Tubing head adapters
XP1 & XP1-CL
• XP1 has a seal pocket or the FTC-C-XP1 tubing
hanger neck
• XP1-CL is arranged or a continuous control line and will
accept the FTC-C-XP1-CL tubing hanger
• Available or string sizes: 2 3/8”, 2 7/8”, 3 1/2”
and 4 1/2”
FBO-2 tubing head adapter
• Consists o a ange or studded bottom with a emale
ACME threaded box bottom
• Designed to accept the FBO-2 coupling
• Up to 10,000 psi or the FTC-C-1W
• For tubing string sizes: 2 3/8”, 2 7/8”, 3 1/2” and 4 1/2”
Dual tubing head adapter
• Bottom connection is a studded ange to be directly
assembled to the tubing head upper flange
• Designed to work in conjunction with the FTC60
tubing hanger
• Available or tubing string sizes: 2 3/8” and 2 7/8”
Standard tubing head trims available
For specific API codes, add the appropriate dash number
below to the part number:
• (-1) PSL-2, DD-NL, P-U, PR-2
• (-2) PSL-2, DD-NL, P-U, PR-2*
• (-3) PSL-2, DD-NL, L-U, PR-2
• (-4) PSL-2, DD-NL, L-U, PR-2*
* Include zinc-plated studs.
Bolt and nut coating and plating may vary depending on regional
requirements and standards.
Additional tubing head sizes and trims are available upon request
19
Dual tubing head adapter
XP1 tubing head adapter
FBO-2 tubing head adapter
FC wellhead systems
-
8/16/2019 Wellhead Data
20/32
20
Tubing head adapters
Bottomflange
size
Workingpressure
Topflange
size
Workingpressure
Tubingsize
Approxweight
Partnumber
in psi in psi in lb
7 1/16 3,000 2 1/16 5,000 2 3/8 200 H147555
7 1/16 3,000 2 9/16 5,000 2 7/8 225 H147557
7 1/16 5,000 2 1/16 5,000 2 3/8 275 H147560
7 1/16 5,000 2 9/16 5,000 2 7/8 300 H147563
7 1/16 5,000 3 1/8 5,000 3 1/2 300 H147565
7 1/16 10,000 2 1/16 5,000 2 3/8 600 H147567
7 1/16 10,000 2 1/16 10,000 2 7/8 600 H147569
7 1/16 10,000 2 9/16 10,000 2 7/8 600 H147571
7 1/16 10,000 3 1/16 10,000 3 1/2 600 H147573
11 5,000 3 1/8 5,000 3 1/2 920 H147575
11 5,000 4 1/16 5,000 4 1/2 1,300 H147577
11 10,000 3 1/16 10,000 3 1/2 1,300 H147583
11 10,000 4 1/16 10,000 4 1/2 1,350 H147580
FBO-2 tubing head adapter
BottomFlange
s ize
Workingpressure
Topflange
size
Workingpressure
Tubingsize
Approxweight
Partnumber
in psi in psi in lb
7 1/16 3,000 2 1/16 3,000 2 3/8 275 H148022
7 1/16 3,000 2 9/16 3,000 2 7/8 275 H148025
7 1/16 3,000 3 1/8 3,000 3 1/2 275 H148031
7 1/16 3,000 3 1/8 5,000 3 1/2 275 H148028
7 1/16 5,000 2 1/16 5,000 2 3/8 300 H147730
7 1/16 5,000 2 9/16 5,000 2 7/8 300 H147732
7 1/16 5,000 3 1/8 5,000 3 1/2 300 H147734
7 1/16 10,000 2 1/16 10,000 2 3/8 450 H147744
7 1/16 10,000 2 9/16 10,000 2 7/8 450 H147746
7 1/16 10,000 3 1/16 10,000 3 1/2 625 H147748
11 3,000 2 1/16 5,000 2 3/8 575 H147034
11 3,000 2 9/16 5,000 2 7/8 575 H148037
11 3,000 3 1/8 5,000 3 1/2 575 H148040
11 5,000 2 1/16 5,000 2 3/8 675 H147591
11 5,000 2 9/16 5,000 2 7/8 675 H147594
11 5,000 3 1/8 5,000 3 1/2 675 H147595
11 10,000 2 1/16 10,000 2 3/8 975 H147601
11 10,000 2 9/16 10,000 2 7/8 950 H147603
11 10,000 3 1/16 10,000 3 1/2 1000 H147605
XP1-CL tubing head adapter
Bottomflange
size
Workingpressure
Topflange
size
Workingpressure
Approxweight
Partnumber
in psi in psi lb
7 1/16 3,000 2 1/16 5,000 200 H151626
7 1/16 5,000 2 1/16 5,000 275 H151631
11 3,000 2 1/16 5,000 425 H151627
11 5,000 2 9/16 5,000 450 H151629
Dual tubing head adapter
FC wellhead systems
-
8/16/2019 Wellhead Data
21/32
21
Bottomflange
size
Workingpressure
Topflange
size
Workingpressure
Tubingsize
Approxweight
Partnumber
in psi in psi in lb
7 1/16 3,000 2 1/16 5,000 2 3/8 170 H147611
7 1/16 3,000 2 9/16 5,000 2 7/8 170 H147613
7 1/16 3,000 3 1/8 3,000 3 1/2 170 H148018
7 1/16 3,000 3 1/8 5,000 3 1/2 160 H147615
7 1/16 5,000 2 1/16 5,000 2 3/8 220 H147415
7 1/16 5,000 2 9/16 5,000 2 7/8 220 H147429
7 1/16 5,000 3 1/8 5,000 3 1/2 215 H147432
7 1/16 5,000 2 1/16 10,000 2 3/8 220 H149139
7 1/16 5,000 2 9/16 10,000 2 7/8 220 H149141
7 1/16 5,000 3 1/16'' 10,000 3 1/2 220 H149143
7 1/16 10,000 2 1/16 10,000 2 3/8 370 H147495
7 1/16 10,000 2 9/16 10,000 2 7/8 370 H147498
7 1/16 10,000 3 1/16 10,000 3 1/2 370 H147501
11 3,000 2 1/16 5,000 2 3/8 370 H147621
11 3,000 2 9/16 5,000 2 7/8 390 H147623
11 3,000 3 1/8 5,000 3 1/2 390 H147625
11 3,000 4 1/16 5,000 4 1/2 380 H149155
11 5,000 2 1/16 5,000 2 3/8 370 H147438
11 5,000 2 9/16 5,000 2 7/8 570 H147440
11 5,000 3 1/8 5,000 3 1/2 570 H147442
11 5,000 4 1/16 5,000 4 1/2 580 H149157
11 5,000 2 1/16 10,000 2 3/8 580 H149145
11 5,000 2 9/16 10,000 2 7/8 580 H149148
11 5,000 3 1/16 10,000 3 1/2 570 H149150
11 5,000 4 1/16 10,000 4 1/2 560 H149159
11 10,000 2 1/16 10,000 2 3/8 975 H147696
11 10,000 2 9/16 10,000 2 7/8 975 H147699
11 10,000 3 1/16 10,000 3 1/2 925 H147702
11 10,000 4 1/16 10,000 4 1/2 950 H149163
XP1 tubing head adapter
FC wellhead systems
-
8/16/2019 Wellhead Data
22/32
-
8/16/2019 Wellhead Data
23/32
Since our Graygate valve was introduced in the mid1960s, VetcoGray's research and development programshave continually delivered control products with long,
dependable service lives and maximal cost effectiveness.Our valves offer advanced design features for a broadrange of applications, including wellhead annulus,production trees and manifolds – all manufactured inaccordance to ISO-9001 and API Q1 quality standards.
Maximum control
-
8/16/2019 Wellhead Data
24/32
24
VG-M wedge-style gate valve
The VG-M uses the expanding-gate operating principle
to produce a tight , positive seal for a wide range of
pressures, temperatures, material classifications and
product specification levels in accordance to API-6A.
This commodity valve line is used in normal operating
conditions where no SSV is required. It is in service
worldwide on production trees and wellhead annuli
in low alloy, stainless and H2S-resistant trims with a
combination of resilient and metal-to-metal sealing
configurations.
Cost effective
• Industry standard
• Low-cost parts readily available
• Minimal maintenance costs
VG-200 slab gate valve
The VG-200 has a simple design ideal for general service
applications in working pressures of 5,000 psi or lower. It
is in service worldwide on production trees and wellhead
annuli in low alloy, stainless and H2S-resistant trims with
both resilient and metal-to-metal sealing configurations.
Cost effective
• Simple design assures low cost
• Low-cost parts readily available
• Minimal maintenance costs
Features & benefits
• Sizes 1 13/16” to 4 1/16”
• Pressure ratings up to 10,000 psi
• Certifed PR-2 -50ºF to 250ºF
• Parallel expanding gate provides positive seal
across both seats
• Stem packing is re-energizable
• Balanced stem on 10,000 psi valve
• API perormance rating: PR2
Features & benefits
• Sizes 2 1/16” to 4 1/16”
• Pressure ratings up to 5,000 psi
• Certifed to PR2, Annex F, -75ºF to 250ºF
• Bi-directional; no body penetrations
• Metal-to-metal stem backseat; manual or
actuated; compatible with VetcoGray actuators
or those of other leading manufacturers
• Seats are feld-replaceable without requiring
special tools
• Ultra low-torque
Flow control systems
Gate sizes Pressure rating Certification
VG-M Expanding 1 13/16” to 4 1/16” ≤ 10,000 psi PR2-6A, -50ºF to 250º
VG-200 Slab 2 1/16” to 4 1/16” ≤ 5,000 psi PR2, Annex F, -75ºF to 250º
VG-300 Slab 2 1/16” to 9” < 10,000 psi (10,000-15,000 psi) or
< 5,000 psi
PR2, Annex F, -75ºF to 350ºF
Valve selection guide
-
8/16/2019 Wellhead Data
25/32
25
VG-300 slab gate valve
The VG-300 is a high-performance valve for high-
pressure applications. This downstream sealing valve
minimizes the forces needed to operate it and is available
in all pressure ranges. This feature ensures that, in a fail-
safe actuated valve, pressure can enter the gate cavity
to provide additional closing force on the stem. The
VG-300 is firmly established in the industry and is in
service worldwide.
Cost effective
• Simple design assures low cost
• Low-cost parts readily available
• Minimal maintenance costs
VG-200 gate valve
Size Endconnection
Pressure
Configuration
PSL-1, PR-1,DD-NL, P-U
PSL-2, PR-2,DD-NL, P-U
PSL-2, PR-2,DD-NL, L-U
PSL-2, PR-2,EE, P-U
PSL-2, PR-2,EE, L-U
in psi
2 1/16 Threaded 5,000 H130701-7 H130701-8 H144201-3 H144201-4 H144201-5
2 1/16 Flanged 5,000 H130700-8 H130700-2 H144201-6 H130700-76 H144201-7
Recommended VG-200 annulus gate valves
SizeEnd
connection Pressure
Configuration
PSL-1, PR-2,P-U, DD-NL
PSL-2, PR-2,P-U, DD-NL
PSL-1, PR-2,L-U, DD-NL
PSL-2, PR-2, L-U,DD-NL
in psi
1 13/16 Flanged 10,000 H154477-1 H154477-2 H154477-3 H154477-4
2 1/16 Threaded 5,000 H154481-1 H154481-2 H154481-3 H154481-4
2 1/16 Flanged 5,000 H136716-1 H136716-41 H136716-30 H136716-162 1/16 Flanged 10,000 H154472-1 H154472-2 H154472-3 H154472-4
Recommended VG-M wedge style annulus valves
Flow control systems
Features & benefits
• Sizes 2 1/16” to 9”
• Pressure ratings rom 5,000 psi
• Certifed to PR2, Annex F, -75ºF to 350ºF
• Bi-directional; no body penetrations
• Metal-to-metal stem backseat
• Manual or actuated; compatible with VetcoGray
actuators or those of other leading manufacturers
• Seats are feld-replaceable without requiring
special tools
• Ultra low-torque
• Other sizes, pressure ratings and trims available
upon request
Size Pressure
Configuration
PSL-2, PR-2, DD-NL, P-U PSL-2, PR-2, DD-NL, L-U
in psi
1 13/16 10,000 H130806-2 H130806-43
2 1/16 10,000 H144305-4 H130806-9
Recommended VG-300 annulus gate valves
VG-M 3M/5M wedge style gate valve
VG-300 gate valve
-
8/16/2019 Wellhead Data
26/32
-
8/16/2019 Wellhead Data
27/32
Working with VetcoGray, you can be confident that youare working with the industry’s highest standards ofquality, safety and reliability. We provide all theexperienced personnel, service tools and accessoriesneeded to maintain optimal performance levels foryour wellhead and completion equipment. Our regularlyscheduled maintenance programs can prevent costly
repairs and shutdowns, significantly extend equipmentlife and minimize overall lifecycle operating costs. Ourglobal service network provides all aftermarket servicesfor every application, enabling our customers to get thegreatest value out of their wells.
Maximum support
-
8/16/2019 Wellhead Data
28/32
28
Service tools and accessories
FTC & FC test plug
• Designed to carry your drill string below and test your
connection, bowls and BOP stack
FC-A running and retrieval tool
• Designed to run or retrieve your bowl protector withoutpulling your whole drill string
FTCR-A & FCR-A combination tool
• Has a test plug on one side, and the running and
retrieval tool on the other – greatly simplifying your
tool-management requirements
FTC-A & FC-A bowl protector
• Full bore and are designed or extreme durability in
extreme operating conditions
Lubricator tool
• Used to set and retrieve plugs under pressure
• Can be used with a Back Pressure Valve (BPV) or a Valve
Removal (VR) Plug
• Uses pressure directly rom the well or rom an external
pressure source
• Pressure is balanced between the tool's upper and
lower housing, giving your technician complete control
during descent or ascent
Bowlsize Threads Partnumber
in
7 3 1/2 IF H167328-1
11 4 1/2 IF C3010035-1
13 5/8 4 1/2 IF C3010036-1
16 x 11* 4 1/2 IF C3020013-1
20 x 11* 4 1/2 IF C3020015-1
FTCR-A & FCR-A combination tool
*Adapter only, 11 combo tool must
be ordered separately
Bowlsize Threads
Partnumber
in
7 3 1/2 IF H152864-1
11 4 1/2 IF H152903-1
13 5/8 4 1/2 IF H152907-1
16 x 11* 4 1/2 IF H155965-1
20 x 11* 4 1/2 IF H155968-1
FTC & FC test plug
*Adapter only, 11 test plug must be
ordered separately
Bowlsize Threads
Partnumber
in
11 4 1/2 IF H149903-1
13 5/8 4 1/2 IF H149907-1
16 x 11* 4 1/2 IF H149932-1
20 x 13 5/8* 4 1/2 IF H149935-1
FC-A running and retrieval tool
*Adapter only, 11 R/R Tool must be
ordered separately
Bowlsize
Partnumber
in
7 H167324-1
11 H149889-1
13 5/8 H149895-1
16 H149897-1
20 H149899-1
FTC-A & FC-A bowl protector
Service tools and accessories
-
8/16/2019 Wellhead Data
29/32
29
Service tools and accessories
Lubricator toolpart number CM004060-1
Item Size PressurePart
number
in psi
ISO VR PLug 1 13/16 0-10,000 H137287-11
ISO VR PLug 2 1/16 0-10,000 H137287-12
ISO Bull PLug 1/2" LP Part 2 5,000 H126671-1
ISO Bull PLug 2 5,000 H126671-2
ISO Bull PLug 1/2" LP A/F VR 2 5,000 H114224-2
Bull & VR plugs
Size Material Trim
H backpressure
check partnumber
H two waycheck part
number
Nominal
2 4130 NACE AA,DD-NL H30 102 1-41 H30 102 1-50
2 17-4 PH NACE CC,FFO.5 170241 170246
2 1/2 4130 NACE AA,DD-NL H30 102 1-48 H301 02 1-49
2 1/2 17-4 PH NACE CC,FFO.5 170242 170247
3 4130 NACE AA,DD-NL 168596 H301021-51
3 17-4 PH NACE CC,FFO.5 170243 170248
4 4130 NACE AA,DD-NL H30 102 1-43 H301 021 -42
4 17-4 PH NACE CC,FFO.5 170244 170249
Back pressure valves
Flangesize
Pressurerating
Studlength
Stud w/ two nuts part number
A193-B7 StudA194-GR2H Nuts
A193-B7 StudA194-GR2H Nuts
A320-L7 StudA194-GR7 Nuts
in psi (per AWHEM) Non-plated Zinc plated Non-plated
2 1/16 3,000-5,000 7/8 x 6 1/4 70004 70206 H300117-195
2 1/16 10,000 3/4 x 5 1/2 70002 70204 H300117-196
2 9/16 3,000-5,000 1 x 6 3/4 H300117-220 H300117-219 H300117-218
2 9/16 10,000 7/8 x 6 1/2 H300117-231 H302256-6 H300117-232
3 1/16 10,000 1 x 7 1/4 70008 70210 H300117-197
3 1/8 3,000 7/8 x 6 1/4 70004 70206 H300117-195
3 1/8 5,000 1 1/8 x 7 1/2 70010 70212 H300117-198
4 1/16 5,000 1 1/4 x 8 1/4 70136 69804 H300117-199
4 1/16 10,000 1 1/8 x 8 1/2 70011 70213 H300117-200
7 1/16 3,000 1 1/8 x 8 1/4 H30017-221 H300117-222 H300117-223
7 1/16 5,000 1 3/8 x 11 140982 h300117-13 H300117-201
7 1/16 10,000 1 1/2 x 11 3/4 70065 70226 H300117-202
9 2,000 1 1/8 x 8 1/4 H300117-221 H300117-222 H300117-223
9 3,000 1 3/8 x 9 1/4 140995 141015G H300117-203
9 5,000 1 5/8 x 12 1/4 70024 70227 H300117-204
9 10,000 1 1/2 x 13 1/2 70150 70179 H300117-205
11 2,000 1 1/4 x 9 70016 70218 H300117-216
11 3,000 1 3/8 x9 3/4 70020 70222 H300117-238
11 5,000 1 7/8 x 14 70026 70230 H300117-207
11 10,000 1 3/4 x 15 1/4 70134 70239 H300117-208
13 5/8 2,000 1 1/4 x 9 1/4 H300117-233 H300117-234 H300117-235
13 5/8 3,000 1 3/8 x 10 1/2 70021 112051G H300117-209
13 5/8 5,000 1 5/8 x 12 3/4 70129 70334 H300117-210
13 5/8 10,000 1 7/8 x 17 3/4 H300117-236 A116830-1 H300117-237
16 3/4 3,000 1 5/8 x 12 H300117-224 H300117-225 H300117-226
16 3/4 5,000 1 7/8 x 14 3/4 70062 70264 H300117-212
16 3/4 10,000 1 7/8 x 17 3/4 H300117-236 A116830-1 H300117-237
20 3/4 3,000 2 x 14 1/2 70027 70231 H300117-215
21 1/4 2,000 1 5/8 x 11 3/4 H300117-227 H300117-228 H300117-229
21 1/4 5,000 2 x 19 141005G 125150 H300117-213
Accessories
Service tools and accessories
-
8/16/2019 Wellhead Data
30/32
30
Corporate overview
Breadth and depth
VetcoGray has been developing industry-leading solutions
for more than a century. Our specialty systems enable superior
performance around the globe – in harsh environments
on land, offshore and subsea. As the oil and gas industry
matures, we provide the knowledge and technologies to
take drilling, completion and production further and deeper
than they have ever gone.
Onshore
Surface wells are drilled and completed in every kind of
environment from desert sand to arctic snow. We provide
expertise and equipment for them all. Our experience
covers production of oil, gas and combinations with other
products such as water, CO2 or H
2S. Our products and
services span the entire range of applications, whether for
simple low-pressure oil wells or the extreme high-pressure/
high-temperature wells now being developed worldwide.
Offshore
Offshore facilities are becoming more diversified as a result
of vast differences in water depths and field characteristics.
We offer an extensive portfolio of proven systems and products
including ixed platorms, jackups and MODUs, TLP/Spars
and FPSOs, and we frequently partner with our customersin offshore field development and exploitation – providing a
full range of industry-leading technologies from drilling and
compression equipment to power-generation modules.
Subsea
With offshore development moving into deeper waters and
marginal fields, more advanced technologies are needed
to increase reliability, flexibility, speed and performance.
Our subsea wellheads and connectors have provided
solid foundations for more than 40 years. We are also at
the forefront of subsea field development, with advanced
systems installed worldwide. Our portfolio also includes
the industry’s latest and most advanced trees, production
controls, manifolds and connections, processing and
distribution systems.
One source,many solutions
30
-
8/16/2019 Wellhead Data
31/32
31
Corporate overview
Strength and stability
As part of GE’s Oil & Gas business, VetcoGray benefits
from the broad strategic and financial stability that enable
strong, long-term investment in and development of new
technologies, tools, services and human resources.
Investment
Our entire organization is committed to investing significant
time and resources in order to deliver greater advantages
to our customers. We invest in new technologies by
researching, developing and testing extensively to
ensure that only the best solutions go to market . We also
invest in regional economies by spreading our research,
manufacturing and service facilities around the world. And,
with our ecomagination program, we invest in the future
of the planet overall – creating solutions that are better for
business and the environment.
Knowledge
Our oil and gas customers are in a unique position tobenefit, not only from our advancements in this industry,
but also from the products and services proven by other
high-tech parts of our organization. Technologies are
regularly modified and injected from our Aviation, Energy,
Healthcare and other businesses to improve machine
performance in oil and gas applications. We also work
very closely with key customer engineering teams, looking
beyond current projects and focusing on future needs.
In our New Technology Introduction (NTI) program, for
example, we meet with customers every quarter for the
sole purpose of brainstorming new ideas – pooling human
and fnancial resources; sharing responsibilities, risks andrewards.
Training
In addition to extensive and demanding training requirements
for our own personnel, we provide a variety of specialized
programs for our customers. Courses range from two-week
modules to a six-month Certificate in Oil & Gas Technologies.
Training methods and course documentation is tailored toeach customer’s specific needs and equipment. We also
provide, multi-customer sessions, computer-based training
and can accommodate programs at customer sites, at our
regional acilities or at our main Learning Center in Florence.
Service
We provide leading inspection, maintenance, repair, spare
parts and upgrade services for every part of an operation,
in every sector of the industry and every region of the
world. GE’s Oil & Gas business has 11 dedicated Global
Services centers and more than 80 manufacturing, sales and
service facilities worldwide. Our crews perform extensive on
site support, plus ongoing design, engineering and a range
of remote monitoring and diagnostic solutions that help
prolong equipment life, reduce costs, and improve performance.
Commitment
Whether they are in drilling and completion, production,
transportation, refining, processing or petrochemicals – we
are fully committed to helping all our customers achieve
greater levels of performance and productivity.
On landand at sea
31
-
8/16/2019 Wellhead Data
32/32
GE Oil & Gas
Headquarters
Via Felice Matteucci 2
50127 Florence Italy
T +39 055 423 211
F +39 055 423 2800
VetcoGray Inc.Headquarters
3010 Briarpark Avenue, Suite 300
Houston, Texas 77042
P.O. Box 2291
Houston, Texas 77252-2291
T +1 713 683 2400
F +1 713 683 2421
For complete contact information,
please refer to our website.
geoilandgas.com/vetcogray
The information contained herein is general in nature
and is not intended for specific construction, installation
or application purposes. GE reserves the right to make
changes in specifications or add improvements at any
time without notice or obligation.
©2008 General Electric Company
All Rights Reserved
GE imagination at work