well stimulation submit disclosure form module 3€¦ · 1. if any form needs to be added, click...
TRANSCRIPT
Page 1
User Reference Guide
Well Stimulation Submit Disclosure Form
Module 3
Page 2
Table of Contents
COURSE OVERVIEW ............................................................................................................................................ 3
COURSE DESCRIPTION ..................................................................................................................................................... 3
1 SUBMIT WELL STIMULATION DISCLOSURE FORM....................................................................................... 4
1.1 SUBMIT A WELL STIMULATION DISCLOSURE FORM ......................................................................................................... 4 1.1.1 Key Points ............................................................................................................................................. 20
Page 3
COURSE OVERVIEW
Course Description This training will describe how well stimulation information is tracked and maintained within the Well Stimulation capability. This includes, but is not limited to, managing alerts to operators, accepting applications and permits for well stimulation, notification of deadlines, recording testing data and the ability to receive documentation related to end of the treatment and post-simulation
Page 4
1 SUBMIT WELL STIMULATION DISCLOSURE FORM In this lesson you will learn how to submit a 72 Hour Notification Form. Lesson Objectives:
• Submit a Well Simulation Disclosure
1.1 Submit a Well Stimulation Disclosure Form
Step Action Required Fields
1. From the Home screen, select Online Forms. 2. In the search bar on the right, type in “Well Stimulation
Disclosure”.
3. Click on the blue hyperlink labeled Well Stimulation Disclosure.
Section 1. Form Information
Page 5
Step Action Required Fields
1. You will be taken to Section 1. Form Information page for Well Stimulation Information. Start by typing in the Organization Name and search for the correct organization for the dropdown.
Organization
2. Select from the available WST Permit # from the dropdown. WST Permit # 3. Enter in a Description for this 72-Hour Notification Form.
NOTE: It is recommended to enter “Well Name/API, Facility Name or Operator” in Description so that this information can also be used to locate the form. Example: Lake View 2 030-12345
Description
4. Click Save & Continue.
Section 2. Operator Information
Page 6
Step Action Required Fields 1. Review organization details for correctness.
Note: changes cannot be made to organization details here.
2. Review contacts responsible for form completion and submission.
3. If the person is not listed on the contacts list, click “Actions”.
4. Click “Add Contact”. 5. Complete contact info dialogue box that appears.
6. Click blue “Update” button. 7. Click “Next”.
Page 7
Section 3. Well Information
Step Action Required Fields 1. Verify all well information: API, Wellbore code, Type of
Stimulation, Lease Well Number, Well status, Well Type, Confidential status, Plug back depth (MD, TVD) Well TD, and initial Production Date, have been auto populated, or filled in correctly.
All required fields are auto populated
2. Verify all location onformation: OffShore/Onshore, Field, County, Section, Township, Range, Base Meridian, Latitude, Longtitude, and confidential status has been auto populated, or filled in correctly.
All required fields are auto populated
3. Select whether this is the most recent information available or if a supplemental form will be submitted after stimulation has been completed.
4. Click Next to move to next section.
Page 8
Section: 4 Treatment Stages
Step Action Required Fields
1. Click the Actions hyperlink within the table to edit an existing stage. Note: The stages will be pre-populated with the information submitted in the Application for Well Stimulation form.
2. Click Actions button and click Create Record to add a new stage, if required.
Page 9
Step Action Required Field 1. Enter information: Stage Number, Stage Start/End
Time/Date, Top (MD TVD), Bottom (MD TVD), Net footage of Perforations, Packer depth (MD TVD), Fracture Geometry (Length, Height, Width, Azimuth), ADSA Dimensions (1x, 2x, 5x Top TVD, Bottom TVD), Geology (Formation, Formation Top (MD TVD) Bottom (MD TVD), Zone 1 2 3 (TVD), Field, Area, Pool code), Slurry Volume, Clean Volume, Proppant Concentration, Rate, Surface Pressure and Bottom hole Pressure.
Stage Number, Stage Start/End Time/Date, Top (MD TVD), Bottom (MD TVD), Fracture Geometry (Length, Height, Width, Azimuth), ADSA Dimensions (1x, 2x, 5x Top TVD, Bottom TVD), Geology (Formation, Formation Top (MD TVD) Bottom (MD TVD), Field, Area, Pool code), Slurry Volume, Clean Volume, Proppant Concentration, Rate, Surface Pressure and Bottom hole Pressure.
2. Click Save. 3. Click Next to move to next section.
Page 10
Section 5 : Base & Recovered Fluids
Step Action Required Fields 1. Click Actions button and click Create Record to add base fluid
information
2. Click the Actions hyperlink within the table to edit an existing entry.
Page 11
Step Action Required Field
1. Check the box if fluid other than water was used. 2. Enter data: Water Source Name, Water Source location, Water
Source Type, Describe Other Water Source, Base Fluid Suitability for Other Uses, Water Source Well ID,Surface Water Diversion Point, Purchased, Supplier Name, Volume Used (bbl), Flashpoint (Celsius), and pH.
Water Source Name, Water Source location, Water Source Type, Describe Other Water Source, Base Fluid Suitability for Other Uses, Surface Water Diversion Point, and Volume Used (bbl).
3. Click Save.
Page 12
Step Action Required Fields
1. Click Actions button and click Create Record to add recovered fluids information
2. Click the Actions hyperlink within the table to edit an existing entry.
Page 13
Step Action Required Field 1. Enter data: Fluid Disposal Method, Location, Description
of other disposal method, UIC Project ID, Volume Recovered at First Sampling (bbl), Total Volume Recovered (bbl), Rad of Recovered Fluid, Radiological Constituent, Rad Analytical Method, and Rad Analysis Equipment.
Fluid Disposal Method, Location, Description of other disposal method, UIC Project ID, Volume Recovered at First Sampling (bbl), Total Volume Recovered (bbl), Rad of Recovered Fluid, Radiological Constituent
2. Click Save.
3. Click Next to move to next section.
Page 14
Section: 6 Constituents & Additives
Step Action Required Fields
1. Click Actions button and click Create Record to add Chemical Constituent information .
2. Click the Actions hyperlink within the table to edit an existing entry.
Page 15
Step Action Required Field 1. Enter data: Stage Number, Chemical name, CAS #, Unique ID
and Concentration % Mass. Note: If no CAS # exists use most identifyable name or number.
Stage Number, Chemical name, CAS # and Concentration % Mass.
2. Click Save.
Page 16
Step Action Required Fields
1. Click Actions button and click Create Record to add base fluid information
2. Click the Actions hyperlink within the table to edit an existing entry.
Page 17
Step Action Required Field
1. Enter Data: Trade Secret Production, Stage Number, Trade Name, Supplier, Intended Purpose, Concentration %, Is Rad Component or Tracer, Rad Recovery Method, Rad Recovery Rate, Rad Material Disposal Method and Rad Material Disposal Location.
Trade Secret Production, Stage Number, Concentration, Is Rad Component or tracer
2. Click Save.
3. Click Next to move to next section.
Page 18
Section 7 Document Upload
Step Action Required Fields 1. Upload any pertaining documents applicable to the Application for
Well Stimulation Permit form.
2. To upload, click Actions then Add New. A popup will expand below. 3. In this popup, input all information. To add the document, select
Browse, search for the correct file and click Upload. Or select Associate Existing WellSTAR Document and select the document ID.
Type, Relevant Date, Description, Document ID
4. Select “Next”.
Page 19
Section 8. Form Submit
Step Action Required Fields 1. If any form needs to be added, click Add Form under Online Form
Association. This creates a popup. Type in the form ID or name and click “Save”.
2. If any comments pertaining to the submittal is needed, type in the comment and click Add under Comments.
3. When ready to acknowledge, click the box label “I hereby certify…”. This autopopulates the user’s name who is filling out the form.
4. Click the button “Preview Submission Summary” to generate the submission.
5. When satisfied with the submission, click “Submit”.
Section 9. Confirmation
Page 20
Step Action Required Fields 1. No action needed. .
1.1.1 Key Points
• Both internal and external users can submit this form.
• All Comments in the submittal and review progress are cataloged and publically available.