welcome to the most recent edition of the harnois catalog ... · welcome to the most recent edition...

Welcome to the most recent edition of the HARNOIS catalog! One of a handful of greenhouse manufacturers offering such a complete range of greenhouse equipment and accessories under one roof, HARNOIS stands apart with unparalleled and competent service, delivered by a savvy and dedicated team of experts.

CATALOG NAVIGATION GUIDE

Here’s what to expect when you flip the pages of the catalog:

1- Click on the bookmark icon to activate the bookmark side bar or on page view icon to switch to the pages side bar

2- Bookmark side bar 3- Search window (to activate, simultaneously press on CTRL and the F key on your keyboard)

The catalog is divided in sections, each identified by a title. If you are unsure where the information you are looking for is located, activate the search window as described in point 3 above. Type a keyword, such as heating. The window will automatically indicate the number of occurrences for this keyword in the catalog. Then click on the little arrows and to navigate through these occurrences. Not finding what you are looking for? Our catalog only presents a

portion of the products we sell. Call one of our sales representatives to find out if we carry what you are looking for!

Some pages are designed to provide additional technical information. They appear as a blue link in the bookmark side bar.

These pages contain useful information, designed to help you select the best item to suit your needs.

At any time, we invite you to contact our sales representatives who will be able to guide you through this catalog and advise you on the products offered.

Toll free (in Canada and USA): 1-800-427-6647 (1-800-HARNOIS)

Elsewhere: 01-450-756-1041

By email: [email protected]

Thank you for shopping at Harnois! Harnois reserves the right to modify its product range at any time and without notice. Certain items might not be available in certain regions. A minimum order amount might be required to process overseas orders. Illustrations in this catalog may differ from the product supplied. Harnois holds no responsibility regarding the availability in stock of the items shown in this catalog. Call our representatives to enquire about availability of specific items.

Catalog sections

Section Content

ABC

Structure accessoriesDGreenhouse coveringEGreenhouse climateFMicro-irrigationGGrowing equipmentsHInstrumentsI

JPumps & accessoriesKAluminum pipes & fittingsLPoly. & galvanized fittingsMSprinklersNValvesOTimers & controllersP

QFiltration & fertilizationR

STUVWXYZ

2018-05-11 Page 1 / 1

DStructure accessories

Page Page title

14 Anti-rust protection

7 Blower

6 Blower parts

20 Bolting

21 Cable & cable clamp

11 Greenhouse accessories

10 Greenhouse door

1 Inflating kit

3 Inflating kit accessories

23 Turnbuckle

2018-05-14 Page 1 / 1

Inflating kit

Date effective: 2015-06-01Section: D 1

CodeDescription Unit.

Inflating blower for double polyethyleneInflating kit for outside installation (where outside humidity is lower than inside greenhouse humidity) to prevent condensation between the two covering films. Frame and protector in galvanized steel, plate for adjustment of flow. Frame with styrofoam insulation, fit on 1-1/4" purlin. Including adjustable blower on isolated frame with 4.75" diameter tee outlet, 2 films adapters and 20' of 4.75" diameter poly tube.

2L200-1CHINFLATING KIT MODEL 2002L300-1CHINFLATING KIT MODEL 300


Central blower for double poly (Canada)Central blower with a capacity of 2300 cfm (3907m3/h).

Can accommodate an area of 115,000 square feet (1.1 hectare) of greenhouse. The system consists of a tubular fan with a power of 1/3 HP (0.25kW). The distribution is done in a 10" (0.245m) diameter line in galvanized steel. System is provided with a pressure sensor and a controller providing a constant pressure in the system. There are 3 possible settings: 0.13, 0.14 and 0.15" of water (32, 34 or 37 Pascals).

3L2300-CANCHPOLY BLOWER 2300 CFM3L9900CHVERTICAL DIST. BLOWER

3L9905PLSHORIZONTALE DIST. BLOWER

2015-06-02Page 1 / 2

Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0Tel.: 450-756-1041 1-888-HARNOIS fax 450-756-8389 www.harnois.com

Edition

Inflating kit



Central blower for double poly (Mexico)Central blower with a capacity of 2300 cfm (3907m3/h).

Can accommodate an area of 115,000 square feet (1.1 hectare) of greenhouse. The system consists of a tubular fan with a power of 1/3 HP (0.25kW). The distribution is done in a 10" (0.245m) diameter line in galvanized steel. System is provided with a pressure sensor and a controller providing a constant pressure in the system. There are 3 possible settings: 0.13, 0.14 and 0.15" of water (32, 34 or 37 Pascals).

3L2300CHPOLY BLOWER 2300 CFM

2015-06-02Page 2 / 2


Edition

Section:Date effective:

D 1A

2015-06-01

Soufflerie pour polyéthylène double Double polyethylene inflating kit

SOUFFLERIE BLOWER 2L200-1 2L300-1

3L2300 3L2300-CAN

Pcm à 0.2" / Cfm at 0.2" 131 450 2300

M3/h à 49 (Pascal) 222 764 3900

Volts 115 VAC 115 VAC 208/480

Phases 1 1 3

Amps 0.65 1.35 2.6 / 1.2

Hertz 60/50 60/50 60/50

RPM 2880 1640 0-1725

Surface de serre (pi.ca.) Surface of greenhouse (sq.ft) 0–4000 4000–15000 115000

Surface de serre (hectare) Surface of greenhouse (hectare) 0–0.037 0.037–0.1393 1.1

Prévoir 0.03 PCM/pi.ca. de plancher de structure, peu importe la structure (Ovaltech, Nordique, etc.) Calculate 0.03 CFM/sq.ft of floor surface for any type of structures (Ovaltech, Nordique, etc.) Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2015-06-01

Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 1/1 U:\Catalogue PDF\D-01A.doc

Inflating kit accessories



Plastic blower adapter4" tube adapter for polyethylene film (plastic).

1L010-1CH4" TUBE ADAPTOR FOR POLY FILM3AT10CH2 INFL.ADAPT.+(5') 4-3/4" TUBE


Transfer kit1-1/4"diameter polypropylene tube for films that transfers air from one space to another. Ideal for the transfer of air from roof to the walls using the same blower.

8E020CH1-1/4"PLASTIC FLANGE ADAPTOR

8E021PLSPLASTIC TUBE 1-1/4"


Inflation tube

2L013CH4.75"DIA X 20' AIR INFLAT.TUBE


Flexible inflation tube

8E105CHFLEXIBLE ALUM.CONDUCT 4"X 50'

2014-07-08Page 1 / 3


Edition



8E107CHFLEXIBLE ALUM.CONDUCT 4"X 12'8E108CHFLEXIBLE ALUM.CONDUCT 4"X 25'


Inflation regulatorAir pressure regulator, with counterweight, lets evacuate the extra air between covering films, thus maintaining the optimal pressure at 0.15" of water column. This regulator is highly recommanded for natural ventilation where the air volume varies with the rolling of the films or their height. Each kit includes a pressure regulator, 1 galvanized mounting plate, 1 adjustable galvanized 90 degrees 4" elbow, 10' of polyethylene 4.75" diameter and one 4"diameter galvanized adapter for polyethylene film.

2A6815CHAIR DAMPER


Dwyer manometerManometer shows static pressure between two layers of film. Recommended static pressure is between 0.15" and 0.20" of water column. Suggested pressure for heating tube is 0.13".

8C160CHMANOMETER "DWYER" MARK II


Pipe

8E044CHCONDUIT 4" X 60" 30GA #441128E045CHCOND.4" X 36" 30GA #440113

8E046CHTEE 4"X 4"X 4" #466038

8E047CHCOND.14" X 60" 28GA #4413018E048CHCAP GALV 14" #467202

2014-07-08Page 2 / 3


Edition



8E527CHCAP GALV 10" #467202


Speed control

8HC56CHSPEED CONTROLER MOMO

2014-07-08Page 3 / 3


Edition

Blower parts



Blower with motorBlower with motor for replacement.

8J1TDP5CHBLOWER NEW 200PC8J1TDR7CHBLOWER 115V 60HZ 300PC


Motor for blowerReplacement motor for blower.Blower 8J3M777 8J3M778HP 1/30 1/20Screw 2 4RPM 3000 1550Volts 115 115Amps 1.2 1.8

8J3M777CHREPLAC. MOTOR FOR 200PC (4K8508J3M778CHREPLAC.MOTOR FOR 200PC (3M082)

2014-03-13Page 1 / 1


Edition

Blower



Blower

8JVTX600CHBLOWER VORTEX 452 CFM8JVTX800CHBLOWER VORTEX 747 CFM

2014-01-29Page 1 / 1


Edition

Section:

Date effective:

D 7A

2014-09-17

Soufflerie Blower

Graphique de performance Air performance graph

8JVTX600

Pre

ssio

n st

atiq

ue (H

2O)

Stat

ic p

ress

ure

(in H

2O)

452 PCM/CFM

Débit (PCM) / Flow rate (CFM)

À 0 pression statique / At 0 static pressure

8JVTX800

Pre

ssio

n st

atiq

ue (H

2O)

Stat

ic p

ress

ure

(in H

2O)

747 PCM/CFM

Débit (PCM) / Flow rate (CFM)

À 0 pression statique / At 0 static pressure

Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-09-17

Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 1/1 U:\Catalogue PDF\D-07A.doc

Greenhouse door



On hinges for steel endGalvanized steel greenhouse doors. Hinge doors for steel greenhouse structure. Can be covered with triple polycarbonate only. Ideal for greenhouse partition walls. Each door kit includes door seal, lock, hinges. Covering accessories for triple polycarbonate included.

3F310CH48"X98"H SING HING DOOR ST G-E

3F320CH96"X98"H DBL HING DOOR ST G-E3F328CH96"X90"H DBL HING DOOR ST G-E


Sliding door for steel endGalvanized steel greenhouse doors. Sliding doors for steel greenhouse structure. Can be covered with triple polycarbonate only. Ideal for greenhouse partition walls. Each door kit includes attachments, guides and lock. Covering accessories for triple polycarbonate included.

3F210CH48"X98" SING SLID DOOR ST G-E3F214CH72"X98" SING SLID DOOR ST G-E

3F216CH72"X142" SING SLID DOOR ST G-E3F220CH96"X98"H DBL SLID DOOR ST G-E

3F222CH120"X122"H DBL SLID DOOR ST GE

3F224CH144"X98"H DBL SLID DOOR ST G-E3F228CH96"X90"H DBL SLID DOOR ST G-E

2014-04-17Page 1 / 5


Edition

Greenhouse door



On hinges for wood endGalvanized steel greenhouse doors. Hinge doors for wood greenhouse structure. Can be covered with triple polycarbonate only. Ideal for greenhouse partition walls. Each door kit includes door seal, lock, hinges. Covering accessories for triple polycarbonate included.

3F311CH48"X98"H SING HING DOOR W G-EN

3F321CH96"X98"H DBL HING DOOR W G-END


Sliding door for wood endGalvanized steel greenhouse doors. Sliding doors for wood greenhouse structure. Can be covered with triple polycarbonate only. Ideal for greenhouse partition walls. Each door kit includes attachments, guides and lock. Covering accessories for triple polycarbonate included.

3F221CH96"X98"H DBL SLID DOOR W G-END3F223CH120"X122"H DBL SLID DOOR W G-E3F229CH96"X90"H DBL SLID DOOR W G-END


Curtain doorFOLD-UP curtain door, horizontal operation, including: 0.011" heavy duty polyethylene tarp (1 year warranty, life expectancy from 3 to 5 years depending use), cables, frame, hardware. Motorization or handcrank not included.

3F351CH10'W X 9'HT CURTAIN DOOR ST-FR

3F352CH12'W X 9'HT CURTAIN DOOR ST-FR

3F353CH12'W X 10'H CURTAIN DOOR ST-FR3F354CH14'W X 10'H CURTAIN DOOR ST-FR

2014-04-17Page 2 / 5


Edition

Greenhouse door



Hand crankOperating system for curtain door.

3F020CHHANDCRANK FOR CURTAIN DOOR


Door for cold framePolyethylene covering

3F330CH48"X90"H SIN HINGE DOOR TUNNEL3F331CH96"X90"H DBL HINGE DOOR 20-TUN


Doors & accessories1J160 ==> Inside openingOverall dimension box: 35-3/8" x 82-3/8" insulated door R-12Door only: 33-3/4" x 79-1/4"

1J159CHPORTE SERV34x80 BARRE PANIQUE1J160CHSTEEL DOOR 34" X 80"

1J161CHDOOR HANDLE (WITH KEY)1J163CHDOOR HANDLE LEVER ACTION1J167CHGRAB HANDLE BLACK

1J168CHMAGNET 3 3/16" X 13/16"X 3/4"

2014-04-17Page 3 / 5


Edition

Greenhouse door



Door with handleAssembled steel door- Required size opening: 40" x 86"- Steel HC 20GA FL 3'X7' BRP MDR- Hinge FBB191 4.5X4 C26DFNA- Door closer 1430 PS TB- Welded frame 16GA 5 7/8 3'X 7'- SSA ASA FP PAR MDR- Knob 533F C32D- Safety latch 2100 SB- Weatherstrip- All assembled

1J165CHDOOR 3'X 7' + HANDLE & PANIC B


Door without handleAssembled steel door without handle and ketch- Required size opening: 40" x 86"- Steel HC 20GA FL 3'X7' BRP MDR- Hinge FBB191 4.5X4 C26DFNA- Door closer 1430 PS TB- Welded frame 16GA 5 7/8" 3'X7'- SSA ASA FP PAR MDR- Safety latch 2100 SB- Weatherstrip- With sill all assembled

1J166CHDOOR 3'X 7' PANIC B_ NO HANDLE

2014-04-17Page 4 / 5


Edition

Greenhouse door



Door opening accessoriesCovering accessories for door opening.

3F270CHPCSS OPENING CONTOUR FINISH3F275CHCORRUG OPENING CONTOUR FINISH

3F280CHPOLY OPENING CONTOUR FINISH


Framing

3F285CHRETRO 8'x 8' DOOR FRAMING

3F290CHRETRO 10'X10' DOOR FRAMING3F295CHRETRO 12'X12' DOOR FRAMING3F299CHRETRO DOOR SERVICE FRAMING

2014-04-17Page 5 / 5


Edition

Greenhouse accessories



Crosstie stiffenerSmall steel plate being use of reinforcement to the crop support and can be added to the existing greenhouses. Fix to the support holding crossties; each set of plates added allows to support 300 lbs of additional load.

00056-000-1CHPLATE 3/4 x 2-1/4 14Ga

2013-12-17Page 1 / 1


Edition

Anti-rust protection



Zinc paintAnti-rust coating with very high zinc content.

1P1076-1CHZINC SPRAY WEICON 400ML 500HR


Anti-rust paintAnti-rust paint.

RP09CHSIERRAS37 METALMAX 3.78 L WTRP10CHSIERRA S37 METALMAX 3.78L.GRIS

RP100CHANTI-CORROSION PRIMER 3.78 L.

2015-06-18Page 1 / 1


Edition

Bolting



Eye bolt

1C0014CHEYE BOLT 5/8"x 1 3/4"1C0015CHEYE BOLT 5/8"x 4"

1C2927CHEYE BOLT 1/4" X 3" FULL THREAD

1C2928CHEYE BOLT 1/4" X 4" FULL THREAD1C2929CHEYE BOLT 1/4" X 5"

1C2939CHEYE BOLT 5/16" X 2-3/8" PLT

1C2940CHEYE BOLT 5/16" X 4" PLT1C2942-1CH5/16"X 6" EYE BOLT

1C2950CHEYE BOLT 3/8" X 4"

1C2951CHEYE BOLT 3/8" X 5" PL 1.065"ID


Carriage bolt - G5Grade 5 carriage bolt with Ultraseal coating.

1C0002CHCAR BOLT 1/4" X 1" G5 PLT

1C0003CHCAR BOLT 1/4" X 1-1/4"G5 PLT1C0004CHCAR BOLT 1/4" X 1-1/2"G5 PLT1C0004-1CHCAR.BOLT 1/4" X 1-3/4" PLT GR5


1C0006CHCAR BOLT 1/4" X 2-1/4"G5 PLT1C0007CHCAR BOLT 1/4" X 2-1/2"G5 PLT

1C0008CHCAR BOLT 1/4" X 3" G5 PLT1C0009CHCAR BOLT 1/4" X 3-1/4"G5 PLT1C0010CHCAR BOLT 1/4" X 3-1/2"G5 PLT


1C0012CHCAR BOLT 1/4" X 4-1/2"G5 PLT1C0013CHCAR BOLT 1/4" X 5" G5 PLT

2015-06-17Page 1 / 15


Edition

Bolting


1C0020CHCAR BOLT 5/16" X 3/4" G5 PLD1C0021CHCAR BOLT 5/16" X 1" G5 PLT1C0022CHCAR BOLT 5/16" X 1-1/4" PLT G5

1C0023CHCAR BOLT 5/16" X 1-1/2" G5 PLT1C0024CHCAR BOLT 5/16" X 2" G5 PLT

1C0025CHCAR BOLT 5/16"X 2-1/4"G5 PLT

1C0026CHCAR BOLT 5/16"X 2-1/2"G5 PLT1C0027CHCAR BOLT 5/16" X 3" G5 PLT1C0028CHCAR BOLT 5/16" X 2-3/4" G5 PLT

1C0029CHCAR BOLT 5/16"X 3-1/2"G5 PLT1C0030CHCAR BOLT 5/16" X 4" G5 PLT

1C0031CHCAR BOLT 5/16"X 4-1/2"G5 PLT

1C0032CHCAR BOLT 5/16" X 5" G5 PLT1C0033CHCAR BOLT 5/16" X 5 1/2" G5 PLT1C0034CHCAR BOLT 5/16" X 6" G5 PLT1C0041CHCAR BOLT 3/8" X 1" G5 PLT


1C0044-1CHCAR. BOLT 3/8" X 2-1/4" G5 PLT1C0046CHCAR BOLT 3/8" X 2-1/2"G5 PLT

1C0047CHCAR BOLT 3/8" X 3" G5 PLT1C0048CHCAR BOLT 3/8" X 3" G5 PLT1C0049CHCAR BOLT 3/8" X 3-1/2"G5 PLT


1C0051CHCAR BOLT 3/8" X 4 1/2" G5 PLT1C0504-1CHCAR. BOLT 1/4" X 1-3/4"G5 PLT


Black carriage bolt - G5

1C0024-NRCHCAR BOLT 5/16" X 2" G5 BLACK

1C0027-NRCHCAR BOLT 5/16" X 3" G5 BLACK1C0051-NRCHCAR BOLT 3/8"X 4 1/2"G5 BLACK

2015-06-17Page 2 / 15


Edition

Bolting



Hexagon bolt - G5Hexagone bolt, grade 5, with Ultraseal coating.

1C0200CHHEX BOLT 1/4" X 1/2" G5 PLT1C0200-1CHHEX BOLT 1/4" X 5/8" G5 PLT

1C0201CHHEX BOLT 1/4" X 3/4" G5 PLT

1C0202CHHEX BOLT 1/4" X 1" G5 PLT1C0203CHHEX BOLT 1/4" X 1-1/4"G5 PLT

1C0204CHHEX BOLT 1/4" X 1-1/2"G5 PLT

1C0205CHHEX BOLT 1/4" X 2" G5 PLT1C0206CHHEX BOLT 1/4" X 2-1/4" G5 PLT

1C0207CHHEX BOLT 1/4" X 2-1/2"G5 PLT

1C0208-1CHHEX BOLT 1/4" X 3-1/4" G5 PLT1C0209CHHEX BOLT 1/4" X 3-1/2"G5 PLT

1C0210CHHEX BOLT 1/4" X 4" G5 PLT

1C0211CHHEX BOLT 1/4" X 4-1/2"G5 PLT1C0212CHHEX BOLT 1/4" X 5" G5 PLT

1C0213CHHEX BOLT 1/4" X 5 1/2" G5 PLT

1C0217CHHEX BOLT 1/2" X 5-1/2" GR5 PLT1C0608CHHEX BOLT 1/4" X 3" G5 PLT

1C0620CHHEX BOLT 5/16" X 3/4" G5 PLT


1C0623CHHEX BOLT 5/16" X 1-1/2" G5 PLT1C0624CHHEX BOLT 5/16" X 2" G5 PLT

1C0625CHHEX BOLT 5/16" X 2-1/4" G5 PLT

1C0626CHHEX BOLT 5/16" X 2-1/2" G5 PLT1C0626-1CHHEX BOLT 5/16" X 2-3/4" G5 PLT1C0627CHHEX BOLT 5/16" X 3" G5 PLT



1C0632CHHEX BOLT 5/16" X 5" G5 PLT1C0633CHHEX BOLT 5/16" X 6" G5 PLT1C0640CHHEX BOLT 3/8" X 3/4" G5 PLT

2015-06-17Page 3 / 15


Edition

Bolting


1C0641CHHEX BOLT 3/8" X 1" G5 PLT1C0642CHHEX BOLT 3/8" X 1-1/4" G5 PLT1C0643CHHEX BOLT 3/8" X 1-1/2" G5 PLT



1C0649CHHEX BOLT 3/8" X 3-1/2" G5 PLT1C0650CHHEX BOLT 3/8" X 4" G5 PLT1C0651CHHEX BOLT 3/8" X 4-1/2" G5 PLT

1C0652CHHEX BOLT 3/8" X 5" G5 PLT1C0652DCHHEX BOLT 3/8" X 5-1/2"G5 PLT


1C0654CHHEX BOLT 3/8" X 6-1/2" G5 PLT1C0654ACHHEX BOLT 3/8" X 7" G5 PLT1C0655CHHEX BOLT 3/8" X 8" G5 PLQ1C0656CHHEX BOLT 3/8" X 8 1/2" GR5 PLQ

1C0657CHHEX BOLT 3/8" X 7 1/2" GR5 PL

1C0658CHHEX BOLT 3/8" X 9" G5 PLT1C0659CHHEX BOLT 3/8" X 11" G5

1C0661CHHEX BOLT 7/16" X 1" G5 PLT1C0663CHHEX BOLT 7/16" X 1-1/2" G5 PLT1C0664CHHEX BOLT 7/16" X 2" G5 PLT



1C0670CHHEX BOLT 7/16" X 4" G5 PLT1C0671CHHEX BOLT 7/16" X 4-1/2" G5 PLT1C0672CHHEX BOLT 7/16" X 5" G5 PLT



1C0679CHHEX BOLT 7/16" X 9" G5 PLT1C0680CHHEX BOLT 7/16" X 9 1/2" G5 PLT






2015-06-17Page 4 / 15


Edition

Bolting


1C0691CHHEX BOLT 1/2" X 4-1/2" G5 PLT1C0692CHHEX BOLT 1/2" X 5" G5 PLT1C0693CHHEX BOLT 1/2" X 6" G5 PLT

1C0694CHHEX BOLT 1/2" X 6 1/2" G5 PLT1C0695CHHEX BOLT 1/2" X 7" G5 PLT


1C0703CHHEX BOLT 5/8" X 1-1/2" G5 PLT1C0704CHHEX BOLT 5/8" X 2" G5 PLT1C0706CHHEX BOLT 5/8" X 2-1/2" G5 PLT



1C0711CHHEX BOLT 5/8" X 4-1/2" G5 PLT1C0712CHHEX BOLT 5/8" X 5" G5 PLT1C0713CHHEX BOLT 5/8" X 5-1/2" G5 PLT1C0714CHHEX BOLT 5/8" X 6" G5 PLT



1C0727CHHEX BOLT 3/4" X 3" G5 PLT1C0731CHHEX BOLT 3/4" X 4-1/2" G5 PLT1C0732CHHEX BOLT 3/4" X 5-1/2" G5 PLT

1C0746CHHEX BOLT 1" X 2-1/2" G5 PLT

1C0747CHHEX BOLT 1" X 3" G5 PLT


Hexagon bolt - G8Hexagone bolt, grade 8, with Ultraseal coating.

1C0744CHHEX BOLT 3/4" X 14" G8 PLT1C0751CHHEX BOLT 1" X 5" G8 PLT

2015-06-17Page 5 / 15


Edition

Bolting



"U" bolt"U" bolt, round or square shape.

1CE1608CH"U" BOLT 1"1CE1609CH"U"BOLT 7/16-14 X 7 X 3-1/16

1CE1610CHBENT U BOLT 2 1/4" x 4 1/2"

1CE3213CH"U" BOLT 2"1CE3401CH"U" BOLT 2-1/8"

1CE4816CH"U" BOLT 3"

1CE4817CHU BOLT 5/16"-18 2 7/8"x 5 3/4"1CE4818CH"U" BOLT 1 1/2"

1CF2212CH"U" BOLT 1-1/4" GRADE 5

1CF3015CH"U" BOLT 1-3/4" GR51CF3813CH"U" BOLT FOR SADDLE 2-1/4"

1CT1600CHSQUARE "U" BOLT 1" GR5

1CT1707-1CHSQUARE "U" BOLT 1-1/4"1CT2810CHSQUARE "U" BOLT 2-3/4"

1CT4000CHSQUARE "U" BOLT 2-1/2"X 2"


HD "U" bolt

1CE3401-HDCHUBOLT 2 1/8" HD1CE4817-HDCHUBOLT 2 3/4" HOT DIP

1CF3015-HDCHUBOLT 1 3/4" GR 5 HOT DIP

2015-06-17Page 6 / 15


Edition

Bolting



SaddleSaddle for "U" bolt.

1CV1606CHSADDLE 1"1CV2606CHSADDLE 1-1/4"

1CV3506CHSADDLE 1-3/4"

1CV3506-HDCHSADDLE 1 3/4" HD1CV3806CHSADDLE 2-1/4"

1CV3905CHSADDLE 2"

1CV3905-HDCHSADDLE 2" HD1CV5106CHSADDLE 2-3/4" 3-1/4"c/c

1CV5106-HDCHSADDLE 2 3/4" HD

1CV5107CHSADDLE 3" PLATED1CV5108CHSADDLE 3" FOR 7/16" U-BOLT

1CV5108-GVCHSADDLE 3"BLACK FOR U-BOLT 7/16

1CV5109CHSADDLE 1 1/2 FOR U BOLT 5/16"


Hexagon nut

1C0787CHHEX NUT 5/16" PLATED

1C0788CHHEX NUT 3/8" PLATED

1C0789CHHEX NUT 7/16" PLATED1C0790CHHEX NUT 1/2" PLATED

1C07901CHHEX NUT 9/16" PLATED1C0791CHHEX NUT 5/8" PLATED1C0792CHHEX NUT 3/4" PLATED

1C0793CHHEX NUT 1" PLATED

1C0800CHSELF THREADING HEX NUT 1/4"

2015-06-17Page 7 / 15


Edition

Bolting



Black hexagon nut

1C0791-NCHHEX NUT (2H) 5/8" BLACK1C0794-NCHHEX NUT 7/8" BARE


HD hexagon nut

1C0791-HDCHHEX NUT 5/8" HOT DIP

1C0792-HDCHHEX NUT 3/4" HOT DIP

1C0793-HDCHHEX NUT 1" HOT DIP


Various nuts

1C0792-GCHHEX NUT 3/4" PLATED

1C4210CHT-NUTS 1/4" GALV


Hexagon flanged nut

2015-06-17Page 8 / 15


Edition

Bolting


1CB786CHHEX FLANGED NUT 1/4" PLATED1CB787CHHEX FLANGED NUT 5/16" PLATED1CB788CHHEX FLANGED NUT 3/8" PLATED

1CB789CHHEX FLANGED NUT 7/16" PLATED1CB790CHHEX FLANGED NUT 1/2" PLATED


HD hex. flanged nut

1CB786-HDCHHEX FLANGED NUT 1/4" HOT DIP

1CB787-HDCHHEX FLANGED NUT 5/16"HOT DIP1CB788-HDCHHEX FLANGED NUT 3/8" HOT DIP

1CB789-HDCHHEX FLANGED NUT 7/16"HOT DIP

1CB790-HDCHHEX FLANGED NUT 1/2"HOT DIP


SS hex. flanged nut

1CB786-SSCHHEX FLANGED NUT 1/4" ST.STEEL

1CB787-SSCHHEX FLANGED NUT 5/16" ST.STEEL1CB788-SSCHHEX FLANGED NUT 3/8" ST.STEEL1CB789-SSCHHEX FLANGED NUT 1/2" ST.STEEL

1CB790-SSCHHEX FLANGED NUT 1/2" ST.STEEL


Lagstud nut

2015-06-17Page 9 / 15


Edition

Bolting


1C2531CHLAGSTUD NUT 1 IN PLT1C2533CHLAGSTUD NUT 3/4" PLT1C2536CHNUT LAGSTUD 1-1/4"


GV lagstud nut

1C2531-GVCH1" NUT LAGSTUD1C2533-GVCH3/4" LAGSTUD NUT

1C2536-GVCHNUT 1-1/4" LAGSTUD


Coupling nut

1C3151CHCOUPLING NUT 5/16-18 x 1-1/21C3153CHCOUPLING NUT 3/8-16 x 1-3/4


Washer

1C0375CHFLAT WASHER 1"BLT SIZE PLT

1C0379CHWASHER PLT 3/16H

1C0380CHFLAT WASHER 1/4"BOLT SIZ.PLT1C0381CHFLAT WASHER 5/16"BLT SIZ.PLT

1C0382CHFLAT WASHER 3/8"BLT SIZE PLT1C0383CHFLAT WASHER 7/16"BLT SIZ.PLT

1C0384CHFLAT WASHER 1/2"BLT SIZE PLT

2015-06-17Page 10 / 15


Edition

Bolting


1C03841CHFLAT WASHER 9/16"BLT SIZ.PLT1C0385CHFLAT WASHER 5/8"BLT SIZE PLT1C0386CHFLAT WASHER 3/4" BOLT SIZE

1C0387CHFLAT WASH.1/2"ID 1-1/4"OD PLT1C0388CHFLAT WASHER 7/32"ID 1"OD PLT

1C0389CHFLT WASH.5/16"ID 1-1/2"OD PL

1C0390CHLOCK WASHER 1/4" PLT1C0391CHLOCK WASHER 5/16" PLT1C0392CHLOCK WASHER 3/8" PLT

1C0393CHLOCK WASHER 7/16" PLT1C0394CHLOCK WASHER 1/2" PLT

1C0395CHLOCK WASHER 5/8" PLT

1C0396CHLOCK WASHER 3/4" PLT1C0398CHLOCK WASHER 1" PLT1C0399CHLOCK WASHER 1 1/4" PLATED1C2083-SCHWASHER NEO 1/4" X5/8"STAINLESS


Black washer

1C0384-NRCHFLAT WASHER 1/2"BLT SIZE BLACK

1C0387-NRCHFLAT WASH.1/2"ID 1-1/4"OD BLCK

1C0394-NRCHLOCK WASHER 1/2" BLACK


HD washer

1C0386-HDCHFLAT WASHER 3/4"BOLT SIZE H.DI

1C0396-HDCHLOCK WASHER 3/4" HOT DIP

2015-06-17Page 11 / 15


Edition

Bolting



SS washer

1C0375-SSCHFLAT WASHER 1"BLT SIZE ST.STEE1C0394-SSCHLOCK WASHER 1/2" S.STEEL

1C0396-SSCHLOCK WASHER 3/4" SS

1C0398-SSCHLOCK WASHER 1" PLT ST.STEEL


Various washers

1C0388-BBCHFLAT WASHER .196"ID X 1"OD BB1C0393SCHSTAR WASHER INSIDE SS 12mm1C4305CH"T" WASHER 3/8"1C4305-GVCH"T" WASHER 3/8"


Lag screw

1C2505CHWOOD SCREW 1/4"X 3-1/2" PLATED

1C2506CHWOOD SCREW 1/4"X 4" PLT U-SEAL

1C2507CHWOOD SCREW 5/16"X 3" PLT1C2515CHWOOD SCREW 3/8"X 4" PLT

1C2516CHWOOD SCREW 1/2"X5" PLT1C2517CHWOOD SCREW 5/8"X6" Zinc Nickel

1C2518CHWOOD SCREW 5/8"X 8" H.DIP.GALV

2015-06-17Page 12 / 15


Edition

Bolting



Anchor

1P027CH1/2" HDI ANCHOR1P031CHANCOR HILTI SVA 5/16X 1-5/8"

1P035CH3/8" HDI ANCHOR

1P1010CHQUICK BOLT 3/8"X 3" INOX.1P1025-CCHTHREADED ROD 3/4" X 10"

1P1027CHQUICK BOLT 3/8" X 5" PLQ.

1P1027-SSCHQUICK BOLT 3/8" X 5" ST.STEEL1P1028CHQUICK BOLT 1/2" X 5-1/2" PLQ.

1P1028-HDCHQUICK BOLT 1/2"X 5-1/2"HOT DIP

1P1031CH5/8" X 5" WEDGE BOLT ANCHOR1P1032CH5/8" WEDGE BIT TYPE SDS PLUS

1P1033CH3/4" X 6" WEDGE BOLT ANCHOR

1P1034CH3/4" WEDGE BIT TYPE SDS PLUS1P1037CHQUICK BOLT 5/8" X 6" PLQ.

1P1037-HDCHQUICK BOLT 5/8" X 6" HOT DIP

1P1038-BCHTHREADED ROD 5/8" X 7 1/2"1P1038-SSCHTHREADED ROD 5/8" X 7 1/2"SS

1P1039CHQUICK BOLT 3/8" X 3" PLQ.

1P1044CH3/4" X 7" EXPANSION ANCHOR KB31P1045CHMECANICAL ANCHOR KB3 3/4" X 8"

1P1045ACHMEC. ANCHOR 3/4" X 8 1/2"1P1049-MCHPYLEX-L MODIFIED ANCHOR

1P1054CHQUICK BOLT 5/8" X 5 PLT.

1P1054-HDCHQUICK BOLT 5/8"X 4 3/4 HOT DIP1P1054-SSCHQUICK BOLT 5/8" X 4 3/4 ST.STE1P1064CHANCHOR HVU/HAS-E 5/8" X 12"

1P1067CHANCHOR HVU/HAS-E 1-1/4" X 16"1P119CH5/8" X 7-5/8" S.S. ANCHOR

2015-06-17Page 13 / 15


Edition

Bolting



Wood hook

1C2978CHWOOD SCREW HOOK


Metal screwSelf-tappping and self-drilling screw.

1C2204CHSELF TAP SCREW RND HEAD #6X3/81C2206CHSELF DRL.SCREW RND HEAD#8X1/2"

1C2207CHSELF DRL.SCREW RND HEAD#10X3/4

1C2209CHPAN HEAD TAP.SCREW #8 X 3/4"1C2210CHSELF TAP.SCREW RND HEAD#8X1/2"1C2212CHSELF TAP.SCREW HEX #10 X 5/8"1C2213CHSELF DRL. SCREW HEX #8 X 3/4"

1C2214CHSELF TAP.SCREW HEX #12X1/2"S.S

1C2220CHSELF DRL SCREW HEX #10 X 1/2"1C2229CHSELF DRL SCREW HEX #10 X 3/4"

1C2230CHSELF DRL SCREW HEX #12 X 1"1C2231CHSELF DRIL SCREW HEX 12X 1 1/2"1C2246CHSELF DRL SCREW #14X7/8"LAPTECK

1C2247CHSELF DRL SCREW HEX #14 X 1"

1C2248CHSELF DRL SCREW HEX #14 X1-1/2"1C2249CHSELF DRL SCREW HEX #14 X 2"

1C2252-BCHSELF DRL SCR#14X7/8"LAPTECK WT1C2315CHSELF DRL SCREW RND HEAD#8 X 1"1C2325CHSELF DRL SCREW #10 x 13/16" FL

1C2330CHSELF DR SCREW #12 x 2" FLAT.H

1C2331CH#12-24 X 3" SELF DRILL SCREW1C2333CH#12-24 X 4" SELF DRILL SCREW

2015-06-17Page 14 / 15


Edition

Bolting



Magnetic bit

1C2200CHMAGNETIC HEX BIT 5/16"1C2202CHMAGNETIC HEX. BIT 3/8"


Square insert bit

1C2201CHN0.2 SQUARE INSERT BIT

1C2205CHN0.3 SQUARE INSERT BIT 3"

2015-06-17Page 15 / 15


Edition

Cable & cable clamp



Coated cable

1N0103PLSWIRE 3/32"(7X7)COATED 3/16"1N0104PLSWIRE 1/8"(7X7)COATED 3/16"


Steel cable

1N0201PLSGV STEEL WIRE 1/16" 1X19


1N0203PLSGV ST.WIRE 3/16"X 7X71N0206PLSGV STEEL WIRE 3/8" 7 X 191N0207PLSGV STEEL WIRE 1/4" 7 X 191N0209PLSGV STEEL WIRE 1/2" 6 X 36


Stainless steel cable

1N0201-SSPLSSTEEL WIRE 1/16" 7 X 7 S.STEEL

1N0202-SSPLSSTAINLESS STEEL WIRE 1/8" 7X

1N0203-SSPLSST.WIRE 3/16"X 7X7 ST.STEEL1N0206-SSPLSST.STEEL WIRE 3/8" 7 X 19

1N020722SSCHS.STEEL CABLE 3/8" X 25"1N020732SSCHCABLE 1/4" S.S.X 31" ASSEMBLED

1N020735SSCHS.STEEL CABLE 1/4" X 34 7/16"

2015-06-17Page 1 / 3


Edition

Cable & cable clamp


1N020753SSCHCABLE 1/4" S.S.X 51-7/8" ASSY1N0207-SSPLSWIRE 1/4" 7 X 19 STAIN LESS1N0208PLSSTAINLESS-STL WIRE 1/8" (7X19)


Ass. cable galv. Steel

1N020722CHASS.CABLE GALV STEEL 1/4"X 25"1N020732CHCABLE 1/4"GALV.X 31" ASSEMBLED

1N020733CHCABLE 1/4"GALV.X 32-3/16"ASSY

1N020735CHASS.CABLE GV ST 1/4X 34-15/16"1N020753CHCABLE 1/4"GALV.X 51-7/8" ASSY


Cable clamp

1N9001CHWIRE U-BOLT 1/16"

1N9002CHWIRE U-BOLT 1/8"1N9003CHWIRE U-BOLT 3/16"

1N9004CHWIRE U-BOLT 1/4"1N9006CHWIRE U-BOLT 3/8"1N9007CHWIRE U-BOLT 1/2"


Stainless steel cable clamp

1N9004-SSCHWIRE U-BOLT 1/4" ST.ST.

2015-06-17Page 2 / 3


Edition

Cable & cable clamp


1N9006-SSCHWIRE U-BOLT 3/8" ST.STEEL


Zinc cable clamp

1N9002-ZNCHWIRE U-BOLT 1/8" ZINC NICKEL

1N9003-ZNCHWIRE U-BOLT 3/16" ZINC NICKEL

1N9004-ZNCHWIRE U-BOLT 1/4" ZINC NICKEL1N9006-ZNCHWIRE U-BOLT 3/8" ZINC/NICKEL


Galv. cable clamp

1N9006-HDCHWIRE U-BOLT 3/8" HOT DIP

2015-06-17Page 3 / 3


Edition

Turnbuckle



Turnbuckle (hook & eye)

1C3053CHTURNBUCKLE 1/4" PLT HOOK-EYE


Turnbuckle (eye & eye)

1C3065CHTURNBUCKLE 5/16"X4-1/2"EYE-EYE1C3080CHTURNBUCKLE 3/8" X 6" EYE-EYE

1C3087CHTURNBUCKLE 1/2"X 6" EYE-EYE

1C3088CHTURNBUCKLE 1/2"X 9" EYE-EYE1C3089CHTURNBUCKLE 1/2"X 12" EYE-EYE


Turnbuckle (eye & eye) drop-forged

1C3066CHTURNBUCKLE STEEL GALV.3/4 X 18


Turnbuckle (eye & eye) stainless steel

2014-08-04Page 1 / 2


Edition

Turnbuckle


1C3087-SSCHTURNBUCKLE 1/2"X6"EYE-EYE S.S.


Turnbuckle (eye & eye) zinc

1C3087-ZNCHTURNBUCKLE 1/2"X 6" EYE-EYE ZN

2014-08-04Page 2 / 2


Edition

EGreenhouse covering

Page Page title

68 Bird net

61 BJ thermal screens

12 Clear polyethylene film

41 Corrugated polycarbonate

31 Covering accessories

42 Double polycarbonate

99 Fabric

27 Griplock

80 Groud strip joint

64 Insect screen

62 LS Econet insect screen

60 LS thermal screens

43 PCSS accessories

21 Polyethylene accessories

29 Polyethylene attachment

20 Polyethylene film coating

23 Polylock

25 Polytech

53 Shade cloth

54 Shade cloth

52 Shade cloth attachments

14 White polyethylene film

28 Wirelock

26 Wiretech

2018-05-15 Page 1 / 1

Section: E 1A

Effective date: 2018-04-27

Polyethylene covering

Minimum width required, including Polylock, rolling tube, drip molding, etc.

W S PC PL PP PV RC RL VG

Old Nordique

21'- 4" 23'-9" 8'-6" 16'-0" 10'-0" 8'-5" 19'-1" 24' 26'-4" 10'-0" 17'-8" 10'-0" 9'-10" 20'-6" 25' 27'-4" 10'-6" 18'-0" 10'-0" 10'-4" 21'-0" 28' 30'-6" 12'-0" 20'-0" 10'-0" 12'-0" 22'-7" 30' 32'-6" 13'-0" 21'-0" 10'-0" 12'-11" 23'-7"

Nordique NG UNTIL 2009

14' 16'-5" 16' 18'-6" 18' 20'-8" 7'-10" 17'-4"

21'- 4" 24'-2" 9'-1" 17'-1" 10'-0" 20'-5" 9'-7" 19'-1" 43" 24' 27'-0" 10'-6" 18'-6" 10'-0" 23'-3" 11'-0" 20'-6" 43" 25' 28'-2" 11'-1" 19'-1" 10'-0" 24'-5" 11'-7" 21'-1" 43" 28' 31'-4" 12'-8" 20'-8" 10'-0" 27'-6" 13'-2" 22'-8" 43" 30' 33'-5" 13'-8" 21'-9" 10'-0" 29'-7" 14'-3" 23'-9" 43"

31'- 6" 35'-0" 14'-6" 22'-6" 10'-0" 31'-2" 15'-0" 24'-6" 43"

Nordique NG FROM 2010

14' 16'-5" 16' 18'-6" 18' 20'-8" 7'-10" 17'-4"

21'- 4" 24'-2" 8'-7" 17'-10" 11'-5" 20'-5" 9'-7" 19'-1" 43" 24' 27'-0" 10'-0" 19'-3" 11'-5" 23'-3" 11'-0" 20'-6" 43" 25' 28'-2" 10'-7" 19'-10" 11'-5" 24'-5" 11'-7" 21'-1" 43" 28' 31'-4" 12'-2" 21'-7" 11'-5" 27'-6" 13'-2" 22'-8" 43" 30' 33'-5" 13'-2" 22'-8" 11'-5" 29'-7" 14'-3" 23'-9" 43"

31'- 6" 35'-0" 14'-0" 23'-3" 11'-5" 31'-2" 15'-0" 24'-6" 43"

Width includes extra polyethylene W S PC PL PP PV RC RL VG

LUMINOSA 30'

12'-0" Poly 13'

24'-0" Poly 25'

36' 39'-7" Poly 40'

13'9" Poly 14'

27'11" Poly 28'

15'-4" Poly 16'

Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2018-05-10

Tel.: 450-756-1041 1-888-427-6647 Fax: 450-756-8389 harnois.com Page 1 / 4

Section: E 1A




W S SV BM BP BR MB MV PB PP PV RB RV VM VP VR V

SHELTER 18'-7" 28'

21'-6" 32'

25' 32'

25' 37'-10" 25'8" 26'-3" 15'-7" 9'-7" 20'-3" 6'-8"

OVALTECH I 27' 40' 27'11" 27'-4" 16'-8" 10'-8" 21'-4" 6'-8"

30' 46'-2" 33'10" 30'-5" 19'-9" 13'-9" 24'-5" 6'-8"

OVALTECH III Until 2009

25' 43'-2" 31'-8" 26'-5" 28'-11" 18'-1" 10' 12'-1" 12'-3" 6'-3" 21'-5" 22'-11 6'-8"

30' 48'-4" 36'-10" 34'-8" 29' 31'-6" 13'-9" 7'-9" 20'-8" 10' 14'-8" 20'-10" 14'-10" 28'-8" 23' 25'-6" 6'-8"

32' 50'-5" 38'-11" 36'-10" 30' 32'-7" 13'-9" 7'-9" 21'-8" 10' 15'-8" 21'-11" 15'-11" 30'-10" 24' 26'-7" 6'-8"

35' 53'-8" 42'-2" 39'-10" 31'-8" 34'-2" 13'-9" 7'-9" 23'-4" 10' 17'-4" 23'-6" 17'-6" 33'-10" 25'-8" 28'-2" 6'-8"

OVALTECH III From 2010

25' 43'-2" 31'-8" 27'-1" 28'-11" 17'-7" 11'-5" 11'-7" 12'-3" 6'-3" 21'-1" 22'-11 6'-8"

30' 48'-4" 36'-10" 34'-8" 29'-8" 31'-6" 13'-9" 7'-9" 20'-2" 11'-5" 14'-2" 20'-10" 14'-10" 28'-8" 23'-8" 25'-6" 6'-8"

32' 50'-5" 38'-11" 36'-10" 30'-9" 32'-7" 13'-9" 7'-9" 21'-3" 11'-5" 15'-3" 21'-11" 15'-11" 30'-10" 24'-9" 26'-7" 6'-8"

35' 53'-8" 42'-2" 39'-10" 32'-4" 34'-2" 13'-9" 7'-9" 22'-10" 11'-5" 16'-10" 23'-6" 17'-6" 33'-10" 26'-4" 28'-2" 6'-8"

40' 48' 37'-1" 27'-10" 21'-10" 31'-1" 6'-8"

MAXIDOME 50' 43'-1" 32'-5" 26'-5" 37'-1" 6'-8"

60' 48'-5" 37'-9" 31'-9" 42'-5" 6'-8"

PLASTIGRO 30' 42'-6"

16' 28'

TUNNEL 18' 32'

25' 32'

VERTISER B 25' 40' 5'-6"

VERTISER H 25' 44' 7'-6"

48' POLY WILL COVER FROM SIDE TO SIDE, OVER THE DOUBLE POLYLOCK

A 40' POLY CAN BE USED, BUT WILL NOT COVER PEAK VENT ROLL-UP



Section: E 1A




W S BP LX7 LX10 PB PP PV VP V X7 X10 OVALTECH III – 40'

Until 2009 40' 59'-4" 34'-6" 46'-2" 37'-9" 26'-2" 10' 20'-2" 28'-6" 6'-8" 8' 14'

W S BP LX7 LX10 PB PP PV7 PV10 VP7 VP10 X7 X10 OVALTECH III – 40'

From 2010 40' 59'-4" 35'-2" 45'-5" 37'-11" 25'-8" 11'-5" 18'-8" 14'-8" 28'-2" 24'-2" 8' 14'

OVALTECH IV – 40' 40' 59'-4" 35'-2" 45'-5" 37'-11" 25'-8" 11'-5" 18'-8" 14'-8" 28'-2" 24'-2" 8' 14'

OVALTECH IV – 42' 42' 61'-8" 36'-6" 47'-2" 39'-5" 26'-8" 11'-5" 19'-4" 15'-3" 29'-3" 25'-1" 8' 14'

LENGTH OF COVER GIVEN AS INDICATION ONLY

THE COVERING INCLUDES THE 24" FOR THE CENTER ROLL-UP TUBE

OVALTECH III – 40' OVALTECH IV – 40' + 42'



Section: E 1A




W S PP PV RL V VP

28' 37' 42'-9"

TUNNELPRO 31' (High) 41'-4'' 47'-2"

31' (Low) 41'-4'' 45'

CASAVERDE 26'-3" 18'-7" 30" 12'-7" 10'-4" 9'-6"

OASIS 1 TO 4 36' 40' 7'

OASIS 5 35'-9" 40' 7'



Clear polyethylene film

Effective date: 2018-05-25Section: E 12


6mil clear film HS

Clear film 6mil high strength.

5B29960606PLSPOLY CLEAR HIGH STRE.6 MIL/6'

5B29960612PLSPOLY CLEAR HIGH ST.6 MIL/12.5'















6mil clear film HS (length 105')Clear film 6mil high strength.

>>> Pre-cut roll (length 105')

5B29960612RLRLSPOLY CLEAR H.S.6MIL 12.5'X105'

5B29960620RLRLSPOLY CLEAR H.S. 6 MIL 20'X105'




2018-05-29

Page 1 / 2

Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0

Tel.: 450-756-1041 1-888-427-6647 Fax: 450-756-8389 harnois.com

Edition

Clear polyethylene film



Anti-drip+thermal film HS

Clear anti-drip and thermal film 6mil high strength.

5B39920612PLSPOLY AD THERMAL HS 6MIL/12.5'

5B39920614PLSPOLY AD THERMAL HS 6 MIL/14'




5B39920625PLSPOLY AD THERMAL HR 6 MIL/25'









2018-05-29

Page 2 / 2



Edition

White polyethylene film



3mil white film (winter)

White film 70% 3mil for winter protection.

5BGE0332PLSOVERWINTER WHITE 3 MIL 70%/32'

5BGE0340PLSOVERWINTER WHITE 3 MIL 70%/40'


4mil white film (45%)

Lifetime: 1 year

5BGB3436PLSSUPER UVA WHITE 4MIL 45% 36'1Y





6mil white film (70%) HSWhite film 70% 6mil high strength.

5B65930606PLSPOLY WHITE 70% HS 6 MIL/6'








2018-05-15

Page 1 / 2



Edition

White polyethylene film




5BGB0848PLSPOLY WHITE 70% HS 8 MIL/48'






2018-05-15

Page 2 / 2



Edition

Polyethylene film coating



Kool Ray

This white product can be applied on different coverings to reflect sun infrared rays and cut down heat inside greenhouses. Use only on glass, fiberglass or polyethylene film. This product takes off by frost or brushing. Should dry for 24 hours before the rain.Containers: 1 gallonApplication rage: Depending of the intensity of shade required by cropSuggested use 8:1 (average water:Kool Ray)Kool Ray is more efficient when applied by spraying.

8H100-1CHLIQUID SHADING K.RAY CLASSIC


SunClear"SunClear" to eliminate dripping due to condensation. Effective on all plastic covers, rigid or flexible and on glass. This product increases quantity of light inside greenhouse. Your plants will grow faster and better with SunClear.Recommended dilution is 1 :100Suggestion : container of 32 oz in 25 gallons us covers an area of approximately 10,000 square feet

8H003CHSUN CLEAR NO-DRIP COAT (QT)

2018-05-04

Page 1 / 1



Edition

Polyethylene accessories



Clip for tube

A clip to secure the film to a round tube. Ideal for natural ventilation roll-up system on polyethylene covered greenhouse.

2M901-1CHTOOL FOR CLIP 5C21 AND 5C23

5C21CH1" FILM CLIP

5C23CH1-1/4" FILM CLIP


Adhesive tape

Adhesive tape used to repair perforation and tears in polyethylene films, UV resistant.

5C05-1RLSGREY DUCT TAPE 2 " X 180'

5C07-1RLSDOUBLE FACE TAPE 4"X 50 METERS

5C07-2RLSDOUBLE FACE TAPE 1"X 50 METERS

5C16-10RLSACRYLIC TAPE 10"X 48'



5C16-5RLSACRYLIC tape 100mm x 15M


5C17-3RLSTAPE FOR INSULATION 3"X 300'

5C17-48RLSACRYLIC TAPE POLY 48mm X 66 M

5C18-12RLSTAPE WH/WH 10 OZ 12"X 50'

5C18-4RLSTAPE WH 6 OZ 4"X 60'

5C18-5RLSTAPE WH 72mm x 55 M

5C19-4RLSBLUESKIN WB 4" X 50'

2018-06-12

Page 1 / 3



Edition




Polyethylene batten tape

Woven polyethylene strap, UV treated. Life expectancy of 3 years.

5P090RLSBRAIDED POLYETHYLENE 2"X 200'




Polyester webbing- White polyester webbing- UV treated- Life expectancy of 5 years

5P088RLSPOLYESTER STRAP 1-1/4"x 492'


Webbing

- White polyester webbing for tensioning fabric cover in MegaDome- UV treated

5P095PLS1" STRAP 4800 LB

5P096-1CH1"X 50'STRAP(2200LBS)

5P097PLS2" STRAP 10000 LBS

5P098PLS1" STRAP (2200 PDS)

2018-06-12

Page 2 / 3



Edition




Strap fastener

Adjust the tension of the polyester strap with this fastener.

5P085CHPOLYESTER STRAP FASTENER

2018-06-12

Page 3 / 3



Edition

Polylock



Polylock kit

Polylock is an aluminum extrusion used to secure soft covering material, like polyethylene film, at the periphery. This system can lock one or two layers of films. Complete Polylock kit including: pre-drilled female part, male, rubber, wood screw or bolts and nuts.

3M100CH12' POLYLOCK KIT WITHOUT BOLT

3M102CH12'POLYLOCK KIT + 3/4" BOLTS

3M103CH12'POLYLOCK KIT + 1-1/2" BOLTS

3M104CH12' POLYLOCK KIT + 2" BOLTS

3M106CH12'POLYLOCK KIT +SCREWS 1-1/2"

3M120CH10'POLYLOCK KIT + 3/4" BOLTS

3M121CH10'POLYLOCK KIT + 1-1/2" BOLTS

3M122CH10' POLYLOCK KIT + 2" BOLTS

3M123CH10' POLYLOCK KIT WITHOUT BOLT

3M124CH10'POLYLOCK KIT +SCREWS 1-1/2"


Polylock toolSpecial Polylock tool help for insert installation.

2M900CHPOLYLOCK HAND TOOL

2018-05-15

Page 1 / 3



Edition

Polylock



Polylock rubber

Rubber only. Grey rubber Black rubber White rubberCode 5C43-1 / 5C43-3 5C44 5C46-1Dimension 0.260" 0.236" 0.220"-------------------------------------------------------------------------------------------------Minimum film 0.004" 0.010" 0.018"Maximum film 0.016" 0.024" 0.032"

Material thickness:Polyethylene films: 0.004"@ 0.008"Insect barrier: 0.010"10oz membrane shelter: 0.020"K tarp shelter: 0.025"VineGard vinyl: 0.015"Enduro shade: 0.025"

5C43-1CHPOLYLOCK PLASTIC INSERT.260X6'

5C43-3CHPOLYLOCK PLASTIC INSERT.260X5'

5C44CHPOLYLOCK PLASTIC INSERT.236X6'

5C46-1CHPOLY PLASTIC INSERT 6'FR CLOTH


Double Polylock

Flat double Polylock is used to fix two opposite polyethylene films on any plane surface (gable end, etc.).

2C302CH95-3/4" DOUBLE POLYLOCK

5C35-9CHDOUBLE FEM. POLYLOCK 143-3/4"

2018-05-15

Page 2 / 3



Edition

Polylock



Female Polylock

Polylock female part.

2M935CHDRILLED POLYLOCK 5'

2M936CH10' FEMALE POLYLOCK (6 HOLES)

2M937-1CH143.75"FEM.POLYLOCK (9 HOLES)

2M938CHDRILLED POLYLOCK 6'

2N7130-1CH4M FEM.POLYLOCK (9 HOLES)


Male Polylock

Male only, without rubber.

5C42-1CH6' MALE POLYLOCK

2018-05-15

Page 3 / 3



Edition

Section: E 23A


Polylock

Limit of use of the polylock with various types of covering

MATERIAL IN THE POLYLOCK

Grey rubber insert

5C43-1 / 5C43-3 .260"

Black rubber insert 5C44 .236"

Natural rubber insert

5C46-1 / 5C46-3 .220"

Remarks

Minimal thickness .004 .010 .018

Maximal thickness .016 .024 .032

.008 + .008 Max. OK – – –

.008 + .008 + Econet .010 – – – Max. OK

.008 + insect .010 – – – OK – – –

.006 + .004 OK – – – – – –

.006 + .004 + Econet .010 – – – OK – – –

.006 + Econet

.018 (Mexico) – – – OK – – –

Green poly fabric 12 oz – – – Max. OK Include welding

.006 + poly fabric 12 oz – – – – – – OK

.012 + poly fabric 12 oz – – – – – – Max. 2 polylock tools

Note: Do not use wirelock extrusion with poly fabric 12 oz. Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2018-05-02


Polytech



Polytech II male part

5C81CH72" MALE POLYTECH


Nylon ropeNylon ropes to minimized flapping of roll-up system on natural ventilation. The rope size depends on the size and angle of natural vent opening.UV resistant.

Rope natural ventilation:Arch at 5' = 2.65/ft (by side)Arch at 6' = 2.38/ft (by side)Arch at 8' = 2.30/ft (by side)

1N1004PLSWHITE NYLON ROPE 1/8"

1N1005PLS1/4" NYLON ROPE WHITE


Polytech II clipClip-hook for polytech II.

5C73CHCLIP-HOOK FOR POLYTECH II

2018-05-07

Page 1 / 2



Edition

Polytech



Polytech III clip

Clip-hook for polytech III.

1P085-1CHPOLYTECH III HOOK


Polytech I clipPolytech 1 clip (use on every 18 inches minimum).

2M943CHPVC SECURING INSERT POLYTECH I

2018-05-07

Page 2 / 2



Edition

Wiretech



Wiretech

DOUBLE MOLDINGThis versatile molding is quick and easy to install. Being structural, it does not require any additional support, which makes it possible to save time and money when installing.

Equipped with a snow deflector, its double configuration allows installing the polythene of greenhouse’s roof separately from roll-ups polythene, which justify the use of polythene less wider and easier to handle.

Ex.: 2 rolls of 40’ for the roof + 2 rolls of 12’ for roll-ups instead of 2 rolls of 54’ width

Union is necessary to assemble end to end is the #2B1355 which requires 2 bolts #1C0621 and 2 nuts #1CB787 by union.

2B1355CHUNION FOR 5C911

5C911CH144" WIRETECH ALU. EXTRUSION

2018-05-04

Page 1 / 1



Edition

Griplock



1" Griplock

Griplock is the safest way to secure films to pipe. Ideal for shade cloth or for center roll-up natural ventilation systems. Screw Griplock directly onto round tube 1" diameter.

1C2206CHSELF DRL.SCREW RND HEAD#8X1/2"

2A216CHTUBE 1"R X 143-7/8"+ 3"SW GV

2A6964CH96"DRILL.ALU.GRIPLOCK(FOR 1")

5C1002CH2.5" PLASTIC GRIPLOCK(FOR 1")


1-1/4" & 2" Griplock

Griplock is the safest way to secure films to pipe. Ideal for shade cloth or for center roll-up natural ventilation systems. Screw Griplock directly onto round tube 1-1/4"(for BVK plastic Griplock and 1-1/4" or 2" diameter for aluminum Griplock).

00288-000-1CH95 3/4 GRIPLOCK (1-1/4 & 2)

1C2206CHSELF DRL.SCREW RND HEAD#8X1/2"

2A7600CH1 1/4"R X 12'3"SW.ROLLING TUBE

5C1003CH2.5" PLASTIC GRIPLOCK(1-1/4")

5C33CH95-3/4" GRIPLOCK ( 1 1/4 & 2")

2018-05-03

Page 1 / 1



Edition

Wirelock



Wirelock kit

This aluminum extrusion is used to lock greenhouse film. Use 1 or 2 wires to secure the film inside the female extrusion. This method allows you to fit one film separate from a second.

Wirelock can be used to secure polyethylene film on gable end ribs, on top of natural ventilation, on opening outline (doors, windows), etc. Wirelock kit including pre-drilled female part, one length of spring wire (depending on kit), screws or bolts and nuts (square tube not included).

3M200CH12' WIRELOCK KIT WITHOUT BOLT

3M202CH12'WIRELOCK KIT + 1" BOLTS

3M203CH12' WIRELOCK KIT +1-1/2" BOLTS

3M204CH12' WIRELOCK KIT + 2" BOLTS

3M205CH12' WIRELOCK KIT+1/4-20 M-BOLT

3M206CH12' WIRELOCK KIT +1-1/2" SCREW


3M221CH10' WIRELOCK KIT + 1-1/2" BOLT


3M223CH10' WIRELOCK KIT WITHOUT BOLTS

3M224CH10' WIRELOCK KIT +1-1/2" SCREW

3M225CH10' WIRELOCK KIT+1/4-20 M-BOLT


Wire-Plast spring wireWirelock spring wire.We use one wire to hold one or two films; a second wire will be required to maintain gable end poly in the same female molding.

1N2018CH2.2mm X 2M WIRE-PLAST

2018-05-29

Page 1 / 3



Edition

Wirelock



Wirelock hook

1N2019CHSPRING HOOK (WIRELOCK)


Wirelock female part

2A2106CHFEMALE WIRELOCK 10' DRILLED

5C77-1CH95-3/4" WIRELOCK EXTRUSION







Light wirelock

2A2108-1CHSMALL WIRELOCK 10' (6 HOLES)

2A2109-1CHSMALL WIRELOCK 12' (9 HOLES)

2A2111-1CHSMALL WIRELOCK 14' 9 HOLES

2N7135CHSMALL WIRELOCK 157-3/8 4m 9HOL

5C823-10PTCH127-7/8"LIGHT WIRELOCK (3.25m)

5C823-3PTCH71-3/4" LIGHT WIRELOCK


2018-05-29

Page 2 / 3



Edition

Wirelock


5C823-5PTCH118" LIGHT WIRELOCK (3m)



5C823-8PTCH157-3/8"LIGHT WIRELOCK (4m)

5C823-9PTCH177" LIGHT WIRELOCK (4.5m)


Tube

Union is necessary to assemble end to end is the #2B1356-1 which requires 4 bolts #1C0621 and 4 nuts #1CB787 by union.

2A2112CH5' WIRELOCK TUBE 2"

2A2113CH6' WIRELOCK TUBE

2B1356-1CH2" X 8" WIRELOCK TUBE UNION

5C692CHWIRELOCK TUBE 2"X 119-3/4"

5C693CHWIRELOCK TUBE 2"X 143-3/4"

2018-05-29

Page 3 / 3



Edition

Polyethylene attachment



Poly-Zip

Two parts polyethylene black extrusion. Suitable for joining films together for closing center roll-up films for winter.

5C1000PLSPOLY-ZIP PR-700

2018-05-04

Page 1 / 1



Edition

Covering accessories



Square foam

Polyvinyl square foam molding; use lengthwise along single polycarbonate and fiberglass panel or on end panels with 1J140 type vinyl flashing.

Roll of 12'6".

5D04PLS1"x1" SQUARE POLYVINYL FOAM


Neoprene foam

Neoprene molding. Suggested uses :5D02…..Spacer on PCSS roof purlins5D05…..Between PCSS and 1J140 vinyl flashing5D09…..Both sides of ridge on slice rib section 5D18…..Vermax greenhouse5D22…..Around opening panel, fans, doors and in the polytech section of the wiretech5D24-1..To install male polytech under pressure in polytech II molding5D28…..Post gasket for Oasis5D34-1..For chimney and shutter for MegaDome

5D02RLS12.5'SELF ADHESIF FOAM 3/4 X 1

5D05RLSNEOPRENE 5/8" X 1" X 12.5'

5D09RLSFOAM NEOPRENE 3/4" X 1" X 10'

5D17-1RLS1/2" X 1"X11.5' NEOPRENE S.ADH

5D18PLS5/16" X 1" NEOPRENE

5D22RLS1/8"THx7/16"WDX10'SELF.ADH.NEO

5D24-1PLSSELF-ADHESIVE FOAM 3/8" X 3/8"

5D28CHGASKET EPDM 2-3/4" ID X 4" OD

5D34-1RLS1/4"TH 1-1/2"WDX25'SELF.AD.NEO

2018-05-03

Page 1 / 4



Edition




Silicone

Silicone caulking; covers approximately 25 feet depending application.5D10-1 and 5D10-1B : Used for greenhouses5D10-S and 5D10-SB : Used for MegaDome

5D10-1CHCLEAR SILICONE CARTRIGE

5D10-1BCHWHITE SILICONE CARTRIGE

5D10-2CHGREY RTV SILICONE CARTR.

5D10-SCHSUPRA SEALANT CARTRIGE

5D10-SBCHBUTYL SEALANT CARTRIGE WHITE

5D10-SGCHBUTYL SEALANT CARTRIGE GREY


Ridge flashing

Aluminum ridge cap molding.

2A6738CH12' TOP EXTRUSION

2A6739CH6' TOP EXTRUSION


Angled flashing

Single vinyl flashing (sloped).

1J132CH12'VINYL FLASHING UNDER GUTTER

2018-05-03

Page 2 / 4



Edition




Single flashing

Single vinyl flashing (straight).

1J140CH3.0m SINGLE 3/4"VINYL FLASHING

1J141CH1.0m SINGLE 3/4"VINYL FLASHING


Metal srews

Wood screw + washer.

5D11CH#12x1"SELF DRILL.SCREW+WASHER

5D11-BCH#12x1"SELF DRILL.SCREW+WASH WT

5D12CH#12x1-1/2"SELF DRIL.SCREW+WASH

5D15CH#12x1-1/2"DRILLSCREW+1-1/8"NEO

5D16CHWASHER NEO 1/4"ID x 1-1/8"OD

5D30CH#10x1"WOODSCREW+SEALING WASHER


Wood srews

RN28214CHWOOD SCREW #12 X 1 1/2" PLT.

RN28216CH#14x1-1/2"WOODSCREW(SQU.SOC.)

2018-05-03

Page 3 / 4



Edition




Neoprene washer

Sealing washer only.

1C2082CHWASHER NEO 1/8"I.D 1/2"O.D.

1C2083CHWASHER NEO 1/4"I.D 5/8"O.D

1C2084CHWASHER NEO 5/16"I.D 3/4"O.D

1C2085CHWASHER NEO 3/8"I.D.X 1"O.D.

1C2086CHWASHER NEO 7/16"I.D.X 1"O.D.

2018-05-03

Page 4 / 4



Edition

Section: E 40


Rigid covering

For corrugated polycarbonate, add 3" to all length except "P" W S PC P RC CV RL LV C

MAXIDOME 40' 30' 2" 26' 20' 34' 28' 50' 35' 6" 31' 5" 25' 5" 36' 5" 30' 5" 60' 41' 36' 10" 30' 10" 44' 10" 38' 10"

OLD NORDIQUE

21' 4" 11' 9" 7' 10" 4' 7' 3" 16' 5" 24' 13' 2" 9' 3" 4' 8' 8" 17' 10" 25' 13' 8" 9' 10" 4' 9' 2" 18' 4" 28' 15' 4" 11' 4" 4' 10' 9" 19' 10" 30' 16' 3" 12' 5" 4' 11' 10" 20' 10"

NORDIQUE NG

14' 7'10" 4' 4' 16' 8'11" 5'1" 4' 18' 10' 6'2" 4'

21' 4" 11'9" 7'11" 4' 8'2" 16'6" 24' 13'2" 9'4" 4' 9'7" 17'11" 25' 13'9" 9'11" 4' 10'2" 18'6" 28' 15'3" 11'5" 4' 11'8" 20' 30' 16'4" 12'6" 4' 12'9" 21'1"

31' 6" 17'1" 13'4" 4' 13'7" 21'11"



Section: E 40


Rigid covering

Length of sheet of triple polycarbonate or corrugated polycarbonate required to cover splice or complete roof

W S PC P RC CV RL LV C

OASIS 1 to 4 36' 40'

OASIS 5 35' 9" 40'

OVALTECH 1 25' 18' 5" 14' 7" 4' 14' 3" 8' 3" 23' 1" 17' 1" 27' 19' 6" 15' 8" 4' 15' 4" 9' 4" 24' 2" 18' 2" 30' 22' 7" 18' 9" 4' 18' 5" 12' 5" 27' 3" 21' 3"

OVALTECH 3 25' 21' 1" 17' 5" 4' 16' 10" 10' 10" 26' 3" 20' 3" 30' 23' 8" 20' 4' 19' 5" 13' 5" 28' 10" 22' 10" 32' 24' 9" 21' 1" 4' 20' 5" 14' 5" 29' 10" 23' 10" 35' 26' 4" 22' 8" 4' 22' 16' 31' 6" 25' 6"

VERTISER B 25' 15' 5'

VERTISER H 25' 15' 7'



Corrugated polycarbonate



Clear

"LEXAN" CORRUGATED POLYCARBONATE- Up to 90% light transmission- Filtering out harmful ultraviolet light- High impact resistance- Exceptionally resistant to weathering- Flexible and easy to install- Temperature ranging: -40°F to +250°F (-40°C to + 121.11°C)- 10 years limited warranty against yellowing and loss of light transmission

5K6208CHCorrugated sheet 50"x 8' clear

5K6210CHCorrugated sheet 50"x 10'clear






5K6232CHCORRUGATED SHEET 50"X 32'CLEAR


White"LEXAN" CORRUGATED POLYCARBONATE- Up to 48% light transmission- Filtering out harmful ultraviolet light- High impact resistance- Exceptionally resistant to weathering- Flexible and easy to install- Temperature ranging: -40°F to +250°F (-40°C to + 121.11°C)- 10 years limited warranty against yellowing and loss of light transmissionMINIMUM QUANTITY 2,000 LBS

5K6212-BCHCORRUGATED SHEET 50"X 12'WHITE


2018-05-08

Page 1 / 2



Edition

Corrugated polycarbonate


5K6216-BCHCorrugated sheet 50"x 16'white


5K6224-BCHCorrugated sheet 50"x 24'white


MoldingEPDM molding, 1" wide.

5D19PLSCORRUGATED FOAM CLOSURE STRIP

2018-05-08

Page 2 / 2



Edition

Double polycarbonate



Clear

"LEXAN THERMOCLEAR"- Up to 81% light transmission- Impact performance over a wide temperature range, -40°F to +248°F (-40°C to +120°C)- 10 years limited written warranty against discoloration, loss of light transmission and loss of strength due to weathering

5K4808CHPCSS CLEAR 8mm ND 48" X 96"

5K6800PCPCSS CLEAR 8mm ND 71-1/4" WIDE

5K6808CHPCSS CLEAR 8mm ND 71-1/4"x 96"

5K6810CHPCSS CLEAR 8mm ND 71-1/4"x120"




5K6818CHPCSS CLEAR 8MM ND 71-1/4"X216"






5K7807CHPCSS CLEAR 8mm 78"X 84"2WALL

5K7810CHPCSS CLEAR 8mm 78"X 120" 2WALL






5K7819-1CHPCSS CLEAR 8mm 78" x 236" (6M)


5K7821CHPCSS CLEAR 8mm 78"X 252"2WALL


2018-06-12

Page 1 / 2



Edition

Double polycarbonate



White

"LEXAN THERMOCLEAR"- Up to 20% light transmission- Impact performance over a wide temperature range, -40°F to +248°F (-40°C to +120°C)- 10 years limited written warranty against discoloration, loss of light transmission and loss of strength due to weathering

5K6708-BCHPCSS White 8mm ND 71-1/4"x 96"

5K6710-BCHPCSS White 8mm 71-1/4"x118-1/2

5K6712-BCHPCSS White 8mm ND 71-1/4"x144"




White/black/white"Macrolux" polycarbonate white/black/white- Light transmission: 0%- High thermal insulation- High resistance to shock at extreme temperatures- 10 year non prorated warranty

5K6808-BOCH8mm 71-1/4"x96" 0% Lt.Transm.

5K6810-BOCHPCSS OPAQUE 8mm 71-1/4"X 120"





5K6824-BOCHPCSS Opaque 8mm ND 71-1/4"x288

2018-06-12

Page 2 / 2



Edition

PCSS accessories



Bottom extrusion

"U" aluminum extrusion for the bottom of 8mm PCSS.

5C78CH128" PCSS ALUM. MOULDING

5C79CH172" PCSS ALUM. MOULDING


Base extrusion

Aluminum base molding.

5C721CH10'ALUM.BASE MOLDING FOR PCSS

5C722CH12'ALUM.BASE MOLDING FOR PCSS

5C723CH16'ALUM.BASE MOLDING


Cap extrusion

Aluminum base molding. Use with 1C2214 screws.

2A6952CH10' BASE MOULDING CAP



2018-05-03

Page 1 / 3



Edition

PCSS accessories



Gasket for extrusion

5C660PLSSEALING RUBBER FOR EXTRUSION


Extrusion union

2A6950CHBASE MOULDING CAP UNION

2A6951CHALUMINIUM BASE UNION


"H" extrusion

Aluminum extrusion to join triple polycarbonate panels.

5C735-1CH10'(H)ALUM.MOLDING FOR 8mmPCSS

5C736-1CH12'(H)ALUM.MOLDING FOR 8mmPCSS

5C737CH157-1/4"(H)ALUM.PCSS.MOLDING


ToolHolding washer #5D25 tool for easier installation.

2018-05-03

Page 2 / 3



Edition

PCSS accessories


2M920CHHOLDING TOOL FOR 5D25 WASHER


Nylon washerNylon spacers installed between polycarbonate and purlin prevent corrosion near screws. Drill hole 7/16"Ø in PCSS.

5D25CHNYLON WASHER .390"ID X 1.12"OD


Aluminium tape

Aluminum adhesive tape to seal top of triple polycarbonate.

5K202RLS2" X 150'ALUM.SEALING TAPE

5K203-2RLS1" X 150'ALUM.SEALING TAPE

2018-05-03

Page 3 / 3



Edition

Shade cloth attachments



Clip

Clip for monofilament shade cloth.

8M000CH11 PINS FASTENER FOR AGRINET

2018-05-04

Page 1 / 1



Edition

Shade cloth



40%

Shade cloth, locked stitch black round filament, monofilament, polyethylene high density, 40% shading, weight 140 gr/m2, U.V. stabilized.

8MK406PLS40% SHADED FABRIC 6'WIDE




40% with a seam






50%

Shade cloth, locked stitch black round filament, monofilament, polyethylene high density, 50% shading, weight 150 gr/m2, U.V. stabilized.Used mainly in garden centers.

8MK506PLS50% SHADED FABRIC 6' WIDE





2018-05-02

Page 1 / 3



Edition

Shade cloth



50% with a seam

Shade cloth, locked stitch black round filament, monofilament, polyethylene high density, 50% shading, weight 150 gr/m2, U.V. stabilized.Used mainly in garden centers.










60%





60% with a seamShade cloth, locked stitch black round filament, monofilament, polyethylene high density, 60% shading, weight 160 gr/m2, U.V. stabilized.



2018-05-02

Page 2 / 3



Edition

Shade cloth




70%Shade cloth, locked stitch black round filament, monofilament, polyethylene high density, 70% shading, weight 240 gr/m2, U.V. stabilized.>>> UNTIL SUPPLIES LAST





80%Shade cloth, locked stitch black round filament, monofilament, polyethylene high density, 80% shading, weight 300 gr/m2, U.V. stabilized.>>> UNTIL SUPPLIES LAST



2018-05-02

Page 3 / 3



Edition

Shade cloth



Shade cloth

Shade is manufactured from high quality vinyl impregnated polyester yarn, and is woven and heat set for stability. It is fire retardant (approved by the California fire Marshall).

6J122-PLPLS70% ENDU BLACK SHADE 75" WIDE

2018-05-02

Page 1 / 1



Edition

LS thermal screens



Tempa 5557 D FB

Energy saving: 57%Shading level in direct light: 55%Shading level in diffused light: 61%UV light transmission: 8%Install shiny side sunsideWarranty: 5 years

6J134-1PLSTEMPA 5557 D FB 3.35M WIDE

6J135PLSTEMPA 5557 D FB 4M WIDE


Tempa 5555 FR

Energy saving: 55%Shading level in direct light: 55%Shading level in diffused light: 59%UV light transmission: 34%Flame retardantInstall shiny side sunsideWarranty: 5 years

6J133PLSTEMPA 5555 FR AW .8 M WIDE

6J137PLSTEMPA 5555 FR AW 4M WIDE

6J138PLSTEMPA 5555 FR AW 0.6M WIDE

6J146PLSTEMPA 5555 FR AW 0.8M WIDE

2018-05-14

Page 1 / 1



Edition

BJ thermal screens



BJ85

Heat retention type:- Heat retention rate 70%- Light shading rate 85%

6J136PLSBJ85 THERMAL SCREEN 1M WIDE

6J139PLSBJ85 THERMAL SCREEN 4M WIDE

6J139-1PLSBJ85 THERMAL SCREEN 3.25M WIDE

6J139-2PLSBJ85 THERMAL SCREEN 4.3M WIDE

2018-05-07

Page 1 / 1



Edition

LS Econet insect screen



LS Econet 4045

LS ECONET is a ventilation screen for keeping harmful insects outside the greenhouse and useful insects inside.

- Hole size: 0.40 x 0.45 mm- Material: 100% polyolefin- Weight: 73 g/m²- Ventilation reduction: 30%- Direct light: 96%- Diffused light: 88%- Warranty: 5 years under all types of greenhouse covering and 3 years with outdoor use

6J4045-1PLSLS ECONET 4045 3.5 METERS WIDE

2018-05-03

Page 1 / 1



Edition

Insect screen



Insect screen

Insect screen, aphids and others.Transparent polyethylene monofilament fabric.Meshes are 0.011" x 0.032" (50 mesh)UV treatedWeight per square meter: about 120-140 grAphid: .013"Shade: about 20%6J153: Material used primarily for CasaVerde, but stored for small local sales

6J149PLSINSECT BARRIER 1.85M WIDE






2018-05-02

Page 1 / 1



Edition

Bird net



"Ornex" bird net

Polypropylene net protects openings against birds. Excellent for natural ventilation openings.0.006" wire3/8" x 3/8" squaresBreaking load: 75 lbs/ft²Weight 0.0024 lbs/ft²ATTENTION: Photodegradable net, do not sell for long time useWE CANNOT SEW THIS PRODUCT

6J118PLSORNEX NET 13' LARGE

6J119PLSORNEX NET 39"WIDE

6J120PLSORNEX NET 6'-5" WIDE

2018-05-07

Page 1 / 1



Edition

Ground strip joint



Ground strip joint

Black PVC strip completes area between bottom of the structure and the ground. This smooth strip is screwed on the last purlin or baseboard and the bottom part is buried in the ground. PVC strip is resistant to frost or structure movement. U.V. stabilized.Thickness: 0.04"

5BN409PLS9" HIGH GROUND STRIP

5BN4091RLS9" X 120' GROUND STRIP JOINT

2018-05-02

Page 1 / 1



Edition

Fabric



6 oz

5T111-144PLSPOLYFABRIC WHITE 6oz 144" WIDE


12 oz

5TP113-PLPLS144" POLYTARP WHITE/WHITE

5TP114-PLPLS144" POLYTARP WHITE/GREEN

5TP115-PLPLS144" POLYTARP WHITE/SILVER

5TP118-PLPLS144" POLYTARP WHITE/WHITE 30%

5TP119-PLPLS144" POLYTARP WHITE/TAN

5TP122-PLPLS144" POLYTARP WHITE/BLUE

5TP123-PLPLS144" POLYTARP WHITE/RED


Fire retardant 12 oz

5TP116-PLPLS144" POLYTARP WHITE/GREEN FR

5TP117-PLPLS144" POLYTARP WHITE/WHITE FR

5TP120-PLPLS144" POLYTARP WHITE/TAN FR

5TP124-PLPLS144" POLYTARP WHITE/BLUE FR

5TP125-PLPLS144" POLYTARP WHITE/SILVER FR

5TP129-PLPLS144"WIDE POLYTARP WH/WH F.R.M1

2018-05-08

Page 1 / 1



Edition

FGreenhouse climate

Page Page title

13 Air inlet shutter

14 Air inlet shutter

5 Canarm fan

38 Circulating tube

40 Climate control

79 CO2 control

78 CO2 generator

45 Electrical components

3 Euroemme fan

75 Furnaces

9 HAF Canarm

17 HAF Eco Fan

15 HAF fan

16 HAF Schaefer

18 HAF support

27 Hand crank

43 Harnois climate control

2 Harnois fan parts

41 Harnois TC4 climate control

42 Harnois TC7 climate control

76 Heater

70 Heating by microtube

44 iGrow 1400 climate control

46 iGrow 450/850 climate control

47 iPonic 614 climate control

24 Motorization

23 Motorization (parts)

12 Motorized shutter

11 Motorized shutter

8 Positive pressure fan

50 Priva climate control

51 Priva parts

6 Residential ventilation

2018-05-14 Page 1 / 2

Page Page title

25 Ridder motorization

20 Vertical fan Canarm

19 Vertical fan V-FloFan

2018-05-14 Page 2 / 2

Section:

Date effective:

F

2014-03-10

Forced ventilation of greenhouses selection guide 1. THE VENTILATION OF AIR CONDITIONING: SOURCE DATA:

A) ELEVATION ABOVE SEA LEVEL

QUEBEC CORRECTION FACTOR IN FOOT REGARDING ELEVATION FROM SEA LEVEL Elevation (feet) -1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 Correction factor 1.0 1.04 1.08 1.12 1.20 1.25 1.30 1.36 B) LIGHT INTENSITY (FOOT CANDLES)

QUEBEC CORRECTION FACTOR FOR MAXIMUM LIGHT RECEIVED INSIDE THE GREENHOUSE IN CANDLES FEET Candles feet 5,000 5,500 6,000 6,500 7,000 7,500 8,000 9,000 10,000 Correction factor 1.0 1.10 1.20 1.30 1.40 1.50 1.60 1.80 2.00

N.B.: Consider the shade system. C) EXTERNAL AND INTERNAL TEMPERATURE DIFFERENTIAL

CORRECTION FACTOR OF TEMPERATURE DIFFERENTIAL BETWEEN AIR INLET AND AIR OUTLET Temp. degree F 10 9 8 7 6 5 4 Correction factor 0.70 0.78 0.88 1.00 1.17 1.40 1.75 D) SHORT DISTANCE BETWEEN AIR INLET AND AIR OUTLET

CORRECTION FACTOR FOR A SHORT DISTANCE BETWEEN AIR INLET AND AIR OUTLET Distance (feet) 20 25 30 35 40 45 50 55 Correction factor 2.25 2.00 1.85 1.70 1.60 1.50 1.40 1.35 Distance (feet) 60 65 70 75 80 85 90 95 Correction factor 1.30 1.25 1.20 1.15 1.12 1.08 1.05 1.02 100’ and more no correction factor

VENTILATION NEEDS CALCULATION

In order to compute required CFM, the following formula is applied:

1. Width of greenhouse(s) x length x 8 (constant) = number of cubic foot 2. Number of cubic feet x factor(s) of conversion

N.B.: For the Montreal region, conversion factors should be as follow:

- 1,000 feet altitude: Conversion factor 1.0 - Light intensity: 6,000 P.C. conversion factor of 1.20 - Temperature differential: 7 degrees F: Conversion factor of 1.0

FAN(S) CHOICE

1. Ventilator choice in CFM has to be made for a static pressure of 0.10" of water. 2. Determine the number of "STEP" of wished ventilation.

If "STEP" of ventilation : -STEP 1 : 30% of capacity -STEP 2 : 70% of capacity for 2 STEP

30% of capacity for 3 STEP -STEP 3 : 40% of capacity

Example : 12,000 CFM 3 fans of 4,000 Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-03-10

Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 1/2 U:\Catalogue PDF\F.doc

Section:

Date effective:

F

2014-03-10

CHOICE OF AIR INLETS

It is recommended that the air speed does not exceed 250 feet per minute. So, the number of CFM divided by the length = the number of square feet of opening

Thumb's rule standard is 2 square feet per every 1,000 CFM.

INSECTS BARRIERS INFLUENCE

Insect barrier creates an air restriction, so fan has to compensate and will develop more static pressure.

Compensation will vary according to barrier's choice. Higher material density increase air restriction, and fan works.

For example: For an air speed of 250 feet per minute the static pressure loss will be:

Additional Pressure

Econet L : 0.02" = 0.12 Econet T : 0.15" = 0.25

However the static pressure looses are valid as long as the material is clean. It is strongly recommended to clean the material on a valid regular base.

To avoid the increase of fans quantity, and the electric consumption, a good practice is to increase fabrics surface area. Thumb's rule is 3:1 ratio of fabrics square footage vs air inlet square footage.

WINTRY VENTILATION

Ventilation level recommended is 1/10 of the summery ventilation capacity. This ventilation can be achieve by a positive pressure fan and a static air outlet (not motorized with a cover outside), or by an extraction fan. In that case, air inlet should be design for air speed of an 450 feet per minute. Cold air being heavier then warm air, it should be brought further inside to avoid temperature drop at the opening proximity.

It is recommended, when possible, that the air inlet be installed on the high portion of the greenhouse, it will facilitate the blending between warm and cold air.

RE-CIRCULATING FAN

The main purpose of the re-circulating fans is to reduce stagnant air layer at plant foliage level, and by the same token, to have better temperature uniformity.

Experiences tells that the optimum air velocity is between 40 and 100 feet per minute. Higher speed reduce yield by stressing plants with a too high transpiration.

Which system to propose: We have to remember that the movement of air is affected by the natural obstacles of the greenhouse. A flower producer will need a different system then one used by a vegetable producer.

1. HAF system (horizontal air flow) works by moving the air horizontally.

How to design: - 3 to 4 CFM per greenhouse floor sq.ft - Distance between fans should be 30 times fan diameter (18" diam. = 45 ft)

- Distance over plant shall be 3 to 4 feet - See drawing

Advantages: - Several small ventilators offer a better distribution of air - Slow air movement favors growth

Disadvantages: - Purchase cost - Electrical installation cost - Very low efficiency for productions with stake

FAN-JET

The most popular fan with motorized louvers is the Fan-Jet. The use of a tube for air distribution assures a better temperature uniformity. That system creates upward, downward and horizontal air movement. It goes from the tube to the sides vertically and from the sides to the fan horizontally.

The Fan - jet provided with motorized louvers is generally used as first stage ventilation. Nominally the Fan - jet can maintain a temperature differential of 15 degrees.

DESIGN: Refer to Harnois tables Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-03-10

Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 2/2 U:\Catalogue PDF\F.doc

Harnois fan parts

Date effective: 2013-10-23Section: F 2


Ball bearing

RHA1325CHBEARING PILLOW BLOCK 1" 1RG


Pulley

RE3144165CHPULLEY 11 X 1 STRAP 1/2RE7113104CHAJUSTABLE PULLEY 3" X 5/8

RE7117105CHPOULIE 4in x 1/2 Bel x 5/8 sh

RE7117109CHPULLEY 6"DIAM. 1600 PDS WLLRE7117110CHPULLEY 8"DIAM.

2013-10-23Page 1 / 1


Edition

Euroemme fan



36'' fan36" Euroemme fan, 1 or 3 speed, belt driven, stainless steel precoated propeller, rear mesh guard, solid galvanized steel shutters with centrifugal opening system.- 1 speed motor: 220V, 1 phase, 60 Hz, 3/4HP, 10.6/5.3Amps.- 3 speed system: Uses the same electrical input as the 1 speed, but the motor is three phased. A variable frequency drive converts the current from 1 to 3 phases and allows to program 3 (or 2) variable speeds; the drive acts also as a relay and an overload protection.- Air flow at top propeller speed (560 RPM): 13095 cfm @ 0.0" H2O 12036 cfm @ 0.075" H2O 10576 cfm @ 0.15" H2O- Galvanized steel housing: 42-3/4" X 42-3/4" X 15-1/8"- 62 Dba

2HBE36CHFAN EM36 3/4HP 1SPD.2HBE37-1CHFAN EM36 3/4HP 3SPD.


Components for 36"

1R0751412CH3/4HP 1 SPEED MARATHON MOTOR

1R0751413CH3/4HP 230/460 MARATHON MOTOR6BE24-ACHCOMPLETE CENTRIFUGAL SYSTEM

6BE36-ACHCOMPLETE CENTRIFUGAL SYSTEM

6BE36-BCHV-BELT 1/2" X 74" (A74)6BE36-CCHPROPELLER FOR EM36LX139-3CH1HP 220V/1 INVERTER

RE7117105CHPOULIE 4in x 1/2 Bel x 5/8 sh

2014-05-29Page 1 / 2


Edition

Euroemme fan



50'' fan50" Euroemme fan,1 or 3 speed, belt driven,stainless steel propeller, rear mesh guard, solid galvanized steel shutters with centrifugal opening system.-1 speed motor: 220V , 1 phase, 60Hz, 1HP, 12.8/6.4Amps.-3 speed system: Uses the same electrical input as the 1 speed, but the motor is three phased. A variable frequency drive converts the current from 1 to 3 phases and allows to program 3 (or 2) variable speeds; the drive acts also as a relay and an overload protection.-Air flow at top propeller speed (387 RPM): 22160 cfm @ 0.0"H2O / 19680 cfm @ 0.075"H2O / 18080 cfm @ 0.15"H2O-Galvanized steel housing: 54-5/8" X 54-5/8" X 17-3/4"- 67 Dba

2HBE50CHFAN EM50 1HP 1SPD.

2HBE51-1CHFAN EM50 1HP 3SPD.


Components for 50"

1R1001412CH1HP MOTOR MARATHON1R1001413CH1HP 230/460 3PH MOTOR MARATHON

6BE50-ACHCOMPLETE CENTRIFUGAL SYSTEM

6BE50-BCHCOMPLETE CENTRAL PULLEY6BE50-DCHBELT #13X2240LI (A88)

6BE50-ECHS-STEEL PROPELLER FOR EM50LX139-3CH1HP 220V/1 INVERTER

RE3112104CHPOULIE FIXE 3" X 5/8" CLE 3/16

RE7113104CHAJUSTABLE PULLEY 3" X 5/8

2014-05-29Page 2 / 2


Edition


F 3A

2013-12-18

Ventilateur Euroemme Euroemme fan

CARACTÉRISTIQUES ET AVANTAGES DES VENTILATEURS EUROEMME FEATURES AND ADVANTAGES OF THE EUROEMME FANS Le système centrifuge d'ouverture des volets assure l'efficacité maximum du ventilateur en tout temps

en gardant les volets complètement ouverts.

Lorsque le ventilateur est à l'arrêt, le système de fermeture des volets empêche toute infiltration d'air.

Les volets ne requièrent pas de nettoyage fréquent.

Les volets sont fabriqués en acier galvanisé, plus rigide que l'aluminium ou le plastique.

Le grillage de protection, à l'arrière, s'ouvre en pivotant comme une porte afin de faciliter l'entretien.

L'hélice du ventilateur 50" a été redessinée pour offrir une meilleure efficacité et un plus grand débit d'air. Le profil spécial des pales assure une meilleure résistance aux pressions statiques élevées.

Système centrifuge des volets (ventilateur à l'arrêt) Système centrifuge des volets

(ventilateur en opération)

Centrifugal shutter system (fan is not operating) Centrifugal shutter system

(fan is operating) The centrifugal shutter system keeps the efficiency of the fans at peak all the time by keeping the

shutters fully open.

Shutters are tightly closed when fan is not operating, preventing any air leakage.

Shutters do not need to be cleaned regularly.

Shutters are made of galvanized steel, which is stronger than aluminum and plastic.

The safety mesh on the back opens like a door for easier maintenance and cleaning.

50" fan has a new propeller for higher efficiency and airflow. While keeping the same blade configuration, new blades have a special re-enforced profile for better resistance to high static pressure conditions.


Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 1/1 U:\Catalogue PDF\F_03A.doc

Canarm fan



Direct driveThese fans are sturdily constructed, direct drive, horizontal discharge for industrial, commercial and farm applications. Suitable for general ventilation of factories, garages, warehouses and other commercial and industrial buildings. Sturdily constructed from all-aluminum extrusions.Motors are totally enclosed, ball bearing with thermal protection.

6BE112CHEXHAUST FAN 12"6BE118CHEXHAUST FAN 18"

6BE124CHEXHAUST FAN 24"


Motor

6BE112-ACHREPLACEMENT MOTOR FOR 6BE112

2014-10-30Page 1 / 1


Edition

Section:

Date effective:

F 5A

2014/09/17

Ventilateur Canarm Canarm fan

PCM @ pression statiqueCFM @ static pressure

Modèle Diamètre

lame RPM HP

(monophasé) Voltage

(monophasé) Amps (FLA)

(monophasé) Poids (LBS)

dB(A) @5 pi

Dimension du cadre

Model Blade diameter

RPM HP (single phase)

Voltage (single phase)

Amps (FLA) (single phase)

Weight (LBS)

dB(A) @5 ft

0.00" 0.10" 0.125" Framing dimensions

6BE112 12" 1625 1/4 115 1.8 27 63 1640 1540 1510 14" x 14"

6BE118 18" 1625 1/3 115 4.0 37 73 3200 3090 3040 20" x 20"

6BE124 24" 1100 1/3 115 5.4 45 70 5000 4500 4300 26" x 26"

Autres voltages disponibles, s.v.p. contactez le service technique. Other voltages are available, please contact technical support. Les Industries Harnois Inc., 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2014/09/17

Tel.: 450-756-1041 1-888-HARNOIS Fax.: 450-756-8389 www.harnois.com Page 1/1 U:\Catalogue PDF\F_05A.doc

Residential ventilation



Residential fan"DAYTON" low flow: These fans are specially designed for residential greenhouses. Can be thermostat controlled or by switch.Diam.: 10" - 520 CFM - 1/30 HP - 115 volts 60Hz - 1.4 Amps - 1550 RPMDimension: 10-1/2" x 10-1/2"

8J2C819CHSHUTTER MOUNTED 10 EX. FAN

2014-09-17Page 1 / 1


Edition

Positive pressure fan



Positive pressure kitPositive pressure fan.Includes: Weather hood, fan and poly tube adapter.Volts: 115Amps: 5.8Rpm: 17003H010: 12" (frame: 14" x 14" x 4") for poly tube 18" diam.3H012: 18" (frame: 19-3/4" x 19-3/4" x 4") for poly tube 24" diam.

Static pressure (inch of water) 0.0 0.1 0.125MODEL MOTOR CFM dBA3H010 MARATHON 1/4 1450 1175 1100 633H012 MARATHON 1/4 4300 3100 2900 71

3H010CHPOSITIVE PRESSURE FAN 12"

3H012CHPOSITIVE PRESSURE FAN 18"


HousingPlastic outside wheater hood for 12" and 18" fan.

1P030CHWHITE WEATHER HOOD 22"x 22"

2014-10-29Page 1 / 1


Edition

HAF Canarm



18" HAF fanCanarm's HAF18 horizontal airflow fan is designed to provide gentle circulation of air in greenhouses and other agricultural applications.It features open guard spacing for better air distribution and a hanging bracket, 115V, 8 foot grounded cord & plug included.When suspended, the fan can be rotated up and down and swivel 360° for optimal control of air stream.Suitable for wet locations.

Blade diameter: 18"Motor size: 1/15 HP totally enclosedPhs: 1Volts: 115Amps: 0.9Motor: 1,400 RPMSpeed: VariableCFM: 4,000Shipping weight: 22 lbs

6BE018CHHAF 18 IN CANARN

2014-09-17Page 1 / 1


Edition

Motorized shutter



StandardStandard, attached, opposed with Belimo motorization AFBUP-S, 24a 240VAC.

NOMINAL OPENING CODE DIMENSION REQUIRED6BCT92020 20x20 17-1/2 x 17-1/26BCT93636 36x36 33-1/2 x 33-1/26BCT94848 48x48 45-1/2 x 45-1/2

6BCT92020CHMOTO SHUTTER 9000 20 X 20




Extreme cold temperatureExtreme temperature, attached, opposed with Belimo motorization AFBUP-S, 24a 240VAC.

NOMINAL OPENING CODE DIMENSION REQUIRED6BCTECT2020 20x20 17-1/2 x 17-1/26BCTECT3636 36x36 33-1/2 x 33-1/26BCTECT4848 48x48 45-1/2 x 45-1/2

6BCTECT2020CHMOTO SHUTTER ECT 20 X 20



2014-10-31Page 1 / 1


Edition

Motorized shutter



Motorized shutterMotorized shutter entirely made of aluminium. Including "Multi product" actuator 120 vac/0.5 amp, 60hz. Each blade seal with rubber seal.Motor 110 V.

Code Shutter Opening6BS18 22"x22" 22"x22"6BS24 30"x30" 30"x30"6BS30 36"x36" 36"x36"

6BS18CHMOTORIZED SHUTTER FOR 18"C-FAN

6BS24CHMOTORIZED SHUTTER FOR 24"C-FAN6BS30CHMOTORIZED SHUTTER FOR 30"C-FAN

2013-06-27Page 1 / 1


Edition

Air inlet shutter



Aluminum shutterAluminum shutter without motorization.Open manually or under greenhouse air pressure.

Overall OpeningCode Shutter square required8J4C558 18" 21" 18-1/2" x 18-1/2"8J3C308 24" 27" 24-1/2" x 24-1/2"8J3C309 30" 33" 30-1/2" x 30-1/2"8J3C310 36" 39" 36-1/2" x 36-1/2"8J3C311 42" 45" 42-1/2" x 42-1/2"8J3C312 48" 51" 48-1/2" x 48-1/2"

8J3C308CH24" ALUMINIUM SHUTTER

8J3C309CH30" ALUM. SHUTTER

8J3C310CH36" ALUM. SHUTTER8J3C311CH42" ALUM. SHUTTER

8J3C312CH48" ALUM. SHUTTER8J4C558CH18" ALUMINIUM SHUTTER

2013-10-23Page 1 / 1


Edition

Air inlet shutter



Motorized shutterMotorized shutter.110 volts motor.Can be operated with thermostat.1-1/4" square galvanized steel frame.

Code Frame Nb of motor2HV18 21" x 21" 12HV24-1 27" x 27" 1 2HV30 33" x 33" 1 2HV36 39" x 39" 12HV42 45" x 45" 22HV48 51" x 51" 2

2HV18CHMOTORIZED SHUTTER 18"

2HV24-1CHMOTORIZED SHUTTER 24"2HV30CHMOTORIZED SHUTTER 30"

2HV36CHMOTORIZED SHUTTER 36"2HV42CHMOTORIZED SHUTTER 42"

2HV48CHMOTORIZED SHUTTER 48"


Replacement motorDayton shutter motor only.Volt 120/240Amp. 0.26/0.1560Hz

8J2C904CHLOUVER MOTOR

2013-12-18Page 1 / 2


Edition

Air inlet shutter



Motor and chainMotor rack + chain + roller.Volt 120/240Amp. 0.26/0.1560Hz

2H031CHSHUTTER MOTOR & CHAIN

2013-12-18Page 2 / 2


Edition

HAF fan



18" & 20" HAF fan>>> 18" or 20" circulator according to availability of supplier.High velocity air circulator.3 speeds, 120 volts, 60 Hz, 2.98 amps, 1/4 HPSpeed CFMHigh 5000Medium 4000Low 2800THESE ARE APPROXIMATE VALUES

8J3XJ43-1CH3 SPEED HIGHT VELOCITY 18" FAN

8J3XJ43-2CH3 SPEED HIGHT VELOCITY 20" FAN


12" HAF fanCirculating fan "CANARM".3 speeds, 120 volts, 60 Hz, 0.88 amps, 1/10 HPSpeed CFMHigh 1500Medium 1200Low 800

6BE105CH12" HIGH VELO.FLOOR FAN 3 SPD.

2014-09-17Page 1 / 1


Edition

HAF Schaefer



20" circulating fan"SCHAEFER" circulating fan maintains constant greenhouse temperature. White vinyl housing prevents shadowing, aluminum blade, variable speed motor (control required), moisture resistant. Diam. Rpm/cfm HP Volts AMPS6BC11: 20" 1725/5516 1/3 115/230 3.8/1.9

6BC11CH20"CIRCULATION FAN


12" circulating fan"SCHAEFER" circulating fan maintains constant greenhouse temperature. White vinyl housing prevents shadowing, aluminum blade, variable speed motor (control required), moisture resistant. Diam. Rpm/cfm HP Volts AMPS6BC12: 12" 1725/1554 1/10 115/230 1.3/.65

6BC12CH12" CIRCULATING FAN6BC13CHREPLACEMENT MOTOR FOR 6BC12


Speed controlManual variable speed controls, 115/230 volts.

6BC14CHSPEED CONT SHEAFER 12.5 AMPS

2014-10-29Page 1 / 1


Edition

Section:

Date effective:

F 16A

2014-09-17

Circulation d'air horizontal HAF system

Installation typique Typical installation

1. Ajouter une rangée de circulateurs pour chaque 50 pieds de longueur de serres additionnels. Add a row of fans for each additional 50 ft of greenhouse length.

2. Pour les serres avec 3 baies, l'air des 2

baies extérieures doit se déplacer dans la même direction. Pour les serres avec un nombre impair de baies, l'air des 3 baies centrales doit se déplacer dans la même direction. For greenhouses with 3 bays, air in the 2 outside bays should move in the same direction. For greenhouses with odd numbers of bays, air in the center 3 bays should flow in the same direction.

3. La capacité totale des circulateurs en

pied cube par minute (pcm) doit correspondre au quart du volume d'air des serres. Nous offrons des modèles de 12", 18" et 20". Total fan capacity in cubic feet per minute (cfm) should equal one-fourth the greenhouse volume. We offer 12", 18" and 20" diameter H.A.F.

Disposition pour système de circulation d'air horizontal pour fournir une distribution uniforme de température. Fan layout for horizontal air flow systems to provide uniform temperature distribution. Source: Greenhouse, Engineering 1990 Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-09-17


HAF Eco Fan

Effective date: 2018-04-27Section: F 17


Eco Fan

Horizontal recirculation fans ensure the uniform climate throughout the greenhouse which delivers proven benefits. The movement of air allows the leaves to transpire more easily, thereby preventing overheating and scorch. By promoting healthier growth, air movement also leads to improved disease resistance. The Eco Fan is the ideal solution for either serial or parallel applications.The body is made of a synthetic material, resistant to corrosion in humid climate.>>> Can be hanged by 3 steel cables (not included) or by a bracket (not included).ADVANTAGES:- Optimum price-quality ratio- Efficient ventilation for any crop- Functional design, specifically for horticulture- Very long life- Minimum loss of light due to its compact design- Low noise level: maximum noise level at 6,56' (2 m) distance: 61,2 dB(A)- Low energy consumption: 13.5 cfm/w; 43w(1000m3/h)SPECIFICATIONS:- Weight (excl. grills): 27,56 lbs (12,5 kg)- Length: 9,84" (250 mm)- Inlet side diameter: 22.9" (582 mm)- Outlet side diameter: 18.19" (462 mm)- Permissible ambient temperature: from 32 to 113°F (0 to 45°C)- Required mains frequency: 60 Hz- Ventilation capacity: 2766 cfm (4700 m3/h)- Throw: 131,23' (40 m)- Rpm: 1225 rpm- Mains voltage: 230 V- Maximum current requirement: 0,9 A- Electrical capacity: 205 W- Variable speed control available

8HC50CHGREENHOUSE FAN ECO 220V


Support

2018-05-02

Page 1 / 2



Edition

HAF Eco Fan

Effective date: 2018-04-27Section: F 17

2H6317CH2-1/2 X 12 FAN SUPPORT


FanmasterOne Fanmaster can control a maximum of 12 Eco Fan (#8HC50).

8HC55CHSPEED MASTER 20 AMPS

2018-05-02

Page 2 / 2



Edition

HAF support



Support

1N8000CHGRIPPLE FOR 1/16" WIRE


Stainless steel cable

1N0201-SSPLSSTEEL WIRE 1/16" 7 X 7 S.STEEL

2013-12-18Page 1 / 1


Edition

Vertical fan V-FloFan



V-FloFanON REQUEST ONLY>>> Not UL or CSA approved

With the V-FloFan, Vostermans Ventilation offers the grower the opportunity to reduce the negative impacts, due to humidity, in a simple and energy efficient way. The vertical and horizontal airflows result into an active microclimate on crop level.

The V-FloFan, which is a prerequisite for:- Optimal air distribution in the greenhouse with the purpose to create an optimal climate and crop- To control the humidity level on crop level- Creating an active microclimate on the crop level and leaves- Constant low airspeed in the crop overall- Reduction of the energy costs through vertical airflow with assimilation lighting

The V-FloFan, a recirculation fan with very unique features:- An optimal vertical airflow through a special aerodynamic shaped conical outlet to guide the airflow- The V-FloFan is applicable for several cultivation systems and crops through a conical outlet to guide the airflow- Reduced number of fans per surface-unit in comparison to similar systems- Energy efficient motors/fans, developed and produced according to future directives

6VV16CHGREENHOUSE FAN V-Flo

2014-09-17Page 1 / 1


Edition

Vertical fan Canarm



Vertical air flow fan- Engineered and designed for spacious applications where maximum floor coverage is required- Reversible motor for both winter heat destratification and summer time cooling (#6BE061 required)- Fan is sealed and suitable for high moisture applications- Variable speed motor (all motors are impedance protected, PSC type variable speed with permanently lubricated ball bearing motors) (#6BE061 required)- When used with MC series speed controls (#6BE061) the speed range is infiniteCoverage: Up to 3,000 sq.ft.Fan size: 60"Max RPM: 292Air velocity 5' from fan: 650 ft/minAir delivery @ floor: 46,000 cfmAmps high: 0.84Watts high: 101Down rod length: 16"Shipping weight: 24,65 lbsPower supply: 120VAC

6BE060CHEXHAUST FAN 60" VERTICAL


ControlCONTROL FOR VERTICAL AIR FLOW FAN- A slide switch is provided to change the direction of the fan from updraft to downdraft- Up to 4 fans can operate on a single control- Infinite speed adjustment screw- Minimum speed adjustment screw- Designed to fit a standard 3"x5" electrical box- Mount in a dry location such as the control room- Max # of fans/control: 4- Power supply: 120V/60Hz- Ampere rating: 5.0

6BE061CHSPEED AND ROTATION CONTROL

2014-09-17Page 1 / 1


Edition

Motorization (parts)



Motorization (parts) AFA

1P124-ACHLAFERT MOTOR 1/3HP 230/1/601P124-BCHLIMIT SWITCH 220VAC

1P124-DCHKLIXON POUR 1P124-A

1P124-FCHBEARING SKF #6006-ZZ1P124-GCHBEARING SKF #6203ZZC3

1P124-HCHBEARING SKF #6200-ZZ

1P124-ICHBEARING SKF #6005-2RSC31P124-JCHMETRIC OIL SEAL #562752

1P124-KCHOIL SEAL #6661

1P124-LCHOIL SEAL #97481P124-MCHVK30 X 8 END COVER

1P124-NCHETAIT EN 2010 #28X62X10

1P126-B1CHCAPACITEUR 12.5 MICRO FARAD1P126-CCHMOTOR 1/3HP 220/1/60 Cantoni

1P126-D2CH16KG UNIREX GREASE EP O

1P126-FCHWORM WHEEL FOR 1P126 (BRASS)1P126-GCHWORM SHAFT FOR 1P126

1P126-HCHHELICAL GEAR 15.85 FOR 1P126

1P126-H14CHHELICAL GEAR 14.00 FOR 1P1261P126-ICHPINION FOR 1P126 (PLASTIC)

1P126-JCHDRIVING GEAR FOR 1P1261P126-KCHLIMIT SWITCH WITHOUT RELAYS

1P126-LCHCIRCUIT BREALER RELAY 40 UF

1P126-MCHINTERMEDIARY SHAFT FOR 1P1261P126-NCHDRIVEN GEAR FOR 1P1261P126-OCHSHAFT FOR GEAR BOX (BIG)

1P126-OECHLIM SW NUT BRASS1P126-PCHSNAP RING #S30220 FOR GEAR BOX

1P126-P1CHSNAP RING #S30428 PR GEAR BOX

1P126-P2CHBEARING FOR GEARBOX1P126-P3CHSNAP RING #S33250 FOR GEAR BOX1P126-P4CHSNAP RING FOR GEAR BOX

2015-08-04Page 1 / 2


Edition

Motorization (parts)


1P126-P5CHSNAP RING FOR GEAR BOX1P126-P6CHSNAP RING FOR GEAR BOX INLET1P126-P7CHSNAP RING FOR GEAR BOX EXTERNA

1P126-QCHOIL SEAL FOR GEAR BOX1P126-RCHSHAFT FOR GEAR BOX (SMALL)

1P126-RECCHREBUILT GEARBOX

1P126-SCHOIL SEAL FOR GEAR BOX1P126-SCHIM1CHST.SHIM 46.86MMO.DX 37.22MM ID1P126-SCHIM2CHST.SHIM 29.86MMO.DX 22.22MM ID

1P126-SCHIM3CHST.SHIM 56.86MMO.DX 47.22MM ID1P126-SCHIM4CHST.SHIM 56.86MMO.DX 47.22MM ID

1P126-SCHIM5CHST.SHIM 39.86MMO.DX 32.22MM ID

1P126-TCHOIL SEAL FOR GEAR BOX1P128-ACHMOTOR ONLY .5HP 220V 1PH1P128-BCHCAPACITOR FR MOTOR 20 UF1P128-B1CHCAPACITOR FR MOTOR 40 UF

1P129CHLIMIT SWITCH FOR RACK


Motorization (parts) Woosung

1P127-1BCHREPLACEMENT MOTOR FOR 1P127-1

1P127-2CHELECTRIC ROLL UP 1/10HP ERU-B21P127-4CHROLLER GUIDE

1P127-BCHREPLACEMENT MOTOR FOR 1P1271P127-CCHADAPTOR FOR 1P127-1

1P127-DCHADAPTOR FOR 1P127-2

2015-08-04Page 2 / 2


Edition

Motorization



MotorizationGearmotor 24 volts D.C., 0.1 HP. 3,6 RPM, integrated limit switches (60 turns maximum adjustment); opening roll-up of 60" height in 3 minutes. Torque of 440 lbs in., or 50 Newton meter. Starter reverser converter included, power inlet 110 or 220 VAC 0.6/.03 amp. Inside or outside installation, for all roll-up.

1P127-2CHMOTOREDUCTEUR 1/10HP EUR-B2

3H2056CH0-200 NORD-OVAL ROLL-UP MOTORI3H2083CHMOTOR 24 VDC

3H2087CHAFA REPLACEMENT

3H2088CHAFA REPLACEMENT / 200

2014-03-10Page 1 / 1


Edition

Ridder motorization



MotorizationsThe motor gearboxes are maintenance-free, compact power units for driving ventilation, screen and flap ventilation systems in greenhouses and livestock sheds.

All motor gearboxes feature a self-braking worm gear transmission. This transmission ensures that the output shaft is braked when the drive unit is stopped. The combination of carefully matched pinion and worm reductions results in a very quiet mechanical transmission.

The motor gearboxes feature a patented integrated linear limit switch system with duty and safety switches having excellent switching precision. The maximum switching range of the limit switch system equates to 97 revolutions of the drive shaft. By using a potentiometer with the optional built-in set, it is possible to precisely feed back the positions of a drive system to a (climate) computer.

The motor gearboxes are finished with a graphite grey powder coating and are supplied including fixing bolts and spring washers.

RW04501CHRW045/1.2/115/1HPRW04502CHRW045/1.2/240/1HP

RW04503CHRW045/1.2/208/3PHRW04504CHRW45-3-09\208-480\3\C\97

RW04505CHRW045/5/240/1HP

RW20001CHRW200/41/208/3PHRW24101CHRW241/1.2/115/1HP

RW24102CHRW241/1.0/240/1PH

RW24103CHRW241/1.0/208/3PHRW24201CHRW242-18/220-240/1/86

RW24201GRCHRW242-18/220-240/1/86 GREASE

RW24301CHRW243/3.0/240/1PHRW24302CHRW243/3.0/208/3PH

RW40101CHRW401/1.0/115/1PH

RW40102CHRW401/1.0/208/3PHRW40201CHRW402/2.0/240/1HP

RW402MXCHRW402-25\208-480\3\C\86


2015-06-02Page 1 / 4


Edition

Ridder motorization


RW403EUCHRW403-37\208-480\3\C\86RW403UNICHRW403-37\400-450\3\86\V\CHRW40501CHRW405/6.0/208/3PH



Parts

RW045/200+1KPOTCHPOTENTIOMETER R1K\S10

RW045/200+PINIONCHPOT.METER PINION Z8RW04501-ACHREDUCED GASKET

RW04501-BCHMOTOR GASKET

RW04501-CCHBELTRW04501-DCHPIGNON

RW04501-ECHOIL SEAL FOR RW45

RW045POTSETCHPOTMETER BUILT-IN SET RW45RW200+POTSETCHPOTMETER BUILT IN SET RW400

RW24101-DCHGEAR FOR 502330 #48-103

RW24101-ECHPLASTIC PINION #103 TEETHRW24201-ACHGASKET REDUCER FOR RW242

RW24201-BCHGASKET MOTOR FOR RW242

RW24201-CCHBELT FOR RW242RW24201-DCHPLASTIC PINION #48-87 TEETH

RW24201-ECHPLASTIC PINION #103 TEETHRW24301-DCHPLASTIC PINION #48-49 TEETH

RW40201-1CHREPLACEMENT MOTOR FOR RW40201

RW40201-BCHGASKET MOTOR FOR RW40342RW403UNI-MOTCHREPLACEMENT MOTOR FOR RW403UNIRWRP001CHSTARTING RELAY 95-254V 50/60HZ

RWRP002CHCAP 20 UFRWRP003CHCAP 80 UF

RWRP004CHCAPACITOR 8UF/400/450/50/60

RWRP005CHCAPACITOR 30UF/260/50/60/SDRWRP006CHEND CYCLE SCREW M4 X 8RWRP007CHEND CYCLE SCREW M4 X 16

2015-06-02Page 2 / 4


Edition

Ridder motorization


RWRP008CHMOTOR Y575 0.44KW 3PHRWRP009CH037Kw 1800Rpm 230/460 3phRWRP010CHBUTTOM GEAR 400 LS

RWRP011CHBELT 400 LSRWRPUCHRIDDER POSITIONNING UNIT


Tools

1N600CHTORQUE WRENCH 1/4 DRIVE

1N601CHSOCKET 9/16" 1/4" DRIVE1N602CHALLEN KEY 4MM 1/4"DRIVE

1N604CH4" SCREW DRIVER FLAT HEAD 3/16


Synthetic greaseGrease for rack and pinionWhite grease, base of lithium and zinc oxide.- Stability at high and low temperature- Resistant to extreme temperatures (-40ºC/-40ºF to 260ºC/500ºF)- Resistant to rust and corrosion- Reduces wear caused by metal-to-metal contact

6D025-1CHSYNTHETIC GREASE 14 oz


"Unirex" greaseGrease for gearbox RW045

RW045GRCHGREASE UNIREX EP-0 BARIL 16KG

2015-06-02Page 3 / 4


Edition

Ridder motorization



Power roller Ridder

RWPR001CHRPR100-4-30\400\3\43\GCRWPR002CHTUBE RPR-H2900-X150-OB

RWPR003CHMOUNTING BRACKET RPR-UM-WC

RWPR004CHCABLE CARRIER VK16-P20-L1000-BRWPR005CHMOUNTING SET CABEL PROT.RPR100

RWPR006CHRPR-GC SET-4M

RWPR007CHCOUNTER WEIGHT RPR-GC-10.5KGRWPR008CHRETURN PULLEY UNIT RPR-GC

RWPR009CHCABLE TREE RPR-3F+ES-L4000

RWPR010CHMOUNTING BRACKET RPR-BBRWPR011CHCOUPLING WB35-P20-L102-M8-A-GC

RWPR012CHCOUPLING WB35-P20-L102-M8-AL

RWPR013CHMOUNTING BRACKET RPR TOP FIXRWPR014CHREPLACEMENT MOTOR FOR P.ROLLER

RWPR015CHGASKET MOTOR POWER ROLLER

2015-06-02Page 4 / 4


Edition


F 25A

2014-11-03

Motorisation Ridder Ridder Motorization

Spécifications Specifications

Code "Varnet" Art. No. Description

M (N

m) –

60

Hz

n (/m

in) –

60

Hz

Volt Amps

Puis

sanc

e K

m

Pow

er K

w

Phas

e

CSA m (Kg)

RW04501 502035 RW45-1-09\110-115\1\60\C\97 120 1,2 115 2.2 0.09 1 16,5

RW04502 502005 RW45-1-09\220-240\1\C\P\97 120 1,2 220/240 1.1 0.09 1 16,5

RW04503 535200 RW45-1-29\208-480\3\C\97 120 1,2 200-277 380-480

0.60 0.55 0.09 3 16,5

RW04504 535260 RW45-3-09\208-480\3\C\97 120 3.6 200-277 380-480

0.8 0.5 0.11 3 16.5

RW04505 502040 RW45-3-09\220-240\1\97 80 3.6 220-240 0.9 0.11 1 16.5

RW20001 535950 RW200-34-150\208-480\3\C\860 200 41 200-277 280-440

0.65 0.65 1.8 3 38

RW24101 502334 RW241-09\110-115\1\60\C\86 200 1,2 115 2.2 0.09 1 29,0

RW24102 502330 RW241-09\220-240\1\86 240 1,2 220/240 1.1 0.09 1 28,5

RW24103 535400 RW241-09\208-480\3\C\86 240 1,2 200-277 380-480

0.48 0.46 0.14 3 30,0

RW24201 532406 RW242-18\220-240\1\86 240 2,4 220-240 2.8 0.22 1 31,0

RW24201GR 532406 RW242-18\220-240\1\86 240 2,4 220-240 2.8 0.22 1 31,0

RW24301 502340 RW243-25\220-240\1\OC\C\86 240 3,6 220/240 0.9 0.30 1 32,0

RW24302 535460 RW243-25\208-480\3\C\86 240 3,6 200-277 380-480 0.6 0.30 3 32,0

RW40101 502206 RW401-18\115\1\60\86\C 400 1,2 115 0.85 0.18 1 31,0

RW40102 535600 RW401-12\208-480\3\C\86 400 1,2 200-277 380-480

0.48 0.46 0.14 3 30,0

RW40201 533411 RW402-25\220-240\1\OC\C\86 400 2,4 220/240 0.9 0.30 1 31,5

RW402MX 535630 RW402-25\208-480\3\C\86 400 2,4 200-277 380-480 0.6 0.30 3 31,0

RW40301 502240 RW403-37\220-240\1\OC\86 400 3,6 220/240 0.98 0.44 1 33,0

RW40302 502210 RW403-37\400-450\3\86 400 3,6 260/450 1.8/1.1 0.42 3 31,0

RW403EU 535660 RW403-37/208-480/3/C/86 400 3,6 200-277 380-480 1.4 0.44 3 32.0

RW403UNI 502233 RW403-37/400/3/86 400 3,6 50hz: 230/400 1.87/1.08 0.37

3 32.0 60hz: 260/450 1.73/1.00 0.42

RW40501 535690 RW405-55\208-480\3\C\86 400 6,0 200-277 380-480 0.6 0.66 3 34,5

RW60301 502440 RW603-55\220-240\1\OC\C\86 600 3,6 220-240 0.8 0.66 1 40,0

RW60302 535750 RW603-55\208-480\3\C\86 600 3,6 200-277 380-480 0.6 0.66 3 36,5

Nordique NG M:\Serpack\Nordique NG\Motorisation\Ventilation.pdf Ovaltech (dernier onglet/last tab) M:\Serpack\Ovaltech\SELECTION SERPACK 2008.xls Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-11-03


Hand crank



Hand crank for roofManual vent operator including support, gear and shaft coupling.See table (page F-27A).

2H6409CHMANUAL OPENING UNIT 9' CHAIN2H6413CHMANUAL OPENING UNIT 13' CHAIN

2H6418CHMANUAL OPENING UNIT 18' CHAIN


Hand crank for roll-upManual crank. It has a reduction ratio of 5.5: 1 with an integrated self-blocking mechanism that makes it very safe to use. For roll-up tube 1" and 1-1/4". 200 feet maximum.

1P1020CHHANDCRANK 5.5:1

2013-12-18Page 1 / 1


Edition

Section:

Date effective:

F 27A

2013-12-18

Manivelle pour toiture Hand crank for roof

Commande manuelle Manual vent

Nordique NG Hauteur sous

gouttière Height under

gutter 21'4" 24' 25' 28' 30' 31'6"

VENTILATION GOUTTIÈRE

GUTTER

VENTILATION

10' 2H6409 2H6409 2H6409 2H6409 2H6409 2H6409

12' 2H6413 2H6413 2H6413 2H6413 2H6413 2H6413

14' 2H6413 2H6413 2H6413 2H6413 2H6413 2H6413

16' 2H6418 2H6418 2H6418 2H6418 2H6418 2H6418

VENTILATION MI-TOITURE

HALF-ROOF VENT

10' 2H6409 2H6409 2H6409 2H6409 2H6409 2H6409

12' 2H6413 2H6413 2H6413 2H6413 2H6413 2H6413

14' 2H6413 2H6413 2H6413 2H6413 2H6413 2H6413

16' 2H6418 2H6418 2H6418 2H6418 2H6418 2H6418

VENTILATION PANNEAU PAPILLON

RIDGE VENT PANEL

10' 2H6413 2H6413 2H6413 2H6413 2H6413 2H6413

12' 2H6413 2H6413 2H6413 2H6418 2H6418 2H6418

14' 2H6418 2H6418 2H6418 2H6418 2H6418 2H6418

16' 2H6418 2H6418 2H6418 2H6418 2H6418 2H6418

Ovaltech III 25' 30' 32' 35' 40'

VENTILATION MI-TOITURE

HALF-ROOF VENT

2H6409 2H6409 2H6409

VENTILATION PANNEAU PAPILLON

RIDGE VENT PANEL

2H6413 2H6413 2H6413 2H6413



Circulating tube



4 mil. circulating tubePoly 0.004 UV treated 4 years.Tubes sold by foot (small quantities)

For codes ending by -LB.Tubes sold per roll - price per pound.6E2505-LB:roll 24 pds=1000' approx.(most be sold by multiple of 24 pds only)6E2508-LB:roll 40 pds=1000' approx.(most be sold by multiple of 40 pds only)6E2512-LB:roll 61 pds=1000' approx.(most be sold by multiple of 61 pds only)6E2514-LB:roll 70 pds=1000' approx.(most be sold by multiple of 70 pds only)6E2518-LB:roll 68 pds= 750' approx.(most be sold by multiple of 68 pds only)6E2524-LB:roll 62 pds= 500' approx.(most be sold by multiple of 62 pds only)6E2530-LB:roll 56 pds= 350' approx.(most be sold by multiple of 56 pds only)

6E2505PLSPOLY TUBE 4MIL 4-3/4" DIAM.

6E2505-LBLBSPOLY TUBE 4MIL 4-3/4 DIAM.6E2508PLSPOLY TUBE 4MIL FOR 8"DIAM.

6E2508-LBLBSPOLY TUBE 4MIL 8" DIAM.6E2510PLSPOLY TUBE 4MIL 10"DIAM.

6E2512PLSPOLY TUBE 4MIL FOR 12"DIAM.6E2512-LBLBSPOLY TUBE 4MIL 12" DIAM.6E2514PLSPOLY TUBE 4MIL FOR 14"DIAM.

6E2514-LBLBSPOLY TUBE 4MIL 14" DIAM.

6E2518PLSPOLY TUBE 4MIL FOR 18"DIAM.6E2518-LBLBSPOLY TUBE 4MIL 18" DIAM.

6E2524PLSPOLY TUBE 4MIL FOR 24"DIAM.6E2524-LBLBSPOLY TUBE 4MIL 24" DIAM.6E2530PLSPOLY TUBE 4MIL FOR 32"DIAM.

6E2530-LBLBSPOLY TUBE 4MIL 32" DIAM.


6 mil. circulating tubePoly 0.006 UV treated.

2014-02-07Page 1 / 2


Edition

Circulating tube


6E2612-NOIRPLSPOLY TUBE 6MIL NOIR 12"DIAM.


Poly vent supportPoly tubing support.To install at every 8 to 10 feet.

6E3005CHHANGING SUPPORT FOR 12"DIAM.

6E3006CHHANGING SUPPORT FOR 18"DIAM.

6E3007CHHANGING SUPPORT FOR 24"DIAM.6E3008CHHANGING SUPPORT FOR 30"DIAM.


Accessories

6E3010CHRESEALABLE BEADED TIES

6E3011CHOEILLET DE RECHANGE

2014-02-07Page 2 / 2


Edition

Section:

Date effective:

F 38A

2014-09-17

Tube de circulation Circulating tube

Fiche technique Technical data

TROUS HOLES

C.F.M. à 0.15" C.F.M. at 0.15"

1"Ø 6 1 1/2"Ø 12 2"Ø 21 2 1/4"Ø 28 2 1/2"Ø 35 DESSIN / DRAWING 1 Support de tube, sangle / Tube support batten 2 3/4"Ø 41 3"Ø 52 DESSIN / DRAWING 2 Crampe de plastique et crochet / Plastic clips and hooks

TUBES CIRCULATION CIRCULATING TUBES

Ø Espacement des supports / Supports spacing 10" - 12" - 18" aux/at 10'

20" - 24" aux/at 8' 30" aux/at 6'

PERÇAGE DES TUBES DE CIRCULATION / LONGUEUR TUBE À PERCER DRILLING OF CIRCULATING TUBES / TUBE LENGTH TO DRILLED

50' 75' 100' 125'

Ø

TROUS HOLES

ESP. PCM CFM

TROUSHOLES

ESP. PCM CFM

TROUSHOLES

ESP. PCM CFM

TROUS HOLES ESP. PCM

CFM

Circulateur #1 - 2600 PCM/CFM 18"Ø Moteur / Motor 1/4 HP

2 3/4" Ø

24" c/c

2050

2 3/4" Ø

36" c/c

2050

2 3/4" Ø

48" c/c

2050 - - - Tube

18"Ø


- - - - - - 2 3/4" Ø

24" c/c

4100

3" Ø

36" c/c

4264

Tube 24"Ø


- - - - - - 3" Ø

24" c/c

5200

2 3/4" Ø

24" c/c

5084

Tube 24"Ø


- - - - - - - - - 2 3/4" Ø

24" c/c

5084

Tube 30"Ø

150' 175' 200'

Ø

TROUS HOLES

ESP. PCM CFM

TROUSHOLES

ESP. PCM CFM

TROUSHOLES

ESP. PCM CFM


- - - - - - - - - Tube 18"Ø


2 3/4" Ø

36" c/c

4100

2 1/2" Ø

36" c/c

4060

2 3/4" Ø

48" c/c

4100

Tube 24"Ø


3" Ø

36" c/c

5200

2 3/4" Ø

36" c/c

4756

3" Ø

48" c/c

5200

Tube 24"Ø


2 3/4" Ø

24" c/c

6150

3" Ø

36" c/c

6032

2 3/4" Ø

36" c/c

5412

Tube 30"Ø

CHARTE DES TUBES DÉCENTRÉS / CHART FOR OFF CENTER TUBES Tube 12" et/and 14" décentré de 3" off center 18" décentré de 5" off center 24" décentré de 7" off center 30" décentré de 9" off center



Section:

Date effective:

F 38A

2014-09-17

Tube de circulation Circulating tube

Fiche technique Technical data

TUBES DE CHAUFFAGE / HEATING TUBES 1. Déterminer le nombre total de PCM par unité de chauffage.

Find total CFM per heating unit.

BTU = TOTAL

Fournaise à air chaud Oil heating system

100,000 BTU = 1,150 PCM/CFM 160,000 BTU = 1,800 PCM/CFM

100 PCM/CFM 275,000 BTU = 3,000 PCM/CFM ou / or BTU = PCM/CFM autres / others 100

2. Déterminer le nombre de tube et leur diamètre. Find how many tubes and their diameter.

PCM/CFM MAX./TUBE* TOTAL PCM PCM PCM MAX. Ø TUBE 0-100' 150' 200' TOTAL CFM = CFM MAX. CFM 12"Ø 470 380 330 NB TUBE TUBE TUBE 14"Ø 710 570 490 18"Ø 1,400 1,125 950 24"Ø 2,950 2,375 2,050 30"Ø 5,400 4,250 3,700 *POUR UNE PERTE MAXIMALE EN FRICTION DE 0.05" TOTAL

*FOR 0.05" MAXIMUM TOTAL PRESSURE LOSS

3. Déterminer le diamètre et l'espacement des trous à 60%*. Figure diameter and holes spacing for 60%*.

*NOUS PERÇONS LES TUBES À 60% DE LA CAPACITÉ (PCM TOTAL) LE RESTE DOIT ÊTRE CALIBRÉ CHEZ LE CLIENT. *WE PUNCH HOLES ONLY 60% TOTAL CAPACITY, GROWER WILL CALIBRATE AND PUNCH OTHER ONES.

PCM/CFM X .60% = NB trous / NB holes TUBE PCM/trous / CFM/holes Espacements possibles Spacings available 12", 18", 24", 30", 36", 42" Nb trous / Nb holes X = Espacement des trous 48", 60", 72", 84", 96" 2 Longueur/Length Holes spacing

SPECIAL OU / OR

12" 14" PREMIER

FIRST 1/3 SANS TROU WITHOUT HOLE

Ø DEUXIÈME SECOND 1/3 1" DIAM. 36"

1/3 x 1/3 x 1/3 DERNIER LAST 1/3 1" DIAM. 18"



Climate control



Heating-VentilationSingle-stage thermostat "WADSWORTH"- One stage for heating or cooling- NEMA 4X enclosure- Robust, weather resistant housing- Corrosion resistant materials for long life- Low mass, high surface area of stainless steel coiled sensor provides rapid response to temperature change- UL listed and CSA certified- Temperature range from: 40° to 110°F (4° to 43°C)

6CT631A1CHSINGLE-STAGE THERMOSTAT


Heating-VentilationTwo-stage thermostat "WADSWORTH"- Two stages for heating or cooling- Robust, raintight, weatherproof control- Corrosion resistant materials for long life- High level of accuracy and sensitivity- UL listed, CSA NEMA 4X and N.E.C. (National electric code)- Features 2 SPDT staged switches to support a variety of applications- Temperature range from: 40° to 100°F (4° to 37°C)

6CT631B1CHDOUBLE-STAGE THERMOSTAT

2013-12-18Page 1 / 1


Edition

Harnois TC4 climate control



TC4 controllerTHIS BASIC UNIT ALLOWS FOR 2 CONTROL STAGES:1 natural ventilation stage +1 heating stage or mechanical ventilation stage

FEATURES:-Controllers developed specifically for greenhouse applications, by Harnois Industries-Available in English or French versions-Choice of readings in °C or °F-2 integrated levels of alarm-An interior thermal sensor mounted on a 12" wire is included; possibility of linking 3 others until 150m from the controller-Protection against current and voltage overloads-Recording of minimum and maximum conditions read, for future reference-Integrated time setting for the steps of ventilation-Intelligent system: no possible conflicts between programmed temperatures-User-friendly: digital readings and brilliant witnesses to indicate the system's state

OPTION:Small naturally ventilated cage (2H6284) to put 1 or 2 thermal sensors inside so that temperature readings will not be influenced by sunlight.

2H6284CHNATURALY VENTILATED CAGE

6CT020CHNATURAL VENT/HEAT.TC4 FRENCH6CT021CHNATURAL VENT/HEAT.TC4 ENGLISH6CT030CHNATURAL VENTILATION'S PROBE18"

2013-12-18Page 1 / 1


Edition

Section:

Date effective:

F 41A

2014-01-20

Climate control

Harnois "Envirotrol" TC-4 & TC-7 Harnois climate controllers are electronic units used to automatically control greenhouse ventilation and heating equipments, according to measured temperature (or humidity) and chosen targets. The way it works (simplified): 1 to 4 thermal sensors are mounted in the greenhouse. The controller reads them, calculates the mean temperature of the greenhouse (Tg), and compares it to the programmed target temperature (Tt).

If : (Tg) (Tt + a certain offset) Ventilation stage activated If : (Tg) (Tt - a certain offset) Heating stage activated THE DIFFERENT POSSIBLE STAGES: Heating stage

Low temperature Activation of main heating system

Temperature rises and is OK Main heating system stops

If there is a second heating stage, this one starts when the first stage isn't sufficient to rise the temperature. At that moment, the secondary heating system is activated, then stopped, by the second stage. Mechanical ventilation stage

High temperature Activation of main fan(s)

Temperature lowers and is OK

Main fan(s) stop If there is a second mechanical ventilation stage, this one starts when the first stage isn't enough to lower the temperature. At that moment, the secondary fan(s) is activated, then stopped, by the second stage. Furthermore, when the greenhouse doesn't need to be cooled, a periodic on/off fan cycle can be programmed to control humidity and insure sufficient fresh air intake. Natural ventilation stage This stage behaves like the mechanical ventilation stage, except that it is used to control the opening and closing of the air inlet panels by the motorization. This opening/closing is done gradually, by increments. First, the controller commands the start of the motorization for a few seconds, followed by a stop and wait period; then the controller reads the greenhouse temperature and repeats the cycle one way or the other, according to need.

The 1st natural ventilation stage controls the roof opening. The 2nd natural ventilation stage controls the side roll-ups.

REM : For all stages, every working parameter is independently adjustable, in either to obtain the optimal

functioning strategy, as desired by the grower. Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-01-20





TC7 controllerCONTROLLER TYPE TC7 allows a multiple control of the temperature (and of the humidity when provided with an humidity probe #6CT035). The controller offers 3 groups of controls: 1 or 2 heating steps + 2 natural ventilation steps + 2 mechanical ventilation steps

CHARACTERISTICS:-Controller specially designed for the greenhouse, by Industries Harnois;-Available in English or French version;-Range and temperature differentials fully adjustable for every group of steps;-Limitation of opening according to outside temperature during the cold season;-Choice of reading in °C or in °F;-2 integrated contacts of alarm;-A probe on 12" wire for internal temperature and an outside temperature probe are included, possibility of linking 3 others up to 150m from the controller;-Electricity overload protection;-Contact for emergency closing of natural ventilation by an outside action;-Recording of read minimal and maximal conditions, for following consultation;-Integrated time setting for the steps of mechanical and natural ventilation;-Intelligent system: no possible conflicts between scheduled temperatures;-Friendly system: digital display and brilliant witnesses indicating status of the system;

OPTIONS:-Small cage with natural ventilation (2H6284) to accommodate in it 1 or 2 probes of temperature, so that their readings are not falsified by the sun heating;-Probe for humidity control.-Adding a photoelectric cell allows to schedule day and night different settings. A progressive transition (programmable from 1 to 240 minutes) between settings is done by the controller.

2H6284CHNATURALY VENTILATED CAGE6CT027-1CHHARNOIS TC-7 CONTROLLER FRENCH

6CT028-1CHHARNOIS TC7 CONTROLLER ENGLISH6CT030CHNATURAL VENTILATION'S PROBE18"6CT031CHCONTROLLER TC5/TC7 PHOTOCELL

6CT035CHHUMIDITY PROBE FOR TC7

2013-10-23Page 1 / 2


Edition




Replacement partsThe electronic humidity sensor included with the TC7 contains precision parts that must be replaced periodically, to keep the sensor running properly.

6CT036 - Replacement filter:The original filter must be replaced every 6 months.Sold in packs of 2.

6CT037 - Memory chip, sensitive element and filter:The electronic memory chip and the humidity detection sensitive element must be replaced every 24 months. Comes with a replacement filter.

6CT036CHFILTER KIT FOR HUMIDITY SENSOR

6CT037CHREPLACEMENT KIT_PROBE_HS-100

2013-10-23Page 2 / 2


Edition

Harnois climate control



Naturally vented cageThis cage protects the thermal sensors of the ENVIROTROL family. This protection is necessary to obtain true temperature readings, knowing that sunrays can heat up the sensors. Therefore, it is strongly recommended to offer this cage with every ENVIROTROL sold, which can protect one or two sensors. The user has the responsibility to place the cage in a strategic place.

We recommend installing 2 sensors in one cage, in either to have a backup in case of failure.

This cage requires no electrical input.

2H6284CHNATURALY VENTILATED CAGE

2015-07-30Page 1 / 1


Edition

iGrow 1400 climate control



iGrow 1400HEATING/COOLING- Up to 12 stages of heating and cooling control- Heating and cooling stages are programmable- Programmables stage overrides (1 time only or every day)- Stage separation programmable to 0.1 degree- 4 setpoint time periods each with ramping option- Setpoint time periods are astronomically adjustableHUMIDITY CONTROL- Flexible dehumidification & humidification control * 2 stages of dehumidification for outside temp above threshold * 1 stage of dehumidification for outside temp below threshold * Heat boost option * Cycle timing option * 1 stage of humidificationEQUIPMENT CONTROLLED- Controls the following type of equipment: * On/off devices (e.g. fan, HAF, heat/cool pad, etc.) * Reversing vent motors (wind/rain overrides) * Reversing curtain motors - Shade and energy control - Light, time, and temperature based - Thermal blanket shock protection * Irrigation control valves - Scheduled (14-days schedule with up to 6 start times per day) - Trigger options (accumulated light, start pulse) - Misting/fogging control with humidity overrides * Mixing valve * Bottom heat (up to 5 independent zones) * CO2 pumps - CO2 threshold subject to light conditions, time of day, temperature state * HID lights- Programmable individual equipment overrides (1 time only or everyday)

6CT100ACHIGROW1400+SENSOR T-H ENGLISH

6CT100FCHIGROW1400+SENSOR T-H FRENCH

2013-10-28Page 1 / 3


Edition




1400 weather station- Temperature sensor- Solar sensor, wind speed sensor- Wind direction sensor- Rain sensor, junction box- Cable and pole not included

6CT110CHWEATHER STATION T/S/WS/WD/R


1400 accessories

6CT100-1CHKEYPAD SCREEN FOR 14006CT113CHHOT WATER TEMPERATURE SENSOR

6CT114CHTEMP SENS AIR ANALO IGROW1400

6CT115CHLIGHT SENSOR W/M2-KLUX6CT118CHMAIN PC BOARD FOR 1400

6CT119ACHRABBIT FOR 1400 A6CT119FCHRABBIT FOR 1400 F6CT120CHENVIRONMENTAL CONTROL SOFTWARE

6CT130CHCO2 MONITOR 0-2000 PPM6CT140CHUSB TO SERAIL CONVERTER RS-232

6CT199CHSOIL MOISTURE 3-5VOLTS


"Vaisala" CO2 sensor

2013-10-28Page 2 / 3


Edition



6CT131CHCO2 MONITOR 0-3000 PPM6CT131ACHCOMMUNICATION CALBE 6CT1316CT132CHFILTER

6CT133CHSENSOR ELEMENT6CT134CHCALIBRATION

6CT135CHPOWER SUPPLY 24V DR-15-24

2013-10-28Page 3 / 3


Edition

Electrical components



Controls & components

2H6243-RCHMAGNETIC STARTER 24VDC2H6243-RACHUNIVERSAL CONTROLLER

2H6243-RB-1CHCROSSBOW INCLINOMETER

2H6243-RCCH2-3/4"X4-3/4"X 1/16"ALUM.PLATE2H6243-SCHMAGNETIC STARTER 24VDC GHSE

2H6281CHTRANSMITTER SUPPORT

2H6282CHREFLECTOR SUPPORT2H6283CHSNOW LEVEL SENSOR BASE

6CT200CHWATER PROBE 4-20MA DECAG. 10CM

8HC700CHOPACITY ISOLATED REPEATOR8HC701CHREPEATER CORDLESS

8HC703CH5 METER WIRE FOR ANTENNA

8HC805CHTRANSDUCER 0-10VDC/135 OHM8HC806CHTRANSDUCER 0-10VDC/ON-OFF

8HC807CHANALOG OUTPUT CHP TE IC DA8408

8HC808CHANALOG DRIVER TE IC TLC277CP8XD001220CH8 PINS ROUND 240VAC 2P2T RELAY

8ZB005CHTOGGLE SWITCH DPDT 10A/250VTS

8ZB006CHSWITCH PROTETOR8ZB007CHTOGGLE SWITCH DPDT

8ZB009CHTRANSFO 50VA 240/24VCA8ZB010CHTRANSFO 150VA 120/24VCA

8ZB011CHTRANSFO 750VA 480/240 FER

8ZB012CHTRANSFO 1KVA 480/240 60HZ8ZB013CHBOX FOR TRANSFO 750VAC8ZB016CHTRANSFO 750VA 240/240 OPEN

8ZD001CH8 PINS ROUND 24VAC 2P2T RELAY8ZD002CH8 PINS ROUND 2P2T 120VAC RELAY

8ZD005CHBASE FOR 8 PINS ROUND RELAY

8ZD009CH24+120VAC 8 PINS ROUND TIMER8ZD012CHDOUBLE TIMER OMERON DC248ZD012-1CHDOUBLE TIMER OMERON DC24

2015-06-02Page 1 / 7


Edition



8ZD020CH24-240VAC MULTI-FONCTION TIMER8ZD026CHMAGIC EYE # K4121C708ZD101-1CHTRACK DIM 1 METER

8ZD122CH2P2T 24VAC "ICE CUBE" RELAY8ZD1221CHBASE FOR RELAY "ICE CUBE" 2P2T

8ZD142CH"ICE CUBE" REALY 4P2T 24VAC

8ZD1421CHBASE FOR RELAY "ICE CUBE" 4P2T8ZD175CHFUSE HOLDER # 0115657258ZD176CHFUSES GMA 1 AMP 5/BOX 5 X 20MM

8ZD177CHFUSES GMA 2 AMP 5/BOX 5 X 20MM8ZD178CHFUSES GMA 4 AMP 5/BOX 5 X 20MM

8ZD179CHFUSES GMA 6 AMP 5/BOX 5 X 20MM

8ZD185CHFUSE 1 AMPERE GgM18ZD200CHTERMINAL IDENTIFICATION8ZD201CHTWO LEVEL TERMINAL8ZD203CHONE LEVEL TERMINAL

8ZD204CHEND PLATE FOR TERMINAL 1 LEVEL

8ZD205CHEND BRAKET FOR TERMINAL8ZD206CHJUMPER FOR TERMINAL

8ZD305CHFUSE HOLDER8ZD310CHFUSE AT 05 (5 AMPS)8ZD311CHFUSE BREAKER AT 10 AMPERES

8ZD315CHFUSE AT 01 (1 AMP)

8ZD320CHIGNITION SWITCH8ZD325CH"ICE CUBE" RELAY 2P2T 12VDC

8ZD400CH1P1T 24VAC RELAY8ZD400TCHMINUTE RELAY 1P1T 24 VAC8ZD401CHBASE FOR RELAY 1P1T

8ZD402CH"ICE CUBE" RELAY 4P2T 120VAC

8ZD403CH"ICE CUBE" RELAY 2P2T 120VAC8ZD404CHRELAY AUTO OFF-ON 1P2T 24VAC

2015-06-02Page 2 / 7


Edition




Soil moisture sensor4-20 mA 5cm soil moisture sensor for Maximizer.This sensor is used to get the water content of a substrate. Gives a value to the controller between 0 and 100% depending on the humidity of the substrate. Can replace a tensiometer, is much cheaper and less fragile (on the other side, the tensiometer gives a voltage reading).Type: Volumetric water content (VWC)Accuracy: +/-6% VWC with generic calibration for supported growing media up to 65% VWCOutput: 4-20 mA current proportional to VWCOperating environment temperature: -40 to 80°CPhysical properties dimensions: 8,9 cm x 1.8 cm x 0.7 cmCable: 2 m or 5 m, 3 wire (22 AWG) (American wire gauge)

6CT202CHWATER PROBE 4-20MA 5CM


Tensiometer Instrument used to check the quantity of water available for your plants in the

soil. It measures the energy or force it takes to roots to remove water retained by soil particles.

6CT203CHSOIL MOISTURE SENSOR 4-20MA


Electronic control

8ZE301CHTRANSMITTER #MS-121

8ZE301-ACHBRASS ADAPTOR8ZE302CHPOWER SUPPL. #EASY200-POW

2015-06-02Page 3 / 7


Edition



8ZE303CHDUST FILTER & PLASTIC GUARD8ZE600-CCHCONTROL PANEL KEYPAD + POT.8ZE600-DCHREMOTE KIT

8ZE603CHDRIVE 2 HP 3/3 4608ZE603-ACHKIT 1P21 M2

8ZE604CHVLT MICRO DRIVE 5HP 480VAC 3HP

8ZE604-ACHKIT 1P21 M38ZE605CHDRIVE 2HP 3/3 2308ZE606CHDRIVE 1HP 1 PHASE 230V

8ZE640CHCONVERTER USB TO RS-4858ZE731CHELECTRONIC ALARM 6-28VDC


Electrical wires

8ZX14-BLANCMWHITE 14GA TEW ELECTRIC WIRE

8ZX14-BLEUMBLUE 14GA TEW ELECTRIC WIRE8ZX14-NOIRMNOIR 14GA TEW ELECTRIC WIRE

8ZX14-ROUGEMRED 14GA TEW ELECTRIC WIRE

8ZX14-VERTMGREEN 14GA TEW ELECTRIC WIRE8ZX18-2SPLSWIRE 18-2 CONDUCT.SHIELD GREY

8ZX18-3SPLSWIRE 18-3 CONDUCT.SHEILD GREY

8ZX18-4SPLSWIRE 18-4 CONDUCT.SHIELD GREY8ZX18-7SPLSELEC.WIRE 18/7 COND.SHEILDER

8ZX18-9SMCABLE 18/9 9 CONDUCT8ZX20-4PISPLSELECT.WIRE 20/4 PAIR IND SHLD

8ZX20-6PSPPLSCABLE 20/6 PAIR SHIELDED

8ZX22-12PPLSELECT.WIRE 22/12 PAIR8ZX22-2PISMCABLE 22/2 PAIR IS8ZXCAT5PLSWIRE CAT 5E BLUE 305M

8ZXRJ-45CHRJ-45 CONNECTOR

2015-06-02Page 4 / 7


Edition




Control interface

2H4506CHCONTROLE INTERFACE 6 SWITCHS2H4507CHCONTROLE INTERFACE 7 SWITCHS

2H4508CHCONTROLE INTERFACE 8 SWITCHS







Rotative relay

8HC361CHTURN BUTTON RELAY OP/CL

8HC362CHBARRETTE 24 POLES8ZF024CHBOX AC 24"X 24"X 8" NEMA48ZF072CHCABLE TRAY 1.5" X 2" X 6'

8ZF074CHCABLE TRAY COVER 6'


Power panel

2015-06-02Page 5 / 7


Edition



8HC73CHSWITCH 32A3PN4X8ZF024CHBOX AC 24"X 24"X 8" NEMA4BR2230ACHBREAKER 2 POLES 30 AMP

BR2P10ACHBREAKER 2 POLES 10 AMPBR2P15ACHBREAKER 2 POLES 15 AMP

BR2P1ACHBREAKER 2 POLES 1 AMP

BR2P20ACHBREAKER 2 POLES 20 AMPBR2P2ACHBREAKER 2 POLES 2 AMPBR2P30ACHBREAKER 2 POLES 30 AMP

BR2P5ACHBREAKER 2 POLES 5 AMPBR3P10ACHBREAKER 3 POLES 10 AMP


BR3P20ACHBREAKER 3 POLES 20 AMPBR3P30ACHBREAKER 3 POLES 30 AMPBR3P40ACHBREAKER 3 POLES 40 AMPBR3P50ACHBREAKER 3 POLES 50 AMP


BUSS2P12PCHBUSS BAR 2P12 PINSBUSS3P12PCHBUSS BAR 3P12 PINS

GR4-148SCHGROUND BAR 4-14 8SSECT3P125ACHSELECTOR 3 POLES 125 AMPSSECT3P175ACHSELECTOR 3 POLES 175 AMPS

SECT3P40ACHSELECTOR 3 POLES 40 AMPS

SECT3P63ACHSELECTOR 3 POLES 63 AMPSSECT3P80ACHSELECTOR 3 POLES 80 AMP


Cable tray>>> PRICE ON REQUEST ACCORDING TO QUANTITIES

CB5015053CHCABLE TRAY 50MMX150MM X3 METER

CB505053CHCABLE TRAY 50MMX50MM X3 METERSKK34CHCOUPLER KK34

SPB50MMCHSPIDER BRACKET FOR 50MM TRAY

WB100MMCHWALL BRACKET FOR 100MM TRAYWB150MMCHWALL BRACKET FOR 150MM TRAY

2015-06-02Page 6 / 7


Edition




Motor starter

8ZE107-1CHSTARTER 1/8HP 1PH 240V8ZE107-115CHSTARTER 1/8HP 1PH 115V

8ZE109-02CHSTARTER 1/4&1/2HP 220VAC 1PH

8ZE109-3CHREVERSED RELAY FOR 8ZE1098ZE114CHSTARTER 1/8HP-3PH 208V C24

8ZE115CHSTARTER 1/2HP-3PH 208V C24

8ZE116CHSTARTER 1/3HP-5WIRE.1PH 220V8ZE121CHRELAY START .107-115-114-133-1

8ZE124CHSTARTER RELAY KIT FOR 8ZE116

8ZE124-1CHSTARTER RELAY FOR 8ZE116+1408ZE133-1ACHCONTACTOR 1.5HP 240VAC BOB.24

8ZE133-1BCHTRANSFO REMPL. FOR 8ZE133-1

8ZE133-1CCHDIODE BRIDGE 35A8ZE133-1DCH5 AMP BRAKER FOR 8ZE133-1

8ZE133-2ACHCONTACTOR 1.5HP 240VAC BOB.24

8ZE133-3ACHINTERLOC FOR CA88ZE133-ACHCONTACTOR INV.3 POLES 24V AC

8ZE133LCHSTARTER 1/10HP SWIT.110/220V

8ZE134CHSTARTER .59HP 240V 1PH 5R10828ZE137-1CHMOTOR STARTER 25A

8ZE137-120CHSTARTER 30A BOB 120VAC8ZE140CHMOTOR STARTER FOR RW402

8ZE140LCHMOTOR STARTER FOR RW402

8ZE141CHMOTOR STARTER FOR RW 2428ZE141-ACHRELAY PROTECTOR FOR 8ZE1418ZE142CHMOTOR STARTER 0.37KW208VAC 3HP

8ZE266CHSTARTER 2X1/10HP SWIT.110/220V8ZE532CH8ZE133-1 QUAD

2015-06-02Page 7 / 7


Edition

iGrow 450/850 climate control



iGrow 450/850INCLUDED SENSORS TEMPERATURE AND RELATIVE HUMIDITY- Air temperature probe: -40° to 120°F ±0.1°C- Relative huymidity: 0 to 95% ±3%

CONTROL FEATURES:- MODEL 450: 4 equipment control outputs- MODEL 850: 8 equipment control outputs- 3 daily setpoints (day, night, DIF)- 2 heatings and 6 cooling stages- 2 dehumidification stages- Full data and sensor logging (option #6CT111 required)- Onboard and removable USB memory- Data graphing and analysis capabilities- Special analysis tools: - Equipment run-time recorded - Energy metering - Return on investment calculator- Internet connectivity through optional RJ45 port (option #6CT111 required)

CONTROLLED EQUIPMENT:- Alarms (with audible notification)- Thermal curtain- Pump for evaporation curtain- Shutters- Opening panel- Misting- HAF fans- Exhaust fan- Grow lights via timer

OPTIONAL ACCESSORIES:- Weather station #6CT137- Wind speed #6CT138- Communications Module #6CT111- iControl #6CT122

6CT104-VCTHCHIGROW 450 VCTH6CT108-VCTHCHIGROW 850 VCTH

2015-07-08Page 1 / 3


Edition




Weather station 450/850- Wind speed sensor- Rain sensor, junction box- Outdoor temperature sensor- Light intensity sensor (klux to w/m2)

6CT137CHWE.STAT.ORIGI PR450-850WS/WD/R

6CT138CHANEMOMETER FOR SERIE 100/1000


Rain sensorAn optical rain detection sensor.Detects rain to notify your iGrow controller if vents should be closed.

6CT139CHOPT. RAIN SENS.SERIE 100/1000


450/850 accessories

3F525CHFIXATION KIT FOR WEATHER STAT.

6CT111CHS COMMUNICATIONS MODULE6CT112CHT/RH SENSOR FOR 100/1000

6CT122CHI CONTROL 100

6CT122+5CHI CONTROL 100 + 5

2015-07-08Page 2 / 3


Edition




Interface controlIncludes: - PVC housing - Transfo 115-230/24 of 150 VA - Control relays - Track for relays - Electrical drawing

3F4504CHLINK ACCESSORIES 4503F4508CHLINK ACCESSORIES 850

2015-07-08Page 3 / 3


Edition


F 46A

2015-07-02

iGrow 450/850

It is necessary to add auxiliary relay controls with these two controls (6CT104-VCTH and 6CT108-VCTH) in order to ensure a decent longevity. Otherwise their longevity will be reduced. Control relays integral parts of the control have the ability to switch a signal with a maximum capacity of 2 amps and that for 1,000,000 times. If we reduce the signal to 1 Amp then we will be good for 5,000,000 times and if we cut again, we could still go up to 1,000,000,000 or 1,000 times more cycle if we do not use auxiliary control relay. Another good reason to use auxiliary control relay, is the relay controls which are an integral part of the control have no protection. If a connection error, a broken wire or a broken coil starter happens, then this control relay is no longer functional and is not replaceable. Eventually, this could lead to the need to change the controller. For these reasons, we created 2 serpack, one for the 450 and one for the 850. In addition, we took this opportunity to include a series of connection plans. For each controller, observe the following prescription:

6CT104-VCTH iGrow 450 VCTH Basic control with temperature and relative humidity sensor

6CT111 S COMMUNICATIONS MODULE Option for communication

6CT137 WE.STAT.ORIGI PR450-850WS/WD/R Security option depending on weather option (only one for several controls considering each controller has an S module)

6CT138 ANEMOMETER FOR SERIE 100/1000 For wind speed protection only (only one for several controls considering each controller has an S module)

3F4504 LINK ACCESSORIES 450 Mandatory

6CT122 ICONTROL 100 Option for communication with PC (option 6CT111 required)

6CT122+5 ICONTROL 100 + 5 Option for communication (after 5 controllers) (option 6CT111 required)

6CT108-VCTH iGrow 850 VCTH Basic control with temperature and relative humidity sensor

6CT111 S COMMUNICATIONS MODULE Option for communication

6CT137 WE.STAT.ORIGI PR450-850WS/WD/R Security option depending on weather option (only one for several controls considering each controller has an S module)

6CT138 ANEMOMETER FOR SERIE 100/1000 For wind speed protection only (only one for several controls considering each controller has an S module)

3F4508 LINK ACCESSORIES 850 Mandatory

6CT122 ICONTROL 100 Option for communication with PC (option 6CT111 required)

6CT122+5 ICONTROL 100 + 5 Option for communication (after 5 controllers) (option 6CT111 required)




F 46B

2015-07-06

iGrow 450/850

Communication strategy There are two ways to access your controllers' iGrow 450 and iGrow 850 by remote: Free Link4cloud and paid software, the iControl 100. In both cases, you will need to purchase an "S module" for each controller. With the Link4cloud, you will have access to the controller as if you were there, you can change the data and read data remotely. The connection is made with a cable RJ45 (standard network cable that can have a maximum length of 100 meters). Each controller must be connected to a wire network and a router or on Ethernet switch. Simply go to the address https://igrow.link4cloud.com/ and create a free account and follow the instructions to add your controllers. If there is a USB key into the iGrow, you can access the data stored on it. Example: temperature and other data that have been previously stored on the USB key. The data is. CSV format. You can then use these data to make graphs in Microsoft Excel.


Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 1/3 U:\Catalogue PDF\F_46B_ENG.doc


F 46B

2015-07-06

iGrow 450/850

Communication strategy iControl 100 The iControl 100 software allows you to connect controllers together with a wire (a 4 conductors wire twisted and shielded by pair). It uses the same communication network that the weather station. The communication wire can reach up to 300 meters. So you will just have to connect a wire to your computer, if you already have a communication wire for weather station. To access all your controllers at the same time, you only have to open the iControl 100 software. You can subsequently create groups of controllers with the same settings, give names to your controllers, copy the settings from one controller to another, change the settings on multiple controllers at once. The program window will turn red in case of alarm. You can also update the controls directly from the software. You can also customize the data you want to see in the main menu. You will also have access to base graphics on what is available in the iGrow. There is also a function to automatically record data on the USB drive. You can then remove the USB from the controller and connect it to a computer to make graphs in Microsoft Excel. You must purchase a license of iControl 100 for each iGrow 450/850. After 5 controllers, the other licenses (# 6CT122+5) are free. Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2015-07-06



F 46B

2015-07-06

iGrow 450/850

Communication strategy

Access to control, via Internet To access to the control by Internet, you must use software to take control of the computer that communicates with the iGrow. There are several free software on internet as Logmein, Teamviewer, Joinme software, etc. You can also configure a VPN connection or use the Windows remote desktop. There are also free remote access software and with charge for smart phones and tablets. Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2015-07-06


iPonic 614 climate control



iPonic 614INCLUDED SENSORS:- Air temperature probe + humidity probe- CO2 probe: 0 - 2000 ppm- Light sensor

CONTROL FEATURES:- 8 outputs 115 VAC programmable- 3 daily (day, night, DIF) set points- Full data and sensor logging- Onboard memory and USB port- Data graphing and analysis capabilities

SPECIAL FEATURES: (OPTION #6CT111)- Internet connectivity through optional RJ45 port Provides access to: - iPonic Cloud - Alarm by email - SMS - Smartphone application and Windows compatible - Micro SD card slot

CONTROLLABLE EQUIPMENT:- Alarms- Heating- Air conditioning- Humidification- Dehumidification- Fan- CO2 inject- Growing light- Irrigation valve- Irrigation pump

6CT111CHS COMMUNICATIONS MODULE6CT121CHIPONIC-614

2014-04-09Page 1 / 1


Edition

Priva climate control



Climate control

8HP0000CHMETEO MAST WIND DIRECTION8HP0001CHWIND DIRECTION SENSOR

8HP0002CHMOUNTING BRACKET UNIVERSAL

8HP0003CHSENSOR RAIN DETECTOR8HP0004CHSENSOR OUTSIDE TEMPERATURE

8HP0005CHRADIATION SENSOR CMP3

8HP0010CHMETEO INTERF. IN ENCLOSURE BK8HP0015CHLINEAR LIGHT BLACK

8HP0020CHPAR LI-190SL QUANTIM

8HP0025CHLEVELING FIXTURE PAR8HP0030CHPRIVA MAXIMIZER 1 CLIMATE ZONE

8HP0035CHSOFTWARE SECOND ZONE

8HP0040CHSOFTWARE MULTI-LANG. SUPPORT8HP0042CHREPLACEMENT MAXIMISER

8HP0043CHSOFTWARE REPLACEMENT

8HP0045CHSENSOR ASPIRATED TEMP & RH8HP0046CHGREEN LEAF SENSOR

8HP0050CHOPTO 22 C/W ENCL 120V D.CON.

8HP0055CHHOST PC8HP0056CHPRIVA OFFICE DIRECT MAXIMIZER

8HP0085CHMANUAL PRIVA MAXIMISER ENGLISH8HP0090CHMANUAL PRIVA MAXIMISER FRENCH

8HP0110CHLEVEL PROBE PRIVA TANK 0-5M

2015-06-01Page 1 / 1


Edition

Priva parts



Various equipment

6CT040CHCAPTEUR PHOTOELECTRIQUE AB6CT041CHREFLECTEUR 3 PO.

8HC09CHSENSOR TEMP.SOIL (75X10)STEEL

8HC15CHPSYCHOMETRIC WICK.BLACK 0.4M.8HC16CHREPLACEMENT SENSOR TEMP&HUMID

8HC16MCHTEMP.MAMAC SENSOR 2 PO S.S

8HC17CHMOTOR FAN PRIVA8HC18CHSENSOR HOT WATER TEMPERATURE

8HC18-150CHSENSOR HOT WATER TEMPERATURE

8HC20CHVENT POSITION INDICATOR 90*8HC21CHCOMMUNICATION CHIP U18

8HC22CH5X20 1.6amp.250v.SLOW-BLOW

8HC23CHE SQUARE PROM.U198HC25CHSENSOR ASP.TEMP.& RH

8HC28CH90* POTENTIOMETER

8HC29CHINTERFACE OP/CL SWITCH8HC30CHINTERFACE ON/OFF SWITCH

8HC301CHINT SW ON/OFF :OPEN/CLOSE

8HC305CHANALOGUE SWITCH 48HC31CHCOMMUNICATION CHIP U36/U38

8HC35CHEC INTERFACE 2 SS8HC63CHEC SHORT SENSOR

8HC64CHEC SHORT SENSOR UNION SET

8HC65CHPH SENSOR H.P 10 ATM C.P8HC66CHFLASH CARD MAXIMIZER TE8HC67CHPVC HOLDER/PH SENSOR 3/4" BAY.

8HC68CHINTERFACE PH IN ENCL.2 SENSORS8HC69CHKEYPAD FOR MAXIMIZER TE

8HC70CHTEMP SENSOR CLAMP

8HC71CHDOSING VALVE FERTILIZER8HC72CHRAIN SENSOR8HC74CHANGLED EC SENSOR

2015-07-01Page 1 / 2


Edition

Priva parts


8HC75CHLEVEL SENSOR TANK 0-5 METERS8HC76CHLEVEL SENSOR TANK 0-1 METERS8HC77CHTEMP SENSOR VENTILATED

2015-07-01Page 2 / 2


Edition

Heating by microtube



UnionUnion for microtube.

6K03CHMICROTUBE SPLICE UNION


ElbowAlimentation elbow for microtube.

6K01CHMICROTUBE "L" FITTING


TeeAlimentation tee for microtube.

6K02CHMICROTUBE "T" FITTING


MicrotubeBiotherm microtube.

6K10RLSMICROTUBING (1000') PER COIL

2015-06-18Page 1 / 2


Edition

Heating by microtube



SupportBiotherm reusable support.

6K04PLSMICROTUBE GRABBER-TRAK

2015-06-18Page 2 / 2


Edition

Section:

Date effective:

F 70A

2014-04-16

Heating

Estimation of thermal energy required

METRIC UNITS ENGLISH UNITS

Q = K x S x (Ti-Te) Q = 1.2 x A x u x (T¹ - T²) 1000 (1.2 = safety factor) Q = Btu required per hour Q = Required kilowatts A = Total surface exposed (in square feet) K = Heat transfer coefficient (watts/m² ºC) u = Heat transfer coefficient(Btu/hre ft² ºF) - Double poly K = 4.00 - Single poly K = 6.53 - Double poly u = 0.70 - Single glass K = 6.46 - Single poly u = 1.30 - Fiberglass K = 5.68 - Single glass u = 1.14 - Double polycarbonate K = 3.40 - Fiberglass u = 1.00 - Triple polycarbonate K = 2.92 - Double polycarbonate u = 0.60 - Triple polycarbonate u = 0.52 S = Total surface exposed (in square meter) T¹ = Minimum inside temperature (in ºF) Ti = Minimum inside temperature (in ºC) T² = Minimum outside temperature (in ºF) Te = Minimum outside temperature (in ºC) 1 BTU = 3,96 kilocalories 1 kilowatt = 3412 BTU/hre ENERGETIC EFFICIENCY

SOURCE EFFICIENCY ENERGETIC LOAD Propane 85% 110,000 Btu/gallon Electricity 100% 3,413 Btu/kWh #2 grade oil 75% 167,400 Btu/gallon Coal 75% 13,000 Btu/lbs Natural gas 80% 1,000 Btu/ft3

Heavy oil 1.5% SO2 2.5% SO2

75%75% 184,300

182,000 Btu/gallon Btu/gallon

Hard wood 70% 7,500 Btu/lbs Soft wood 70% 7,700 Btu/lbs Sawdust 60% 6,000 Btu/lbs

1ºF WARMER = HEATING COSTS 5%



Furnaces



PTP model- Designed especially for greenhouses- Stainless steel heat exchanger comes standard on all units to withstand corrosive combustion air found inside a greenhouse- 10-year heat exchanger warranty is standard- Constructed with Modine's proven tubular heat exchanger design- Installs quickly and easy with field wiring connections and knockouts for quick access to gas and electricity- Standard power exhaust simplifies side-wall or roof venting with small diameter vent pipe- Permanently-lubricated motor for trouble-free dependability- 80% thermal efficiency- Made in the USA

6KPTP150CHAEROTH MOD PTP INOX 150000

6KPTP175CHAEROTH MOD PTP INOX 1750006KPTP200CHAEROTH MOD PTP INOX 200000




Evacuation kitEvacuation system (chimney)3H45200 => For models 150 to 2003H45250 => For models 250 to 400

3H45200CHEVACUATION SET 200BTU & LESS

3H45250CHEVACUATION SET 250BTU & MORE

2014-01-29Page 1 / 2


Edition

Furnaces



Furnace support

3H4506CHFURNACE SUPP SET 6'SPACING3H4512CHFURNACE SUPP SET 12' SPACING

3H4515CHHEAT HANGER KIT ASSEMBLY


Parts

1P029CHADJUSTABLE 90* 4" GALV. ELBOW

8E044CHCONDUIT 4" X 60" 30GA #441128E045CHCOND.4" X 36" 30GA #4401138E046CHTEE 4"X 4"X 4" #4660388E052CHCAP GALVANISED 4" 30 GA

8E053CHCHIMENY COLLAR GALV. 4"

8E054CHCHIMENY COLLAR GALV. 6"8E055CHTEE 6"X 6"X 6" #466076 C28

8E056CHCAP GALVANISED 6" 30 GA8E520CHPIPE 6" X 15" 26GA8E521CHADJUSTABLE 90 ELBOW 6" 26Ga

8E522CHPIPE 6" X 60" 26GA

8E523CHPIPE 6" X 24" 26GA8E524CHPLATE 18GA 16"X 16" HOLE 6"RD

2014-01-29Page 2 / 2


Edition


F 75A

2013-10-04

Fournaises Furnaces

Données Techniques Technical data

Modèle PTP / PTP model

150 175 200 250 300 350 400

BTU/Hr entrée1 BTU/Hr Input1 150,000 175,000 200,000 250,000 300,000 350,000 400,000

BTU/Hr sortie1 BTU/Hr Output1 120,000 140,000 160,000 200,000 240,000 280,000 320,000

Hauteur de montage (pi)2 Mounting height (ft)2 15 14 15 18 19 18 21

Portée à la hauteur de montage (pi.)2 Heat throw (ft.) (@ Max Mtg Ht)2

51 50 53 62 69 65 74

1 Le rendement est pour une altitude de 0 à 2,000 pieds au-dessus du niveau de la mer. Passé 2,000 pieds d'altitude, il faut réduire la capacité de 4% par 1,000 pieds supplémentaires. Requiers un ensemble de hautes altitudes si utilisé à plus de 2,000 pieds. 1 Ratings shown are for elevations up to 2,000 ft. For elevations above 2,000 feet, ratings should be reduced at the rate of 4% for each 1,000 feet above sea level. Reduction of ratings requires use of a high altitude kit.

2 Valeur mesurée à 65°F de température ambiante et 55°F d'augmentation de température (55+65=120°F de température de l'air à la sortie). Hauteur d'installation est du sol à la base de l'unité. 2 Data taken at 55°F air temperature rise. At 65°F ambient and unit fired at full-rated input. Mounting height as measured from bottom of unit, and without deflector hoods. Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2013-10-04

Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 1/1 U:\Catalogue PDF\F-75A.doc

Heater



IHS 700 model- 700,000 BTU- 230/1 PH, 230/3 PH, 600V & 480 volt options- 4600 CFM (5 HP motor)- High temp rise- 4" static pressure- 2 x 16" outlet- 2 x 16" inlet (return air option)- 35" W x 96" L x 56" H- Easy panel access- Fork lift pockets, lifting hooks & stackable- 1600 lbs- Available in propane, natural or oil

IHS700CHIHS 700 OIL FIRED HEATER 600V

IHS704CHIHS 700 NAT GAS HEATER 240VIHS706CHIHS 700 OIL FIRED HEATER 220V


Parts

6KFF0001CHRACCORD KIT FOR FROSTFIGHTER

6KFF0002CH16" x 120" RIGID STEEL PIPE GV6KFF0003CHGALV PIPE 8" X 36" 22GA

6KFF0004CHGALV CAP 8" 28 GA

6KFF0005CHELBOW 90* AJUST.16" 24GA #436IHS701CH16 IN x 50 FT LAYFLAT DUCTS P.

IHS702CH16 IN x 50 FT LAYFLAT DUCTS S.IHS703CH16 IN x 80 FT LAYFLAT DUCTS S.IHS705CH16 IN x 100FT LAYFLAT DUCTS P.

IHS707CH2 WALL 175 GALLON TANK

2014-09-16Page 1 / 1


Edition

CO2 generator



250 MBTU model- High-grade stainless steel design- Easy to operate and fully automatic, require a CO2 sensor or thermostat- Failure alarm- Automatic ignition- Flame monitored by ionization probe- Air pressure switch with paper filter- NG-LPG gas conversion manual valve- Room thermostat socket- Overheating thermostat- C.S.A.

FEATURESThermal power capacity: 264,686 BTU/hAirflow: 2766 cfmTemperature rise: 103°F (@ 68°F ambient) in conformity to the CSA testPower: 500W - 5 APower requirement: 120V 60HzDimensions: 45.1 x 23.2 x h = 17.4" : weight 101 lbsShipping dimensions: 46.9 x 26 x h = 24.57" : weight 134 lbsEfficiency: 99%

6KTL250MBTUCHBM2 C02 GENERATOR 250MBTU

2014-09-17Page 1 / 2


Edition

CO2 generator



400 MBTU model- High-grade stainless steel design- Easy to operate and fully automatic, require a CO2 sensor or thermostat- Failure alarm- Automatic ignition- Flame monitored by ionization probe- Air pressure switch with paper filter- NG-LPG gas conversion manual valve- Room thermostat socket- Overheating thermostat- C.S.A.

FEATURESThermal power capacity: 402,767 BTU/hAirflow: 4120 cfmTemperature rise: 103°F (@ 68°F ambient) in conformity to the CSA testPower: 940W - 8.7 APower requirement: 120V 60HzDimensions: 46.7 x 26.9 x h = 21.1" : weight 123 lbsShipping dimensions: 48.8 x 29.5 x h = 28.27" : weight 163 lbsEfficiency: 99%

6KTL400MBTUCHBM2 C02 GENERATOR 400MBTU

2014-09-17Page 2 / 2


Edition

CO2 control



CO2 control

6CT130CHCO2 MONITOR 0-2000 PPM6CT131CHCO2 MONITOR 0-3000 PPM

6CT131ACHCOMMUNICATION CALBE 6CT131

8HC101CHCO2 CALIBRATION GAS 2600-PPM8HC102CHCO2 CALIBRATION SET

8HC103CHPRESSURE REGULATOR CO2 CALIB

8HC104CHCO2 CALIBRATION GAS 0-PPM


Material for outside air intake

8E109CHFLEXIBLE ALUM.CONDUCT 5"X 25'

2014-10-30Page 1 / 1


Edition


F 79A

2014-11-20

CO2 CO2

Données Techniques (Renseignements généraux)

Technical data(General information)

Gaz naturel ou gaz propane Natural gas or propane gas

Net Capacité Net capacity

Surface de Serre Greenhouse area

250,000 Btu/h 15,000-20,000 pi.ca. / sq.ft. Pour injecter 10 gr/M2/h de CO2

400,000 Btu/h 25,000-30,000 pi.ca. / sq.ft. To inject 10 gr/M2/h of CO2

CO2 125 ppm: Arrêt de croissance des plantes

Stop of plant growth

330 ppm: Concentration normale de l'air à l'extérieur Normal concentration of the outside air

1000-1500 ppm: Croissance optimale Optimal growth

1500 ppm: 4800 pi.ca. = 60,000 Btu/heure = 12.5 Btu/heure/pi.ca. 4800 sq.ft. = 60,000 Btu/hour = 12.5 Btu/hour/sq.ft.

2000 ppm: Maximum pour les plantes Maximum for plants

5000 ppm: Dommages à la santé humaine Damage to human health

CAPACITÉ DU GÉNÉRATEUR CO2 = PI.CA. DE SERRE X 12.5 = _ _ _ BTU/HEURE

CAPACITY OF THE CO2 GENERATOR = SQ.FT. OF GREENHOUSE X 12.5 = _ _ _ BTU/HOUR Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-11-20


GMicro-irrigation

Page Page title

70 Aquaboom (parts)

88 Aquaboom accessories

87 Aquaboom hose

82 Aquaboom injector

1 Chapin tube-weights

20 Drip irrigation 16 mm

14 Drip irrigation parts

15 Drip irrigation tools

11 Dripper

62 Fog

68 Ground Aquaboom

69 Ground Aquaboom track

75 Kit for irrigation

52 Micro-irrigation

53 Micro-irrigation

60 Micro-irrigation accessories

84 Nozzle holder

47 Olson Ojet

65 Overhead Aquaboom

55 Overhead watering

40 Pressure regulator

41 Pressure regulator

9 Shrubbler

85 Spraying system nozzle

2018-05-14 Page 1 / 1

Chapin tube-weights

Date effective: 2014-02-10Section: G 1


Tube and weightTube-weights. Tube of 0.128" outside. Operating at 4 psi. Regular tubes with "drop-in" weights facilitate pot removal and replacement.>>> UNTIL SUPPLIES LAST

LC412124CH.050 X 24" TUBE + WEIGHT

LC412230CH.060 X 30" TUBE + WEIGHT

LC412236CH.060 X 36" TUBE + WEIGHTZM001CHCHAPIN FRENCH INSTRUCTION


PlugSold in package of 100 units.

LC422901CHPLUG FOR TUBING .128 OD


Brass insertBrass insert for protection of .128 OD tube. Punch chuck LD7710 and LD7711 bit could be use.>>> UNTIL SUPPLIES LAST

LC002CHBRASS INSERT FOR .128 OD TUBE

2014-02-10Page 1 / 3


Edition

Chapin tube-weights



WeightEconomical weight for spaghetti (sold in box of 500 units).

LC001CHANCHOR FOR LARGE TUBING .128OD


Spray-TubeSpray-Tube uses 24’’ tubes 0.36’’x0.128’’ or 0.050’’x0.128’’. Shut off Spray-Tube by inserting supply tube into lind hole on back.

Pot gpm 0.036" 0.050"dimension psi psi 6"- 8" 0.07 3.2 1.110"-12" 0.08 4.1 1.45-15 gal 0.10 6.2 2.120 gal.+ 0.12 8.5 2.9

LC225CHSPRAY-TUBE TYPE "P" FOR POT


.128 tubeHeavy tube (sold by foot).

LD7004PLSTUBING .050 ID X .128 OD.

LD7005PLSTUBING .060 ID X .128 OD

LD7006PLSTUBING .076 ID X .128 OD

2014-02-10Page 2 / 3


Edition

Chapin tube-weights



.128 tubeHeavy tube (sold by roll).

LD70041RLSTUBING .050 ID X.128 OD(2500')LD70051RLSTUBING .060ID X.128 OD.(2500')


Supply tubeSupply tube.

LD6901PLSPVC MICRO TUBE .125 ID X.187OD

LD69010RLSTUBING .125ID X.187 OD.(2500')

LD69011RLSTUBING .125ID X.187 OD.(3000')LD69013CHTUBING .125ID X .187 OD.(1000'LD7009PLSTUBING .160ID X .220OD / FOOTLD70092RLSTUBING .160ID X .220OD (1000')

LD7011PLSTUBING .250ID X.350OD / FOOT

2014-02-10Page 3 / 3


Edition

Shrubbler



ShrubblerDripper with 22 incremental adjustment from off to 10 gph. Working pressure from 20 to 45 PSI. Ideal for landscaping; a dripper to spider bubbler of 2 feet diameter. Screw on poly pipe or Olson riser, use punch tool type LP01 (see G-47 section).>>> UNTIL SUPPLIES LAST

SCA01CHSHRUBBLER 0 TO 13 GPH 10-32THD

2014-02-10Page 1 / 1


Edition

Dripper



Insert dripperEmitter turbulent flow offering the same flow at a specific pressure (use yellow punch for barb insert # LD7712 ). Can receive #4 tubing.

LG0305-1CH1/2 GPH PC DRIPPER (BLUE)LG0307-1CH3/4 GPH PC DRIPPER (BROWN)

LG0310-1CH1 GPH PC DRIPPER (GREEN)

LG0320-1CH2 GPH PC DRIPPER (RED)


Multi-outlet8 outlets turbulent dripper for Netafim tube. Use with Arrow dripper #LC219 for irrigation uniformity (use yellow punch for barb insert # LD7712).>>> UNTIL SUPPLIES LAST

LGMOD8CHMULTI-OUTLET DRIPPER 2gph


Arrow dripperDripper stick with labyrinth at angle position.Use with tube no. 3 #LD6901 or Netafim tubing.

LC224-2ICH6"ANGLE ARROW DRIPPER 2L/H

2014-03-26Page 1 / 3


Edition

Dripper



Angle stakeStake with angle barb inlet, for # 3 tubing.

LC224-1CH6"ANGLE ARROW DRIPPER FOR .125


TubeFlexible tube to facilitate emitters positionning in pots.Tube 0.125"ID x 0.187"OD.

LD6901PLSPVC MICRO TUBE .125 ID X.187OD

LD69011RLSTUBING .125ID X.187 OD.(3000')

LD69013CHTUBING .125ID X .187 OD.(1000'


White tube

LN77RLSMICRO PE SFLX WH 5/3 .197X.125

LN77-1PLSMICRO PE SFLX WH 5/3 .197X.125

LN78RLSMICRO PE SFLX WH 4/7 .160X.220LN78-1PLSMICRO PE SFLX WH 4/7 .160X.220

2014-03-26Page 2 / 3


Edition

Dripper



Drip irrigation

LN96CHBARB CONNECTOR FOR TUBE 4/7LN97CHBARB CONNECTOR FOR TUBE .125


AdapterAdapters for tube #3:1 outlet ==> LN952 outlets ==> LN32-14 outlets ==> LN31-1

LN31-1CH4-WAY MANIFOLD

LN32-1CH2-WAY MANIFOLD

LN36CHSHUT-OFF VALVE FOR TUBE 4/7LN94CH3mm FLEX TUBE ADAPTER(NIPPLE)

LN95CHADAPT. SPIGOT / BARB.125

2014-03-26Page 3 / 3


Edition


G 11A

2014-03-10

Goutteur Dripper

# LGMOD8

5 10 15 20 25 30 Pression (PSI) Pressure (PSI)

3.0

2.5

2.0

1.5

1.0

0.5

0

Déb

it (U

.S. G

PH)

Flow

rate

(U.S

. GPH

)

Goutteurs à 8 sorties (M.O.D.) Multi-outlet dr ipper (M.O.D.)

Débit VS pression Flow rate VS pressure

Quand un ou deux bâtons régulateurs sont bouchés, la décharge totale du goutteur sera de 2 à 5% p lus basse et divisée au nombre de bâtons régulateurs opérants. When one or two regulating sticks are p lugged, total dripper d ischarge will be 2 to 5% lower and divided to the number of operating regulating sticks.


Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 1/2 U:\Catalogue PDF\G_11A.doc


G 11A

2013-08-21

Goutteur Dripper

Relation pression débit par goutteur / Pressure – flow rate relation

m.w.h m.c.a 5 10 15 20 25 30 35 40 45

LG0305-1 2,2 l/h 2,1 2,1 2,2 2,2 2,2 2,2 2,1 2,1 2,1

LG0307-1 3,2 l/h 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,1

LG0310-1 4,0 l/h 3,8 4,0 4,0 4,0 4,1 4,1 4,1 4,1 4,0

LG0320-1 7,8 l/h 7,6 7,9 7,8 7,8 7,8 7,8 7,9 7,8 7,8

Filtration minimum recommandée 120 mesh 120 mesh minimum recommended filtration



Drip irrigation parts



TeeTee for #3 and 4 drip irrigation tubing.

LC200CHTEE 1/8"BARB/THREAD/THREADLC201CH1/4''TEE BARB X BARB X BARB


Tube adapterNo. 3 nipple insert (also can use LP6091 adapter).(Use #LD7712 yellow punch with #LD7710 bit holder ).

LC221CHBARB X THREAD CONNECTOR .125ID


Goof plugGoof plug, double-sized for closing holes in tubing.LG9000 ==> Closes holes from 0.110" to 0.250"LG9001 ==> Closes holes from 0.214" to 0.293"

LG9000CHDUAL PLUG 1/4"TUBE

LG9001CH2 SIZES PER PLUG .214"&.293"


Harnois stickInsert "Harnois" stick for no.4 tubing.

2013-12-17Page 1 / 2


Edition

Drip irrigation parts


LC223CH5" HARNOIS STAKE FOR #4 TUBING


Tube stabilizerStabilizer for tube, allows to maintain the tube and is dripper in the container.

LC222ACHPLASTIC STAKE FOR.187 OD TUBE

2013-12-17Page 2 / 2


Edition

Drip irrigation tools



Harnois tool

XLG01CHDRIP IRRIGATION TOOL


Bit holderPunch chuck for different bits.

LD7710CHDP-E PUNCH HANDLE ONLY/EJECTOR


BitBits for punch chuck.Tip size Hole Emetter shaft LD7711 (red) .100" .130" - .160"LD7712 (yellow) .125" .165" - .190"LD7713 (green) .135" .200" - .250"

LD7711CHRED TIP ONLY FOR .100

LD7712CHYELLOW TIP ONLY FOR .125

LD7713CHGREEN TIP ONLY FOR .135

2014-11-20Page 1 / 2


Edition

Drip irrigation tools



PunchEjector style hole punches.

LD7714CHEJECTOR STYLE HOLE PUNCHES 2.5


Replacement tip

LD7714-1CH2.5MM REPLACEMENT TIP/EJECTOR

2014-11-20Page 2 / 2


Edition

Drip irrigation 16 mm



Black tube

LAR620RLSTUBING .620ID X.710 OD.(1000')LAR6201PLSTUBING .620ID X .710OD /FOOT

LAR621RLSTUBING .620ID X.720 OD.(1000')

LAR6211PLSTUBING .620ID X .720OD /FOOT


White tube

LAR107RLSWHITE TUBING 1.06"X1.20"X 500'LAR1071PLSWHITE TIBING 1.06ID X 1.20ODLAR822RLSTUBING.820ID X.940/500'WHITELAR8221PLSWHITE TUBING.820ID/.940OD/FOOT


Adapter for PVC pipe16mm PVC pipe adapters. Use # LD0317 adapter with #LD0317A grommet for PVC pipe 1-1/2'' and more (drill hole 19mm). Use #LD0716 adapter with #LD0516 grommet for PVC pipe 2'' and up.

LD0317CH16mmX16mm ADAPTOR FOR PVC PIPELD0317ACHGROMMET-TOPHAT-16mm FOR LD0317

LD0516CHGROMMET-TOPHAT-19mm FOR LD0716

LD0716CHADAPTER 19mmX16mm FOR PVC PIPELD0716ACHADAPTER 19mm X 19mm POLY TUBE

2014-02-10Page 1 / 4


Edition




"Dril Lock" adapter

LD320CHADAPTER LOC SLEEVE X .250 BARB


Sealing sleeve

LD1117CHFIGURE 8 END CLOSURE FOR.700LD1118CHFIGURE 8 END CLOSURE FOR (3/4)

LD1119CHFIGURE 8 END CLOSURE FOR (1 )


Elbow

LD0616CH16mm ELBOW


Tee

LD0916CH16mm TEE

LD6071CHTEE FOR .620"ID

2014-02-10Page 2 / 4


Edition




Joiner

LD0416CH16mm COUPLING


In-line valve16mm shut off valve.

LD0816CHSHUT OFF VALVE 16mm


Dripline20mmID .710OD .805

LD640R1RLSDRIPLINE 20mm.4gPH-TO 24"1000'


Support hook

LD596CHDRIPLINE SUPPORT HOOK FOR 18mmLD598CHDRIPLINE SUPPORT HOOK FR 3/4"

LD599CHDRIPLINE SUPPORT HOOK FOR 1"

2014-02-10Page 3 / 4


Edition




Adapter

LD609CHSERIES 600 X 1/2" MPTLD610CHPOWER-LOC SERIE 600 X 3/4"MPT


Male hose adapter

LD621CHSERIES 800 BY 3/4''MALE HOSE

2014-02-10Page 4 / 4


Edition

Pressure regulator



PRV-075 series- Adjustable pressure regulator- 3/4" FPT x 3/4" FPT- Maximum inlet pressure: 125 psi- Plastic bodyKKPRV075A: min. 07 psi / max. 20 psi for flow from 0.2 to 22 gpmKKPRV075B: min. 12 psi / max. 35 psi for flow from 0.2 to 22 gpmKKPRV075C: min. 28 psi / max. 60 psi for flow from 0.2 to 22 gpmKKPRV075D: min. 50 psi / max. 85 psi for flow from 0.2 to 22 gpm

KKPRV075ACHADJUST.YEL.3/4"PRESSURE REGUL.

KKPRV075BCHADJ.REGULATOR 3/4" 12-35PSIKKPRV075CCHADJUST.RED 3/4"PRESS.REGULATOR

KKPRV075DCHADJUST.BLACK 3/4"PRESS.REGULAT


PRV-100 series- Adjustable pressure regulator- 1" FPT x 1" FPT- Maximum inlet pressure: 125 psi- Plastic bodyKKPRV100C: min. 14 psi / max. 28 psi for flow from 2 to 35 gpm

KKPRV100CCHADJUST.RED 1"PRESS.REGULATOR

2013-09-26Page 1 / 2


Edition

Pressure regulator



PRV-150 series- Adjustable pressure regulator- 1-1/2" FPT x 1-1/2" FPT- Maximum inlet pressure: 150 psi- Brass bodyKKPRV150B: min. 07 psi / max. 18 psi for flow from 2 to 80 gpmKKPRV150C: min. 14 psi / max. 28 psi for flow from 2 to 80 gpmKKPRV150D: min. 20 psi / max. 50 psi for flow from 2 to 80 gpmKKPRV150E: min. 40 psi / max. 80 psi for flow from 2 to 80 gpm

KKPRV150BCH1-1/2" WHITE SPRING REGULATOR

KKPRV150CCH1-1/2" RED SPRING REGULATORKKPRV150DCH1-1/2" BLACK SPRING REGULATOR

2013-09-26Page 2 / 2


Edition


G 40A

2013-09-26

Régulateur Pressure regulator

PER

TE D

E PR

ESSI

ON

PR

ESSU

RE

LOSS

DÉBIT (GPM) RATE OF FLOW (GPM)

PER

TE D

E PR

ESSI

ON

PR

ESSU

RE

LOSS


PER

TE D

E PR

ESSI

ON

PR

ESSU

RE

LOSS




Pressure regulator



PRV-.75 seriePressure regulator for flow from 3.5 to 20 GPM.3/4" FPT inlet, 3/4" MPT outlet.

KKN109CHPRESSURE REGULATOR 3/4"- 9PSIKKN112CHPRESSURE REGULATOR 3/4"-12psi

KKN115CHPRESSURE REGULATOR 3/4"-15PSI

KKN125CHPRESSURE REGULATOR 3/4"-25PSIKKN135CHPRESSURE REGULATOR 3/4"-35PSI


PRV-1.5 seriePressure regulator for flow from 7 to 40 GPM.1-1/2" MPT inlet and outlet.

KKN220CHPRESSURE REGULATOR 1.5"-20PSIKKN250CHPRESSURE REGULATOR 1-1/2-50psi


Regulating unitKit of replacement regulation.

KKNU09CHPRESSURE REGULATING UNIT 9PSI

KKNU12CHPRESSURE REGULATING UNIT 12PSIKKNU15CHPRESSURE REGULATING UNIT 15PSI


KKNU25CHPRESSURE REGULATING UNIT 25PSIKKNU35CHPRESSURE REGULATING UNIT 35PSI


2015-05-15Page 1 / 1


Edition


G 41A

2013-12-12


Procédure pour le choix d'un régulateur de pression Nétafim Procedure for choosing a Netafim pressure regulator ÉTAPE 1: Déterminer le débit et la pression du réseau d'irrigation. Le choix d’un régulateur de pression se fait en fonction de la pression d’opération requise et par le débit du réseau d’irrigation. STEP 1: Determine flow and pressure of irrigation system. The choice of a pressure regulator is determined by the required operating pressure and by the flow of the irrigation system. ÉTAPE 2: Choisir le diamètre du régulateur de pression. On considère un débit moyen de 12 à 16 gpm par ressort. STEP 2: Choose the pressure regulator's diameter 12 to 16 gpm per spring is considered a medium flow. ÉTAPE 3: Choisir le ressort (couleur) en fonction de la pression requise. Prendre en considération les pertes de pression dans le réseau d'irrigation après le régulateur. STEP 3: Choose spring (color) according to pressure required. Take into consideration pressure losses in irrigation system after the regulator. RÉGULATEUR DE PRESSION / PRESSURE REGULATOR

MODÈLE # CATALOGUE PRESSION À LA SORTIE

PRESSURE OUTPUT ÉCART DE DÉBIT

FLOW RANGE

RESSORTS DE RÉGULATEUR DE MODEL CATALOG # PSI M G.P.M. PRESSION

3/4" Low Flow 31-PRV-.75-LF 15 11 0.5-5 PRESSURE REGULATOR SPRINGS 31-PRV-.75-06 9 6 PRESSION DE 3/4" 31-PRV-.75-11 15 11 3.5-20 SORTIE NOMINALE (1 spring) 31-PRV-.75-14 20 14 COULEUR NOMINAL OUTLET 31-PRV-.75-18 25 18 RESSORT PRESSURE 31-PRV-1.5-06 9 6 SPRING COLOR PSI M 1 1/2" 31-PRV-1.5-11 15 11 7-40 Noir / Black 9 6 (2 springs) 31-PRV-1.5-14 20 14 Pourpre / Purple 12 8 31-PRV-1.5-18 25 18 Bleu / Blue 15 11 31-PRV-2 (4)-06 9 6 Inox / Stainless 20 14 2" x 4 31-PRV-2 (4)-11 15 11 15-80 Jaune / Yellow 25 18 (4 springs) 31-PRV-2 (4)-14 20 14 Rouge / Red 35 25 31-PRV-2 (4)-18 25 18 Blanc / White 43 30 31-PRV-2 (6)-06 9 6 Orange / Orange 50 35 2" x 6 31-PRV-2 (6)-11 15 11 25-120 Brun / Brown 57 40 (6 springs) 31-PRV-2 (6)-14 20 14 Vert / Green 65 45 31-PRV-2 (6)-18 25 18 31-PRV-3 (10)-06 9 6 3" x 10 31-PRV-3 (10)-11 15 11 35-200 (10 springs) 31-PRV-3 (10)-14 20 14 31-PRV-3 (10)-18 25 18 *Les pertes des têtes à un débit maximum sont élevées et dépendent d'une pression à l'entrée adéquate (voir paragraphe 2). Toute sortie de pression de 9 à 65 PSI peut être réglée par le manufacturier *Head loss at maximum flow rate is high, and depends on adequate inlet pressure (see graph 2). Any outlet pressure from 9 to 65 psi can be factory set. Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2013-12-12



G 41A

2013-12-12


NOTE 1 Les graphiques 1, 2 et 3 servent à évaluer les pertes de pression en fonction d’une variation du débit. NOTE 1: Graphs 1, 2 and 3 are used to evaluate pressure losses relatively to flow variation. NOTE 2 Des espaceurs d’ajustement de pression sont disponibles.

Pour augmenter la pression à la valeur requise par le réseau d’irrigation. Chaque espaceur augmentera la pression de 2 psi.

NOTE 2 Pressure adjustment spacers are available.

To increase pressure to level required by the irrigation system. Each spacer will raise pressure by 2 psi. NOTE 3 À faible débit (0.5 à 5 gpm), l’utilisation du régulateur de pression Nétafim 3/4" Low Flow est requise.

Nous n’avons pas en inventaire ce modèle. Il est préférable d’utiliser le modèle Bermad 3/4". NOTE 3 At low flow rate (0.5 to 5 gpm) it is required to use a Netafim 3/4" pressure regulator.

This model is not in stock. It is preferable to use Bermad 3/4" model.

1) Pression régularisée vs débit1) Regulated pressure vs flow rate

2) Perte de tête vs débit 2) Head loss vs flow rate

3) Perte de tête vs débit (3"x10) 3) Head loss vs flow rate (3"x10)



Olson Ojet



Installation tool"O-Jet" tool.

LP01CHKEY PUNCH & JET CAP REMOVER


ValveValve 10-32 for Olson.

LP10CHVARY-FLOW VALVE 10-32 X 10-32

2014-01-30Page 1 / 1


Edition

Micro-irrigation



Nozzle grommetInsert only (for 27/64" hole).

LV120CHINSERT RUBBER 3/8"


Leak prevention deviceLeak prevention device. Use low pressure device # LN06-1 (black/ opens between 15 and 20 psi) with sprinkling and misting nozzles; use high pressure device # LN06H (blue/ opens between 55 and 60 psi) with fog nozzles.

LN06-1CHLPD-LOW PRES SPRING LOADEDLN06HCHLEAK PREVENTION DEVICE BLUE


AntimistThe antimist is used to produce large uniform droplets. This prevents misting and promotes efficient application of water to your targeted area. Use the same color as the nozzle.

LN40CHANTI-MIST DEVICE GREEN

LN41CHANTI-MIST DEVICE ORANGELN42CHANTI-MIST DEVICE YELLOW

LN43CHANTI-MIST DEVICE BLUE

2013-10-25Page 1 / 7


Edition

Micro-irrigation



Assembled nozzleBridge with nozzle and mist spreader.Use with #LN06-1 parts.

LN44CHBRIDGE LPD/GRN.GR./GRN.A.M/NOZLN45CHBRIDGE LPD/YEL.FLT/YEL.A.M/NOZ

LN46CHBRIDGE LPD/YEL.FLT/GRN.A.M/NOZ

LN47CHBRIDGE LPD/YEL.FLT/ORA.A.M/NOZLN48CHBRIDGE LPD/GRN GR./YEL.A.M.NOZ

LN49CHBRIDGE LPD/GRN GR./ORA.A.M.NOZLN50CHBRIDGE LPD/GRN GR./BLUE AM/NOZLN51CHBRIDGE LPD BLACK RD/BLUE AM/NO

LN52CHBRIDGE LPD BLACK RD /YEL.AM/NOLN53CHBRIDGE LPD BLACK RD /GRN AM/NO

LN55CHBRIDGE LPD/BLACK NOZ./GRN GR


Bridge

LN03CHBRIDGE FOR MINI-SPRINKLER


Upside down spinner

LN13CHGREEN UPSIDE DOWN SPINNER

2013-10-25Page 2 / 7


Edition

Micro-irrigation



Flat spreader

LN02CHVIOLET SPREADERLN12CHYELLOW FLAT SPRAY SPREADER


Wing spinner

LN15CHBLACK SINGLE WING SPINNER


Round spinner

LN14CHBLACK ROUND SPINNER


Oblong spinner

LN16CHORANGE OBLONG SPINNER

2013-10-25Page 3 / 7


Edition

Micro-irrigation



Nozzle

LN04CHVIOLET NOZZLE .032"LN05CHGREY NOZZLE .044"

LN08CHGREEN NOZZLE .055"

LN09CHORANGE NOZZLE .060"LN10CHYELLOW NOZZLE .067"

LN11CHBLUE NOZZLE .075"


Assembled nozzle

LN72CHBRIDGELESS GREEN NOZ.-MIST/LPDLN73CHBRIDGELESS OR.NOZ.-MIST/LPD

LN74CHBRIDGELESS BLUE.NOZ.-MIST/LPD


"Super-mister"

LN75CHBRIDGELESS MISTER GREEN NOZ/LP

2013-10-25Page 4 / 7


Edition

Micro-irrigation



"Super fogger"

LN87CH2-WAY SUPER FOGGER - 3.3GPH


AdapterAdaptor for nozzle (use green bit for #LN17 adapter).

LN01CH3/8" TAPERED THREAD BUTTERFLYLN07CH1/2" MALE ADAPTOR BASE

LN17CHBUTTERFLY BARB

LN35CHMOUNT THREAD 3/16"


Fog nozzleFog nozzle. Minimum pressure of 60 psi. Use with blue leak prevention device # LN06H.(Substitute of LN30, see LN37 for the cross).

LN21CHDAN-FOGGER BLUE NOZZLE 1.8gphLN23CHORANGE DAN-FOGGER 3.6gphLN26CHRED DAN-FOGGER 5.4gph

2013-10-25Page 5 / 7


Edition

Micro-irrigation



Mist cross with nozzle

LN37CH4-WAY CROSS FOGGER BLUE W/LPD


Mist cross

LN30CH4-WAY CROSS FOR FOGGER


Mist

LN86CH2 WAYS TEE BLUE(1.8gph)FOG.LPD


Elbow

LN28CH45* FOGGER ANGLE

2013-10-25Page 6 / 7


Edition

Micro-irrigation



Tee

LN29CH2-WAY TEE FOR FOGGER

2013-10-25Page 7 / 7


Edition

Section:

Date effective:

G 52A

2014-01-09

Aspersion Micro-irrigation

Brumisation Fogger Système de brumisation à basse pression (55 lbs/po²) avec buse simple. Filtration 120 mesh minimum requise. Low pressure (55 psi) fog system using single nozzle. Filtration required, 120 mesh minimum.

USAGE USE

BUSE NOZZLE

DÉBIT FLOW

INSTALLATION INSTALLATION

ENTRE LES BUSESNOZZLES SPACING

ENTRE LES LIGNES LINES SPACING

HAUTEUR HEIGHT

Refroidissement Cooling

LN21 (bleu-blue) 1.6 gph

Vers le haut incliné à 45º

Inclined upward at 45º

20" 10' - - -

LN21 (bleu-blue) 1.6 gph Vers le bas

Down 24" 24" 48"

Propagation Propagating

LN23 (orange) 3.2 gph Vers le bas

Down 30" 30" 48"

LN26 (rouge-red) 5.2 gph Vers le bas

Down 36" 36" 48"

Croix porte-buses pour brumisation LN30. Fogger nozzle cross holder LN30. Système de brumisation à porte-buse en croix. Filtration 140 mesh requise; pression de 65 lbs/po². Fog system using nozzles on crosses. 140 mesh filtration required; 65 psi working pressure.

USAGE / USE INSTALLATION

REFROIDISSEMENT

Espacer les porte-buses de 6' à 10' sur la ligne en alternant l'angle*. Suspendre la ligne de buse le plus haut possible au milieu de la serre ou près des entrées d'air. Utiliser en cycle de 1 à 6 secondes tous les 1 à 2 minutes.

COOLING Foggers should be placed 6'-10' apart*. Place lines as high as possible above the crop or near intake windows. Normal cycle time is 1-6 seconds every 1-2 minutes.

*

Disposition sur la ligne / Overhead view

PROPAGATION Installer les buses de 30" à 60" au-dessus des plantes, espacées à tous les 36" sur la ligne en alternant l'angle*. Couvre des tables de 5' à 6' de large.

PROPAGATING Install nozzles from 30" to 60" above crop, spaced at each 36" on the line by altering angle*. Cover tables from 5' to 6' wide.



Section:

Date effective:

G 52A

2014-01-09


Aspersion Sprinkler

DIFFUSEUR BANDE BUSE HT. % DANS LA UNIFOR. SPREADER SPINNER STRIP NOZZLE HT. BANDE/STRIP COEF.

"Y"

4' VERT / GREEN 10" 63.6 95 LN12 5' VERT / GREEN 10" 78.2 94 PLAT JAUNE 6' ORANGE 10" 81.7 86 YELLOW FLAT 8' BLEU / BLUE 10" 84.5 89 "G"

8' ORANGE 10" 82.8 91 LN13 10' JAUNE / YELLOW 10" 90.5 91 12' BLEU / BLUE 10" 93.9 85 14' BLEU / BLUE 4' 73.4 96 15' BLEU / BLUE 4' 78.7 96 INVERSÉ VERT 16' BLEU / BLUE 4' 83.9 96 GREEN UPSIDE DOWN 16' JAUNE / YELLOW 6' 79.4 96 18' BLEU / BLUE 4' 92.9 95 18' BLEU / BLUE 6' 86.8 97 20' VERT / GREEN 4' 94.6 82 20' BLEU / BLUE 6' 94.4 95 22' ORANGE 6' 97.9 89 "BR"

10' JAUNE / YELLOW 4' 79.3 93 LN14 12' JAUNE / YELLOW 4' 92.2 91 12' BLEU / BLUE 6' 78.6 89 14' ORANGE 10" 92.6 84 14' BLEU / BLUE 6' 89.3 88 NOIR ROND 15' BLEU / BLUE 6' 93.9 87 BLACK ROUND 16' ORANGE 10" 93.4 89 18' BLEU / BLUE 10" 91. 82 "BSW"

LN15 NOIR À AILETTE 15' ORANGE 10" 88.3 89 BLACK SINGLE WING "O"

20' ORANGE 10" 81.1 95 LN16 22' ORANGE 10" 88.5 95 OBLOND ORANGE 24' ORANGE 10" 94.6 93 Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-01-09


Section:

Date effective:

G 52A

2014-01-09


Aspersion Sprinkler

DIFFUSEUR SPREADER SPINNER

LN12

LN16

LN13

LN14

LN15

OPTION ANTIBRUMISATION

ANTIMIST LN40 – LN41 LN42 – LN43

OPTION LN06-1

OPTION ANTI- DÉGOUTTEMENT

LEAK PREVENTION LN06-1

LN01

LN17

ADAPTATEUR 1/2" ADAPTER 1/2"

LN07

LV120

TUYAU POLY. POLY. TUBE

BAGUE 1/2" OU 1/2" X 3/4"

BUSHING 1/2" OR 1/2" X 3/4"

TUYAU PVC OU ALUMINIUM

PVC OR ALUMINUM PIPE

ALLONGE 1/2" OU 3/4" EXTENSION 1/2" OR 3/4"



Section:

Date effective:

G 52A

2014-01-09


PRESSION OPTIMUM 30 PSI OPTIMUM PRESSURE 30 PSI

Longueur maximum de buses espacées aux 3'

(perte max. 2 PSI ou V < 5'/sec.) Max. length of nozzle spaced at 3'

(max. loss 2 PSI or V < 5'/sec.) BUSES / NOZZLES

(# FOURNSSEUR / SUPPLIER #) CODE

HARNOIS PRESSION PRESSURE

DÉBIT GPH FLOW GPH

PVC 1/2" SCH. 40 AL. 1 1/4"

15 6.7 105' 300' VIOLET / VIOLET 20 7.8 90' 261'

0.032" LN04 25 8.7 81' 240' (#77-930504) 30 9.5 75' 210'

40 11.0 63' 192' 15 8.2 87' 242'

BRUN / BROWN 20 9.5 75' 210' 0.035" N/I 25 10.7 66' 195'

(#77-930500) 30 11.7 60' 189' 40 13.5 54' 177' 15 13.4 54' 177'

GRIS / GREY 20 15.5 45' 165' 0.044" LN05 25 17.3 39' 156'

(#77-930509) 30 19.0 36' 150' 40 21.9 36' 138' 15 20.0 36' 144'

VERT / GREEN 20 23.0 33' 132' 0.055" LN08 25 25.8 30' 126'

(#77-930502) 30 28.2 27' 117' 40 32.6 24' 105' 15 23.0 33' 132'

ORANGE / ORANGE 20 26.6 30' 120' 0.060" LN09 25 29.7 27' 111'

(#77-930505) 30 32.6 24' 105' 40 37.6 21' 93' 15 30.0 27' 111'

JAUNE / YELLOW 20 35.0 24' 99' 0.067" LN10 25 39.1 21' 90'

(#77-930506) 30 42.9 18' 84' 40 49.5 15' 72' 15 38.0 21' 93'

BLEU / BLUE 20 43.9 18' 81' 0.075" LN11 25 49.0 18' 72'

(#77-930503) 30 53.7 15' 66' 40 62.0 12' 57' 15 45.1 18' 78'

IVOIRE / IVORY 20 52.1 15' 69' 0.079" N/I 25 58.2 12' 63'

(#77-930501) 30 63.8 12' 57' 40 73.6 12' 51' 15 49.3 18' 72'

ROUGE / RED 20 56.9 12' 63' 0.087" N/I 25 63.7 12' 57'

(#77-930507) 30 69.7 12' 54' 40 80.5 9' 48' 15 57.6 12' 63'

NOIR / BLACK 20 66.5 12' 54' 0.094" N/I 25 74.3 12' 51'

(#77-930508) 30 81.4 9' 48' 40 94.0 9' 45'



Section:

Date effective:

G 52A

2014/01/09


Suggestions pour aspersion Suggestions for sprinkling Larguer table

en pieds SUR ALLONGE / UPRIGHT INVERSÉ 2' / INVERTED 2' INVERSÉ 4' / INVERTED 4' INVERSÉ 6' / INVERTED 6'

Bench width in feet

Diffuseur Spreader Antimist

Anti-dégout.LPD Leak

prevention



prevention



prevention


Anti-dégout. LPD Leak

prevention 4 LN12 LN40 LN06-1 LN12 LN40 LN06-1 5 LN12 LN40 LN06-1 LN12 LN41 LN06-1 6 LN12 LN41 LN06-1 LN12 LN41 LN06-1 7 LN13 LN41 LN06-1 LN12 LN41 LN06-1 8 LN13 LN41 LN06-1 LN12 LN41 LN06-1 LN14 LN40 LN06-1

10 LN13 LN40 LN06-1 LN14 LN41 LN06-1 LN14 LN41 LN06-1 12 LN15 LN41 LN06-1 LN14 LN41 LN06-1 LN14 LN41 LN06-1 14 LN15 LN41 LN06-1 LN13 LN41 LN06-1 LN13 LN41 LN06-1 15 LN15 LN41 LN06-1 LN13 LN41 LN06-1 LN13 LN41 LN06-1 16 LN15 LN41 LN06-1 LN13 LN41 LN06-1 LN13 LN41 LN06-1

SUGGESTIONS POUR BRUMISATION

MISTING SUGGESTIONS

TABLE BENCH ANTIMIST

ANTI-DÉGOUT. LPD

LEAK PREVENTION SUGGESTIONS POUR HUMIDIFIER

HUMIDIFYING SUGGESTIONS BUSE

NOZZLE CROIX CROSS


prevention

3 --- LN06-1 Intérieur léger / Indoor light fog 4 x LN21 LN30 LN06H 4 --- LN06-1 Intérieur médium / Indoor medium fog 4 x LN23 LN30 LN06H Aire ouverte / Open-air heavy fog 4 x LN26 LN30 LN06H

SUGGESTIONS POUR REFROIDIR COOLING SUGGESTIONS

@ 60 PSI

BUSE NOZZLE


prevention Léger / Light fog 1.6 gph LN21 LN06H Médium / Medium fog 3.2 gph LN23 LN06H Élevé / Heavy fog 5.2 gph LN26 LN06H Les Industries Harnois Inc., 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2014/01/09

Tel.: 450-756-1041 1-888-HARNOIS Fax.: 450-756-8389 www.harnois.com Page 5/7 U:\Catalogue PDF\G_52A.doc

Section:

Date effective:

G 52A

2014-01-09


Jets Nozzles POUR SERRE 25' ET 27' FOR GREENHOUSE 25' AND 27' LN06-1 – Adaptateur antidégouttement / Leak prevention device LN41 – Antibrumisation orange / Anti-mist device orange LN03 – Arc pour petit asperseur / Bridge for mini-sprinkler LN09 – Jet orange / Orange nozzle LN14 – Diffuseur noir rond / Black round spinner

30 PSI = 19. GPH 40 PSI = 20.9 GPH

POUR SERRE 30' FOR GREENHOUSE 30' LN06-1 – Adaptateur antidégouttement / Leak prevention device LN42 – Antibrumisation jaune / Anti-mist device yellow LN03 – Arc pour petit asperseur / Bridge for mini-sprinkler LN10 – Jet jaune / Yellow nozzle LN14 – Diffuseur noir rond / Black round spinner

30 PSI = 24.4 GPH 40 PSI = 27. GPH

NOTE: - ON PEUT AUSSI INVERSER LE JET NOIR - WE CAN ALSO INVERT BLACK NOZZLE - JETS AVEC ANTIBRUMISATION DÉBITENT MOINS D'EAU. SE RÉFÉRER À LA CHARTE - NOZZLE WITH ANTI-MIST DEVICE, THE FLOW IS LESSER. REFER TO THE CHART. Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2014-01-09


Section:

Date effective:

G 52A

2014-01-09


DIAMÈTRE DE LA BUSE EN PIEDS À 8" DE HAUTEUR THROW DIAMETER IN FEET AT 8" HEIGHT

Performance du diffuseur Spinner performance

Couleur Anti-mist Couleur buse

Pression Pressure

Débit Flow

Noir à ailettes Noir rond ORANGE

ANTI-INSECTE VERT/GREEN KIWI HEIGHT

Color Nozzle Color (PSI) (GPH) Black single wing

Black round

OBLONG INSECT PROOF 2 PI./FT 4 PI./FT 6 PI./FT

VIOLET VIOLET 0.032"

15 20 25 30 40

6.7 7.8 8.7 9.5

11.0

13.8 14.8 16.8 19.0 19.6

15.5 16.2 17.6 19.0 ---

--- --- --- --- ---

18.5 18.5 18.9 19.4 ---

15.5 16.2 17.6 19.0 20.0

17.2 17.8 19.3 20.8 22.8

18.9 19.4 21.0 22.5 22.8

BRUN

BROWN 0.035"

15 20 25 30 40

8.2 9.5

10.7 11.7 13.5

15.5 17.8 18.5 19.2 19.6

15.5 16.2 17.6 19.0 ---

--- --- --- --- ---

20.8 21.5 22.1 22.6 ---

15.5 16.2 17.6 19.0 20.0

18.9 19.4 20.9 22.4 22.8

20.7 21.0 22.8 24.4 22.8

GRIS GREY 0.044"

15 20 25 30 40

13.4 15.5 17.3 19.0 21.9

18.9 21.0 22.5 24.0 24.6

--- ---

18.4 19.0 ---

--- --- --- --- ---

20.8 21.5 22.9 24.2 ---

17.2 17.8 19.3 20.8 22.8

22.4 24.3 25.2 26.0 26.0

24.1 24.3 26.0 27.7 27.7

VERT

GREEN 0.055"

15 20 25 30 40

20.0 23.0 25.8 26.2 32.6

22.4 24.3 25.0 25.6 27.7

18.9 19.4 20.1 20.8 ---

--- 26.9 28.2 30.5 30.9

21.5 21.6 22.0 24.2 ---

18.9 19.4 21.8 24.2 24.2

22.4 24.3 25.2 26.0 27.4

25.8 26.9 28.8 27.7 27.7

VERT GREEN 0.035"

VERT GREEN 0.055"

20 25 30 40

9.4 9.9

10.9 11.8

--- --- --- ---

9.2 11.5 13.8 14.0

--- --- --- ---

9.2 10.4 11.5 12.9

--- --- --- ---

--- --- --- ---

--- --- --- ---

LN40 ORANGE ORANGE

0.060"

15 20 25 30 40

23.0 26.6 29.7 32.6 37.6

22.4 24.3 25.0 25.8 25.7

20.7 21.0 21.9 22.5

--- 27.5 29.0 30.5 30.9

21.5 21.5 23.8 26.0 ---

18.9 19.4 21.8 24.2 24.2

24.1 24.3 26.0 27.7 27.7

27.6 27.6 28.5 29.4 29.4

ORANGE ORANGE

0.047"

ORANGE ORANGE

0.060"

20 25 30 40

15.7 17.3 19.0 20.9

--- --- --- ---

15.4 16.7 18.0 18.0

--- --- --- ---

13.8 15.9 16.0 19.4

--- --- --- ---

--- --- --- ---

--- --- --- ---

LN41 JAUNE YELLOW

0.067"

15 20 25 30 40

30.0 35.0 39.1 42.9 49.5

22.4 24.3 25.0 25.8 27.7

--- --- --- --- ---

--- 29.1 29.8 30.5 30.9

--- --- --- --- ---

18.9 19.4 21.0 22.5 24.2

24.1 25.9 27.7 29.4 29.4

29.3 29.3 30.2 31.2 31.2

JAUNE YELLOW

0.055"

JAUNE YELLOW

0.067"

20 25 30 40

20.3 22.3 24.4 27.0

--- --- --- ---

15.4 16.7 18.0 18.5

--- --- --- ---

15.4 17.4 19.4 20.0

--- --- --- ---

--- --- --- ---

--- --- --- ---

LN42 BLEU BLUE 0.075"

15 20 25 30 40

38.0 43.8 49.0 53.7 82.0

24.1 25.9 26.6 27.2 29.2

--- --- --- --- ---

--- 30.8 31.5 32.1 32.5

--- --- --- --- ---

--- --- --- --- ---

--- --- --- --- ---

--- --- --- --- ---

BLEU BLUE 0.060"

BLEU BLUE 0.075"

20 25 30 40

27.5 29.7 32.6 35.5

--- --- --- ---

15.4 17.7 19.7 21.5

--- --- --- ---

16.9 19.0 21.0 21.5

--- --- --- ---

--- --- --- ---

--- --- --- ---

LN43 IVOIRE IVORY 0.079"

15 20 25 30 40

45.1 52.1 59.2 63.8 73.6

25.8 25.9 27.7 29.4 30.7

--- --- --- --- ---

--- 30.8 31.5 32.1 32.5

--- --- --- --- ---

--- --- --- --- ---

--- --- --- --- ---

--- --- --- --- ---

ROUGE

RED 0.087"

15 20 25 30 40

49.3 58.9 63.7 69.7 80.5

27.8 29.1 29.8 30.5 30.7

--- --- --- --- ---

--- 30.8 32.3 33.7 34.1

--- --- --- --- ---

--- --- --- --- ---

--- --- --- --- ---

--- --- --- --- ---

NOIR

BLACK 0.094"

15 20 25 30 40

57.6 66.5 74.3 81.4 94.0

27.6 30.8 31.9 32.9 35.1

--- --- --- --- ---

--- 32.4 33.9 35.3 35.7

--- --- --- --- ---

--- --- --- --- ---

--- --- --- --- ---

--- --- --- --- ---



Micro-irrigation



ToolPunch for tubing.

LN54PCHPUNCH FOR BARB 3.2MM


TubeStabilizer tube, assembled.

LN60CH12"TUBE ASSEMBLY/STABILIZERLN61CHDAN 18"TUBE ASS.C/W STAB

LN62CH24"TUBE ASSEMBLY/STABILIZER

LN64CHDAN 36"TUBE ASS. C/W STABLN65CH48"TUBE ASSY./STABILIZER


Micro tubing for extension

LN96-1PLSPVC MICRO TUBING 4/7


Union for tube

2015-05-15Page 1 / 2


Edition

Micro-irrigation


LN96CHBARB CONNECTOR FOR TUBE 4/7

2015-05-15Page 2 / 2


Edition

Section:

Date effective:

G 53A

2014-01-09


Arrosage Watering ARROSAGE DE TABLE + SUSPENDU / BENCH CROP + OVERHEAD WATERING Toujours: Anti-Mist – Jet – Déflecteur – 30 PSI – Espacement 36" Always: Anti-Mist – Nozzle – Spreader – 30 PSI – Spacing 36"

Buse et anti-mist Nozzle and anti-mist GR = vert / green OR = orange YE = jaune / yellow BL = bleu / blue Diffuseurs Spreader spinner Y = jaune / yellow B = noir / black GK = vert kiwi / green kiwi

LARGEUR DE TABLE / BENCH WIDTH 4' 5' 6' 7' 8' 10' 12'

Ensemble de jets Nozzle kit

LN46 GR-GR-Y

LN47 OR-OR-Y

LN47 OR-OR-Y

LN47 OR-OR-Y

LN53 GR-GR-B

LN53 GR-GR-B

LN53 GR-GR-B

Hauteur / Height 2' 2' 2' 2' 4' 6' 6'

ARROSAGE DE TABLE – SUR TIGE / BENCH CROP – UPRIGHT SPRINKLER MPT à spigot – Anti-Mist – Jet – Déflecteur – 35 PSI – Espacement 36" MPT spigot – Anti-Mist – Nozzle – Spreader – 35 PSI – Spacing 36" LARGEUR DE TABLE / BENCH WIDTH 4' 5' 6' 7' 8' 10' 12' Ensemble de jets Nozzle kit

LN46 GR-GR-Y

LN46 GR-GR-Y

LN47 OR-OR-Y

LN47 OR-OR-Y

LN49 OR-OR-GK

LN49 OR-OR-GK

Hauteur / Height 12" 12" 12" 12" 12" 12" ARROSAGE AÉRIEN – PLANTS AU SOL / COLD FRAME – IRRIGATION 35 PSI – Anti-Mist – Jet – Déflecteur 35 PSI – Anti-Mist – Nozzle – Spreader LARGEUR DE SERRE / GREENHOUSE WIDTH 14'-15'-16' 18'-20'-22' 24'-25'-26' 27'-28' 30'-32' 35' 40' Ensemble de jets Nozzle kit

LN48 YE-YE-GK

LN50 BL-BL-GK

LN52 YE-YE-B

LN52 YE-YE-B

LN51 BL-BL-B

LN50 BL-BL-GK

LN50 BL-BL-GK

Espacement Spacing 36" 36" 36" 36" 40" 36" 36"

Hauteur Height 48" 60" 60" 72" 72" 48" 60"

Nombre de ligne Number of line 1 1 2 2 2 2 2

Esp. entre lignes Spacing between lines 13' 14' 15' 17' 20'

Diamètre de ligne selon la longueur

Pipe sizing table according to the length Gallons par minute par ligne / Gallons per minute per line

LONGUEUR DE LIGNE / LINE LENGTH Jets / Nozzles 25 50 75 100 125 150 200

GR 620 1.5

620 3

620 4.5

690 6

690 7.5

3/4 9

1 12 Débit par jet

Flow by nozzle GR – vert / green – 11 gph OR – orange – 19 gph YE – jaune / yellow – 25 gph BL – noir / black – 35 gph

OR 620 2.7

640 5.4

3/4 8.1

1 10.8

1-1/4 13.5

1-1/4 16.2

1-1/4 21.6

YE 690 3.7

3/4 7.4

1 11.1

1-1/4 14.8

C-1 2x9.3

C1 2x11.1

C1-1/4 2x14.8

BL 3/4 5

1 10

1-1/4 15

C1 2x10

C1-1/4 2x12.5

C1-1/4 2x15

CC1 3x10



Overhead watering



SpinNet model

LMN01CHSPINET RED MIST RED BODY BLUELMN02CHSPINNET RED MIST RED BODY GREY


Micro tubing

LMN24ACH24"HANGING ASSEMBLY FOR SPRINK

LMN36CH36"HANGING ASSEMBLY FOR SPRINK

LMN48CH48"HANGING ASSEMBLY FOR SPRINK


Check valve

LMN02-ACHCHECK VALVE PURPLE PIN 28PSI

2014-11-03Page 1 / 1


Edition

Micro-irrigation accessories



CapVeha cap with gasket.

LV044CHCAP + GASKET 1-1/4


Drain valveVeha drain valve.Closes at 5 psi.

LV134CHDRAIN VALVE 1 1/4"-32mm


Standard inletEnd line water inlet.

XLV10CHADAPT.1"MPT X 1-1/4"MALE VEHA


Female couplingVeha female x tube 1-1/4" (gasket included).

LV034CH1-1/4 FEM. GASKET

2014-02-10Page 1 / 2


Edition

Micro-irrigation accessories



Gasket

LV101CHEPDM O'RING FOR 1 1/4"-32mm


Male couplingVeha male x female tube 1-1/4".

LV024CH1-1/4" MALE ONLY -32mm


UnionUnion 1-1/4" Veha assembled.

LV014CHPVC COUPLING 1 1/4 -32MM

2014-02-10Page 2 / 2


Edition

Fog



Parts

LM005CHBRASS NOZZLE W/ S.S ORIFICELM006CHNOZZLE ADAPTER MEE

LM007CHANTI-DRIP CHECK VALVE

2013-09-26Page 1 / 1


Edition

Overhead Aquaboom



Overhead AquaboomMotorized unit for watering boom. Included features: aluminum frame, 2-1/2" rubber-coated wheels, 1" water-hose inlet with 110 volts electric valve, 0-100 PSI pressure gage, 1" ball valve on each of the 2 boom outlets (adaptable to 3/4 or 1"), +/- 6" height adjustment of boom outlet.

XL0070-1: Fixed speed model, 18 feet per minute. Motor: 110VAC, 1/3 HP, 1 phase, 4.4 Amps.

XL0080: Variable speed model : -Speed control from 8 to 38 ft/min. -Manual start and automatic stop -One way or round way watering option -Ramp and water inlet flushing option. Motor 1/2 HP, 9.2 Amps, with variable frequency drive; 1 phase, 110VAC input.

XL0070-1CHOVERHEAD AQUABOOM FIX.SPEED

XL0080CHVS OVERHEAD AQUABOOM


TrackOverhead Aquaboom track for 10’ or 12’ support spacing, according to greenhouse.

3S340PLS10' SUSPENDED AQUABOOM RAIL

3S350PLS12' SUSPENDED AQUABOOM RAIL

2014-07-24Page 1 / 2


Edition

Overhead Aquaboom



Attachment kitHardware to attach an Aquaboom overhead track to the greenhouse structure. Choose kit according to the following chart:

------------------------------------ Structure ------------------------------------ 1-1/4" 1-1/4" Mini oval Rectang. trussSpacing Stiffener Square truss truss 1x2 10' 3S400 3S402 3S404 3S406 12' 3S401 3S403 3S405 3S407

3S400PLS1.25"-T ATTACH KIT AQUAB 10'SP

3S401PLS1.25"-T ATTACH KIT AQUAB 12'SP3S402PLSSQ-TRUSS ATTACH KIT AQUAB 10'S

3S403PLSSQ-TRUSS ATTACH KIT AQUAB 12'S

3S404PLSOV-TRUSS ATTACH KIT AQUAB 10'S3S405PLSOV-TRUSS ATTACH KIT AQUAB 12'S3S406PLSNG-TRUSS ATTACH KIT AQUAB 10'S

3S407PLSNG-TRUSS ATTACH KIT AQUAB 12'S


Limit switch stopperAllows you to modify the travel of the aquaboom by moving the limit switch (start and end travel). No tool necessary to modify the location of the limit switch.For overhead aquaboom only.

XL356-2CHLIMIT SWICTH STOPPER

2014-07-24Page 2 / 2


Edition

Section:

Date effective:

G 65A

2014-01-21

Aquaboom suspendu Overhead aquaboom

Feuille de travail Work sheet

NO. CLIENT: NO. COMMANDE: LIVRER À / SHIP TO: CUSTOMER NO.: ORDER NO.: CLIENT / CUSTOMER: TEL.: LIVRAISON: DATE VIA CONTACT: SHIP DATE: TEL.: FAX.: Date de la demande: Request date:

Date requise: Quote required by:

REPRÉSENTANT: REPRESENTATIVE:

Type de serre / Greenhouse model:

Largeur / Width:

Longueur / Length: Maximum 300 pieds / feet

NOTE: POUR RAMPES PLUS LARGE QUE 184", VÉRIFIER LA FAISABILITÉ NOTE: FOR BOOMS WIDER THAN 184", CHECK FEASIBILITY

A Hauteur entre les plants et le dessus du support de rail Height between plants and top of rail support

Si espacement jet = / If nozzle spacing = 12" "A" min. = 48-1/2" Si espacement jet = / If nozzle spacing = 15" "A" min. = 51-1/2"

B Hauteur jet-culture Height between nozzles and plants

Si espacement jet = / If nozzle spacing = 12" "B" = 15" Si espacement jet = / If nozzle spacing = 15" "B" = 18"

C Largeur de rampe chaque côté (min. 104" - max. 184" standard) Boom width each side

Conserver 6" d’espace libre en fin de rampe de chaque côté. Tracer une ligne sur l’échelle "C" selon le type. Keep 6" free at the end of boom on each side. Draw a cut line on "C" scale.

D Distance des jets Nozzles spacing

L’espacement réel des porte-buses pourrait être légèrement différent de votre choix. Un ajustement sera fait dans le but de rencontrer la largeur de rampe et le nombre de porte-buse.

Real nozzle spacing could be slightly different from choice made. An adjustment will be made to fit boom width with number of nozzle holders.

E Jet double pivotant au début Double swivel nozzle at boom entrance

Les jets situés sur le porte-buse double seront +/-2" plus bas que les autres jets. Le porte-buse double pivotant doit être fixé sur un porte-buse simple. Dans le cas ou vous utilisez une rampe avec porte-buses triples, le porte-buse du début et/ou de la fin sera changé pour un simple en usine.

Nozzles on double nozzleholders will be +/-2" lower than the others. The double swivel nozzleholder is fixed on a single nozzleholder. If a boom with triple nozzleholders is used, the entrance and/or end nozzleholder will be changed for a single one at the factory.

F Jet double pivotant à la fin Double swivel nozzle at boom end



Section:

Date effective:

G 65A

2014-11-21

Aquaboom suspendu Overhead aquaboom

Liste des composantes Components listing



Ground Aquaboom



Ground AquaboomMotorized unit for watering boom. Included features: aluminum frame, 2-1/2" rubber-coated wheels, 1" water-hose inlet with 110 volts electric valve, 0-100 PSI pressure gage, 1" ball valve on each of the two boom outlets (adaptable to 3/4 and 1"), adjustable height of boom outlet between 13 and 60" above wheels.

XL1000: Fixed speed model, 18 feet per minute. Motor: 110VAC, 1/3 HP, 1 phase, 4.4 Amps (Replaces XL004-1, XL001-1, XL002-1 and XL001-ECO models) XL1050: Variable speed model -Speed control from 8 to 38 ft/min. -Manual start and automatic stop -One way or round way watering option -Ramp and water inlet flushing option Motor: 1/2 HP, 9.2 Amps, with variable frequency drive; 1 phase, 110VAC input. (Replaces XL0040, XL0010, XL0020 and XL0050 models)

XL1000CHGROUND AQUABOOM 13/60 FIX.SPD.

XL1050CHGROUND AQUABOOM 13/60 VAR.SPD.

2014-07-24Page 1 / 1


Edition

Section:

Date effective:

G 68A

2014-01-21

Aquaboom au sol Ground aquaboom

Feuille de travail Work sheet

NO. CLIENT: NO. COMMANDE: LIVRER À / SHIP TO: CUSTOMER NO.: ORDER NO.: CLIENT / CUSTOMER: TEL.: LIVRAISON: DATE VIA CONTACT: SHIP DATE: TEL.: FAX.: Date de la demande: Date requise: REPRÉSENTANT: Request date: Quote required by: REPRESENTATIVE:

Type de serre / Greenhouse model:

Largeur / Width:

Longueur / Length: Maximum 150 pieds / feet

A Largeur d'allée (min. 18" – max. 24") Aisle width

Largeur standards 24" Standards width 24"

B Hauteur jet-culture Height between nozzles and plants

Si espacement jet = / If nozzle spacing = 12" "B" = 15" Si espacement jet = / If nozzle spacing = 15" "B" = 18"

C Largeur de rampe chaque côté(si+ large que 184" ajouter 3S0215) (min. 104" - max. 184" standard) Boom width each side (if wider than 184", add 3S0215)

Conserver 6" d’espace libre en fin de rampe de chaque côté. Tracer une ligne sur l’échelle "C" selon le type. Keep 6" free at the end of boom on each side. Draw a cut line on "C" scale.

D Distance des jets Nozzles spacing

L’espacement réel des porte-buses pourrait être légèrement différent de votre choix. Un ajustement sera fait dans le but de rencontrer la largeur de rampe et le nombre de porte-buse.

Real nozzle spacing could be slightly different from choice made. An adjustment will be made to fit boom width with number of nozzle holders.

E Jet double pivotant au début Double swivel nozzle at boom entrance

Les jets situés sur le porte-buse double seront +/-2" plus bas que les autres jets. Le porte-buse double pivotant doit être fixé sur un porte-buse simple. Dans le cas ou vous utilisez une rampe avec porte-buses triples, le porte buse du début et/ou de la fin sera changé pour un simple automatiquement en usine.

F Jet double pivotant à la fin Double swivel nozzle at boom end

Nozzles on double nozzleholders will be +/-2" lower than the others. The double swivel nozzleholder is fixed on a single nozzleholder. If a boom with triple nozzleholders is used, the entrance and/or end nozzleholder will be changed for a single one at the factory.



Section:

Date effective:

G 68A

2014-11-21

Aquaboom au sol Ground aquaboom

Liste des composantes Components listing



Ground Aquaboom track



Ground trackAquaboom tracks for on ground installation. 1-1/4" square tube galvanized steel. Track 24" apart, 12" high support every 6'.(For XL1000 - XL1050)

3S224PLSRAIL AQUABOOM 24"LAR <= 150'LG


Removable stopper

XL376CHLIMIT SWICTH STOPPER STARTXL377CHLIMIT SWICTH STOPPER END

2014-07-08Page 1 / 1


Edition

Aquaboom (parts)



Replacement partsReplacement parts for Aquaboom.

1R0501404 : Replacement motor for variable speed ground aquaboom

1R0501405 : Replacement motor for variable speed overhead aquaboom

1R0501404CHMOTOR LEESON 1/2HP 208V 3PH1R0501405CHMOTOR BLUE LINE 1/2HP 208V 3PH

XL325CH7" RAIL UNION

2015-03-30Page 1 / 1


Edition

Kit for irrigation



Valve on mainline 3/4"The 3XKIT01 includes:CK032CK288SB412007

3XKIT01CHVALVE ON MAINLINE 3/4"


Valve on mainline 1"The 3XKIT02 includes:CK033CK289SB412010

3XKIT02CHVALVE ON MAINLINE 1"


Valve on secondary line 3/4"The 3XKIT03 includes:CK032CK092CK202CK288SB412007

3XKIT03CHVALVE ON LINE 3/4"

2015-06-01Page 1 / 9


Edition

Kit for irrigation



Valve on secondary line 1"x3/4"The 3XKIT04 includes:CK032CK202CK288CK289CK541SB412007

3XKIT04CHVALVE ON LINE 1"X3/4"


Valve on secondary line 1"x1"The 3XKIT05 includes:CK033CK093CK203CK289SB412010

3XKIT05CHVALVE ON LINE 1"X 1"


Valve on secondary line 3/4"x1/2"The 3XKIT06 includes:CK031CK201CK286CK288CK540SB412005

3XKIT06CHVALVE ON LINE 3/4"X 1/2"

2015-06-01Page 2 / 9


Edition

Kit for irrigation



Valve on secondary line 1"x1/2"The 3XKIT07 includes:CK031CK201CK286CK289CK542SB412005

3XKIT07CHVALVE ON LINE 1"X 1/2"


Adding elect. valve 1"The 3XKIT08 includes:CF210020K557200AKF004

3XKIT08CHADD FOR ELECT.VALVE 1"


Adding elect. valve 3/4"The 3XKIT09 includes:CF207020CF439131K557200AKF004

3XKIT09CHADD FOR ELECT.VALVE 3/4"

2015-06-01Page 3 / 9


Edition

Kit for irrigation



Adding elect. valve 3/4" low flowThe 3XKIT10 includes:CF207020K4DV01KF004

3XKIT10CHADD FOR ELECT.VALVE 3/4"LOW FL


Adding regulator 3/4"The 3XKIT11 includes:CF207020CF405007CF430007CF439098Note: Regulator and pressure gauge not included

3XKIT11CHADD FOR REGULATOR 3/4"


Adding regulator 3/4" on pipe 1"The 3XKIT13 includes:CF207020CF405007CF430010CF439098CF439131Note: Regulator and pressure gauge not included

3XKIT13CHADD REGULATOR 3/4"ON TUBING 1"

2015-06-01Page 4 / 9


Edition

Kit for irrigation



Adding filter 3/4"The 3XKIT14 includes:CF430007KM390-13

3XKIT14CHADD FILTER 3/4"


Adding filter 1"The 3XKIT15 includes:CF430010KM3901-13

3XKIT15CHADD FILTER 1"


Adding injector 3/4"The 3XKIT16 includes:CK032CK092CK152CK288KPCM01SB412007

3XKIT16CHADD INJECTOR 3/4"

2015-06-01Page 5 / 9


Edition

Kit for irrigation



Adding injector 3/4"/pipe 1"The 3XKIT17 includes:CK032CK033CK152CK288CK289CK541KPCM01SB412007SB412010

3XKIT17CHADD INJECTOR 3/4"ON TUBING 1"


Adding 2nd injector in serialThe 3XKIT18 includes:CF430007CK032CK288KPCM01

3XKIT18CHADD OF 2ND INJECTOR IN SERIAL


Water inlet valve 3/4"The 3XKIT19 includes:CK052CK288SB50043

3XKIT19CHINLET VALVE 3/4"

2015-06-01Page 6 / 9


Edition

Kit for irrigation



Adapt. Veha on line 1"The 3XKIT20 includes:CF430010CK033XLV10

3XKIT20CHADAPT.VEHA ON LINE 1"


Fitting for pump outlet 1"The 3XKIT22 includes:CC105CC145CC705CK289CYC100ACYF100A

3XKIT22CHFITTINGS FOR OUTLET 1"ON PUMP


Second. end line 1"x1"The 3XKIT24 includes:CK033SB41110CK289CK153CK203

3XKIT24CHEND LINE ON 1"X 1"

2015-06-01Page 7 / 9


Edition

Kit for irrigation



Second. end line 1"x3/4"The 3XKIT25 includes:CK661CK032SB41107CK289CK288CK202

3XKIT25CHEND LINE ON 1"X3/4"


Second. end line 1"x1/2"The 3XKIT26 includes:SB41105CK289CK286CK153CK031CK201CK302

3XKIT26CHEND LINE ON 1"X 1/2"


Second. end line 3/4"The 3XKIT27 includes:CK152CK032SB41107CK288CK202

2015-06-01Page 8 / 9


Edition

Kit for irrigation


3XKIT27CHEND LINE ON 3/4"


Second. end line 3/4"x1/2"The 3XKIT28 includes:CK031SB41105CK288CK286CK660CK201

3XKIT28CHEND LINE ON 3/4"X 1/2"


Kit of Plasson valve on 3/4"The 3XKIT29 includes:CK288CK582SL1SL2

3XKIT29CHKIT OF PLASSON VALVE ON 3/4"


Kit of Plasson valve on 1"The 3XKIT30 includes:CK289CK584SL1SL2

3XKIT30CHKIT OF PLASSON VALVE ON 1"

2015-06-01Page 9 / 9


Edition

Aquaboom injector



Injection pumpMax. working pressure: 70 psi (4.82 bar)Max. fluid temperature: 130°F (54°C)Max. ambient temperature: 14° to 110°F (-10° to 43°C)Max. viscosity: 1,000 CentipoiseMax. suction lift: 10' water 0 psigOutput adjustment range: 5-100% stroke lengthDuty cycle: ContinuousEnclosure: NEMA type 3R, (IP23)115 VAC0.74 AMPFlow: 0.24 to 4.9 gph (0.95 to 18.9 lph)>>> Blue-White tank available on request

KPE1501CHINJECTION PUMP #C15N404X000V00


Parts for 1501

KPE1501-07CHFOOT VALVE S/A_C-340V.VTKPE1501-11CHTUBE INDICATOR GLASS 3/8"X5"

KPE1501-12CHTUBE NUT FOR 1500

KPE1501-1314CHADAPT.AND CATRIDGE BULLET ASSYKPE1501-15CHP/HEAD NOIR MOLDED P.P

KPE1501-17CHDIAPHRAGM

KPE1501-18CHRETURN SPRINGKPE1501-19CHSTIRR UP (PART #19)

KPE1501-20CHSLIDE BEARINGKPE1501-21CHOFFSET CAM (PART #21)KPE1501-29CHDRIVE CAM

KPE1501-31CHBRACKET WALL MOUNT FOR 1500KPE1501-32CHSPACER ROTOR

KPE1501-46CHFAN 1.80" (PART #46)

2014-10-30Page 1 / 2


Edition

Aquaboom injector


KPE1501-48CHBEARING BRACKET WITH BEARINGKPE1501-49CHROTOR ASSY.WITH SHAFT & SPACERKPE1501-50CHSTATOR STANDARD 115V.

KPE1501-54CHGEARBOX FOR 1500KPE1501-55CHINJECTION VALVE FOR 1500

KPE1501-56CHCOVER FOR 1501

2014-10-30Page 2 / 2


Edition

Section:

Date effective:

G 82A

2014-05-23

Pompe à injection Injection pump

Pièces Parts

# Pièces / Parts # Pièces / Parts # Pièces / Parts 7

11 12 13

13-14 14 15

KPE1501-07 KPE1501-11 KPE1501-12 KPE1501-13 KPE1501-1314 KPE1501-14 KPE1501-15

17 18 19 20 21 29 31


32 46 48 49 50 54 55




Section:

Date effective:

G 82A

2014-05-23


Pièces Parts

# Pièce Parts Description Qté

Qty



Nozzle holder



Swivel nozzle holderDouble swivel kit (nozzle not included), connects to a single nozzle holder.

XL120CHDOUBLE SWIVEL (SING.NOZ.BOOM)XL125CHDOUBLE SWIVEL (TRIP.NOZ.BOOM)


Single nozzle holder3/4" or 1'' saddle with single nozzle holder and drip stopping valve (nozzle not included).

XLH802CHSINGLE NOZZLE HOLDER 3/4" PIPE

XLH804CHUNIJET QUICK COUPLING 1"-1 BAR


Triple nozzle holder3/4" or 1" saddle with triple nozzle holder and drip stopping valve (nozzle not included).

XLH800CHTRIPLE NOZZLE HOLDER 3/4" PIPE

XLH805CH"1" 3-WAY NOZ.HOLDER / CAP


Quadruple nozzle holder

2013-12-17Page 1 / 2


Edition

Nozzle holder


XLH807CHFOURTH NOZ.HOLDER 3/4" PIPE

2013-12-17Page 2 / 2


Edition

Spraying system nozzle



BR, SS or VS nozzle80° brass nozzle(BR) or stainless steel(SS) or Visiflo(VS).Minimum operating pressure for SS or BR nozzle = 15 psiMinimum operating pressure for VS nozzle = 30 psiUse 100 mesh strainer with H18001-- or H180015-- nozzle and 50 mesh strainer with other nozzles.>>> UNTIL SUPPLIES LAST

H180015BRCHFLAT SPRAY TIP BRASSH18004BRCHFLAT SPRAY BRASS TIP

H18008BRCHFLAT SPRAY BRASS TIP


TR nozzle80° nozzle Total Range(TR).Minimum operating pressure = 30 psiUse 100 mesh strainer with H18001-- or H180015-- nozzle and 50 mesh strainer with other nozzles.

H180015TRCHTOTAL RANGE GREEN FLAT TIPH18001TRCHTOTAL RANGE ORANGE FLAT TIP

H18002TRCHTOTAL RANGE YELLOW FLAT TIP

H18003TRCHTOTAL RANGE BLUE FLAT TIPH18004TRCHTOTAL RANGE RED FLAT TIP

H18005TRCHTOTAL RANGE BROWN FLAT TIP

H18006TRCHTOTAL RANGE GRAY FLAT TIPH18008TRCHTOTAL RANGE WHITE FLAT TIP

H18010TRCHTOTAL RANGE FLAT TIP

H18015TRCHTOTAL RANGE FLAT TIP

2015-06-22Page 1 / 2


Edition

Spraying system nozzle



Plug

H13942CHBLANK PLUG BRASS


StrainerSteel strainer.

H25053-50CHSTRAINER ASSY.BRASS 50MESH


Cap>>> UNTIL SUPPLIES LAST

H21325CHCAP BRASS

2015-06-22Page 2 / 2


Edition

Section:

Date effective:

G 85A

2013-12-18

Buse Nozzle

Information technique Technical information

Couleur DÉBIT (GPM) / FLOW (GPM) Color 15 PSI 20 PSI 30 PSI 35 PSI 40 PSI 45 PSI 60 PSI

H18001-- Orange / Orange 0.06 0.07 0.09 0.094 0.1 0.11 0.12 H180015-- Vert / Green 0.09 0.11 0.13 0.14 0.15 0.16 0.18 H18002-- Jaune / Yellow 0.12 0.14 0.17 0.19 0.2 0.21 0.24 H18003-- Bleu / Blue 0.18 0.21 0.26 0.28 0.3 0.32 0.37 H18004-- Rouge / Red 0.24 0.28 0.35 0.37 0.4 0.42 0.49 H18005-- Brun / Brown 0.31 0.35 0.43 0.47 0.5 0.53 0.61 H18006-- Gris / Grey 0.37 0.42 0.52 0.56 0.6 0.64 0.73 H18008-- Blanc / White 0.49 0.57 0.69 0.75 0.8 0.85 0.98 H18010-- Métal / Metal 0.61 0.71 0.87 0.94 1 1.06 1.22 Nombre de buse maximum pour une vélocité maximum de 5 pieds/seconde Maximum number of nozzles for a maximum speed of 5 ft/sec

TUYAU 3/4" PIPE TUYAU 1" PIPE

MODÈLE DE BUSE NOZZLE MODEL

Espacement aux 12" Spacing

Nb max.


Nb max.


Nb max.


Nb max.

8001 17 20 24 24 80015 17 20 24 24 8002 17 20 24 24 8003 17 20 24 24 8004 16 16 24 24 8005 13 13 23 23 8006 10 10 19 19 8008 8 8 14 14 8010 6 6 11 11

Débit à 45 psi 45 PSI flow Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2013-12-18


Aquaboom hose



1" hoseHose without fitting.Maximum 150 psi.

BYS1000EPLS"ECONO" 1" RED HOSEBYS1190ECHEcono 1"X190'HOSE FOR AQUABOOM

BYS1300ECHEcono 1"X300'RED HOSE AQUABOOM

RMB005CHPARTIE MALE 1" HOSERMB006CHFEMALE PART FOR 1" HOSE


3/4" hoseHose without fitting.Maximum 200 psi.

BYS0700EPLS"ECONO"3/4"HOSEBYS07300ECH"ECONO" 3/4"X300' HOSE

SB58141CH3/4"MALE BRASS PRO HOSE

SB58142CH3/4"FEMALE BRASS PRO HOSE

2014-01-30Page 1 / 1


Edition

Aquaboom accessories



Cycle controllerThis controller has a manual start, giving the opportunity for the Aquaboom to make a forward-backward travel and stop automatically. 110 volts operation. For ground model; an electric valve is required.

XL009CHAUTOMATIC STOPPING CONTROL AQU


Controller for timerThis controller is used with 24 volts irrigation timer or computer. It starts the Aquaboom following the programmed schedule on the timer. At the end of the programmed cycle, the unit goes back to his original starting point. On the ground model, an electric valve is required.Including connections box, limit switch, relay.Note: Use with K557212 or K557201 valve if required.

XL008CHCONTROL.FOR TIMER-COMPUTER

2014-03-24Page 1 / 3


Edition




Remote controlThis multi-functions controller with its remote control, permits you to start, to return and to stop the Aquaboom up to a distance of 150 feet (45,7 meters). Also the controller gives you the following options:

IRRIGATION: - Forward and back (round-trip) - Forward only (one-way) - Irrigation off and draining

CYCLES: - Complete cycle (forward/back) then stop - Forward cycle then stop - Continuous cycle

This controller cannot be sold without transmitter.There are 2 choices:8HC800: Remote control up to 27 Aquaboom8HC802: Remote control 1 Aquaboom only

8HC800CHTRANSMITOR ALLSTAR OCS 278HC801CHRECIEVER ALLSTAR 120vac

8HC802CHTRANSMITOR ALLSTAR OCS 1

XL009-TELCHAUTOMATIC STOPPING CONTROL AQU


Electric wireFlexible 115 volts electric wire.

8ZL1230PLSCAP TIRE WIRE 12-38ZL1430PLSCAP TIRE WIRE 14-3

8ZL1630PLSFIL CAP TIRE 16-3

2014-03-24Page 2 / 3


Edition




Expandable sleeve1-1/4" expandable sleeve for hose and wire (add 25% to desired length).

BYT01PLSBLACK EXTENSIVE SLEEVE


Steel wireGalvanized steel cable for overhead Aquaboom.


2014-03-24Page 3 / 3


Edition

HGrowing equipments

Page Page title

73 Alarm system

13 Bench accessories

57 Black & white films

8 Fixed or mobile table

41 Fixtures

58 Ground cover

53 Growing accessories

42 Lamp parts

9 Ovaltech III benches

64 Palmberry

36 Pot shelf

74 ThermAlarm

2018-05-31 Page 1 / 1

Fixed or mobile table

Effective date: 2018-05-25Section: H 8


Table base

- Galvanized steel table on plate 3x9- Generally covered with expanded metal- Sold in length, multiple 6' length- Legs at 6' c/c- Standard widths available: 48", 60", 66", 72", 76" and 88"

3FP0632PLSBENCH BASE 32" x 6'c/c (48")







Table top

Table top for "Dramex" covering("Dramex" not included)

3F08481PLS48" BENCH TOP FOR DRAMEX 8'



3F08721PLS72" TABLE TOP FOR DRAMEX 8'



2018-05-28

Page 1 / 2



Edition




Hand crank

Rolling bench hand crank system sold separately.

3F050CHROLLING BENCH HAND CRANK

2018-05-28

Page 2 / 2



Edition

Section: H 8A



Loading capacity at square feet 48" 15 pounds

60" 12 pounds

66" 12 pounds

72" 10 pounds

76" 10 pounds

88" 8 pounds

Maximum displacement of mobile tables 48" 16"

60" 20"

66" 22"

72" 24"

76" 24"

88" 24"

Suggested "Dramex" for table width 48" 1KD1348

60" 1KD1349

66" 1KD1354

72" 1KD1350

76" 1KD1351

88" 1KD1359 Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2018-05-28


Ovaltech III benches



5' spacing

Side benches attached to the structure of the Ovaltech III greenhouse only. They have two shelves, as shown; the lower one is 44-1/2" deep, and the upper one is 22-1/4" deep. The customer decides of their length, by multiples of 5' or 6'. The loading capacity is 10 lbs/square foot.

3F172 OR 3F173: BENCH STRUCTUREThis kit contains: table frames to fix on the greenhouse's arches, 1-1/4" round tubing to support the Dramex covering (or standard 11" X 22" growing trays), and the required hardware.3F177 OR 3F178: TABLE EXTENSION KITThis kit contains 1-1/4" round and square tubing to extend the bench up to the greenhouse gable, when desired (see sales method below).3F180: TABLE END KITThis kit contains only steel angles to finish off the bench ends, when they aren't extended up to the gable.3F182 OR 3F183: DRAMEX KITContains Dramex covering for the two shelves, a plastic edge protector, and required hardware.

Sales method:1- Specify 3F172 or 3F173 length:Structure spacing must always be left between bench end and gable.Length = (greenhouse length – two 5' or 6' spacing), or any other smaller length that is a multiple of structure.2- Choose table endings:Choose, for every bench end, between a 3F177 or 3F178 kit to extend the bench up to the gable (the table will therefore be 5' or 6' longer for each extended end).3- Specify Dramex length, if required:The Dramex covering length needed is equal to the total bench length, including extensions to the gable, if any.

3F173PLS5'C/C SIDE TABLE FOR OVALT III

3F178CH5' TABLE EXTENS. KIT OVALT III

3F180CH5 & 6' TABLE END KIT OVALT III

3F183PLS5' TABLE DRAMEX KIT OVALT III

2018-05-28

Page 1 / 2



Edition

Ovaltech III benches



6' spacing

Side benches attached to the structure of the Ovaltech III greenhouse only. They have two shelves, as shown; the lower one is 44-1/2" deep, and the upper one is 22-1/4" deep. The customer decides of their length, by multiples of 5' or 6'. The loading capacity is 10 lbs/square foot.

3F172 OR 3F173: BENCH STRUCTUREThis kit contains: table frames to fix on the greenhouse's arches, 1-1/4" round tubing to support the Dramex covering (or standard 11" X 22" growing trays), and the required hardware.3F177 OR 3F178: TABLE EXTENSION KITThis kit contains 1-1/4" round and square tubing to extend the bench up to the greenhouse gable, when desired (see sales method below).3F180: TABLE END KITThis kit contains only steel angles to finish off the bench ends, when they aren't extended up to the gable.3F182 OR 3F183: DRAMEX KITContains Dramex covering for the two shelves, a plastic edge protector, and required hardware.

Sales method:1- Specify 3F172 or 3F173 length:Structure spacing must always be left between bench end and gable.Length = (greenhouse length – two 5' or 6' spacing), or any other smaller length that is a multiple of structure.2- Choose table endings:Choose, for every bench end, between a 3F177 or 3F178 kit to extend the bench up to the gable (the table will therefore be 5' or 6' longer for each extended end).3- Specify Dramex length, if required:The Dramex covering length needed is equal to the total bench length, including extensions to the gable, if any.

3F172PLS6'C/C SIDE TABLE FOR OVALT III

3F177CH6' TABLE EXTENS. KIT OVALT III

3F180CH5 & 6' TABLE END KIT OVALT III

3F182PLS6' TABLE DRAMEX KIT OVALT III

2018-05-28

Page 2 / 2



Edition

Bench accessories



Dramex (LD)

3/4" #13 regular galvanized metal mesh (not flattened).Flattened expanded metal available on special order only.

1KD1348CHDRAMEX 47-3/4"SWD X 95-3/4"LWD





1KD1355CH71 3/4"SWD X 44"LWD DRAMEX

1KD1356CH71 3/4"SWD X 21 3/4"LWD DRAMEX

1KD1357CH59 3/4"SWD X 44"LWD DRAMEX

1KD1358CH59 3/4"SWD X 21 3/4"LWD DRAMEX

1KD1359CH87-3/4"SWD X 95-3/4"LWD DRAMEX


Dramex (RD)

3/4" #13 galvanized expanded metal.

1KD1361CHDRAMEX 47 3/4LWD x 98 SWD 10Ga


Edge protector

Edge protector, white plastic 8' long.

5K110CHSIDE ANGLE PROTECTOR 8'

5K111CHPROTEC. CAP 1/8" X 8'

2018-05-28

Page 1 / 1



Edition

Pot shelf



Pots shelf

10' long steel galvanized gutter with bolts and nuts.Gutter can accommodate pots up to 5-1/4" diameter.Each ends are predrilled and cutted to join into one another.

3R001CH10' POT SHELF


End cap

End gutter (with bolts and nuts).

3R002CHSHELF END CAP


Starting endEnd gutter + coupling 1" F.P.T. (with bolts and nuts).

3R003CHPOT DRAIN END


Hook & chain

1C2899CH"S" HOOK 1-3/4" PLT

1N5181PLSCHAIN NO 45 (175 LBS)

2018-05-29

Page 1 / 1



Edition

Fixtures



In inventory

The housing is made of extruded aluminum for better heat dispersion and protected against UV. The reflectors are made of 99.95% aluminum that will guarantee the highest light output.

3F4121CHLAMP 400W 120V 4.2A DEEP

3F4122CHLAMP 400W 120V 4.2A MEDIUM



3F4203CHLAMP 400W 208V 2.4A WIDE









On request only

The housing is made of extruded aluminum for better heat dispersion and protected against UV. The reflectors are made of 99.95% aluminum that will guarantee the highest light output.

8F605CHCOMPLETE LAMP 600W 208V "WIDE"

8F606CHCOMPLETE LAMP 600W 240V "DEEP"


8F611CHCOMPLETE LAMP 600W 277V "MED"




8F617CHCOMPLETE LAMP 600W 480V "MED"

2018-05-29

Page 1 / 2



Edition

Fixtures



8F620CHCOMPLETE LAMP 600W 120V "ECO"






2018-05-29

Page 2 / 2



Edition

Section: H 41A


Calculation of lighting

General information To quickly find the number of lamps 400W or 430W necessary for a given surface, multiply the number of square feet or square meters of the section to be lighted by the corresponding factor to the wished lighting.

For number of light HPS 400W

For number of light HPS 430W

Nb LUX / M2 desired

Nb candle ft/m2 desired

#W / M2 P.A.R.

desired

Nb square ft X by a factor of:

Nb square meters X by a

factor of:

Nb square ft X by a factor of:

Nb square meters X by a

factor of: 3264 303 8 0,008 0,086 0,007 0,074

3672 341 9 0,009 0,097 0,008 0,084

4080 379 10 0,010 0,108 0,009 0,093

4488 417 11 0,011 0,118 0,010 0,102

4896 455 12 0,012 0,129 0,010 0,112

5304 493 13 0,013 0,140 0,011 0,121

5712 531 14 0,014 0,151 0,012 0,130

6120 569 15 0,015 0,161 0,013 0,140

6528 607 16 0,016 0,172 0,014 0,149

6936 645 17 0,017 0,183 0,015 0,158

7344 683 18 0,018 0,194 0,016 0,167

7752 721 19 0,019 0,205 0,016 0,177

8160 759 20 0,020 0,215 0,017 0,186

8568 797 21 0,021 0,226 0,018 0,195

8976 835 22 0,022 0,237 0,019 0,205

9384 873 23 0,023 0,248 0,020 0,214

9792 911 24 0,024 0,258 0,021 0,223

10200 949 25 0,025 0,269 0,022 0,233

10608 987 26 0,026 0,280 0,022 0,242

11016 1025 27 0,027 0,291 0,023 0,251

11424 1063 28 0,028 0,301 0,024 0,260

11832 1101 29 0,029 0,312 0,025 0,270

12240 1139 30 0,030 0,323 0,026 0,279

12648 1177 31 0,031 0,334 0,027 0,288

13056 1215 32 0,032 0,344 0,028 0,298



Section: H 41A



General information

STANDARD LIGHT LEVELS FOR CROPS

Crop Lux Micromols Foot candles

Tomatoes / Cucumbers

12,000 – 15,000 160 – 200 1100 – 1400

Lettuce 6,000 – 8,000 80 – 105 550 – 750

Herbs 7,500 100 700

Propagation 6,000 – 6,500 80 – 85 550 – 600

Daytime extension 3,800 50 350

Photo period / Night interruption

110 – 160 1 – 2 10 – 15



Section: H 41A



General information

Electronic vs. Magnetic Fixtures Advantages of Electronic

5% lower power consumption Less decrease in bulb output over first 10 000 hours 50% lighter in weight than magnetic Operate at a cooler temperature Creates less shade than magnetic

Disadvantages of Electronic

Sensitive to power fluctuation Higher replacement cost after warranty: new printplates (ballasts) are expensive Higher initial capital investment Higher installation cost: more expensive breakers needed to handle inrush current Long delivery times: roughly 12-16 weeks Light bulbs are more expensive

Advantages of Magnetic

Proven product: used for over 30 years Lower maintenance cost: defective parts can be identified and replaced Lower installation cost: no special breakers needed Designed to withstand power fluctuation up to +/- 10% and maintain same light

output Heat from fixture assists in heating of greenhouse Better delivery times, roughly 3 weeks Replacement light bulbs are less expensive

Disadvantages of Magnetic

Higher power consumption Heavy (31 lbs each) Creates more shade than electronic



Lamp parts



Ignitor

8F010CHADVANCE IGNITOR 1000W


Reflector

8F420CHDEEP REFLECTOR

8F422CHWIDE REFLECTOR

8F423CHECOMAX REF2.5 4 6 7.5 WATTS

8F424CHECOMAX REFLECTOR FOR 1000 W


Bulb

8F426CHBULB 600 WATT


Advance capacitor

2018-05-29

Page 1 / 3



Edition

Lamp parts


8F011CHCAPACITOR ADVANCE 1000W


Track

8F018CHALUM TRACK 24'


Track support

3F034: With tube3F035: With truss

3F034CHKIT FIXATION HARNOIS

3F035CHKIT FIXATION


Track union

2F014CHRAIL HALF COUPLING


Accessories

2018-05-29

Page 2 / 3



Edition

Lamp parts


8F430CH"C"BRACKET Galv & NUT AND bolt

2018-05-29

Page 3 / 3



Edition

Growing accessories



Stem clip

8D75CHTC-20 TOMATO CLIP


Stake twinePlastic twine for stake the plantations of tomatoes, cucumbers or others.

8D90CHPOLI-TWINE CLEAR/GREEN 14000'


Tomato hook

Vertical reversible model, galvanized steel.

8D73CHVERTICAL TOMATO'S HOOK


Reinforcement of stalk

Minimize stem damages by crop overweight.

8D71CHTRUSS SUPPORT

2018-05-29

Page 1 / 2



Edition

Growing accessories



Support of stalk

8D72ACHJOBU "C"HOOK

2018-05-29

Page 2 / 2



Edition

Black & white films



4 mil films

Black and white ground film (4 mil).

5BGN0412PLSPOLY BLACK/WHITE 4mil 12'WIDE

5BGN0426PLSPOLY BLACK/WHITE 4mil 26'WIDE


6 mil films


5BGN0616PLSPOLY BLACK/WHITE 6 MIL.16'WIDE




9 mil films





2018-06-05

Page 1 / 2



Edition

Black & white films



Polyethylene skirt

Polyethylene skirt for hydroponic culture trenches.Black and white.Untreated UV.Thickness: 0.0055"

5AE62410CHFILM BLACK/WHITE 5.5m24"X1000'

5AE63010CHFILM BLACK/WHITE.006 30"X1000'

2018-06-05

Page 2 / 2



Edition

Ground cover



Black ground cover

"SUNSTONE" ground cover100 g/square meterPolypropylene 19x11 with lines at each 12"Permeability: 15 liters/sqare meter/sec.

5AL012RLSBLACK GR/COVER 12 ft X 300 ft

5AL012-1PLSBLACK GROUNDCOVER 12' WIDE

5AL0149RLSBLACK GR/COVER 14.9f/wx300ft/L

5AL0149-1PLSGROUNDCOVER BLACK 14'9" WIDE


With seam

"SUNSTONE" ground cover100 g/square meterPolypropylene 19x11 with lines at each 12"Permeability: 15 litres/sqare meter/sec.





White ground cover"LS SVENSSON" ground cover100 g/square meter100% polypropylene with blue lines at each 25 cmPermeability: 10 litres/sqare meter/sec.

5AL13.5RLSWHITE GR COVER 13.5' X 300'

2018-05-29

Page 1 / 2



Edition

Ground cover


5AL13.5-1PLSWHITE GR COVER 13.5'


Anchor for ground coverAllows to secure ground cover.

5AF0CHANCHOR FOR GROUND COVER

2018-05-29

Page 2 / 2



Edition

Palmberry



Palmberry

A complete solution range for your hydroponics vegetables crops.Coconut fibres a natural product.Coconut is an edible product that has been feeding humans for centuries. It is of a real benefice for the whole humanity. It has an excellent image for customer.

Bag dimensions Liter Substratum Bags/palletMIX18L 50x24x15 18 Mix 600MIX21.6L 120x20x 9 21.6 Mix 520MIX21.6LC 120x20x 9 21.6 Crush 420MIX22L 100x20x11 22 Mix 465MIX22LC 100x20x11 22 Crush 430

>>> Available only on pallet.>>> PRICE ON REQUEST ACCORDING TO QUANTITIES

MIX18LCHPALMBERRY MIX 18 LITERS

MIX21.6LCHPALMBERRY MIX 21.6 LITERS

MIX21.6LCCHPALMBERRY CRUSH 21.6 LITERS

MIX22LCHPALMBERRY MIX 22 LITERS

2018-05-29

Page 1 / 1



Edition

Section: H 64A


Palmberry

Palmberry product range Available only by the pallet. Lead time, approximately 8 to 10 weeks. PALMBERRY growbags PALMBERRY coco blocks are presented in compressed slabs. The rigid plate of coco fiber is sheathed in a UV treated white/black polyethylene bag which will reduce algae growth and temperature variations. 1. Substrates There are five types of substrates presented in slab:

Name Composition Characteristics PALMBERRY Semis Fine Propagating and vegetable crops

PALMBERRY Peat Med Fine All around substrate

PALMBERRY Mix Mix of short fibers, crush and particles Draining substrate

PALMBERRY Crush Coarse Very draining substrate

PALMBERRY C-Max Extra coarse Most draining substrate PALMBERRY Peat Mix of particles and raw fibres for the best air/water ratio while keeping an optimum buffer capacity. 22% air after drainage*. Large flexibility due to its good water retention which makes it perfectly suited for hydroponic tomato

crops. Structure tends to be more vegetative in summer and more generative in winter. Cultures: tomatoes (long watering), cucumbers, zucchini, eggplants... PALMBERRY Mix Mix of calibrated fibers, crush and particles. 28% air after drainage. Great homogeneity with quick and dense root development. Adapted to all culture situations. Draining substrate with satisfactory water retention. Cultures: peppers, tomatoes (short watering intervals), roses… PALMBERRY Crush Mix of crush coco (obtained by cutting and grinding). 37% air after drainage. High drainage product with high reactivity and a very stable structure that makes it especially suitable for

long turn around. Draining substrate with generative tendency. Cultures: tomatoes (very short watering intervals), roses… Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2018-05-29


Section: H 64A


Palmberry

Palmberry product range PALMBERRY C-Max Mix of crush, chips and calibrated fibres (obtained by cutting and grinding). The most fibrous and airy of

current coco substrates. 40% air after drainage. Very good aeration which allows watering in winter without fear of excess. Most draining version, best

suited to highly specialized and technical crop management. Cultures: gerberas, anthurium, roses (very short watering intervals)… *: Drying is the technical term for the dewatering or drainage that occurs after the slabs were irrigated. 2. PALMBERRY options PALMBERRY substrates can be delivered with two types of options: options that aim to generate labor savings at the time of the crop start-up and options to improve the performance of growbags. OPTIONS TO GENERATE LABOR SAVINGS: A. Precut openings (standard: 3 openings of 10cm x 10 cm) which will decrease the time to set up the crop,

while having openings perfectly placed and avoiding plastic waste in the greenhouse. The dimensions can be customized without charge.

B. Drip holes: the slab is provided with perforations with a diameter allowing regular drip irrigation, which will

facilitate humidification and expansion of block, while improving water distribution, drainage and aeration of the hydroponic crop. Essential if the growbag is provided with slots or drainage holes.

C. Slots and dripper openings for a better distribution of the nutrient solution in the growbag. D. Slots and drainage holes allow for a perfect and uniform drainage. OPTIONS TO IMPROVE THE PERFORMANCE OF SUBSTRATES: E. OPTIS slabs (vertical notches on the sides) facilitate aeration of the substrate and the drainage of water.

Interesting option for off-season crops (tomato crops under artificial lighting). Enquire about additional cost per bag.

F. ULTRA slabs (with slots on bottom of the block) improve drying of block and maintain impeccable root

state until last day of culture (no water stagnation and an optimal aeration of the substrate). G. Aeration holes increase the aeration of the block. Similar to OPTIS option. OPTIONS A, B, C, D, F AND G ARE STANDARD AND OFFERED AT NO ADDITIONAL COSTS ON PALMBERRY PRODUCTS DISTRIBUTED BY HARNOIS. Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2018-05-29


Section: H 64A


Palmberry

Palmberry product range Others Palmberry products A. Strawberries series, hydroponic PALMBERRY Straw series allows real optimizing of your hydroponic strawberry crop and significant savings in labor.

Our substrates are especially adapted for soilless strawberry crops from tray-plants, mini-tray, seedling plants and bare root plant (fresh and refrigerated).

The very high aeration of the PALMBERRY Straw series and its ability to easily drain allow for greater flexibility in crop management.

The PALMBERRY Straw series comes in bags, ready to use, and in bulk for crop trays.

Growbags: they come in a compressed plank that, with expansion, will form a parallelepiped with a flat surface. The bag is in UV treated black/white polyethylene. It is equipped with circular planting holes, drippers holes, on each end for T-Tape and drainage holes on the underside. Dimensions : 100cm x 20cm x 10cm, 8/10/12 plants

Coco slabs: they will completely occupy the volume of the container after expansion. Dimensions : slabs 50cm x 20cm x 10cm, 4/5/6 plants

For tray-plants, the coco slabs have pre-planting holes that will facilitate, after expansion, the establishment of the culture. B. Pucks The difficulty of finding labor in the agricultural sector and the desire to facilitate the tasks to be performed reinforce the interest of PALMBERRY products, which improve the set-up of the substrate: a time saving often greater than 50% while avoiding additional investment in a potting machine, and reducing trays and pots handling…

This product will occupy the desired volume, after its expansion

Puck D20/23: raspberries in pot Puck D 14: gerberas in pot Puck D10: strawberries in pot C. 30 x 30 PALMBERRY blocks Product range specially designed for the use of coco in « bulk » form. 30 x 30 PALMBERRY BLOCK, 4.5 kg Liters/kg Liters/block Qty/pal. Blocks / 40’ PALMBERRY block Fine (particles 5 mm) 15 67.5 272 5440 blocks

PALMBERRY block Med-Fine (particles & fibers 15mm) 17 76.5 272 5440 blocks

PALMBERRY block Coarse (medium crush 0.7 cm) 16 72 216 4320 blocks

PALMECO block Extra coarse (rough crush 1 cm) 18 81 216 4320 blocks Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2018-05-29


Section: H 64A


Palmberry

Palmberry product range D. Start-up of substrate blocks 1. Place the substrate on level ground or on a crop support designed for this purpose. To allow better

drainage of substrate, a slight slope is essential. 2. If necessary, center the coco plate in the bag for a harmonious development of the substrate (equivalent

plastic margin on each side of the bag). 3. Place drippers horizontally, piercing the envelope if bag is not pre-cut (dripper inside the bag towards the

ends) or stick them into the holes provided for this purpose. 4. To get the best expansion, make split waterings over a period of a few hours. 5. Let expand 24 to 72 hours. 6. Create drainage slots in the bottom of the bag in the direction of flow (openings should be made

vertically). 7. Do not hesitate to drain until you obtain the desired conductivity for the crop. 8. Remove the drippers and create openings in the bag (slot, square, round …) depending on the number

and the type of plants. 9. Pre-planting for tomato crops being careful that the roots cannot reach the substrate. 10. Plantation of the crop: must have good contact between the plant and the substrate. The use of coco fiber for soilless cultures does not alter the type of fertigation required compared to perlite or mineral wool: apply best practices to ensure proper plant nutrition, maintain adequate pH to support good absorption and a drainage rate above 20%… Waterings should be tailored to the structure of the chosen substrate. In general, the coco substrates require short watering at a relatively steady rate (can be adapted according to the needs of the crop, the climatic conditions and the type of substrate). This information is for reference only and should not replace the advice of an agronomist. Crop management must be adapted to each situation. For more information, please contact us. Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2018-05-29


Alarm system



Sensaphone 400

INPUT ZONES:- Flexible inputs that support: Normally open or normally closed contacts Temperature sensors: - 20*F to 150*F 4 channels in the model 400- Automatic input type configuration- Programmable recognition times- Internal calibrationALARM NOTIFICATION:- 4 phone numbers in the model 400- Makes voice phone calls with customized messages for easy identification- Built-in alarm test function to simulate and test the notification process- Includes telephone line seizureVOICE MESSAGES:- Built in vocabulary for keypad programming and sensor readings- Record custom voice phrases in your own voice to describe each input zone- Record site identification messageMICROPHONE- Internal microphone for custom voice message recording- Monitor high sound alarms- Microphone can also be used for remote listen-in featureOUTPUT RELAY- Low voltage NO/NC output relay included- Manual or automatic alarm response switchingREMOTE ACCESS:- Call in with any Touch-Tone phone to check the status of all monitored conditions- Make programming changes remotely from any Touch-Tone phone- Remotely control the output relayLOCAL ACCESS:- Keypad and speaker for local programming- Easy voice-prompted programming- Password-protected to restrict programming accessCOMPATIBILITY:- The Sensaphone 400 is a direct replacement for the model 1104 and "CottageSitter"POWER SUPPLY:- Comes with plug-in power supply- 24 hour battery backup using 6 size C alkaline batteries (not included)- Automatically monitors for power failure alarms- International power options availableBUILT IN "COTTAGESITTER" CONTROL: The built in relay can be used to remotely change the temperature of a dual setback thermostat.

8C217CHSENSAPHONE 400 FOUR CHANNEL

2018-05-29

Page 1 / 4



Edition

Alarm system



Sensaphone 800

INPUT ZONES:- Flexible inputs that support: Normally open or normally closed contacts Temperature sensors: - 20*F to 150*F 8 channels in the model 800- Automatic input type configuration- Programmable recognition times- Internal calibrationALARM NOTIFICATION:- 8 phone numbers in the model 800- Makes voice phone calls with customized messages for easy identification- Built-in alarm test function to simulate and test the notification process- Includes telephone line seizureVOICE MESSAGES:- Built in vocabulary for keypad programming and sensor readings- Record custom voice phrases in your own voice to describe each input zone- Record site identification messageMICROPHONE- Internal microphone for custom voice message recording- Monitor high sound alarms- Microphone can also be used for remote listen-in featureOUTPUT RELAY- Low voltage NO/NC output relay included- Manual or automatic alarm response switchingREMOTE ACCESS:- Call in with any Touch-Tone phone to check the status of all monitored conditions- Make programming changes remotely from any Touch-Tone phone- Remotely control the output relayLOCAL ACCESS:- Keypad and speaker for local programming- Easy voice-prompted programming- Password-protected to restrict programming accessCOMPATIBILITY:- The Sensaphone 800 is a direct replacement for the model 1108POWER SUPPLY:- Comes with plug-in power supply- 24 hour battery backup using 6 size C alkaline batteries (not included)- Automatically monitors for power failure alarms- International power options availableBUILT IN "COTTAGESITTER" CONTROL: The built in relay can be used to remotely change the temperature of a dual setback thermostat.

8C218CHSENSAPHONE 800 - 8 CHANNEL

2018-05-29

Page 2 / 4



Edition

Alarm system


Web600

ALARM NOTIFICATION METHODS:- E-mail, text messages, SMS- 8 alarm escalation levels- Comprehensive scheduling per input, profile, and alarm destinationDESTINATIONS:- 8 programmable user profiles- 4 programmable alarm destinations per profilesCOMMUNICATION TYPES:- E-mail - SMS- Test messages- Web page - supported formats HTTP, PDA, WAP, and XML- SNMP - MIB with traps, GET, GETNEXT, and SET- MODBUS®/TCP slave conformance class 0 and 1COMMUNICATION PORTS:- Ethernet 10/100 base-tINPUT:- 6 universal inputs - Normally closed/normally open dry contact - Temperature sensor >>>> #8C214-1 - 4-20m A current loop- 12 bit resolutionRELAY OUTPUT:- Rated for 1A 30VAC/ 1A 30VDC maximumDATA LOGGING:- 32,000 samples (all samples include data date and time)- 1 second to 1 month sampling rate- User programmable channel selection - Zones 1 - 6 - Battery - Input powerSTANDARDS:- FCC part 15-B compliantLOCAL INDICATORS:- Alarm status LED- Power status LED- Ethernet link and activity LEDsPOWER REQUIREMENTS:- 120V AC 50/60Hz (standard)- Optional battery backup, module (FGD-W610-B) >>>> #8C2182- Provides 2 hours of backupOPERATING CONDITIONS:- 0-90% RH, non-condensing- 0-50°C (32-122°F)PHYSICAL PROPERTIES:- 5,5" x 3.25" x 1.25"- 0.5 lbs

2018-05-29

Page 3 / 4



Edition

Alarm system



8C2181CHSENSAPHONE WEB 600

8C2182CHBATTERY BACK UP FOR WEB SENSA


SensorTemperature sensor resistant to weathering (for 8C217 and 8C218)

8C214-1CHWEATHERPROOF TEMP. SENSOR

2018-05-29

Page 4 / 4



Edition

ThermAlarm



Alarm

6 volts-DC electronic alarm for Thermalarm.

8ZE731CHELECTRONIC ALARM 6-28VDC


ThermalarmAlarm system warns you when temperature is anormally up or down. It is a must to protect your crop.Thermometer 6" diameter.Double adjustment for low and high temperature.Use with alarm and 6 volts-DC battery.Alarm: 6 V-DC.

8C200CHALARM THERMOMETER

2018-05-29

Page 1 / 1



Edition

IInstruments

Page Page title

5 Flowmeter

16 Hygrometer

1 Pressure gauge

15 Thermometer

2018-05-14 Page 1 / 1

Pressure gauge

Effective date: 2018-04-27Section: I 1


Heavy duty pressure gauge

These water pressure gauges can be permanently installed on equipments or pipe, used with needle adapter or Pitot tube for measuring pressure on nozzle output. Threaded 1/4" MPT. Oil filled gauge for a better resistance to the vibrations.Psi and Kpa graduation.

DF2003CHGAUGE LIQUID FILLED 0- 30psi

DF2006CHGAUGE LIQUID FILLED 0- 60psi

DF2010CHGAUGE LIQUID FILLED 0-100psi




Dial pressure gauge

2-1/2" dial pressure gauge.

DF5003CHVACUUM GAUGE -30 TO 0 Hg inch


Standard pressure gauge

Economic pressure gauge, 1/4" MPT.

DF1003CHPRESSURE GAUGE STD 0-30psi




DF1020CHPRESSURE GAUGE STD 0-200PSI

2018-05-02

Page 1 / 2



Edition

Pressure gauge



Needle for pressure gauge

Installation of needle check adapter avoids damaging pressure gauge and minimizes number of gauges required. Interior lip closes under pressure. Use of pressure gauge equipped with special needle allows a constant pressure reading at anytime. Operating up to 140 psi.Needle for pressure gauge (1/4" FPT) #LR02Adapter for needle check (1/4" MPT) #LR01

LR01CHPRESSURE CHECK POINT METAL COM

LR01-ACHRUBBER GROMMET FOR CHECK POINT

LR02CHPRESSURE CHECK NEEDLE


Transducer

Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology.

8HD0005: Precision de 0.25%

8HD0015: Presicion de 1%8HD0030: Precision de 1%8HD0050: Presicion de 1%8HD0100: Precision de 1%

8HD0000CHPROBE PROTECTOR

8HD0005CHTRANSDUCTOR 0-5





2018-05-02

Page 2 / 2



Edition

Flowmeter



In-line flowmeter

Flowmeter for on-line insertion; calculates the injection of fertilizing or flow water.

KPF44375CHFLOWMETER 0-1GAL.1/2"MPT POLY

KPF44375-ACHO'RING FOR FLOWMETER F44375LH8

2018-04-30

Page 1 / 1



Edition

Thermometer



Bi-metal thermometer

Used to verify the temperature of the ground during the production and during steam disinfection. Very fast reaction to temperature change.8" of stalk.# 8C040 graded from 25 to 125F (-4C to 50C)

>>> UNTIL SUPPLIES LAST

8C040CHTHERMOMETER BI-METAL 25 A 125


Harnois thermometer

Air-ground thermometer (for inside or outside use).Graded from 0F to 120F and -20C to 50C.

8C011CHAIR/ SOIL THERMOMETER HARNOIS

2018-05-15

Page 1 / 1



Edition

Hygrometer



Hygrometer

Quickly measures relative humidity (outdoor or indoor). Very precise. Use distilled water and add a drop of chlorine. Instructions included.Includes spare wick.

8C111CHHANGING HYGROMETER

2018-04-30

Page 1 / 1



Edition

KPumps & accessories

Page Page title

21 Backflow preventer

7 Flow switch

2018-05-14 Page 1 / 1

Flow switch

Effective date: 2018-04-27Section: K 7


Flow switch

Installation on tee with 1" outlet; blades according to pipe size (1 to 6"). Open or close function; adjustable according to flow.

8ZAFS43CHFLOW SWITCH

8ZAFS43PCHBLADES' KIT FOR FS43

2018-05-01

Page 1 / 1



Edition

Backflow preventer

Effective date: 2018-04-27Section: K 21


# 7 backflow preventer

Backflow preventer for residential irrigation system. Protection of the primary water supply. Bronze body. For system without chemical injection.Pressure loss 5 psi at 15 gpm.


K702CHDUAL CHECK VALVE 1"

2018-05-01

Page 1 / 1



Edition

LAluminum pipes & fittings

Page Page title

5 Aluminum parts

2018-05-14 Page 1 / 1

Aluminum parts

Effective date: 2018-04-27Section: L 5


.125" aluminum pipe

BA94PLSTUBE ALUM. 4" O.D. X .125

BA96PLSTUBE ALUM. 6" O.D. X .125


Sch40 aluminum pipe

Aluminum pipe schedule 40 (riser type).

BA0700PLS3/4" RISER PIPE

BA1010CHRISER ALUM.SCHED.40 1" X10'

BA1210CHRISER ALUM.SCHED.40 1-1/4"X10'

2018-05-02

Page 1 / 1



Edition

MPoly. & galvanized fittings

Page Page title

60 "Kamlock" fitting

42 Clamp

45 Elbow for polyethylene

55 Galvanized bushing

56 Galvanized cap & plug

52 Galvanized coupling

54 Galvanized cross & tee

53 Galvanized elbow

57 Galvanized flange

58 Galvanized nipple

80 Garden hose

1 IPS PVC pipe

47 Plug for polyethylene

43 Polyethylene adapter

44 Polyethylene coupling

40 Polyethylene pipe

83 Pressure hose

30 PVC cement

2 PVC pipe

11 Sch. 40 - PVC adapter

15 Sch. 40 - PVC bushing

16 Sch. 40 - PVC cap

12 Sch. 40 - PVC coupling

14 Sch. 40 - PVC cross & tee

13 Sch. 40 - PVC elbow

10 Sch. 40 - PVC pipe

17 Sch. 40 - PVC union

21 Sch. 80 - PVC adapter

25 Sch. 80 - PVC bushing

26 Sch. 80 - PVC cap

22 Sch. 80 - PVC coupling

24 Sch. 80 - PVC cross & tee

23 Sch. 80 - PVC elbow

2018-05-31 Page 1 / 2

Page Page title

27 Sch. 80 - PVC flange & union

28 Sch. 80 - PVC nipple

20 Sch. 80 - PVC pipe

46 Tee for polyethylene

31 Teflon tape

91 Traveller hose

2018-05-31 Page 2 / 2

IPS PVC pipe

Date effective: 2013-11-26Section: M 1


160 psi pipe to be stuckSDR26 / 160 psi (water at 23°C (73.4°F) max.)UV untreatedMust be buried

BF92060CHWHITE PVC BE 2" X 20' SDR26

BF92560CHWHITE PVC BE 2-1/2"X20' SDR 26

BF93062CHWHITE PVC BE 3" X 20' SDR 26BF94060CHWHITE PVC BE 4" X 20' SDR 26


200 psi pipe to be stuckSDR26 / 200 psi (water at 23°C (73.4°F) max.)UV untreatedMust be buried

BF51260CHWHITE PVC PE 1-1/4"X20' 200PSIBF51560CHWHITE PVC 1-1/2"X20' 200PSI

2013-12-12Page 1 / 1


Edition

PVC pipe



Pipe for assemblyWhite PVC pipe, RECOVERYVarious thicknesses (120 psi, 160 psi, 200 psi or sch. 40) for assembly


BP0505CHPVC 40 PIPE 1/2" X 5' WHITE

BP0510CHPVC 40 PIPE 1/2" X 10' WHITEBP0710CHPVC PIPE 3/4" X 10' WHITE

BP1205CHWHITE PVC PIPE 1-1/4"X5'160PSI

BP1505CHPVC PIPE 1-1/2" X 5' WHITEBP1510CHPVC PIPE 1-1/2" X 10' WHITEBP2505CHPVC PIPE 2-1/2" X 5' WHITE

BP3010CHPVC PIPE 3" X 10' WHITEBP4005CHPVC PIPE 4" X 5' WHITE

BP4010CHPVC PIPE 4" X 10' WHITE

2015-06-18Page 1 / 1


Edition

Sch. 40 - PVC pipe



Bell-endSch. 40 PVC white pipe with bell-end. UV untreated. Resistance to pressure is reduced of 50% with use of threaded couplings.DIAM. MAX. PSI1-1/2" 3302" 2803" 2604" 220

BF71560CHWHITE PVC PE 1-1/2"X20' SCH 40

BF72060CH2"SCH.40PVC PIPE(WHITE)-20'BOE

BF73060CH3"SCH.40PVC PIPE(WHITE)-20'BOEBF74060CHWHTE PVC PE 4"X20' SCH. 40


StandardSch. 40 PVC white pipe with standard end. UV untreated. Resistance to pressure is reduced of 50% with use of threaded couplings.DIAM. MAX. PSI1/2" 6001" 450

BF70560CH1/2"SCH.40 PVC PIPE(WHITE)-20'

BF71060CHWHITE PVC PE 1"X20' SCH 40.

2015-06-01Page 1 / 1


Edition

Sch. 40 - PVC adapter



Female adapterSlip x FPT adapter.White sch. 40 PVC.

CF435005CHFEM.ADAPT.1/2"SLIPxFPT PVC 40CF435007CHFEM.ADAPT.3/4"SLIPxFPT PVC 40

CF435010CHFEM.ADAPT.1" SLIPxFPT PVC 40

CF435012CHFEM.ADAPT.1 1/4"SLIPxFPT PVC40CF435015CHFEM.ADAPT.1 1/2"SLIPxFPT PVC40

CF435020CHFEM.ADAPT.2" SLIP xFPT PVC 40CF435025CHFEM.ADAPT.2 1/2"SLIPxFPT PVC40CF435030CHFEM.ADAPT.3" SLIPxFPT PVC 40


Male adapterSlip x MPT adapter.White sch. 40 PVC.

CF436005CHMALE ADAPT.1/2"SLIPxMPT PVC 40CF436007CHMALE ADAPT.3/4"SLIPxMPT PVC 40CF436010CHMALE ADAPT.1" SLIPxMPT PVC 40

CF436012CHMALE ADAPT 1 1/4"SLIPxMPTPVC40CF436015CHMALE ADAPT.1 1/2"SLIPxMPTPVC40

CF436020CHMALE ADAPT. 2"SLIPxMPT PVC 40

CF436025CHMALE ADAPT.2 1/2"SLIPxMPTPVC40CF436030CHMALE ADAPT. 3" SLIPxMPT PVC 40

2014-03-26Page 1 / 2


Edition




Reduced male adapterSlip x MPT reduced adapter.White sch. 40 PVC.

CF436169CHREDUCING M.ADAPT.1-1/4X1-1/2

2014-03-26Page 2 / 2


Edition

Sch. 40 - PVC coupling



Slip couplingSlip x slip coupling.White sch. 40 PVC.

CF429060: UNTIL SUPPLIES LAST

CF429005CHCOUPLING SLIP 1/2" PVC 40

CF429007CHCOUPLING SLIP 3/4" PVC 40CF429010CHCOUPLING SLIP 1" PVC 40

CF429012CHCOUPLING SLIP 1-1/4" PVC 40

CF429015CHCOUPLING SLIP 1-1/2" PVC 40CF429020CHCOUPLING SLIP 2" PVC 40CF429025CHCOUPLING SLIP 2-1/2" PVC 40

CF429030CHCOUPLING SLIP 3" PVC 40CF429060CHCOUPLING SLIP 6" PVC 40


Threaded couplingFPT x FPT coupling.White sch. 40 PVC.

CF430005CHTHREADED COUPLING 1/2" PVC 40CF430007CHTHREADED COUPLING 3/4" PVC 40

CF430010CHTHREADED COUPLING 1" PVC 40

2015-06-30Page 1 / 1


Edition

Sch. 40 - PVC elbow



22 degrees elbowWhite PVC elbow, 22 degrees, schedule 40. IPS slip socket x slip socket.


CF416010CH22-1/2* ELBOW SLIP PVC40 1"

CF416015CH22-1/2* ELBOW SLIP PVC40 1-1/2

CF416030CH22-1/2* ELBOW SLIP PVC40 3"CF416040CH22-1/2* ELBOW SLIP PVC40 4"




CF417005CH45* ELBOW S X S PVC40 1/2"CF417007CH45* ELBOW S X S PVC40 3/4"

CF417012CH45* ELBOW S X S PVC40 1-1/4"

CF417015CH45* ELBOW S X S PVC40 1-1/2"CF417020CH45* ELBOW S X S PVC40 2"


CF417040CH45* ELBOW S X S PVC40 4"


90 degrees elbowWhite PVC elbow, 90 degrees, schedule 40. IPS, FPT x FPT.

CF408005CH90*ELBOW(FPTxFPT)PVC40 1/2"

2015-06-29Page 1 / 3


Edition

Sch. 40 - PVC elbow


CF408007CH90*ELBOW(FPTxFPT)PVC40 3/4"CF408010CH90*ELBOW(FPTxFPT)PVC40 1"CF408012CH90*ELBOW(FPTxFPT)PVC40 1-1/4"

CF408015CH90*ELBOW(FPTxFPT)PVC40 1-1/2"


90 degrees elbowWhite PVC elbow, 90 degrees, schedule 40. IPS, MPT x FPT.

CF412007CH90*STREET ELBOW MxF PVC40 3/4"

CF412010CH90*STREET ELBOW MxF PVC40 1"


90 degrees elbowWhite PVC elbow, 90 degrees, schedule 40. IPS slip socket x FPT.

CF407007CH90*ELBOW(SLIPxFIPT)PVC40 3/4"CF407012CH90*ELBOW(SLIPxFIPT)PVC40 1-1/4

CF407015CH90*ELBOW(SLIPxFIPT)PVC40 1-1/2

CF407020CH90*ELBOW(SLIPxFIPT)PVC40 2"CF407030CH90*ELBOW(SLIPxFIPT)PVC40 3"



CF406040: UNTIL SUPPLIES LASTCF406060: UNTIL SUPPLIES LASTCF406080: UNTIL SUPPLIES LAST

CF406005CH90* ELBOW S X S PVC40 1/2"

2015-06-29Page 2 / 3


Edition

Sch. 40 - PVC elbow


CF406007CH90* ELBOW S X S PVC40 3/4"CF406010CH90* ELBOW S X S PVC40 1"CF406012CH90* ELBOW S X S PVC40 1-1/4"


CF406025CH90* ELBOW S X S PVC40 2-1/2"

CF406040CH90* ELBOW S X S PVC40 4"CF406060CH90* ELBOW S X S PVC40 6"CF406080CH90* ELBOW S X S PVC40 8"


90 degrees elbowWhite PVC elbow, 90 degrees, schedule 40. IPS slip socket x spigot end.

CF409015CH90* STREET ELBOW (S)40 1-1/2"CF409020CH90* STREET ELBOW (S) PVC40 2"

2015-06-29Page 3 / 3


Edition

Sch. 40 - PVC cross & tee



CrossWhite PVC cross, schedule 40. IPS slip socket ends.


CF420007CHCROSS SLIP -3/4" PVC 40

CF420012CHCROSS SLIP - 1-1/4" PVC 40

CF420015CHCROSS SLIP - 1-1/2" PVC 40CF420020CHCROSS SLIP - 2" PVC 40

CF420030CHCROSS SLIP - 3" PVC 40

CF420040CHCROSS SLIP - 4" PVC 40


Threaded teeFemale PVC threaded tee.

CF405005CHTEE FPT 1/2" PVC40

CF405007CHTEE FPT 3/4" PVC40CF405010CHTEE FPT 1" PVC40CF405015CHTEE FPT 1-1/2" PVC40


Slip reduced FPT teeWhite PVC tee, schedule 40. IPS slip socket x FPT x slip socket.


CF402101CHTEE SLIP PVC40 3/4" X 1/2" FPTCF402131CHTEE SLIP PVC40 1" X 3/4" FPT

CF402166CHTEE SLIP PVC40 1-1/4"X1/2" FPT

2015-06-29Page 1 / 3


Edition



CF402168CHTEE SLIP PVC40 1-1/4" X 1" FPTCF402210CHTEE SLIP PVC40 1-1/2"X3/4" FPTCF402211CHTEE SLIP PVC40 1-1/2" X 1" FPT

CF402247CHTEE SLIP PVC40 2" X 1/2" FPTCF402248CHTEE SLIP PVC40 2" X 3/4" FPT

CF402249CHTEE SLIP PVC40 2" X 1" FPT

CF402251CHTEE SLIP PVC40 2" X 1-1/2" FPTCF402288CHTEE SLIP PVC40 2-1/2" X3/4"FPTCF402335CHTEE SLIP PVC40 3" X 1" FPT

CF402417CHREDUCING TEE SLIP 4"x 1"FPT


Slip tee x FPT x slipWhite PVC tee, schedule 40. IPS slip socket x FPT x slip socket.

CF402005CHTEE SLIP PVC40 1/2" X 1/2" FPT

CF402007CHTEE SLIP PVC40 3/4" X 3/4" FPT

CF402020CHTEE SLIP PVC40 2" X 2" FPT


Slip reduced teeWhite PVC tee, schedule 40. IPS slip socket x reduced slip x slip socket.


CF401102CHTEE SLIP PVC40 3/4"X3/4"X1"CF401131CHTEE SLIP PVC40 1" X 3/4"CF401168CHTEE SLIP PVC40 1-1/4" X 1"

CF401210CHTEE SLIP PVC40 1-1/2" X 3/4"CF401211CHTEE SLIP PVC40 1-1/2" X 1"

CF401247CHTEE SLIP PVC40 2" X 1/2"

CF401248CHTEE SLIP PVC40 2" X 3/4"CF401249CHTEE SLIP PVC40 2" X 1"

CF401251CHTEE SLIP PVC40 2" X 1-1/2"

2015-06-29Page 2 / 3


Edition



CF401290CHTEE SLIP PVC40 2-1/2" X 1-1/4"CF401291CHTEE SLIP PVC40 2-1/2" X 1-1/2"CF401292CHTEE SLIP PVC40 2-1/2" X 2"

CF401334CHTEE SLIP PVC40 3" X 3/4"CF401335CHTEE SLIP PVC40 3" X 1"

CF401337CHTEE SLIP PVC40 3" X 1-1/2"

CF401338CHTEE SLIP PVC40 3" X 2"CF401420CHTEE SLIP PVC40 4" X 2"


Slip teeWhite PVC tee, schedule 40. IPS slip socket x slip x slip socket.


CF401005CHTEE SLIP PVC40 1/2"CF401007CHTEE SLIP PVC40 3/4"CF401010CHTEE SLIP PVC40 1"

CF401012CHTEE SLIP PVC40 1-1/4"

CF401015CHTEE SLIP PVC40 1-1/2"CF401020CHTEE SLIP PVC40 2"

CF401025CHTEE SLIP PVC40 2-1/2"CF401030CHTEE SLIP PVC40 3"CF401040CHTEE SLIP PVC40 4"

CF401080CHTEE SLIP PVC40 8"

2015-06-29Page 3 / 3


Edition

Sch. 40 - PVC bushing



Slip x spigot bushingWhite PVC reducer, schedule 40. IPS slip socket x spigot end.


CF437131CHREDUC.SLIP 1"x3/4" PVC 40CF437168CHREDUC.SLIP 1 1/4"x1" PVC 40

CF437210CHREDUC.SLIP 1 1/2"x3/4" PVC 40CF437211CHREDUC.SLIP 1 1/2"x1" PVC 40CF437212CHREDUC.SLIP 1-1/2"x1-1/4" PVC40

CF437247CHREDUC.SLIP 2"x1/2" PVC 40

CF437249CHREDUC.SLIP 2'x1" PVC 40CF437251CHREDUC.SLIP 2"x1-1/2" PVC 40

CF437291CHREDUC.SLIP 2-1/2"x1-1/2" PVC40CF437292CHREDUC.SLIP 2-1/2"x2" PVC 40CF437334CHREDUC.SLIP 3"x3/4" PVC 40

CF437338CHREDUC.SLIP 3"x2" PVC 40

CF437420CHREDUC.SLIP 4"x2" PVC 40CF437422CHREDUC.SLIP 4"x3" PVC 40

CF437530CHREDUC.SLIP 6"x3" PVC 40


FPT x spigot bushingWhite PVC reducer, schedule 40. IPS FPT x spigot end.


CF438098CHREDUC.3/4"SLPx1/4"FPT PVC 40CF438101CHREDUC.3/4"SLPx1/2"FPT PVC 40CF438127CHREDUC. 1"SLP.x1/8"FPT PVC 40

CF438130CHREDUC. 1"SLP.x1/2"FPT PVC 40

2015-06-29Page 1 / 2


Edition



CF438131CHREDUC. 1"SLPx3/4" FPT PVC 40CF438167CHREDUC.1-1/4"SLPx3/4"FPT PVC40CF438168CHREDUC.1-1/4"SLPx1"FPT PVC 40

CF438209CHREDUC.1-1/2"SLPx1/2"FPT PVC 40CF438210CHREDUC.1-1/2"SLPx3/4"FPT PVC 40

CF438211CHREDUC. 1-1/2"SLPx1"FPT PVC 40

CF438212CHREDUC.1-1/2"SLPx1-1/4"FPTPVC40CF438248CHREDUC.2"SLPx3/4"FPT PVC 40CF438249CHREDUC.2"SLIPx1" FPT PVC 40

CF438251CHREDUC.2"SLPx1-1/2" FPT PVC 40CF438292CHREDUC.2-1/2"SLPx2" FPT PVC 40

CF438334CHREDUC.3"SLPx 3/4" FPT PVC 40

CF438338CHREDUC.3"SLPx2" FPT PVC 40CF438420CHREDUC.4"SLPx2" FPT PVC 40


MPT x FPT bushingWhite PVC reducer, schedule 40. IPS FPT x MPT.

CF439071CHREDUC.1/2"MPTx1/8" FPT PVC 40

CF439072CHREDUC.1/2"MPTx1/4" FPT PVC 40CF439073CHREDUC.1/2"MPTx3/8" FPT PVC 40

CF439098CHREDUC.3/4"MPTx1/4" FPT PVC 40

CF439101CHREDUC.3/4"MPTx1/2" FPT PVC 40CF439130CHREDUC.1"MPTx1/2" FPT PVC 40

CF439131CHREDUC.1"MPTx3/4" FPT PVC 40CF439167CHREDUC.1-1/4"MPTx3/4" FPT PVC40

CF439168CHREDUC.1-1/4"MPTx1" FPT PVC 40

CF439209CHBUSHING 1-1/2"MPT x 1/2"FPTCF439210CHBUSHING 1-1/2"MPT x 3/4"FPTCF439211CHREDUC.1-1/2"MPTx1" FPT PVC 40

CF439212CHREDUC.1-1/2"MPTx1-1/4"FPTPVC40CF439249CHREDUC.2"MPTx1"FPT PVC 40

CF439250CHREDUC.2"MPTx1-1/4" FPT PVC 40

CF439251CHREDUC.2"MPTx1-1/2" FPT PVC 40

2015-06-29Page 2 / 2


Edition

Sch. 40 - PVC cap



Threaded capWhite PVC cap, schedule 40. IPS FPT.

CF448005CHCAP 1/2" FPT PVC 40CF448007CHCAP 3/4" FPT PVC 40

CF448010CHCAP 1" FPT PVC 40

CF448012CHCAP 1-1/4" FPT PVC 40CF448015CHCAP 1-1/2" FPT PVC 40

CF448020CHCAP 2" FPT PVC 40

CF448025CHCAP 2-1/2" FPT PVC 40CF448030CHCAP 3" FPT PVC 40


Threaded capWhite PVC cap, schedule 40. IPS MPT.

CF450005CHPLUG 1/2"MPT PVC 40

CF450007CHPLUG 3/4" MPT PVC 40CF450010CHPLUG 1" MPT PVC 40

CF450012CHPLUG 1-1/4" MPT PVC 40CF450015CHPLUG 1-1/2" MPT PVC 40CF450020CHPLUG 2" MPT PVC 40

CF450030CHPLUG 3" MPT PVC 40

2015-06-30Page 1 / 2


Edition

Sch. 40 - PVC cap



Female capWhite PVC cap, schedule 40. IPS slip.


CF447005CHCAP FEMALE SLIP 1/2" PVC 40

CF447007CHCAP FEMALE SLIP 3/4" PVC 40

CF447010CHCAP FEMALE SLIP 1" PVC 40CF447012CHCAP FEMALE SLIP 1-1/4" PVC 40

CF447015CHCAP FEMALE SLIP 1-1/2" PVC 40

CF447020CHCAP FEMALE SLIP 2" PVC 40CF447025CHCAP FEMALE SLIP 2-1/2" PVC 40

CF447030CHCAP FEMALE SLIP 3" PVC 40

CF447040CHCAP FEMALE SLIP 4" PVC 40CF447060CHCAP FEMALE SLIP 6" PVC 40

2015-06-30Page 2 / 2


Edition

Sch. 40 - PVC union



Union (slip)PVC union (slip), schedule 40.

CF457005CHUNION (SLIP) 1/2" PVC 40CF457007CHUNION (SLIP) 3/4" PVC 40

CF457010CHUNION (SLIP) 1" PVC 40

CF457012CHUNION (SLIP) 1-1/4" PVC 40CF457015CHUNION (SLIP) 1-1/2" PVC 40


CF457025CHUNION (SLIP) 2-1/2" PVC 40CF457030CHUNION ( SLIP) 3"PVC 40


Threaded unionPVC threaded union, schedule 40.

CF458015CH1-1/2"FPT UNION PVC CED.40

2013-10-29Page 1 / 1


Edition

Sch. 80 - PVC pipe



StandardSch. 80 PVC gray pipe with standard end. UV untreated. Resistance to pressure is reduced of 50% with use of threaded couplings.DIAM. MAX. PSI1/2" 8503/4" 6901" 6301-1/4" 5201-1/2" 4702" 4002-1/2" 4203" 3704" 300

BF80730CHGRAY PVC PE 3/4" X 10' SCH.80

BF80760CH3/4"SCH.80PVC PIPE(GREY)-20 FTBF81060CHGRAY PVC PE 1" X 20' SCH.80

BF81260CHGRAY PVC PE 1-1/4" X 20'SCH.80BF81560CH1-1/2"SCH.80PVC(GREY)- 20 FT

BF82060CHGRAY PVC PE 2" X 20' SCH. 80BF83060CHGRAY PVC PE 3" X 20' SCH. 80BF84060CHGRAY PVC BE 4" X 20' SCH. 80

2014-03-25Page 1 / 1


Edition




Female adapterSlip x FPT adapter.Gray sch. 80 PVC.

CF835005CHFEM.ADAPT. 1/2"SLIPxFPT PVC80CF835010CHFEM.ADAPT.1" SLIP xFPT PVC 80

CF835020CHFEM.ADAPT.2" SLIP xFPT PVC 80


Male adapterSlip x MPT adapter.Gray sch. 80 PVC.

CF836005CHMALE ADAPT.1/2"SLIPxMPT PVC 80CF836007CHMALE ADAPT.3/4"SLIPxMPT PVC 80

CF836010CHMALE ADAPT. 1"SLIPxMPT PVC 80CF836012CHMALE ADAPT 1 1/4"SLIPxMPTPVC80

CF836025CHMALE ADAPT.2 1/2"SLIPxMPTPVC80

CF836030CHMALE ADAPT.3"SLIPxMPT PVC 80

2013-12-11Page 1 / 1


Edition

Sch. 80 - PVC coupling



Slip couplingGray PVC coupling, schedule 80.IPS slip socket x slip socket.

CF829010CHCOUPLING SLIP 1" PVC 80CF829012CHCOUPLING SLIP 1-1/4" PVC 80

CF829015CHCOUPLING SLIP 1-1/2" PVC 80

CF829020CHCOUPLING SLIP 2" PVC 80CF829030CHCOUPLING SLIP 3" PVC 80

CF829040CHCOUPLING SLIP 4" PVC 80


Reduced couplingGray PVC reduced coupling, schedule 80.

CF829131CHD02ACF829168CHREDUCER COUPLING 1-1/4"X1" 80

CF829212CHREDUCER COUPLING 1-1/2"X1-1/4"

CF829422CHREDUCER COUPLING 4" X 3"PVC80


Threaded couplingGray PVC threaded coupling, schedule 80.

CF830003CHCOUPLING FPT 3/8"SCHEDULE 80

CF830007CHCOUPLING FPT 3/4"SCHEDULE 80

CF830010CHCOUPLING FPT 1"SCHEDULE 80CF830015CHCOUPLING FPT 1-1/2"SCHEDULE 80

CF830020CHCOUPLING FPT 2"SCHEDULE 80

2014-04-01Page 1 / 1


Edition

Sch. 80 - PVC elbow



45 degrees elbowGray PVC elbow, 45 degrees, schedule 80. IPS slip socket x slip socket.

CF817020CH45* ELBOW SLIP 2" PVC 80CF817030CH45* ELBOW S X S PVC80 3"

CF817040CH45* ELBOW S X S PVC80 4"


90 degrees elbowGray PVC elbow, 90 degrees, schedule 80. IPS slip socket x slip socket.

CF806007CH90* ELBOW SLIP 3/4"SCD 80

CF806010CH90* ELBOW SLIP 1"SCD 80CF806020CH90* ELBOW SLIP 2" PVC 80CF806030CH90* ELBOW SLIP 3" PVC 80CF806040CH90* ELBOW SLIP 4" PVC 80


45 degrees elbowGray PVC elbow, 45 degrees, schedule 80. IPS, FPT x FPT.

CF819007CH45* ELBOW FPT.X FPT.3/4"PVC 80

2014-07-08Page 1 / 2


Edition

Sch. 80 - PVC elbow



90 degrees elbowGray PVC elbow, 90 degrees, schedule 80. IPS, FPT x FPT.

CF808002CH90* ELBOW FPT.X FPT.PVC 80 1/4CF808010CH90* ELBOW FPT.X FPT.PVC 80 1"

CF808015CH90* ELL FPT.X FPT.PVC 80 1.5"

CF808020CH90* ELBOW FPT.X FPT.PVC 80


90 degrees elbowGray PVC elbow, 90 degrees, schedule 80. IPS slip socket x FPT.

CF807010CH90*ELBOW(SLIPxFIPT) PVC80 1"

2014-07-08Page 2 / 2


Edition




CrossGray PVC cross, schedule 80. IPS slip socket ends.

CF820007CHCROSS SLIP 3/4"PVC 80


Threaded teeGray PVC tee, schedule 80. IPS FPT x FPT x FPT.

CF805002CHTHREADED TEE 1/4" PVC 80CF805010CHTHREADED TEE 1" PVC 80


Slip reduced FPT teeGray PVC tee, schedule 80. IPS slip socket x FPT x slip socket.

CF802248CHTEE SLIP 2" X 3/4" FPT PVC80


Slip reduced teeGray PVC tee, schedule 80. IPS slip socket x reduced slip x slip socket.


CF801131CHREDUCING TEE 1"X 1"X3/4" SCH80

CF801420CHRED.SLIP TEE 4" X 2"PVC80

2015-08-04Page 1 / 2


Edition




Slip teeGray PVC tee, schedule 80. IPS slip socket x slip socket x slip socket.


CF801010CHTEE SLIP 1" PVC 80

CF801020CHTEE SLIP 2" PVC 80

CF801030CHTEE SLIP PVC80 3" PVC80CF801040CHTEE SLIP 4" PVC 80

2015-08-04Page 2 / 2


Edition




Slip x spigot bushingGray PVC reducer, schedule 80. IPS slip socket x spigot end.

CF837131CHREDUC.SLIP 1"x3/4" PVC 80CF837211CHREDUC.SLIP 1-1/2"X1" SCH.80

CF837249CHREDUC.SLIP 2'x1" PVC 80

CF837338CHREDUC.SLIP 3" X 2" PVC 80CF837420CHREDUC.SLIP 4"x2" PVC 80

CF837422CHREDUC.SLIP 4"X 3" PVC 80

CF837532CHREDUC.SLIP 6" X 4" PVC 80


FPT x spigot bushingGray PVC reducer, schedule 80. IPS FPT x spigot end.

CF838098CHREDUC.SLIP 3/4"X1/4"FPT PVC 80

CF838210CHREDUC.SLIP 1-1/2"X3/4" FPT 80

CF838211CHREDUC.SLIP 1-1/2"X1" FPT PVC80CF838248CHREDUC.2"SLPx3/4" FPT PVC 80

CF838250CHREDUC.2"SLPx1-1/4" FPT PVC 80CF838292CHREDUC.SLIP 2-1/2"X 2" FPT 80CF838336CHREDUC.3"SLPx1-1/4"FPT PVC 80


MPT x FPT bushingGray PVC reducer, schedule 80. IPS FPT x MPT.

CF839098CHREDUC.3/4"MPTx1/4" FPT PVC80

2014-07-08Page 1 / 2


Edition



CF839131CHREDUC.1"MPTx3/4" FPT PVC80CF839210CHBUSHING 1-1/2"MPT x 3/4"FPT 80CF839248CHBUSHING 2"MPT x 3/4"FPT 80

CF839338CHREDUC.3"MPTx2"FPT PVC 80

2014-07-08Page 2 / 2


Edition

Sch. 80 - PVC cap



Threaded capGray PVC cap, schedule 80. IPS FPT.

CF848020CHCAP 2" FPT PVC 80CF848030CHCAP 3" FPT PVC 80


Female capGray PVC cap, schedule 80. IPS slip.

CF847010CHCAP FEMALE SLIP 1" PVC 80

2015-08-04Page 1 / 1


Edition

Sch. 80 - PVC flange & union



FlangeGray PVC flange, schedule 80. IPS slip socket.

CF854007CHFLANGE LOOSE RING 3/4" PVC80CF854020CHFLANGE (LOOSE RING) 2" PVC80

CF854025CHFLANGE(SLIP) 2-1/2"PVC80

CF854030CHFLANGE (LOOSE RING) 3" PVC 80CF854040CHFLANGE (LOOSE RING) 4" PVC 80


UnionGray PVC union, schedule 80. IPS slip socket x slip socket.

CF857007CHUNION (SLIP) 3/4" PVC 80CF857010CHUNION (SLIP) 1" PVC 80CF857015CHUNION (SLIP) 1-1/2" PVC 80




FPT unionPVC threaded union, schedule 80.

CF858012CHUNION (FIPT) 1-1/4" PVC80

2014-07-08Page 1 / 1


Edition

Sch. 80 - PVC nipple



Close nippleGray PVC close nipple, schedule 80. IPS MPT x MPT.


CF203011CHCLOSE NIPPLE PVC 80 3/8"

CF207013CHCLOSE NIPPLE PVC80 3/4"

CF210015CHCLOSE NIPPLE PVC80 1"CF212016CHCLOSE NIPPLE PVC80 1-1/4"

CF215017CHCLOSE NIPPLE PVC80 1-1/2"

CF220020CHCLOSE NIPPLE PVC80 2"CF880005CHCLOSE NIPPLE 1/4" PVC 80


NippleGray PVC nipple, schedule 80. IPS MPT x MPT.

CF207120: UNTIL SUPPLIES LASTCF212060: UNTIL SUPPLIES LASTCF212080: UNTIL SUPPLIES LASTCF215040: UNTIL SUPPLIES LASTCF220021: UNTIL SUPPLIES LAST

CF205012CHNIPPLE PVC80 1/2" X 1-1/2"

CF205020CHNIPPLE PVC80 1/2" X 2"

CF205360CHNIPPLE PVC80 1/2"X 36"CF205480CHNIPPLE PVC80 1/2" X 48"


CF207040CHNIPPLE PVC80 3/4" X 4"CF207060CHNIPPLE PVC80 3/4" X 6"


CF210020CHNIPPLE PVC80 1" X 2"CF212020CHNIPPLE PVC80 1-1/4" X 2"

CF212060CHNIPPLE PVC80 1-1/4" X 6"

2015-06-29Page 1 / 2


Edition

Sch. 80 - PVC nipple


CF212080CHNIPPLE PVC80 1-1/4" X 8"CF215040CHNIPPLE PVC80 1-1/2" X 4"CF220021CHNIPPLE PVC80 2" X 2-1/2"

CF880020CHNIPPLE 1/4"X 2" PVC 80CF880060CHNIPPLE 1/4"X 6" PVC 80

2015-06-29Page 2 / 2


Edition

PVC cement



PVC clear cementMedium density, fast drying, for overground pipe up to 4"diameter.

CFA030CH705 1/2 PINT PVC CLEARCFA031CH705 CEMENT PINT PVC CLEAR

CFA032CH705 CEMENT QUART PVC CLEAR

CFA033CH705 CEMENT GALLON PVC CLEAR


PVC gray cementMedium density, medium drying.- 705 type for pipe up to 4" diameter- 711 type for pipe up to 12" diameter

CFA132CHQUART OF CEMENT #705 "GREY"

CFA232CHQUART OF CEMENT #711 "GREY"CFA233CHGALLON OF CEMENT #711 "GREY"


Empty can

CFA021CHPINT EMPTY MT CAN NO CAP

CFA022CHQUART EMPTY MT CAN NO CAP

2013-12-11Page 1 / 2


Edition

PVC cement



Dauber

CFA041CHDP-150 1-1/2 DAUBER CAPCFA042CHDQ-150 1-1/2 DAUBER CAP


Clear primerClear primer (P-70).

CFA000CHP-70 PRIMER 1/2 PINT PVC CLEAR

CFA001CHP-70 PRIMER PINT PVC CLEAR

CFA002CHP-70 PRIMER QUART PVC CLEARCFA003CHP-70 PRIMER GALLON PVC CLEAR

2013-12-11Page 2 / 2


Edition

Section:

Date effective:

M 30A

2013-12-12

Colle & nettoyeur pour PVC Cement and cleaner for PVC

Assemblage de PVC PVC assembly

MOYENNE DU NOMBRE DE JOINTS/32 ONCES DE CIMENT ET NETTOYEUR IPEX* AVERAGE NUMBER OF JOINTS/32 OUNCES OF IPEX CEMENT AND CLEANER*

Diamètre du tuyau (pouces)

Pipe diameter (inches)

1/2 3/4 1 1-1/2 2 3 4 6 8 10 12 15 18

Nombre de joints Number of joints 300 200 125 90 60 40 30 10 5 2-3 1-2 3/4 1/2

*Ces chiffres sont des estimations basées sur des tests en laboratoire. En raison des nombreuses variables dans le domaine, ces chiffres doivent être utilisés comme guide général seulement. *These figures are estimates based on laboratory test. Due to the many variables in the field, these figures should be uses as a general guide only. Les Industries Harnois Inc. 1044 Principale, St-Thomas, Québec, Canada J0K 3L0 Edition 2013-12-12

Tel.: 450-756-1041 1-888-HARNOIS fax.: 450-756-8389 www.harnois.com Page 1/1 U:\Catalogue PDF\M_30A.doc

Teflon tape



Teflon tape

CCT01CHTEFLON TAPE

2013-12-17Page 1 / 1


Edition

Polyethylene pipe



75 psi pipe

BK05PLSPLASTIC PIPE 75PSI 1/2 X...FT.BK0510RLSPLASTIC PIPE 75PSI 1/2"X 100'

BK0512CHPLASTIC PIPE 75PSI 1/2"X 122'

BK0514CHPLASTIC PIPE 75PSI 1/2"X 144'BK05300CHPLASTIC PIPE 75PSI 1/2"X3000'

BK0540RLSPLASTIC PIPE 75PSI 1/2"X 400'

BK0710RLSPLASTIC PIPE 75PSI 3/4"X 100'BK0740RLSPLASTIC PIPE 75PSI 3/4"X 400'

BK07CCHPLASTIC PIPE 75PSI 3/4"X 2500'

BK1010RLSPLASTIC PIPE 75PSI 1" X 100'BK1030RLSPLASTIC PIPE 75PSI 1" X 300'

BK1210RLSPLASTIC PIPE 75PSI 1-1/4"X100'

BK1230RLSPLASTIC PIPE 75PSI 1-1/4"X300'BK1510RLSPLASTIC PIPE 75PSI 1-1/2"X100'

BK1525RLSPLASTIC PIPE 75PSI 1-1/2"X 250

BK2010RLSPLASTIC PIPE 75PSI 2" X100'BK2020RLSPLASTIC PIPE 75PSI 2" X 200'

2014-11-19Page 1 / 1


Edition

Clamp



75 PSI "Oetiker" clampStainless steel clamp for 75 PSI polyethylene pipe.


CL198RCH1/2" 75 PSI OETIKER CLAMP

CL256RCH3/4" 75PSI OETIKER CLAMP


ClampAll stainless steel clamp.

CK286CHALL S.S.CLAMP 1/2" (14-27mm)CK288CHALL S.S. CLAMP 3/4" (18-32mm)

CK289CHALL S.S. CLAMP 1" (21-38mm)

CK290CHALL S.S. CLAMP 1-1/4"(21-44mm)CK291CHALL S.S. CLAMP 1-1/4 TO 1-1/2

CK292CHALL S.S. CLAMP 1-1/2 TO 2"CK293CHALL S.S. CLAMP 2" (40-63mm)CK295CHALL S.S. CLAMP 2-1/2"(52-76mm)

CK296CHALL S.S. CLAMP 3" (72-95mm)

CK297CHALL S.S. CLAMP 4" (91-114mm)CK298CHALL S.S. CLAMP 6" (143-165mm)

CK298ACHALL S.S. CLAMP 6" TO 10"CK299CHSS.CLAMP #HAS188

2015-06-29Page 1 / 1


Edition

Polyethylene adapter



Galvanized adapterGalvanized steel male adapter (MPT x insert) for polyethylene pipe.

CK051CHGALV. MALE ADAPTOR 1/2"CK052CHGALV. MALE ADAPTOR 3/4"

CK053CHGALV. MALE ADAPTOR 1"

CK055CHGALV. MALE ADAPTOR 1-1/2"


Nylon adapterNylon male adapter (MPT x insert) for polyethylene pipe.

CK043CHNYLON MALE ADAPTOR 1"


Poly adapterPlastic male adapter (MPT x insert) for polyethylene pipe.

CK031CHPVC MALE ADAPTOR 1/2"

CK032CHPVC MALE ADAPTOR 3/4"

CK033CHPVC MALE ADAPTOR 1"CK034CHPOLY MALE ADAPTOR 1-1/4"

CK035CHPOLY MALE ADAPTOR 1-1/2"

CK036CHPOLY MALE ADAPTOR 2"

2015-06-19Page 1 / 2


Edition

Polyethylene adapter



Reduced adapterPlastic reduced male adapter (MPT x insert) for polyethylene pipe.

CK809CHMALE ADAPT.1/2"MPTx 1" INSERTCK810CHMALE ADAPT.1/2"MPTx3/4" INSERT

CK811CHMALE ADAPT.3/4"MPTx1" INSERT

CK818CHMALE ADAPT 3/4"MPTx1/2" INSERTCK820CHMALE ADAPT 1"MPTx3/4" INSERT

CK824CHADAPTATER 1-1/4"MPTx1"INSERT


Enlarged adapterPVC enlarged male adapter for polyethylene pipe.

CK812CHREDUC.MALE ADAPT.1"MPTX1-1/4"


Female adapterPVC female adapter for polyethylene pipe.

CK064CHFEMALE ADAPTER 1-1/2"

2015-06-19Page 2 / 2


Edition

Polyethylene coupling



Galvanized couplingGalvanized steel coupling (insert x insert) for polyethylene pipe.

CK022CHGALV. COUPLING 3/4"CK023CHGALV. COUPLING 1"


Plastic couplingPlastic coupling (insert x insert) for polyethylene pipe.

CK001CHPVC COUPLING 1/2"

CK002CHPVC COUPLING 3/4"

CK003CHPVC COUPLING 1"CK004CHPVC COUPLING 1-1/4"CK005CHPVC COUPLING 1-1/2"


Reduced couplingPlastic reduced coupling (insert x insert) for polyethylene pipe.

CK300CHPOLY REDUCING COUPLG 3/4 X 1/2CK301CHPOLY REDUCING COUPLING 1 X 3/4

CK302CHPOLY REDUCING COUPLING 1 X 1/2

CK303CHPOLY REDUC. COUPLING 1-1/4 X 1CK306CHPOLY REDUC COUPLG 1-1/2x 1-1/4

CK307CHPOLY REDUC COUPLING 1-1/2 X 1CK310CHPOLY REDUC COUPLING 2 X 1-1/2

CK311CHPOLY REDUC. COUPLING 2 X 1-1/4

2015-06-19Page 1 / 2


Edition

Polyethylene coupling


CK312CHPOLY REDUC. COUPLING 2 X 1"

2015-06-19Page 2 / 2


Edition

Elbow for polyethylene



Insert x FPTPlastic elbow (insert x FPT) for polyethylene pipe.

CK740CHPVC COMBIN.RED.ELB 1/2x1/2 FPTCK741CHPVC COMBIN.RED.ELB 3/4x1/2 FPT

CK742CHPVC COMBIN.RED.ELB 3/4x3/4 FPT

CK744CHPVC COMBIN.RED.ELB 1 X 3/4 FPTCK745CHPVC COMBIN.RED.ELBOW 1 X 1 FPT

CK753CHPVC COMBIN.RED.ELB.1-1/2X1-1/4


Insert x insertPlastic elbow (insert x insert) for polyethylene pipe.

CK151CHPOLY 90* ELBOW 1/2"CK152CHPOLY 90* ELBOW 3/4"

CK153CHPOLY 90* ELBOW 1"

CK154CHPOLY 90* ELBOW 1-1/4"CK155CHPOLY 90* ELBOW 1-1/2"

CK156CHPOLY 90* ELBOW 2"


PVC elbow

CK151PVCCHPVC 90* ELBOW 1/2"CK152PVCCHPVC 90* ELBOW 3/4"

CK153PVCCHPVC 90* ELBOW 1"

2015-08-04Page 1 / 2


Edition

Elbow for polyethylene



Reduced insert x insertPlastic reduced elbow (insert x insert) for polyethylene pipe.

CK660CHPVC REDUCING ELBOW 3/4 X 1/2CK661CHPVC REDUCING ELBOW 1 X 3/4


Insert x MPTPlastic elbow (insert x MPT) for polyethylene pipe.

CK700CHPVC COMBIN.ELBOW 1/2 X 1/2 MPT

CK701CHPVC COMBIN.ELBOW 3/4 X 3/4 MPT

CK702CHPVC COMBIN.ELBOW 1" X 1"MPT

2015-08-04Page 2 / 2


Edition

Tee for polyethylene



TeeStandard tee (insert x insert x insert) for polyethylene pipe.

CK091CHPOLY TEE 1/2"CK092CHPOLY TEE 3/4"

CK093CHPOLY TEE 1"

CK094CHPOLY TEE 1-1/4"CK095CHPOLY TEE 1-1/2"

CK096CHPOLY TEE 2"

CK097CHPLASTIC TEE 2-1/2"CK098CHINSERT TEE PVC 3"


PVC tee

CK092PVCCH3/4"PVC TEE

CK093PVCCH1"PVC TEE


End teeEnd line tee (insert x insert x insert) for polyethylene pipe.

CK759CHBULL HEAD TEE 3/4 X 3/4 X 1"

2014-03-25Page 1 / 4


Edition




Line tee / FPT outletLine tee with threaded outlet (insert x FPT x insert) for polyethylene pipe.

CK580CHPVC COMBIN. TEE 1/2 X 1/2 FPTCK581CHPVC COMBIN. TEE 3/4 X 1/2 FPT

CK582CHPVC COMBIN. TEE 3/4 X 3/4 FPT

CK583CHPVC COMBIN. TEE 1 X 1/2 FPTCK584CHPVC COMBIN. TEE 1 X 3/4 FPT

CK585CHPVC COMBIN. TEE 1 X 1 FPT

CK586CHPVC COMBIN.TEE 1-1/4"X1/2"FPTCK587CHPVC COMBIN. TEE 1-1/4x3/4 FPT

CK588CHPVC COMBIN. TEE 1-1/4 X 1 FPT

CK589CHPVC COMBIN.TEE 1-1/4x1-1/4 FPTCK590CHPVC COMBIN.TEE 1-1/2 X 1/2 FPT

CK591CHPVC COMBIN.TEE 1-1/2 X 3/4 FPT

CK592CHPVC COMBIN. TEE 1-1/2 X 1 FPTCK593CHPVC COMBIN.TEE 1-1/2x1-1/4 FPT

CK594CHPVC COMBIN.TEE 1-1/2x1-1/2 FPT

CK595CHPVC COMBIN. TEE 2 X 1/2 FPTCK597CHPVC COMBIN. TEE 2 X 1 FPT

CK599CHPVC COMBIN.TEE 2"X 1-1/2" FPT

CK600CHPVC COMBIN. TEE 2 X 2 FPT


Line tee / MPT outletLine tee with threaded outlet (insert x MPT x insert) for polyethylene pipe.

CK572CHTEE INSERT 1" X 1"MPT

2014-03-25Page 2 / 4


Edition




Reduced line tee / FPTReduced line tee with threaded outlet (insert x FPT x insert) for polyethylene pipe.

CK604CHREDUC.TEE 3/4"X 1/2"X1/2"FPTCK605CHREDUC.TEE 1"X3/4"X1/2"FPT


Reduced line teeReduced line tee (insert x insert x insert) for polyethylene pipe.

CK770CHPOLY REDUC TEE 3/4 X 1/2 X 1/2

CK772CHPOLY REDUC TEE 1 X 3/4 X 3/4

CK780CHREDUCING TEE 1-1/4"X1"X3/4"CK781CHREDUCING TEE 1-1/4"X1" X 1"CK785CHREDUCING TEE 1-1/2"X1-1/4"X1"CK786CHPVC TEE 1-1/2"X1-1/4"X1-1/4"


Reduced teeStandard reduced tee (insert x insert x insert) for polyethylene pipe.

CK540CHPOLY REDUCING TEE 3/4 X 1/2

CK541CHPOLY REDUCING TEE 1 X 3/4

CK542CHPOLY REDUCING TEE 1 X 1/2CK543CHPVC REDUCING TEE 1-1/4 X 1

CK544CHPVC REDUCING TEE 1-1/4 X 3/4CK545CHPVC REDUCING TEE 1-1/4 X 1/2

CK546CHPVC REDUCING TEE 1-1/2 X 1-1/4

2014-03-25Page 3 / 4


Edition



CK547CHPOLY REDUCING TEE 1-1/2 X 1CK549CHPOLY REDUCING TEE 1-1/2 X 1/2CK550CHPVC REDUCING TEE 2 X 1-1/2

CK551CHPVC REDUCING TEE 2 X 1-1/4CK552CHPOLY REDUCING TEE 2 X 1

CK553CHPVC REDUCING TEE 2 X 3/4

CK554CHPVC REDUCING TEE 2 X 1/2

2014-03-25Page 4 / 4


Edition

Plug for polyethylene



PlugPlastic plug (insert) for polyethylene pipe.

CK201CHPVC INSERT PLUG 1/2"CK202CHPVC INSERT PLUG 3/4"

CK203CHPVC INSERT PLUG 1"

CK205CHPOLY INSERT PLUG 1-1/2"CK206CHPOLY INSERT PLUG 2"

2014-03-26Page 1 / 1


Edition

Galvanized coupling



CouplingCC001: UNTIL SUPPLIES LAST

CC001CHGALV. COUPLING 1/8"CC002CHGALV. COUPLING 1/4"

CC005CHGALV. COUPLING 3/4"

CC006CHGALV. COUPLING 1"CC008CHGALV. COUPLING 1-1/2"


Reduced couplingCC215: UNTIL SUPPLIES LAST

CC206CHG.RED.COUPLING 3/4X1/2 NO LEADCC210CHG.RED.COUPLING 1 X 3/4 NO LEADCC215CHG.RED.COUPLING 1-1/4X1 NO LEAD

CC221CHG.RED.CPLER 1-1/2X1-1/4 NOLEAD

CC222CHG.RED.COUPLING 1-1/2X1 NO LEADCC228CHG.RED.CPLER 2 X 1-1/2 NO LEAD

2015-06-29Page 1 / 1


Edition

Galvanized elbow



45 female elbow

CC081CHGV.ELBOW F.F.45*-1/4"NO LEAD


45 male/female elbow>>> UNTIL SUPPLIES LAST

CC048CHGV.ELBOW M.F.45*1-1/2"NO LEAD


90 female elbowCC060: UNTIL SUPPLIES LAST

CC060CHGV.ELBOW F.F.90*1/8"NO LEAD

CC063CHGV.ELBOW F.F.90*1/2"NO LEAD

CC064CHGV.ELBOW F.F.90*3/4"NO LEADCC065CHGV.ELBOW F.F.90*-1"NO LEAD

CC066CHGV.ELBOW FF.90*1-1/4"NO LEAD

CC067CHGV.ELBOW FF.90*1-1/2"NO LEADCC068CHGV.ELBOW F.F.90*-2"NO LEAD

2015-06-29Page 1 / 2


Edition

Galvanized elbow



90 male/female elbowCC030: UNTIL SUPPLIES LAST

CC021CHGALV.ELBOW M.F.90*-1/4"NO LEADCC023CHGALV.ELBOW M.F.90*-1/2"NO LEAD

CC024CHGALV.ELBOW M.F.90*-3/4"NO LEAD

CC025CHGALV.ELBOW M.F.90*-1"NO LEADCC026CHGALV.ELB. M.F.90*1-1/4"NO LEAD

CC028CHGALV.ELBOW M.F.90* 2"NO LEAD

CC029CHGALV.ELBOW MF.90*2-1/2"NO LEADCC030CHGALV.ELBOW MF. 90* 3"NO LEAD

2015-06-29Page 2 / 2


Edition

Galvanized cross & tee



CrossCC161: UNTIL SUPPLIES LAST

CC161CHGALV. CROSS 1/4" NO LEADCC164CHGALV. CROSS 3/4" NO LEAD

CC165CHGALV. CROSS 1" NO LEAD

CC166CHGALV. CROSS 1-1/4" NO LEADCC167CHGALV. CROSS 1-1/2" NO LEAD

CC168CHGALV. CROSS 2" NO LEAD


Tee

CC103CHGALV. TEE 1/2"NO LEADCC104CHGALV. TEE 3/4" NO LEAD

CC105CHGALV. TEE 1" NO LEAD

CC106CHGALV. TEE 1-1/4"NO LEADCC107CHGALV. TEE 1-1/2" NO LEAD

CC108CHGALV. TEE 2" NO LEAD

2015-06-29Page 1 / 1


Edition

Galvanized bushing



BushingCC415: UNTIL SUPPLIES LASTCC421: UNTIL SUPPLIES LASTCC429: UNTIL SUPPLIES LASTCC439: UNTIL SUPPLIES LAST

CC411CHGALV.BUSHING 3/8X1/4 NO LEAD

CC414CHGALV.BUSHING 1/2X1/4 NO LEADCC415CHGALV.BUSHING 1/2X1/8 NO LEAD

CC416CHGALV.BUSHING 3/4X1/2 NO LEAD

CC417CHGALV.BUSHING 3/4X3/8 NO LEADCC418CHGALV.BUSHING 3/4X1/4 NO LEADCC420CHGALV.BUSHING 1 X 3/4 NO LEAD

CC421CHGALV.BUSHING 1 X 1/2 NO LEADCC422CHGALV.BUSHING 1 X 3/8 NO LEAD

CC423CHGALV.BUSHING 1 X 1/4 NO LEAD

CC425CHGALV.BUSHING 1-1/4 X 1 NO LEADCC426CHGALV.BUSHING 1-1/4X3/4 NO LEADCC428CHGALV.BUSHING1-1/4X3/8G.NO LEAD

CC429CHGV.BUSHING 1-1/4X1/4 NO LEADCC431CHG.BUSHING 1-1/2X1-1/4 NO LEAD

CC435CHGV.BUSHING 1-1/2X3/8 NO LEADCC438CHGV.BUSHING 2 X 1-1/2 NO LEAD

CC439CHGV.BUSHING 2X1-1/4 NO LEADCC440CHGV.BUSHING 2 X 1 NO LEDAD

2015-06-29Page 1 / 1


Edition

Galvanized cap & plug



Female cap

CC121CHGALV. CAP 1/4" NO LEADCC124CHGALV. CAP 3/4" NO LEAD

CC125CHGALV. CAP 1" NO LEAD

CC126CHGALV. CAP 1-1/4" NO LEADCC127CHGALV. CAP 1-1/2" NO LEAD

CC128CHGALV. CAP 2" NO LEAD


Male plugCC140: UNTIL SUPPLIES LAST

CC140CHGALV. PLUG 1/8" NO LEADCC141CHGALV. PLUG 1/4" NO LEAD

CC143CHGALV. PLUG 1/2" NO LEAD

CC144CHGALV. PLUG 3/4" NO LEADCC145CHGALV. PLUG 1" NO LEAD

CC146CHGALV. PLUG 1-1/4" NO LEADCC147CHGALV. PLUG 1-1/2" NO LEADCC148CHGALV. PLUG 2" NO LEAD

2015-06-29Page 1 / 1


Edition

Galvanized flange



Gasket

CD13070CHGASKET FLANGE 3/4"


Union

CC184CHGALV. UNION 3/4" NO LEADCC185CHGALV. UNION 1" NO LEAD

CC186CHGALV. UNION 1-1/4" NO LEAD

CC187CHGALV. UNION 1-1/2" NO LEADCC188CHGALV. UNION 2" NO LEAD

2015-06-29Page 1 / 1


Edition

Galvanized nipple



Close nippleCC700: UNTIL SUPPLIES LAST

CC700CHGALV. CLOSE NIPPLE 1/8"CC701CHGALV. CLOSE NIPPLE 1/4"

CC702CHGALV. CLOSE NIPPLE 3/8"

CC703CHGALV. CLOSE NIPPLE 1/2"CC704CHGALV. CLOSE NIPPLE 3/4"

CC705CHGALV. CLOSE NIPPLE 1"

CC706CHGALV. CLOSE NIPPLE 1-1/4"CC707CHGALV. CLOSE NIPPLE 1-1/2"

CC708CHGALV. CLOSE NIPPLE 2"

CC709CHGALV. CLOSE NIPPLE 2-1/2"


2" nipple

CC723CHGALV. NIPPLE 1/2" X 2"

CC724CHGALV. NIPPLE 3/4" X 2"CC725CHGALV. NIPPLE 1"X 2"CC726CHGALV. NIPPLE 1-1/4"X 2"

CC728CHGALV. NIPPLE 2" X 2-1/2"


3" nippleCC742: UNTIL SUPPLIES LAST

2015-06-29Page 1 / 3


Edition

Galvanized nipple


CC742CHGALV. NIPPLE 3/8" X 3"CC743CHGALV. NIPPLE 1/2" X 3"CC744CHGALV. NIPPLE 3/4" X 3"

CC745CHGALV. NIPPLE 1" X 3"CC748CHGALV. NIPPLE 2" X 3"



CC764CHGALV. NIPPLE 3/4" X 4"

CC765CHGALV. NIPPLE 1" X 4"CC766CHGALV. NIPPLE 1-1/4" X 4"

CC768CHGALV. NIPPLE 2" X 4"



CC804CHGALV. NIPPLE 3/4" X 6"CC805CHGALV. NIPPLE 1" X 6"

CC807CHGALV. NIPPLE 1-1/2" X 6"



CC845CHGALV. NIPPLE 1" X 8"CC846CHGALV. NIPPLE 1-1/4" X 8"

2015-06-29Page 2 / 3


Edition

Galvanized nipple



12" nipple

CC905CHGALV. NIPPLE 1" X 12"

2015-06-29Page 3 / 3


Edition

"Kamlock" fitting



Male x FPTCouplings FPT x "Kamlock" male.

CYA075ACHPART A ALUM. 3/4" M.K X F.P.TCYA150ACHPART A ALUM.1-1/2"M.K X F.P.T

CYA200ACHPART A ALUM.2" M.K X F.P.T

CYA200BCHPART A BRASS 2" M.K. X F.P.TCYA300ACHPART A ALUM. 3" M.K X F.P.T.


Male x MPTCouplings MPT x "Kamlock" male.

CYF075ACHPART F ALUM. 3/4" M.K.X M.P.TCYF100ACHPART F ALUM. 1" M.K. X M.P.TCYF150ACHPART F ALUM.1-1/2" M.K.X M.P.T

CYF200ACHPART F ALUM 2" M.K. X M.P.T.

CYF250ACHPART F ALUM. 2-1/2" M.K.X M.PTCYF300ACHPART F ALUM 3" M.K. X M.P.T


Male x hoseAluminum couplings hose insert x "Kamlock" male.

CYE075ACHKAMLOCK ALUM 3/4"M.K.X HOSE

CYE100ACHPART E ALUM. 1" M.K. X HOSECYE125ACHPART E ALUM.1-1/4''M.K.X BOYAU

CYE150ACHPART E ALUM. 1-1/2" M.K.X HOSE

2015-06-18Page 1 / 3


Edition

"Kamlock" fitting


CYE200ACHPART E ALUM. 2" M.K.X HOSECYE250ACHPART E ALUM.2-1/2" M.K. X HOSECYE300ACHPART E ALUM. 3" M.K. X HOSE


Male plugAluminum "Kamlock" male plug.

CYG075ACHDUST PLUG 3/4" M.K.CYG100ACHDUST PLUG 1"M.K.

CYG150ACHDUST PLUG 1-1/2" M.K.

CYG200ACHDUST PLUG 2" M.K.CYG250ACHDUST PLUG 2-1/2" M.K.

CYG300ACHDUST PLUG 3" M.K.


Female x FPTCouplings FPT x "Kamlock" female.

CYD100ACHPART D ALUM.1" F.K. X F.P.TCYD200ACHPART D ALUM 2" F.K. X F.P.T

CYD250ACHPART D ALUM 2-1/2"F.K.X F.P.T


Female x MPTCouplings MPT x "Kamlock" female.

CYB075ACHPART B ALUM. 3/4" F.K. X M.P.TCYB100ACHPART B ALUM. 1" F.K.X M.P.T

CYB200ACHPART B ALUM.2" F.K. X M.P.T

2015-06-18Page 2 / 3


Edition

"Kamlock" fitting



Female x hoseCouplings hose insert x "Kamlock" female.

CYC075ACHKAMLOCK ALUM 3/4"F.K. X HOSECYC100ACHPART C ALUM. 1"F.K. X HOSE

CYC125ACHPART C ALUM. 1-1/4"F.K. X HOSE

CYC150ACHPART C ALUM. 1-1/2" F.K.XHOSECYC200ACHPART C ALUM 2" F.K. X HOSE


Female capAluminum "Kamlock" female cap.

CYH075ACHDUST CAP 3/4" F.K.CYH150ACHDUST CAP 1-1/2" F.K.CYH200ACHDUST CAP 2" F.K.

CYH250ACHDUST CAP 2-1/2" F.K.

CYH300ACHDUST CAP 3"FEM.K.


GasketGasket for "Kamlock" couplings.

CYJ100CHGASKET FOR KAMLOCK 1"CYJ200CHGASKET FOR KAMLOCK 2"

CYJ250CHGASKET FOR KAMLOCK 2-1/2"CYJ300CHGASKET FOR KAMLOCK 3"

CYJ400CHGASKET FOR KAMLOCK 4"

2015-06-18Page 3 / 3


Edition

Garden hose



MPT x MHT coupling

SB50041CH3/4" MHT X 3/4" MPT & 1/2"FPT


Swivel coupling

SB50043CH3/4" FHT X 3/4" FPT HOSE-PIPESB50044CH3/4" FHT X 1/2" FPT HOSE-PIPE


Quick coupling

SB58285CHQUICK CONNECT 3/4"FEM.X MALE


Double valveDouble outlet zinc shut-off valve 3/4"FHT x 3/4"MHT x 3/4"MHT.

SB58084CHZINC HOSE Y W/SHUT-OFF VALVE

2014-03-26Page 1 / 2


Edition

Garden hose



Single valve

SB58087CHZINC SHUT-OFF COUPLING 3/4"HT

2014-03-26Page 2 / 2


Edition

Pressure hose



Reinforced vinyl hoseClear vinyl hose.(T° 20°C - 70°C)(T° 68°F - 158°F)


BYQ05PLSHOSE BRAIDED VINYL 1/2" 200PSIBYQ07PLSHOSE BRAIDED VINYL 3/4" 150PSI

BYQ10PLSHOSE BRAIDED VINYL 1" 125PSI


Clear vinyl hoseClear vinyl hose.(T° 20°C - 70°C)(T° 68°F - 158°F)


BYL02-1PLSHOSE CLEAR VINYL 1/4" 55PSIBYL03-1PLSHOSE CLEAR VINYL 5/16" 50PSI

BYL04-1PLSHOSE CLEAR VINYL 3/8" 45PSI

BYL05-1PLSHOSE CLEAR VINYL 1/2" 45PSIBYL06-1PLSHOSE CLEAR VINYL 3/4" 35PSI

BYL07-1PLSHOSE CLEAR VINYL 1" 25PSI

2015-07-30Page 1 / 1


Edition

Traveller hose



"Oroflex" hose

MT430PLSDUROLEX 10 - 3" 150psi

2013-11-20Page 1 / 1


Edition

NSprinklers

Page Page title

76 Drain valve

60 Orbit sprinkler

5 Plasson

63 Residential Orbit pop-up

75 Valves boxes

7 Zamac coupling

2018-05-14 Page 1 / 1

Plasson

Effective date: 2018-04-27Section: N 5


Plasson quick valve

SL1CHQUICK COUPLING VALVE 3/4"

SL2CHRISER FOR QCV 3/4"

SL5CHVALVE BODY (LOWER) - 3/4"

2018-05-02

Page 1 / 1



Edition

Zamac coupling



Coupling

Zamac coupling.

SM15CHSLEEVE COUPLING 1/2" ZAMAC

SM16CHSLEEVE COUPLING 3/4" ZAMAC

2018-05-02

Page 1 / 1



Edition

Orbit sprinkler



Impact sprinkler

Impact head sprinkler, with distance deflector and two nozzles included.

SB55010CH1/2" MPT PLASTIC IMPACT

2018-05-02

Page 1 / 1



Edition

Section: N 60A


Orbit sprinkler

Performance

#SB55010 & #SB55026 SPRINKLERS

Nozzles Pressure PSI

Flow gpm

Radius ft

Precipitation " / hre

#2 ( 9/64" )

25 3.0 33 0.26 30 3.3 37 0.23 35 3.5 39 0.22 40 3.7 42 0.20 45 3.8 43 0.18 50 4.0 44 0.19 55 4.4 46 0.20

#3 ( 5/32" )

25 3.5 31 0.24 30 3.8 34 0.22 35 4.0 37 0.20 40 4.2 38 0.18 45 4.4 39 0.17 50 4.5 40 0.18 55 4.8 41 0.18



Residential Orbit pop-up



Pop-up heads

Spring-loaded 4" pop-up. Durable plastic construction, 1/2" FPT , flow adjustment screw, stainless steel retraction spring, inlet filter basket prevents debris from clogging nozzle, wiper seal keeps out sand.


K5541531CH4"SPRAY HEAD & NOZ.360*

2018-05-02

Page 1 / 1



Edition

Section: N 63A




Valves boxes



10" round valve box

10" round valve box with cover.

SCD041CH10" CIRCULAR VALVE BOX

2018-05-02

Page 1 / 1



Edition

Section: N 75A


Valve box

Dimensions



Drain valve



Drain valve

Automatic brass drain valve 1/2"MPT.

SB51039CH1/2" AUTOMATIC DRAIN BRASS

2018-05-02

Page 1 / 1



Edition

OValves

Page Page title

2 Ball valve & union

10 Brass ball valve

12 Brass gate valve

30 Electric valve

5 Float valve

20 Mist/Propagation

1 PVC ball valve

18 Reducing valve

40 Valve parts

2018-05-14 Page 1 / 1

PVC ball valve

Effective date: 2018-04-27Section: O 1


E serie FPT x FPT

Economic PVC ball valve.

SB41105CH1/2"FPT COMPACT PVC BALL VALVE

SB41107CH3/4"FPT COMPACT PVC BALL VALVE

SB41110CH1"FPT COMPACT PVC BALL VALVE

SB41112CH1-1/4"FPT COMPACT PVC BALL VLV

SB41115CHUTILITY COMP.B.VALV.PVC 1-1/2"

SB41120CH2"FPT COMPACT PVC BALL VALVE

SB41125CH2-1/2"FPT COMPACT PVC BALL VLV


E serie slip x slip

Economic PVC ball valve.

SB412005CHUTILITY COMP.B.VLV PVC 1/2"SL

SB412007CHUTILITY COMP.B.VLV PVC 3/4"SL

SB412010CHUTILITY COMP.B.VALVE PVC 1"SL

SB412010GCHUTILITY COMP.B.VALVE PVC 1"SL

SB412012CHUTILITY COMP.B.VALV.PVC 1-1/4S


SB412020CHUTILITY COMP.B.VALVE PVC 2"SL


SB412030CH3"SLIP PVC BALL VALVE

SB412040CH4"SLIP PVC BALL VALVE

2018-05-01

Page 1 / 1



Edition

Ball valve & union



Ball valve & union

Ball valve and union.235 psi.

CF3639007CH3/4"TRUE UNION STD BALL VALVE

CF3639010CH1"TRUE UNION STD BALL VALVE

CF3639015CH1-1/2"TRUE UNION STD BALL VLV

CF3639020CH2"TRUE UNION STD BALL VALVE

2018-05-01

Page 1 / 1



Edition

Float valve



Float valve

1" MPT brass float valve.

XDE1100CHBRASS FLOAT VALVE 1" ASSY.

2018-05-01

Page 1 / 1



Edition

Brass ball valve



Standard serie

Brass ball valve, closure in a quarter turn. FPT x FPT.

DC4025CHBALL VALVE 1/4" BRASS



DC4100CHBALL VALVE 1" BRASS

DC4125CHBALL VALVE 1-1/4" BRASS

DC4150CHBALL VALVE 1-1/2" BRASS


DC4250CHBALL VALVE 2-1/2"BRASS


2018-05-01

Page 1 / 1



Edition

Brass gate valve



Standard serie

Brass gate valve, FPT x FPT.

DC1050CHGATE VALVE 1/2" BRASS

DC1075CHGATE VALVE 3/4" BRASS

DC1100CHGATE VALVE 1" BRASS

DC1150CHGATE VALVE 1-1/2" BRASS



2018-05-01

Page 1 / 1



Edition

Reducing valve



100 series

- Temperature range: water up to 185°F- Pressure rating: 145 PSI- Operating pressure range: 7-145 PSI

KK120552CHPRESSURE REDUCING VALVE 2"FPT

KK120553CHPRESSURE REDUCING VALVE 3"FPT


300 series- Temperature range: water up to 140°F- Pressure rating: 145 PSI- Operating pressure range: 10-145 PSI

KK320552CHPRESSURE REDUCING VALVE 2"

2018-05-02

Page 1 / 1



Edition

Mist/Propagation



3/4" PVC valve low flow

Flow: .1 to 28 gpmOperating pressure: 10-150 PSI3/4" with solenoid and flow control

K4DV01CH3/4"PVC VALVE-24V. LOW FLOW

K4DV02CHPVC VALVE 3/4"115V. LOW FLOW


1" PVC valve low flowFlow: .2 to 35 gpmOperating pressure: 10-150 PSI1" with solenoid and flow control

K4DV11CH1"PVC VALVE-24V. LOW FLOW

K4DV12CH1" PVC VALVE 115V LOW FLOW

2018-05-29

Page 1 / 1



Edition

Electric valve



Flow control

With flow control; manual operation. Pressure from 5 to 150 PSI; flow from 30 to 150 GPM. Construction in nylon and fiberglass.

K557027CH2"ELECTRONIC VALVE RAINB.24V

K557211CH1"NPT VALVE WITH FLOW CONTROL

K557212CH1"NPT VALVE 115V.FLOW CONTROL


Standard

1" F.P.T. PVC valve. Without flow control; manual operation with internal purge. Pressure from 15 to 150 PSI; flow from 5 to 40 GPM. PVC body.

K557200ACH1"ELEC.IN-LINE THREAD W-O CTLR


Diaphragm

K557200-ACHDIAPHRAGM FOR VALVE 1"

2018-05-14

Page 1 / 1



Edition

Section: O 30A


Orbit electric valve

Pressure loss



Valve parts



Actuator

K557026GCHCOIL 24VOLTS FOR VLV RAINB.2"

KA100246CHSOLENOID ASS.24 VOLTS ORBIT

KA100248CHSOLENOID ASSEMBLY 115 VOLTS

KA100249CH24VAC SOLENOID

2018-05-01

Page 1 / 1



Edition

PTimers & controllers

Page Page title

60 Electric wire

30 Galcon controller

20 Orbit controller

9 Rain sensor

32 Transformer

2018-05-14 Page 1 / 1

Rain sensor

Effective date: 2018-04-27Section: P 9


Rain Bird sensor

The Rain Bird rain sensor saves water by automatically measuring precipitation amounts and suspends irrigation cycles when watering is unnecessary. Suitable for use with controllers that can actuate up to ten 24 VAC, 7 VA solenoid valves per station, plus one master valve.Device suitable for 24 VAC.

K701-1CHRAIN BIRD RAIN SENSOR

2018-05-01

Page 1 / 1



Edition

Orbit controller



Timer valve

- Use three 1-1/2 volts batteries- 3 start times per day (from 1 to 99 min.), manual or automatic starting- Water off switch from 1 to 24 hours. Watering days of the week or every 2nd or 3rd days- For outside installation on faucet (3/4"FHT x 3/4"MHT)- You can remove timer from valve to program or store


K562001CHHOSE BIB TIMER 2 VALVES

2018-05-02

Page 1 / 1



Edition

Galcon controller



Controller

- Operate up to 6 valves and master valve (starter pump)- Can operate 2 valves at the same time- Operates valves of 24 VAC- 4 start times per day, per valve in calendar mode- Simple programming with 4 buttons- Manual operation optional- Automatic short circuit valve detection, isolates the shorted valve and displays a visible alarm- Can be programmed with emergency power, without connection AC- Up to 30 days of delay in case of rainSPECIFICATIONS OPERATION- Program: independent program for each valve- Watering duration of stations: segments of 1 second up to 24 hours- Watering schedule: - Segments of 1 minute up to 5 minutes - Segments of 5 minutes up to 15 minutes - Segments of 15 minutes up to 45 minutes - Segments of 1 hour up to 23 hours - Segments of 1 day up to 30 days - 7 day calendar- Beginning operation in irrigation mode: Up to 4 starts per day- Beginning operation in propagation mode: 1 start each minute- Sensor: Start and stop- Irrigation window which allows propagation to a defined period of the day- Window open: AM or PM- Window close: AM or PMELECTRICAL SPECIFICATIONS- Input: 120 VAC, 60 Hz- Output: 24 VAC, 0.27 amps per station- Maximum output: 24 VAC, 0.83 amps- Emergency power: 9 V alkaline batteries (not included)DIMENSIONS- Height: 6-1/4" (16 cm)- Width: 4" (10 cm)- Depth: 1-1/2" (3.8 cm)

K4DC01-1CH6 STATIONS CONTROLLER 8056S AC

K4DC01-ACHAC TRANSFORMER FOR 5006-IP

2018-05-01

Page 1 / 1



Edition

Transformer



Transformer

Replacement power supply for irrigation controller.CAN OPERATE 1 VALVE AT A TIME.

K557052CHTRANSFORMATER 24V-110V.PLUG IN

2018-05-01

Page 1 / 1



Edition

Electric wire



18 gauge electric wire

Maximum length in one piece:8ZX18-2S: 100m / 328'8ZX18-4 : 75m / 246'8ZX18-6 : 75m / 246'8ZX18-8 : 75m / 246'

8ZX18-2SPLSWIRE 18-2 CONDUCT.SHIELD GREY

8ZX18-4PLSWIRE 18-4 FOR CONTROLLER LOW V




King connector

KF004CHBLACK/WHITE WIRE CONNECTOR

2018-05-01

Page 1 / 1



Edition

Section: P 60A


Electric wire

Electrical 24 VCA valves: 0.48 amp

Maximum distance vs gage of wire

WIRE GAGE 1 VALVE 2 VALVES

#22 380 feet 190 feet

#20 610 feet 305 feet

#18 980 feet 490 feet

#16 1,550 feet 775 feet

#14 2,470 feet 1,235 feet Maximum resistance allowed for one valve and its wire should be 12.5 OHMS. For 2 valves 6.5 OHMS. Les Industries Harnois Inc. 1044 Principale, St-Thomas, QC, Canada, J0K 3L0 Edition 2018-05-01


RFiltration & fertilization

Page Page title

1 Amiad filter

10 Disk filter

40 MixRite injector

2018-06-12 Page 1 / 1

Section: R 00A


Filtration

FILTERS CLASSIFICATION VS. SCS

CATEGORY MILLIMETERS INCHES MESH (1)

SAND FILTRATION (2)

Very rough sand 1.00 -2.00 0.0393 -0.0786 18-10

Rough sand 0.50 -1.00 0.0197 -0.0393 35-18 approximate

Medium sand 0.25 -0.50 0.0098 -0.0197 60-35 1/10

Fine sand 0.10 -0.25 0.0039 -0.0098 160-35 of diameter

Very fine sand 0.05 -0.10 0.0029 -0.0039 270-160 of sand

Silt 0.002 -0.05 0.00008 -0.0020 400+/-270

Clay - than 0.002 - than 0.00008

(1) Standard mesh (2) For round sand (From Wilson 1977)

MESH Inches MICRONS MESH Inches MICRONS MESH Inches MICRONS3250 0.0002 6 130 0.0043 110 24 0.028 718 1600 0.0005 14 120 0.0046 118 20 0.034 872

750 0.0010 25 110 0.0051 131 18 0.039 1000 325 0.0016 40 100 0.0055 149 16 0.045 1154 250 0.0024 62 90 0.0061 156 14 0.051 1308 200 0.0029 74 80 0.0070 179 12 0.060 1538 180 0.0033 85 70 0.0078 200 10 0.075 1923 170 0.0035 90 60 0.0092 238 8 0.097 2488 160 0.0038 97 50 0.0117 300 6 0.132 3385 150 0.0041 100 40 0.015 385 5 0.159 4077 140 0.0042 108 30 0.020 513 4 0.203 5205



Amiad filter

Effective date: 2018-05-25Section: R 1


3/4" Amiad filter

3/4"MPT x 3/4"MPT filterMax. 140 PSI Ratio 1:11Cylinder: 1.2" x 5"Weight: 9ozType: 101-0052Pressure loss: 2.5 PSI to 12 gpm

KM390-08CHCOMPLETE FILTER 3/4"-200 MESH





1" Amiad filter

1"MPT x 1"MPT filterMax. 140 PSI Ratio 1:13Cylinder: 2" x 5"Weight: 1.4 lbType: 112-0052Pressure loss: 4.0 PSI to 30 gpm

KM3901-08CHCOMPLETE FILTER 1"-200 MESH




2018-05-31

Page 1 / 4



Edition

Amiad filter



1-1/2" Amiad filter

1-1/2"MPT x 1-1/2"MPT filterMax. 140 PSI Ratio 1:9Cylinder: 2.06" x 10"Weight: 3.75 lbType: 116-0052Pressure loss: 2.0 PSI to 60 gpm

KM39110-08CHCOMPLETE FILTER 1-1/2``200 MES

KM39110-10CHCOMPLETE FILTER 1-1/2"155 MESH

KM39110-13CHCOMPLETE FILTER 1-1/2"120 MESH

KM39110-3CHCOMPLETE FILTER 1-1/2"-50 MESH


2" Amiad filter

2"MPT filterMax. 140 PSI, 110 GPM2 PSI pressure lossType 123-0059 superModel can be different.

KM3929-08CHCOMPLETE FILTER 2"S.S.CYL.200M



KM3929-3CHCOMPLETE FILTER 2"S.S.CYL.50M.


3/4" screens

2018-05-31

Page 2 / 4



Edition

Amiad filter


KM390708CHCYLINDER AMIAD 3/4" 200M BLACK

KM390710CHCYLINDER AMIAD 3/4"155M YELLOW

KM390713CHRED CYLINDER AMIAD 3/4"-120M.

KM39073CHBLUE CYLINDER AMIAD 3/4"-50M.


1" screens

KM3901708CHBLACK CYLINDER AMIAD 1"-200M.

KM3901710CHCYLINDER AMIAD 1" 155M YELL.

KM3901713CHCYLINDER AMIAD 1" 120M RED

KM390173CHBLUE CYLINDER AMIAD 1"-50MESH


1-1/2" screens

KM3911708CHCYLINDER AMIAD 1-1/2" 200M BL.

KM3911710CHCYLINDER AMIAD 1-1/2" 155M YEL

KM3911713CHCYLINDER AMIAD 1-1/2" 120M RG

KM391173CHCYLINDER AMIAD 1-1/2"-50M BLUE


2" screens

KM39297203CH2" MOULDED SS CYL. 50 MESH



2018-05-31

Page 3 / 4



Edition

Amiad filter



2018-05-31

Page 4 / 4



Edition

Disk filter



Disk filter

- Self-cleaning filter made of polyamide reinforced with fiberglass- Disk filter 3"- Closing system: stainless steel clamp- Maximum working pressure: 10 bar at 20°C- Nominal flow rate: 30 m3/h- Filtering cartridge: disks with deflector- Filtrating surface: 1400 cm2- Minimum backwashing pressure: 3 bar

KMD30120CHDISC FILTER 3"- 120 MESH


Parts

KMD30120-ACHCOVER OF 3"DISC COVER

KMD30120-BCHROTO DISK CART 120MSH XLRG

KMD30120-CCHO RING FOR ROTOFLTR COVER

2018-05-31

Page 1 / 1



Edition

MixRite injector



.08 to 11 gpm injector

The water powered self-priming dosing pumps for the accurate injection of a wide variety of liquid additives (fertilizers, medicines, vitamins, detergents, etc.) into water and other liquids used in agriculture and industry.Work with a minimum pressure loss and assure a precise injection rate can matter the flow as much as it is inside the specifications.- Activated by the water current- Easy to install and to operate- Flow from 0.08 to 11 gallons per minute- Pressure: 3 to 90 PSI- Multiple options available- UV resistant- Total resistance to acid up to 20%

KPCM01CHDEMA MIXRITE 572 0.4-4%

KPCM02CHMIXRITE 2501 FIXED 0.8%

KPCM07CHMIXRITE PUMP 570 .2% TO 2%


0.8 to 22 gpm injectorThe water powered self-priming dosing pumps for the accurate injection of a wide variety of liquid additives (fertilizers, medicines, vitamins, detergents, etc.) into water and other liquids used in agriculture and industry.Work with a minimum pressure loss and assure a precise injection rate can matter the flow as much as it is inside the specifications.- Activated by the water current- Easy to install and to operate- Flow from 0.8 to 22 gallons per minute- Pressure: 14.7 to 120 PSI- Injection rate: 0.2 to 2%- Multiple options available- UV resistant- Total resistance to acid up to 20%- SUPPORT NOT INCLUDED

KPCM05CHMIXRITE TF-5 ADJUST. 0.2 TO 2%

2018-06-12

Page 1 / 4



Edition

MixRite injector



4.4 to 66 gpm injector

The water powered self-priming dosing pumps for the accurate injection of a wide variety of liquid additives (fertilizers, medicines, vitamins, detergents, etc.) into water and other liquids used in agriculture and industry.Work with a minimum pressure loss and assure a precise injection rate can matter the flow as much as it is inside the specifications.- Activated by the water current- Easy to install and to operate- Flow from 4.4 to 66 gallons per minute- Pressure: 14 to 87 PSI- Multiple options available- UV resistant- Pressure loss: 1.45 PSI to 4.4 GPM 13.00 PSI to 66 GPM- SUPPORT NOT INCLUDED

KPCM15CHMIXRITE TF15-002 0.2%-2.5%


2 to 45 gpm injector

The water powered self-priming dosing pumps for the accurate injection of a wide variety of liquid additives (fertilizers, medicines, vitamins, detergents, etc.) into water and other liquids used in agriculture and industry.Work with a minimum pressure loss and assure a precise injection rate can matter the flow as much as it is inside the specifications.- Activated by the water current- Easy to install and to operate- Flow from 2.5 to 45 gallons per minute- Pressure: 14 to 120 PSI- Multiple options available- UV resistant- Pressure loss: 1.45 PSI to 2 GPM 13.00 PSI to 45 GPM- SUPPORT NOT INCLUDED

KPCM10CHMIXRITE TF10-002 0.2%-2% 1.5"

2018-06-12

Page 2 / 4



Edition

MixRite injector



8.8 to 110 gpm injector

The water powered self-priming dosing pumps for the accurate injection of a wide variety of liquid additives (fertilizers, medicines, vitamins, detergents, etc.) into water and other liquids used in agriculture and industry.Work with a minimum pressure loss and assure a precise injection rate can matter the flow as much as it is inside the specifications.- Activated by the water current- Easy to install and to operate- Flow from 8.8 to 110 gallons per minute- Pressure: 14 to 87 PSI- Multiple options available- UV resistant- Pressure loss: 1.4 PSI to 8.8 GPM 14.5 PSI to 110 GPM- SUPPORT NOT INCLUDED

KPCM25CHTF25-002 0.2%-2.5% 2"MPT


Assembled

Injector with concentrate tank (12 or 15 gallons) mounted on a cart.

XKPB03CHPORTABLE MIX-CART HARNOIS


By-pass kit

XKPE002CHKIT BY-PASS 1"DIA. + FILTREUR

2018-06-12

Page 3 / 4



Edition

MixRite injector



Injector & hose

XKPE003CHKIT D'INJECTION + BOYAU + RACC


Tank

KP05GCH5 GAL. PLASTIC TANK

RP040ACHTANK 15GAL.14"DIAM. X 27"H.

2018-06-12

Page 4 / 4



Edition

welcome to the most recent edition of the harnois catalog ... · welcome to the most recent edition...

Documents