welcome to the bioseal cvc powder application computer-based learning module (cbl) who should take...

Welcome to the BioSeal CVC Powder Application Computer-Based Learning Module (CBL)

Who should take this CBL?

• Any clinician that will insert, maintain or remove a Central Venous Catheter (CVC), other catheter or tube

• Any nurse/clinician that may care for patients with bleeding wounds

BioSeal CVC Powder Application

If CBL does not start automatically, select “View Show” from Slide Show menu above.

2BioSeal CVC Powder Application

It will take approximately 20 minutes to navigate through this CBL. Click the links below to jump to selected “chapters” in the course.

IntroductionHospital Uses of BioSeal CVC PowderHow Does BioSeal CVC Powder Work?

Protocol for CVCs and TubesApplication Tips

More Information on BioSeal CVCSummary

References

Menu


Introduction

Course Objectives

• Describe BioSeal CVC Powder

• Explain the many hospital uses of BioSeal CVC Powder

• Describe the mechanism of action of BioSeal CVC Powder

• Discuss the benefits of BioSeal CVC Powder usage

• Learn protocol for applying BioSeal CVC Powder for CVCs and tubes

• List powder application tips

• Learn how to find more information on the product and how to order BioSeal CVC Powder


Introduction

• BioSeal CVC is a topical powder that forms an occlusive seal to stop the flow of blood and exudates from a wound and keep microbes from entering the site.

• The ingredients are a mixture of a hydrophilic polymer and potassium ferrate.

• BioSeal CVC Powder is a brown powder.

• BioSeal CVC Powder is not a vasoconstrictor or a cauterizing agent.

• BioSeal CVC is non-systemic, non-toxic and it is not biologically derived.

What is BioSeal CVC Powder?


How Does BioSeal CVC Work?

BioSeal CVC Powder creates a seal or barrier to stop the flow of blood or exudates. The mechanism of action is a simultaneous two step action:

1. The polymer rapidly dehydrates the blood and absorbs exudates.

2. The potassium ferrate component agglomerates the blood protein creating an occlusive barrier.

Mechanism of Action

Actual electron microscopy image 5 French catheter

Seal

Drypowder

BioSeal CVC Powder



The Difference is the Seal

The “BioSeal” works as an occlusive dressing to:

• Provide a barrier that stops the flow of blood or exudate and prevents microbes from getting in (allows nothing in, nothing out)

• Keep access sites dry and intact

• Create a hostile environment to inhibit microbial activity

• Eliminate 24 or 48-hour dressing changes and cost of dressing change kits

• Increase patient satisfaction (less disruption of site and fewer complications from bleeding/exudate leakage)



More Product Benefits

• Proven to achieve hemostasis in less than two minutes for venous access procedures

• Seal forms independently of the blood clotting cascade (works for patients on anticoagulation therapy)

• Not metabolized by the body and not biologically derived, which minimizes the potential for allergic reactions

• Passed all FDA-required biocompatibility tests

• Easy to use


Hospital Uses of BioSeal CVC

ApplicationsUse BioSeal CVC Powder with the following devices to stop bleeding and oozing and protect the site:

Vascular Devices: (insertions and removal)

• PICCs/Midlines • Central Venous Catheters• Dialysis Catheters• Arterial Catheters

Also effective in controlling bleeding and exudate leakage from Non-Vascular Devices such as:

• Peritoneal dialysis catheters• Epidural catheters• Large-bore needles used for paracentesis,

thoracentesis, or biopsies• PEG/Gastrostomy feeding tubes

Photo by Penny Offer, CRNI



Review QuestionThe ingredients of BioSeal CVC Powder are:

A. An oxidized cellulose gauzeB. A hydrophilic polymer and potassium ferrateC. A calcium alginate wound dressingD. Chitosan and potassium

Place the pointer over the desired answer and click the left mouse button for immediate feedback.



Review QuestionA characteristic or benefit of the “BioSeal” is:

A. It stops bleeding and absorbs exudates.B. It provides a barrier that allows nothing in, nothing out.C. It creates a hostile environment to inhibit microbial activity.D. All of the above.



Protocol for CVCs

1. Insert and secure line per protocol.

2. If gloves are wet with blood or other fluids, clean them with sterile saline and dry them with gauze to prevent BioSeal CVC Powder from sticking to gloves.

3. Pour powder to completely cover the site or If using Powder Containment Device (PCD), fill the PCD with

Powder then maintain leading edge against skin while rolling up over site.

4. Apply continuous firm pressure directly over powder with clean, dry gloved fingers for 2 minutes to form the “BioSeal” and achieve hemostasis. For anticoagulated patients or patients with low platelets, longer holding times may be required.

If using PCD, remove it once hemostasis is achieved, being careful not to disrupt the seal.

5. Cover site with transparent dressing.

6. Apply BioSeal CVC sticker on top of transparent dressing without obstructing view of site.

Line Insertion

Pour Powder

Hold Pressure

Seal is formed


Protocol for CVCs

Dressing Changes/Maintenance

1. Remove transparent dressing from site. Most of powder will come off with the dressing.

2. Gently remove excess powder with dry sterile gauze.

3. Use chlorhexidine to lightly clean around the area. Do not remove the BioSeal. The seal is an integral part of physically preventing microbial colonization down the external surface of the line. Aggressive scrubbing is not recommended as it will damage the seal.

4. Observe site for tissue impressions or skin irritation.

5. Reapply transparent dressing per hospital protocol.


Protocol for CVCs

Pull Backs

If pull back is necessary, brush away excess powder and then use chlorhexidine (or sterile saline) to loosen the “BioSeal”. (The seal must be broken before the catheter can be pulled back.) After pull back, repeat BioSeal CVC Powder application steps.


Protocol for CVCs

Line Discontinuation

1. Remove transparent dressing from site.

2. Brush away any excess powder, remove “BioSeal” with chlorhexidine (or sterile saline) as needed and gently remove line. You may feel an initial “tug” as the seal is broken.

3. Apply BioSeal CVC Powder if bleeding occurs.

4. Dress site per team protocol.


Protocol for PEG Tubes1. Pour BioSeal CVC Powder directly around site/tube. Cover site completely.

2. Apply pressure for two minutes to form the protective seal. If bleeding continues, repeat application.

3. Dress per protocol.

For tube removal:

1. Brush away any excess powder, remove the “BioSeal” with chlorhexidine (or sterile saline) as needed and gently remove tube. You may feel an initial “tug” as the seal is broken.

2. Apply BioSeal CVC Powder and hold pressure if bleeding occurs.

3. Dress site per protocol.


Protocols

Review QuestionIf gloves are wet with blood or other fluids, clean them with sterile saline and dry them with gauze to prevent BioSeal CVC Powder from sticking to gloves.

True

False



Protocols

Review QuestionFor dressing changes you should do which of the following:

A. After removing transparent dressing, remove excess powder with your fingers.B. Remove the "BioSeal" if it is adhered to the line.C. Use chlorhexidine to lightly clean the area. Do not remove seal.D. Scrub aggressively on top of and around the line with chlorhexidine.



• Completely cover site with powder.

• Apply firm, continuous pressure for two minutes directly over site with dry gloved fingers or non-adherent dressing to form the protective seal and achieve hemostasis.

• Leave seal over site; it will fall off naturally on its own, or if needed, may be removed with sterile technique.

Do’s

Application Tips


• Don’t hold pressure over BioSeal CVC Powder with gauze to avoid tearing the seal.

• Don’t check for hemostasis before the recommended holding time. This could disturb the seal formation.

• Don’t use BioSeal for internal bleeding as it is not biodegradable.

Note: Upon application, a temporary warming or sensation may be felt when holding pressure over the powder.

Don'ts

Application Tips


Application Tips

Review QuestionWhen applying BioSeal CVC Powder following line insertion, you should check for hemostasis before the recommended holding time of two minutes.

True

False



Application Tips

Review QuestionWhich of the following should not be used to hold pressure over BioSeal CVC Powder?

A. TelfaB. Dry, gloved fingersC. GauzeD. All of the above



More Information on BioSeal CVC

Educational Tools

There are resources available to educate both patients and clinicians about BioSeal CVC Powder. These resources include:

• Instructions for Patients and Medical Staff

• Posters• Protocol sheets

• These resources are available at www.biosealcvc.com.


More Information on BioSeal CVC

Call Biolife at 800-722-7559 for more information.

Ordering Information

Order Number Product Description

LP606 6 Applications per Box*

LP636 24 Applications per Case*

*Each application contains 1 bottle, 1 Powder Containment Device (PCD), Patient Discharge Instructions and sticker.


This CBL course has focused on:

• Uses of BioSeal CVC Powder in a hospital setting

• The components and mechanism of action of BioSeal CVC Powder

• Benefits of BioSeal CVC usage

• Protocol for applying BioSeal CVC Powder for CVC insertion, maintenance and removal as well as protocol for tubes

• Powder application tips

• How to find more information on the product and how to order BioSeal CVC Powder

Summary


• Wang DS, Chu LF, Olson SE, Miller FJ, Valji K, Wong WH, Rose SC, Austin M, Kuo MD. Comparative Evaluation of Noninvasive Compression Adjuncts for Hemostasis in Percutaneous Arterial, Venous, and Arteriovenous Dialysis Access Procedures. J Vasc Interv Radiol 2008; 19: 72-79.

• Photos are the property of Biolife, LLC.

References/Credits


We hope this Computer Based Learning course has been both informative and helpful.

Feel free to review the screens of this course until you are confident about your knowledge of the material presented.

Exit

Press Esc key to exit presentation and then close PowerPoint® application.*

(*this screen can be customized to interface with each institution’s learning management system).


Review Question Feedback

Return to Course

Your answer is correct! BioSeal CVC Powder is made of a hydrophilic polymer and potassium ferrate.



Return to Course

Your answer is incorrect! BioSeal CVC is made of a hydrophilic polymer and potassium ferrate.



Return to Course

Your answer is correct! BioSeal CVC Powder stops bleeding and absorbs exudates, provides a barrier that allows nothing in, nothing out and creates a hostile environment to inhibit microbial activity.



Return to Course

Your answer is incorrect! All of the above is the correct answer. BioSeal CVC Powder stops bleeding and absorbs exudates, provides a barrier that allows nothing in, nothing out and creates a hostile environment to inhibit microbial activity.



Return to Course

Your answer is incorrect! If gloves are wet with blood or other fluids, they should be cleaned with sterile saline and dried with gauze to prevent BioSeal CVC Powder from sticking to gloves.



Return to Course

Your answer is correct! If gloves are wet with blood or other fluids, they should be cleaned with sterile saline and dried with gauze to prevent BioSeal CVC Powder from sticking to gloves.



Return to Course

Your answer is incorrect! The correct answer is C. Use chlorhexidine to lightly clean the area, but do not remove the “BioSeal”.



Return to Course

Your answer is correct! For dressing changes, use chlorhexidine to lightly clean the area, but do not remove the “BioSeal”.



Return to Course

Your answer is incorrect. When applying BioSeal CVC Powder, do not check for hemostasis before the recommended holding time of 2 minutes as this could disrupt the seal and cause a rebleed.



Return to Course

Your answer is correct! When applying BioSeal CVC Powder, do not check for hemostasis before the recommended holding time of 2 minutes as this could disrupt the Bioseal and cause a rebleed.



Return to Course

Your answer is incorrect. C - Gauze is the correct answer. Gauze should not be used to hold pressure over BioSeal CVC Powder as it can disturb the seal and cause a rebleed.



Return to Course

Your answer is correct! Gauze should not be used to hold pressure over BioSeal CVC Powder as it could disturb the seal and cause a rebleed.

welcome to the bioseal cvc powder application computer-based learning module (cbl) who should take...

Documents