welcome to flexco ® sr rivet hinged r9 heavy-duty fastener systems
TRANSCRIPT
Welcome to Flexco® SR™ Rivet Hinged R9 H
EA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Applications
• Underground Mining
• Copper
• Gold
• Scrap Metal
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Applications
• Designed for the most demanding applications.
• High tension applications. For use on mainline and panel belts with mechanical fastener ratings up to 2000 P.I.W. (350 kN/m).
• Thick belt applications. For thick belts 5/8” to 1” (16-25.5mm) used in front of chute transfer points and for other high impact applications.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Selection Guide
Fastener Size
Belt Thickness Range in. (mm)
Mechanical Fastener Rating P.I.W. (kN/m)
Recommended Minimum Pulley Diameter in. (mm) *
R9 5/8-1 (16-25.5) 2000 (350) 42 (1050)
* Operating tension under 100% of belt rating.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Metal Selection
• Stainless (Type 316): Provides extra resistance to abrasion, magnetic attraction, and corrosion from acids and other chemicals.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Rivet Selection
• Packaged in box or in bulk quantities.
• Rivets are available in either steel or stainless steel.
• For installation with the Flexco® Power Set™ Rivet Driver use specially designed Power Set™ Rapid Loader™ Collated Rivets.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Hinge Pin Selection
• A selection of hinge pins makes it easy to match hinge pins to the needs of the application.
• Nylon Covered Stainless Cable: Designed for abrasive and corrosive applications.
• 5/8” Diameter: For rivet sizes G, H and I.
• 3/4” Diameter: For rivet sizes J, K and L.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Features & Benefits
• Fast, easy installation.
• Built-in viewports in each plate assures proper installation alignment.
• Can be installed with either the portable MSRT9 or the Flexco® Power Set™ Rivet Driver.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Features & Benefits
• Fastener/Belt Cleaner compatibility.
• Used with Mineline® family of belt cleaners, the Scalloped Edge™ and low profile reduces fastener impact for cleaner blades, skirt rubber and return idlers.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Features & Benefits
• For the most demanding high-tension or thick belt applications, R9 has greater reachback, a thicker plate and an enhanced loop area to accommodate a larger diameter hinge pin.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Installation Tools
• R9 can be installed with the portable MSRT9 installation tool and a 6lb. (2.7kg) hammer. The MSRT9 installs R9 fasteners only.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Installation Tools
• Or use the Flexco® Power Set™ Rivet Driver.
• The Power Set was designed to reduce operator fatigue, safely speed up installation of Flexco® SR™ belt fasteners and provide consistent, controlled and uniform splices each and every time.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Installation Tools
• Far-Pul® HD® Belt Clamps are easy-to-use, lightweight and specially engineered for heavy-duty applications.
• Load capacity up to 2.7 metric tons (3 tons) when used with two 1-1/2 ton come-alongs.
• Provides even tensioning across entire belt width.
• Securely grips belts up to 25mm (1”) thick.
• Easily adjusts to fit a variety of belt widths.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Installation Tools
• Make straighter cuts – time after time – with the lightweight, easy-to-use 840 Series Belt Cutter.
• Cuts in both directions.
• Designed to enhance operator safety.
• Grips belts securely.
• Safety blade is shielded from operator contact.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Installation Tools
• Portable, lightweight FSK™ Belt Skiver adjusts easily and precisely to various cutting depths.
• Use on rubber-covered belts with top covers of 4.5mm (3/16”) or more.
• Provides skives from 1.5-10mm (1/16”-3/8”) deep in a single pass.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Installation Tool
• Reduce friction on metal tools, and rubber or fabric belt surfaces with Flexco® Silicone Lubricant.
• Makes cutting or punching holes in belting easier.
• Non-flammable.
• Does not contain fluorocarbons.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Installation Tools
• Double-edged blade cuts in either direction.
• The Alligator® 300 Series Belt Cutter delivers clean, straight cuts quickly and safely.
• For belts of any width up to 28mm (1-1/8”) thick.
HEA
VY-D
UTY FA
STEN
ER
SYS
TEM
S
Installation Tools
• Belt grips can be used on belts up to 16mm (5/8”) thick and come in pairs.
• When Belt Grips are slipped over belt edge at a right angle, belts can be pulled without damaging the belt surfaces.
• Makes pulling belting by hand a lot easier.