wedding card layout - kreinik.com · wedding card by karen grant combine rubber stamping with...

1
Rubber-stamped Wedding card BY KAREN GRANT Combine rubber stamping with embellishing for a one-of-a- kind wedding card (perfect for a fun couple). Instructions: 1. With the black ink pad, stamp “Happy Wedding Day” randomly on the silver cardstock. You may want to pre- stamp onto a blank sheet of paper to remove some of the black ink before stamping onto your silver. That will make this background more subtle. 2. On your white cardstock, stamp a male figure and a female figure using Crayon Kids stamps (or something simi- lar). Color the male’s pants black. Cut out around each fig- ure, then adhere to your silver card using double-sided tape cut from your roll of Treasure Tape™. 3. Cut pieces of Treasure Tape™ to fit over these areas only: the male’s shirt area, pants, and shoes. These can be separate pieces of tape, trimmed to fit within the stamped areas. 4. Cut pieces of Treasure Tap™ in the same way to cover these areas on the female figure: body/dress, shoes, and cut a piece to resemble a veil. 5. Working the male first, remove the red liner to expose the sticky tape. Outline the shirt with 1/8” Ribbon 3231 Moonstone. Outline the pants with Black Facets. Attach black Vintage Finds or buttons on shirt and shoes as shown in the photo. 6. On the female, remove the red liner to expose sticky tape. Outline dress and shoes in 1/8” Ribbon 3231. Adhere white/pearl Vintage Finds or buttons on veil, dress, and shoes as shown in photo. 7. Place card in a shallow pan and cover with Diamond Beadlets®. Make sure all remaining sticky areas are covered with the clear beads. 8. From your Treasure Tape™ cut out three small heart shapes. Adhere heart-shaped buttons or Vintage Finds. If any sticky tape is still exposed, cover with Diamond Beadlets®. © Copyright 2005 Kreinik. Tape, beads, Kreinik threads available from www.kreinik.com Materials needed: • 1-inch roll of double-sided Treasure Tape™ • Diamond Beadlets® • Kreinik 1/8" Ribbon 3231 Moonstone • Kreinik Facets in black • Vintage Finds: white/pearl collec- tion and black collection (or your own flat-backed white and black cabochons) • Scissors (we use Fiskars® brand non-stick scissors) • "Happy Wedding Day" stamp (from Stampin Up’s All Year Cheer III set) • People stamps (from Stampin Up’s Crayon Kids set) • Silver cardstock, cut to 8.5" x 5.5", then folded to make a vertical blank card • white cardstock • Black ink stamp pad • Black colored pencil • Shallow pan or tray

Upload: others

Post on 12-Oct-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: wedding card layout - kreinik.com · Wedding card BY KAREN GRANT Combine rubber stamping with embellishing for a one-of-a-kind wedding card (perfect for a fun couple). Instructions:

Rubber-stamped

Wedding cardBY KAREN GRANT

Combine rubber stamping with embellishing for a one-of-a-kind wedding card (perfect for a fun couple).

Instructions:1. With the black ink pad, stamp “Happy Wedding Day”

randomly on the silver cardstock. You may want to pre-stamp onto a blank sheet of paper to remove some of theblack ink before stamping onto your silver. That will makethis background more subtle.

2. On your white cardstock, stamp a male figure and afemale figure using Crayon Kids stamps (or something simi-lar). Color the male’s pants black. Cut out around each fig-ure, then adhere to your silver card using double-sided tapecut from your roll of Treasure Tape™.

3. Cut pieces of Treasure Tape™ to fit over these areasonly: the male’s shirt area, pants, and shoes. These can beseparate pieces of tape, trimmed to fit within the stampedareas.

4. Cut pieces of Treasure Tap™ in the same way to coverthese areas on the female figure: body/dress, shoes, and cuta piece to resemble a veil.

5. Working the male first, remove the red liner to exposethe sticky tape. Outline the shirt with 1/8” Ribbon 3231Moonstone. Outline the pants with Black Facets. Attachblack Vintage Finds or buttons on shirt and shoes as shownin the photo.

6. On the female, remove the red liner to expose stickytape. Outline dress and shoes in 1/8” Ribbon 3231. Adherewhite/pearl Vintage Finds or buttons on veil, dress, andshoes as shown in photo.

7. Place card in a shallow pan and cover with DiamondBeadlets®. Make sure all remaining sticky areas are coveredwith the clear beads.

8. From your Treasure Tape™ cut out three small heartshapes. Adhere heart-shaped buttons or Vintage Finds. If anysticky tape is still exposed, cover with Diamond Beadlets®.

© Copyright 2005 Kreinik. Tape, beads, Kreinik threads available fromwww.kreinik.com

Materials needed:• 1-inch roll of double-sided TreasureTape™• Diamond Beadlets®• Kreinik 1/8" Ribbon 3231Moonstone• Kreinik Facets in black• Vintage Finds: white/pearl collec-tion and black collection (or yourown flat-backed white and blackcabochons)• Scissors (we use Fiskars® brandnon-stick scissors)• "Happy Wedding Day" stamp (fromStampin Up’s All Year Cheer III set)• People stamps (from Stampin Up’sCrayon Kids set)• Silver cardstock, cut to 8.5" x 5.5",then folded to make a vertical blankcard• white cardstock• Black ink stamp pad• Black colored pencil• Shallow pan or tray