· web viewasme a112.19.3/csa b45.4 - stainless steel plumbing fixtures (designed for residential...

SECTION 22 40 00PLUMBING SPECIALTIES

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2016 - 2016 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Commercial Lavatories.

B. Commercial Service Basins.

C. Commercial Service Sinks.

D. Clinic Sinks.

E. Plaster Interceptors.

F. Scrub Sinks.

G. Commercial, Vitreous-China Water Closets.

H. Residential Water Closets.

I. Toilet Seats.

J. Commercial Urinals.

K. Waterless Urinals.

L. Commercial Showers.

M. Commercial Lavatory Faucets.

N. Sink Faucets.

O. Commercial and Residential Shower Faucets.

P. Bedpan Washers.

Q. Faucet Supply Fittings.

R. Sink and Lavatory Waste Fittings.

S. Urinal Flushometer Valves.

T. Water Closet Flushometer Valves.

U. Water Closet Waste Carriers.

V. Support Fixtures.

22 40 00-1

1.2 RELATED SECTIONS:

A. Section 23 05 00 - Common Work Results for HVAC.

B. Section 22 10 00 - Plumbing Piping.

C. Section 22 14 26.13 - Roof Drains.

D. Section - .

E. Section 40 10 00 - Gas and Vapor Process Piping.

1.3 REFERENCES

A. American Society of Mechanical Engineers (ASME):1. ASME A112.6.1M - Supports for Off-the-Floor Plumbing Fixtures for Public Use.2. ASME A112.6.7 Sanitary Floor Sinks3. ASME A112.18.1/CSA B125.1 - Plumbing Supply Fittings.4. ASME A112.18.2/CSA B125.2 - Plumbing Waste Fittings.5. ASME A112.18.6/CSA B125.6 - Flexible Water Connectors.6. ASME A112.19.1/CSA B45.2 - Enameled Cast Iron and Enameled Steel Plumbing

Fixtures.7. ASME A112.19.2/CSA B45.1 - Vitreous China Plumbing Fixtures and Hydraulic

Requirements for Water Closets and Urinals.8. ASME A112.19.3/CSA B45.4 - Stainless Steel Plumbing Fixtures (Designed for

Residential Use).9. ASME A112.19.5 / CSA B45.15 - Flush Valves and Spuds for Water Closets, Urinals,

and Tanks.10. ASTM A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets

used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems.

11. ASME A112.4.3. - Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System.

12. ASME B1.20.1 - Pipe Threads, General Purpose, Inch.

B. American Society of Safety Engineers (ASSE):1. ASSE 1016 / ASME A112.1016 / CSA 125.16- Performance Requirements for

Automatic Compensating Valves for Individual Showers and Tub/Showers Combinations.

2. ASSE 1037/ASME A112.1037/CSA B125.37 - Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures.

C. ASTM International (ASTM):1. ASTM A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets

used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems.

D. International Code Counsel:1. ICC/ANSI A117.1 - Accessible and Usable Buildings and Facilities.

E. National Science Foundation:1. NSF 61 - Drinking Water System Components - Health Effects.

F. Safe Drinking Water Act:1. Section 1417(d) of the Safe Drinking Water Act

G. Plumbing and Drainage Institute:1. PDI-WH 201 - Water Hammer Arresters.

22 40 00-2

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Each fixture type.1. Include dimensions, finishes, construction information, capacities, operation

instructions and accessories.2. Control, signal and power wiring diagrams.

C. Maintenance data for all products.1. Repair kit information for all fixtures.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications:1. Minimum 5 years manufacturing similar products.

B. Installer Qualifications:1. Minimum 2 years installing similar products.2. Installer's responsibilities:

a. Design, fabrication, and installation for fixtures and connections.b. Professional engineering services to assume engineering responsibility.

1) Working plans.2) Calculations.3) Field test report.

C. Regulatory Compliance Requirements:1. Utility company supplying the water.

a. Tapping of water mains.b. Backflow prevention.

2. Authorities having jurisdiction: Materials, installation, and testing.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.1. Protect internal parts, valve ends, and specialties against corrosion, dirt, and damage.2. Store valves set in closed position.3. Storage:

a. Indoors: Higher than ambient dew point temperature.b. Outdoors: Watertight enclosures off ground.

B. Handling: Comply with manufacturer's recommendations. Avoid damaging components.1. Large Valves: Operating handles or stems are not rigging points for slings.

1.7 PROJECT CONDITIONS

A. Interruption of Fire-Suppression Water-Service Piping:1. Arrange temporary water-distribution service.2. Notify Owner or Owner's representative no fewer than two business days in advance

of proposed interruption of service.a. Proceed upon written permission.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Zurn Industries LLC, which is located at: 511 W. Freshwater Way;

22 40 00-3

Milwaukee, WI 53204; Toll Free Tel: 855-663-9876; Email:request info ([email protected]); Web:www.zurn.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 COMMERCIAL LAVATORIES

A. Enameled, Cast Iron Counter Mounted Lavatory: Oval, self-rimming.1. Basis-of-Design Zurn Industries, LLC;

a. Model Z5810 Series.b. Model Z5820 Series.c. Nominal Size:

1) Oval, 20 by 17 inches (508 by 432 mm).2) Oval, 22 by 18 inches (559 by 457 mm).3) Round, 19 inches (483 mm).

B. Vitreous China Counter Mounted Lavatory: Oval or round, self-rimming.1. Basis-of-Design Zurn Industries, LLC;

a. Model Z5110 Series.b. Model Z5120 Series.c. Nominal Size:

1) Oval, 20 by 17 inches (508 by 432 mm).2) Round, 19 inches (483 mm).

C. Vitreous China Undercounter Mounted Lavatory: Oval.1. Basis-of-Design Zurn Industries, LLC;

a. Model Z5220.2. Nominal Size: Oval.

a. 19 by 16 inches (483 by 406 mm).

D. Enameled, Cast Iron Wall Mounted Lavatory: Rectangular.1. Basis-of-Design: Zurn Industries, LLC;2. Model Z5830 Series.3. Model Z5840 Series.4. Nominal Size: Rectangular.

a. 19 by 17 inches (483 by 432 mm).b. 20 by 18 inches (508 by 457 mm).

E. Vitreous China Wall-Mounted Lavatory:1. Basis-of-Design: Zurn Industries, LLC; With Back

a. Model Z5340 Series.b. Model Z5360 Series:

2. Basis-of-Design: Zurn Industries, LLC; With Ledge Back.a. Model Z5340 Series.b. Model Z5360 Series.

3. Basis-of-Design: Zurn Industries, LLC; Slab Type:a. Model Z5310 Series

4. Basis-of-Design: Zurn Industries, LLC; Wheelchair.a. Model Z5320 Series.b. Nominal Size: Rectangular.

1) 19 by 16 inches (483 by 406 mm).2) 20 by 18 inches (381 by 457 mm).3) 23 by 20 inches (584 by 381 mm).

5. Lavatory Attributes:

22 40 00-4

a. Standard: ASME A112.19.2/CSA B45.1.b. Faucet-Hole Punching:

1) One hole.2) Three holes, 4-inch (102-mm) centers.3) Three holes, 8-inch (203-mm) centers.

c. Faucet-Hole Location:1) Top.2) On Countertop.

d. Color: White.e. Mounting Material:

1) Sealant.2) Undercounter mounting kit.3) Wall bracket.4) Chair Carrier (wheelchair accessible).

f. Support Fixture: ASME A112.6.1M, Type II, lavatory carrier.1) Include rectangular, steel uprights.2) Basis-of-Design: Zurn Industries, LLC;

a) Model Z1231.b) Model Z1231-EZ.c) Model Z1231-EZR.

g. Faucet: ______.

F. Security Vitreous-China Wall Mounted Lavatories:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5310 Series.b. Model Z5320 Series.c. Model Z5340 Series.d. Model Z5350 Series.e. Model Z5360 Series.

2. Lavatory Attributes:a. Standard: ASME A112.19.2/CSA B45.1.b. Material: Vitreous china.c. Bowl: Oval or rectangular bowl, soap depression, and wall bracket.d. Supply Valves: Factory-installed push-button, self-closing, chrome-plated brass

faucets; Hot- and Cold-Water.e. Drain: Grid with NPS 1-1/2 (DN 40) tailpiece.

3. Waste Fittings: ASME A112.18.2/CSA B125.2.a. Trap NPS 1-1/4 (DN 32) minimum waste.

4. Support Fixture: ASME A112.6.1M, Type II lavatory carrier.a. Basis-of Design Product: Zurn Industries LLC;

1) Model Z1231.2) Model Z1231-EZ.3) Model Z1231-EZR.

5. Support Fixture: ASME A112.6.1M, Type III lavatory carrier.a. Basis-of Design Product: Zurn; Model Z1224.

2.3 COMMERCIAL SERVICE BASINS

A. Service Basin: Plastic, floor mounted.1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z1996-24.b. Model Z1996-36.c. Faucet:

1) Model Z812-XL-TWM.2) Model Z871-XL-TWM.3) Model Z841-XL Series.

22 40 00-5

4) Model Z842-XL Series.5) Model Z843-XL Series.

2. Mounting: On floor and flush to wall.3. Service Basin Attributes:

a. Standard: CSA B45.5/IAPMO Z124.b. Material: Cast polymer.c. Nominal Size:

1) 24 by 24 by 10 inches (610 by 915 mm by 255 mm).2) 36 by 24 by 10 inches (915 by 915 by 255 mm).

d. Tiling Flange:1) On one side.2) On two sides.3) On three sides.

e. Rim Guard: On top surfaces.1) Front.2) All.

f. Color: ______.g. Drain: With Grid

1) NPS 2 (DN 50).2) NPS 3 (DN 80).

2.4 COMMERCIAL SERVICE SINKS

A. Service Sink with Back: Enameled, cast iron, trap standard mounted1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5880 Series.b. Model Z5890 Series.

B. Service Sink with Back: Vitreous china, trap standard mounted.1. Basis-of-Design: Zurn Industries, LLC; None.

C. Service Sink with Front Apron and raised Back: Enameled, cast iron, floor mounted.1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5850 Series.b. Service Sink Attributes:c. Faucet: Zurn.

1) Model Z812-XL-TWM.2) Model Z871-XL-TWM.3) Model Z841-XL Series.4) Model Z842-XL Series.5) Model Z843-XL Series.

d. Fixture:1) Standard: ASME A112.19.1/CSA B45.2.2) Back:

a) Two faucet holes.b) Plain.

e. Nominal Size:1) 22 by 18 inches (560 by 457 mm).2) 24 by 20 inches (610 by 508 mm).3) 28 by 28 inches

f. Color: White.g. Mounting: P-trap standard with grid strainer inlet, cleanout, and floor flange.

1) NPS 2 (DN 50).2) NPS 3 (DN 80).

h. Rim Guard: On front and sides.

2.5 CLINIC SINKS

22 40 00-6

A. Vitreous-china, flushing-rim, Wall-Mounted Clinic Sinks:1. Basis-of-Design: Zurn Industries, LLC; Model Z5410 Series.

a. Outlet: Back.b. Blowout type.c. Nominal Size: 22 by 19 inches (559 by 483 mm).

B. Vitreous-china, flushing-rim, Floor-Mounted Clinic Sinks:1. Basis-of-Design: Zurn Industries, LLC; Model Z5420.

a. Outlet: Bottom.1) NPS 4 (DN 100).2) NPS 3 (DN 80).

b. Siphon-jet type.c. Nominal Size: 27 by 20 inches (685 by 510 mm).

2. Clinic Sink Attributes:a. Standard: ASME A112.19.2/CSA B45.1.b. Color: White.c. Rim Guard: Stainless steel, on front.

3. Flushometer Valve: Zurn Industries LLC;a. Model Z6017AV.b. Model Z60842AV.c. Faucet: Zurn; Model Z842-XL.d. Supply Fittings: Zurn, Model Z8808-XL.e. Sink Base Height: 10 inches (254 mm).f. Support: ASME A112.61M, Type IV, carrier model Z1229.

2.6 SOLIDS INTERCEPTORS

A. Basis-of-Design: Zurn Industries, LLC;1. Model Z1180, round.2. Model Z1181, square.3. Removable cover: Cast-iron or steel body.

a. Acid-resistant-enameled coating interior and exterior.b. Metal Screen or strainer: Removable, corrosion-resistant metal.

1) Inlet and outlet:a) NPS 1-1/2 (DN 40).b) NPS 2 (DN 50).

2.7 SCRUB SINKS

A. Vitreous China, Wall-Mounted, Scrub Sinks:1. Basis-of-Design: Zurn Industries, LLC; Model Z5460 Series.2. Standard: ASME A112.19.2/CSA B45.1.3. Nominal Size: Back ledge, single faucet hole.

a. 28 by 22 inches (710 by 560 mm).4. Color: White.5. Drain: Grid, NPS 1-1/2 (DN 40).6. Faucet: Zurn, Model ______.7. Supply Fittings: Zurn, Model ______.8. Waste Fittings: Zurn, Model ______.9. Support: ASME A112.6.1M, Type III sink carrier, model Z1224.

2.8 COMMERCIAL, VITREOUS-CHINA WATER CLOSETS

A. Commercial: Floor-Mounted, Bottom-outlet, Top Spud:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5655-BWL Standard Height.b. Model Z5665-BWL ADA Height.

22 40 00-7

c. Model Z5654-BWL Standard Height with a 14 inch (356 mm) rough in.2. Flushometer Valve:

a. Model Z6000AV Manual.b. Model Z6200 Manual Piston.c. Model ZTR6200 Battery Powered Solenoid Sensor.d. Model ZER6000AV-CPM Battery Powered Diaphragm.e. Model ZTR6200EV-LL 10 year battery powered piston operated, solenoid

activated.f. Model ZEMS6000AV hardwired diaphragm in wall sensor.g. Model ZEMS6000AV-IS is hardwired diaphragm side mounted sensor.

B. Commercial: Floor-Mounted, Bottom-Outlet, Child's:1. Basis-of-Design: Zurn Industries, LLC; Model Z5675-BWL.2. Flushometer Valve:

a. Model Z6000AV Manual.b. Model Z6200 Manual Piston.c. Model ZTR6200 Battery Powered Solenoid Sensor.d. Model ZER6000AV-CPM Battery Powered Diaphragm.e. Model ZTR6200EV-LL 10-year battery powered piston operated, solenoid


C. Commercial: Wall-Mounted, Top Spud, Accessible:1. Basis-of-Design: Zurn Industries, LLC; Model Z5615-BWL.2. Flushometer Valve:

a. Model Z6000AV Manual.b. Model Z6200 Manual Piston.c. Model ZTR6200 Battery Powered Solenoid Sensor.d. Model ZER6000AV-CPM Battery Powered Diaphragm.e. Model ZTR6200EV-LL 10-year battery powered piston operated, solenoid


D. Commercial: Floor-Mounted, Back Outlet, Top Spud:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5630-BWL.b. Model Z5635-BWL.c. Model Z5640-BWL.d. Model Z5645-BWL.

2. Flushometer Valve:a. Model Z6000AV Manual.b. Model Z6200 Manual Piston.c. Model ZTR6200 Battery Powered Solenoid Sensor.d. Model ZER6000AV-CPM Battery Powered Diaphragm.e. Model ZTR6200EV-LL 10-year battery powered piston operated, solenoid

activated.f. Model ZEMS6000AV hardwired diaphragm in wall sensor.g. Model ZEMS6000AV-IS is hardwired diaphragm side mounted sensor.h. Support:

1) Model Z1203-94.2) Model Z1204-94.

E. Commercial: Wall-Mounted, Blowout, Back Spud, Accessible:1. Basis-of-Design: Zurn Industries, LLC; None.

22 40 00-8

2. Flushometer Valve:a. Model Z6000AV.b. Model ZTR6200.c. Model ZER6000AV-CPM.d. Model ZTR6200EV-LL.e. Model ZEMS6000AV.f. Model ZEMS6000AV-IS.

3. Support; Standard Adjustable Blowout Style Water Closet Carriers:a. Horizontal Waste Fitting:

1) Model Z1203-N.2) Model Z1203-N-XH.3) Model Z1203-N-XB.

b. Vertical Waste Fitting:1) Model Z1204-N.2) Model Z1204-N-XH.3) Model Z1204-N-XB.

F. Commercial: Wall-Mounted, Blowout, Top Spud, Accessible:1. Basis-of-Design: Zurn Industries, LLC; None.2. Flushometer Valve:

a. Model Z6000AV Manual.b. Model ZER6000AV-CPM Battery Powered Diaphragm.c. Model ZEMS6000AV hardwired diaphragm in wall sensor.d. Model ZEMS6000AV-IS is hardwired diaphragm side mounted sensor.

3. Support; Standard Adjustable Blowout Style Water Closet Carriers:a. Horizontal Waste Fitting:

1) Model Z1203-N.2) Model Z1203-N-XH.3) Model Z1203-N-XB.


G. Healthcare: Floor-Mounted, Bottom Outlet, top or Back Spud. Accessible:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5656-BWL Standard height.b. Model Z5666-BWL Ada Height.

2. Flushometer Valve:a. Model Z6000AV Manual.b. Model Z6200 Manual Piston.c. Model ZTR6200 Battery Powered Solenoid Sensor.d. Model ZER6000AV-CPM Battery Powered Diaphragm.e. Model ZTR6200EV-LL 10-year battery powered piston operated, solenoid


H. Healthcare: Floor-Mounted, Back Outlet, Back or Top Spud, Accessible:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5636-BWL.b. Model Z5646-BWL.

2. Flushometer Valve:a. Model Z6000AV Manual.b. Model Z6200 Manual Piston.c. Model ZTR6200 Battery Powered Solenoid Sensor.

22 40 00-9

d. Model ZER6000AV-CPM Battery Powered Diaphragm.e. Model ZTR6200EV-LL 10-year battery powered piston operated, solenoid


3. Support Waste Carriers:a. Model Z1203-94.b. Model Z1204-94.

I. Healthcare: Wall-Mounted, Top or Back Spud, Accessible:1. Basis-of-Design: Zurn Industries, LLC; Z5616-BWL.2. Flushometer Valve:

a. Model Z6000AV Manual.b. Model Z6200 Manual Piston.c. Model ZTR6200 Battery Powered Solenoid Sensor.d. Model ZER6000AV-CPM Battery Powered Diaphragm.e. Model ZTR6200EV-LL 10 year battery powered piston operated, solenoid


3. Support: High Performance, Adjustable Siphon Jet Water Closet Carriers:a. Horizontal Waste Fitting:

1) Model Z1201-NL3.2) Model Z1201-NR3.3) Model Z1201-ND3.4) Model Z1201-NL4.5) Model Z1201-NR4.6) Model Z1201-ND4.7) Model Z1201-HL4.8) Model Z1201-HR4.9) Model Z1201-HD4.

b. Vertical Waste Fitting:1) Model Z1202-N4.2) Model Z1202-ND4.3) Model Z1202-H4.4) Model Z1202-HD4.5) Model Z1202-1NL4.6) Model Z1202-1NR4.7) Model Z1202-1ND4.8) Model Z1202-2N4.9) Model Z1202-2ND4.10) Model Z1202-1HL4.11) Model Z1202-1HR4.12) Model Z1202-1HD4.

J. Commercial: Floor-Mounted, Bottom Outlet, Back Spud:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5657-BWL Standard height.b. Model Z5667-BWL ADA Height.

2. Flushometer Valve:a. Model Z6152AV Manual.b. Model ZER6152AV Battery Powered Diaphragm.c. Model ZEMS6152AV hardwired diaphragm in wall sensor.

K. Commercial: Wall-Mounted, Back Spud, Accessible:1. Basis-of-Design: Zurn Industries, LLC; Z5617-BWL.

22 40 00-10

2. Flushometer Valve:a. Model Z6152AV Manual.b. Model ZER6152AV Battery Powered Diaphragm.c. Model ZEMS6152AV hardwired diaphragm in wall sensor.

3. Support: High Performance, Adjustable Siphon Jet Water Closet Carriers.a. Horizontal Waste Fitting:

1) Model Z1201-NL3.2) Model Z1201-NR3.3) Model Z1201-ND3.4) Model Z1201-NL4.5) Model Z1201-NR4.6) Model Z1201-ND4.7) Model Z1201-HL4.8) Model Z1201-HR4.9) Model Z1201-HD4.


c. Bariatric, Adjustable Siphon Jet Water Closet Carriers:1) Horizontal Waste Fitting:

a) Model Z1203-N-XH.b) Model Z1203-N-XB.

d. Vertical Waste Fitting:a) Model Z1204-N-XH.b) Model Z1204-N-XB.

L. Security: Floor-Mounted, Back Outlet, Blowout:1. Basis-of-Design: Zurn Industries, LLC; None.2. Flushometer Valve:

a. Model ZP6800 Series.b. Model ZH6600 Series.c. Model Z6600 Series.d. Model ZEMS6000AV Series.

3. Support Waste Carrier:a. Z1203-N-Fb. Z1204-N-F

M. Security: Floor-Mounted, Back Outlet, Siphon Jet, Top Spud:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5635-BWL.b. Model Z5645-BWL.

2. Flushometer Valve:a. Model ZP6800 Series.b. Model ZH6600 Series.c. Model Z6600 Series.d. Model ZEMS6000AV Series.

22 40 00-11

3. Support Waste Carrier:a. Z1203-N-Fb. Z1204-N-F

4. Vitreous-China Water Closet Attributes:a. Standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.5.b. Material: Vitreous china.c. Type: Siphon jet.d. Reverse trap.e. Style: Flushometer valve.f. Height:

1) Standard.2) Child.3) Handicapped/elderly, complying with ICC/ANSI A117.1.

g. Rim Contour:1) Elongated.2) Modified elongated.3) Elongated with bedpan lugs or slots.4) Elongated with integral trap and contoured seat.5) Regular.

h. Water Consumption:1) 1.28 gal. (4.8 L)2) 1.6 gal. (6 L) per flush.

i. Spud Size and Location: NPS 1-1/2 (DN 40).1) Back.2) Top.

j. Color: White.k. Bowl-to-Drain Connecting Fitting: ASTM A1045 or ASME A112.4.3.l. Toilet Seat: Z5955 Series.

1) IAPMO/ANSI Z124.5, Type A (residential), Shape 3 (elongated rim), open front, without cover, and shaped to match bowl.

2.9 RESIDENTIAL WATER CLOSETS

A. Floor-mounted, Floor Outlet, Close-Coupled (Gravity Tank), Vitreous China:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5530.b. Model Z5540.c. Model Z5550.d. Model Z5551.e. Model Z5552.f. Model Z5553.g. Model Z5590.

B. Floor-mounted, Floor Outlet, Close Coupled (Flushometer Tank), Vitreous China:1. Pressure Assist Toilets, 1.1-Gal./Flush (3.8-L/Flush) Water Closets:

a. Basis-of-Design: Zurn Industries, LLC;1) Model Z5561.2) Model Z5571.3) Model Z5576.

2. Pressure Assist Toilets, 1.6/1.1-Gal./Flush (6/3.8-L/Flush) Dual Flush Water Closets:a. Basis-of-Design: Zurn Industries, LLC:

1) Model Z5562.2) Model Z5572.3) Model Z5576.

3. Pressure Assist Toilet, 1.6-Gal./Flush (6-L/Flush) Water Closets:a. Basis-of-Design: Zurn Industries, LLC;

22 40 00-12

1) Model Z5560.2) Model Z5570.3) Model Z5575.

b. Residential Water Closet Attributes:c. Standards: ASME A112.19.2/CSA B45.1.d. Bowl Type: Siphon jet.e. Height:

1) Standard.2) Child.3) Handicapped and elderly.

f. Rim Contour:1) Elongated.2) Regular.

g. Water Consumption:1) Water saving.2) Low.

h. Color: White.4. Toilet Seat: Model Z5955 Series.5. Supply Fittings:

a. Standard: ASME A112.18.1/CSA B125.1.b. Supply Piping: Chrome-plated brass pipe or copper tube.

1) Chrome-plated wall flange.c. Stop: Quarter-turn, Chrome-plated-brass, ball valve or compression stop.

1) Inlet connection type and size: match supply piping.2) Operation:

a) Loose key.b) Wheel handle.

d. Riser:1) Size:

a) NPS 3/8 (DN 10).b) NPS 1/2 (DN 15).

2) Material:a) Chrome-plated, soft-copper flexible tube.b) ASME A112.18.6 / CSA B125.6, braided- or corrugated-stainless-

steel flexible hose.

2.10 TOILET SEATS

A. Basis-of-Design: Zurn Industries, LLC; Z5955 Series:1. Standard: IAPMO/ANSI Z124.5.2. Material: Plastic.3. Type:

a. Standard.b. Heavy duty.

4. Shape:a. Elongated rim, open front.b. Elongated rim, closed front.

5. Hinge:a. Check.b. Self-sustaining.c. Self-sustaining, check.d. Self-raising.

6. Hinge Material: Noncorrosive metal.7. Seat Cover:

a. Required.b. Not required.

22 40 00-13

8. Color: White.

2.11 COMMERCIAL URINALS

A. Stall, Washout Type:1. Basis-of-Design: Zurn Industries, LLC; None.2. Flushometer Valve:

a. Model Z6003AV Manual diaphragm.b. Model Z6203 Manual Piston.c. Model ZTR6203 Battery Powered Solenoid Sensor.d. Model ZER6003AV-CPM Battery Powered Diaphragm.e. Model ZTR6203EV-LL 10-year battery powered piston operated, solenoid


B. Wall-Hung, Back Outlet, Blowout:1. Basis-of-Design: Zurn Industries, LLC; None.2. Flushometer Valve:

a. Model Z6003AV Manual diaphragm.b. Model Z6203 Manual Piston.c. Model ZTR6203 Battery Powered Solenoid Sensor.d. Model ZER6003AV-CPM Battery Powered Diaphragm.e. Model ZTR6203EV-LL 10-year battery powered piston operated, solenoid


C. Wall-Hung, Back Outlet, Siphon Jet, Accessible:1. Basis-of-Design: Zurn Industries, LLC; Model Z5730.2. Flushometer Valve.

a. Model Z6003AV Manual diaphragm.b. Model ZTR6203 Battery Powered Solenoid Sensor.c. Model ZER6003AV-CPM Battery Powered Diaphragm.d. Model ZTR6203EV-LL 10-year battery powered piston operated, solenoid

activated.e. Model ZEMS6003AV hardwired diaphragm in wall sensor.f. Model ZEMS6003AV-IS is hardwired diaphragm side mounted sensor.

D. Wall-Hung, Back Outlet, Washout, Accessible:1. Basis-of-Design: Zurn Industries, LLC;

a. Model Z5708-U.b. Model Z5738-U.c. Model Z5755-U.d. Model Z5758-U.e. Model Z5765-U.

2. Flushometer Valve:a. Model Z6003AV Manual diaphragm.b. Model Z6203 Manual Piston.c. Model ZEG6003EV Battery Powered Solenoid Sensor.d. Model ZTR6203 Battery Powered Solenoid Sensor.e. Model ZER6003AV-CPM Battery Powered Diaphragm.f. Model ZTR6203-LL 10-year battery powered piston operated, solenoid

activated.g. Model ZEMS6003AV hardwired diaphragm in wall sensor.h. Model ZEMS6003AV-IS is hardwired diaphragm side mounted sensor.

22 40 00-14

E. Wall-Hung, Bottom Outlet, Washout or Wall-Hung, Bottom Outlet, Wash Down:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z5720.2. Flushometer Valve:

a. Model Z6003AV Manual diaphragm.b. Model Z6203 Manual Piston.c. Model ZTR6203 Battery Powered Solenoid Sensor.d. Model ZER6003AV-CPM Battery Powered Diaphragm.e. Model ZTR6203-LL 10-year battery powered piston operated, solenoid

activated.f. Model ZEMS6003AV hardwired diaphragm in wall sensor.g. Model ZEMS6003AV-IS is hardwired diaphragm side mounted sensor.h. ASME A112.6.1M, Type II, Urinal carrier, model Z1221 or Z1222.

3. Waste Fitting: Two-piece trap and swivel elbow and wall flange.a. Stainless steel.b. Chrome plated brass.

4. Commercial Urinal Attributes:a. Standards: ASME A112.19.2/CSA B45.1.b. Material: Vitreous-china.c. Type: Siphon jet.

1) Extended shields.d. Drain: Removable dome strainer with NPS 1-1/2 (DN 40) tailpiece; chrome-

plated.e. Strainer or Trap-way: With integral trap.f. Water Consumption:

1) 0.125 gal (0.47 L) per flush.2) 0.5 gal (1.9 L) per flush.3) 1.0 gal (3.8 L) per flush.

g. Spud Size and Location: NPS 3/4 (DN 20);1) Back.2) Top.

h. Outlet Size and Location: NPS 2 (DN 50); back.i. Color: White.

5. Mounting Fixture:a. Model Z1221 - Plate Type System wall urinal.b. Model Z1222 - Plate Type system with bearing plate.

2.12 WATERLESS URINALS

A. Wall hung, back outlet, waterless, vitreous china, designed for liquid-trap-seal operation:1. Basis-of-Design: Zurn Industries, LLC: Model Z5795.2. Waterless Urinal attributes:

a. Standard: ASME A112.19.2/CSA B45.1, without water.b. Trap-Seal Method: Liquid seal.c. Outlet Size: Flange, NPS 2 (DN 50).

1) Location: Back.d. Trap-Sealing Liquid: Proprietary.e. Color: White.

3. Waste Fitting:a. Standard: ASME A112.18.2/CSA B125.2.b. Size: NPS 2 (DN 50).

4. Mounting Fixture:a. Model Z1221 - Plate Type System wall urinal.b. Model Z1222 - Plate Type system with bearing plate.

2.13 COMMERCIAL SHOWERS

22 40 00-15

A. Institutional Wall-Mounted Shower.1. Basis-of-Design: Zurn Industries, LLC; Z7500.2. Prefabricated Stainless-steel, wall-mounted, surface-enclosure shower fixture with

individual nozzle.3. Standards:

a. ASME A112.18.1/CSA B125.1.b. ASSE 1016 / ASME A112.1016 / CSA B125.16.

4. Number of Shower Nozzles: One.5. Height to Nozzles:

a. Model 66 inches (1675 mm).b. Model 72 inches (1830 mm).

6. Mixing valve with hot and cold water operation:a. Thermostatic.

7. Control: Thermostatic mixing valve with individual, tempered-water supply and hand lever operation.

8. Flow Control: Per shower head:a. 1.25 gpm (4.7 L/m).b. 1.5 gpm (5.7 L/m).c. 1.75 gpm (6.62L/m).d. 2 gpm (7.6 L/min.).e. 2.5 gpm (9.5 L/min.).

9. Soap Dish: Per shower head.10. Supplies:

a. Copper tubing: Model NPS 1/2 (DN 15).11. Shroud: Stainless steel of size to cover supplies and vent piping.

a. Vertical extension.b. Horizontal extension.

12. Drain Fitting Outlet:a. Model NPS 3 (DN 80).b. Model NPS 4 (DN 100).c. Vent at column base:

1) NPS 2 (DN 50)

2.14 COMMERCIAL LAVATORY FAUCETS

A. Sold Brass Manual Lavatory Faucets:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Single control mixing Z810-XL Series.b. Model Single control mixing Z822-XL Series.c. Single control mixing Z824-XL Series.d. Model Z811-XL Series 4 inch (102 mm) Centerset Quarter Turn Faucets.e. Model Z812-XL Series 4 inch (102 mm) Centerset Quarter Turn Faucets.f. Model Single Basin Z827-XL Series.g. Model Metering Faucet Z861-XL Series.h. Model Metering Faucet Z863-XL Series.i. Model Metering Faucet Z865-XL Series.j. Model Metering Faucet Z866-XL Series.k. Model Metering Faucet Z867-XL Series.

B. Solid Brass, Automatic Lavatory Faucets: electronic-sensor-operated:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z6950-XL (automatic-type, battery-powered).b. Model Z6930-XL (automatic-type, battery-powered).c. Model Z6913-XL (automatic-type, battery-powered).d. Model Z6915-XL (automatic-type, battery powered).e. Model Z6920-XL (automatic-type, battery-powered).

22 40 00-16

f. Model Z6930-XL-CWB (automatic-type, hard-wired).g. Model Z6913-XL-CWB (automatic-type, hard-wired).h. Model Z6915-XL-CWB (automatic-type, hard-wired).i. Model Z6918-XL (automatic-type, battery-powered).j. Model Z6918-XL-ADM (automatic-type, battery-powered).k. Model Z6920-XL (automatic-type, hard-wired).

2. Standard:a. ASME A112.18.1/CSA B125.1.b. NSF/ANSI 61.

3. General: Indicators: Hot- and cold-water.4. Body: Commercial, solid brass.

a. 4 inch (102 mm) Centerset.b. 8 inch (203 mm) Centerset.c. Widespread.d. Single hole.

5. Finish: Polished chrome plate.6. Maximum Flow Rate:

a. 0.35 gpm (0.95 L/min).b. 0.5 gpm (1.5 L/m).c. 1.0 gpm (3.8 L/m).d. 1.5 gpm (5.7 L/m).e. 2.2 gpm (8.3 L/m).

7. Mounting Type:a. Deck, exposed.b. Deck, concealed.c. Back/wall, exposed.d. Back/wall, concealed.

8. Valve Handle(s):a. Single lever.b. Lever Handles, 2-1/2 inches (63.5 mm).c. Cross, four arm.d. Wrist blade, 4 inches (102 mm).e. Elbow, 6 inches (152 mm)f. Push button.

9. Spout Type:a. Rigid.b. Swing.c. Rigid, gooseneck.d. Swivel, gooseneck.

10. Spout Outlet:a. Aerator.b. Laminar flow.c. Spray.

11. Operation:a. Quarter-Turn Heavy Duty Ceramic.b. Single Control Ceramic Cartridge.c. Drain: Model Not part of faucet.

C. Brass, Laminar-Flow, Commercial Faucet-Spout Outlets:1. Basis-of-Design: Zurn Industries, LLC:

a. Model AquaSense 20J.b. Model AquaSense 20K.c. Model AquaSpec -4 faucet suffix.d. Model AquaSpec -14 faucet suffix.e. Model AquaSpec -18 faucet suffix.f. Model AquaSpec -19 faucet suffix.

22 40 00-17

g. Model AquaSpec -21 faucet suffix.h. Model AquaSpec -22 faucet suffix.

2. Standards:a. ASME A112.18.1/CSA B125.1.b. NSF/ANSI 61.

3. Non-aerating, laminar stream.4. For attachment to faucet outlets: External or internal thread.5. Flow-rate range within flow-rate of faucet.6. Finish: Chrome-plated.

2.15 SINK FAUCETS

A. Manual Type Mixing Valve: Commercial, Solid-Brass Faucets:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z810-XL Series.b. Model Z811-XL Series.c. Model Z812-XL Series.d. Model Z831-XL Series.e. Model Z812-XL-TWM.f. Model Z825-XL.g. Model Z827-XL.h. Model Z831-XL.i. Model Z871-XL-TWM.j. Model Z841-XL Series.k. Model Z842-XL Series.l. Model Z843-XL Series.

2. Standards:a. ASME A112.18.1/CSA B125.1b. NSF/ANSI 61.

3. Include hot- and cold-water indicators; coordinate faucet inlets with supplies and fixture hole punchings; coordinate outlet with spout and sink receptor.

4. Body Type:a. 4 inch (203 mm) Centerset.b. Widespread.c. Single hole.

5. Body Material: Solid brass.6. Finish:

a. Chrome plated.b. Rough Chrome.c. Polished Chrome.

7. Maximum Flow Rate:a. 0.35 gpm (1.3 L/m).b. 0.5 gpm (1.9 L/m).c. 1.0 gpm (3.8 L/m).d. 1.5 gpm (5.7 L/m).e. 2.2 gpm (8.3 L/m).f. 2.5 gpm (9.5 L/m).

8. Handle(s):a. Lever handles, 2-1/2 inches (63.5 mm).b. Cross, four arm.c. Wrist blade, 4 inches (102 mm).d. Elbow, 6 inches (152 mm).e. Push Button.f. Foot pedal.g. Knee action.

9. Mounting Type:

22 40 00-18

a. Deck, concealed.b. Deck, exposed.c. Back/wall, exposed.

10. Spout Type:a. Low profile.b. Rigid, solid brass.c. Rigid, solid brass with wall brace.d. Swing, round tubular.e. Swing, shaped tube.f. Swing, solid brass.g. Rigid gooseneck.h. Swivel gooseneck.

11. Operation: Quarter Turn Heavy Duty Ceramic.12. Vacuum Breaker: For hose outlet.13. Spout Outlet:

a. Aerator.b. Laminar flow.c. Hose thread according to ASME B1.20.7.d. Plain end.e. Spray.

14. Supply Fittings: Zurn - Model Z8808-XL.15. Waste Fittings: Zurn.

a. Model Z8746 Series.b. Model Z8743 Series.c. Model Z8746 Series.

2.16 COMMERCIAL AND RESIDENTIAL SHOWER FAUCETS

A. Commercial Shower Faucets:1. Basis-of-Design: Zurn Industries, LLC:

a. Model TempGard 1.b. Model TempGard 3.c. Model Z7100 Series.d. Model Z7300 Series.

2. Single-handle, pressure-balance mixing valve with hot- and cold-water indicators; check stops; and shower head.

3. Faucet Attributes:a. Standards:

1) ASME A112.18.1/CSA B125.1.2) ASSE 1016 / ASME A112.16 / CSA B125.16.

b. Body Material: Solid brass.c. Finish: Polished chrome plate.d. Maximum Flow Rate: 2.5 gpm (9.5 L/min.) unless otherwise indicated.e. Mounting:

1) Concealed.2) Exposed.

f. Operation: Single-handle control.1) Push-pull.2) Twist or rotate.

g. Antiscald Device:1) Integral with mixing valve.2) Separate unit.

h. Check Valve Stops: Integral or attached.1) Hot and cold supply.

4. Supply Connections: NPS 1/2 (DN 15).5. Shower Head: Zurn, Model Z7000 Series.

22 40 00-19

a. S1.b. S5.c. S6.d. S7.e. S8.f. S9.g. S10.h. Shower Head Attributes:

1) Standard: ASME A112.18.1/CSA B125.1.2) Type:

a) Ball joint with arm and flange.b) Without ball joint, but with arm and flange.c) Ball joint and head integral with mounting flange.d) Integral with mounting flange.

3) Shower Head Material:a) Metallic with chrome-plated finish.b) ABS Plastic with chrome-plated finish.

4) Spray Pattern:a) Adjustable.b) Fixed.

5) Integral Volume Control.6) Shower-Arm, Flow-Control Fitting:

a) 1.5 gpm (5.7 L/m).b) 2.0 gpm (7.6 L/m).

7) Temperature Indicator: Integral with faucet.

2.17 BEDPAN WASHERS

A. Bedpan Washers: Wall-Mounted:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z873 Series.b. Model Z877 Series.

2. Basis-of-Design: Zurn Industries, LLC:a. Model Z851 Series.b. Model Z855 Series.

3. Bedpan Washer Attributes:a. Standard: ASME A112.18.1/CSA B125.1.

1) Hose Assembly: Rubber or vinyl hose, self-closing, hand-held spray nozzle, wall bracket, and hook; hose length to be 48 inch (1220 mm).

b. Vacuum Breaker: ASSE 1001, atmospheric, wall mounted.c. Shutoff Valve: Wall-mounted, upstream of vacuum breaker.d. Connecting Piping: Concealed.e. Finish: Polished chrome-plated finish on exposed metal parts.f. Supply Connection: NPS 1/2 (DN 15).g. Control Mounting:

1) Floor.2) Wall.3) Single-pedal.4) Double-pedal, hot- and cold-water.

2.18 FAUCET SUPPLY FITTINGS

A. Basis-of-Design: Zurn Industries, LLC;1. Model Z8808-XL.2. Standard:

a. ASME A112.18.1/CSA B125.1.

22 40 00-20

b. NSF 61.3. Supply Piping: Chrome-plated brass pipe or chrome-plated copper tube matching

water-supply piping size. Include chrome-plated brass or stainless-steel wall flange.4. Supply Stops: Chrome-plated brass, one-quarter-turn, ball-type or compression valve

with inlet connection matching supply piping.5. Operation:

a. Loose-key.b. Wheel-handle.

6. Risers:a. NPS 3/8 (DN 10).b. NPS 1/2 (DN 15).c. Material:

1) Chrome-plate, rigid copper pipe.2) Chrome-plated, soft-copper flexible tube.3) ASME A112.18.6 / CSA B125.6, braided- or corrugated-stainless-steel

flexible hose.

2.19 SINK AND LAVATORY WASTE FITTINGS

A. Basis-of-Design: Zurn Industries, LLC: Drain:1. Model Z8746 Series Grid type with NPS 1-1/2 (DN 40) offset.2. Model Z8743 Series.3. Model Z8746 Series.

B. Standard: ASME A112.18.2/CSA B125.2.

C. Trap: Two-piece trap and swivel elbow and wall flange.1. Size: NPS 1-1/2 (DN 40).2. Stainless steel.3. Chrome plated brass.

2.20 URINAL FLUSHOMETER VALVES

A. Lever-Handle, Diaphragm Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z6003AV-ULF, 0.125 gal (0.47 L) per flush.b. Model Z6003AV-EWS, 0.5 gal (1.9 L) per flush.c. Model Z6003AV-WS1, 1.0 gal (3.8 L) per flush.

B. Solenoid-Actuator, Diaphragm Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. ModelZR6003AV-WS1, 1.0 gal (3.8 L) per flush.

C. Hydraulic-Actuator, Push-Button, Diaphragm Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model ZH6002AV-ULF, 0.125 gal (0.47 L) per flush.b. Model ZH6003AV-EWS, 0.5 gal (1.9 L) per flush.c. Model ZH6003AV-WS1, 1.0 gal (3.8 L) per flush.

D. Lever-Handle, Piston Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model MetroFlush Z6200-WS1, 1.0 gal (3.8 L) per flush.b. Model MetroFlush Z6200-EWS, 0.5 gal (1.9 L) per flush.

E. Hard-Wired, Solenoid-Actuator, Piston Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model ZEMS6203-EWS, 0.5 gal (1.9 L) per flush.

22 40 00-21

F. Battery-Powered, Solenoid-Actuator, Piston Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model ZTR6203-ULF, 0.125 gal (0.5 L) per flush.b. Model ZTR6203-EWS, 0.5 gal (1.9 L) per flush.c. Model ZTR6203-WS1, 1.0 gal (3.8 L) per flush.

2. Urinal Flushomatic Attributes:a. Standard: ASSE 1037/ASME A112.37/CSA B125.37.b. Maximum Pressure Rating: 125 psig (860 kPa).c. Features: Include integral check stop and backflow-prevention device.d. Material: Brass body with corrosion-resistant components.e. Exposed Flushometer-Valve Finish: Chrome plated.f. Panel Finish: Chrome plated or stainless steel.g. Style:

1) Exposed.2) Concealed.

h. Consumption: Per flush.1) 0.125 gal. (0.47 L).2) 0.5 gal. (1.9 L).3) 1.0 gal. (3.8 L.

i. Minimum Inlet:1) NPS 3/4 (DN 20).2) NPS 1 (DN 25).

j. Minimum Outlet:1) NPS 3/4 (DN 20).2) NPS 1-1/4 (DN 32).

2.21 WATER CLOSET FLUSHOMETER VALVES

A. Lever-Handle, Diaphragm Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z6000AV-WS1, 1.6 gal (6 L) per flush volume.b. Model Z6000AV-HET, 1.28 gal (4.8 L) per flush volume:

B. Solenoid-Actuator, Diaphragm Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model ZR6000AV-WSI, 1.6 gal (6 L) per flush.b. Model ZR6000AV-WS1-DF, 1.6/1.1 gal (6/4.125 L) per flush.

C. Hydraulic-Actuator, Push-Button, Diaphragm Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model ZH6000AV-HET, 1.28 gal (4.8 L) per flush.b. Model ZH6000AV-WS1, 1.6 gal (6 L) per flush.

D. Lever-Handle, Push-Button, Diaphragm Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model ZP6800 Series; electronic push button actuator.b. Model ZH6600 Series; hydraulic push button actuator.c. Model Z6600 Series.d. Model ZEMS6000 AV Series; electronic actuator.

E. Lever-Handle, Piston Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z6200-WS1, 1.6 gal (6 L) per flush.b. Model Z6200-HET, 1.28 gal (4.8 L) per flush.

F. Hard-Wired, Solenoid-Actuator, Piston Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC: Model ZEMS6200.

22 40 00-22

G. Battery-Powered, Solenoid-Actuator, Piston Flushometer Valves:1. Basis-of-Design: Zurn Industries, LLC:

a. Model ZTR6200EV-ONE, 1.1 gal (4.2 L) per flushb. Model ZTR6200EV, 1.28 gal (4.8 L) per flush.c. Model ZTR6200EV-LL, 1.28 gal (4.8 L) per flush.d. Model ZTR6200-WS1, 1.6 gal (6 L) per flush.e. Model ZTR6200-WS1-LL, 1.6 gal (6 L) per flush.f. Water Closet Flushometer Attributes:

1) Standard: ASSE 1037/ASME A112.37/CSA B125.37.2) Maximum Pressure Rating: 125 psig (860 kPa).3) Features: Include integral check stop and backflow-prevention device.4) Material: Brass body with corrosion-resistant components.5) Exposed Flushometer-Valve Finish: Chrome plated.6) Panel Finish: Chrome plated or stainless steel.7) Style:

a) Exposed.b) Concealed.

8) Consumption: Per flush.a) 1.6 gal. (6 L).b) 1.28 gal. (4.8 L).c) 1.1 gal. (4.2 L).

9) Minimum Inlet: NPS 1 (DN 25).10) Minimum Outlet: NPS 1-1/4 (DN 32).

2.22 WATER CLOSET WASTE CARRIERS

A. High Performance, Adjustable Siphon Jet Water Closet Carriers:1. Basis-of-Design: Zurn Industries, LLC:

a. Horizontal Waste Fitting:1) Model Z1201-NL3.2) Model Z1201-NR3.3) Model Z1201-ND3.4) Model Z1201-NL4.5) Model Z1201-NR4.6) Model Z1201-ND4.7) Model Z1201-HL4.8) Model Z1201-HR4.9) Model Z1201-HD4.


B. Bariatric, Adjustable Siphon Jet Water Closet Carriers:1. Basis-of-Design: Zurn Industries, LLC:

a. Horizontal Waste Fitting:1) Model Z1203-N-XH.

22 40 00-23

2) Model Z1203-N-XB.b. Vertical Waste Fitting:

1) Model Z1204-N-XH.2) Model Z1204-N-XB.

C. Standard, Adjustable Blowout Style Water Closet Carriers:1. Basis-of-Design: Zurn Industries, LLC:

a. Horizontal Waste Fitting:1) Model Z1203-N.2) Model Z1203-N-XH.3) Model Z1203-N-XB.


c. Water Closet Waste Carrier Attributes:1) Standard: ASME A112.6.1M.2) Load Rating:

a) H = 300 lbs (227 kg).b) N = 300 lbs (136 kg).c) XH = 750 lbs (340 kg).d) XB = 1,000 lbs (454 kg).

3) Waste-fitting to match drainage piping material and arrangement. Couplings gaskets, faceplate, and feet; Hardware to match fixture.a) Wide space installation: Extension coupling.

4) Connection Type:a) No-Hub "N".b) Hub and Spigot "H".

5) Flow Direction:a) Right "R".b) Left "L".c) Double "D".

6) Waste Pipe Diameter:a) 3 in (76 mm).b) 4 in (102 mm).

7) Faceplate: B (blowout style faceplate).8) Water Consumption: Per flush.

a) 1.1 gal (4.2 L).b) 1.28 gal (4.8 L)c) 1.6 gal (6 L).

9) Water-Closet Mounting Height:a) Standard.b) Child.c) Handicapped/elderly according to ICC A117.1.

10) Coupling/Waste Orifice Diameter: 3 in (76 mm).11) Foot Type:

a) Universal (standard or pre-fab installations).b) Bariatric.

12) Material: Cast Iron.

2.23 SUPPORT FIXTURES

A. Lavatory, Support Fixtures:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z1224 - Plate Type System; Lavatory Back Carrier.1) Lavatory support system with top support plate.

22 40 00-24

2) Dura-Coated rectangular steel uprights with welded feet.3) Adjustable support plate., and mounting fasteners.

b. Model Z1231 - Concealed Arm System, with Alignment Truss Carrier.1) Lavatory support system with concealed arms.2) Dura-Coated rectangular steel uprights with welded feet.3) Cast iron adjustable headers, concealed arms, steel sleeves, alignment

truss, and mounting fasteners.c. Model Z1231-EZ - Concealed Arm System with Adjusting Bars Carrier.

1) Lavatory support system with concealed arms.2) Dura-Coated rectangular steel uprights with welded feet.3) Cast iron adjustable headers, concealed arms, steel sleeves, adjusting

bars, and mounting fasteners.d. Model Z1231-EZR - Concealed Arm System with Adjustable Uprights and

Header Plates.1) Wall Hung Lavatory Support System.2) Dura-Coated upright supports; structural carbon-steel square tubing.3) Welded steel plate mounting feet with separate bolt patterns:4) Anchors complying with OSHPD spacing requirements.

a) 3/8 inch (10 mm).b) 1/2inch (13 mm).

5) Lower and upper EZ-installation plates, marked with an indexed ruler guide;a) Accurate adjustability, upright spacing, from 15 inch (381 mm) to

22 inch (560 mm).6) Individual slotted header plates with integral welded arm sleeves.

a) Provides 2 inch (51 mm) additional horizontal adjustment per plate.

b) Total horizontal adjustment range is 11 inches (279 mm) to 26 inches (660 mm).

7) Arms: Dura-Coated cast iron with leveling screws and elastomeric locking devices.

8) Factory assembled: Uprights, EZ-installation plates, and header plates.9) Complies with ASME Standard A112.6.1M at any adjustment position.

e. Model Z1236 - Exposed Arm System Carrier.1) Lavatory support system with exposed arms.2) Dura-Coated rectangular steel uprights with welded feet.3) Cast iron adjustable headers, acid resistant epoxy coated cast iron arms,

alignment truss, and mounting fasteners.

B. Urinal Support Fixtures:1. Basis-of-Design: Zurn Industries, LLC:

a. Model Z1221 - Plate Type Systems wall urinal.1) Dura-Coated rectangular steel uprights, welded feet, adjustable support

plate, and mounting fasteners.b. Model Z1222 - Plate Type system with bearing plate.

1) Dura-Coated carbon structural steel rectangular tubing uprights.2) Welded base feet, slotted floor anchor holes.3) Lower bearing plate, vertically adjustable to accommodate bearing jack

placement.4) Upper Universal hanger plate, pre-notched for back spud inlet.

a) Designed for various hardware positions and fixtures.b) Includes mounting fasteners and hardware.c) Carrier system exceeds load and deflection requirements as

outlined in ASME Standard A112.6.1M.

PART 3 EXECUTION

22 40 00-25

3.1 EXAMINATION

A. Verification of Conditions: Examine areas and conditions under which Work is to be performed and identify conditions that may be detrimental to proper or timely completion.1. Rough-in for water-supply, sanitary drainage and vent piping systems: Verify

locations; pipe and connection.2. Walls and partitions: Suitable thickness.

B. Fixture and Valve Interiors: Clean and free of foreign matter, and corrosion. Remove packing used to prevent disc movement.1. Operate valves from fully open to fully closed positions.2. Verify guides and seats are clean and free of foreign matter, and corrosion.

C. Threads on Valves Fittings and Fixtures: Inspect valve and mating pipe for form and cleanliness.

D. Mating Flange Faces: Inspect for conditions that may cause leaking.1. Bolting: Proper size, length, and material.2. Gaskets: Proper size and material composition suitable for application; defect and

damage free.

E. Replace defective fixtures and valves with new.

F. Do not proceed until unsatisfactory conditions have been corrected.

3.2 INSTALLATION

A. All Fixtures: level and plumb.1. For children: install at height required.

B. Attach all support framing to building substrate per manufacturer's written instructions.

C. Wall-mounted fixtures: Install off-the-floor carrier supports. Install accessible, wall-mounted water closets according to ICC/ANSI A117.1.

D. Water-supply piping: Ball or gate shutoff valves on supply to each fixture connected to domestic-water piping. See section 23 05 00 - Common Work Results for HVAC "Common Work Results for Plumbing Piping."1. Locations: easily accessible.

E. Fixture drain outlets: Install trap and waste piping to be connected to sanitary drainage system.

F. Escutcheons and wall flanges: Wall piping penetrations finished locations.

G. Joints between fixtures and walls: Seal with silicone sealant:1. Sanitary, one-part, mildew-resistant. Match colors.

H. Flushometers:1. Water-supply fitting on supply to water closet.2. Supply piping: Attach to supports or substrate in space behind fixture.3. Accessible water closets: Handle on lever-handle flushometer to be mounted on open

side of water closet. Be sure actuators accessible to with disabilities.4. Fresh batteries in battery-powered, electronic-sensor mechanisms.

3.3 FIELD QUALITY CONTROL

A. Test and inspect per authorities having jurisdiction.

22 40 00-26

B. Piping Tests: prior to covering and after curing and setting of concrete thrust blocks. Fill and pressurize pipeline to test pressure a minimum of 24 hours before testing.1. Use potable water.

C. Hydrostatic Tests:1. Test Pressure: One-and-one-half times the working pressure for two hours.

a. Increase pressure at increments of 50-psig (350-kPa).1) Inspect joints.

b. Maintain test pressure for one hour, minimum.c. Decrease test pressure to zero psig (zero kPa).d. Increase pressure at increments of 50-psig (350-kPa).

1) Inspect joints.e. Maintain test pressure for one hour, minimum.f. Allowable leakage: 2 quarts (1.89 L) per hour per 100 joints.

2. Remake leaking joints with new materials and repeat test until leakage is within allowed limits.

D. Prepare test and inspection reports.

3.4 IDENTIFICATION

A. Comply with requirements for identification specified in Section 23 05 53 - Identification for HVAC Piping and Equipment "Identification for Plumbing Piping Systems."

B. Comply with requirements for identification specified in Section - "Identification for Electrical Systems."

3.5 ADJUSTING

A. Flow regulators: Proper flow of water through fixtures.

B. Flushometer valves: Adjust water pressure.

C. Replace damaged fixtures, fittings, and controls

3.6 CLEANING

A. Remove paint spots, dirt, and debris. Damaged finish to match original finish.

B. Clean fixtures, according to manufacturer's written instructions.

C. Provide protective covering for installed fixtures.

D. Not to be uses for temporary facilities without written approval by Owner.

END OF SECTION

22 40 00-27

· web viewasme a112.19.3/csa b45.4 - stainless steel plumbing fixtures (designed for residential...

Documents