730Multi-functional Ink-jet Printer

Instruction manual

Overview

This model printer is portable handheld inkjet printer. It has the advantage of convenient carrying and stable

performance. It equip quick-drying ink cartridge and rechargeable lithium battery. The battery is located at

the tail of the handle.Direct editing on the 4.3-inch touch color screen. The machine can swith Simplified

Chinese, Traditional Chinese and English with one click. The printer comes with storage function, support U

disk storage

Points for attention

Installation attention★

1. Ensure that the cartridge is inserted at a 45-degree angle. Do not use brute force to avoid damage to

metal stylus

2. If there is too much dust in the working environment, it is strongly recommended to use an air

compressor to remove internal dust.

3. Insert and remove the ink cartridge must be under turn off the machine state

4. If you do not use the machine for more than 5 minutes, you must remove the ink cartridge from the

machine and use the buckle card.

Operational attention★

1. If there is no operation, please turn on the screen saver function of the printer to ensure the battery's

longer life.

2. When the printing effect is blurred, please confirm the printing distance of the nozzle and the object to

be within 5mm.

3. When ink tailing occurs in the printing, please wipe the nozzle gently with a special wiping paper.

4. If the environment dust is a lot, please use air pressure guns to clean the dust.

5. Please contact the agent if there is an unsolvable problem by yourself.

Common problem solving(no word/blurry)

1. Please check if the ink cartridge has ink and whether the ink cartridge is installed.

2. Reprint the document.

3. Whether the power is full, charging and then print

4. Look at the surface of the nozzle. If there are any debris, please wipe it gently.

5. Check if the parameters are correct.

Product parameters

Machine Name Portable inkjet coder

Machine weight 0.89kg

Machine Size (L*W*H) 210*120*90mm

Printing Height 4-12.5mm

Printed FontsHigh-definition print fonts,dot matrix fonts, built-in multiple

Chinese and English fonts

Printing graphicsCan print a variety of trademark patterns,graphics can be

imported through a USB flash drive

Printing Accuracy 600DPI(high definition)

Printing Barcode Barcode ;QR code

Printing Line 1-6 Lines adjustable(recommended in three lines)

Serial Number 1-9 variable serial number

Printing Distancer2-5mm(the distance between the nozzle and the object to be

printed)

Automatic Printing Date,Time,Serial Number, etc.(can vary with the time of day)

Storage Information Body Storage

Ink Color Black

Power Parameters 16.8V rechargeable lithium battery

Control Panel 4.3 inch Touch color screen

Printing SpeedUp to 50m/min (continuous printing)printing speed does not

change due to the increase in the number of lines

System Power ConsumptionAverage power consumption is less than 5W.

Operation temperature:0℃~38℃ Humidity:10%~80%

Ink type Quick-drying ink cartridge

External Interface USB, Photoelectric interface

Printing MaterialWood Board, Carton,Food Bag, Stainless Steel,Stone, MDF,

light Steel Keel, Pipe Metal, Plastic, Aluminum Foil, etc.,

Main interface

1.Main interface: Show basic operation and preview of file effect, display file size with ruler

2.【24txt】: file name, file name being printed

3. 【Printing Times: 000000201】: Record the number of times the device prints,click to enter the counter

setting page.

4. : Screen saver, click to close the screen, when you want to print,you can click on the screen at will Can

be activated to save the electricity.

5. :Print button, After clicking, it will be display blue, then we can print.

(the interface color is random, actual make the object as the standard)

6.【File Edit】: Click to edit the new file.

7.【File Selection】: Click to select the internal file saved in the machine.

8.【Import data】: Can use u disk import. data

9. 【Setting Page】: Set the machine printing parameters and conventionalcontrol methods.

Edit page