we provide exceptional quality project management, multi ... · to comply with malaysian law of...

QMEC Company Profile 1

We provide exceptional Quality project Management, multi disciplinary Engineering design and Construction consultancy


INTRODUCTION &BACKGROUND

3

COOPORATEINFORMATION

4

SCOPE OF SERVICES 5

ORGANIZATIONCHART

11

PROJECTEXPERIENCES

12

PRINCIPAL RESUME 14

BEM CERTIFICATE 20

QMEC Consult Sdn Bhd. (QMEC) is formed in 2011 to provide a wide spectrumof engineering design services to the public and private sectors especially in oil& gas and petrochemical industries.

QMEC provides services primarily in the following areas:

1) Project management and planning

2) Feasibility studies

3) Basic engineering design

4) Detailed engineering design

5) Design safety review

6) Cost estimation

7) Tender preparation and documentation

8) Construction management and supervision.

9) Safety and environmental management

10) Drafting Services

11) Engineering and/or Corporate Information Management (DocumentControl Management)

12) Authority Approvals

Our Head Office is located at K 8813-E2, Level 1, Bangunan MPK, 24300,Kerteh, Kemaman. We also have a satellite office in Kuala Terengganu.

Our resources enable us to provide complete engineering services for small tomedium-sized projects from conceptual / feasibility studies, planning, budgetpreparation, detailed design and drafting, management of construction andcommissioning support.

Where necessary, we are also able to provide further resources on the followingcapabilities through association with specialist firms, which will be integratedinto our project team:

Acoustic induced vibration study

Noise study

Architectural design

Safety Reviews, audits and training

Risks based inspection



Company Name:

Company No:

QMEC Consult Sdn Bhd.

952590-D

Contact persons: 1) Ir. Hj. Rosdan Bin Ismail (ManagingDirector)

2) Ir. Wan Mohd Hazairin Bin Wan Daud(Executive Director)

Business Address: K 8813-E2, Level 1Bangunan MPK,24300, Kerteh, Kemaman,Terengganu, Malaysia.

Telephone No : Tel : +609 826 1234Fax : +609 826 1234

Emails : 1) [email protected]) [email protected]

Website www.qmec.com.my

Date ofIncorporation

July 2011

Authorizedcapital

RM 100,000.00

Paid-up Capital RM 51,000.00

Equity Ownership 100% Bumiputra

Bankers Maybank Islamic

CompanySecretary

MCM Corporate Services Sdn Bhd

Auditor

QMEC has the capability to provide exceptional services which includethe following disciplines but not limited to:

◦ 1) Mechanical Building Services Engineering

◦ 2) Piping and Process Engineering

◦ 3) Civil and Structural Engineering

◦ 4) Electrical and Instrumentation Engineering

◦ 5) Construction Management and Supervision


Mechanical building services account for around 30% of the capital and 50% ofthe operating cost for a typical office, and substantially more in highly servicedbuildings such as hospitals. We play a central role in creating comfort, safe andlow operating and maintenance cost of the buildings by employing best andlatest technology solutions

QMEC primary service areas includes:

Heating, Ventilation and Air Conditional system

Fire Fighting System,

Fire Detection and Alarm system

Plumbing and Sanitary System

Sewerage system


Piping and process transfer modification/ change is basic need forpetrochemical plant for its improvement and sustainability.

Good industry practice require all process and plant modification shall beundertaken by competent and experience personnel to ensure plant andhuman safety are well safeguarded

Our wide experience in oil and gas industries in the following areas willhelp client for their modification project executed safe and successfully.

Technical and purchase specification of rotating equipment, vessels,pumps, heat exchangers, piping systems for offshore, oil and gasfacilities and onshore petrochemical plant.

Piping stress analysis (Static & Dynamic) using CAESAR II

Conceptual studies and Basic Engineering Design.

Detailed piping and pipe support engineering design.

3D piping modeling using CADWorx.

Hydraulic study (Line Sizing and Pump Sizing)

Tender document for procurement and construction contractor

Bid tabulation and evaluation support.

Project management and construction / installation supervision

Material take-off exercise

Cost estimation

Liaison with manufacturer and vendors assessment.

Fire risk assessment and fire fighting system modification.


Civil and structural engineering is a basic discipline where allprojects require civil engineer(s) to deal with the infrastructuresdesign, construction and to compliment other engineering workin plant modification project.

Our expertise in this area include s:

Structural Engineering particularly to support architectsand/or clients.

Public health engineering such as drainage, sewerage andwater supply.

Public work engineering such as roads, bridges, and marinefacilities.

Technical management advisor to developers or contractorfor residential, commercial and industrial project.

Project management, planning and constructionsupervision.

Feasibility study and site investigation.

Geotechnical and foundation design.

Detailed structural engineering.

Civil and infrastructure engineering design.

Contract preparation and tender appraisal.

Contract administration

Drafting services


Our primary electrical services includes:

Electrical system studies

Equipment sizing & calculation

Equipment specification & datasheets

Cable Sizing

AC & DC UPS Sizing

Lighting Illumination Level

Equipment Heat Loss

Electrical system inspection and certification

Our primary instrumentation services includes:

Basic Engineering/Conceptual Design

Detailed Engineering

Instrument Design Basis

Process Control Strategies

Fire and Gas Detection Philosophies

Telecommunication Philosophies

Power Consumption Requirements

Instrument Schedule

Instrument Utility Requirement

Layout of Instrument

Control Basis & Interlock Diagram

Instrument Cable & Duct Routing

Panel Instrument Arrangement

Instrument Piping Hook-Up & Loop-Up

Wiring, Tubing & Utility Piping Layout

Instrument Bill of Quantity

Instrument Requisition

Review & Check Vendor Drawing


To comply with Malaysian LAW of UBBL 1984, part 11 clause 5:

We do have qualified persons (professional engineers) in all disciplines to manageand supervise your project for a successful completion.


MANAGING

DIRECTOR

PIPING &

MECHANICAL

Senior

Engineer

Engineer

Designer

ELECTRICAL&

INSTRUMENT

Senior

Engineer

Engineer

Designer

CIVIL &

STRUCTURE

Senior

Engineer

Engineer

Designer

PROCESS

Senior

Engineer

Engineer

Designer

EXECUTIVE

DIRECTOR


PROJECT CLIENT VALUE

Engineering For Control RoomExtension

MMC RM165K

Provision of Engineering Design c/wCalculation, Drawings, PE endorsementand Authority Approval

Polyplastic Asia RM4.5K

Provisional of Mechanical EngineeringServices

MMC RM250Kp.a

Provisional of Electrical EngineeringServices

MMC RM250Kp.a

Detail Engineering Design for WasteWater Plant Modification

UBF RM94K

Provision Work For Tank D-977 asBuilting Work

Dialog RM21K

PE Endorsement for Skid Installation atT-COT

Dermaga O&G RM17K

Engineering Services & PE Endorsement Safarida Jaya RM1.6K

Engineering Services of Fast Loop AutoSampling System Structure

Dermaga O&G RM8.4K

Pipe Stress Analysis Dermaga O&G RM4K

Weight and Dimension EstimationReport

Synergy RM6.8K

As-Built for Larut Modification Baxtech RM4.4K

Structural Analysis of CondensateDrum PE-O-V-506 Replacement.

Dialog RM30K

Engineering Design for Instrument AirVessel

MIE RM9K

Upgrading Bunkering System for ASBLabuan

MIE RM49K



PROJECT CLIENT VALUE

Proposal for CCC Application forChemical Storage, Marine Hose Shed,Central Registry

MMC RM111K

Additional cost for Bunkering SystemAt ASB Labuan - Piping

MIE RM15K

Note: The detail project experience will be made available upon request.

PRESENT POSITION :MECHANICAL & PIPING PRINCIPAL

NAME :Ir. ROSDAN BIN ISMAIL P.Eng. MIEM.

DATE OF BIRTH :13th June 1979

MARITAL STATUS :Married

NATIONALITY :Malaysian

LANGUAGES :Bahasa Malaysia & English

QUALIFICATION :

-Bachelor in Mechanical Engineering from University Kebangsaan Malaysia.

-Familiar in ASME B31.3 Piping Flexibility Analysis.

PROFESSIONAL ASSOCIATION :

-Registered Professional Engineer. BEM no : 14828

-Member of Institute of Engineers Malaysia (MIEM) No: 24223

COMPUTER SKILLS :

CAESAR II, PVELITE, HTRI, TANK, STAAD Pro, Microsoft office, Microsoft Project,AutoCAD and etc

SUMMARY OF EXPERIENCE

Ten (10) years experience as mechanical and piping engineering designwork in petrochemical, oil and gas industry and about two (2) years in structureand process piping fabrication, installation and pre commissioning work inpetrochemical plants.

Directly involved in the Front End Engineering Design, Basic Design andDetail Engineering of various mechanical/equipment and piping work.

The nature of activities includes the preparation of engineeringdeliverables such as technical specifications, technical requisitions, bidevaluation, vendor data review, engineering procedures and design calculations.

Well experienced in piping layout development and pipe stress analysisof process piping. The work includes pipe flexibility and stress check, design ofpipe supports, equipment nozzle check, preparation of stress, displacement,restrains report, design basis, material specification selection and etc. Wellexposed in both onshore and offshore mechanical and piping design projects.

Capable in reviewing and analyzing drawings such as P&ID, EquipmentLayout, GA, pipe support details, Isometric and Piping Plans. Familiar withinternational design codes and standards i.e. ASME, ANSI, API, ASTM, NFPA as wellas customer specific standards like PTS and DEP. Experienced in utilizing designsoftware such as CAESAR II and PVelit for piping and pressure vessel design. I’malso capable in rotation equipment sizing and selection especially for pumps andcompressor.

Working experiences also includes engineering in commercial buildingmechanical services e.g. HVAC design, cold water plumbing system, sanitarysystem, fire fighting system, piping/mechanical specifications, bill of quantity,equipment requisitions, Technical Bid Evaluation/Tabulation, Vendor Data Reviewand construction management and supervision work.


PRESENT POSITION :ELECTRICAL & INSTRUMENT PRINCIPAL

NAME :Ir. WAN MOHD HAZAIRIN WAN DAUD

P.Eng. MIEM.

DATE OF BIRTH :11th Jan 1977




QUALIFICATION :

-Bachelor in Electrical and Electronic Engineering from UniversityMalaysia Sabah.

-Familiar in most electrical international standard e.g. IEC and BS.


-Registered Professional Engineer.

-Member of Institute of Engineers Malaysia (MIEM)


Eleven (11) years experience as electrical andinstrumentation engineering design work in petrochemical, oil andgas industry and about two (2) years in electrical inspection work.

Directly involved in the Front End Engineering Design, BasicDesign and Detail Engineering of various electrical and instrumentwork.

The nature of activities includes the preparation ofengineering deliverables such as technical specifications, technicalrequisitions, bid evaluation, vendor data review, engineeringprocedures and design calculations.

Well experienced in electrical and instrument system. Thework includes identifying customer requirements, designing systems,develop design specifications and technical drawings, researchingsuitable solutions and estimating costs and timescales, liaising withothers in the design team, liaising with clients and contractors,attending meetings on site, designing and conducting tests, servicingand maintaining equipment, preparing tender documentation, writingreports and giving presentations.

Working experiences also includes engineering in commercialbuilding electrical services, electrical inspection, vendor data reviewand construction management and supervision work.


PRESENT POSITION :CIVIL & STRUCTURE PRINCIPAL

NAME :Ir. MOHAMAD YUSRI M. YACOB

P.Eng. MIEM.

DATE OF BIRTH :15th April 1977




QUALIFICATION :

-Bachelor in Civil Engineering from University Sains Malaysia

-Familiar in most civil related international code and standards.


-Registered Professional Engineer. 13440

-Member of Institute of Engineers Malaysia (MIEM)


Eleven (11) years experience as civil and structural engineeringdesign work for commercial buildings. I used to be engineer in-charge formulti million worth project such as terrace houses , shop houses, Marangdistrict police head office, bridges and etc with previous employer namelyPerunding C&S, Technipro Consult Sdn Bhd and Jannacks Consultant Sdn Bhd

Directly involved in tender proposal, engagement of subconsultants, monitoring and coordination of engineering work by in-housestaffs and associates. Familiar with local authority requirement andprocedures for regulation compliance.

The nature of activities includes the preparation of engineeringdeliverables such as technical specifications, technical requisitions,engineering drawings, bill of quantities, bid evaluation, vendor data review,engineering procedures , design calculations and authority approval matters.

I’m also used to be resident engineer to monitor and manageconstruction issues to ensure all constructions work met design specificationand completed within the approved duration. On site, I shall providetechnical advice regarding design, construction, or program modificationsand structural repairs.

In addition to the above I’m responsible to analyze survey reports,maps, drawings, blueprints, aerial photography, and other topographical orgeologic data to plan projects. Plan and design transportation or hydraulicsystems and structures following construction and government standards,

Familiar and hands on with infrastructure software and drawingtools to enable delivery per client expectation.


END(This page is intentionally left blank)


we provide exceptional quality project management, multi ... · to comply with malaysian law of...

Documents