wcb/mcgraw-hill © the mcgraw-hill companies, inc.,1998 thermodynamics Çengel boles third edition...
TRANSCRIPT
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
16CHAPTERCHAPTER
Thermodynamicsof High-Speed
Gas Flow
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
(fig.16-1)
Steady Flow of a Liquid through an Adiabatic DuctSteady Flow of a Liquid through an Adiabatic Duct
16-1
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Three States of a Fluid on an h-s DiagramThree States of a Fluid on an h-s Diagram
16-2
(Fig.16-3)
The actual state, actual stagnation state, and isentropic stagnation state of a fluid on an h-s diagram
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Completely Arresting the Flow of an Ideal Gas can Raise its Temperature Completely Arresting the Flow of an Ideal Gas can Raise its Temperature
16-3
(Fig.16-5)
The temperature of an ideal gas flowing at a velocity V rises by V2/(2CP) when it is brought to a complete stop
STOP
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Propagation of a Small Pressure Wave Along a DuctPropagation of a Small Pressure Wave Along a Duct
16-4
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Control Volume Moving With the Small Pressure Wave Along a DuctControl Volume Moving With the Small Pressure Wave Along a Duct
(Fig. 16-8)
16-5
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
The Velocity of Sound Changes With TemperatureThe Velocity of Sound Changes With Temperature
(Fig. 16-9)
16-6
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
The Mach Number Can Vary With Different Temperatures Even With Equivalent VelocitiesThe Mach Number Can Vary With Different Temperatures Even With Equivalent Velocities
(Fig. 16-10)
16-7
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Throat: The Smallest Flow Area of a NozzleThroat: The Smallest Flow Area of a Nozzle
16-8
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Supersonic Velocities Cannot be Obtained by Attaching a Converging SectionSupersonic Velocities Cannot be Obtained by Attaching a Converging Section
16-9
We cannot obtain supersonic velocities by attaching a a converging section to a converging nozzle. Doing so will only move the sonic cross
section farther downstream
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Variation of Flow Properties in Subsonic and Supersonic Nozzles and DiffusersVariation of Flow Properties in Subsonic and Supersonic Nozzles and Diffusers
(Fig. 16-17)
16-10
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Effect of Back Pressure on the Pressure Distribution Along a Converging NozzleEffect of Back Pressure on the Pressure Distribution Along a Converging Nozzle
(Fig. 16-20)
16-11
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Effect of Back Pressure of a Converging Nozzle on Mass Flow Rate and Exit PressureEffect of Back Pressure of a Converging Nozzle on Mass Flow Rate and Exit Pressure
(Fig. 16-21)
16-12
The effect of back pressure Pb on the mass flow rate m and
the exist pressure Pe of a converging nozzle
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Variation of the Mass Flow Rate Through a Nozzle with Inlet Stagnation PropertiesVariation of the Mass Flow Rate Through a Nozzle with Inlet Stagnation Properties
(Fig. 16-22)
16-13
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
The Effect of Back Pressure on the Flow Through a Converging-Diverging NozzleThe Effect of Back Pressure on the Flow Through a Converging-Diverging Nozzle
(Fig.16-26)
16-14
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
The h-s Diagram for Flow Across a Normal ShockThe h-s Diagram for Flow Across a Normal Shock
(Fig. 16-29)
16-15
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Entropy Change Across the Normal ShockEntropy Change Across the Normal Shock
(Fig. 16-31)
16-16
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Isentropic and Actual (Irreversible) Flow in a Nozzle Isentropic and Actual (Irreversible) Flow in a Nozzle
(Fig. 16-33)
16-17
Isentropic and actual flow in a nozzle between the same inlet state and the exit pressure
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Schematic and h-s Diagram for the Definition of the Diffuser EfficiencySchematic and h-s Diagram for the Definition of the Diffuser Efficiency
(Fig. 16-35)
16-18
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
The h-s Diagram for the Isentropic Expansion of Steam in a NozzleThe h-s Diagram for the Isentropic Expansion of Steam in a Nozzle
(Fig. 16-37)
16-19
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Schematic and h-s Diagram for Example 16-14Schematic and h-s Diagram for Example 16-14
(Fig.16-38)
16-20
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• In this chapter the thermodynamic aspects of high-speed fluid flow are examined. For high-speed flows, it is convenient to combine the enthalpy and the kinetic energy of the fluid into a single term called stagnation (or total) enthalpy h0, defined as
(kJ/kg)
The properties of a fluid at the stagnation state are called stagnation properties and are indicated by the subscript zero.
16-21
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
• The stagnation temperature of an ideal gas with constant specific heats is
which represents the temperature an ideal gas will attain when it is brought to rest adiabatically.
Chapter SummaryChapter Summary16-22
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The (isentropic) stagnation properties of an ideal gas are related to the static properties of the fluid by
16-23
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• When stagnation enthalpies are used, the conservation of energy equation for a single-stream, steady-flow device can be expressed as
where h01 and h02 are the stagnation enthalpies at states 1 and 2, respectively.
16-24
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The velocity at which an infinitesimally small pressure wave travels through a medium is the velocity of sound (or the sonic velocity). It is expressed as
16-25
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• For an ideal gas the velocity of sound becomes
16-26
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The Mach number is the ratio of the actual velocity of the fluid to the velocity of sound at the same state:
16-27
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The flow is called sonic when M = 1, subsonic when M < 1, supersonic when M > 1, hypersonic when M >> 1, and transonic when M 1.=~
16-28
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The nozzles whose flow area decreases in the flow direction are called converging nozzles. Nozzles whose flow area first decreases and then increases are called converging-diverging nozzles. The location of the smallest flow area of a nozzle is called the throat.
16-29
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The highest velocity to which a fluid can be accelerated in a convergent nozzle is the sonic velocity. Accelerating a fluid to supersonic velocities is only possible in converging-diverging nozzles. In all supersonic converging-diverging nozzles, the flow velocity at the throat is the velocity of sound.
16-30
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The ratios of the stagnation to static properties for ideal gases with con-stant specific heats can be expressed in terms of the Mach number as
16-31
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• When M = 1, the resulting static-to-stagnation property ratios for the temperature, pressure, and density are called critical ratios and are denoted by the superscript asterisk:
16-32
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The pressure outside the exit plane of a nozzle is called the back pressure. For all back pressures lower than P*, the pressure at the exit plane of the converging nozzle is equal to P*, the Mach number at the exit plane is unity, and the mass flow rate is the maximum (or choked) flow rate.
16-33
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• Under steady-flow conditions, the mass flow rate through the nozzle is constant and can be expressed as
16-34
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The variation of flow area A through the nozzle relative to the throat area A* for the same mass flow rate and stagnation properties of a particular ideal gas is
16-35
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The parameter M* is defined as the ratio of the local velocity to the velocity of sound at the throat (M = 1):
It can also be expressed as
16-36
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• In some range of back pressure, the fluid that achieved a sonic velocity at the throat of a converging-diverging nozzle and is accelerating to supersonic velocities in the diverging section experiences a normal shock, which causes a sudden rise in pressure and temperature and a sudden drop in velocity to subsonic levels. Flow through the shock is highly irreversible, and thus it cannot be approximated as isentropic.
16-37
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
The properties of an ideal gas with constant specific heats before (subscript x) and after (subscript y) a shock are related by
16-38
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• The entropy change across the shock is obtained by applying the entropy-change equation for an ideal gas across the shock:
16-39
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
• The deviation of actual nozzles from isentropic ones is expressed in terms of the nozzle efficiency N, nozzle velocity coefficient CV, and the coefficient of discharge CD, which are defined as
where h01 is the stagnation enthalpy of the fluid at the nozzle inlet, h2 is the actual enthalpy at the nozzle exit, and h2s is the exit enthalpy under isentropic conditions for the same exit pressure.
Actual kinetic energy at nozzle exit
Kinetic energy at nozzle exit for isentropic flowfrom the same inlet state to the same exit pressure
Actual velocity at nozzle exit
Velocity at nozzle exit for isentropic flowfrom the same inlet state to the same exit pressure
Actual mass flow rate through nozzle
Mass flow rate through nozzle for isentropic flowfrom the same inlet state to the same exit pressure
=
=
=
=
=
Chapter SummaryChapter Summary16-40
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
• The performance of a diffuser is expressed in terms of the diffuser efficiency D the pressure recovery factor FP, and the pressure rise coefficient CPR. They are defined as
Chapter SummaryChapter Summary
Actual stagnation pressure at diffuser exit
Isentropic stagnation pressure
Actual pressure rise
Isentropic pressure rise
=
=
=
=
Fp
Cpr
16-41
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• Steam often deviates considerably from ideal-gas behavior, and no simple property relations are available for it. Thus it is often necessary to use steam tables instead of ideal-gas relations. The critical-pressure ratio of steam is often taken to be 0.546, which corresponds to a specific heat ratio of k = 1.3 for superheated steam.
16-42
WCB/McGraw-Hill © The McGraw-Hill Companies, Inc.,1998
Therm
oTherm
odynam
icsdynam
ics
ÇengelÇengelBolesBoles
Third EditionThird Edition
Chapter SummaryChapter Summary
• At high velocities, steam does not start condensing when it encounters the saturation line, and it exists as a supersaturated substance. Supersaturation states are nonequilibrium (or metastable) states, and care should be exercised in dealing with them.
16-43