____________ _____

_____----------------

------

------

------

------

------

------

------

------

-----

----------------------------------------

------------------------------

----------------------------

™

Redpine Signals WaveComboTM Software Development Kit(SDK) enables users to develop dedicated short range communications (DSRC) applications such as safety, notifications and toll collection along with non-DSRC applications such as Wi-Fi hot spot and Wi-Fi firmware upgrade based on integrated 802.11p, 802.11abgn, Bluetooth Classic, Bluetooth Low Energy and 802.15.4/ZigBee.

Overview

www.redpinesignals.com WaveComboTM

Evaluation of performance of the radioExecution of a set of pre-defined applications (such and Emergency Electronic Brake Lights and Road Side Alert) in field as well as laboratoryDevelopment of DSRC and non-DSRC applications based on 802.11p. 802.11n, Bluetooth, 802.15.4/ZigBeeEnd-to-end testing of the applications (each of the boards can be configured as an OBU or RSU)

This SDK contains all the necessary software and hardware needed for hardware evaluation and development of applications. The kit contains a Freescale i.MX6 processor, WaveCombo module, GPS receiver, dual band antennae with DSRC support, power supply adapters, embedded software(binarycode), WaveCombo software configuration management system, and device drivers. Source code is available for licensing separately. Two sets of hardware boards are provided with the SDK to do a complete end to end development and testing.

The SDK can be used for the following activities:

Wireless Protocols• 802.11p• 802.11abgn• 802.15.4• Bluetooth 4.0 Dual Mode (BT 2.1 + EDR, LE)• SAE J2735• IEEE 1609.x

Supported Operational Modes• 802.11p• 802.11abgn (Access Point, Client, Simultaneous AP/Client)• 802.11abgn + Bluetooth• 80211abgn + 802.15.4/ZigBee• Bluetooth• 802.15.4/ZigBee

Bandwidths• 802.11p: 5 MHz and 10 MHz• 802.11n: 20 MHz and 40 MHz

Operating Frequency Range• Wi-Fi: 2412 MHz to 2484 MHz; 4910 MHz to 5825 MHz• 802.11p: 5850 MHz to 5925 MHz• Bluetooth: 2402 MHz to 2480 MHz• 802.15.4/ZigBee: 2405 MHz to 2480 MHz

Data Rates• 802.11p (Mbps): 3, 4.5, 6, 9, 12, 18, 24, 27• 802.11n: MCS0 to MCS7 (with and without short GI)• 802.11a/g (Mbps): 6, 9, 12, 18, 24, 36, 48, 54• 802.11b (Mbps): 1, 2, 5,5, 11• Bluetooth (Mbps): 1, 2, 3• ZigBee: 250 kbps

802.11p Channel Support, Switching and Access• Control Channel (CCH) and Service Channel (SCH) Coordination• <1ms channel switching time between CCH and SCH• 50ms channel dwell time in CCH and SCH• CCH for broadcast, high priority and single use safety messages and SCH for IP data• Alternative Channel Switching• Continuous Channel Switching• Extended Channel Access• Software Queuing• Prioritized channel access queues with configurable channel access parameters

Performance• 802.11p: +23dBm (+/- 1 dBm) at 64 QAM with Class C Mask; -94 dBm Receiver Sensitivty• 802.11n: +23 dBm (+/1 1 dBm) at 64 QAM; - 97 dBm Receiver Sensitivity for 2.4 GHz and -94 dBm Receiver Sensitivity at 5 GHz• Bluetooth: Class-1 Transmit Power up to +20 dBm; -94 dBm Receiver Sensitivity• ZigBee: +19 dBm Transmit Power; -102dBm Receiver Sensitivity• Temperature: -40C to +85C• Transmit Center Frequency Tolerance (802.11p): +/- 5ppm across -40C to +85C and all data rates• Channel Rejection (802.11p): o Adjacent Channel: 25 dB - 3 Mbps; 15 dB - 27 Mbps o Non-Adjacent Channel 45 dB – 3 Mbps; 23 dB – 27 Mbps

Bluetooth, GPS Support• GNSS (GPS, GLONASS, QZSS) with PPS for timing synchronization; <1m accuracy• Bluetooth for interfacing with Smart Phone and CAN bus

Interfaces• 10/100/1000 Mbps Ethernet (RJ45) with PoE• USB 2.0 OTG• USB 2.0 Host• HDMI Display Port• Serial Console• CAN• Digital I/Os• BroadR Reach automotive Ethernet*

WAVE Standard Support• IEEE 1609• ETSI ITS G5*

Operating System• Linux• Automotive Grade Linux, Android, QNX*

Packet Control• TX power control per packet• Data rate control per packet

Security• Signing and verification of messages• Encryption and decryption of messages• Signing and verification of WSAs• Local certification manager and SCMS support

Certificate Management• IEEE 1609 certificate update• Time limited IEEE 1609 certificate

Message Logging• TX/RX packets• System events• Log offload configuration (IPV4 or IPV6)• WAVE service announcement configuration

Human Machine Interface• Smart phones with Bluetooth interface (audio and data)

SAE J2735 Messages• BSM, TIM, Map, SPaT, RSA, SSM

Sample Applications• TX and RX of supported SAE J2735 messages• Emergency Electronic Brake Light (EEBL) with Bluetooth message output (audio and data)• Road Side Alert (RSA) with Bluetooth message output (audio and data)

SDK Contents• Linux based tool chain (with integrated drivers and stacks)• IEEE 1609 API Library• Wi-Fi API Library• Bluetooth API Library• 802.15.4/ZigBee API Library• FlexCAN/J1939 API Library• Sample Applications• SDK User Guide• SDK Quick Start Guide• SAE J2735 ASN Library

Miscellaneous• IP Protocols: IPV4/IPV6• Interactive Communication: SSH, Telnet

Product Order Information

Product Number: WaveCombo-SDK1Description: Software development kit for WaveCombo (WCMBA1-NBZ-D0P) module

*Under development, Please contact Redpine sales at sales@redpinesignals.com for further details.

™

For additional information, please contact Sales at Redpine Signals, Inc.:Redpine Signals, Inc. • 2107 North First Street • Suite 540 • San Jose, CA 95131Phone: +1408 748 3385 • Email: sales@redpinesignals.com

© Copyright 2016 Redpine Signals, Inc. All Rights Reserved.

Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application. Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals, Inc. All other company names, products and logos are registered trademarks of their respective companies.

®

®DRIVING WIRELESS CONVERGENCEwww.redpinesignals.com