waterproofing systems systems brochure_a4-uae...waterproofing systems waterproofing systems...
TRANSCRIPT
Waterproofing Systems
IntroductionEstablished in Sweden in 1980, Terraco continues its proud tradition of producing environmentally friendly construction materials from strategically located production plants, supplying to over 75 countries across the globe. Waterproofing systems have for many years been intrinsic to the company’s success and contin-ued global expansion.
Terraco has been a leader of eco-friendly waterproofing systems and solutions for over 30 years and we are proud to present our comprehensive waterproofing range consisting of:
• An advanced range of 2-component cementitious acrylic waterproof coatings designed to cover all positive pressure masonry and concrete waterproofing requirements; • A polymer enhanced 1-component cementitious waterproof coating designed for easy application;• A rapid setting water-stop plug mortar for repairing running water leakages in masonry and concrete;• A range of liquid elastomeric coatings designed for roof waterproofing applications;
Terraco waterproofing. Proven performance.
ENVIRONMENTALLYFRIENDLY
R&D leads the way
The primary objective of Terraco’s R&D programs is to provide users of our construction products with innovative solutions to their onsite challenges when it comes to waterproofing. Terraco’s primary R&D centre situated in Ireland is supported by 5 other R&D centeres in Turkey, U.A.E., Russia, China and Korea. Highly qualified and experienced technical staff are used to service customer requirements onsite. This empowers Terraco to be a leading innovative waterproofing solutions provider.
Adding value to quality
Benefits
Terraco’s comprehensive range of quality environmentally friendly waterproofing products are designed with long-life flexibility in mind, with the ability to adhere to porous and non-porous surfaces, as well as old and new surfaces. These products are suitable for use in areas of extreme climatic conditions.
DesignedFlexibility
Advantages
Non-toxic
Weatherresistant
Vapourpermeable
Excellentadhesion
Easy toapply
Seamlesscoatings
Waterbased&
Eco-friendly
ENVIRONMENTALLYFRIENDLY
ENVIRONMENTALLYFRIENDLY
TERRACO WEATHERCOAT GP (2 component - elastomeric water proofing) is a high quality, versatile permanent waterproofing system for roofs, facades, swimming pools, cementitious water tanks, foundations and more. TERRACO WEATHERCOAT GP has long-life flexibility and is ideally suited for use in areas with extreme climatic conditions. After drying can be walked upon uncovered. After application the TERRACO WEATHERCOAT GP system has high resistance to atmospheric pollution, UV light.
GP
Brush Spray Roller Trowel
Features and benefits:• Permanent waterproofing.• Excellent abrasion resistance.• Non-toxic, ideal for potable water reservoirs.• Weather resistant. • Excellent adhesion properties to new and old surfaces of concrete and tiles.• Highly flexible.• Vapour permeable.• High resistance to chloride ion diffusion.• Cement mortars adhere to it.• Eliminates efflorescence that results from ingress of water from backfill.• Eliminates saponification that attacks surface paints.• Possible to fix directly on top of tiles.
Method of Application:• Apply 1 coat of TERRABOND A (Diluted 1:3 with water) by brush / roller as a primer coat.• Apply 1 coat of WEATHERCOAT GP.• Embed a layer of glass fibre mesh into those areas which require reinforcement.• Allow to dry for 3 hours.• Apply a 2nd coat of WEATHERCOAT GP.• Total thickness : ±2mm.
111
ENVIRONMENTALLYFRIENDLY
TERRACO WEATHERCOAT 111 (1 component - polymer modified cementitious water proof coating) is an economical, permanent waterproofing system for concrete and masonry. It is ideal for use in areas which are dimensionally stable such as foundations and retaining walls etc. It is applied in 2 - 3 coat application.
Features and benefits:• Seamless permanent waterproofing.• Excellent abrasion resistance.• Weather resistant. • Excellent adhesion properties to new and old surfaces.• Flexible.• Vapour permeable.• Cement mortars adhere to it.• Eliminates efflorescence that results from ingress of water from backfill.• Eliminates saponification that attacks surface paints.• Consistant polymer / cement ratio.• Easy application.• Possible to fix directly on top of tiles.
Method of Application:• Apply 1 coat of TERRABOND A (Diluted 1:3 with water) by brush / roller as a primer coat.• Apply 1 coat of WEATHERCOAT 111.• Embed a layer of glass fibre mesh into those areas which require reinforcement.• Allow to dry for 3 hours.• Apply a 2nd coat of WEATHERCOAT 111.• Total thickness : ±2mm.
ENVIRONMENTALLYFRIENDLY
TERRACO TERRACRETE (2 component - acrylic modified cement based waterproof slurry coat) is a waterproof coating which requires only simple site mixing prior to application. Once dry, it forms a strong, flexible waterproof coating. TERRACRETE is an effective barrier to water and inhibits the passage of salts and CO2 gas.
Features and benefits:• Waterproof and weatherproof coating.• Allows surface to breathe while remaining strongly anchored to the substrate.• Exposed trafficable coating.• Can be applied to green concrete.• Provides a seamless coating.• High flexibility.• High surface adhesion.• Non-toxic.• Possible to fix directly on top of tiles.
Method of Application:• Apply 1 coat of TERRABOND A (Diluted 1:3 with water) as a primer coat.• Apply 1 coat of TERRACRETE.• Embed a layer of glass fibre mesh into those areas which require reinforcement.• Allow to dry for 3 hours.• Apply a 2nd coat of TERRACRETE.• Total thickness : ±2mm.
ENVIRONMENTALLYFRIENDLY
Features and benefits:• Waterproof and weatherproof coating.• Allows surface to breathe while remaining strongly anchored to the substrate.• Provides a seamless coating.• High flexibility.• Fast drying.• Reflects Ultra-Violet (light) rays.• Easy application.
Method of Application:• Porous substrates: Apply 1 coat of PENETRATING PRIMER or a solution of TERRABOND A (Diluted 1:3 with water) as a primer coat.• Apply 1 coat of FLEXICOAT (1 – 2 m² / ltr).• Embed a layer of glass fibre mesh into those areas which require reinforcement.• Allow to dry for 6 hours.• Apply a 2nd coat of FLEXICOAT.
TERRACO FLEXICOAT is an elastomeric acrylic waterproof coating providing excellent weather resistance. TERRACO FLEXICOAT has long life flexibility and is ideally suited for use in areas with extreme climatic conditions. After drying, the surface can be walked upon uncovered.
Features and benefits:• Economical.• Waterproof and weatherproof coating.• Breathable coating.• Provides a seamless coating.• Fast drying.• High flexibility.• Reflects Ultra-Violet (light) rays.• Easy application.
Method of Application:• Porous substrates: Apply 1 coat of PENETRATING PRIMER or a solution of TERRABOND A (Diluted 1:3 with water) as a primer coat.• Apply 1 coat of MAXI ROOF COATING (1 – 2 m² / ltr).• Embed a layer of glass fibre mesh into those areas which require reinforcement.• Allow to dry for 6 hours.• Apply a 2nd coat of MAXI ROOF COATING.
ENVIRONMENTALLYFRIENDLY
TERRACO MAXI ROOF COATING is a one pack, economical roof coating providing excellent weather resistance. TERRACO MAXI ROOF COATING is designed for application on roofs constructed from a wide variety of materials like concrete, light weight concrete, roof tiles, wood, galvaniced steel and cement fibre boards.
ENVIRONMENTALLYFRIENDLY
Terraco Pluggit 311 is a one-component rapid setting repair mortar which is used to stop water leakages in concrete and masonry where running water or mois-ture seepage is present. Terraco Pluggit 311 is shrink-age compensated and hence creates a watertight repair even under constant water pressure. It is suitable for use to fill static cracks and holes in founda-tions, tunnels, reservoirs, sewerage pipes, basements, water tanks, etc.
Features and benefits:• Rapid setting formulation.• Shrinkage compensated. • One-component easy to use compound. • Chloride-free, corrosion-free compound. • High early strength properties. • Sets above and below water.
Method of Application:For wet application - remove any standing water from the repair area. For dry application - moisten substrate before application of Pluggit 311. Then proceed as follows:
• Mix a required quantity with water to form a stiff paste.• Only mix sufficient material and use within 1-2 minutes. • Do not mix for more than 30 seconds.• Press paste into damaged area and hold in place until set. • Terraco Pluggit 311 will set in 3-5 minutes.• Once set remove excess material by cutting surface with a trowel.
ROOFING &SLABS
Exposed Flat RoofingTerracesCar Park Foundation Slab, Walls and Roof
WET ROOM
S &BALCONIES
Bathrooms and ToiletsUnder-Tile WaterproofingBalconiesDry-Wall Wet AreasPatios
Irrigation CanalsSalt Water TanksSwimming PoolsPotable Water TanksPlanter BoxesDecorative PondsConcrete Gutters
WATER RETAININGSTRUCTURES
STRUCTURAL
FoundationsRetaining WallsBridge StructuresBasementsRunning Water Repair
ENVIRONMENTALLYFRIENDLY
AREAS OF USE
RATING: Acceptable Good Optimum
Which Waterproofing Product?
ENVIRONMENTALLYFRIENDLY
Please refer to applicable Datasheets before applying Terraco Waterproofing products. Additional information on www.terraco.com
Technical Data
Weathercoat GP Weathercoat 111 Terracrete Flexicoat Maxi Roof CoatingPluggit 311
Description
Component
Cementitious / acrylic elastomeric waterproofing system
2 Component 1 Component 2 Component 1 Component 1 Component1 Component
Binders Hydraulic / Organic Hydraulic / Organic Cement / Acrylic Styrene / acrylic ester Styrene / Acrylic esterHydraulic / organic
Toxicity Non-toxic Non-toxic Non-toxic Non-toxic Non-toxicNon-toxic
Density @25°c 1.70 - 1.80 kg / Ltr (mixed) (Powder 3parts : Resin 1 part by
weight)
1.75 - 1.85 kg / Ltr (mixed) 1.70 - 1.80 kg / Ltr (mixed) 1.33±0.05 kg / Ltr 1.45±0.05 kg / Ltr1.8 - 1.9 kg / Ltr (mixed)
HydrostaticPressure TestEN 14891:2007
no water penetration @ 1.5bar pressure
- no water penetration @ 1.5bar pressure
- --
TensileStrength(N/mm²)
0.8 (7 days) - - 0.8 (BS 2782) 1.5 (BS 2782)>1 (28 days)
Crack BridgingAbility EN14891:2007
>1mm - >0.75mm - --
Pot Life >1 hr >2 hr >1 hr - -2 - 4 min
MaterialConsumption
1.5-2 kg/m²/mm 2.3 -3.0 kg/m² 1.8-2kg/m²/mm 1-1.5 kg/m² in 2 coats 1.5-2 kg/m² in 2coats1.6 kg/m²/mm thickness
Recoating Time 6 hours 6 hours 6 hours 6 hours 6 hours6 hours
Packaging
Storage inunopened originalcontainers
Powder : 15kg bagsResin: 5kg jerricans
12 months 12 months 12 months 12 months 12 months9 months
Flexural Strength - - - - ->3N/mm² (7 days) >8N/mm² (28 days)
ApplicationThickness
1-2 mm 1.5-2 mm 1-2 mm - -50 mm (vertical), 30 mm (overhead)
25kg bags Part A: 15kg bags Terracrete Part B: 5kg jerricans
20kg, 5kg and 20 liter plastic pails
20kg, 5kg pails5 x 1 kg pack in a 5kg plastic pail and 20 x 1 kg pack in a 20 kg
plastic pail
CompressiveStrength
- - - - ->20N/mm² (7 days) >25N/mm² (28 days)
Yield 11.76 lit (3:1 mixed) 16.75 ltr (mixed) 11.4 ltr (3:1 mixed) - -20 kg powder + 5.2 Ltr watergives 13.5 Ltr mix
Potability Suitable for potable water tanks
- - - --
Pigments - - - Weather resistance pigments Weather resistance pigments-
Fillers Crushed and precisely graded fillers
Crushed and precisely graded fillers
Silica / dolomite Crushed and precisely graded fillers
Crushed and precisely graded fillers
Graded fillers of sand or quartz
Solid Content(% weight)BS 3900:Part B2
Powder 100 % , Resin 50 ± 2% 100% Powder 100 % , Resin 44 ± 2% 67 ± 2% 70 ± 2%100%
WaterPermeability
NIL(DIN 1148 part 5:1991)
- NIL(BSEN12390-8:2000)
- --
Reduction inwater absorptionafter 24 hoursASTM D870
- - - >90% >75%-
Bond Strengthto concrete(ASTM D4541:2002)
>0.5 N/mm²(EN14891:2007)
>0.5 N/mm² 0.8 N/mm² (EN14891:2007)
>0.5 N/mm² >0.5 N/mm²-
Elongation >25% - >5% 400% BS 2782:P3-1975 >100% BS 2782:P3-1976-
SRI value(ASTM E1980-01)
- - - >90 >90 -
Mixing Ratio Coating 2:1 (Powder / Resin)Slurry 3:1 (Powder / Resin)
Screed 4:1 (Powder / Resin)
25kg Powder : 6 Ltr Water 3 parts powder : 1 part resin - -1 kg Powder : 0.26 Ltr Water
Drying Time 3 hrs in normal conditions. 3 hrs in normal conditions. 3 hrs in normal conditions. 6 hours between coats (depending on weather and
site conditions).
6 hours between coats (depending on weather and
site conditions).
5 minutes (initial), 2 hours (final)
Colours Natural White and Grey(mixed)
Natural White and Grey(mixed)
Natural White and Grey(mixed)
White, Grey & Stone White, GreyDark Grey
Polymer modified cementitious coating
Acrylic modified cement based - slurry coat
Ready-mixed, flexible, seamless, waterproof roofing compound
Ready mixed waterproof roofing compound
Cement based rapid setting water-stop mortar