water treatment and purification - lenntech€¦ · the entire process consists of these elements:...
TRANSCRIPT
GRUNDFOS DATA BOOKLET
NB32-200.1/205 A-F2-A-BAQE Grundfos pump 97839216
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/NB000/97839216/NB-32-200-1-205-A-F2-A-E-BAQE.html
[email protected]. +31 152 610 900 fax. +31 152 616 289
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description1 NB 32-200.1/205 A-F2-A-E-BAQE
Product No.: On request
Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 withdimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensionsaccording to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft anda back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbingthe pump housing or pipework.
The unbalanced rubber bellows seal is according to DIN EN 12756.The pump is close-coupled to a fan-cooled asynchronous motor.
Further product detailsThe back pull-out design means that the pump can be serviced by a single person without disturbingthe pump housing or pipe work.
Cast-iron parts have an epoxy-based coating made in a cathodic electro-deposition (CED) process.CED is a high-quality dip-painting process where an electrical field around the products ensuresdeposition of paint particles as a thin, well-controlled layer on the surface. An integral part of theprocess is a pretreatment. The entire process consists of these elements:1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.
PumpThe pump housing has both a priming and a drain hole closed by plugs.The impeller is a closed impeller with double-curved blades with smooth surfaces. The impeller isstatically balanced according to ISO 1940-1 class G6.3 and hydraulically balanced to compensate foraxial thrust.Wear rings used in pump housing and for impeller are made of bronze/brass or cast iron.
Motor stool and pump cover are made of cast iron (EN-GJL-250). Coupling guards are fitted to themotor stool. The pump cover is provided with a manual air vent screw for venting of the pump housingand the shaft seal chamber.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
• Rotating seal ring material: carbon graphite, metal-impregnated• Stationary seat material: silicon carbide (SiC)
This material pairing has a very good corrosion resistance and is especially suitable for water up to 120°C. However, seal life will be reduced at temperatures above 90 °C. The material pairing is notrecommended for liquids containing particles as this will result in heavy wear on the SiC face.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
1/12
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalledconditions.Thermal switches must be connected to an external control circuit in a way which ensures that theautomatic reset cannot cause accidents. The motors must be connected to a motor-protective circuitbreaker according to local regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Rated flow: 22.3 m³/hRated head: 44.3 mActual impeller diameter: 205 mmImpeller nom: 200.1 mmPrimary shaft seal: BAQESecondary shaft seal: NONECurve tolerance: ISO9906:2012 3B
Materials:Pump housing: Cast iron
EN-GJL-250ASTM A48-40 B
Impeller: Cast ironEN-GJL-200ASTM A48-30 B
Shaft: Stainless steel1.4301304
Rubber: EPDMWear ring mat.: High alloy brass(CuZn34Mn3AI2
Installation:Maximum ambient temperature: 60 °CMaximum operating pressure: 16 barFlange standard: EN 1092-2Pump inlet: DN 50Pump outlet: DN 32Pressure rating: PN 16
Electrical data:Motor type: 132SCIE Efficiency class: IE3Rated power - P2: 5.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D VRated current: 11 AStarting current: 1080-1180 %Cos phi - power factor: 0.87-0.82Rated speed: 2920-2940 rpm
2/12
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionEfficiency: IE3 89,2%Motor efficiency at full load: 89.2 %Motor efficiency at 3/4 load: 90.0 %Motor efficiency at 1/2 load: 89.6 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FLubricant type: Grease
Others:Minimum efficiency index, MEI ≥: 0.58ErP status: EuP Standalone/Prod.Net weight: 82 kgGross weight: 104 kgShipping volume: 0.509 m³
3/12
Printed from Grundfos Product Centre [2018.06.003]
On request NB 32-200.1/205 A-F2-A-E-BAQE 50 HzH
[m]
0
5
10
15
20
25
30
35
40
45
50
55
60
Q [m³/h]0 2 4 6 8 10 12 14 16 18 20 22 24 26
eta[%]
0
10
20
30
40
50
60
70
80
90
NB 32-200.1/205, 3*400 V, 50Hz
205 mm
P[kW]
0
1
2
3
4
5
6
7
NPSH[m]
0
1
2
3
4
5
6
7
P1
P2
4/12
Printed from Grundfos Product Centre [2018.06.003]
H[m]
0
5
10
15
20
25
30
35
40
45
50
55
60
Q [m³/h]0 5 10 15 20
eta[%]
0
10
20
30
40
50
60
70
80
90
NB 32-200.1/205, 3*400 V, 50Hz
205 mm
P[kW]
0
1
2
3
4
5
6
NPSH[m]
0
1
2
3
4
5
6P1
P2
4 x 19
4 x 19
50
80
292.5 391 100
134
32
180
160
5012
190
70
300
202
103
135 137
100 240
L3L2L1
+T +T+T
TO AMPLIFIERRELAY
IEC
TP2
11 T
HER
MAL
LY P
RO
TEC
TED
WH
EN T
HE
THER
MIS
TOR
S AR
EC
ON
NEC
TED
TO
AM
PLIF
IER
REL
AY F
OR
CO
NTR
OL
OF
MAI
N S
UPP
LYTH
ERM
ISTO
RS
PTC
AC
CO
RD
ING
TO
DIN
440
82
TO AMPLIFIERRELAY
+T +T+T
L1 L2 L3
Description ValueGeneral information:
Product name: NB 32-200.1/205A-F2-A-E-BAQE
Product No: On requestEAN number: On requestTechnical:Rated flow: 22.3 m³/hRated head: 44.3 mActual impeller diameter: 205 mmImpeller nom: 200.1 mmPrimary shaft seal: BAQESecondary shaft seal: NONEShaft diameter: 24 mmCurve tolerance: ISO9906:2012 3BPump version: AMaterials:Pump housing: Cast iron
EN-GJL-250ASTM A48-40 B
Impeller: Cast ironEN-GJL-200ASTM A48-30 B
Shaft: Stainless steel1.4301304
Material code: ARubber: EPDMCode for rubber: E
Wear ring mat.: High alloybrass(CuZn34Mn3AI2
Installation:Maximum ambient temperature: 60 °CMaximum operating pressure: 16 barFlange standard: EN 1092-2Pump inlet: DN 50Pump outlet: DN 32Pressure rating: PN 16Wear ring(s): neckring(s)Connect code: F2Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 132SCIE Efficiency class: IE3Rated power - P2: 5.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D VRated current: 11 AStarting current: 1080-1180 %Cos phi - power factor: 0.87-0.82Rated speed: 2920-2940 rpmEfficiency: IE3 89,2%Motor efficiency at full load: 89.2 %Motor efficiency at 3/4 load: 90.0 %Motor efficiency at 1/2 load: 89.6 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: PTCMotor No: 87322229Mount. design. acc. IEC 34-7: IM V1/B5
4 x 19
4 x 19
80292.539110032
5012
70
103
135137100240
5/12
Printed from Grundfos Product Centre [2018.06.003]
Description ValueLubricant type: GreaseOthers:Minimum efficiency index, MEI ≥: 0.58ErP status: EuP Standalone/Prod.Net weight: 82 kgGross weight: 104 kgShipping volume: 0.509 m³
6/12
Printed from Grundfos Product Centre [2018.06.003]
On request NB 32-200.1/205 A-F2-A-E-BAQE 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
I[A]
0
4
8
12
16
NB32-200.1/205 + 132SC 5.5 kW 3*400 V, 50 Hz
eta
cos phi
I
n[rpm]
2400
2600
2800
3000
3200
P1[kW]
0
2
4
6
n
P1
7/12
Printed from Grundfos Product Centre [2018.06.003]
On request NB 32-200.1/205 A-F2-A-E-BAQE 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
4 x
19
4 x
1950
80
292.
539
110
0
134
32
180 160
5012
190
70
300
202
103
135
137
100
240
8/12
Printed from Grundfos Product Centre [2018.06.003]
Exploded view
301a
219
92
7
7a
77
301a
92
11
9
51
100
49
105
45
215a
215
18
217215a
534a534
531531a
28
17
251d
251a
6
11b
66a
67
530530a
9/12
Printed from Grundfos Product Centre [2018.06.003]
Sectional drawing (TM058200 for TPE2,TPE3)
4
2 13
5
TM058200
10/12
Printed from Grundfos Product Centre [2018.06.003]
Exploded view ( TM057026 for MGE model H/I )
251d
251b
290
287277a
286
277
273a
273
268268a289a289
288b288288a
251a
252b
156c
159d
156b
156d188
275a
153
154
158
178
185
192
191
159e
156c 156
151152
266
187
291
293
252a
172
150
287a
502
273b
157
11/12
Printed from Grundfos Product Centre [2018.06.003]
Parts list NB 32-200.1/205, Product No. On requestValid from 1.3.2011 (1109)
Pos Description Annotation Données de classification Référence Quantité Unité+ Motor 1 pcs- Nut 1 pcs
66 Washer 166a Spring lock washer 167 Nut Thread: M14 1
- Motor stool cpl. 1 pcs1a Motor stool 17 Coupling guard 277a Pan head screw 4
- Pump housing cpl. 1 pcs6 Pump housing 136 Nut Thread: M10 8
- Stub shaft 1 pcs9 Socket set screw Length (mm): 6 2
Thread: M811 Parallel key Dimension: 6X6X35 151 Pump shaft 117 Air vent screw 1 pcs
- 20 Plug 1 pcs19 Pipe plug Thread: R 3/8 249 Impeller Outer diameter: 205 1 pcs72.a O-ring Diameter: 221,84 1 pcs
Material type: EPDMThickness: 3,53
105 Shaft seal Material type: BAQE 1 pcs
12/12
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289