7/28/2019 Water Softening Plant

http://slidepdf.com/reader/full/water-softening-plant 1/3

J E P TWATER SERVICES

Manufacturers & Suppliers of Water Treatment Plant

Spares & Equipment

 Water Treatment Plant JEPT ASSOCIATES Spares

J E P TWATER SERVICES

Manufacturers & Suppliers of Water Treatment Plant

Spares & Equipment

Water Softening Plant

JEPT Associates supplies an extensive and comprehensive range of Water Softening Plant.

The presence of hardness salts (calcium and magnesium ions) in the make upwater supplies to boilers, cooling and process waters can have a seriousimpact on their performance. Loss of heat transfer in boilers and poor coolingin re-circulating cooling systems results in an increase in both energy andwater consumption, and an increase in operating costs.

The reliable JEPT standard range effectively removes these hardness salts andprovides a valuable return on your investment.

Standard range:

Model 132 - Water Softeners up to 5m3/hr

Model 230/250 - Water Softeners up to 15m3/hrModel 360/LF - Normal-Flow Water Softeners up to 20m3/hrModel 360/HF - High-Flow Water Softeners up to 50m3/hr

The standard range of units provides service flow rates from 0.65m3/hour to50 m3/hour, and configuring the units in a duplex or triplex system willprovide a further increase in design flow rates.

The water softeners have capacities which vary from 4.3m3 to 420m3 witha total input hardness level of 200ppm expressed as calcium carbonate.

The water softeners use the well-proven "Ion Exchange" process to convertthe hard water ions of calcium and magnesium to sodium ions. The

resultant water to service is typically less than 4 ppm total hardness.

JEPT Water Softeners have several different control options for instigatingautomatic plant regeneration:

• Water meter control - regenerates after a specified volume of water by counting electrical pulses from

the meter supplied with the softener

• Time-clock control - regenerates at regular pre-set time intervals

• Microprocessor Control System programmed for water hardness and

flow rate

The softener vessels are of a seamless pressure vessel in GRP construction

with moulded polyethylene inner and glass fibre reinforced wound outer shellfor durability and long life.

The control valves are of the hydraulic double piston multiport type. Valvescan be "top mount" or "side mount" entry for increased flow capacity.

The JEPT range of softening units have several options of salt/brining systems:

Single brine tank

7/28/2019 Water Softening Plant

http://slidepdf.com/reader/full/water-softening-plant 2/3

Combined salt and brine tank for higher salt usage bulk salt systems.

Raw water break tanks, booster pump sets, level control systems and other ancillary equipment are availableas standard.

Typical Boiler Uses: Water Softner plants meeting sugar Industry requirements for treated boiler in put waterLaundries. Boiler make up for low pressure boilersBrewing/soft drinksBlended for process waters in high hardness areasDyeingFood processing

Cooling tower make-up.

*Services available Water Softner trouble shooting.

------------------------------------------------------------------------------------------------------------------------------

  Dated:- 22-7-2011

Ref.#.WBR262k9

To,

Mr.

------------------.

Subject: - Quotation for water softening plant 

Capacity = 20m3/hr 

Dear Sir,

This refers to our discussion, and we are pleased to offer the below mention quotation.

The plant will have the following specifications.

1. Filtration system

Bag filter (to filter any water suspension) .

2. Softening Vessel

Qty. 2 No. (one operational one stand by).

7/28/2019 Water Softening Plant

http://slidepdf.com/reader/full/water-softening-plant 3/3

Flow Rate 20m3/hr.

Vessel Material M.S inner fiber-glass coated.

Media Cation exchange resin.

Bed-Height 40_44 ins.

3. Softener control valve

Auto Control valve Time Base Automatic regeneration.

4. Skid StructureThe unit will be skid mounted made of carbon steel frame,

 

Total Amount:-

 

Water Softening Plant

  RS:- 7,00,000/(excluding all taxes). As stated per-quotation above.

Terms and Conditions :-

1- 50% payment in advance.

2- 35% payment on delivery

3- 15% payment on Successful running of plant.

4- Time of delivery one month after receiving advance payment .

5- One year warrantee against manufacturing defects

Looking forward,Yours Sincerely,

JEPT ASSOCIATES