Water Saver Unit

Product Description The Water Saver Unit (WSU) is designed to conserve water during plate processing. It can be conveniently retrofitted to many Kodak processors (see list below). Upon installation, the rinse section is converted into an internal rinse recirculation unit. The water saver will open the water solenoid when plates pass over the entrance sensor during processing. The amount of time the water solenoid stays on is adjustable from 1-999 seconds.

Environmental BenefitsThe WSU is designed to conserve the amount of water used in a typical plate making operation. The water saver is ideal for those who want to save money on water and sewer bills. It can also be a very useful tool for minimizing the effluent for printers who cannot dispose their waste to a septic tank system.

ApplicationsThe water saver can be used with the following processors:

• Current Quartz (G&J) Processors (one exception, see below)• NES Worldwide processors (NE28 to the full size NE1650)

The water saver CANNOT be used to the following processors:• G&J Quartz MKIII style processor• G&J Mercury News• G&J Raptor • Egraf processors

Water Saver Control

Water Saver Unit

2

SpecificationsElectrical 220 volt/single phase/50/60 Hertz /2

InstallationIt is recommended that this unit be ordered with your new processor so it is installed at the factory. However, it can also be retrofitted at the customer site upon request. The WSU should only be installed by a certified technician.

Products Available

Catalog # Model DescriptionKY0731734 Water Saver Unit Kit for conserving water during

plate processing

More InformationThis service is part of Kodak’s Printer’s EnviroServices Program (PEP). Helping customers with environmental concerns and compliance is a major commitment of Kodak. PEP consists of a comprehensive range of environmental and safety products and services specially designed to allow Kodak GCG customers to meet their environmental, safety, and health objectives in a cost-effective manner. For more information, please contact the Kodak EnviroServices Hotline at (877) 574-7274 or PEP@Kodak.com.

Disclaimer of Warranties and Limitation of Liability

Some services to be provided under this offer are to be performed solely by independent vendors from whom Kodak’s Graphic Communications Group does not receive fees. There are no warranties, express or implied, in connection with the provision of this service, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. The user shall determine the suitability of these services for the intended use, and the user assumes all risk and liability if these services are not fit for the particular purpose intended. Kodak shall not have any obligation or liability to any user or other third party arising out of any services performed by an independent vendor, pursuant to this offer. The user shall indemnify, defend and hold Kodak harmless from and against any and all claims, costs and liabilities arising directly or indirectly from the user's use of these services. The services offered in this brochure are subject to change and/or discontinuance without notice.

© Kodak, 2006. All trademarks and registered trademarks used herein are the property of their respective owners.

REVISION DATE: AUGUST 31, 2009