water retaining structures quick guide
DESCRIPTION
water retaining structure quick guideTRANSCRIPT
![Page 1: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/1.jpg)
Structural Design ConsiderationsBy Gene Gopenko, P.E.
![Page 2: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/2.jpg)
GOALS:
• Serviceability• Durability • Low Permeability• Limiting Deflections and Cracks
![Page 3: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/3.jpg)
References
• ACI 318-89. Building Code Requirements for Reinforced Concrete
• ACI 350R-89. Environmental Engineering Concrete Structures
• “Strength Design for Reinforced Concrete Hydraulic Structures” by ASCE, ( adapted from COE Manual)
![Page 4: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/4.jpg)
References (cont.)
• Structural Design of Standard Covered Risers. Technical Release No30 (1965) by SCS.
• “Rectangular Concrete Tanks” by Portland Cement Association
• “Moments and Reactions for Rectangular Plates” by US Bureau of Reclamation
![Page 5: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/5.jpg)
ACI 350R-89:
“ This report presents recommendations for structural design, materials, and construction of concrete tanks, reservoirs, and other structures commonly used in water containment, industrial and domestic water, and wastewater treatment works, where dense, impermeable concrete with high resistance to chemical attack is required.”
Among Types of Structures: intakes and conduits.
![Page 6: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/6.jpg)
START WITH RIGHT INGREDIENTS!
![Page 7: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/7.jpg)
Concrete Requirements
• Min. Concrete Strength=4000 psi at 28 days• Air Entrainment=5%±1%• Maximum Water-cement Ratio=.45• Maximum Slump=4 inches• Aggregates per ASTM C33, max. aggregate
size=1 inch• No admixtures containing calcium chloride
![Page 8: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/8.jpg)
Steel Reinforcing
• New Billet Steel to Confirm to ASTM A615 Grade 60
• Epoxy Coated RebarsMinimum Concrete Cover:
• Concrete Base=3 inches (4” COE)• Concrete Walls=2 inches (3” COE)• Stilling Basin=6” (COE)
![Page 9: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/9.jpg)
Temperature and Shrinkage Reinforcing
ACI 318 for Grade 60 Steel:As=0.0018bhACI 350R (use chart), butAs(min.)=0.0024bh
![Page 10: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/10.jpg)
Concrete Joints
• Construction Joints• Expansion Joints• Separation Joint
![Page 11: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/11.jpg)
Waterstops
![Page 12: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/12.jpg)
Crack Reduction
• Joint Spacing“Joint is controlled crack. Crack is uncontrolled joint”
• Reinforcing Distribution-try to reduce bar spacing!“Where the structure must be watertight, bar spacing should not exceed 12 inches”.
![Page 13: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/13.jpg)
Minimum Thickness ACI 350R:
“Walls with height greater than 10 feet shall be a minimum of 12 in thick and shall contain reinforcement on both faces.“
“A minimum of 8 in is required where 2 in concrete cover is desired”- criteria for top slabs.
![Page 14: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/14.jpg)
Flotation Criteria(Structural Design of Covered Risers, SCS TR 30)
FS=1.5• Riser Located in Reservoir-
Low stage inlets plugged• Riser Located in Embankment
Add buoyant weight of fill over base
![Page 15: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/15.jpg)
Flotation Criteria(Flotation Stability Criteria for Concrete Hydraulic
Structures, US Army COE)
Loading Conditions FS
• Construction 1.3• Normal Operation 1.5• Extreme (max. pool) 1.1
![Page 16: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/16.jpg)
Design Loads
• Dead Loads:– Weight of Concrete– Weight of Equipment
• Live Loads:– Earth and Silt Pressure– Water (Hydrostatic Load)– Surcharge– Cover slab LL=100 psf – Wind Load=50 psf, for risers in reservoir only– Ice Load (max. 2’ thick, 5 kips/sq. ft)
![Page 17: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/17.jpg)
LOAD DIAGRAM FOR CONCRETE RISER WALLS
RsRw
Ps Pw
![Page 18: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/18.jpg)
Hydrostatic Load:
Pw=γwHw, in lb/ft2 , γw= 62.4 lb/ft3,
Soil Load:
Ps=(Kr)(γs-γw)Hs, where
Kr=.5 (soil assumed at rest condition)
γs=126 lb/ft3 (soil weight available from Soil Report)
![Page 19: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/19.jpg)
Strength DesignU=R*Load Factors
U=1.4(DL)+1.7(LL), from ACI 318
ACI 350: In Hydraulic Structures, when reinforcing in flexure, the required strength 1.3U.
Strength Reduction Factor ϕ-Second Safety Provision in ACI.
Mr= ϕMn, ϕ=.9 for bending, ϕ=.85 for shear
![Page 20: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/20.jpg)
![Page 21: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/21.jpg)
Analysis for Plates (vs Simple Beam)
• Finite Elements Computer Model• Tables of Moments and Reactions
Coefficients• Moment Balance using Distribution Factors
![Page 22: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/22.jpg)
![Page 23: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/23.jpg)
![Page 24: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/24.jpg)
![Page 25: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/25.jpg)
![Page 26: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/26.jpg)
![Page 27: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/27.jpg)
Precast vs Cast-in-PlacePros and Cons
![Page 28: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/28.jpg)
![Page 29: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/29.jpg)
![Page 30: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/30.jpg)
![Page 31: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/31.jpg)
![Page 32: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/32.jpg)
![Page 33: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/33.jpg)
Lake Elkhorn Spillway Repair,Howard County, MD
![Page 34: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/34.jpg)
Dam Statistics
• Significant Hazard Dam• Built in 1974 on tributary to Little Patuxent • 18 high earthfill dam with 145 ft long ogee
spillway• Drainage Area 3.6 sq. miles
![Page 35: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/35.jpg)
![Page 36: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/36.jpg)
![Page 37: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/37.jpg)
![Page 38: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/38.jpg)
![Page 39: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/39.jpg)
![Page 40: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/40.jpg)
![Page 41: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/41.jpg)
![Page 42: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/42.jpg)
![Page 43: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/43.jpg)
![Page 44: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/44.jpg)
![Page 45: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/45.jpg)
![Page 46: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/46.jpg)
![Page 47: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/47.jpg)
![Page 48: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/48.jpg)
![Page 49: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/49.jpg)
![Page 50: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/50.jpg)
![Page 51: Water retaining structures quick guide](https://reader034.vdocuments.site/reader034/viewer/2022052200/5593e6221a28abee758b4805/html5/thumbnails/51.jpg)