BRCONTROL R1

Wastewater ControlsComplete Solutions for all your wastewater needs

PRE-CONFIGURED PANELSSimplex and Duplex Outdoor Panels – Pre-Engineered

Simplex and Duplex Features

• Outdoor Construction • Preconfigured with all that you need

• Solid State Control Board • High Liquid Level Alarm Circuit

• Thru-Door Mounted Controls • Can be wired for separate power supply

• Dry Contacts Standard • UL and CUL Listed

• Alternation – Duplex Only* Models available with capacitors for single phase

• More Common Options Available:- Seal fail, high temperature, cycle counter, E.T.M., lightning arrestors,

interface with building management systems

When to Use

Residential and commercial applications, when typical options are required.

ENGINEERED TO ORDER PANELSSimplex and Duplex Custom Panel – A Series Style Features

A series panels are completely modifiable panel with over thirty possible op-tions for the application of wastewater systems.

Base Panel Includes:

• NEMA 1 Enclosure • Run Lights

• Motors Rated for Continuous Duty • Control Logic Board

• Class 48, NEMA Starter in 3 phase • Run Light

• Hand-Off-Auto Switch on Front • Multiple Options Available

* Alarm not provided unless added as an option

When to Use

Commercial applications for multiple options. Engineered to order.

TOUCH SCREEN MONITORING PANELSFeatures

• Designed for Easy-Use Programming • 0-20 amp range for 1-phase

• Monitoring with Touch Pad on Inner Door • 0-25 smp range for 3-phase

• Hand-Off-Auto • Circuit Breakers

• 7-Segment LED Display - high water, float status, sequence error, low level, standard dose count, on/off pump count, runs, peak dose count

• Floats Include: (3) MilliAmpMaster Floats

• Options available for: Time Dose, Drip Irrigation Controls

• Manufactured by SJE

When to UseSpecialty applications for high-end monitoring. Floats included.

A1SEEWATER Oil Smart Switch

Liquid Smart Switch

A4-SEE1

A1SEE Panel Series Standard Effluent Pump

ALARM DEVICESFeatures• Indoor and Outdoor alarm panels for sump, effluent and wastewater systems

as well as cisterns and storage tanks.

• Use Normally Open (NO) floats for high level or Normally Closed (NC) for low level indication.

• Enclosures rated by NEMA Standards for location/placement. • NEMA 1 for indoor use • NEMA 3R or 4X enclosures for out door use

• LA... (Boulay Fab. Level Alarm) units are sold less floats.

• TA... (Tank Alert®) alarms are provided with floats.

• A4-2 (TA-AB) is a new design - see new data section.

• Standard models require a 120V power supply.

When to UseResidential or commercial applications for alarming high level only.

AQUAVAR CPCLatest generation of the Aquavar® series of Variable Speed Pump Controllers. This unit is offered in a wall, single phase input up to 50 HP, 208-230 volt and three phase 208-230 volt up to 100 HP! The latest software provides more versatility and flexibility with centrifugal wastewater pump applications then ever before!

Features• Motor protection built in! Protects based on OVERCURRENT, OVER/UNDER VOLTAGE,

PHASE LOSS, SHORT CIRCUIT, GROUND FAULT, OVERTEMPERATURE.• Built-in line choke. Similar to a line reactor, it provides the equivalent of 3-5% impedance

against transient voltage spikes and surges. Reduces harmonic distortion.• Fixed speed control relays. Control up to three fixed speed pumps with one Aquavar

CPC with programmable relays (starter panel extra). • Help text and programming “Wizards” to assist with set up.• Pressure transducer for wastewater not included.• UL, CUL, CE approvals• NEMA 1 standard design (indoor), with NEMA 12 and outdoor enclosures available.• System does not include options for seal fail. Must order seal fail panel separately.

When to UseFor commercial “green” use to save energy on oversized systems for future growth.

ELEVATOR SUMP KITS AND COMPONENTSThe Oil Smart Switch with panel or alarm, when combined with a pump, allows water to be pumped from Elevator sumps, leachate wells and transformer vaults without danger of pumping oil into sewers and waterways.

The Oil Removal System is an oil removal system providing alarm when oil is being pumped.

Features• Protects environment from hazardous waste• The solid state device senses between oil and water• Panel and switch kitted with effluent single phase pumps.• Only operates pump if water is sensed by probes. Does not operate if oil is

present in pit.• Oil Removal: Sensor differentiates between oil and water. Panel allows oil to

be pumped.

When to UseElevator sumps or other hazardous locations where oil may be present. Prevents environment hazard of oil.

Wastewater Controls Product LineFor over 40 years, we have been providing pump control solutions to our customers. The first

product was the SES controller. Today, CentriPro offers a wide range of capabilities for the

variable speed pumping, alarm devices, standard control and even touch screen monitoring.

Our philosophy has not changed: To provide quality, variety and systems solutions for our pump

customers.

CentriPro is a trademark of Xylem Inc. or one of its subsidiaries. © 2013 Xylem Inc. BRCONTROL R1 January 2013

Xylem Inc.

2881 East Bayard Street Ext. Seneca Falls, NY 13148 Phone: (866) 325-4210 Fax: (888) 322-5877www.centripro.com