Waste ManagementIntegrated Solutionsfor Cargo Vessels

Photo

: H

MM

DEERBERG MAIN OFFICEMoltkestrasse 6aD-26122 OldenburgGermanyTel.: +49-(0)441-973 57-0Fax: +49-(0)441-777 337Mail: info@deerberg-systems.de

JOCHEN DEERBERG BUSINESS CONSULTANCY

DEERBERG-SYSTEMS

DEERBERG-TRADING

established 1979Company Planning, MarketingOrganisation, SalesDiscussion partner for Executives

established 1982Technical Analysis, Design, Supply of partial or complete Concepts and Equipment for Waste Handling on board Ships

established 1985Cabin Safes, Minibars, Door Locking Systems

DEERBERG POLANDGDANSK OFFICE established 1992Jurek TylkowskiUliza Kollataja 4F83-200 StarogardPolandTel: +48-58-562-0790Fax: +48-58-562-0790Cell: +48-60-444-5087

DEERBERG USAMIAMI OFFICE

established 1992Hugo Cabrera

Collins Ave. 16100, #108Sunny Isles Beach

Florida 33160, USATel: +1-305-949-6391Fax: +1-305-949-0314Cell: +1-305-778-8351

DEERBERG UKLONDON OFFICEestablished 1992Tel: +44-207-266-2607Fax: +44-207-289-4260

DEERBERG FINLANDTAMMISAARI OFFICE

established 1993Wiola Talvi

Tel: +358-19-208-773Fax: +358-19-208-774

International Offices

SERVICE & REFIT AMERICA

SERVICE & REFIT DIVISION

Contact: Capt. Frank HeitkötterManager Service & Refit DivisionMoltkestrasse 6aD-26122 OldenburgGermanyTel: +49-(0)441-973 57-0Fax: +49-(0)441-973 57-33frank.heitkoetter@deerberg-systems.de

1756-2006Deerberg supplies Qualityin Tradition for 250 years

Sideview of Deerberg Incinerator IRL 50

Frontview of the Deerberg Sludge Oil Unit

Exhaust Gas Fan

General Description

The combustion chamber

of the IRL 50 Incinerator

is of cylindrical shape

refractory. An insulation

layer is fitted on the

outside of the refractory.

The outer shell is made

of double steel plates,

forming a jacket for air

cooling.

The steel plates are

screwed (not welded) and

allow easy mounting and

unmounting (especially

suited for retrofitting).

Sludge Oil Unit

The Sludge Oil Unit stores

and prepares sludge oil to

be burnt in the Incinerator.

Sludge is prepared by

heating and homogenizing

in a continous

recirculating process.

Exhaust Gas Fan

The Exhaust Gas Fan,

which is of centrifugal

type, is designed to

operate with an exhaust

gas temperature of up to

350° C. It is necessary to

prepare transition pieces

in order to to connect

the rectangular fan to a

circular piping.

Deerberg Densifier TC 14 is a small scale solution for compacting tins

Deerberg Bale Com-pactor 35/45 VL of-fers efficient volume reduction

Deerberg Glass Crusher GKF 550 –a reliable small-foot-print-solution

DISPERATOR-equipment for efficientglass waste handling

Disperator ABBox 2133SE-128 23 SKARPNÄCK, SWEDENtelephone: +46 8 724 01 60telefax: +46 8 724 60 70E-mail: info@disperator.se GK/Prod/Eng/000601

A Disperator glass crusher makes light work of handlingempty bottles, jars and other glass containers by grindingthem to small particles the size of sand. Most kitchens,bars and galleys have problems with this waste.

Collection and transport of waste glass is timeconsuming because of it’s large volume. And floor space,which should be put to better use, is occupied with amountain of empty bottles. These problems arealleviated when a Disperator glass crusher is used.

Model GKF 550 is easy to install in a kitchen, galley orin a garbage room.

GKF 550

Alternatively the glass crusher can be installed on a lowerfloor level, near to the point of waste collection, andfed with empty bottles by a tube from the bar, kitchenor galley above.

After being ground into small grains of glass with nosharp edges, an empty bottle has only 20% of it’s originalvolume which means less storage space, less frequentcollection and lower transport costs.

Disperator glass crusher GKF 550 is designed to givelong-life in environments where reliability and efficiencyis essential.

Volume reduction of glass bottles by 80%

For 25 years Deerberg-Systems has gathered valuable experience in Maritime Waste Handling – especially in the area of recycling and incineration of solid waste.

131 large passenger vessels,

64 navy vessels and more

than 600 cargo vessels

are fitted with Deerberg

equipment.

Based on this knowledge, we have selected a range of recycling equipment that is especially suited for Cargo vessels.

It handles glass, tins, and various packaging material in a most efficient way.

Our Solid Waste Treatment System is fully integrated and includes equipment for any type of garbage. There are solutions to simply collect, compact and steril-ize waste for later disposal in port, as well as integrated solutions in connection with incineration technology.

Obviously, the combination of an on-board incinerator and recycling equipment will significantly gains extra op-erational flexibility – a crucial factor for cargo concerns.

INCINERATOR

PURPOSEThe purpose of the incinerator is to burn the daily on board generated solid and liquid waste (IRL type only), in accordance with the Marpol / IMO-Rules.

IMO SPECIFIC REQUIREMENTSMarpol 73/78 Annex V limits the solid wastes materials that can be discharged to the sea and annex I prohibits any discharge of oily waste to the sea. In practical terms there are quantities of solid wastes that have to be stored onboard in adequate storage rooms to be unloaded at port facilities or alternatively an incinerator should be installed onboard. IMO requirements for incinerator plants installed onboard up to a capacity of 1500 kW are defined in Resolution MEPC76(40). This resolution gives detailed instructions for safety and controlfeatures, quantity control procedures, exhaust gas emissions, type tests and certifications.The incinerators are IMO type certified.

MAIN TECHNICAL DATA IR 10 IRL 10 IR 30 IRL 30 IR 50 IRL 50 IR 65 IRL 65 IR 80 IRL 80 IR 100 IRL 100 Maximum

thermal capacity kcal / h 100.000 300.000 500.000 650.000 800.000 1.000.000

Incinerationcapacity

Sludge Oil * (l/h) Sewage Sludge (l/h) Solid Waste (kg/h)

--

25

15-

25

--

50

501450

--

80

802680

--

130

11028

130

--

150

13030

150

--

175

16035

175Multi Chamber

Design No No No Yes Yes Yes

Continuousloading door - Optional Optional Included Included Included

MainDimensions** L x W x H (mm) 1255x1015x1959 1780x1280x1820 1780x1280x1820 2530x1855x2190 2350x1855x2190 3458x1771x2261

Weight kg 1380 3150 3150 5850 5850 9150

* with 40 % water content ** for more information see detailed drawing

DEERBERG-SYSTEMS - MOLTKESTRASSE 6A � D-26122 OLDENBURGTEL: +49-(0)441-973 570 � FAX: +49-(0)441-777 337 - e-mail: info@deerberg-systems.de � www.deerberg-systems.de

PurposeThe purpose of the incinerator is toburn on board generated solid andliquid waste (IRL type only), in ac-cordance with Marpol/IMO rules.If there is no inci-nerator on board, solid waste has to be stored in adequate storage rooms, in order to be unloaded at port facilities.Using an inciner-ator instead, gives extra flexibility to ship-owners.All Deerberg in-

cinerators are IMO

type certified.

CapacityDeerberg offers incinerators with different thermal capacities (for additional technical specification see table below).

Advantages

Sludge oil and burnable waste do not have to be landed on shore

No costs for

discharging

sludge oil and

burnable waste

No additional storage facilities required on board

INCINERATOR

PURPOSEThe purpose of the incinerator is to burn the daily on board generated solid and liquid waste (IRL type only), in accordance with the Marpol / IMO-Rules.

IMO SPECIFIC REQUIREMENTSMarpol 73/78 Annex V limits the solid wastes materials that can be discharged to the sea and annex I prohibits any discharge of oily waste to the sea. In practical terms there are quantities of solid wastes that have to be stored onboard in adequate storage rooms to be unloaded at port facilities or alternatively an incinerator should be installed onboard. IMO requirements for incinerator plants installed onboard up to a capacity of 1500 kW are defined in Resolution MEPC76(40). This resolution gives detailed instructions for safety and controlfeatures, quantity control procedures, exhaust gas emissions, type tests and certifications.The incinerators are IMO type certified.

MAIN TECHNICAL DATA IR 10 IRL 10 IR 30 IRL 30 IR 50 IRL 50 IR 65 IRL 65 IR 80 IRL 80 IR 100 IRL 100 Maximum

thermal capacity kcal / h 100.000 300.000 500.000 650.000 800.000 1.000.000

Incinerationcapacity

Sludge Oil * (l/h) Sewage Sludge (l/h) Solid Waste (kg/h)

--

25

15-

25

--

50

501450

--

80

802680

--

130

11028

130

--

150

13030

150

--

175

16035

175Multi Chamber

Design No No No Yes Yes Yes

Continuousloading door - Optional Optional Included Included Included

MainDimensions** L x W x H (mm) 1255x1015x1959 1780x1280x1820 1780x1280x1820 2530x1855x2190 2350x1855x2190 3458x1771x2261

Weight kg 1380 3150 3150 5850 5850 9150

* with 40 % water content ** for more information see detailed drawing

DEERBERG-SYSTEMS - MOLTKESTRASSE 6A � D-26122 OLDENBURGTEL: +49-(0)441-973 570 � FAX: +49-(0)441-777 337 - e-mail: info@deerberg-systems.de � www.deerberg-systems.de

Deerberg Junior Incinerator

INCINERATOR

PURPOSEThe purpose of the incinerator is to burn the daily on board generated solid and liquid waste (IRL type only), in accordance with the Marpol / IMO-Rules.

IMO SPECIFIC REQUIREMENTSMarpol 73/78 Annex V limits the solid wastes materials that can be discharged to the sea and annex I prohibits any discharge of oily waste to the sea. In practical terms there are quantities of solid wastes that have to be stored onboard in adequate storage rooms to be unloaded at port facilities or alternatively an incinerator should be installed onboard. IMO requirements for incinerator plants installed onboard up to a capacity of 1500 kW are defined in Resolution MEPC76(40). This resolution gives detailed instructions for safety and controlfeatures, quantity control procedures, exhaust gas emissions, type tests and certifications.The incinerators are IMO type certified.

MAIN TECHNICAL DATA IR 10 IRL 10 IR 30 IRL 30 IR 50 IRL 50 IR 65 IRL 65 IR 80 IRL 80 IR 100 IRL 100 Maximum

thermal capacity kcal / h 100.000 300.000 500.000 650.000 800.000 1.000.000

Incinerationcapacity

Sludge Oil * (l/h) Sewage Sludge (l/h) Solid Waste (kg/h)

--

25

15-

25

--

50

501450

--

80

802680

--

130

11028

130

--

150

13030

150

--

175

16035

175Multi Chamber

Design No No No Yes Yes Yes

Continuousloading door - Optional Optional Included Included Included

MainDimensions** L x W x H (mm) 1255x1015x1959 1780x1280x1820 1780x1280x1820 2530x1855x2190 2350x1855x2190 3458x1771x2261

Weight kg 1380 3150 3150 5850 5850 9150

* with 40 % water content ** for more information see detailed drawing

DEERBERG-SYSTEMS - MOLTKESTRASSE 6A � D-26122 OLDENBURGTEL: +49-(0)441-973 570 � FAX: +49-(0)441-777 337 - e-mail: info@deerberg-systems.de � www.deerberg-systems.de

INCINERATOR

PURPOSEThe purpose of the incinerator is to burn the daily on board generated solid and liquid waste (IRL type only), in accordance with the Marpol / IMO-Rules.

IMO SPECIFIC REQUIREMENTSMarpol 73/78 Annex V limits the solid wastes materials that can be discharged to the sea and annex I prohibits any discharge of oily waste to the sea. In practical terms there are quantities of solid wastes that have to be stored onboard in adequate storage rooms to be unloaded at port facilities or alternatively an incinerator should be installed onboard. IMO requirements for incinerator plants installed onboard up to a capacity of 1500 kW are defined in Resolution MEPC76(40). This resolution gives detailed instructions for safety and controlfeatures, quantity control procedures, exhaust gas emissions, type tests and certifications.The incinerators are IMO type certified.

MAIN TECHNICAL DATA IR 10 IRL 10 IR 30 IRL 30 IR 50 IRL 50 IR 65 IRL 65 IR 80 IRL 80 IR 100 IRL 100 Maximum

thermal capacity kcal / h 100.000 300.000 500.000 650.000 800.000 1.000.000

Incinerationcapacity

Sludge Oil * (l/h) Sewage Sludge (l/h) Solid Waste (kg/h)

--

25

15-

25

--

50

501450

--

80

802680

--

130

11028

130

--

150

13030

150

--

175

16035

175Multi Chamber

Design No No No Yes Yes Yes

Continuousloading door - Optional Optional Included Included Included

MainDimensions** L x W x H (mm) 1255x1015x1959 1780x1280x1820 1780x1280x1820 2530x1855x2190 2350x1855x2190 3458x1771x2261

Weight kg 1380 3150 3150 5850 5850 9150

* with 40 % water content ** for more information see detailed drawing

DEERBERG-SYSTEMS - MOLTKESTRASSE 6A � D-26122 OLDENBURGTEL: +49-(0)441-973 570 � FAX: +49-(0)441-777 337 - e-mail: info@deerberg-systems.de � www.deerberg-systems.de

Waste Management - Integrated Solutions for Cargo Vessels

Solutions for Recycling

Ä

Solutions for Solid Waste