washer-sterilizers - microsoft
TRANSCRIPT
DOC. 274301.2/20.04.2012
SPA
PROCESSES
Sterilization
Washing Chemical bio-decontamination
Contamination control
Dense-phase fluids plants
SPECIAL APPLICATIONS
Rotating sterilizers
Pharmaceutical closures processing
COMPONENTS
Pressure vessels
Doors
Piping
Process controller
Wireless sensors
ACCESSORIES
Un/loading conveyors
Customized racks
fedegari.com
EN.1.2.1
Washer-Sterilizers
FOWS is not just a dual machine but an innovative multipurpose, flexible system capable of
operating in different modes and offering a cost-effective solution where both cleaning and/
or sterilization processes are needed.
It is capable of washing, decontaminating, sterilizing and
drying various types of loads in one single process or even
just single sub-processes as no traditional machine can
ever do.
FOWS brings in fact features and performances typical
of a steam sterilizer into a jet washer. It uses steam
for improving washing/degreasing performances and
vacuum for drying thus being a more environmental
friendly machine with lower energy consumption than any
traditional alternative.
Not only. FOWS uses the same Thema4 process controller as all other Fedegari machines.
Thema4 is the most complete, safest and most reliable process controller money can buy. Its
architecture, based on a comprehensive library of elementary process phases, allows the user to create, within minutes, complete new processes with the highest safety, wasting no time in designing fully customized cycles.
·Reduction of the number of installed machines
·Reduction of floorspace needed
·Reduction of total process time
·Reduction of installation, qualification, maintenance, revalidation and personnel training costs
·Simplification of procedures and process (it’s possible to develop and validate the entire process)
·Optimization of the production layout
·Optimization of material flows, by reducing cross-contamination risks
·Optimization of process data management (thanks to Thema4 process controller)
·Increased specific throughput
·Reduction of overall energy consumption
·Capability of removal of large masses of sticky ointments/creams
·The parts used in a clean room are processed and unloaded again in the same area
· Lower overall CAPEX
Washing and sterilization of:
· All types of containers
· Animal cages
· Machine parts (also some
pumps outside the machine)
· Flexible hoses
· Glassware
· Assorted components
Sterilization of:
· Everything (solids & liquids)
that is typically processed with
a steam sterilizer
Chemical decontamination
of:
· Temperature sensitive goods
(pass-through function)
Typical Application Fields Unique Advantages
CONTACT US:
ItalyFedegari Autoclavi SpASS 235 km 827100 Albuzzano (PV) T +39 0382 434111F +39 0382 434150E [email protected]
GermanyFedegari GmbHLehrer-Götz-Weg, 1181825 MunichT +49 89 42044920F +49 89 42044918E [email protected]
RussiaFedegari Autoclavi SpA
c/o Goldex Group14, Dorogobuzhskaya st bld.4121354 MoscowT +7 495 6453012F +7 495 6453012E [email protected]
SingaporeFedegari Asia Pte. Ltd.8, Boon Lay Way#03-16 - Tradehub 21609964 Singapore T +65 6 3164761F +65 6 8967365E [email protected]
SwitzerlandFedegari (Suisse) SAVia alla Gerra, 116930 BedanoT +41 91 9352090F +41 91 9352099E [email protected]
USAFedegari Technologies, Inc.174 N Main StreetSuite C3, PO Box 115018917 Dublin (PA) T +1 215 2499900F +1 215 2493427E [email protected]
fedegari.com
Highest Performances Thanks to Optimized Design
The integrated washing system is customized
for every application and requirement. Dedicated
washing racks allow to standardize each load thus
simplifying validation.
Fully customized washing racks can be designed
to meet any specific requirements. No matter how
challenging the task, there will never be a good
solution for every application because every load
has its unique peculiarities.
The core of FOWS washer-sterilizers is the washing
rack on which several spray nozzles are installed
for covering all load surfaces as well as the process
chamber.
The washing rack is connected to the water feeding
system through a sanitary maintenance-free auto-
coupling.
Detergents and additives in general are injected
in the water loop through a load cell-controlled
system for exact metering; steam impacting the
load through the same spray nozzles dramatically
improves cleaning performances often sparing the
need of additives.
To further improve washing performances an
innovative solution for rotating the load (based on
a water turbine) is available for those machines
where the load geometry allows to rotate the rack inside the process chamber.
All static and rotating spray nozzles have been custom designed for achieving the
highest sanitary features as well as washing performances.
Decontamination
For the most critical applications where the contaminants also represent a threat for the
safety of the operators (such as with citotoxic or high potency drugs) it is also possible to
decontaminate the load before washing for preventing harmful contaminants to be drained.
Static load
Rotating load
Washer-Sterilizers