wagenborg oilfield services

DRILLING TOOLS RENTALMACHINE SHOP SERVICES

CASING EXIT SYSTEMHARDFACING SOLUTIONS

DOWNHOLE SERVICES

WAGENBORG OILFIELD SERVICES

Wagenborg Oilfield Services LLC started in Russia in 2010. The head office of the company is located in Noyabrsk, western Siberia. Being a worldwide operating company and a part of Royal Wagenborg, Wagenborg Oilfield Services LLC is dedicated to provide services and equipment of high quality.

All Wagenborg Oilffield Services employees regardless of their position follow the rules and are compliant with the laws of the Russian Federation, as well as with the internal rules and company health and safety policy. We take care of the environment and do not allow any soil and air pollution by industrial waste.

We offer a wide variety of equipment and services for the oil and gas industry in whole of Russia.

1. Drilling tools rental• Double-acting hydraulic drilling jars• Tubulars (hwdp, drill pipe, drill collar)• Stabilizers, crossovers• Handling tools

2. API licensed machine shop• Threading of api connections• Crossovers manufacturing from steel aisi 4145h

mod qt• Special tools manufacturing

3. Casing exit system• Wagenborg wedgecut®• Engineering support

4. Hardfacing solution• Steel stabilizer redress

5. Downhole services• Fishing services with engineering support• Milling services with engineering support• Pipe recovery services (rct/ptc) with engineering

support• Power swivel with engineering support

EXPERIENCEDHIGH QHSE STANDARDS

FLEXIBLEMODERN EQUIPMENT

ACCURATE

WELCOME TOWAGENBORG OILFIELD SERVICES

WELCOME TOWAGENBORG OILFIELD SERVICES

ROYAL WAGENBORGINTEGRATED LOGISTICS

Wagenborg Oilfield Services is a member of Royal Wagenborg. Founded in 1898, the company continuously invests in various means of transport to serve the needs of a broad variety of customers by sea, shallow water and road, offering a complete chain of transport.

Wagenborg companies are involved in shipping, stevedoring, road transport, forwarding, warehousing, crane rental, heavy lifting, heavy transport, oil and gas related services, towage and passenger services.

Our integrated logistic solutions are flexible and reliable, provided by our dedicated crew of more than 3,500 employees. Royal Wagenborg has identified quality, health, safety and the environment as key factors.

Wagenborg Oilfield Services offers PD double acting drilling jars rentals and sales. These jars are proven to be one of the leading jars worldwide. PD jars can be used both as a single shock tool in the string and in assembly with the PD energizer and bumper sub. This type of jar does not have a silicone section which allows to use it much longer during operation.

We can guarantees jar operation for 350 circulation hours and 350 drilling hours in standard temperatures. The jar does not have any chromated or polished surfaces which makes it exceptionally damage resistant.

Wagenborg Oilfield Services is the only company in Russia which can offer a double acting drilling jar with OD 4 1/8” (105mm). This size is optimal for jobs in 5 3⁄4” (146mm) casing, because such jars are fishable in this size of casing.

Jarring UpTo jar up apply overpull at the jar as required and wait for jar to fire, lock will automatically release when lock setting load is exceeded. The more overpull applied on the jar, the greater impact will be achieved. To repeat jarring, reset jar into locked position by applying weight on the jar which then automatically will return to it’s locked position and again be ready to be fired up or down as

required. Jar lock load will have to be exceeded for the lock to release and hydraulics to be engaged. Overpull in excess of Max Pre-Jarring should not be applied as it may damage the hydraulics of the jar.

Jarring DownTo jar down, apply weight on the jar as required and wait for jar to fire, the lock will automatically release when lock setting load is exceeded. The more weight applied on the jar, the greater impact will be achieved. To repeat to jarring, reset jar into locked position by applying overpullat the jar which then automatically will return to it’s locked position and again be ready to be fired up or down as required. Jar lock load will have to be exceeded for lock to release and hydraulics to be engaged.

Energizer Up and Down OperationThe energizer will automatically be applied when opening the jar so fully concentrate on the loads applied on the jar and the energizer will adjust as required. The energizer will, when operated with the ‘PD’ Jar, increase acceleration of hammer weight between jar and energizer and thereby increase impacts. The impacts will also due to the two-stage design increase impacts in horizontal wells. This double action energizer will also minimize jarring shock loads on working string and topside equipment.

DOUBLE ACTION JARS

QUALITYSALES & RENTALUNIQUE IN RUSSIA

DOUBLE ACTION DRILLING JARS SALES, RENTAL AND SERVICES

DOUBLE ACTION DRILLING JARS SALES, RENTAL AND SERVICES PUMP FORCE TABLE

Pump pressure will generate a force, which will try to open the tool and thereby increase ease of opening jar lock and increase impact. For calculation please refer to Pump Force table. In horizontal wells the energizer will, due to the Pump Open Force and spring force, also assist in moving the BHA to maintain weight on bit.

The ‘PD’ Jar can be placed in the bottom hole assembly either in tension or compression but it is recommended that the jar is placed as close to any possible stuck point in order to achieve the highest impact where it counts. Ensure that sufficient weight (hammer weight) is placed above the jar for high impact.

The energizer should be placed above the jar hammer weight and with sufficient weight above the energizer in order to ensure high down jar impact. Never place jar or energizer at the neutral point in string as it may cause excessive wear and/or damage to the tools.

Never place tools at a transition point (i.e.between 8” (203mm) O.D. and 6 ½” (165mm) O.D. collars).

Never place jar next to or below a stabilizer, roller reamer or similar tool. Drill collars and/or pipe connection O.D. above the jar and immediate (1-2 joints) below the jar should never be larger than the O.D. of the jar.

For dual jar and energizer placement it is recommended that all notes on placement are considered and that the second jar should be placed higher up in the string again with sufficient hammer weight to fire up or down as required.

Beware that if weight below the jar is greater than lock setting of the jar, the lock may release to activate jar hydraulics when string is picked up. Jar can be delivered in open position with a clamp to eliminate this problem.

The ‘PD’ Drilling Jar and Drilling Energizer are a new generation of drilling tools designed and manufactured for the severe drilling conditions of today, such as severe directional and horizontal drilling conditions.

Ensuring secure and durable operation and providing high impact as and when required, regardless if in vertical, high angle or the horizontal section of the well. The ‘PD’ tools feature high strength steel, no chrome exposure either internal or external to drilling fluids or bore hole. Low internal friction due to design and use of low friction sealing arrangement.

Large internal diameter for high volume fluid passage has been achieved without sacrificing tool strength. High impacts even under low loads which can be increased considerably with the use of the two stage mechanical ‘PD’ Energizer. Also the Energizer will absorb shock waves tosurface and thereby limit damage to surface equipment.

DOUBLE ACTION DRILLING JARS SALES, RENTAL AND SERVICES

DOUBLE ACTION JARS

QUALITYSALES & RENTALUNIQUE IN RUSSIA

DOUBLE ACTION DRILLING JARS SALES, RENTAL AND SERVICES JAR CHARACTERISTICS

TOOL SIZE NOMINAL 4 1/8’’ 4 3/4’’ 6 1/2’’ 8’’ 9 1/2’’

Lock setting up

lbstons

20-250009-11

35-3500013.5-16

60-8000027-36

70-9000032-41

80-10000032-45

lbstons

8-120003.5-5.5

10-180004.5-8

25-3300011-15

30-4000013.5-18

30-4500013.5-20

Hydraulic delay up

35000 lbs19 tons 1-2 min


100000 lbs45.5 tons 1-2 min 1-2 min 1-2 min

Delay at max overpull up 10-30 sec 10-40 sec 10-50 sec 10-50 sec 10-50 sec

Hydraulic delay down


30000 lbs13.5 tons 2-3 min 2-3 min 2-3 min 2-3 min 2-3 min

40000 lbs23 tons 1-2 min 1-2 min 1-2 min 1-2 min 1-2 min

100000 lbs45.5 tons 40-60 sec 40-60 sec 40-60 sec

PD JAR & ENERGIZER SERIES

414 1/8’’

474 3/4’’

656 1/2’’

808’’

959 1/2’’

Tool size OD inches 4.20 4.94 6.64 8.17 9.69

Bore ID 1.56’’ 2.25’’ 2.56’’ 3.00’’ 3.25’’

Overpull max lbs 75000 90000 180000 280000 410000

Tensile load lbs 323280 402740 921000 1564000 2014000

Yield torque ft/lbs 12990 17700 58400 112800 162300

P.O.A. sq. in. 8.30 11.79 19.64 29.47 41.29

Overall stroke (inch) 18 20 20 20 20

Max temp F/C standard 275/132 275/132 275/132 275/132 275/132

Max temp F/C high 450/232 450/232 450/232 450/232 450/232

Max drilling hrs up to 275F 350 350 350 350 350

Max drilling hrs up to 400F 200 200 200 200 200

Length approx m/ft 5.2/17 6.7/22 6.7/22 6.7/22 6.7/22

Wight approx kg/lbs 290/620 400/880 820/1800 1350-2970 1900/4180

Please note that all above loads and time delays are approximate only.

Wagenborg Oilfield Services provides drill stem repair and manufacturing of drilling tools:• Cutting and repairing of API threaded

connections (Internal Flush, Full Hole, American Open Hole, Regular, External Flush, EUE, NUE, ACME, STUB ACME etc.)

• Manufacturing of drill stem elements from Steel Grade 4145H MOD by API Spec. 7, API Spec. 5CT, GOST requirements.

• Manufacturing of specialized equipment

We employ highly qualified specialists, our lathe operators have more than 20 years of experience in working with drilling and production equipment.

All our products go through quality control – inspection, which consists of visual inspection and magnetic particle testing.

All our threads are cuprum coated and tool joint compounds are applied in accordance with customer requirements (Z-50,Z-50 Arctic Grade, KOPR KOTE Arctic Grade are available) and thereby increase impacts. The impacts will also due to the two-stage design increase impacts in horizontal wells. This double action energizer will also minimize jarring shock loads on working string and topside equipment.

Lathe works are performed by CNC lathe machines and lathe machines with hydrocopier devices. The spindle drift ID of the CNC machines is 10 1/4” (260mm) and of the machine with hydrocopier devices - 12” (304.8mm).

It is impossible to cut a thread on a universal lathe machine with the quality and speed provided by the automated CNC machines. For example it takes 7 minutes to cut a thread NC50 with the spindle rotation of 400 rpm. Thus we achieve minimum surface roughness and precise dimensions of the tool.

All our metal cutting tools are purchased from internationalsuppliers, such as Sandvik, Vargus, Iscar, Waverley Cutting Tools etc., which guarantees excellent quality thanks to advanced metalworking technology.

WORKSHOPEXPERIENCED OPERATORS

FLEXIBLEHIGH QHSE STANDARDSMODERN EQUIPMENT

ACCURATE

API LICENSED MACHINE SHOP

Our lathe operators have more than 20 years of experience in working with drilling and production equipment.

API LICENSED MACHINE SHOP

120 TON ARCTICPOWER SWIVELSThe Power Swivels are built in Houston, USA specially for arctic weather conditions. All the power swivel parts and units are placed in a container carrier serving as a ini- workshop. The container has a heating system and control panel can be placed outside for convenience.

Power swivels are widely used for casing exits, sidetracking, downhole fishing, workover, and other jobs worldwide. High pressure hydraulic oil pump is activated by reliable and proven Caterpillar diesel engine. All the fluids in the machine are specially selected for use in cold northern conditions. Together with power swivels we provide engineering support.

Power swivel operator-mechanic is responsible for uninterrupted operation of the units and for availability of diesel fuel for the pump drive.

The WedgeCut® Whipstock System is one of the advanced solutions of Wagenborg Oilfield Services. The system consists of:• Whip face with a setting anchor• One mill for casing exit cutting and gauging

The innovative part of the system is the anchor setting mechanism and the shape of the mill. The anchor is set mechanically by shearing a slip set pin. When the load is applied to the whip face the set pin is sheared, a spring releases and pushes the slip up, the slip is wedged between the whipstock and casing. However the setting system is designed in such a way that in case of unforeseen circumstances, such as wrong cement plug, bridge plug of whipstock placement interval selection the whipstock can be pulled up and set at a higher interval.

The whipstock can also be activated against the bottomhole and then pulled up and set at a higher interval, this being the case no cement bridge or bridge plug is required.

When the anchor is set the mill activating pin is sheared. Then casing milling and casing exit cutting begins. The whip face has a special guide block which together with the tapered section of the mill leads the mill’s cutting structure in the right direction to cut the casing exit and prevent its interference with the surface of the whip face.

This feature prevents the whip face from damage and allows to use it more than once.

Besides the guide block has the shape of an inverted taperand thus can serve as a hook for lifting the whip stock. Which means that the whip stock can be hooked with the head of the mill even after the mill activating pin is sheared and the mill is no longer attached to the whipstock.

The mill itself is design to comprise a window mill, secondary and watermelon mill in one tool. Such design significantly lowers the cost for manufacturing or redressing and consequently customer expenses.

The WedgeCut® system major characteristics:• One trip casing exit cutting system• Can be placed higher up after setting• Can be oriented at any time• 2 angle• Retrievable• Backup Feature to retrieve if the shear bolt is broken

INNOVATIVEADVANCED SOLUTION

QUALITY

WEDGECUT® CASING EXIT SYSTEM

The WedgeCut® Whipstock System is one of the advanced solutions of Wagenborg Oilfield Services.

WEDGECUT® CASING EXIT SYSTEM

FISHING SERVICES

We employ specialists who are fully experienced in all aspects of Workovers and Drilling Operations such as:• Packer milling and retrieving (all types and sizes)• Bridge plugs milling and retrieving• Recover liners• Fishing (open and cased hole)• Recovery of lost and stuck pipe, junk, lost tools• Milling Casing, tubing, junk, cement milling,

dressing fish necks, downhole restrictions

Equipment list• Bumper SuBs• Die Collars• Ditch Magnets• Drive Subs• Cutters• Fishing Jars• Fishing Magnets• Impression Blocks• Intensifiers• Junk Baskets• Junk Subs

• Mills (all types)• Overshots• Releasing Spears• Reverse Circulating Junk

Basket• Rotary Shoes• Rope Spear• Safety Joints• Taper Taps• Washpipe

Whenever the Stabilizer has worn down to anunacceptable diameter, it can be reconditionedto full gauge by the Wagenborg Oilfield Services Stabilizer Redress Shop.

Welding and Brazing Equipment installed in theStabilizer Redress Shop provides the capabilityto perform all types of welding and brazing aswell as modifications and repair to Oilfield tools and equipment.

Hard-Facing of blades is based on:• Variety of Tungsten Carbide• Matrix Hardness and ability to hold the maximum of

Carbide

Hard-Facing of Blades is achieved by using one of thefollowing methods:• HF1000 - Crushed Tungsten Carbide• HF2000 - Trapezoidal Tungsten Carbide• HF3000 - Tungsten Carbide Inserts

The Wagenborg Oilfield Stabilizer Redress Shop is able to redress up to 18” diameter.

Full Quality Control Procedures are maintained throughoutthe repairing process. HardFacing techniques have been developed to take full count on the chemical composition of the material and the repeated redressing without damage.Temperature Control of the body during the pre-heat process and throughout the complete redressing procedure. All information obtained during the process is recorded in the Wagenborg Oilfield Services Stabilizer Redress Shop Card.

Redressed Stabilizers are:• 100% Body Gauged• 100% Magnetic Particle Inspection (MPI), or Ultrasonic

Inspected on all critical areas

HIGH QHSE STANDARDS

ACCURATE MODERN EQUIPMENT

STABILIZER REDRESS

Phase 1

Phase 2

Phase 3

STABILIZER REDRESS


Hard-Facing of blades is based on:

Variety of Tungsten Carbide Matrix Hardness and ability to hold the maximum of Carbide

Hard-Facing of Blades is achieved by using one of the following methods:

HF1000 - Crushed Tungsten Carbide HF2000 - Trapezoidal Tungsten Carbide HF3000 - Tungsten Carbide Inserts

The WAGENBORG Oilfield Stabilizer Redress Shop is able to redress up to 18” diameter.

Full Quality Control Procedures are maintained throughout the repairing process.

HardFacing techniques have been developed to take full count on the chemical composition of the material and the repeated redressing without damage.

Temperature Control of the body during the pre-heat process and throughout the complete redressing procedure.

All information obtained during the process is recorded in the WAGENBORG OILFIELD SERVICES Stabilizer Redress Shop Card.

Redressed Stabilizers are:

100% Body Gauged 100% Magnetic Particle Inspection (MPI), or Ultrasonic Inspected on all critical areas

HF 1000

HF 2000

HF 3000

STABILIZER REDRESS













HF 1000

HF 2000

HF 3000

STABILIZER REDRESS













HF 1000

HF 2000

HF 3000

STABILIZER REDRESS

DRILLING AND HANDLINGTOOLS RENTALWAGENBORG OILFIELD SERVICES offers a wide variety and different sizes of drilling and handling tools rental. The tools are manufactured by our international partners in compliance with API standards:• G-105, S-135 Drill Pipes• Heavy Weight Drill Pipes• Slick and spiral Drill Collars• Elevators for Drill Pipe and Drill Collars, center

latch, bottleneck, side door• Slips for Drill Collars• Bowls for slips• Rotary hand slips• Safety clamps Type “T” & Type “C”• Manual Tongs

All the tools pass quality control and inspection according to API and DS-1 specifications.

HF 1000

HF 2000

HF 3000

The oil and gas industry is filled with environmental and mechanical conditions that can adversely affect your everyday operations, costing you time and money. In many cases traditional solutions, readily available from industry service companies, are the answer. Then there are those conditions that require specialized expertise and equipment to keep your well alive.

With a global footprint and years of experience in pipe recovery, we can now provide the industry with the latest Radial Cutting Torch, or RCT™ tool system services. These enabling tools and associated services address the pipe recovery needs of major oil and gas producers, coiled tubing operators, and fishing service companies as no others on the market. RCT tool systems are certified radio safe and non-explosive. They are not classified as explosives or traditional hazardous materials and require no special storage or handling. Finally, a user-safe alternative to conventional cutting methods!

Cutting NPT, costs and safety concernsWe continuously strive to deliver value to our clients through research and development and offering a range of modern products. RCT systems are one of the solutions we employ to deliver value to your investment. Global Transportation classification allows transport of the RCT systems on public carriers, saving costs associated with the specialized trucking and cargo requirements of chemical and explosive-type cutters. For the client, this advantage translates to reduced non-productive time.

Benefits• RCT systems are all non-explosive• RCT systems are available as hazmat or non-hazmat

rated*• RCT systems operate in temperatures to 500˚ F (260˚ C)• RCT systems operate in pressures to 20,000 psi (137.9

Mpa)• RCT systems uses no explosives, detonators or igniters• RCT systems require no special offshore transportation• RCT systems require no special container systems• RCT systems are certified radio safe• RCT systems utilize MCR’s non-explosive, non-hazmat

THERMAL GENERATOR™ activator• RCT tool cuts will not flare or swell the target pipe• No complicated fish job

We understand the importance of personnel liability to operators. That’s reason enough to make the RCT system your first choice for cutting pipe.

Cutting the pipeThe versatility of RCT systems makes them a logical choice for any tubular cutting need. Whatever the cutting conditions—high bottom hole pressures, restricted tubular access, or even the most routine, we have the RCT system to get the job done. RCT tools are designed specifically to cut standard and heavy-wall tubular, including conventional grades, stainless, high-chrome and exotic alloys, quickly, leaving a clean fish up hole. RCT systems are available from 3/4- to 7-in. diameters for cutting tubular sizes from 1 to 9-7/8 in.

RADIAL CUTTING TORCH TECHNOLOGY FROM MCR OIL TOOLS LLC®

ENGINEERINGEXPERIENCED CREWS


ACCURATE

RADIAL CUTTING TORCH TECHNOLOGY FROM MCR OIL TOOLS LLC®

MCR® and MCR Oil Tools® are registered trade names of MCR Oil Tools, LLC

RCT systems can be conveyed using wireline, slick line, coiled tubing or drill string. The included anchor system holds the tool in place during activation and cutting, ensuring a clean and complete cut. The slim design of the tool lets you cut in close-contact conditions, highly deviated wells and scaled pipe. RCT tools are proven to operate with greater standoff. With their small diameters, the tools can pass through, and cut below, tubular restrictions as no other cutter can on the market.

RCT system operation begins when an electrical current passes through the conveyance medium to a contact sub. The contact sub provides current to the THERMAL GENERATOR™ activator which heats a resistor to a temperature that causes the initial burn that activates the primary fuel load. Highly energized plasma is produced, exits thru the nozzle ports and severs the target pipe in drilling, completion and production scenarios, within wellbore temperatures up to 500° F and pressures up to 20,000 PSI. The torch system is retrievable and has no special disposal requirements.

*RCT-SP is non-hazmat rated systems currently available.

ADVANTAGES OF THE RCT OVER JET & CHEMICAL CUTTERS• Not an explosive or dangerous chemical• Classified as a Flammable Solid, Organic, NOS., UN1325

Class 4.1*• No special storage, handling, or disposal problems• Operates in temperatures to 500˚ F (260˚ C)• Operates in pressures to 20,000 psi (137.9 Mpa)• Many Deployment options available to meet client requirements• Cuts all steel, high chrome, heavy wall and plastic coated

tubulars• Cuts produce no flaring or swelling of the target pipe• Can be run thru restrictions to cut larger diameter pipe• Can be used in close contact pipe conditions• Cuts in dry pipe conditions, exotic fluids or drilling mud• Pressure Balance Anchor system eliminates movement,

slipping, or sticking problems associated with other anchors• Pressure Balance Anchor also eliminates the problems

associated with going thru restrictions and operating in larger diameters below the restriction, because it has no moving parts

• The complete system is safe to use in Radio Sensitive areas such as offshore platforms or drill ships without going into Radio Silence resulting in significant savings in rig time

Case study: A job required the cutting of 1 1/4-in high-pressure coiled tubing stuck in 2 3/8-in., 5.95-lb/ft tubing. Bottom hole temperature was 345 F, and bottom hole pressure was 11,800 PSI. After four days of failed attempts with conventional cutters, the client called for assistance. The 7/8-in. HP RCT tool was selected and successfully cut the pipe in the first run. The RCT system provides access through those tubular restrictions that conventional chemical cutters and severing tools cannot.

People are at the heart of Wagenborg Oilfield Services as our employees make our solutions possible. Often this is done in changing and challenging circumstances. That is why we supply our employees with the best PPE, equipment and working methods. It enables them to deal responsibly with occupational risks.

We encourage safety awareness at every level in the company - from office to our workshop. A strong safety culture contributes to our goal. That goal is to have all our employees return home safely after a working day. We pursue an active policy to prevent accidents and absence due to illness. Together with our clients we continuously strive to optimize working methods and improve safety.

Quality is another important aspect in our company. Royal Wagenborg’s slogan ‘Sign of Solutions’ revolves around this - using the qualities of our employees in the best possible way, resulting in top-level solutions that meet the requirements of our customers.

This allows us to provide first-class services, for which we always have and will be known.

Apart from the human aspect, the environment is also regarded as an important issue. We execute our activities worldwide with respect for the environment. We recognize our responsibility to ensure our activities have as little impact on the environment as possible.

In September 2014, Wagenborg Oilfield Services, confirmed the compliance of the quality management system (QMS) and threading requirements with the new version of the specification of the American Petroleum Institute (API) Specification Q1, Ed.9 and API Specification 7-1.

In the course of the audit the implementation of eighty new requirements of specification API Spec Q1 were attested. The 9th edition includes new requirements regarding the safe production by analyzing the potential risks at each stage of the production cycle. The new conditions also apply to providing a more detailed analysis of production and expansion of non-compliance requirements for supplier evaluation.

ENGINEERINGEXPERIENCED CREWS


ACCURATE

QUALITY, HEALTH,SAFETY & ENVIRONMENT

We encourage safety awareness at every level in the company - from office to our workshop.

QUALITY, HEALTH,SAFETY & ENVIRONMENT OUR CERTIFICATES

API auditors noted the work undertaken in terms of risk management in the field of quality, a high level of readiness of the enterprise to the audit, the professional approach of senior management in the organization processes. As a result, API affirmed the right of organization to use API monogram on its products made according to specification API Spec 7-1.

DPM-DS Connections

Certificate of conformity

NDT Laboratory

API 7-1

ISO 9001

ISO 9001

API Q1

IQNet

MISSION & STRATEGYOUR MISSION AND MOTTO IS “WE FIND SOLUTIONS!”

Our Objectives and Strategy

Basing on the concepts of Royal Wagenborg, guided by the values of the company and meeting the challenges facing us, we are committed to:

• gain and maintain the leading position in providing safe, effective and high quality solutions in the fields of drilling and servicing or workover of the wells;

• grow our business for providing a wider range of integrated solutions on new markets.

OUR VALUES HONESTY we are honest, fair and reliable in our dealings with customers and employees.

QUALITY we take full responsibility for the results of our work and ensure customer satisfaction.

TEAM we attract, train and motivate the best employees, showing respect and encouraging open communication.

HEALTH, SAFETY AND ENVIRONMENT our priority - to ensure safety of work, maintaining the health of workers and the environment.

OUR MISSION Providing consumers with products and services in accordance with their needs and quality standards

Developing reliable and efficient solutions for our customers

Increasing in production volumes

Satisfying society requests through the creation of new positions, development of personnel and protection of the environment.

WAGENBORG OILFIELD SERVICES629800, Russian FederationYamalo-Nenetskiy autonomous district Noyabrsk,Promzona, Panel 8T +7 3496 354842F +7 3496 354852

460027, Russian FederationOrenburg region, Orenburg,Donguzskaya street 58/2T +73532913161F +73532913162

E [email protected]

www.wagenborg.ru

ROYAL WAGENBORGP.O. Box 14, 9930 AA DelfzijlMarktstraat 10, 9934 CK Delfzijl The Netherlands

T +31(0)596 636 911E [email protected]

wagenborg oilfield services

Documents