w nas3 owners manual ver 0 1 170821...

W NAS3All In One Network Attached Storage Server

Owner’s Manual

SAFETY!!

Disconnect power cords by pulling the plug, not the cable.

Do not attempt any repairs. Do not remove the unit’s chassis cover without specific authorization from Waversa Systems Inc.

Keep all cables away from heat sources.

Ensure there is plenty of free space around and above the unit.

Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.

When the unit is moved from a cold to a warm environment, allow sufficient time for any condensation to evaporate before plugging the NAS3 into an AC connection.

CLEANING

Chassis:

Use only a soft, lint-free cloth dampened slightly with water only to clean the faceplate and chassis. Any ammonia or alcohol based cleaners may stain or mar the polished aluminum surface of the NAS3.

Connectors:

You may use any good quality contact cleaner recommended for such applications to clean the contacts from time to time, as you deem appropriate.

W NAS3 Owner’s Manual 01

CONTENTS

§ KEY FEATURES OF W NAS3

§ FRONT&REAR PANEL

§ INPUT SOURCE

§ DISPLAY

§ MENU

§ QUICK SETTING/ STORAGE

§ NETWORK CONNECTION

§ W NAS3


W NAS3 KEY FEATURES

• NETWORK AUDIO• DLNA, Roon, AirPlay

• USB • UAC 2.0 COMPATIBLE

• DIGITAL OUTPUT• Coaxial, AES/EBU

• AUTOMATIC MEMORY PLAY - CDT/CDP• Ripping and Playback• Playback ripped file on cache drive

• EXTERNAL USB DAC• WAP AUDIO PROCESSING• HEADPHONE VOLUME CONTNROL VIA REMOTE

CONTROLLER• SABRE ES9038PRO • FULL DISCRETE ANALOGUE OUTPUT BUFFER• FULL DISCRETE HEADPHONE AMPLIFIER• 5 BAY 2.5Inch Storage


* During initial operation with CD, NAS3 produces motor noise till ripping completed.

* Caution : Use proper signal cable otherwise analogue output buffer can be damaged due to its low impedance level.

Front Panel

① Power Switch② IR remote sensor③ LCD Screen④ CD Slot⑤ Keys⑥ Headphone Output


Rear Panel

1. 2 x XLR Output2. FM Antenna3. 3 x RCA Output4. 5 x 2.5 Inch HDD Bay5. SD Card slot6. Ethernet7. 2x USB A8. 1 x USB B9. Coaxial Input10. Optical input11. AES/EBU Input12. Coaxial Output13. 2x AES/EBU Output14. AC Power


INPUT

• Network AUdio• DLNA• ROON• AirPlay

• USB Audio• Coaxial• Optical• AES/EBU• CD


OUTPUT

• Balanced • Unbalanced• Coaxial • AES/EBU • Headphone

STORAGE

• 5x 2.5 Inch HDD/SSD Bay• External USB

User Interface

• 7 Inch LCD Screen• 8x Front button

• Open, Play, Pause, Prev, Next, Source, Menu, • Select

• IR Remote controller

Operation

• Open – Eject CD • Play – Play CD • Pause – Stop CD • Prev – Previous CD track• Next – Next CD track• Source – Change source• Menu - Change function• Select – Select Menu


Source

• DLNA• Controllable through DLNA client

application(Mobile App)• ROON

• ROON Application• USB

• USB Audio • AES

• SPDIF Input(XLR)• COAX

• SPDIF Input (RCA)• OPT

• SPDIF (Optical)• CD

• CD Player

DISPLAY- STATUS SIGNAL : CD

① Source : CD② RATE : Basic ▶ Changed Sampling rate ③ Title / Player④ TRACK : Total number of track / Play track⑤ TIME : Current played time⑥ DISK : Total disk time⑦ TRACK : Current track time⑧ SIGNAL PATH

• DLNA or ROON : Input music source• I2S : Basic sampling rate• WAP : WAVERSA AUDIO PROCESOR

Upsampling frequency rate• DAC : DAC chipset• DOUT : Digital output frequency• PHONES or LINE : Headphone or Output

mode (Phones mode appears on with Headphone input)

• Volume : Headphone volume level 0~63 (Use Remote controller)


※ CD track number turns to blue when ripping completed

DISPLAY- STATUS SIGNAL : DLNA ORROON

① Source : DLNA or ROON② Rate : Basic ▶ Upsampling rate ③ Title / Player④ SIGNAL PATH

• DLNA or ROON : Input music source• I2S : Basic sampling rate• WAP : WAVERSA AUDIO PROCESOR



• Volume : Headphone volume level 0~63 (Use Remote controller)


DISPLAY- STATUS FM RADIO

① Source : FM RADIO② Rate : Basic ▶ Changed Sampling rate ③ PRESET : Memory for Tuned Radio Frequency④ STATION : Received Signal Intensity(dBuV)⑤ SIGNAL PATH

• FM : PCM • I2S : 44.1• WAP : WAVERSA AUDIO PROCESOR



• Volume : Headphone volume level 0~63 (Use Remote controller

※ Radio frequency & Preset to be changed with Selectbutton


DISPLAY- STATUS DISK

① DISK USED 1 ~ 4 : 2.5” HDD slots for NAS3 storage (Play available

through DLNA application)5 : Cache HDD for ripping and play

(Designated storage for CD ripping)

• STORAGE RESCANIf the HDD status does not display proper HDD storage , press STORAGE RESCAN to reset the status.


※ To cache(memory) play, insert ripping CD again. During cache play, CD motor is not running. Cache play is recommended to listen enhanced sound quality.

※ Do not put CD which is unauthorized for ripping. It comes with ripping lock code which can cause system error.

MENU

• RES – Resolution for analog output• BYPASS – bypass original sample rate• 1X – 44.1/48• 2X – 88.2/96• 4X – 176.4/192• 8X – 352.8/384

• DOUT – Coaxial, AES/EBU Output • BYPASS – bypass original sample rate• 1X – 44.1/48• 2X – 88.2/96• 4X – 176.4/192

• CONV• NONE – bypass original input• DSD – CONVERT PCM INPUT TO DSD

• DCONV• NONE – DEFAULT• F1 – 50KHz• F2 – 60KHz• F3 – 70KHz

• LEVEL – Analogue output gain level• 25%• 50%• 75%• 100%

• DISP –LCD Brightness control• Level range from 1 – 8 • STATUS DISK

• STORAGE – Rescan storage• CD – CD PLAY / RIPPING

• FAST READOUT – FAST RIPPING • SLOW READOUT – SLOW RIPPING• ACCURATE READ – ACCURATE RIPPING

• USBPGM – USB FW UPGRADE MODE• TITLE ON/OFF – DISPLAY TITLE


NAS3 QUICK SETTING

NAS3 is controllable via web quick setting page. Type http://wnas3/ to Browser or http:// IP address.


MEDIA RENDERER CONTROL

MEDIA SERVER- DISPLAY DISK INFORMATION, MEDIA SERVER CONTROL ,DISK FORMAT※ Cached music to be saved into SLOT5. In case of HDD5 is in full, move the files into slot 1~4.


REMOTE CONTROLLER MODE

NAS3 QUICK SETTING

FW UpdateSometimes for specific reasons, firmware will be updated though web.Press Update 2times and wait until Update success is displayed.It may takes couple of minutes.Do not turn off the system during update mode, otherwise system fw can be damaged.


NAS3 QUICK SETTING

NETWORK SETTING 1.

W NAS3 supports standard DLNA


NETWORK play is consisted of home network device, DMR, DMC, DMS.

• DMR (Digital Media Renderer) : Music playback• DMC (Digital Media Controller) : Smart phone , Smart pad• DMS (Digital Media Server) : Music storage

W NAS3 incorporates DMR & DMS into system. Connect it into home network device (AP) and play by smart phone or smart pad. Install supported DLNA application into your smart phone and play music.

NETWORK SETTING 2.

Available mobile application supporting DLNA

• Android : Bubble UPNP , mconnect, etc• IOS : Bubble UPNP , mconnect, etc


How to use

1. Select player (Renderer)2. Select music library (NAS ,smart phone,etc)3. Play

Music file copy into internal disk

Type \\WNAS3 into windows file explorer. Or type \\ IP address .• ID : root• Password : root

※ Ripped file to be saved into slot5


Each disk has separate folder

W NAS3 specification


Digital input

Digital output

Analogue output

Storage

Line voltage

Size

Weight

Ethernet, USB, Coaxial, Optical, AES/EBU

2 x XLR - Balanced 2 x RCA - Unbalanced

5x 2.5 inch HDD/SDD BayExternal USB Storage

90~240 VAC @ 50Hz/60HzVoltage selectable inside manually

40 Watt

W 440 x L 330 x H 150

Ethernet, USB, Coaxial, AES/EBU

10Kg

w nas3 owners manual ver 0 1 170821...

Documents