w data sheet: tytan rh1 - schrack technik...

2
PAGE 1/2 DATA SHEET: RH1_E / 07-2011 Errors and omissions excepted. SCHRACK TECHNIK GMBH Seybelgasse 13, A - 1230 Vienna, PHONE +43 1/866 85-0 E-MAIL [email protected], INTERNET www.schrack.com CONNECTING COMPETENCE. W SCHRACK-INFO D0-disconnectors with modern electronic monitoring W DATA SHEET: TYTAN RH1 Fuse blown Unit overheat Load disconnector ON Ready for operation W TECHNICAL DATA Classification Load disconnector with fuse Regulation / determination DIN VDE 0638 DIN EN 60947-3; IEC 947-3 Suited for D0-fuses DIN 49522 D01; 2, 4, 6, 10, 13, 16 A with reducing feather D02: 20, 25, 32, 35, 40, 50, 63 A Suited for cylindrical fuses IEC EN 60269-1 10x38 mm: 2 ... 32A with reducing feather Suited for sleeves fit inserts DIN 49523 DO2: 2, 4, 6, 10, 16, 20, 25, 35, 50 A Number of poles 3-pole, 3-pole+N Insulating parts Plastic, halogen-, phosphorus-, silicon-free Class fire / tracking UL94/V0, glow wire 960 °C / CTI600 Protection / touch protection IP20 / finger and back of hand proof Ambient temperature, storage min / max -25 °C / 60 °C Rated operating voltage U e 400 V Rated operating current I e 63 A Rated uninterrupted current I e 63 A Rated short circuit breaking capacity I cm 50kA eff Switching category AC 22B Overvoltage category IV (DIN VDE 0110) Pollution degree 3 (DIN VDE 0110) Rated impulse withstand voltage U imp 6000 V Connection technology Edelstahlbuchsenklemme 1,5...35 mm² Tightening torque M D 4 Nm

Upload: others

Post on 25-May-2020

12 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: W DATA SHEET: TYTAN RH1 - Schrack Technik Internationalimage.schrack.com/datenblaetter/h_is504858--_en.pdf · DATA SHEET: RH1_E / 07-2011 Errors and omissions excepted. SCHRACK TECHNIK

PAGE 1/2

DATA SHEET: RH1_E / 07-2011Errors and omissions excepted.

SCHRACK TECHNIK GMBH

Seybelgasse 13, A - 1230 Vienna, PHONE +43 1/866 85-0E-MAIL [email protected], INTERNET www.schrack.com

CONNECTING COMPETENCE.

W SCHRACK-INFO• D0-disconnectors with modern electronic monitoring

W DATA SHEET: TYTAN RH1

Fuse blown Unit overheat

Load disconnector ON Ready for operation

W TECHNICAL DATAClassification Load disconnector with fuse

Regulation / determination DIN VDE 0638

DIN EN 60947-3; IEC 947-3

Suited for D0-fuses DIN 49522 D01; 2, 4, 6, 10, 13, 16 A with reducing feather

D02: 20, 25, 32, 35, 40, 50, 63 A

Suited for cylindrical fuses IEC EN 60269-1 10x38 mm: 2 ... 32A with reducing feather

Suited for sleeves fit inserts DIN 49523 DO2: 2, 4, 6, 10, 16, 20, 25, 35, 50 A

Number of poles 3-pole, 3-pole+N

Insulating parts Plastic, halogen-, phosphorus-, silicon-free

Class fire / tracking UL94/V0, glow wire 960 °C / CTI600

Protection / touch protection IP20 / finger and back of hand proof

Ambient temperature, storage min / max -25 °C / 60 °C

Rated operating voltage Ue 400 V�

Rated operating current Ie 63 A

Rated uninterrupted current Ie 63 A

Rated short circuit breaking capacity Icm 50kAeff

Switching category AC 22B

Overvoltage category IV (DIN VDE 0110)

Pollution degree 3 (DIN VDE 0110)

Rated impulse withstand voltage Uimp 6000 V

Connection technology Edelstahlbuchsenklemme 1,5...35 mm²

Tightening torque MD 4 Nm

Page 2: W DATA SHEET: TYTAN RH1 - Schrack Technik Internationalimage.schrack.com/datenblaetter/h_is504858--_en.pdf · DATA SHEET: RH1_E / 07-2011 Errors and omissions excepted. SCHRACK TECHNIK

CONNECTING COMPETENCE.

PAGE 2/2

DATA SHEET: RH1_E / 07-2011Errors and omissions excepted.

SCHRACK TECHNIK GMBH

Seybelgasse 13, A - 1230 Vienna, PHONE +43 1/866 85-0E-MAIL [email protected], INTERNET www.schrack.com

TYTAN RH1

W DIMENSIONS AND DIAGRAMS

DESCRIPTION ORDER NO.

3-POLE

TYTAN RH1 main protection disconnectors D02 with integrated electronics and monitoring LEDs IS504858