vsp3305 upgrading to vmware esxi 5.0
DESCRIPTION
VSP3305 Upgrading to VMware ESXi 5.0 . Name, Title, Company. Disclaimer. This session may contain product features that are currently under development. - PowerPoint PPT PresentationTRANSCRIPT
VSP3305Upgrading to VMware ESXi 5.0
Name, Title, Company
2
Disclaimer
This session may contain product features that are currently under development.
This session/overview of the new technology represents no commitment from VMware to deliver these features in any generally available product.
Features are subject to change, and must not be included in contracts, purchase orders, or sales agreements of any kind.
Technical feasibility and market demand will affect final delivery.
Pricing and packaging for any new technologies or features discussed or presented have not been determined.
3
Agenda Convergence ESXi Architecture Upgrade Requirements and Limitations Upgrade Tips Upgrade Overview Post Upgrade Considerations Summary
4
Convergence
vSphere 5.0 is the first release to offer only the ESXi hypervisor• Service console no longer exists
• ESXi Shell / ESXCLI for local CLI administration• vCLI / PowerCLI for remote CLI administration
• Small, light-weight, secure, dual-image architecture
• Good news! In-place upgrades from both ESX and ESXi 4.x
vCenter Server 5.0
ESXi 5.0ESX/ESXi 4.x
5
Convergence Cont.
Migrating from ESX 4.x to ESXi 5.0• In-place migration using either ESXi Installer or Update Manager
• Automatically detects ESX 4.x and performs upgrade• Is sensitive to boot disk partition layout – requirements discussed later
• During the migration:• Boot disk is repartitioned to match ESXi.• The host configuration preserved (most of it )
• The boot disk VMFS volume is preserved
6
Convergence Cont.
Migrating from ESX 4.x to ESXi 5.0• Considerations prior to migrating an ESX 4.x host to ESXi 5.0:
• Replace/deprecate agents/scripts running in the Service Console• Agents: most vendors provide ESXi compatible agents (run in management VM)
• Leverage API to access/manage/monitor the ESXi host (agentless)
• Scripts: Deprecate unneeded scripts or convert to vCLI / PowerCLI
• Use ESXi Image Builder CLI to add 3rd party software components to your ESXi Image (i.e. custom drivers, CIM providers)
7
Convergence Cont.
Upgrading from ESXi 4.x to ESXi 5.0• In-place upgrades from ESXi 4.x to ESXi 5.0 using ESXi Installer or
Update Manager
• Same architecture = minimal change:• Existing ESXi 4.x boot disk partitions kept.
• Host configuration preserved (state.tgz)• Boot disk VMFS volume preserved
• Contents of the boot disk replaced with ESXi 5.0
8
Agenda Convergence ESXi Architecture Upgrade Requirements and Limitations Upgrade Tips Upgrade Overview Post Upgrade Considerations Summary
9
ESXi Architecture
ESXi uses a dual-image architecture• “Dual-image” Approach allows for falling back to last known good copy
ESXi laid out on 1GB partition• Uses 1st GB of the boot disk – VMFS must fall after the 1GB mark to be kept
Separate 4GB “scratch” partition created • 1GB + 4GB = 5GB. Hence minimum supported disk size = 5GB
BootLoader (4MB)
Boot Bank A(250MB)
Core DumpPartition(110MB)
Boot Bank B(250MB)
StorePartition(286MB)
I1
~1GB
Boot BanksCore
dumpsVMware
Tools ISOs
10
ESXi Architecture Cont.
The ESXi Dual-Image architecture in action
BootLoader (4MB)
Boot Bank A(250MB)
Core DumpPartition(110MB)
Boot Bank B(250MB)
StorePartition(286MB)
I1
Host running Image: I1
11
ESXi Architecture Cont.
The ESXi Dual-Image architecture in action (cont.)
BootLoader (4MB)
Boot Bank A(250MB)
Core DumpPartition(110MB)
Boot Bank B(250MB)
StorePartition(286MB)
I1
New Image/Update
Host running Image: I2
BootLoader (4MB)
Boot Bank A(250MB)
Core DumpPartition(110MB)
Boot Bank B(250MB)
StorePartition(286MB)
I1 I2
Host running Image: I1
12
ESXi Architecture Cont.
The ESXi Dual-Image architecture in action (cont.)
BootLoader (4MB)
Boot Bank A(250MB)
Core DumpPartition(110MB)
Boot Bank B(250MB)
StorePartition(286MB)
I1
Host running Image: I1
BootLoader (4MB)
Boot Bank A(250MB)
Core DumpPartition(110MB)
Boot Bank B(250MB)
StorePartition(286MB)
I2
Shift + R on boot
Host running Image: I1
I1 Revert
Host running Image: I2
BootLoader (4MB)
Boot Bank A(250MB)
Core DumpPartition(110MB)
Boot Bank B(250MB)
StorePartition(286MB)
I1 I2
I2
13
Agenda Convergence ESXi Architecture Upgrade Requirements and Limitations Upgrade Tips Upgrade Overview Post Upgrade Considerations Summary
14
Requirements and Limitations
Migrating/Upgrading to ESXi 5.0 requires:• 64-bit Hardware
• vCenter, ESXi, Update Manager all require 64-bit hardware/OS
• vCenter 5.0• vCenter 5.0 can manage ESXi 5.0, ESX/ESXi, and ESX/ESXi 3.x• ESX/ESXi 3.5 requires legacy license server
• Host must be running ESX/ESXi 4.x• Upgrade 3.5 hosts to 4.x first, and then to 5.x
• In-place upgrade only• Must use the same 4.x boot disk, no provision for switching boot disk
• Fresh 5.0 install required to change boot device (i.e. from local disk to SAN)
Hosts must meet storage and disk partitioning requirements!
15
Requirements and Limitations Cont.
Boot disk requirements • ESX/ESXi hosts must have 50MB
available on boot disk VMFS (store host configuration)
• ESX hosts migrated using Update Manager also require 350MB free in “/boot”
• VMFS volume must fall after sector 1843200 (i.e. after the 1st GB)• 1st GB used for ESXi partition
ESX 4.0 Default Disk Partitions
Disk partitioning is usually only an issue for ESX hosts when a custom disk partitioning layout has been used
16
How to verify your ESX Host disk partitions are compatible:
Step 1: From vSphere Client verify the ESX host at least a 1GB /boot partition
17
How to verify your ESX Host disk partitions are compatible:
Step 2: From ESX Shell run “# fdsik –ul” to verify the VMFS partition starts after sector 1843200 (after the 1GB mark)
18
Requirements and Limitations Cont.
There is no automated “rollback” capability• Applies to upgrades from ESX and ESXi• To recover from a failed upgrade, reinstall 4.x and restore configuration
Upgraded host maintain legacy MBR• Still limited to boot disk < 2TB
19
Requirements and Limitations Cont.
Preserving the host configuration• Most ESX/ESXi host configuration preserved, but not all
• Service console port group removed, NICs converted to VMkernel NICs
• Information not applicable to ESXi is not preserved• /etc/sysconfig/mouse or /etc/sudoers
• Custom configuration files in the Service Console are not preserved• Scripts added to /etc/rc.d.
• Ruleset files and customized firewall rules are not preserved
• Information in custom disk partitions is not preserved
• Local users and groups are not migrated
Refer to the ESXi 5.0 Upgrade Guide, Chapter 6 (page 70) for a comprehensive list of ESX/ESXi settings that are preserved
20
Requirements and Limitations Cont.
3rd Party software components are not carried forward• Software installed on the host that is not part of the ESXi 5.0 Image
(i.e. drivers, CIM Providers)
• Option 1: Reinstall after the upgrade
• Option 2: add the package/VIB to the ESXi image using the Image Builder CLI
21
Agenda Convergence ESXi Architecture Upgrade Requirements and Limitations Upgrade Tips Upgrade Overview Post Upgrade Considerations Summary
22
Upgrade Tips
Always backup your host configuration before upgrading• ESX
• Back up files in /etc (/etc/passwd, /etc/groups, /etc/shadow, and /etc/gshadow)• Back up any custom scripts• Back up your .vmx files
• Back up local images, such as templates, exported virtual machines, and .iso files
• ESXi• From the vSphere CLI, run the vicfg-cfgbackup command with the -s flag to save the
host configuration to a specified backup filename
~# vicfg-cfgbackup --server <ESXi-host-ip> --portnumber <port_number> --protocol <protocol_type> --username username --password <password> -s <backup-filename>
• From PowerCLI
C:\> Get-VMHost MyHost | Get-VMHostFirmware -BackupConfiguration –DestinationPath c:\backup\
23
Upgrade Tips Cont.
Leverage advanced vSphere features• Features like HA, DRS, vMotion, Storage vMotion can help with the upgrade
• Free 60-day trail provides access all features following vCenter install/upgrade
Upgrade with no VM downtime• Migrate VMs on shared storage to other hosts (vMotion)
• Migrate VMs on local storage to shared storage (Storage vMotion)
Use Host Profiles• Standardize host configuration and eliminate configuration errors
Place hosts in a vSphere Cluster• Rolling upgrades are supported
• You can mix ESX/ESXi 3.5, 4.x and ESXi 5.0 hosts in the same cluster• Watch your VMware Tools, Virtual Hardware and VMFS Versions
24
vSphere 5.0 Licenses
Obtaining your vSphere 5.0 Licenses• Customers with active Support and Subscription contract (SnS) are entitled to
upgrade to vSphere 5.0 at no cost• Logon to support website and accept new EULA to access license keys• vSphere 5.0 License, Pricing and Packaging white paper
• http://www.vmware.com/files/pdf/vsphere_pricing.pdf
• vSphere Upgrade Center
• http://www.vmware.com/products/vsphere/upgrade-center/licensing.html
• vSphere License Advisor• http://www.vmware.com/products/datacenter-virtualization/vsphere/upgrade-center/
vsphere-license-validator-script.html
25
Agenda Convergence ESXi Architecture Upgrade Requirements and Limitations Upgrade Tips Upgrade Overview Post Upgrade Considerations Summary
26
Migrate to vSphere 5 in 4 Steps
Supported Paths• Upgrade/Migrate from ESX (“Classic”) 4.x and ESXi 4.x
• Pre-4.x hosts will have to be upgraded to 4.x first
Configuration Preserved Each phase is independent of the others• VMware Tools, Virtual Hardware, VMFS upgrades recommended,
but not required
• VMware Tools 5.0 supported on ESX/ESXi 4.x
Phase 2Upgrade to
ESXi
Phase 3Upgrade
VMs
Phase 4Upgrade
VMFS
Phase 1Upgrade vCenter
27
Upgrade Overview
Migration/Upgrade Method ESX 3.5* ESX/
ESXi 4.x Use Case
Use vSphere Update Manager X
For sites that already use vCenter Server and Update Manager
Interactively use the ESXi installer X For a small number
of hostsPerform a scripted migration/upgrade X For an efficient way to
deploy multiple hosts
Perform a new installation X XFor upgrading ESX 3.5 hosts, or for use in your own custom upgrade plan
* ESX/ESXi 3.5 hosts can be upgraded to version 4.x first, then upgraded to ESXi 5.0.
28
Upgrade Overview Cont.
Upgrade experience is the same for both ESX and ESXi• Same procedures/tools
• Same look and feel
Under the covers the upgrade• ESX
• Host scanned for upgrade eligibility (using scripts copied to host)• Disk is repartitioned• Sensitive to disk partition layout
• Scratch directory vs. partition
• ESXi• Host scanned for upgrade eligibility (using scripts copied to host)
• Existing disk partition kept but contents overwritten• Less sensitive to disk layout• Scratch partition vs. directory
29
“ESX” Host Upgrade Overview
Steps to upgrade an ESX 4.x host to ESXi 5.0
If you don’t get the option to upgrade, verify:• 350MB free in /boot (for Update Manager only)
• 50MB free in the boot disk datastore
• VMFS volume is at the end of the disk (after sector 1843200)
Determine eligibilityHost incompatible
Fresh installHost settings lost
Local VMFS destroyed
Host compatibleConfig Saved
Repartition boot diskUpgrade to ESXi 5.0
Config Restored
30
“ESX” Host Upgrade Overview Cont.
ESX boot disk repartitioned to align with ESXi Data on VMFS volume will be preserved Instead of a scratch partition, a 4GB VMFS directory is used
• Only applies to ESX host upgraded to ESXi
• ESXi hosts retain scratch partition
/boot core VMFS
extended
MB VMFS
extended
storecoreBank 1 Bank 2
Before:
After:
Preserved
scratch
31
“ESXi” Host Upgrade Overview
Steps to upgrade an ESXi 4.x host to ESXi 5.0
Note key difference between upgrading from ESX vs. ESXi• ESX host’s boot disk is repartitioned, ESXi host’s boot disk is not
• ESX host will have a scratch volume, ESXi host will have a scratch partition
Determine eligibilityHost incompatible
Fresh installHost settings lost
Local VMFS destroyed
Host compatibleConfig Saved
Upgrade to ESXi 5.0Config Restored
32
“ESXi” Disk Partitioning
Boot disk is not repartitioned during ESXi upgrade Data on VMFS volume will be preserved Dedicated scratch partition preserved
Before:
After:
Same disk partitioning used
MB scratch VMFS
extended
storecoreBank 1 Bank 2
MB scratch VMFS
extended
storecoreBank 1 Bank 2
33
Lopsided Boot Banks
When the ESXi boot banks are difference sizes
Occurs in ESXi hosts upgraded from 3.5 to 4.x• In ESXi 3.5 boot banks = 48MB
• In ESXi 4.x/5.0 boot banks = 250MB
Only an issue for an ESXi 3.5 host upgraded to 4.x then directly to 5.0
MB scratch VMFS
extendedstorecoreBank 2Bank 1
48MB 250MB
free
34
Choosing Your Upgrade Path
Which upgrade method should you use?Running vCenter 5.0
Host on 32-bit or Incompatible HardwareReplace Server
Host on 64-bit Compatible HardwareHost Running ESX/ESXi 3.5
Upgrade to 4.x
Host Running ESX/ESXi 4.xNon-Upgradable Boot Disk
New 5.0 Install
Upgradable Boot DiskUpgrade to 5.0 using Update
Manager
Upgrade to 5.0 using ESXi Installer
35
Agenda Convergence ESXi Architecture Upgrade Requirements and Limitations Upgrade Tips Upgrade Overview Post Upgrade Considerations Summary
36
Post Migration Considerations
Active Directory• Join ESXi host to Active Directory
• vSphere Client• Select the host and choose
Configuration -> Authentication Services -> Properties
• vCLI• Use “vicfg-authconfig” command
• See the ESXi Configuration Guide, Chapter 13
37
Post Upgrade Considerations Cont.
Implement the ESXi Dump and VMware Syslog Collector
38
Post Upgrade Considerations Cont.
Scratch Partition• ESXi scratch pad (used to store log files, dump files, etc)
• 4GB (default)• Local storage (default)
• In some situations scratch partition may not be created during upgrade• SAS disk• USB/SD
• No local disks
• It’s good to verify the scratch partition is going to a persistent datastore following the upgrade
When upgrading ESX hosts scratch directory used in lieu of scratch partition
39
Post Upgrade Considerations Cont.
ESXi Shell• Rebranded Tech Support Mode• Local and remote (SSH)
vCLI• ESXCLI Command Set
• Local and remote CLI• New and improved in 5.0
• ‘vicfg-*’ Command Set• Remote CLI Only
• Other Commands:• vmware-cmd, vmkfstools, etc.
• vCLI available for Linux and Windows
vMA• vCLI Appliance
PowerCLI• Windows CLI Tool
ESXi Shell vCLI
vMA PowerCLI
40
Post Upgrade Considerations Cont.
1. ‘esxcfg’ commands deprecated in 5.0 (replaced with esxcli)
2. ‘esxcli’ in 4.x is *not* backward compatible with 5.0
3. ‘vicfg’ used for remote CLI only
Commands Run Local Run Remote ESX/ESXi 4.x ESXi 5.x
esxcfg1 Yes No Yes No
esxcli2 Yes Yes No Yes
vicfg3 No Yes Yes Yes
vmware-cmd Yes Yes Yes Yes
vmkfstools Yes Yes Yes Yes
PowerCLI No Yes Yes Yes
41
Upgrading Virtual Machines
Upgrading VMware Tools, virtual hardware and VMFS optional Provides flexibility to upgrade environment in phased manner
1. ESXi 5.0 supports upgrading Virtual Hardware version 3 and later
Feature ESX/ESXi 4.x ESXi 5.x
VMware Tools 4.x Yes Yes
VMware Tools 5.x Yes Yes
VMFS-3 Yes Yes
VMFS-5 No Yes
Virtual Hardware1 3, 4, 7 4, 7, 8
42
VMware Tools
VMware Tools upgrade optional following ESXi 5.0 upgrade VMware Tools 5.0 supported on both ESX/ESXi 4.x and 5.x Recommended – needed to benefit from latest improvements
VMware Tools Version 3.x, 4.x, 5.0VMware Tools
3.xIncompatible with vSphere 5.0Must Upgrade
VMware Tools 4.xCompatible with vSphere 5.0Upgrade
OptionalVMware Tools
5.0Compatible with vSphere 5.0Backward Compatbile with vSphere
4.x
43
Virtual Machine Hardware Version
Upgrade VMware Tools first ESXi 5.0 supports Virtual Hardware versions 4, 7, or 8
• Must upgrade version 3
Virtual Hardware version 8 cannot run on ESX/ESXi 4.x Do not upgrade VM Virtual Hardware until all hosts are at ESXi 5.0Current virtual hardware version 3, 4, 7, 8
Virtual Hardware Version 3
Incompatible with vSphere 5.0Must
UpgradeVirtual Hardware Version
4, 7Compatible with vSphere 5.0
Upgrade Optional
Virtual Hardware Version 8
Compatible with vSphere 5.0Not Backward Compatbile with vSphere
4.x
44
VMFS Version
Upgrading to VMFS-5 is optional ESXi 5.0 supports VMFS versions 3.x and 5.0 VMFS-5 volumes are not accessible by ESX/ESXi 4.x hosts Recommended to benefit from latest 5.0 features
VMFS 3.x / 5.0
VMFS-3
ESXi 3.x / ESXi 4.x / ESXi 5.0
Upgrade Optional / Recommended
VMFS-5
ESXi 5.0VMFS-5 cannot be accessed by 4.x
hosts
45
Agenda Convergence ESXi Architecture Upgrade Requirements and Limitations Upgrade Tips Upgrade Overview Post Upgrade Considerations Summary
46
Summary
vSphere 5.0 is ESXi only In-place upgrade from ESXi 4.x In-place migration from ESX 4.x
• Specific boot disk requirements must be met
Host configuration preserved• Few exceptions – firewall rules, local users/groups
VMFS partition preserved• Must be at the end of the boot disk (after sector 1843200)
Upgrading VM components optional• VMware Tools, Virtual Hardware
Upgrading VFMS optional/recommended• In-place non-disruptive upgrade (but not backward compatible)
47
Summary
Things to watch for:• ESX hosts with custom boot disk partitioning (non-default)
• ESXi hosts upgraded from 3.5 -> 4.x (lopsided boot partitions)
• Custom firewall rule sets
• 3rd Party Software
Recommendations• Use HA/DRS
• DRS in fully automated mode
• Keep VMs on shared storage• Use Storage vMotion/vMotion
• Setup an ESXi Management VM• PowerCLI
• vCLI/vMA
• Use Image Builder CLI to add 3rd party components
48
ESXi Info Center: http://www.vmware.com/products/vsphere/esxi-and-esx/index.html
http://blogs.vmware.com/esxi
@VMwareESXi
49
Upgrading Example
Upgrading using the ESXi 5.0 Installer
50
When to Use the ESXi Installer to Upgrade
Upgrade small number of hosts Each host upgraded individually Interactive upgraded • Can be scripted
Use when ESXi host has lopsided boot banks
51
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
52
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
53
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
54
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
55
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
56
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
57
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
58
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
59
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
60
ESX 4.x -> ESXi 5.0 Installer Upgrade Example
Maintenance Mode Boot ESXi 5.0 Select Boot Disk F1 to Verify Disk Choose
Migrate/Preserve VMFS
Confirm 3rd Party Software Warning
Confirm upgrade Reboot Host Reconnect Host Test/Verify
61
Upgrading Example
Upgrading using vSphere 5.0 Update Manager
62
When to Use The Update Manager to Upgrade
Advantages:• Upgrade an individual host or entire cluster
• Unattended/Fully Automated
• Upgrade Manager is cluster aware• Works with DRS and HA admission Control to patch optimal number of
hosts concurrently
• Rolls the upgrade through the cluster
User determines behavior for: • Disabling FT/HA/DRS during upgrade
• Migrate vs. suspend vs. power off VMs
63
ESX 4.x -> ESXi 5.0 Update Manager Example
Import ESXi Image Create baseline Attach baseline Scan host/cluster Review Scan
Details Remediate Confirm 3rd Party
Software Warning Test/Validate
64
ESX 4.x -> ESXi 5.0 Update Manager Example
Import ESXi Image Create baseline Attach baseline Scan host/cluster Review Scan
Details Remediate Confirm 3rd Party
Software Warning Test/Validate
65
ESX 4.x -> ESXi 5.0 Update Manager Example
Import ESXi Image Create baseline Attach baseline Scan host/cluster Review Scan
Details Remediate Confirm 3rd Party
Software Warning Test/Validate
66
ESX 4.x -> ESXi 5.0 Update Manager Example
Import ESXi Image Create baseline Attach baseline Scan host/cluster Review Scan
Details Remediate Confirm 3rd Party
Software Warning Test/Validate
67
ESX 4.x -> ESXi 5.0 Update Manager Example
Import ESXi Image Create baseline Attach baseline Scan host/cluster Review Scan
Details Remediate Confirm 3rd Party
Software Warning Test/Validate
68
ESX 4.x -> ESXi 5.0 Update Manager Example
Import ESXi Image Create baseline Attach baseline Scan host/cluster Review Scan
Details Remediate Confirm 3rd Party
Software Warning Test/Validate
69
ESX 4.x -> ESXi 5.0 Update Manager Example
Import ESXi Image Create baseline Attach baseline Scan host/cluster Review Scan
Details Remediate Confirm 3rd Party
Software Warning Test/Validate
70
ESX 4.x -> ESXi 5.0 Update Manager Example
Import ESXi Image Create baseline Attach baseline Scan host/cluster Review Scan
Details Remediate Confirm 3rd Party
Software Warning Test/Verify
71
ESXi Info Center: http://www.vmware.com/products/vsphere/esxi-and-esx/index.html
http://blogs.vmware.com/esxi
@VMwareESXi