VSAT Conversion to Dedicated Circuit

***Please note this is a conditional estimate ONLY and is not a guarantee on pricing. Equipment and services must be determined on a case by case basis according to site specific requirements. ***

The information outlined below represents the DPS recommended minimum requirements for establishing a dedicated circuit connection to the DPS TLE Network

Hardware: $15,000.00 (OTC ) estimate

Network Router, Cisco 4331 w/switch module: Cisco 4331 IPBase K9 APP K9 SEC K9 NIM 2MFT T1/E1 POE SM-X-ES3-24-P

UPS Battery Backup: $2150.00 (OTC) estimate

Tripplite SU2200XLa (Tower) or Tripplite SU2200RTXL2Ua (Rack Mount) Rack mount requires 2POSTRMKITHD Either requires a NEMA 5-20R input outlet

Circuit: Primary Option

Metro Ethernet, ME 10/10, 10mb circuit $874.16 (monthly) estimate Note: ME not available in all areas

Secondary Option AVPN NxT1 4.5mb $1154.64 (monthly) estimate Current satellite bandwidth is appx 6mb outbound and 5mb Inbound but shared between 800+ users. A dedicated 10mb circuit would give you 10mb all to yourself in/out.

Document Revised 07/19/2021

Additional Agency Site Cost Considerations:

Telecom Room / area for wall or floor mounted telecom rack Ethernet cabling for user connections HVAC for cooling network equipment Dedicated electrical outlet for UPS Circuit installation prerequisites ( 110v power/wall space with 4x4 ¾ inch ply-board / electrical ground bar)

DPS Contact Info: Mark Sifuentes mark.sifuentes@dps.texas.gov 512-424-7629

Note: DPS is not financially responsible for circuit installation costs or monthly reoccurring costs associated with the circuit.

Document Revised 07/19/2021