volvo 200 series datasheet section 2e; d20 and d24 engines

11
Section 2 D 20, D 24 Engines Group 20 General Performance, compression Other general data D 20 D 24

Upload: 2bjorn

Post on 17-Nov-2014

224 views

Category:

Documents


4 download

DESCRIPTION

Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines, Workshop Manual.

TRANSCRIPT

Page 1: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines

Section 2 D 20, D 24 Engines

Group 20 General

Performance, compression

Other general data

D 20 D 24

Page 2: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines

Group 21 Engine block

Page 3: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines
Page 4: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines

Adjustment washers available in sizes from 3.00 to 4.25 in intervals of 0.05 mm.

Page 5: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines
Page 6: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines
Page 7: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines
Page 8: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines

Group 22 Lubrication system

Page 9: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines

Group 23 Fuel system

* USA / Canada 1982-

Page 10: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines
Page 11: Volvo 200 Series DataSheet Section 2e; D20 and D24 Engines

Group 26 Cooling system

General

Use Genuine Volvo green coolant, type C, diluted 50/50 with clean water. This

mixture helps prevent corrosion and damage by freezing.

Never top up with only water. Use Genuine Volvo coolant diluted 50/50 with clean water.

The coolant does not normally need to be changed. In the case of major repairs requiringthe draining of the coolant, fresh coolant must be used since the drained coolant will havebeen subjected to oxidation and will contain dirt particles.

Flush the cooling system when changing the coolant.Use flushing agent P/N 11 61 328-8.

early type

Drive belts

Tightening torque