volutherm flash pasteurizer centering head exchange · 2016-12-20 · over the batch (vat)...
TRANSCRIPT
Centering Head Exchange
bwcontainersystems.com
Features
Volutherm Flash Pasteurizer
• Compact design
• Automatic CIP/SIP - guaranteed repeatability
• Fully integrated controls
• Pressure balance system
• Continuous status and process alarms
• Designed to ensure gentle product handling
• Great than 90% energy recovery
• Process records and charting
• Capable of utilizing operating platforms to match customer preference
CBI Fleetwood
bwcontainersystems.com
Features
Volumix (Blender)
• Vacuum deaeration with CO2 sweep gas
• Water and syrup flow controls loops
• 2 stream liquid blending
• Product carbonation
• Greater syrup yields
• Reduced CO2 and water consumption
• Shorter changeover time
• Skid mounted minimizes installation time and cost
• Graphical user interface (customizable)
• Stainless steel construction
• Fully integrated mixer and filler CIP systems reduce cleaning times
• Fully automated operation
• Recipe based product selection
CBI-Fleetwood
bwcontainersystems.com
Features
Volutherm Flash Pasteurizer
• Compact design
• Automatic CIP/SIP - guaranteed repeatability
• Fully integrated controls
• Pressure balance system
• Continuous status and process alarms
• Designed to ensure gentle product handling
• Great than 90% energy recovery
• Process records and charting
• Capable of utilizing operating platforms to match customer preference
CBI Fleetwood
F7/13-15 Forrester St, Kingsgrove NSW 2208www.barry-wehmiller.com.au
p. +61 (0) 2 9150 7055 e. [email protected]
BW Container Systems1305 Lakeview Drive
Romeoville, IL 60446 USA
t. +1 (630) 759-6800
bwcontainersystems.com
For our European office, contact:Plumtree Farm Industrial Estate,Bircotes, DoncasterSouth Yorkshire DN11 8EW ENGLANDt. +44 (0) 1302 711056
Page 2 Heading
BW Container Systems’ Clean-in-Place (CIP) Systems are fully automatic systems designed to thoroughly clean and disinfect associated equipment and its supply lines.
CIP is accomplished with the system supplying cleaning solutions, internals are flooded or sprayed with cleaning solutions and mechanical scrubbing action for movement of cleaning solutions.
Parameters for validating CIP functions such as: temperature of CIP solution, strength of CIP solution, pressure through the lines and tanks, flow rate and time of contact can be detected and reported. These parameter checks are also used to ensure each cycle has been completed successfully before advancing to the next cycle.
CIP systems can be 1, 2 or the water efficient 3 tank system. Hot, ambient or combined systems are available and use caustics, acids and sterilants to clean process equipment which includes mix and hold tanks, transfer lines, blenders, flash pasteurizers, carbonators, fillers and raw ingredient tanks.
Contact our experienced sales teams today for a comprehensive review of your application(s) and to see how our Clean-in-Place (CIP) Systems can benefit your company.
BW Container Systems1305 Lakeview Drive
Romeoville, IL 60446 USA
t. +1 (630) 759-6800
bwcontainersystems.com
Clean-in-Place (CIP) Systems
3 tank CIP Set
2 tank CIP Set
BW Container Systems1305 Lakeview Drive
Romeoville, IL 60446 USA
t. +1 (630) 759-6800
bwcontainersystems.com
For our European office, contact:Plumtree Farm Industrial Estate,Bircotes, DoncasterSouth Yorkshire DN11 8EW ENGLANDt. +44 (0) 1302 711056
Page 2 Heading
BW Container Systems1305 Lakeview Drive
Romeoville, IL 60446 USA
t. +1 (630) 759-6800
bwcontainersystems.com
Volutherm Flash Pasteurizer
The Volutherm Flash Pasteurizer, manufactured by BW Container Systems, offers highly accurate, constant PU (pasteurization units) control while allowing a variable flow rate to match downstream product demand. The Volutherm, developed for the brewery and beverage market, can also be utilized in many aspects for the packaging market and offers clients continuous and consistent pasteurization for their products.
The pasteurization process is one of the most important unit operations in beverage processing. Continuous pasteurization has numerous advantages over the batch (vat) pasteurization method, such as time, hygiene and cost of operations - energy savings. The Volutherm Series Flash Pasteurizer utilizes a high-temperature, short-time (HTST) method for most continuous pasteurization processes. The heat treatment can be achieved using either a plate heat exchanger (PHE) or a tubular heat exchanger depending upon the product being pasteurized. The capacity range for the Volutherm is 10gpm to 300gpm.
The Volutherm automatically calculates the required temperature and holding time needed for pasteurization from the desired PU value entered by the operator. The pressure in the holding tube is controlled to ensure that dissolved gas stays in the solution.
The PLC control system optimizes the production process to ensure the continuous quality of the final product, and the fully automated operation in both production and CIP/SIP modes means the unit needs little operator intervention.
A digital, paperless process logger records the key actual process temperatures, pressures and flow rate values. These records are stored securely and may be accessed remotely in real time or on a batch basis.
Available Options:• Sterile buffer tank with product/water interface detection• Integrated CIP/SIP system• Integrated trim carbonator• Enhanced regeneration capability > 90% efficiency• Choice of process valve types and control systems• Complete system integration package - Controls/Communications/
Systems HMI Graphics
Contact our experienced sales teams today for a comprehensive review of your application(s) and to see how our Volutherm Flash Pasteurizer can benefit your company.