voice quality monitoring report (sip...

1 © Panasonic Corporation 2016

Voice Quality Monitoring Report

(SIP Publish)

Jun 23, 2016

Ver.1.0

Panasonic Corporation

(KX-TGP600/HDVseries)

No.06-007


This document describes about Voice Quality Monitoring Report (SIP publish).

Abstract about this document

Revision history

Date Version Revision Firmware version

Jun 7,2016 Ver. 1.0 Initial Release All versions



1.Abstract

Voice Quality Monitoring Report (VQMR) is a remote monitoring feature for QoS

of voice communication.

It compliant to RFC3611 and RFC6035.

VQMR is transported to Collector with SIP Publish method.

RTP

VQMR(SIP Publish)

Collector



2. Report type

There are 3 types of report.

(1) Session report (Final report)

VQREPORT_SEND=“1”

Report is sent when the session of each call is terminated .

(2) Interval report


Report is sent periodically with the interval specified with RTCP_INTVL

while call is alive.

(5-65535 second)

Report is sent when the session of each call is terminated too.

(3)Alert report


a) Critical

ALERT_REPORT_TRIGGER=“1”




while call is alive and listening MOSQ or one way delay is over the threshold.

(5-65535 second)

Threshold

ALERT_REPORT_MOSQ_CRITICAL（Specified with 10 times of MOSQ）

ALERT_REPORT_DELAY_CRITICAL（Specified with millisecond, 0-2000）

a) Warning

ALERT_REPORT_TRIGGER=“0”


while call is alive and listening MOSQ or one way delay is over threshold.

(5-65535 seconds)

Threshold

ALERT_REPORT_MOSQ_WARNING（Specified with 10 times of MOSQ）

ALERT_REPORT_DELAY_WARNING（Specified with milisecond, 0-2000）



Number Item Support

1 Call Term Y

2 SessionInfo Y

2.1 CallID Y

2.2 LocalID Y

2.3 RemoteID Y

2.4 OrigID Y

2.5 LocalAddr Y

2.6 RemoteAddr Y

2.7 LocalGroupID Y

2.8 RemoteGroupID Y

2.9 LocalMacAddr N

2.10 RemoteMacAddr N

3 LocalMetrics Y

3.1 TimeStamps Y

3.2 SessionDescription Y

3. Report item

(1) Session report (Final report)

Number Item Support

3.2.1 PayloadType Y

3.2.2 PayloadDesc Y

3.2.3 Samplerate Y

3.2.4 PacketPerSecond Y

3.2.5 FrameDuration Y

3.2.6 FrameOctets Y

3.2.7 FramesPerPacket Y

3.2.8 FmtpOptions Y

3.2.9 PacketLossConcealment Y

3.2.10 SilenceSuppressionState Y

3.3 JitterBuffer Y

3.3.1 JitterBufferAdaptive Y

3.3.2 JitterBufferRate Y

3.3.3 JitterBufferNominal Y

3.3.4 JitterBufferMax Y



Number Item Support

3.3.5 JitterBufferAbsMax Y

3.4 PaketLoss Y

3.4.1 NetworkPacketLossRate Y

3.4.2 JitterBufferDiscardRate Y

3.5 BurstGapLoss Y

3.5.1 BurstLossDensity Y

3.5.2 BurstDuration Y

3.5.3 GapLossDensity Y

3.5.4 GapDuration Y

3.5.5 MinimumGapThreshold Y

3.6 Delay Y

3.6.1 RoundTripDelay N

3.6.2 EndSystemDelay Y

3.6.3 OneWayDelay N

3.6.4 SymmOneWayDelay N

3.6.5 InterarrivalJitter N

3.6.6 MeanAbsoluteJitter N

Number Item Support

3.7 Signal Y

3.7.1 SignalLevel Y

3.7.2 NoiseLevel Y

3.7.3 ResidualEchoReturnLoss Y

3.8 QualityEstimates Y

3.8.1 ListeningQualityR Y

3.8.2 RLQEstAlg N

3.8.3 ConversationalQualityR N

3.8.4 RCQEstAlg N

3.8.5 ExternalR-In Y

3.8.6 ExtRInEstAlg N

3.8.7 ExternalR-Out N

3.8.8 ExtROutEstAlg N

3.8.9 MOS-LQ Y

3.8.10 MOSLQEstAlg N

3.8.11 MOS-CQ Y

3.8.12 MOSCQEstAlg N



Number Item Support

3.8.13 QoEEstAlg N

4 RemoteMetrics N

5 Dialog N

Number Item Support

4.5 LocalAddr Y

4.6 RemoteAddr Y

4.7 LocalGroupID Y

4.8 RemoteGroupID Y

4.9 LocalMacAddr N

4.10 RemoteMacAddr N

5 LocalMetrics Y

5.1 TimeStamps Y

5.2 SessionDescription Y

5.2.1 PayloadType Y

5.2.2 PayloadDesc Y

5.2.3 Samplerate Y

5.2.4 PacketPerSecond Y

5.2.5 FrameDuration Y

5.2.6 FrameOctets Y

5.2.7 FramesPerPacket Y

5.2.8 FmtpOptions Y

(2) Interval report

It is same as Session report

(3) Alert report

Number Item Support

1 MetricType Y

2 Direction Y

3 Severity Y

4 SessionInfo Y

4.1 CallID Y

4.2 LocalID Y

4.3 RemoteID Y

4.4 OrigID Y



Number Item Support

5.2.9 PacketLossConcealment Y

5.2.10 SilenceSuppressionState Y

5.3 JitterBuffer Y

5.3.1 JitterBufferAdaptive Y

5.3.2 JitterBufferRate Y

5.3.3 JitterBufferNominal Y

5.3.4 JitterBufferMax Y

5.3.5 JitterBufferAbsMax Y

5.4 PaketLoss Y

5.4.1 NetworkPacketLossRate Y

5.4.2 JitterBufferDiscardRate Y

5.5 BurstGapLoss Y

5.5.1 BurstLossDensity Y

5.5.2 BurstDuration Y

5.5.3 GapLossDensity N

5.5.4 GapDuration N

5.5.5 MinimumGapThreshold N

Number Item Support

5.6 Delay Y

5.6.1 RoundTripDelay N

5.6.2 EndSystemDelay Y

5.6.3 OneWayDelay N

5.6.4 SymmOneWayDelay N

5.6.5 InterarrivalJitter N

5.6.6 MeanAbsoluteJitter N

5.7 Signal Y

5.7.1 SignalLevel Y

5.7.2 NoiseLevel Y

5.7.3 ResidualEchoReturnLoss Y

5.8 QualityEstimates Y

5.8.1 ListeningQualityR Y

5.8.2 RLQEstAlg N

5.8.3 ConversationalQualityR N

5.8.4 RCQEstAlg N

5.8.5 ExternalR-In Y



Number Item Support

5.8.6 ExtRInEstAlg N

5.8.7 ExternalR-Out N

5.8.8 ExtROutEstAlg N

5.8.9 MOS-LQ Y

5.8.10 MOSLQEstAlg N

5.8.11 MOS-CQ Y

5.8.12 MOSCQEstAlg N

5.8.13 QoEEstAlg N

6 RemoteMetrics N

7 Dialog N

© Panasonic Corporation 2016

Parameter Name Value Range Default Value

Explanation

RTCP_ENABLE_n Y/N Y: Enable RTCP N: Disable

N Selects whether to enable or disable RTCP

RTCPXR_ENABLE_n Y/N Y: Enable RTCP-XR N: Disable

N Selects whether to enable or disable RTCP-XR

VQREPORT_COLLECTOR_ADDRESS Up to 256 characters NULL

Specifies the IP address or FQDN of the collector server. If you want to send PUBLISH to the proxy even though the collector server address

is set, you should this parameter as follows.

VQREPORT_COLLECTOR_ADDRESS=“sip:xxxxx:pppp”

- xxxxx: the collector server address - pppp: port of the collector server

VQREPORT_COLLECTOR_PORT 1 to 65535 5060 Specifies the port of the collector server.

VQREPORT_SEND

0 to 3 0 : Disable 1 : End of Session Report Using PUBLISH 2 : Interval report Using PUBLISH 3 : Alert Report Using PUBLISH

0 Specifies the sending type of the VQ report using PUBLISH.

VQREPORT_SIGNAL_COMPRESSION Y/N N Specifies whether to use signal compression for sending VQ report.

ALERT_REPORT_TRIGGER 0,1 0: Warning 1: Critical

0 Specifies the trigger to notify the VQ report.

ALERT_REPORT_MOSQ_CRITICAL 0 to 40 0 Specifies the critical's criteria to send VQ report at the time of occurring the MOSQ.

ALERT_REPORT_MOSQ_WARNING 0 to 40 0 Specifies the warning's criteria to send VQ report at the time of occurring the MOSQ.

ALERT_REPORT_DELAY_CRITICAL 0 to 2000 0 Specifies the critical's criteria to send VQ report at the time of occurring the delay.

ALERT_REPORT_DELAY_WARNING 0 to 2000 0 Specifies the warning's criteria to send VQ report at the time of occurring the delay.


3. Configuration parameters


4. Simplified Example of the Configuration Parameters

# Panasonic SIP Phone Standard Format File #

# This is a simplified sample configuration file for Voice Quality Monitoring.

## RTP/RTCP/RTCP-XR Settings

RTCP_ENABLE_1=“Y"

RTCPXR_ENABLE_1=“Y“

## VQ Report by PUBLISH

VQREPORT_COLLECTOR_ADDRESS=“[email protected]"

VQREPORT_COLLECTOR_PORT="5060"

VQREPORT_SEND=“3"

ALERT_REPORT_TRIGGER=“1"

ALERT_REPORT_MOSQ_CRITICAL=“15"

ALERT_REPORT_MOSQ_WARNING=“20"

ALERT_REPORT_DELAY_CRITICAL=“400"

ALERT_REPORT_DELAY_WARNING=“300"

VQREPORT_SIGNAL_COMPRESSION="N"

# Other setting uses a default value




5. Voice Quality Monitoring Report settings on Web GUI

Login to Web with administrator authority

“Network tab” ->“VoIP Settings”



RTCP and RTCP-XR settings from Web GUI

Login to Web with administrator authority

“VoIP tab” ->“Line n”

voice quality monitoring report (sip...

Documents