válvulas de control direccional - vektek llc · 2019-12-17 · válvulas de control 3-posiciones...
TRANSCRIPT
www.vektek.com +52-722-213-9243 © Vektek, julio 2019
Válvulas de Control 3-Posiciones 4-PuertosThese valves can be used to control a double acting workhholding system. (May also be used to control single acting systems)Rotary handle motion uses a rotary bearing.Heat treated rotor and poppets are spring and pressure loaded against each other to provide positive fluid control for hundreds of thousands of cyclesAll valves ship with short and long handles.Handle orientation can be adjusted in 45 increments. Standard length mounting bolts provided. (#10-24)
Modelo No.
Configuración Válvula
Nivel Fluido
Máximo
Presión Puerto Tanque
DO3 Mount71-1472-02 Centro Cerrado
1.5 gpm 250 psi max71-1474-02 P-Centro Bloqueado
Panel Mount71-3472-01 Centro Cerrado
1.5 gpm 250 psi max71-3474-01 P-Centro Bloqueado
Model No. Contents
70-3425-51Contains P-Check Valve Plate
and new mounting bolts.
D03 Mounted Pressure Check Valve Sandwich PlateP-Check Valve prevents pressure drop in the pressure line of the valve.Valve plate is installed between the valve and the supply manifold.Only available for D03 configurations.
.38
2.00 Sq
1.2801.220
1.594
P-check
ILS711406 REV A
C
D
E
F
G
H
I
J
K
L
M
N-3
O-2
Válvulas de Control Direccional
Operada Manualmente 3-Posiciones 4-Puertos
© Vektek, julio 2019 +52-722-213-9243 www.vektek.com
Estándar NFPA D03nContiene todas las conexiones para la tubería “P”, “T”, “A”, y “B”.nSimplifica el montaje de la válvula en el dispositivo para 1, 2 o 4 válvulas.nHace los cambios de válvula sencillos, solo remueva los 4 tornillos en la tapa para cambiar las válvulas.nTodas las válvulas VektorFlo® se ensamblan al patrón DO3 excepto el modelo panel de montaje.
Modelo No.70-9411-00
Modelo No. Descripción A B
70-9411-03 Manifold Dos Válvulas 4.57 5.9570-9411-05 Manifold Cuatro Válvulas 8.83 10.21
Estas Sub-Placas son para uso con las siguientes Válvulas: 2-Posiciones 3-Puertos Válvula Manual Modelo No. 71-1422-02 2-Posiciones 3-Puertos Válvulas Solenoide Modelos No. 71-1122-54 71-1122-13 71-1150-03 71-1150-05 3-Posiciones 4-Puertos Válvula Manual Modelos No. 71-1472-00 71-1474-00 3-Posiciones 4-Puertos Válvulas Solenoide Modelos No. 71-1235-21 71-1235-22 71-1235-40 71-1235-41
1.375
.88
4.00
2.00
1.00
.88.25
.441.75
.25.441.296
1.750
3.375
.315
.320
.360
1.000
.160 .25 Locating Hole
ILS709400 REV E
P
B A
T
Auxiliary "B" Port(With SAE 4 Plug)
Auxiliary "A" Port(With SAE 4 Plug)Pressure Port SAE 6
Tank Port SAE 6
#10-24 Tap X .50 Deep (X4)
Drilled & C'boredfor #10 SHCS (X4)
D03 MOUNTINGPATTERN PERNFPA/T3.5.1M R1-1984ANSI/B93.7M-1986 "B" Port SAE 4
"A" Port SAE 4
A
3.50
3.00
3.38
2X .56
2X 2.38
2X 3.00 B
5X 1.50
.96
.61 2.13 Each D03Mounting Surface
1.22 2.13 Each Setof Ports
.59
1.82
2X 1.72
2X .86
ILS709401 REV G
SAE 4 Port(Gauge)
SAE 4 A & B PortsSAE 6Return Port
D03 Valve Mounting Surface
SAE 6Pressure PortN-4
Válvulas de Control Direccional
Bases de Montaje para Válvulas DO3