vivitek interactive installation overview · 2018-12-17 · vivitek interactive installation...
TRANSCRIPT
![Page 1: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/1.jpg)
July 17th, 2013
Vivitek Interactive Installation Overview
Product Marketing Department
October 22, 2014
Version 2
Pen and Finger Touch Modes
![Page 2: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/2.jpg)
Interactive Functionality
Pen Mode Installation
• Standard Items
• Install D-Point 2 Driver
• Complete Installation
• Connecting Projector to PC
• Configuration Settings
• Confirmation
Finger Touch Mode Installation (DT01/DT02)
• Standard Items
• Module Overview
• Finger Touch Kit Installation
• Methods of Powering the DT01/DT02
• Configuration Settings
• Alignment Settings
• Configuration Settings
• Confirmation
![Page 3: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/3.jpg)
Pen Mode Installation Interactive Functionality
![Page 4: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/4.jpg)
Documentation Kit Interactive Pen USB Cable (Black Colored)
**
Accessories: In-The-Box Items
Standard items
![Page 5: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/5.jpg)
Step 1: Install D-Point 2 Driver
Locate driver and follow instructions for
installation
Note: D-Point 2’s driver version is:
2.2.2.1
Follow the D-Point 2 setup instructions to
complete installation.
Select required language and click "Ok".
setup.exe
Setting Up D-Point 2 with Interactive Pen
![Page 6: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/6.jpg)
Step 2: Complete Installation
D-Point 2 icon will be created on the desktop. Installation folder will be created on C: directory.
Upon starting D-Point 2, the configuration window will appear on the desktop to assist in setting up
the D-Point 2 configuration.
Note:
Method 1: Desktop Method 2: Start-up Menu
Enable D-Point Driver from the PC’s Desktop: 2 methods
Setting Up D-Point 2 with Interactive Pen
![Page 7: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/7.jpg)
Note: Once USB cable has been connected, confirm that the PC’s
driver and projector have has been successfully installed.
Step 3: Connecting Projector to PC
Attach cable to PC’s standard USB port
Attach cable to projector’s
min-USB port
Connect the Projector to a PC via the supplied USB cable. Plug the mini-USB cable into Projector's mini-USB port
and the other end to the PC.
Setting Up D-Point 2 with Interactive Pen
![Page 8: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/8.jpg)
1. Choose “Pen Mode”
2. Choose Configuration Settings
Step 4-1: Configuration Settings
Setting Up D-Point 2 with Interactive Pen
![Page 9: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/9.jpg)
1. Projector Model
• Choose “Ultra Short Throw
Model”
2. Choose Option
• Ceiling Mount Mode
3. Choose Language
• If language setting is changed, just restart D-Point 2 for settings to change.
Note: If projector is placed on the table, do not choose this
item.
Choose Next
Setting Up D-Point 2 with Interactive Pen
Step 4-2: Configuration Settings
![Page 10: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/10.jpg)
1. Choose Alignment View
2. Confirm if the projection screen is within the
camera’s projected area • Note: Alignment View helps visually verify that the IR camera's view is
aligned within the projector's projection coverage.
3. Click “Ok”
4. Choose “Next”
3.
1.
2.
4.
Setting Up D-Point 2 with Interactive Pen
Step 4-3 : Configuration Settings
![Page 11: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/11.jpg)
1. Chose Calibration (2 choices)
a) Auto (Suggested)
b) Manual
Auto Calibration
Manual Calibration
Note: There are 16 calibration points
Make sure the touch point is directly aligned in the middle of the
calibration point. Otherwise, it may not be positioned correctly.
Note: Auto calibrations takes a
few seconds.
Setting Up D-Point 2 with Interactive Pen
Step 4-4 : Configuration Settings
![Page 12: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/12.jpg)
Setting Up D-Point 2 with Interactive Pen
Confirm If Successful Installed and Working
1. Open the i-Draw software
Note: Use the pen to write on the board to see if the
calibration was successful setup.
Run i-Draw
Note: Choose Run i-Draw from the quick
access menu (in Window's system tray) to run
the program.
Step 5-1: Confirmation
![Page 13: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/13.jpg)
Setting Up D-Point 2 with Interactive Pen
Step 5-2: Confirmation
Simply start writing with the Interactive Pen to test the accuracy and
annotation response time.
![Page 14: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/14.jpg)
Finger Touch Mode Installation (DT01/DT02)
Interactive Functionality
![Page 15: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/15.jpg)
Laser Module w/Cover Pen
Accessories: In-The-Box Items
Standard items
Double Sided Tape Hex Key
Mini-USB Cable Alignment Masks
x2
x2
x2
![Page 16: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/16.jpg)
Module Overview
Control 1:
•If turning the Control Knob 1 to the left (counter clockwise), the bottom side of the laser curtain will move up.
•If turning the Control Knob 1 to the right (clockwise), the bottom side of the laser curtain will move down.
Control 3:
•If turning the Control Knob 3 to the left (counter clockwise), the right side of the laser curtain will move
up.
•If turning the Control Knob 3 to the right (clockwise), the right side of the laser curtain will move down.
Control 2:
•If turning the Control Knob 2 to the left (counter clockwise), the left side of the laser curtain will move up.
•If turning the Control Knob 2 to the right (clockwise), the left side of the laser curtain will move down.
Laser Curtain Alignment Principles
Control 1
Control 2 Control 3
Front View
Rear View
Double Sided Tape
Control 1
Turning Right (clockwise),
the bottom side of the laser curtain will move up
Turning left (counter clockwise),
the bottom side of the laser curtain will move down
Control 2
Turning Right (clockwise),
the left side of the laser curtain will move down
Turning left (counter clockwise),
the left side of the laser curtain will move up
Control 3
Turning Right (clockwise),
the left side of the laser curtain will move down
Turning left (counter clockwise),
the left side of the laser curtain will move up
laser diode
Setting Up DT01/DT02 with Finger Touch
![Page 17: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/17.jpg)
Step 1: Finger Touch Kit Installation
Note:
The Finger Touch Module can be used on an existing wall or whiteboard. Ideally the Finger Touch Module
should be used with a whiteboard. The projection surface should be completely flat and free of protrusions.
Wall Installation Place the laser curtain between
5cm to 10cm between the
module and projection surface.
7cm is recommended.
Frame White Board
Projection Area/
Interactive Area Projection Area/
Interactive Area
50mm - 10mm
* 70mm is recommended
50mm - 10mm
* 70mm is recommended
50mm
50mm
Setting Up DT01/DT02 with Finger Touch
Whiteboard Installation
![Page 18: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/18.jpg)
Step 2: Methods of Powering the DT01/DT02
Use the supplied USB cable to connect the
DT01/DT02 to the projector’s USB Type A port.
Method 1
(Recommended)
Use the supplied USB cable to connect the
DT01/DT02 to the PC’s USB port.
Method 2
Use the supplied USB cable to connect the
DT01/DT02 to a Power Socket. (Requires 5V USB
Power Adaptor (Not supplied))
Method 3
Projection/ Interactive Area
Overview of Connectivity
USB Cable
USB Cable
Setting Up DT01/DT02 with Finger Touch
![Page 19: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/19.jpg)
1. Choose Pen Mode
2. Choose Configuration Settings
Step 3-1: Configuration Settings
Setting Up DT01/DT02 with Finger Touch
![Page 20: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/20.jpg)
1. Choose Projector Type
• Choose Ultra-short Throw
2. Choose Option
• Ceiling Mount Mode
3. Choose Language
• If language setting is changed, just restart D-Point 2 for settings to change.
Note: If projector is placed on the table, do not choose this
item.
Choose Next
Step 3-2: Configuration Settings
Setting Up DT01/DT02 with Finger Touch
![Page 21: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/21.jpg)
1. Choose Alignment View
2. Confirm if the projection screen is within the
camera’s projected area • Note: Alignment View helps visually verify that the IR camera's view is
aligned within the projector's projection coverage.
3. Click “Ok”
4. Choose “Next”
5. Alignment Masks placement
3.
1.
2.
4.
Step 4-3 : Configuration Settings
Alignment Masks
Make sure
that the white
marks are
facing inside
Setting Up DT01/DT02 with Finger Touch
![Page 22: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/22.jpg)
Note: Remove the Alignment
Bars (x2) before choosing Auto
Calibration.
Setting Up DT01/DT02 with Finger Touch
Action 1-1
. . . . . .
View after turning on Laser Screen
• Use Controls 2 and 3 to adjust
the Laser Reflecting Light so
that the light is horizontal.
Example: Action 2 Photo
Action 2 Action 3 Action 4 Action 5
• Use Control 1 to adjust the
Laser Reflecting Light so that
the light is moved off the screen.
Example: Action 3 Photo
• Use Controls 2 and 3 to adjust
the Laser Reflecting Light so
that only two white dots appear
(Alignment bar’s left and right
reflectors) on the top left and
right corners. Example: Action 4
Photo
• Use Controls 2 and 3 to adjust
the Laser Reflecting Light so
that only one white dot appears
(Alignment bar’s centered
reflector) on the top left and
right corners. Example: Action 5
Photo
• Laser curtain is now ready
for Auto Calibration.
Choose Ok to proceed to the
next stage.
Step 4-4 : Alignment Settings
Possible Situation 2
Possible Situation 1
![Page 23: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/23.jpg)
Chose Auto Calibration
1. Auto
Auto Calibration
Note: Auto calibration takes several seconds.
Step 4-5 : Configuration Settings
Setting Up DT01/DT02 with Finger Touch
![Page 24: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/24.jpg)
Confirm If Successful Installed and Working
1. Choose Finger Touch Mode
2. Run the i-Draw software
Note: In order to see if calibration was
successful setup, use the pen to write
with in i-Draw.
Run i-Draw
Note: Choose Run i-Draw from the quick
access men (in Window's system tray) to
run the program.
Step 4-6: Confirmation
Choose Finger Touch Mode
Setting Up DT01/DT02 with Finger Touch
![Page 25: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/25.jpg)
Simply start writing with the Interactive Pen or Finger to test the
accuracy and annotation response time
Setting Up DT01/DT02 with Finger Touch
Step 4-7: Confirmation
![Page 26: Vivitek Interactive Installation Overview · 2018-12-17 · Vivitek Interactive Installation Overview Product Marketing Department October 22, 2014 Version 2 Pen and Finger Touch](https://reader034.vdocuments.site/reader034/viewer/2022042322/5f0cebe97e708231d437ca9c/html5/thumbnails/26.jpg)
Vivid Color, Vivid Life