SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 1

Visual Administrator Tool

Activities

Applies to

This Article applies to Enterprise Portal 70 For more information visit the Portal and Collaboration homepage

Summary

This article describes about few of the activities in Visual Administrator Tool

Author Anil Dichpally

Company Intelligroup Asia Pvt Ltd

Created on 25 September 2008

Author Bio

Anil Dichpally is working as Senior Consultant in Intelligroup Asia Pvt Ltd Hyderabad He has worked on EP KM and collaboration Webdyn pro Programming and Java Technologies He is SDN Moderator for Portal KM amp C and Searching Utilities areas He has completed his MCA from Osmania University

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 2

Table of Contents

Introduction 3

Features 3

Accessing the Cluster Configuration 3

Accessing to Various Protocols 3

Starting Visual Administrator 4

Finding the Port Number 7

Activities in Visual Administrator 7

ThreadManagerproperties 8

SystemThreadManagerproperties 8

HTTP Provider 9

System Information 9

Security Provider 10

Portal Runtime 11

Component Build Service 12

Configuration Adapter 12

Display Cache Content 13

Connector Container 14

Deploy 17

JCO RFC Provider 18

Unlocking Visual Administrator 19

Related Content 20

Disclaimer and Liability Notice 21

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 3

Introduction

J2EE Engine Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster all cluster elements and all modules running on them It provides remote monitoring and management of managers services libraries and interfaces working on each element in a single GUI

Features

Visual Administrator includes functions for

1) Obtaining general information about a service manager interface or library (for example its name group and so on)

2) Logging on to the J2EE Engine via the Visual Administrator tool

3) Administrating and changing the properties either specific or common for each service or manager

Configuring the global properties

4) Runtime administration and control

Accessing the Cluster Configuration

1) Choose the Global Configuration tab

2) If you want to configure the server process on the cluster choose the Server tab

3) If you want to configure the dispatcherrsquos element configurations on the cluster choose

the Dispatcher tab

4) To access the managers expand Kernel

5) To access the services expand Services Manage the chosen component

Accessing to Various Protocols

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 4

Starting Visual Administrator

1) Go to Server Installed path ie

Driveusrsapltsystem idgtltsystem instancegtJ2EEadmin

2) Choose gobat (batch file) and start it (double click)

3) Under Global Server Configuration choose ltServeridgt

This will give the Information about the Dispatcher Instance and Server Instance

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 5

4) Click on Dispatcher Instance ndash list the KernelInterfacelibrariesServices

5) Select the Server Instance

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 6

6) Click on Server Instance list the Kernel Interface libraries Services

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 7

Finding the Port Number

We can find the engine Port number in Folder Structure

ltdrivegtusrsapltsystem idgtltinstance numbergtJ2EEadmingobat

Ex CusrsapZ67JC01J2EEadmin

As per above example Instance number is 01

Port number = 50000 + 100 Instance number + Port Index

Here

Port number = 50000 + 100 01 + 04 = 50104

Activities in Visual Administrator

Cluster Manager

Choose ServerDispatcher Kernel Cluster Manager Properties tab

Modify the required property values depending on the tasks you want to perform

1) Use elementname to specify the name of the cluster element There are no restrictions

about the name

2) Use elementjoinPort to specify the port on which the server process listens for

connections

3) The port value must not be greater than 65535 less than 1024 or a ldquowell knownrdquo port This

property is available only on server processes

4) Choose save Properties to save your changes and restart the cluster node

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 8

Thread Manager

Choose ServerDispatcher Kernel Thread Manager Properties tab

Thread Manager exists on both dispatcher and server nodes The configuration is very important for performance

Thread Manager displays thread properties which affects the performance of iviews

ThreadManagerproperties

MaxThreadCount InitialThreadCount CurrentThreadCount MinThreadCount ChangeThreadCountStep

SystemThreadManagerproperties

MaxThreadCount MaxRQSize ChangeThreadCountStep

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 9

HTTP Provider

The global settings are maintained using the Global Configuration tab page

The Keep Alive Timeout parameter is globally maintained under

Global Configuration rarr Dispatcher rarr HTTP Provider

If you select the parameter you can maintain it in the Value field

You transfer the maintained value to the view by choosing Update

Once you have finished the value maintenance complete the maintenance with Save Properties A new input window now appears which offers you the option of transferring the settings to the nodes in the cluster

What ever the parameters that are set at the config tool ndash cluster tab ndash Global Dispatcher Configuration ndash services resembles at the visual admin tool

System Information

System Information is used to display the most important administrative information of an SAP Web AS Java

System Information is called using a browser

It can be called from any front end on which a browser is installed

It is called using the HTTP port of the SAP Web AS Java On the start page of the SAP Web AS Java there is a link to the System Information

Authentication as a system administrator is required to view this information

System Information displays general system information for the SAP Web AS Java and information about the individual instances of the SAP Web AS Java To login into System Information

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 3

Introduction

J2EE Engine Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster all cluster elements and all modules running on them It provides remote monitoring and management of managers services libraries and interfaces working on each element in a single GUI

Features

Visual Administrator includes functions for

1) Obtaining general information about a service manager interface or library (for example its name group and so on)

2) Logging on to the J2EE Engine via the Visual Administrator tool

3) Administrating and changing the properties either specific or common for each service or manager

Configuring the global properties

4) Runtime administration and control

Accessing the Cluster Configuration

1) Choose the Global Configuration tab

2) If you want to configure the server process on the cluster choose the Server tab

3) If you want to configure the dispatcherrsquos element configurations on the cluster choose

the Dispatcher tab

4) To access the managers expand Kernel

5) To access the services expand Services Manage the chosen component

Accessing to Various Protocols

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 4

Starting Visual Administrator

1) Go to Server Installed path ie

Driveusrsapltsystem idgtltsystem instancegtJ2EEadmin

2) Choose gobat (batch file) and start it (double click)

3) Under Global Server Configuration choose ltServeridgt

This will give the Information about the Dispatcher Instance and Server Instance

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 5

4) Click on Dispatcher Instance ndash list the KernelInterfacelibrariesServices

5) Select the Server Instance

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 6

6) Click on Server Instance list the Kernel Interface libraries Services

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 7

Finding the Port Number

We can find the engine Port number in Folder Structure

ltdrivegtusrsapltsystem idgtltinstance numbergtJ2EEadmingobat

Ex CusrsapZ67JC01J2EEadmin

As per above example Instance number is 01

Port number = 50000 + 100 Instance number + Port Index

Here

Port number = 50000 + 100 01 + 04 = 50104

Activities in Visual Administrator

Cluster Manager

Choose ServerDispatcher Kernel Cluster Manager Properties tab

Modify the required property values depending on the tasks you want to perform

1) Use elementname to specify the name of the cluster element There are no restrictions

about the name

2) Use elementjoinPort to specify the port on which the server process listens for

connections

3) The port value must not be greater than 65535 less than 1024 or a ldquowell knownrdquo port This

property is available only on server processes

4) Choose save Properties to save your changes and restart the cluster node

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 8

Thread Manager

Choose ServerDispatcher Kernel Thread Manager Properties tab

Thread Manager exists on both dispatcher and server nodes The configuration is very important for performance

Thread Manager displays thread properties which affects the performance of iviews

ThreadManagerproperties

MaxThreadCount InitialThreadCount CurrentThreadCount MinThreadCount ChangeThreadCountStep

SystemThreadManagerproperties

MaxThreadCount MaxRQSize ChangeThreadCountStep

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 9

HTTP Provider

The global settings are maintained using the Global Configuration tab page

The Keep Alive Timeout parameter is globally maintained under

Global Configuration rarr Dispatcher rarr HTTP Provider

If you select the parameter you can maintain it in the Value field

You transfer the maintained value to the view by choosing Update

Once you have finished the value maintenance complete the maintenance with Save Properties A new input window now appears which offers you the option of transferring the settings to the nodes in the cluster

What ever the parameters that are set at the config tool ndash cluster tab ndash Global Dispatcher Configuration ndash services resembles at the visual admin tool

System Information

System Information is used to display the most important administrative information of an SAP Web AS Java

System Information is called using a browser

It can be called from any front end on which a browser is installed

It is called using the HTTP port of the SAP Web AS Java On the start page of the SAP Web AS Java there is a link to the System Information

Authentication as a system administrator is required to view this information

System Information displays general system information for the SAP Web AS Java and information about the individual instances of the SAP Web AS Java To login into System Information

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 4

Starting Visual Administrator

1) Go to Server Installed path ie

Driveusrsapltsystem idgtltsystem instancegtJ2EEadmin

2) Choose gobat (batch file) and start it (double click)

3) Under Global Server Configuration choose ltServeridgt

This will give the Information about the Dispatcher Instance and Server Instance

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 5

4) Click on Dispatcher Instance ndash list the KernelInterfacelibrariesServices

5) Select the Server Instance

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 6

6) Click on Server Instance list the Kernel Interface libraries Services

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 7

Finding the Port Number

We can find the engine Port number in Folder Structure

ltdrivegtusrsapltsystem idgtltinstance numbergtJ2EEadmingobat

Ex CusrsapZ67JC01J2EEadmin

As per above example Instance number is 01

Port number = 50000 + 100 Instance number + Port Index

Here

Port number = 50000 + 100 01 + 04 = 50104

Activities in Visual Administrator

Cluster Manager

Choose ServerDispatcher Kernel Cluster Manager Properties tab

Modify the required property values depending on the tasks you want to perform

1) Use elementname to specify the name of the cluster element There are no restrictions

about the name

2) Use elementjoinPort to specify the port on which the server process listens for

connections

3) The port value must not be greater than 65535 less than 1024 or a ldquowell knownrdquo port This

property is available only on server processes

4) Choose save Properties to save your changes and restart the cluster node

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 8

Thread Manager

Choose ServerDispatcher Kernel Thread Manager Properties tab

Thread Manager exists on both dispatcher and server nodes The configuration is very important for performance

Thread Manager displays thread properties which affects the performance of iviews

ThreadManagerproperties

MaxThreadCount InitialThreadCount CurrentThreadCount MinThreadCount ChangeThreadCountStep

SystemThreadManagerproperties

MaxThreadCount MaxRQSize ChangeThreadCountStep

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 9

HTTP Provider

The global settings are maintained using the Global Configuration tab page

The Keep Alive Timeout parameter is globally maintained under

Global Configuration rarr Dispatcher rarr HTTP Provider

If you select the parameter you can maintain it in the Value field

You transfer the maintained value to the view by choosing Update

Once you have finished the value maintenance complete the maintenance with Save Properties A new input window now appears which offers you the option of transferring the settings to the nodes in the cluster

What ever the parameters that are set at the config tool ndash cluster tab ndash Global Dispatcher Configuration ndash services resembles at the visual admin tool

System Information

System Information is used to display the most important administrative information of an SAP Web AS Java

System Information is called using a browser

It can be called from any front end on which a browser is installed

It is called using the HTTP port of the SAP Web AS Java On the start page of the SAP Web AS Java there is a link to the System Information

Authentication as a system administrator is required to view this information

System Information displays general system information for the SAP Web AS Java and information about the individual instances of the SAP Web AS Java To login into System Information

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 5

4) Click on Dispatcher Instance ndash list the KernelInterfacelibrariesServices

5) Select the Server Instance

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 6

6) Click on Server Instance list the Kernel Interface libraries Services

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 7

Finding the Port Number

We can find the engine Port number in Folder Structure

ltdrivegtusrsapltsystem idgtltinstance numbergtJ2EEadmingobat

Ex CusrsapZ67JC01J2EEadmin

As per above example Instance number is 01

Port number = 50000 + 100 Instance number + Port Index

Here

Port number = 50000 + 100 01 + 04 = 50104

Activities in Visual Administrator

Cluster Manager

Choose ServerDispatcher Kernel Cluster Manager Properties tab

Modify the required property values depending on the tasks you want to perform

1) Use elementname to specify the name of the cluster element There are no restrictions

about the name

2) Use elementjoinPort to specify the port on which the server process listens for

connections

3) The port value must not be greater than 65535 less than 1024 or a ldquowell knownrdquo port This

property is available only on server processes

4) Choose save Properties to save your changes and restart the cluster node

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 8

Thread Manager

Choose ServerDispatcher Kernel Thread Manager Properties tab

Thread Manager exists on both dispatcher and server nodes The configuration is very important for performance

Thread Manager displays thread properties which affects the performance of iviews

ThreadManagerproperties

MaxThreadCount InitialThreadCount CurrentThreadCount MinThreadCount ChangeThreadCountStep

SystemThreadManagerproperties

MaxThreadCount MaxRQSize ChangeThreadCountStep

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 9

HTTP Provider

The global settings are maintained using the Global Configuration tab page

The Keep Alive Timeout parameter is globally maintained under

Global Configuration rarr Dispatcher rarr HTTP Provider

If you select the parameter you can maintain it in the Value field

You transfer the maintained value to the view by choosing Update

Once you have finished the value maintenance complete the maintenance with Save Properties A new input window now appears which offers you the option of transferring the settings to the nodes in the cluster

What ever the parameters that are set at the config tool ndash cluster tab ndash Global Dispatcher Configuration ndash services resembles at the visual admin tool

System Information

System Information is used to display the most important administrative information of an SAP Web AS Java

System Information is called using a browser

It can be called from any front end on which a browser is installed

It is called using the HTTP port of the SAP Web AS Java On the start page of the SAP Web AS Java there is a link to the System Information

Authentication as a system administrator is required to view this information

System Information displays general system information for the SAP Web AS Java and information about the individual instances of the SAP Web AS Java To login into System Information

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 6

6) Click on Server Instance list the Kernel Interface libraries Services

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 7

Finding the Port Number

We can find the engine Port number in Folder Structure

ltdrivegtusrsapltsystem idgtltinstance numbergtJ2EEadmingobat

Ex CusrsapZ67JC01J2EEadmin

As per above example Instance number is 01

Port number = 50000 + 100 Instance number + Port Index

Here

Port number = 50000 + 100 01 + 04 = 50104

Activities in Visual Administrator

Cluster Manager

Choose ServerDispatcher Kernel Cluster Manager Properties tab

Modify the required property values depending on the tasks you want to perform

1) Use elementname to specify the name of the cluster element There are no restrictions

about the name

2) Use elementjoinPort to specify the port on which the server process listens for

connections

3) The port value must not be greater than 65535 less than 1024 or a ldquowell knownrdquo port This

property is available only on server processes

4) Choose save Properties to save your changes and restart the cluster node

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 8

Thread Manager

Choose ServerDispatcher Kernel Thread Manager Properties tab

Thread Manager exists on both dispatcher and server nodes The configuration is very important for performance

Thread Manager displays thread properties which affects the performance of iviews

ThreadManagerproperties

MaxThreadCount InitialThreadCount CurrentThreadCount MinThreadCount ChangeThreadCountStep

SystemThreadManagerproperties

MaxThreadCount MaxRQSize ChangeThreadCountStep

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 9

HTTP Provider

The global settings are maintained using the Global Configuration tab page

The Keep Alive Timeout parameter is globally maintained under

Global Configuration rarr Dispatcher rarr HTTP Provider

If you select the parameter you can maintain it in the Value field

You transfer the maintained value to the view by choosing Update

Once you have finished the value maintenance complete the maintenance with Save Properties A new input window now appears which offers you the option of transferring the settings to the nodes in the cluster

What ever the parameters that are set at the config tool ndash cluster tab ndash Global Dispatcher Configuration ndash services resembles at the visual admin tool

System Information

System Information is used to display the most important administrative information of an SAP Web AS Java

System Information is called using a browser

It can be called from any front end on which a browser is installed

It is called using the HTTP port of the SAP Web AS Java On the start page of the SAP Web AS Java there is a link to the System Information

Authentication as a system administrator is required to view this information

System Information displays general system information for the SAP Web AS Java and information about the individual instances of the SAP Web AS Java To login into System Information

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 7

Finding the Port Number

We can find the engine Port number in Folder Structure

ltdrivegtusrsapltsystem idgtltinstance numbergtJ2EEadmingobat

Ex CusrsapZ67JC01J2EEadmin

As per above example Instance number is 01

Port number = 50000 + 100 Instance number + Port Index

Here

Port number = 50000 + 100 01 + 04 = 50104

Activities in Visual Administrator

Cluster Manager

Choose ServerDispatcher Kernel Cluster Manager Properties tab

Modify the required property values depending on the tasks you want to perform

1) Use elementname to specify the name of the cluster element There are no restrictions

about the name

2) Use elementjoinPort to specify the port on which the server process listens for

connections

3) The port value must not be greater than 65535 less than 1024 or a ldquowell knownrdquo port This

property is available only on server processes

4) Choose save Properties to save your changes and restart the cluster node

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 8

Thread Manager

Choose ServerDispatcher Kernel Thread Manager Properties tab

Thread Manager exists on both dispatcher and server nodes The configuration is very important for performance

Thread Manager displays thread properties which affects the performance of iviews

ThreadManagerproperties

MaxThreadCount InitialThreadCount CurrentThreadCount MinThreadCount ChangeThreadCountStep

SystemThreadManagerproperties

MaxThreadCount MaxRQSize ChangeThreadCountStep

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 9

HTTP Provider

The global settings are maintained using the Global Configuration tab page

The Keep Alive Timeout parameter is globally maintained under

Global Configuration rarr Dispatcher rarr HTTP Provider

If you select the parameter you can maintain it in the Value field

You transfer the maintained value to the view by choosing Update

Once you have finished the value maintenance complete the maintenance with Save Properties A new input window now appears which offers you the option of transferring the settings to the nodes in the cluster

What ever the parameters that are set at the config tool ndash cluster tab ndash Global Dispatcher Configuration ndash services resembles at the visual admin tool

System Information

System Information is used to display the most important administrative information of an SAP Web AS Java

System Information is called using a browser

It can be called from any front end on which a browser is installed

It is called using the HTTP port of the SAP Web AS Java On the start page of the SAP Web AS Java there is a link to the System Information

Authentication as a system administrator is required to view this information

System Information displays general system information for the SAP Web AS Java and information about the individual instances of the SAP Web AS Java To login into System Information

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 8

Thread Manager

Choose ServerDispatcher Kernel Thread Manager Properties tab

Thread Manager exists on both dispatcher and server nodes The configuration is very important for performance

Thread Manager displays thread properties which affects the performance of iviews

ThreadManagerproperties

MaxThreadCount InitialThreadCount CurrentThreadCount MinThreadCount ChangeThreadCountStep

SystemThreadManagerproperties

MaxThreadCount MaxRQSize ChangeThreadCountStep

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 9

HTTP Provider

The global settings are maintained using the Global Configuration tab page

The Keep Alive Timeout parameter is globally maintained under

Global Configuration rarr Dispatcher rarr HTTP Provider

If you select the parameter you can maintain it in the Value field

You transfer the maintained value to the view by choosing Update

Once you have finished the value maintenance complete the maintenance with Save Properties A new input window now appears which offers you the option of transferring the settings to the nodes in the cluster

What ever the parameters that are set at the config tool ndash cluster tab ndash Global Dispatcher Configuration ndash services resembles at the visual admin tool

System Information

System Information is used to display the most important administrative information of an SAP Web AS Java

System Information is called using a browser

It can be called from any front end on which a browser is installed

It is called using the HTTP port of the SAP Web AS Java On the start page of the SAP Web AS Java there is a link to the System Information

Authentication as a system administrator is required to view this information

System Information displays general system information for the SAP Web AS Java and information about the individual instances of the SAP Web AS Java To login into System Information

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 9

HTTP Provider

The global settings are maintained using the Global Configuration tab page

The Keep Alive Timeout parameter is globally maintained under

Global Configuration rarr Dispatcher rarr HTTP Provider

If you select the parameter you can maintain it in the Value field

You transfer the maintained value to the view by choosing Update

Once you have finished the value maintenance complete the maintenance with Save Properties A new input window now appears which offers you the option of transferring the settings to the nodes in the cluster

What ever the parameters that are set at the config tool ndash cluster tab ndash Global Dispatcher Configuration ndash services resembles at the visual admin tool

System Information

System Information is used to display the most important administrative information of an SAP Web AS Java

System Information is called using a browser

It can be called from any front end on which a browser is installed

It is called using the HTTP port of the SAP Web AS Java On the start page of the SAP Web AS Java there is a link to the System Information

Authentication as a system administrator is required to view this information

System Information displays general system information for the SAP Web AS Java and information about the individual instances of the SAP Web AS Java To login into System Information

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 10

Choose the URL httphostnameportnumbersapmonitoringSystemInfo

Eg httpigaportsvr50000sapmonitoringSystemInfo

Security Provider

To display the active user store select a Server in the Visual Administrator

In the security Provider service select Runtime rarr User Management and choose Manage Security Stores

If Activate User Store is inactive for a user store this means that the user store that you have just chosen is already active If you want to use UDDI instead of the default user store UME you can use the described method to change this by choosing Activate User Store for the UDDI user store

Go to Server ndash Services ndash Security Provider ndash Runtime ndash User Management ndash Manage Security Stores

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 11

Portal Runtime

Under Global Configuration ndash Server Instance ndash Services ndash choose comsapportalprtsapj2ee provides the portal runtime navigation cache maximum size lifetime and relative path of Portal Deployment Portal Content Directory (PCD) folder

It can change the response timeout and pool size

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 12

Component Build Service

Under Global Configuration - Server Instance ndash Services ndash Choose Component Build service where it displays the properties of build tool path JDK path to clean up the request folder to be true or false thread pool size

Configuration Adapter

Under runtime it gives the display configuration information of entire adapters which we configure in the server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 13

Display Cache Content

Under runtime of Configuration adapter display all the Cache content that is related to server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 14

Connector Container

Under Global Configuration ndash Server Instance ndash Services ndash Choose Connector Container ndash gives the entire runtime information that is connected to the server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 15

Select the Connector that gives the general information related to connector

Displays the information related to Managed Connection factory and transaction support

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 16

Displays the information related to selected connector Connection factory interfaces classes and JNDI name

Displays the configuration properties that are related with R3 System or third party systems

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 17

Deploy

Displays the information of applications that is deployed on the Server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 18

Choose Webdynpro application that is to be deploying as it is in red color we need to start the application and deploy Choose Deploy amp Start or Start Even the Deployed application can be deleted successfully by using Remove button If any application to be modified choose update button

JCO RFC Provider

Key Storage

Under Global Configuration ndash Server Instance ndash Services ndash Choose Key storage to Create the entry of SAP Logon Ticket Key pair

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 12

Component Build Service

Under Global Configuration - Server Instance ndash Services ndash Choose Component Build service where it displays the properties of build tool path JDK path to clean up the request folder to be true or false thread pool size

Configuration Adapter

Under runtime it gives the display configuration information of entire adapters which we configure in the server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 13

Display Cache Content

Under runtime of Configuration adapter display all the Cache content that is related to server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 14

Connector Container

Under Global Configuration ndash Server Instance ndash Services ndash Choose Connector Container ndash gives the entire runtime information that is connected to the server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 15

Select the Connector that gives the general information related to connector

Displays the information related to Managed Connection factory and transaction support

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 16

Displays the information related to selected connector Connection factory interfaces classes and JNDI name

Displays the configuration properties that are related with R3 System or third party systems

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 17

Deploy

Displays the information of applications that is deployed on the Server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 18

Choose Webdynpro application that is to be deploying as it is in red color we need to start the application and deploy Choose Deploy amp Start or Start Even the Deployed application can be deleted successfully by using Remove button If any application to be modified choose update button

JCO RFC Provider

Key Storage

Under Global Configuration ndash Server Instance ndash Services ndash Choose Key storage to Create the entry of SAP Logon Ticket Key pair

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 13

Display Cache Content

Under runtime of Configuration adapter display all the Cache content that is related to server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 14

Connector Container

Under Global Configuration ndash Server Instance ndash Services ndash Choose Connector Container ndash gives the entire runtime information that is connected to the server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 15

Select the Connector that gives the general information related to connector

Displays the information related to Managed Connection factory and transaction support

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 16

Displays the information related to selected connector Connection factory interfaces classes and JNDI name

Displays the configuration properties that are related with R3 System or third party systems

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 17

Deploy

Displays the information of applications that is deployed on the Server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 18

Choose Webdynpro application that is to be deploying as it is in red color we need to start the application and deploy Choose Deploy amp Start or Start Even the Deployed application can be deleted successfully by using Remove button If any application to be modified choose update button

JCO RFC Provider

Key Storage

Under Global Configuration ndash Server Instance ndash Services ndash Choose Key storage to Create the entry of SAP Logon Ticket Key pair

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 14

Connector Container

Under Global Configuration ndash Server Instance ndash Services ndash Choose Connector Container ndash gives the entire runtime information that is connected to the server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 15

Select the Connector that gives the general information related to connector

Displays the information related to Managed Connection factory and transaction support

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 16

Displays the information related to selected connector Connection factory interfaces classes and JNDI name

Displays the configuration properties that are related with R3 System or third party systems

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 17

Deploy

Displays the information of applications that is deployed on the Server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 18

Choose Webdynpro application that is to be deploying as it is in red color we need to start the application and deploy Choose Deploy amp Start or Start Even the Deployed application can be deleted successfully by using Remove button If any application to be modified choose update button

JCO RFC Provider

Key Storage

Under Global Configuration ndash Server Instance ndash Services ndash Choose Key storage to Create the entry of SAP Logon Ticket Key pair

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 15

Select the Connector that gives the general information related to connector

Displays the information related to Managed Connection factory and transaction support

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 16

Displays the information related to selected connector Connection factory interfaces classes and JNDI name

Displays the configuration properties that are related with R3 System or third party systems

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 17

Deploy

Displays the information of applications that is deployed on the Server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 18

Choose Webdynpro application that is to be deploying as it is in red color we need to start the application and deploy Choose Deploy amp Start or Start Even the Deployed application can be deleted successfully by using Remove button If any application to be modified choose update button

JCO RFC Provider

Key Storage

Under Global Configuration ndash Server Instance ndash Services ndash Choose Key storage to Create the entry of SAP Logon Ticket Key pair

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 16

Displays the information related to selected connector Connection factory interfaces classes and JNDI name

Displays the configuration properties that are related with R3 System or third party systems

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 17

Deploy

Displays the information of applications that is deployed on the Server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 18

Choose Webdynpro application that is to be deploying as it is in red color we need to start the application and deploy Choose Deploy amp Start or Start Even the Deployed application can be deleted successfully by using Remove button If any application to be modified choose update button

JCO RFC Provider

Key Storage

Under Global Configuration ndash Server Instance ndash Services ndash Choose Key storage to Create the entry of SAP Logon Ticket Key pair

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 17

Deploy

Displays the information of applications that is deployed on the Server

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 18

Choose Webdynpro application that is to be deploying as it is in red color we need to start the application and deploy Choose Deploy amp Start or Start Even the Deployed application can be deleted successfully by using Remove button If any application to be modified choose update button

JCO RFC Provider

Key Storage

Under Global Configuration ndash Server Instance ndash Services ndash Choose Key storage to Create the entry of SAP Logon Ticket Key pair

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 18

Choose Webdynpro application that is to be deploying as it is in red color we need to start the application and deploy Choose Deploy amp Start or Start Even the Deployed application can be deleted successfully by using Remove button If any application to be modified choose update button

JCO RFC Provider

Key Storage

Under Global Configuration ndash Server Instance ndash Services ndash Choose Key storage to Create the entry of SAP Logon Ticket Key pair

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 19

Unlocking Visual Administrator

There might be an instance where Visual Administrator might got locked due to the wrong entry by the User (after 3 wrong trails)

Please check the following link for the detail description

httphelpsapcomsaphelp_nw04helpdataenc4f01241c738f423e10000000a155106framesethtm

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 20

Related Content

httphelpsapcomsaphelp_nw04helpdataen3983682615cd4f8197d0612529f2165fframesethtm

httphelpsapcomsaphelp_nw70helpdataena2f9d7fed2adc340ab462ae159d19509framesethtm

For more information visit the Portal and Collaboration homepage

Visual Administrator Tool Activities

SAP DEVELOPER NETWORK | sdnsapcom BUSINESS PROCESS EXPERT COMMUNITY | bpxsapcom

copy 2008 SAP AG 21

Disclaimer and Liability Notice

This document may discuss sample coding or other information that does not include SAP official interfaces and therefore is not

supported by SAP Changes made based on this information are not supported and can be overwritten during an upgrade

SAP will not be held liable for any damages caused by using or misusing the information code or methods suggested in this document

and anyone using these methods does so at hisher own risk

SAP offers no guarantees and assumes no responsibility or liability of any type with respect to the content of this technical article or code sample including any liability resulting from incompatibility between the content within this document and the materials and

services offered by SAP You agree that you will not hold or seek to hold SAP responsible or liable with respect to the content of this

document