Vinyl layer and air-release linerTransferRite AirMask

adheres well to air-release liners, but won’t lift vinyl

off the target surface

AirMask is a film premask that is uniquely engineered for cold laminator application to exposed air-release liners

Visit WWW.ABITAPE.COM to locate a distributornear you and order your AirMask today!

Air-release liners have been helping to eliminate bubbles for years, but no premask has worked well - Until now! TransferRite AirMask is a unique film with an affinity for air-release liners.

• Effectively adheres to exposed air-release liners• Works with a wide range of vinyl and liner brands• Designed for cold lamination - no heat vacuum required• Releases cleanly and easily upon installation

From the makers of

AIRMASK TECHNICAL INFORMATION

From the makers of

08/2019

105 Whittendale Drive • Moorestown, NJ 08057PH: (856) 778-0708 • FAX: (856) 778-7485

Toll Free Fax: 888-224-6325 (US Only)

WWW.ABITAPE.COM

Available roll widths24”, 48”, 54” and 60”

.61m, 1.22m, 1.37m and 1.52m

P H Y S I C A L P R O P E R T Y

Thickness 4.3 mils; 109 microns PSTC-133PSTC-101

ASTM D882ASTM D882

ASTM D882ASTM D882

Adhesion 7.0 oz/inch; 1.9 N/25mmTensile Strength, MD 5,600 psi; 38.6 N/mm2

Tensile Strength, CD 5,000 psi; 34.5 N/mm2

Elongation, MD 570%Elongation, CD 550%

Shelf Life** when stored at 70º F, 50% relative humidity

24 months

U N I T S M E T H O D

• Cold Lamination• Partial Wraps• Easy Removal