· web viewstatus of the courses 11.45.1all students are normally admitted in the first instance...

11.45 Department of Design, Manufacture and Engineering Management

Product Design Engineering

BEng with Honours in Product Design EngineeringBEng in Product Design EngineeringDiploma of Higher Education in Product Design EngineeringCertificate of Higher Education in Product Design Engineering

Course Regulations[These regulations are to be read in conjunction with Regulation 11.1]

Status of the Courses11.45.1 All students are normally admitted in the first instance as potential

Honours students. Transfer to the MEng degree of Product Design Engineering is possible up to the end of third year subject to satisfying the appropriate progress requirements.

Mode of Study11.45.2 The courses are available by full-time study only.

Curriculum First Year

11.45.3 All students shall undertake classes amounting to 120 credits as follows:

Compulsory Classes LevelCredits

16 132 Engineering Mechanics 1 1 20DM 100 Design 1 1 20DM 101 Integrating Studies 1 1 20DM 102 Introduction to Production Engineering and

Management 1 20MM 115 Mathematics 1D 1 20

Elective Class(es) 20

Second Year 11.45.4 All students shall undertake classes amounting to 120 credits as

follows:


DM 200 Design 2 2 20DM 202 Design and Manufacturing Management 2 20DM 204 Integrating Studies 2 2 20DM 205 Production Techniques 1 2 20EE 274^ Electrical and Electronic Engineering 2 20ME 106^ Mechanical Engineering 2 1 20

Third Year 11.45.5 All students shall undertake classes amounting to 120 credits as

follows:


DM 303 Engineering Design 3 20DM 304 Integrating Studies 3 3 20DM 306 Product Development 3 20DM 308 Production Techniques 2 3 20DM 309 Mechatronics Design and Applications 3 20

Optional Classes20 credits chosen from:DM 300 Design Emotion and Experience 3 20DM 302 Design Interaction 3 20DM 305 Innovation Management 3 20DM 307 Production and Operations Management 3 20DM 404 Quality Management 4 20

Fourth Year11.45.6 All students shall undertake classes amounting to 120 credits as

follows:


DM 400 Advanced Design Methods 4 20DM 401 Advanced Product Design and Manufacture 4 20DM 402 Individual Project 1 4 40DM 403 Product Development Project 1 4 20

Optional Classes20 credits chosen from the list of optional classes in Regulation 11.45.5.

Combination Classes 11.45.7

Class^ Credits ComprisesEE 274 Electrical and Electronic Engineering

20 19 222 Electrical Machines and Control and 19 260 Electrical and Electronic Engineering

ME 106 Mechanical Engineering 2

20 ME 101 Heat and Flow 1 and 16 155 Engineering Materials

Progress11.45.8 In order to progress to the second year of the course, a student must

have accumulated at least 100 credits from the course curriculum.

11.45.9 In order to progress to the third year of the course, a student must have accumulated at least 220 credits from the course curriculum including 100 credits at Level 2 or above.

11.45.10 In order to progress to the fourth year of the course, a student must have accumulated at least 360 credits from the course curriculum including 100 credits at Level 3 or above.

Final Honours Classification11.45.11 The final Honours classification will normally be based on:

(i) the first assessed attempt at compulsory and, if appropriate, specified optional classes which are taken in the second, third and fourth year of the course

(ii) if appropriate, an oral examination.

Award 11.45.12 BEng with Honours: In order to qualify for the award of the degree of

BEng with Honours in Product Design Engineering, a candidate must have accumulated no fewer than 480 credits from the course curriculum including those for the class DM 402 Individual Project 1.

11.45.13 BEng: In order to qualify for the award of the degree of BEng in Product Design Engineering, a candidate must have accumulated no fewer than 360 credits from the course curriculum. Notwithstanding Regulation 11.1.10, these must include no fewer than 100 credits at Level 3 or above.

11.45.14 Diploma of Higher Education: In order to qualify for the award of a Diploma of Higher Education in Product Design Engineering, a candidate must have accumulated no fewer than 240 credits from the course curriculum.

11.45.15 Certificate of Higher Education: In order to qualify for the award of a Certificate of Higher Education in Product Design Engineering, a candidate must have accumulated no fewer than 120 credits from the course curriculum.

Transfer11.45.16 A candidate who fails to satisfy the progress or award requirements for

the BEng in Product Design Engineering may be transferred to the degree of BEng in Engineering Studies.

11.45.17to 11.45.20 (Numbers not used)

Product Design and Innovation

BSc with Honours in Product Design and InnovationBSc in Product Design and InnovationDiploma of Higher Education in Product Design and InnovationCertificate of Higher Education in Product Design and Innovation



Honours students.





DM 100 Design1 1 20DM 101 Integrating Studies 1 1 20DM 102 Introduction to Production Engineering and

Management 1 20DM 103 Technology Concepts 1 20Z1 151 Entrepreneurship: Theory and Practice 1 20



follows:


DM 200 Design 2 2 20DM 202 Design and Manufacturing Management 2 20DM 203 Design Prototyping 2 20DM 204 Integrating Studies 2 2 20DM 205 Production Techniques 1 2 20Z1 213 Creativity and Opportunity Identification 2 20


follows:


DM 300 Design Emotion and Experience 3 20DM 302 Design Interaction 3 20DM 304 Integrating Studies 3 3 20DM 306 Product Development 3 20DM 308 Production Techniques 2 3 20

Optional Classes20 credits chosen from:DM 303 Engineering Design 3 20DM 305 Innovation Management 3 20DM 307 Production and Operations Management 3 20DM 404 Quality Management 4 20


follows:


DM 400 Advanced Design Methods 4 20DM 401 Advanced Product Design & Manufacture 4 20DM 402 Individual Project 1 4 40DM 403 Product Development Project 1 4 20



have accumulated at least 100 credits from the course curriculum. 11.45.28 In order to progress to the third year of the course, a student must have

accumulated at least 220 credits from the course curriculum including no fewer than 100 credits at Level 2 or above.

11.45.29 In order to progress to the fourth year of the course, a student must have accumulated at least 360 credits from the course curriculum including no fewer than 100 credits at Level 3 or above.


(i) the first assessed attempt at compulsory and specified optional classes which are taken in the second, third and fourth year of the course;


Award 11.45.31 BSc with Honours: In order to qualify for the award of the degree of

BSc with Honours in Product Design and Innovation, a candidate must have accumulated no fewer than 480 credits including those for the class DM 402 Individual Project 1.

11.45.32 BSc: In order to qualify for the award of the degree of BSc in Product Design and Innovation, a candidate must have accumulated no fewer than 360 credits from the course curriculum. Notwithstanding Regulation 11.1.10, these must include no fewer than 100 credits at Level 3 or above.

11.45.33 Diploma of Higher Education: In order to qualify for the award of a Diploma of Higher Education in Product Design and Innovation, a candidate must have accumulated no fewer than 240 credits from the course curriculum.

11.45.34 Certificate of Higher Education: In order to qualify for the award of a Certificate of Higher Education in Product Design and Innovation, a candidate must have accumulated no fewer than 120 credits from the course curriculum.


a degree of BSc in Product Design and Innovation may be transferred to the degree of BEng in Engineering Studies.


Production Engineering and Management

BEng with Honours in Production Engineering and ManagementBEng in Production Engineering and ManagementDiploma of Higher Education in Production Engineering and ManagementCertificate of Higher Education in Production Engineering and Management



Honours students. Transfer to the MEng degree of Production Engineering and Management is possible up to the end of third year subject to satisfying the appropriate progress requirements.






Management 1 20

MM 115 Mathematics 1D 1 20



follows:




follows:


DM 304 Integrating Studies 3 3 20DM 305 Innovation Management 3 20DM 307 Production and Operations Management 3 20DM 308 Production Techniques 2 3 20DM 309 Mechatronics Design and Applications 3 20

Optional Classes20 credits chosen from:DM 300 Design Emotion and Experience 3 20DM 302 Design Interaction 3 20DM 303 Engineering Design 3 20DM 306 Product Development 3 20DM 400 Advanced Design Methods 4 20


follows:


DM 401 Advanced Product Design and Manufacture 4 20DM 402 Individual Project 1 4 40DM 403 Product Development Project 1 4 20DM 404 Quality Management 4 20

Optional Classes

20 credits chosen from the list of optional classes in Regulation 11.45.45.

Combination Classes11.45.47







accumulated at least 220 credits from the course curriculum including 100 credits at Level 2 or above.



(i) the first assessed attempt at compulsory and, if appropriate, specified optional classes which are taken in the second, third and fourth year of the course.



BEng with Honours in Production Engineering and Management, a candidate must have accumulated no fewer than 480 credits from the course curriculum including those for the class DM 402 Individual Project 1.

11.45.53 BEng: In order to qualify for the award of the degree of BEng in Production Engineering and Management, a candidate must have accumulated no fewer than 360 credits from the course curriculum. Notwithstanding Regulation 11.1.10, these must include no fewer than 100 credits at Level 3 or above.

11.45.54 Diploma of Higher Education: In order to qualify for the award of a Diploma of Higher Education in Production Engineering and Management, a candidate must have accumulated no fewer than 240 credits from the course curriculum.

11.45.55 Certificate of Higher Education: In order to qualify for the award of a Certificate of Higher Education in Production Engineering and Management, a candidate must have accumulated no fewer than 120 credits from the course curriculum.


the BEng in Production Engineering and Management may be transferred to the degree of BEng in Engineering Studies.


Sports Engineering

BEng with Honours in Sports EngineeringBEng in Sports EngineeringDiploma of Higher Education in Sports EngineeringCertificate of Higher Education in Sports Engineering



Honours students.





DM 100 Design 1 1 20DM 101 Integrating Studies 1 1 20DM 102 Introduction to Production Engineering and

Management 1 20DM 103 Technology Concepts 1 2065 103 Human Anatomy and Physiology 1 20



follows:


65 201 Biomechanics of Human Movement – Theory 2 2065 202 Biomechanics of Human Movement –

Measurement 2 20

DM 200 Design 2 2 20DM 204 Integrating Studies 2 2 20DM 205 Production Techniques 1DM 206 Sports Engineering Module 2 20


follows:


65 303 Physiology of Sport and Exercise 3 20DM 303 Engineering Design 3 20DM 304 Integrating Studies 3 3 20DM 306 Product Development 3 20DM 309 Mechatronics Design and Applications 3 20

Optional Classes20 credits chosen from:DM 307 Production and Operations Management 3 20DM 308 Production Techniques 2 3 20DM 400 Advanced Design Methods 4 20DM 404 Quality Management 4 20


follows:


DM 402 Individual Project 1 4 40DM 403 Product Development Project 1 4 2065 4xx Sport and Injury and Rehabilitation 4 2065 4xx Advanced Topics in Human Movement 4 20






Final Honours Classification

11.45.70 The final Honours classification will normally be based on:(i) the first assessed attempt at compulsory and, where

appropriate, specified optional classes which are taken in the second, third and fourth year of the course;



BEng with Honours in Sports Engineering, a candidate must have accumulated no fewer than 480 credits from the course curriculum including those for the class DM402 Individual Project 1.

11.45.72 BEng: In order to qualify for the award of the degree of BEng in Sports Engineering, a candidate must have accumulated no fewer than 360 credits from the course curriculum. Notwithstanding Regulation 11.1.10, these must include no fewer than 100 credits at Level 3.

11.45.73 Diploma of Higher Education: In order to qualify for the award of a Diploma of Higher Education in Sports Engineering, a candidate must have accumulated no fewer than 240 credits from the course curriculum.

11.45.74 Certificate of Higher Education: In order to qualify for the award of a Certificate of Higher Education in Sports Engineering, a candidate must have accumulated no fewer than 120 credits from the course curriculum.


the BEng in Sports Engineering may be transferred to the degree of BEng in Engineering Studies.

12.45 Department of Design, Manufacture and Engineering Management

Product Design Engineering

MEng in Product Design Engineering


Status of the Course12.45.1 The course is at Integrated Masters level. Transfer to the BEng degree

in Product Design Engineering is possible at any time, subject to satisfying the appropriate progress requirements.






Management 1 20MM 115 Mathematics 1D 1 20



follows:




follows:


DM 303 Engineering Design 3 20DM 304 Integrating Studies 3 3 20DM 306 Product Development 3 20DM 308 Production Techniques 2 3 20DM 309 Mechatronics Design and Applications 3 20

Optional Classes20 credits chosen from:DM 300 Design Emotion and Experience 3 20DM 302 Design Interaction 3 20DM 305 Innovation Management 3 20DM 307 Production and Operations Management 3 20DM 404 Quality Management 4 20

Fourth Year



DM 400 Advanced Design Methods 4 20DM 401 Advanced Product Design and Manufacture 4 20DM 402 Individual Project 1 4 40DM 403 Product Development Project 1 4 20


Fifth Year12.45.7 All students shall undertake classes amounting to 120 credits as

follows:


DM 500 Individual Project 2 5 40DM 501 Product Development Project 2 5 20DM 502 Research Studies 5 20

Optional ClassesNo fewer than 40 credits chosen from:Xx 5xx Global Product Development 5 20Xx 5xx Global Trends, Strategy and Technology 5 20Xx 5xx Managing Value and Supply Networks 5 20

Combination Classes 12.45.8

Class^ Credits Comprises

EE 274 Electrical and Electronic Engineering




Progress 12.45.9 In order to progress to the second year of the course, a student must




12.45.12 In order to progress to the fifth year of the course, a student must have accumulated at least 480 credits from the course curriculum including 100 credits at Level 4 or above.

Final Classification12.45.13 The final classification for the degree of MEng in Product Design

Engineering will normally be based on:(i) the first assessed attempt at compulsory and, where

appropriate, specified optional classes taken in the second, third, fourth and fifth years;


Award 12.45.14 MEng: In order to qualify for the award of the degree of MEng in

Product Design Engineering, a candidate must have accumulated no fewer than 600 credits from the course curriculum including those for the classes DM 402 Individual Project 1 and DM 500 Individual Project 2.

Transfer12.45.15 A student who fails to satisfy the progress or award requirements for

the degree of MEng may be transferred to a degree of BEng in Product Design Engineering.


Production Engineering and Management

MEng in Production Engineering and Management


Status of the Course12.45.21 The course is at Integrated Masters level. Transfer to the BEng degree

in Production Engineering Management is possible prior to the fourth year, subject to satisfying the appropriate progress requirements.





DM 100 Design 1 1 20DM 101 Integrating Studies 1 1 20DM 102 Introduction to Production Engineering and

Management 1 20MM 115 Mathematics 1D 1 2016 132 Engineering Mechanics 1 1 20



follows:




follows:


DM 304 Integrating Studies 3 3 20DM 305 Innovation Management 3 20DM 307 Production and Operations Management 3 20DM 308 Production Techniques 2 3 20DM 309 Mechatronics Design and Applications 3 20

Optional Classes20 credits chosen from:DM 300 Design Emotion and Experience 3 20DM 302 Design Interaction 3 20DM 303 Engineering Design 3 20DM 306 Product Development 3 20DM 400 Advanced Design Methods 4 20


follows:


DM 401 Advanced Product Design and Manufacture 4 20DM 402 Individual Project 1 4 40DM 403 Product Development Project 1 4 20DM 404 Quality Management 4 20


Fifth Year12.45.27 All students shall undertake classes amounting to 120 credits as

follows:


DM 500 Individual Project 2 5 40DM 501 Product Development Project 2 5 20DM 502 Research Studies 5 20

Optional Classes40 credits chosen from:56 5xx Global Product Development 5 2056 5xx Global Trends, Strategy and Technology 5 2056 5xx Managing Value and Supply Networks 5 20

Combination Classes12.45.28





Progress 12.45.29 In order to progress to the second year of the course, a student must


accumulated at least 220 credits from the course curriculum including 100 credits at Level 2.

12.45.31 In order to progress to the fourth year of the course, a student must have accumulated at least 360 credits from the course curriculum including 100 credits at Level 3.

12.45.32 In order to progress to the fifth year of the course, a student must have accumulated at least 480 credits from the course curriculum including 100 credits at Level 4.

Final Classification

12.45.33 The final classification for the degree of MEng in Production Engineering and Management will normally be based on:(i) the first assessed attempt at compulsory and, where

appropriate, specified optional classes taken in the second, third, fourth and fifth years;


Award 12.45.34 MEng: In order to qualify for the award of the degree of MEng in

Production Engineering and Management, a candidate must have accumulated no fewer than 600 credits from the course curriculum including those for the classes DM 402 Individual Project 1 and DM 500 Individual Project 2.

Transfer12.45.35 A student who fails to satisfy the progress or award requirements for

the degree of MEng may be transferred to the degree of BEng in Production Engineering and Management.

· web viewstatus of the courses 11.45.1all students are normally admitted in the first instance...

Documents