· web viewmanual intervention is needed to change the boot mode from legacy to uefi in bios....

29
Dell Wyse Windows WE8S MR1 Release Notes

Upload: lycong

Post on 31-Mar-2018

245 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Dell Wyse Windows WE8S MR1Release Notes

Page 2: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Contents

Release Type and Definition.............................................................................................................................3

Version and Build.....................................................................................................................................3

Release Date............................................................................................................................................3

Previous Versions.....................................................................................................................................3

Importance.......................................................................................................................................................3

Requirements/Prerequisites............................................................................................................................3

Installation Instructions...................................................................................................................................3

New Features...................................................................................................................................................4

OS Architecture................................................................................................................................................5

WE8S (64bit) Image structure......................................................................................................................5

WE8S (64bit) Build behavior........................................................................................................................7

Fixed Issues and Enhancements.....................................................................................................................13

Known Issues..................................................................................................................................................13

Software Information.....................................................................................................................................13

Build Details...............................................................................................................................................13

Energy Star Test.........................................................................................................................................15

Used and Free space details.......................................................................................................................15

OS Components.............................................................................................................................................15

Driver Details..............................................................................................................................................15

Application Details.....................................................................................................................................17

QFE’s Added in the Release............................................................................................................................19

Updates......................................................................................................................................................19

Security Updates........................................................................................................................................20

Total Hotfixes Present in this build.............................................................................................................20

Support Information......................................................................................................................................21

Dell Wyse Windows WES7 Feature Release 5 Page 2 of 24

Page 3: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Release Type and DefinitionAs part of continuous focus on product improvement, Dell Wyse Product Marketing team has planned for a new maintenance release – WE8S MR1. This WE8S MR1 (Windows Embedded 8 Standard) v10.02 Build 913 is 64bit image for Z90D8, Z90Q8, D90D8 & D90Q8 platforms. This release provides support many new features. This release also consists of fixes for some of the issues reported internally and by the customers.

Version and BuildV10.02, Build 913

Release DateJune 5th, 2015

Previous VersionsHardware (SP2 Platforms)

Version

Z90D8, Z90Q8, D90Q8

907

D90D8 908

ImportanceDell Wyse recommends applying this update during your next scheduled update cycle. The update contains major feature enhancements or changes that help keep your system software current and compatible with other system modules.

Requirements/Prerequisites Builds for the respective platforms can be pushed only to the respective

clients. Builds can be pushed using WDM 5.0 MR2 or higher with recommended

Hotfix as per WDM Admin Guide.

Installation Instructions Extract build in .exe format using 7Zip (compressed format; Merlin

format - no .i2d image). Due to the size of the image, 7Zip cannot directly uncompress the image.

You need to right click on the .exe, select 7Zip, and extract.

Dell Wyse Windows WES7 Feature Release 5 Page 3 of 24

Page 4: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Note- Builds can be pulled and pushed using Dell WDM 5.0 MR 2 or higher.

New FeaturesThe new features included in this release are:

1. Flash.sys

Hostname Calculation and Preservation – Option to enable and disable Hostname Calculation in flash.sys

Customers get an option to disable or enable Host Name Calculation.

Altering the MAC ID for a client doesn’t perform a Host Name Calculation.

Rest of the logic and flow remains the same as older flash.sys implementation

If a host name calculation is required after a change in MAC ID (NIC card change), use MINWITHNET.

2. Event Viewer log preservation (Option to enable and disable preservation of Event viewer logs)

Provides an option to enable or disable Event log saving while Write Filter (UWF or FBWF) is on. This feature allows collecting event logs for debugging or analysis.

3. Dell Client Application (Replacement for Client Information application with new UI) This application contains additional fields for accessing and configuring Custom Fields, RAM Disk, Auto Logon, C-A-D MAP tool and System Short Cuts.

Note: RAM disk Size set to 512 by default in the build.

4. Premium Codecs

The Premium codecs from Microsoft which are part of builds are listed below. Codecs in BOLD were already part of WE8S first release

MPEG-2 Audio and Video Encoder (license required)

Dell Wyse Windows WES7 Feature Release 5 Page 4 of 24

Page 5: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Microsoft Dolby audio decoder (AC-3, E-AC-3) (license required)

Microsoft DTV-DVD Audio Decoder (MPEG-2, AAC) (license required)

Microsoft DTV-DVD Video Decoder (MPEG-2, H.264) (license required)

MPEG Layer-3 Audio Codecs (MP3) (license required)

MPEG-4 Decoders (license required)

Windows Media Video Codecs (VC-1) (license required)

5. Ericom Web Connect

Ericom web connect client v5.8.0 is an application which on initializing will download the application files & executable files from the Ericom web connect server.

For more information, refer to www.ericom.com/doc/TechnicalReferences/PTWC_Manual.pdf

This document will provide information about server and client architecture.

6. Admin Guide on “Admin” Desktop

The admin guide is in .html format. All related files are available in C:\windows\setup\help folder

and the shortcut to the file is on “Admin” desktop.

OS Architecture WE8S (64bit) Image structure All WE8S (64bit) builds are in Merlin format and of 16GB size. All builds have 5 partitions – 100 MB Merlin, 300 MB Windows Recovery,

100MB EFI System, 128 MB MSR and the remaining as OS partition. 128MB MSR partition will not be visible in Disk Manager. Partition structure is based on the GPT partition table.

100 MB EFI system partition is a FAT32 displayed without the Drive Letter and file system property in Disk Management. 100 MB EFI system partition contains Merlin BA (Boot Agent).

Dell Wyse Windows WES7 Feature Release 5 Page 5 of 24

Page 6: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

WSI-Builds can be pulled and pushed using WSI. PXE push/pull through WSI is not supported by default; Boot Mode is set to UEFI in BIOS and requires change in the BIOS settings. Boot mode must be changed to Legacy in BIOS to support PXE pull/push. If the pull is performed using PXE, boot mode sets to Legacy in BIOS and the WE8S 64 bit OS will not restart by default in an imaged client as it requires UEFI as the Boot mode. Manual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended.

WDM- Only Non-PXE image push is supported for Z90D8, D90D8, and Z90Q8 & D90Q8

USB- Not Tested as tool is not supported for Image Push.

For more detail on imaging for platforms Z90D8, D90D8, Z90Q8 & D90Q8, refer the following table:

Imaging Tool

Push/Pull

Supported

Not Supported

Comment

WSI Push PXE (with Legacy Boot Mode)

PXE (Native UEFI)

In case of new flash without having merlin non-PXE

Non-PXE (Native UEFI)

In case of device already having merlin non-PXE and bios has been set for UEFI mode.

Pull PXE (with Legacy Boot Mode)

PXE (Native UEFI)

WSI pull (Legacy Boot Mode) will not pull bios with UEFI mode/secure boot mode enabled. Please make sure to enable UEFI/Secure boot and pull the image using merlin-non-PXE.

Non-PXE (Native UEFI)

WDM Push Non-PXE (Native UEFI)

PXE (Legacy)

Dell Wyse Windows WES7 Feature Release 5 Page 6 of 24

Page 7: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Pull Non-PXE (Native UEFI)

PXE (Legacy)

USB ImagingPush/pull

Not supported

PXE (Legacy)

Images are supported only with 4 GB RAM/16 GB Flash Combinations. Image (Build package) files are in compressed format. By default, OS Files/folders and C drive are in compressed state. Therefore,

any files/folders will be compressed later.

WE8S (64bit) Build behavior

Post Script Behavior: Introduced an extra restart after installation of all driver applications in the

post script phase in order to ensure proper functionality of the installed applications in the build. So, there are two restarts in post script phase.

Write Filter: Unified Write Filter (UWF) & File Based Write Filter (FBWF) with UWF as the

primary write filter. UWF cache size is 512 MB FBWF cache size is 512 MB

UWF notification area settings modified to include default settings for warning notification.

The following folder/files are in the UWF & FBWF exclusion list to support their respective features.

UWF exclusions

\Program Files\Windows Defender

\Program Files(x86)\Windows Defender

\Windows\WindowsUpdate.log

\Windows\Temp\MpCmdRun.log

\ProgramData\Microsoft\Windows Defender

Dell Wyse Windows WES7 Feature Release 5 Page 7 of 24

Page 8: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

\Users\User\AppData\LocalLow

\Users\Administrator\AppData\LocalLow

\WebConnect

\Program Files\Ericom PowerTerm Webconnect

\Users\User\AppData\Roaming\Ericom

\Users\Admin\AppData\Roaming\Ericom

\Wyse\WCM\ConfigMgmt

\Regfdata

FBWF exclusions

\WebConnect

\Program Files\Ericom PowerTerm Webconnect

\Users\User\AppData\Roaming\Ericom

\Users\Admin\AppData\Roaming\Ericom

\Windows\CCM\ServiceData

\Windows\SMSCFG.ini

\Windows\CCM\Ccmstore.sdf

\Windows\StateMessageStore.sdf

\Windows\InventoryStore.sdf

\Windows\CCM\wedmtrace.log

\Windows\CCM\Clientstate.dat

\ProgramData\Microsoft\Windows Defender

\Windows\Temp\MpCmdRun.log

\Windows\WindowsUpdate.log

\Program Files\Windows Defender

\Program Files (x86)\Windows Defender

Dell Wyse Windows WES7 Feature Release 5 Page 8 of 24

Page 9: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

\Regfdata

\Users\Admin\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\

\Users\Admin\AppData\Roaming\Microsoft\Windows\Cookies\Low\

\Users\User\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\

\Users\User\AppData\Roaming\Microsoft\Windows\Cookies\Low\

\Wyse\WCM\ConfigMgmt

\Users\User\AppData\LocalLow

\Users\Administrator\AppData\LocalLow

Internet Explorer:IE cache settings – 100MB

Temporary Internet files, cache, history locations are set to C: instead of Z: to support Metro IE & IE 10 completely.

Citrix Receiver: By default, Citrix receiver icon is available in the notification area. To set

server URL, start PNA by using Citrix receiver icon which is present in desktop or start menu and not by clicking notification area icon directly.

USB redirection is functional for all the users of the client machine with all published Xendesktops, irrespective of the setting “Simplify device connections for me” in the Xendesktop connection preferences UI.

User Accounts: Admin – Administrators group User – Users Group No Built-in Administrator account is enabled

Some Items present in Start Menu tool bar are not available due to design limitations.

Application Launcher:You can use Windows 8 Application Launcher to start a Windows 8 app immediately after a user signs in to a Windows Embedded 8 Standard (Standard 8) device and to restart the application when the application exits.

Dell Wyse Windows WES7 Feature Release 5 Page 9 of 24

Page 10: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

You can configure Windows 8 Application Launcher to start different applications for different users.

Adobe OOBE Package:Included Adobe OOBE Package to support ActiveX functionality in the build. It also resolves CIR 81025, TIR73228 & TIR80885.

1. You can now access HTML5 content on websites. This does not imply HTML5 videos.

2. It supports deploying of monthly Adobe KB’s released by Microsoft.3. This package does not appear under Client Info and Programs and Features.

To validate if it is installed successfully, run the following command from an elevated command prompt :

“Dism /online /get-packages>pkg.txt”. This command will dump all the installed packages on the build.

Open pkg.txt in notepad and search for “Microsoft-Windows-Embedded-Adobe-Flash-For-Windows-Package~31bf3856ad364e35~amd64~~6.2.9200.16384”. This is the Package Identity.

RemoteFX policies:Added tsusbhubfilter module in the build to support redirection using RemoteFX policies.

CAD MAP tool:To use the Ctrl+Alt+Del Screen of a VDI application, it is required to remember the shortcut of that particular application. For example, for Citrix, the shortcut is Ctrl+F1. So, it is convenient if a utility in the backend does this for the user, instead of the user pressing Ctrl+Alt+Del always. The basic Feature of the C-A-D Tool is to map the Ctrl + Alt + Del Keys of VDI Applications to appropriate ones so that it displays the C-A-D screen of that VDI Application.The following table shows mapping of keys for different VDI Applications which are currently supported by the tool.

S.No VDI Application

Key Mapping

1 RDP Ctrl + Alt + End

2 Citrix Ctrl + F1

Dell Wyse Windows WES7 Feature Release 5 Page 10 of 24

Page 11: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

3 VMView Ctrl + Alt + Insert

4 vWorkSpace Ctrl + Alt + End

Driver Applications:1. Only Intel Wireless and Bluetooth drivers are part of the build.2. Not included ATI driver application as part of the build.3. Dell Keyboard driver Software (KM632) included as a part of the build. This

is a Software to Provide Caps Lock Status Indication on the Computer Screen

4. Included Dell Open Print Driver application as part of the build.

Registry Filter:Added Monitored Key for applications to function in write filter enable state. The monitored keys are reserved for these applications and are not used for any other Applications. The path for the Registry filter monitored key is:

“HKLM\System\CurrentControlSet\Services\RegFilter\Parameters\MonitoredKeys”

Applications Monitored Key

WCM 2

SCCM 3

Even log Saving 4

CAD Map Tool 5

ConfigMgr 2012 SP1 Client:ConfigMgr support is provided only in FBWF enabled condition and in UWF enabled condition, native support is not provided by Microsoft yet. But there are workarounds to support ConfigMgr in UWF as per the Microsoft link provided in http://technet.microsoft.com/en-us/library/dn270483.aspx.

WCM:1. WCM applet Present only for Admin user.

Dell Wyse Windows WES7 Feature Release 5 Page 11 of 24

Page 12: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

2. During logon to Users WCM launch screen will come and go by itself in write filter Enable state.

3. InstallerLog folder has been created inside C:\.

For more details on the above application docs refer SRS:

https://mcbu-jira.wyse.com/wiki/display/TPGMT/WE8S+MR1+Release+Page

For a few features, there are some additional supported documents available which describes them in detail. Below is the wiki path where you can refer to those documents

https://mcbu-jira.wyse.com/wiki/display/TPGMT/Windows+Common+Documents

Custom Build Image Behavior:

WDM Image push fails on WE8S MR1 913 custom builds running the HAgent version 6.3.4.5. To solve the issue mentioned earlier on custom builds:

Update to HAgent version 6.3.4.8 or higher and then push the image from WDM.

Note:

1. To configure Bitlocker with TPM, Use group policy “Configure TPM platform validation profile for native UEFI firmware configurations”

2. Refer ‘Event Viewer Errors.docx’ for Event viewer errors/warnings3. 2MB BIOS is no more supported as it does not have support for UEFI.4. To update Windows defender definition, you may have to increase the

Write Filter threshold value. 5. In custom start menu in the taskbar, power control options under Power

will not support localization for languages other than English.6. Dell Wyse keyboard Filter (DWKbFilterWatchdog) service will be in

Automatic but will be in stopped state by default. We need to enable it when there is a requirement. Although Wyse keyboard filter service is set to automatic, it will not be started unless check the check box for “Enable CAD (Ctrl+Alt+Del) Map inside Client information to enable the Wyse keyboard filter. It will be enabled only after restart.

7. Microsoft keyboard filter and Dialog Box filter service will be in disabled state by default. We need to enable it on need basis.

Not Supported:

Dell Wyse Windows WES7 Feature Release 5 Page 12 of 24

Page 13: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

No Built-in Administrator account. No ATI Driver Application. Windows 8 specific Features which are not supported in MR1 - Measured

Boot, Fast Boot, Refresh PC & Reset PC, Antimalware, custom Branding. Windows store is not supported WE8S specific Features which is not supported in MR1 -Microsoft

Windows Embedded Lockdown Manager(ELM) No Metro RDP by default in the build. This application need to be

downloaded from windows store. Boot from USB is not supported by default. We need to enable this option

in BIOS for supporting the same. Native PXE imaging support is not there in this image version as the boot

mode is set to UEFI. 2MB BIOS is no more supported as it does not have support for UEFI boot

mode.

Fixed Issues and EnhancementsCIR/TIR Number

Description

CIR78583 UWF Memory Leak

CIR76728 2820472:WE8S Z90D8 B907 - IE10 and Adobe Flash video not working but audio works with vimeo.com and espn.com.

CIR80442 Control Panel Applet to Enable Ctrl-Alt-Del Pass-Through Utility

CIR80679 “VNC doesn't work with D90D8 without Monitor connected”

Fixes for backing up/restoring license files.

Known IssuesTracked InternallyIssue Id Summary

CIR78359 WES8 (linux) boot partition will not activated

CIR82429D90Q7 & D90Q8 shows high latency and sluggish response with HDX 3D Pro

CIR83825WES8 login/logoff gets slow after these devices has joined into the domain

Software Information

Dell Wyse Windows WES7 Feature Release 5 Page 13 of 24

Page 14: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Build Details

Platform-specific Details

Z90D8 Platform

Version 10.02

Build Number 913.15GB

Build WSI Package Name FZF0_0913_16GB.exe

BIOS DetailsPlatform Z90D8

Version 5.0R (4MB)

Build File Name BIOS.fd

D90D8 Platform

Version 10.02

Build Number 913.15GB

Build WSI Package Name FDF0_0913_16GB.exe

BIOS DetailsPlatform D90D8

Version 5.0R (4MB)

Build File Name BIOS.fd

Z90Q8 Platform

Version 10.02

Build Number 913.15GB

Build WSI Package Name FOF0_0913_16GB.exe

BIOS DetailsPlatform Z90Q8

Version 1.0L (8MB)

Build File Name BIOS.fd

D90Q8 Platform

Dell Wyse Windows WES7 Feature Release 5 Page 14 of 24

Page 15: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Version 10.01

Build Number 913.15GB

Build WSI Package Name FOF0_0913_16GB.exe

BIOS DetailsPlatform D90Q8

Version 1.0L (8MB)

Build File Name BIOS.fd

Energy Star TestOur product meets the ENERGY STAR version 6.0 thin client requiremenThe following are the values displayed by default in control panel applet of Power Options:

Supports WOL Power off states Supports Idle State wake Screen off timer set to 10 minutes Sleep timer set to 15 minutes

Used and Free space detailsPlatforms Flash Size Used Space Free Space

Z90D8 16 GB 11.6 GB 2.66 GBD90D8 16 GB 11.2 GB 3.04 GBZ90Q8 16 GB 11.2 GB 3.01GBD90Q8 16 GB 11.6 GB 2.66 GB

Note:

Used space and free space details are approximate. It will vary depends on the Drivers/Applications installed based on hardware configuration

OS ComponentsDell Wyse Windows WES7 Feature Release 5 Page 15 of 24

Page 16: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Driver DetailsDrivers/Files

Platform Version ( If applicable)

Display Adapter

Z90D8 AMD Radeon HD 6320 Graphics - Ver 13.351.1001.0

D90D8 AMD Radeon HD 6250 Graphics - Ver 13.351.1001.0

Z90Q8 AMD Radeon™ HD 8400E - Ver 13.351.1001.0

D90Q8 AMD Radeon™ HD 8330E - Ver 13.351.1001.0

Ethernet Adapter

Z90D8/D90D8/Z90Q8/D90Q8 Inventec PCIe GBE Family Controller- 8.2.207.2014

Audio Z90D8/D90D8/Z90Q8/D90Q8 AMD High Definition Audio Device-8.0.0.8815

Realtek High Definition Audio – 6.0.1.7260

Wireless Adapter

Z90D8/D90D8/Z90Q8/D90Q8 Intel® Dual Band Wireless-AC 7260 - 16.10.0.5

Wireless Application

Z90D8/D90D8/Z90Q8/D90Q8 Intel® PROSet/Wireless Software - 16.11.0

Bluetooth Z90D8/D90D8/Z90Q8/D90Q8 Intel® Wireless Bluetooth®- 17.1.1411.504

Bluetooth Application

Z90D8/D90D8/Z90Q8/D90Q8 Intel® Wireless Bluetooth® (Path version 17.1.1449.356) - 17.1.1411.0506

Dell Open Printer

Z90D8/D90D8/Z90Q8/D90Q8 Dell Open Print Driver - 1.91.7882.0(Programs and Features)

Dell Keyboard Caps lock Application

Z90D8/D90D8/Z90Q8/D90Q8 Dell KM632 Wireless Keyboard Caps Lock Indicator - 2.1.10.0604(Programs and Features)

TPM Z90D8/D90D8/Z90Q8/D90Q8 6.2.9200.16686

Wyseramdisk.sys (Wyse RAM

Z90D8/D90D8/Z90Q8/D90Q8 5.0.2183.5

Dell Wyse Windows WES7 Feature Release 5 Page 16 of 24

Page 17: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Disk driver)USB3.0 Driver Z90D8/D90D8 Renesas USB 3. 0 eXtensible

Host Controller – 0096 (Microsoft) – Ver 6.2.9200.16656

Z90Q8/D90Q8 AMD USB 3. 0 eXtensible Host Controller – 0100 (Microsoft) – Ver 6.2.9200.16656

Flash.sys Z90D8/D90D8/Z90Q8/D90Q8 1.0.6.0

Application DetailsApplications/Features/Files Version ( If applicable)RDC 6.2.9200.16465 (RDP 8.0 Supported)

Citrix Receiver (Standard) 4.2.0.10 (In Citrix About)Citrix Online Plugin -14.2.0.10 (In Client Application , Programs and Features)

Citrix HDX Real Time Media Engine 1.6.0.6VMware Horizon Client 3.3.0.25749

(In Client Application , Programs and Features)

3.3.0 build-2507564 (In About VMware Horizon Client)

vWorkspace Connector for windows 8.5.307.1955Power Term Interconnect Version is 10.2.0.0.20140813.1 .

(Version info does not show in client info & does not launch from start menu toolbar. Only opens with Start menu tile)

Power Term WebConnect Start 5.8.0Windows Media Player 12.0.9200.16578 (About Windows Media

Player)

12.0.9200.16384 (Client Application)Internet Explorer 10.0.9200.17148 (About Internet

Explorer)

Dell Wyse Windows WES7 Feature Release 5 Page 17 of 24

Page 18: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

10.00.9200.16384 (Client Application)Adobe Flash player – Plugin

Adobe Flash player - ActiveX

15.0.0.239

15.0.0.223

ActiveX is coming from Out of band package. Hence it will not be displayed in Client Application & Programs and Features & version depends on the ActiveX related KB which we are installing in the build.

Tight VNC 2.6.4.0

Microsoft Lync Vdi 2013 15.0.4420.1017

.NET Framework 4.5.1WCM 1.3.3.2ConfigMgr 2012 R2 Client 5.00.7804.1000WSUS SupportedBit locker with TPM SupportedWindows Multi touch SupportedWindows Defender with latest definition

1.191.3788.0

Microsoft Management Console Management Console 3.0

Version 6.2 (Build 9200)Microsoft Silverlight 5.1.30514.0Background Intelligent Transfer Service (BITS)

Supported

MSXML SupportedXML Paper Specification (XPS) SupportedNetwork Access Protection SupportedCredential Roaming SupportedWPA2 SupportedCredSSP SupportedDell Wyse Wallpaper on All Users SupportedDirectX 11Hagent.exe (support for FBWF and EWF)

6.3.4.5

HAgent_UI.exe 1.0.2.25WDM.exe 1.0.3.3DellThinClientApplication.exe 10.0.0.0

Dell Wyse Windows WES7 Feature Release 5 Page 18 of 24

Page 19: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

(New Client Application)Unified Write Filter manager -Uwfmgr.exe (File Version)

2.0.666.0

UWF system tray UI – UWFTray.exe 1.0.4.3UWF Service – UWFSvc.exe 1.0.4.3File-based write filter manager – fbwfmgr.exe (File Version)

2.0.449.0

FBWF System Tray UI - FBWFTray.exe 1.0.2.1

FBWF Service – FBWFSvc.exe 1.0.2.1WriteFilter_Control.exe

(FBWF<-->UWF switching)

1.0.0.5

Registry Filter Supported

NetXClean.exe 3.0.0.6

WindowsEmbeddedTest.exe (equivalent to WES7Test.exe)

2.0.0.9

Drvmgmt.exe 1.0.2.15

BAActive.exe 1.0.0.7

Disk_Size.exe 3.0.0.4

Sysprep4man scripts TPM, MUI & ConfigMgr2012 R2 Client & MUI Supported (part of build)

LicenseStore.exe 1.0.0.9CAD MAP Tool

DWKbFilter.sys

DWKbFilterMon.exe

DWKbFilterWatchdog.exe

2.3.0.1

2.2.0.2

2.2.0.2Windows Time Service Supported

QFE’s Added in the ReleaseTotal QFE's Present in this build (Updated till November, 2014)

UpdatesKB3004150 KB2822241 KB2811660 KB3008627 KB3000853

Dell Wyse Windows WES7 Feature Release 5 Page 19 of 24

Page 20: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

KB2998527 KB2996851 KB2976536 KB2995387 KB2993651

KB2984005 KB2976978 KB2955163 KB2981685 KB2975331

KB2967916 KB2962407 KB2903938 KB2934016 KB2929755

KB2928678 KB2913152 KB2879967 KB2891804 KB2889784

KB2883201 KB2882780 KB2869628 KB2876415 KB2768703

KB2871777 KB2871389 KB2845533 KB2862768 KB2862073

KB2855336 KB2850674 KB2818604 KB2843630 KB2836988

KB2769034 KB2821895 KB2779768 KB2808679 KB2800033

KB2795944 KB2785094 KB2756872 KB2777294 KB2770917

KB2769166 KB2769165 KB2881468

Security UpdatesKB3010788 KB3006226 KB3005607 KB3003743 KB3003057

KB3002885 KB2993958 KB2992611 KB2988948 KB2978127

KB2978121 KB2979577 KB2979571 KB2978668 KB2978042

KB2977766 KB2977292 KB2976897 KB2973501 KB2973351

KB2973201 KB2973113 KB2972280 KB2972212 KB2972101

KB2971850 KB2968295 KB2966827 KB2966825 KB2961072

KB2920189 KB2912390 KB2909210 KB2900986 KB2898870

KB2894855 KB2894851 KB2893294 KB2892074 KB2887069

KB2884256 KB2871997 KB2868626 KB2868038 KB2864202

KB2864058 KB2863725 KB2862973 KB2862966 KB2862335

KB2862330 KB2862152 KB2861704 KB2861194 KB2847311

KB2840633 KB2835361 KB2832418 KB2829254 KB2742616

KB2736693 KB2813430 KB2807986 KB2757638 KB2727528

Total Hotfixes Present in this build Dell Wyse Windows WES7 Feature Release 5 Page 20 of 24

Page 21: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

KB2829069 KB2798804 KB2798802 KB2794119 KB2798805

KB3037597

Support InformationSupported Peripheral DevicesCategory: Smart CardReaders,

Model (P/N)

ActivCard Smart CardReader

ActividentityUSB Reader

Cherry Smart CardKeyboard

RS 6700 USB

Gemalto Smart CardReader

GemPC Twin

Omnikey Smart CardReader

Omnikey 3121

Omnikey Smart CardReader

Omnikey 3021

Cherry Smart CardReader

Cherry GmbH Smart TerminalXX44

Smart Card Reader SCR 3310Category: ConvertersMCT USB to ParallelConverter Cable

920207-02L

Category: PDAsUSB Blackberry 7000 & 8000

SeriesCategory: HeadphonesNokia Bluetooth HeadsetPlantronics- Blackwire 720 (Head set) Blackwire 720Plantronics- Blackwire 620 (Head set) Blackwire 620Plantronics- Blackwire 435(Head set) Blackwire 435Plantronics- Blackwire C435(Ear phone) Blackwire C435Plantronics- Blackwire C420(Head set) Blackwire C420Plantronics- Blackwire C320(Head set) Blackwire C320Plantronics Amplifier DA60 USB Adapter DA 60Jabra Quaded headset jabraSAVI 440 Savi 440Plantronics C310M C310MCategory: MonitorsViewsonic VX 2258 VX 2258Dell 1905FP Monitor 1905FPDell- E1912H Monitor E1912H

Dell Wyse Windows WES7 Feature Release 5 Page 21 of 24

Page 22: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Dell- P2210 Monitor P2210Dell-E2014 Tt Monitor E2014 TtDell-E2011H Monitor E2011HDell-P2212H Monitor P2212HDell-P19133 Monitor P19133Dell- P2412H Monitor P2412HDell- E1912H Monitor E1912HDell-S2240 LC Monitor S2240 LCDell-S2340 LC Monitor S2340 LCDell-U2711b Monitor U2711bDell-U3011t LC Monitor U3011t LCDell- E1913C Monitor E1913CDell-P2314 t Monitor (Touch) P2314 tDell-P2714 TC Monitor (Touch) P2714 TCDell U2312 HM Monitor U2312 HMDell 1505 FP Monitor 1505 FPDell S2715H S2715HDell E5515Hc E5515HcDell Z2715Hb Z2715HbDell U2913WMt U2913WMtDell 2215 Hc 2215 HcDell U2715Hc U2715HcDell S2415Hb S2415HbDell D2015HF D2015HFDell U2415b U2415bDell E2011Hc E2011HcDell E2715H E2715HCategory: PrintersHP Deskjet Printer Mobile 100 Mobile 100Canon Laser printer Model 2900 2900HP wireless Inkjet all in one 6525 6525HP laserjet 1320 1320DELL B1260dn Printer B1260dnDELL B1265dnf Printer B1265dnfDELL B1160 B1160Epson LQ-300 - II LQ-300 IICategory: SpeakersCalisto P420 USB Speaker Phone P420Calisto 825 825Calisto 540 540WebcamsMicrosoft webcam HD 1000 HD1000Logitech pro webcam C920 C920Category: Biometric ReadersLumidigm V311-00-01Lumidigm M301-00Lumidigm V302-02-S

Dell Wyse Windows WES7 Feature Release 5 Page 22 of 24

Page 23: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

Category: Pendrives

Lexar JumpDrive 512MBJDSP512-00-540E

Transcend JetFlash 700, 32 GB (USB 3.0) JetFlash 700Transcend JetFlash 500, 16 GB (USB 2.0) JetFlash 500

kingston Data Traveler G3, 16 GB (USB 2.0)Data Traveler G3, 16 GB

kingston Data Traveler G3, 8 GB (USB 2.0) Data Traveler G3, 8 GBSandisk Cruzer Blade 16 GB (USB 2.0) Cruzer Blade 16 GBSandisk Cruzer Blade 8 GB (USB 2.0) Cruzer Blade 8 GBKingston Data Traveler 111, 32 GB (USB 3.0)

Data Traveler 111, 32 GB

Transcend 16 GB (USB 2.0) JetFlash 500Kingston Data Traveler, 16 GB (USB3.0) Data TravelerCategory: Keyboard & MouseDELL Wireless Mouse KM632/0X3KRCDELL Wireless Keyboard KM632/0X3KRCDell USB mouse MS111-PDell USB Keyboard KB212-BDell Wireless Keyboard KM113 KM0113Dell Wireless Mouse KM113 KM0113DELL Bluetooth Mouse WM-524Wyse Keyboard (PS2 &USB) VariousWyse Keyboard KB-3923

Cherry Keyboard

G83-6105IRNFR-2/05

Wyse MouseP/N: 770510-13L

Dell USB Keyboard MO56UCMicrosoft Basic OpticalMouse X800598Category: USB HDD / DVD DriveToshiba 500 GB HDD 3.0 Toshiba ExternalBuffalo Ministation 500 GB USB HDD Buffalo MinistationAsus USB3.0 DVD/Blu-ray Drive Asus BluerayAsus Ext DVDRW 3.0 Asus 3.0Transcend USB 2.0 card reader TS-RDP8KCategory: OthersEpad for signature EPADBelkin Ultra mini USB Hub BelkinSCM Microsystems SCR3311 SCR3311

Dell Wyse Windows WES7 Feature Release 5 Page 23 of 24

Page 24: · Web viewManual intervention is needed to change the boot mode from Legacy to UEFI in BIOS. So, PXE pull is not recommended. WDM- Only Non-PXE image push is supported for Z90D8,

© 2015 Dell Inc.

This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of this publication without express written permission.

Dell Wyse Windows WES7 Feature Release 5 Page 24 of 24