· web viewiso/dis 17777 * welding consumables — covered electrodes for manual metal arc welding...
TRANSCRIPT
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 January to 31 January 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4 Rolling bearings
ISO/CD 5593 Rolling bearings — Vocabulary
ISO/CD 15243
Rolling bearings — Damage and failures — Terms, characteristics and causes
TC 10 Technical product documentation
ISO/CD 6413 Technical drawings — Representation of splines and serrations
TC 12 Quantities and units
IEC/CD 80003-4
Physiological quantities and their units — Part 4: Biology
TC 17 Steel
ISO/CD 3575 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
ISO/CD 13976
Hot-rolled steel sheet in coils of structural quality and heavy thickness
ISO/CD 14590
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
TC 22 Road vehicles
ISO/CD 13400-3
Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3
ISO/CD 11452-3
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic mode (TEM) cell
ISO/CD 19689
Motorcycle and mopeds — Communication between vehicle and external equipment for emissions-related diagnostics — Diagnostic connector and related electrical circuits, specification and use
TC 24 Particle characterization including sieving
ISO/CD 20998-3
Measurement and characterization of particles by acoustic methods — Part 3: Guidelines for non-linear theory
TC 28 Petroleum products and related products of synthetic or biological origin
ISO/CD 4259-1
Petroleum products - Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test
ISO/CD 4259-2
Petroleum products - Precision of measurement methods and results — Part 2: Application of precision data in relation to methods of test
TC 34 Food products
ISO/CD 749 Oilseed residues — Determination of total ash
ISO/CD 18862
Analysis of coffee and coffee products — Determination of acrylamide — Methods using HPLC-MS/MS and GC-MS after derivatization
TC 54 Essential oils
ISO/CD 8896 Essential oil of caraway (Carum carvi L.)
TC 69 Applications of statistical methods
ISO/DTS 17503
Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs
TC 70 Internal combustion engines
ISO/CD 8528-7
Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design
ISO/CD 8528-9
Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations
TC 89 Wood-based panels
ISO/CD 17064
Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary
TC 92 Fire safety
ISO/CD 3008-3
Fire Resistance Test — Door and Shutter Assemblies — Part 3: Horizontally oriented
TC 104 Freight containers
ISO/CD 9897-3
Freight containers — Container equipment data exchange (CEDEX) — General communication codes — Part 3: Tank containers
ISO/CD 9897-4
Freight containers — Container equipment data exchange (CEDEX) — General communication codes — Part 4: Special purpose containers
TC 106 Dentistry
ISO/CD 19490
Dentistry — Sinus elevator
TC 108 Mechanical vibration, shock and condition monitoring
ISO/DTS 14837-32
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
ISO/CD 21940-2
Mechanical vibration — Rotor balancing — Part 2: Vocabulary
TC 113 Hydrometry
ISO/CD 18481
Hydrometry — Liquid flow measurement using end depth method in channels with a free overfall
ISO/DTR 21414
Surface geophysical surveys for hydrogeological studies
TC 156 Corrosion of metals and alloys
ISO/CD 9227 Corrosion tests in artificial atmospheres — Salt spray tests
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO/CD 23551-8
Safety and control devices for gas burners and gas burning appliances — Particular Requirements — Part 8: Multifunctional controls
TC 172 Optics and photonics
ISO/CD 9849 Optics and optical instruments — Geodetic and surveying instruments — Vocabulary
ISO/CD 8980-1
Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses
ISO/CD 8980-2
Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for continuous variation power lenses, including progressive power lenses
ISO/CD 21987
Ophthalmic optics — Mounted spectacle lenses
TC 173 Assistive products for persons with disability
ISO/CD 7176-2
Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs
TC 189 Ceramic tile
ISO/DTR 17870-1
Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and floor tiles
ISO/DTR 17870-2
Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles
TC 199 Safety of machinery
ISO/DTR 22100-3
Safety of machinery — Relationship with ISO 12100 — Part 3: Implementation of ergonomic principles in safety standards
TC 201 Surface chemical analysis
ISO/DTR 18394
Surface chemical analysis — Auger electron spectroscopy — Derivation of chemical information
TC 204 Intelligent transport systems
ISO/CD 14823
Intelligent transport systems — Graphic data dictionary
ISO/CD 19237
Intelligent transport systems — Pedestrian collision mitigation systems — Operation, performance, and verification requirements
TC 205 Building environment design
ISO/CD 16817
Building environment design — Indoor environment — Design process for visual environment
TC 292 Security
ISO/DTS 22318
Societal Security — Business continuity management — Guidance for supply chain continuity
TMB Technical Management Board
ISO/IEC CD Guide 98-5
Evaluation of measurement data — Part 5: Examples of uncertainty evaluation
CASCO Committee on conformity assessment
ISO/CD 17034
General requirements for the competence of reference material producers
JTC 1 Information technology
ISO/IEC CD 9594-1
Information technology — Open Systems Interconnection — The Directory — Part 1:
ISO/IEC CD 9594-2
Information technology — Open Systems Interconnection — The Directory — Part 2: Models
ISO/IEC CD 9594-3
Information technology — Open Systems Interconnection — The Directory — Part 3: Abstract service definition
ISO/IEC CD 9594-6
Information technology — Open Systems Interconnection — The Directory — Part 6: Selected attribute types
ISO/IEC CD 27034-4
Information technology — Security techniques — Application security — Part 4: Application security validation
ISO/IEC PDTR 23009-3
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 3: Implementation guidelines
DIS circulated
Period from 01 January to 31 January 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6 Paper, board and pulps
ISO/DIS 5631-1
* Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees) 2015-04-20
(Revision of ISO 5631-1:2009)
ISO/DIS 5631-2
* Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) 2015-04-20
(Revision of ISO 5631-2:2014)
ISO/DIS 5631-3
* Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees) 2015-04-20
(Revision of ISO 5631-3:2014)
ISO/DIS 11093-4
* Paper and board — Testing of cores — Part 4: Measurement of dimensions 2015-04-09
(Revision of ISO 11093-4:1997)
TC 8 Ships and marine technology
ISO/DIS 15364
* Ships and marine technology — Pressure/vacuum valves for cargo tanks 2015-04-30
(Revision of ISO 15364:2007)
TC 10 Technical product documentation
ISO/DIS 16016
* Technical product documentation — Protection notices for restricting the use of documents and products 2015-04-13
(Revision of ISO 16016:2000)
ISO/DIS 18388
* Technical product documentation (TPD) — Relief grooves — Types and dimensioning 2015-04-20
TC 17 Steel
ISO/DIS 4955 * Heat-resistant steels 2015-04-20
(Revision of ISO 4955:2005)
ISO/DIS 6931-1
* Stainless steels for springs — Part 1: Wire 2015-04-27
(Revision of ISO 6931-1:1994)
ISO/DIS 11949.2
* Cold-reduced tinmill products — Electrolytic tinplate 2015-03-29
(Revision of ISO 11949:1995)
ISO/DIS 11950.2
* Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel 2015-03-29
(Revision of ISO 11950:1995)
ISO/DIS 11951.2
* Cold-reduced tinmill products — Blackplate 2015-03-29
(Revision of ISO 11951:1995)
ISO/DIS 22034-2
* Steel wire and wire products — Part 2: Tolerances on wire dimensions 2015-04-27
(Revision of ISO 22034-2:2007)
TC 20 Aircraft and space vehicles
ISO/DIS 18238
* Space systems — Closed loop problem solving management 2015-04-13
ISO/DIS 18257
* Space systems — Semiconductor integrated circuits of space applications — Design requirements 2015-04-27
TC 22 Road vehicles
ISO/DIS 12156-1
* Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method 2015-04-23
(Revision of ISO 12156-1:2006)
ISO/DIS 15500-15
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 15: Gas-tight housing and ventilation hose 2015-04-09
(Revision of ISO 15500-15:2001)
ISO/DIS 10924-1
* Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements 2015-04-27
(Revision of ISO 10924-1:2009)
TC 23 Tractors and machinery for agriculture and forestry
ISO/DIS 18497
* Agricultural machinery and tractors — Safety of highly automated machinery 2015-04-30
ISO/DIS 5682-1
* Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer nozzles 2015-04-27
(Revision of ISO 5682-1:1996)
ISO/DIS 5682-2
* Equipment for crop protection — Spraying equipment — Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayer liquid delivery systems
2015-04-27
(Revision of ISO 5682-2:1997)
ISO/DIS 5682-3
* Equipment for crop protection — Spraying equipment — Part 3: Test method to assess the performance of volume/area adjustment systems for spray systems 2015-04-27
(Revision of ISO 5682-3:1996)
TC 29 Small tools
ISO/DIS 5611-1
* Cartridges, type A, for indexable inserts — Dimensions — Part 1: General survey; correlation of dimensions 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-2
* Cartridges, type A, for indexable inserts — Dimensions — Part 2: Style F 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-3
* Cartridges, type A, for indexable inserts — Dimensions — Part 3: Style G 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-4
* Cartridges type A for indexable inserts — Part 4: Style J 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-5
* Cartridges type A for indexable inserts — Part 5: Style K 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-6
* Cartridges type A for indexable inserts — Part 6: Style L 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-7
* Cartridges, type A, for indexable inserts — Dimensions — Part 7: Style R 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-8
* Cartridges, type A, for indexable inserts — Dimensions — Part 8: Style S 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-9
* Cartridges, type A, for indexable inserts — Dimensions — Part 9: Style T 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-10
* Cartridges type A for indexable inserts — Part 10: Style U 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-11
* Cartridges type A for indexable inserts — Part 11: Style W 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611-12
* Cartridges type A for indexable inserts — Part 12: Style Y 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 6789-1
* Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and method for design conformance testing and quality conformance testing — Minimum requirements for calibration and calibration certificates
2015-04-16
(Revision of ISO 6789:2003)
ISO/DIS 6789-2
* Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainly 2015-04-16
(Revision of ISO 6789:2003)
TC 30 Measurement of fluid flow in closed conduits
ISO/DIS 5167-5
* Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters 2015-04-30
TC 31 Tyres, rims and valves
ISO/DIS 10571
* Tyres for mobile cranes and similar specialized machines 2015-04-09
(Revision of ISO 10571:2011)
TC 37 Terminology and other language and content resources
ISO/DIS 24615-2
* Language resource management — Syntactic annotation framework (SynAF) — Part 2: XML serialization (ISOTiger) 2015-04-08
TC 39 Machine tools
ISO 230-2:2014/DAmd 1
* Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes — Amendment 1 2015-04-27
TC 42 Photography
ISO/DIS 19084
* Photography — Digital cameras — Chromatic displacement measurements 2015-04-27
ISO/DIS 19262
* Photography — Archiving Systems — Vocabulary 2015-04-27
TC 43 Acoustics
ISO/DIS 4869-1
* Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation 2015-04-16
(Revision of ISO 4869-1:1990)
ISO/DIS 17208-1
* Underwater acoustics — Quantities and procedures for description and precision measurement of underwater sound from ships — Part 1: Requirements for precision measurements in deep water used for comparison purposes
2015-04-13
(Revision of ISO/PAS 17208-1:2012)
ISO/DIS 18405
* Underwater acoustics — Terminology 2015-04-13
TC 44 Welding and allied processes
ISO/DIS 17777
* Welding consumables — Covered electrodes for manual metal arc welding of copper and copper alloys — Classification 2015-04-16
ISO/DIS 19288
* Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys — Classification 2015-04-23
TC 46 Information and documentation
ISO/DIS 11799
* Information and documentation — Document storage requirements for archive and library materials 2015-04-20
(Revision of ISO 11799:2003)
ISO/DIS 15489-1
* Information and documentation — Records management — Part 1: Concepts and principles 2015-04-24
(Revision of ISO 15489-1:2001)
TC 61 Plastics
ISO/DIS 1922.2
* Rigid cellular plastics — Determination of shear strength 2015-03-27
(Revision of ISO 1922:2012)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/DIS 19901-4
* Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations 2015-04-23
(Revision of ISO 19901-4:2003)
TC 72 Textile machinery and accessories
ISO/DIS 18599
* Textile machinery and accessories — Strips for water jet solidification 2015-04-09
ISO/DIS 18600
* Textile machinery and accessories — Web roller cards — Terms and definitions 2015-04-09
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/DIS 4802-1
* Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification 2015-04-13
(Revision of ISO 4802-1:2010)
ISO/DIS 4802-2
* Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification 2015-04-13
(Revision of ISO 4802-2:2010)
ISO/DIS 11418-1
* Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles 2015-04-13
(Revision of ISO 11418-1:2005)
ISO/DIS 11418-2
* Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups 2015-04-13
(Revision of ISO 11418-2:2005)
ISO/DIS 11418-3
* Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms 2015-04-13
(Revision of ISO 11418-3:2005)
ISO/DIS 11418-7
* Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms 2015-04-13
(Revision of ISO 11418-7:1998)
TC 83 Sports and other recreational facilities and equipment
ISO/DIS 25649-1
* Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods 2015-04-16
ISO/DIS 25649-2
* Floating leisure articles for use on and in the water — Part 2: Consumer information 2015-04-16
ISO/DIS 25649-3
* Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices 2015-04-16
ISO/DIS 25649-4
* Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices 2015-04-16
ISO/DIS 25649-5
* Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices 2015-04-16
ISO/DIS 25649-6
* Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices 2015-04-16
ISO/DIS 25649-7
* Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices 2015-04-16
ISO/DIS 9838 * Alpine and touring ski-bindings — Test soles for ski-binding tests 2015-04-09
(Revision of ISO 9838:2008)
TC 84 Devices for administration of medicinal products and catheters
ISO/DIS 9626 * Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods 2015-04-30
(Revision of ISO 9626:1991, ISO 9626:1991/Amd 1:2001)
TC 94 Personal safety -- Protective clothing and equipment
ISO/DIS 27065
* Protective clothing — Performance requirements for protective clothing worn by operators applying liquid pesticides and for re-entry workers 2015-04-16
(Revision of ISO 27065:2011)
ISO/DIS 16975-1.2
* Respiratory protective devices — Selection, use and maintenance — Part 1: Establishing and implementing a respiratory protective device programme 2015-03-22
TC 96 Cranes
ISO/DIS 4301-1
* Cranes and lifting appliances — Classification — Part 1: General 2015-04-27
ISO/DIS 4302 * Cranes — Wind load assessment 2015-04-27
(Revision of ISO 4302:1981)
ISO/DIS 11031.2
* Cranes — Principles for seismically resistant design 2015-03-16
TC 106 Dentistry
ISO/DIS 9173-1
* Dentistry — Extraction forceps — Part 1: General requirements 2015-06-16
(Revision of ISO 9173-1:2006)
ISO/DIS 18559
* Dentistry — Extraoral spatulas for mixing dental cements 2015-04-16
ISO/DIS 19429
* Dentistry — Designation system for dental implants 2015-04-20
TC 122 Packaging
ISO/DIS 21067-2
* Packaging — Vocabulary — Part 2: Packaging and the environment terms 2015-04-09
(Revision of ISO 21067:2007)
TC 131 Fluid power systems
ISO 1219-1:2012/DAmd 1
* Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications — Amendment 1
2015-04-27
TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
ISO/DIS 18831
* Clothing — Digital fittings — Attributes of virtual garments 2015-04-13
TC 136 Furniture
ISO/DIS 9221-1
* Furniture — Children's high chairs — Part 1: Safety requirements 2015-04-27
(Revision of ISO 9221-1:1992)
ISO/DIS 9221-2
* Furniture — Children's high chairs — Part 2: Test methods 2015-04-27
(Revision of ISO 9221-2:1992)
ISO/DIS 24496
* Office furniture — Office chairs — Methods for the determination of dimensions 2015-04-27
(Revision of ISO/TR 24496:2012)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 8639.2
* Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and prove of structural design of flexible joints 2015-03-16
(Revision of ISO 8639:2000)
TC 146 Air quality
ISO/DIS 18158
* Workplace air — Terminology 2015-04-21
ISO/DIS 28902-2
* Air quality — Environmental meteorology — Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar 2015-04-27
TC 149 Cycles
ISO/DIS 6699 * Cycles — Stem and handlebar bend — Assembly dimensions 2015-04-09
(Revision of ISO 6699:1990)
TC 150 Implants for surgery
ISO/DIS 13781
* Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing 2015-04-20
(Revision of ISO 13781:1997, ISO 15814:1999)
ISO/DIS 7206-12
* Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells 2015-04-13
ISO/DIS 7206-13
* Implants for surgery — Partial and total hip joint prostheses — Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
2015-04-27
ISO/DIS 11491
* Implants for surgery — Test method for impact resistance of ceramic femoral head for hip joint prostheses 2015-04-09
TC 159 Ergonomics
ISO/DIS 9241-940
* Ergonomics of human-computer interaction — Part 940: Evaluation of tactile and haptic interactions 2015-04-28
TC 163 Thermal performance and energy use in the built environment
ISO/DIS 52010-1
* Energy performance of buildings — Overarching Assessment Procedures. External environment conditions — Part 1: Calculation Procedures 2015-04-23
ISO/DIS 52017-1
* Energy performance of buildings — Calculation of the dynamic thermal balance in a building or building zone — Part 1: Generic calculation procedure 2015-04-30
(Revision of ISO 13791:2012)
TC 164 Mechanical testing of metals
ISO/DIS 12135
* Metallic materials — Unified method of test for the determination of quasistatic fracture toughness 2015-04-22
(Revision of ISO 12135:2002, ISO 12135:2002/Cor 1:2008)
TC 165 Timber structures
ISO/DIS 18324
* Timber structures — Test methods — Floor vibration performance 2015-04-27
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO/DIS 9599 * Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method 2015-04-27
(Revision of ISO 9599:1991)
TC 184 Automation systems and integration
ISO/DIS 18646-1
* Robots and robotic devices — Performance criteria and related test methods for service robot — Part 1: Locomotion for wheeled robots 2015-04-17
TC 188 Small craft
ISO 21487:2012/DAmd 2
* Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 2 2015-04-30
TC 201 Surface chemical analysis
ISO/DIS 19830
* Surface chemical analysis — Electron spectroscopies — Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy 2015-04-20
TC 206 Fine ceramics
ISO/DIS 18591
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of compressive strength of ceramic granules 2015-04-27
ISO/DIS 18608
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature — Evaluation of the resistance to crack propagation by notch sensitivity testing
2015-04-09
TC 213 Dimensional and geometrical product specifications and verification
ISO/DIS 1 * Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties 2015-04-30
(Revision of ISO 1:2002)
TC 220 Cryogenic vessels
ISO/DIS 21028-1
* Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C 2015-04-23
(Revision of ISO 21028-1:2004)
TC 247 Fraud countermeasures and controls
ISO/DIS 34001.3
Security management system — Fraud countermeasures and controls 2015-03-23
TC 249 Traditional chinese medicine
ISO/DIS 18665
* Traditional Chinese Medicine — Herbal decoction apparatus 2015-04-09
ISO/DIS 18666
* Traditional Chinese medicine — General requirements of moxibustion devices 2015-04-09
TC 263 Coalbed methane (CBM)
ISO/DIS 18871
* Method of determining coalbed methane content 2015-04-21
ISO/DIS 18875
* Coalbed methane exploration and development — Terms and definitions 2015-04-20
JTC 1 Information technology
ISO/IEC DIS 15149-3
* Information technology — Telecommunications and information exchange between systems — Magnetic field area network (MFAN) — Part 3: Relay Protocol for Extended Range
2015-04-17
(Revision of ISO/IEC 15149:2011)
ISO/IEC DIS 19770-2
* Information technology — Software asset management — Part 2: Software identification tag 2015-04-09
(Revision of ISO/IEC 19770-2:2009)
ISO/IEC DIS 25066
* Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Common industry Format for Usability — Evaluation Report
2015-04-09
ISO/IEC DIS 7816-8
* Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations 2015-04-27
(Revision of ISO/IEC 7816-8:2004)
ISO/IEC DIS 18584
* Information technology — Identification cards — Conformance test requirements for on-card biometric comparison applications 2015-04-13
ISO/IEC DIS 27006
* Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems 2015-04-21
(Revision of ISO/IEC 27006:2011)
ISO/IEC DIS 27013
* Information technology — Security techniques — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1 2015-04-27
(Revision of ISO/IEC 27013:2012)
ISO/IEC DIS 27017
* Information technology — Security techniques — Code of practice for information security controls based on ISO/IEC 27002 for cloud services 2015-04-21
ISO/IEC DIS 23001-12
* Information technology — MPEG systems technologies — Part 12: Sample Variants in the ISO Base Media File Format 2015-04-27
ISO/IEC 29199-5:2012/DAmd 1
* Information technology — JPEG XR image coding system — Part 5: Reference software — Amendment 1: Extension of the Reference Software: Support for the Boxed Based File Format
2015-04-16
ISO/IEC DIS 29167-19
* Information technology — Automatic identification and data capture techniques — Part 19: Air Interface for security services crypto suite RAMON 2015-04-27
ISO/IEC DIS 9075-1
* Information technology — Database languages — SQL — Part 1: Framework (SQL/Framework) 2015-04-20
(Revision of ISO/IEC 9075-1:2011)
ISO/IEC DIS 9075-2
* Information technology — Database languages — SQL — Part 2: Foundation (SQL/Foundation) 2015-04-20
(Revision of ISO/IEC 9075-2:2011)
ISO/IEC DIS 9075-3
* Information technology — Database languages — SQL — Part 3: Call-Level Interface (SQL/CLI) 2015-04-20
(Revision of ISO/IEC 9075-3:2008)
ISO/IEC DIS 9075-4
* Information technology — Database languages — SQL — Part 4: Persistent Stored Modules (SQL/PSM) 2015-04-20
(Revision of ISO/IEC 9075-4:2011)
ISO/IEC DIS 9075-9
* Information technology — Database languages — SQL — Part 9: Management of External Data (SQL/MED) 2015-04-20
(Revision of ISO/IEC 9075-9:2008, ISO/IEC 9075-9:2008/Cor 1:2010)
ISO/IEC DIS 9075-10
* Information technology — Database languages — SQL — Part 10: Object Language Bindings (SQL/OLB) 2015-04-20
(Revision of ISO/IEC 9075-10:2008, ISO/IEC 9075-10:2008/Cor 1:2010)
ISO/IEC DIS 9075-11
* Information technology — Database languages — SQL — Part 11: Information and Definition Schemas (SQL/Schemata) 2015-04-20
(Revision of ISO/IEC 9075-11:2011)
ISO/IEC DIS 9075-13
* Information technology — Database languages — SQL — Part 13: SQL Routines and Types Using the Java TM Programming Language (SQL/JRT) 2015-04-20
(Revision of ISO/IEC 9075-13:2008, ISO/IEC 9075-13:2008/Cor 1:2010)
ISO/IEC DIS 9075-14
* Information technology — Database languages — SQL — Part 14: XML-Related Specifications (SQL/XML) 2015-04-20
(Revision of ISO/IEC 9075-14:2011)
FDIS circulated
Period from 01 January to 31 January 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 4 Rolling bearings
ISO/FDIS 464 * Rolling bearings — Radial bearings with locating snap ring — Dimensions and geometrical tolerances (GPS) 2015-03-16
(Revision of ISO 464:1995)
TC 6 Paper, board and pulps
ISO/FDIS 1762
* Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C 2015-03-15
(Revision of ISO 1762:2001)
ISO/FDIS 2144
* Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C 2015-03-15
(Revision of ISO 2144:1997)
TC 8 Ships and marine technology
ISO/FDIS 29400
* Ships and marine technology — Offshore wind energy — Ports and marine operations 2015-03-27
TC 10 Technical product documentation
ISO/FDIS 128-43
* Technical product documentation (TPD) — General principles of presentation — Part 43: Projection methods in building drawings 2015-03-20
(Revision of ISO 2594:1972)
ISO/FDIS 14084-1
* Process diagrams for power plants — Part 1: Specification for diagrams 2015-03-20
TC 20 Aircraft and space vehicles
ISO/FDIS 8177
* Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions 2015-03-14
(Revision of ISO 8177:1986)
TC 23 Tractors and machinery for agriculture and forestry
ISO/FDIS 17962
* Agricultural machinery — Equipment for sowing — Minimization of the environmental effects of fan exhaust from pneumatic systems 2015-03-16
ISO/FDIS 11783-10
* Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data interchange
2015-03-15
(Revision of ISO 11783-10:2009, ISO 11783-10:2009/CD Amd 1)
TC 28 Petroleum products and related products of synthetic or biological origin
ISO/FDIS 6743-4
* Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems) 2015-03-16
(Revision of ISO 6743-4:1999)
TC 34 Food products
ISO/FDIS 27971
* Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology
2015-03-16
(Revision of ISO 27971:2008)
ISO/FDIS 16649-3
* Microbiology of the food chain — Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli — Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide
2015-03-16
(Revision of ISO/TS 16649-3:2005)
ISO/FDIS 12966-4
* Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: Determination by capillary gas chromatography 2015-03-16
(Revision of ISO 5508:1990, ISO 15304:2002)
TC 38 Textiles
ISO/FDIS 2061
* Textiles — Determination of twist in yarns — Direct counting method
2015-03-30
(Revision of ISO 2061:2010)
TC 43 Acoustics
ISO/FDIS 1683
* Acoustics — Preferred reference values for acoustical and vibratory levels 2015-03-30
(Revision of ISO 1683:2008)
ISO 10140-3:2010/FDAmd 1
* Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation — Amendment 1 2015-03-16
(Revision of ISO 10140-3:2010/DAmd 2, ISO 10140-3:2010/DAmd 3)
ISO/FDIS 16283-2
* Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation 2015-03-30
(Revision of ISO 140-7:1998, ISO 140-14:2004)
TC 44 Welding and allied processes
ISO/FDIS 3834-5
* Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
2015-03-16
(Revision of ISO 3834-5:2005, ISO 3834-5:2005/Cor 1:2007)
TC 45 Rubber and rubber products
ISO/FDIS 2028
Synthetic rubber latex — Preparation of dry polymer 2015-03-20
(Revision of ISO 2028:1999)
TC 58 Gas cylinders
ISO/FDIS 14456
* Gas cylinders — Gas properties and associated classification (FTSC) codes 2015-03-29
TC 61 Plastics
ISO/FDIS 13802
* Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing 2015-03-16
(Revision of ISO 13802:1999, ISO 13802:1999/Cor 1:2000)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/FDIS 16903
* Petroleum and natural gas industries — Characteristics of LNG, influencing the design, and material selection 2015-03-23
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/FDIS 3826-4
* Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features 2015-03-23
ISO/FDIS 8536-8
* Infusion equipment for medical use — Part 8: Infusion equipment for single use with pressure infusion apparatus 2015-03-16
(Revision of ISO 8536-8:2004)
ISO/FDIS 8536-9
* Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion equipment 2015-03-16
(Revision of ISO 8536-9:2004)
ISO/FDIS 8536-10
* Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment 2015-03-16
(Revision of ISO 8536-10:2004)
ISO/FDIS 8536-11
* Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infusion equipment 2015-03-16
(Revision of ISO 8536-11:2004)
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/FDIS 21613
* (U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine 2015-03-14
TC 94 Personal safety -- Protective clothing and equipment
ISO/FDIS 12312-2
* Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun 2015-03-16
TC 106 Dentistry
ISO/FDIS 6872
* Dentistry — Ceramic materials 2015-03-23
(Revision of ISO 6872:2008)
ISO/FDIS 16954
* Dentistry — Test methods for dental unit waterline biofilm treatment 2015-03-23
TC 115 Pumps
ISO/FDIS 20361
* Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy 2015-03-16
(Revision of ISO 20361:2007)
TC 117 Fans
ISO 5802:2001/FDAmd 1
* Industrial fans — Performance testing in situ — Amendment 1 2015-03-23
TC 121 Anaesthetic and respiratory equipment
ISO/FDIS 17510
* Medical devices — Sleep apnoea breathing therapy — Masks and application accessories 2015-03-30
(Revision of ISO 17510-2:2007)
TC 131 Fluid power systems
ISO/FDIS 3723
* Hydraulic fluid power — Filter elements — Method for end load test 2015-03-15
(Revision of ISO 3723:1976)
TC 134 Fertilizers and soil conditioners
ISO/FDIS 8157
* Fertilizers and soil conditioners — Vocabulary 2015-03-13
(Revision of ISO 8157:1984)
ISO/FDIS 17318
* Fertilizers and soil conditioners — Determination of arsenic, cadmium, chromium, lead and mercury contents 2015-03-07
ISO/FDIS 17319
* Fertilizers and soil conditioners — Determination of water-soluble potassium content — Potassium tetraphenylborate gravimetric method 2015-03-07
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 10931:2005/FDAmd 1
* Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Specifications for components and the system — Amendment 1 2015-03-16
TC 147 Water quality
ISO/FDIS 13168
* Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting 2015-03-27
TC 156 Corrosion of metals and alloys
ISO/FDIS 16701.2
* Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
2015-03-16
(Revision of ISO 16701:2003)
ISO/FDIS 17918
* Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for nuclear power plant components by visual inspection and hardness measurement
2015-03-15
TC 164 Mechanical testing of metals
ISO/FDIS 14577-1
* Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method 2015-03-16
(Revision of ISO 14577-1:2002)
ISO/FDIS 14577-2
* Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines 2015-03-16
(Revision of ISO 14577-2:2002)
ISO/FDIS 14577-3
* Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks 2015-03-16
(Revision of ISO 14577-3:2002)
TC 172 Optics and photonics
ISO/FDIS 10109
* Optics and photonics — Guidance for the selection of environmental tests 2015-03-20
(Revision of ISO 10109:2014)
ISO/FDIS 8036
* Optics and photonics — Microscopes — Immersion liquids for light microscopy 2015-03-20
(Revision of ISO 8036:2006)
TC 181 Safety of toys
ISO/FDIS 8124-5
* Safety of toys — Part 5: Determination of total concentration of certain elements in toys 2015-03-15
TC 182 Geotechnics
ISO/FDIS 17628
* Geotechnical investigation and testing — Geothermal testing — Determination of thermal conductivity of soil and rock using a borehole heat exchanger 2015-03-23
ISO/FDIS 18674-1
* Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 1: General rules 2015-03-30
TC 184 Automation systems and integration
ISO/FDIS 15746-1
* Automation systems and integration — Integration of advanced process control and optimization capabilities for manufacturing systems — Part 1: Framework and functional model
2015-03-20
TC 204 Intelligent transport systems
ISO 14906:2011/FDAmd 1
* Electronic fee collection — Application interface definition for dedicated short-range communication — Amendment 1 2015-03-23
TC 206 Fine ceramics
ISO/FDIS 18558
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings 2015-03-14
TC 211 Geographic information/Geomatics
ISO/FDIS 19135-1
* Geographic information — Procedures for item registration — Part 1: Fundamentals 2015-03-16
(Revision of ISO 19135:2005)
TC 215 Health informatics
ISO/HL7 FDIS 10781
* Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM) 2015-03-30
(Revision of ISO/HL7 10781:2009)
TC 220 Cryogenic vessels
ISO/FDIS 21029-2
* Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements 2015-03-23
(Revision of ISO 21029-2:2004)
TC 221 Geosynthetics
ISO/FDIS 10319
* Geosynthetics — Wide-width tensile test 2015-03-16
(Revision of ISO 10319:2008)
JTC 1 Information technology
ISO/IEC FDIS 19678
* Information Technology — BIOS Protection Guidelines 2015-03-13
ISO/IEC/IEEE FDIS 8802-3-1
* Information technology — Management Information Base (MIB) — Definitions for Ethernet — Part 3-1: 2015-06-20
ISO/IEC/IEEE FDIS 15289.2
* Systems and software engineering — Content of life-cycle information items (documentation) 2015-03-22
(Revision of ISO/IEC/IEEE 15289:2011)
ISO/IEC FDIS 16350
* Information technology — Systems and software engineering — Application management 2015-03-15
(Revision of ISO/IEC DIS 26500, ISO/IEC DIS 16350)
ISO/IEC FDIS 24760-2
* Information technology — Security techniques — A framework for identity management — Part 2: Reference architecture and requirements 2015-03-20
ISO/IEC 23002-5:2013/FDAmd 1
* Information technology — MPEG video technologies — Part 5: Reconfigurable media coding conformance and reference software — Amendment 1: Graphics tool library (GTL) reference software and conformance
2015-03-20
ISO/IEC 23009-1:2014/FDAmd 1
* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Amendment 1: High Profile and Availability Time Synchronization
2015-03-16
ISO/IEC FDIS 29167-10
* Information technology — Automatic identification and data capture techniques — Part 10: Crypto suite AES-128 security services for air interface communications 2015-03-14
ISO/IEC FDIS 29167-12
* Information technology — Automatic identification and data capture techniques — Part 12: Crypto suite ECC-DH security services for air interface communication 2015-03-14
ISO/IEC FDIS 29167-13
* Information technology — Automatic identification and data capture techniques — Part 13: Air Interface for security services — Cryptographic suite Grain-128A 2015-03-14
ISO/IEC FDIS 29167-17
* Information technology — Automatic identification and data capture techniques — Part 17: Air interface for security services crypto suite cryptoGPS 2015-03-14
Standards published
New International Standards published between 01 January and 31 January 2015
* Available in English only
** French version of standard previously published in English only
Price group
PC 251 Asset management
ISO 55000:2014
* Asset management — Overview, principles and terminology D
ISO 55001:2014
* Asset management — Management systems — Requirements C
ISO 55002:2014
* Asset management — Management systems — Guidelines for the application of ISO 55001 E
TC 2 Fasteners
ISO 4017:2014
Fasteners — Hexagon head screws — Product grades A and B B
TC 8 Ships and marine technology
ISO 14884:2015
* Large yachts — Weathertight doors — Strength and weathertightness requirements B
TC 10 Technical product documentation
ISO 17599:2015
* Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products D
TC 17 Steel
ISO 683-17:2014
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels D
ISO 4997:2015
* Cold-reduced carbon steel sheet of structural quality B
ISO 377:2013 * Steel and steel products — Location and preparation of samples and test pieces for mechanical testing D
TC 21 Equipment for fire protection and fire fighting
ISO 14520-13:2015
* Gaseous fire-extinguishing systems — Physical properties and system design — Part 13: IG-100 extinguishant A
TC 22 Road vehicles
ISO 14229-7:2015
* Road vehicles — Unified diagnostic services (UDS) — Part 7: UDS on local interconnect network (UDSonLIN) C
ISO 16844-4:2015
* Road vehicles — Tachograph systems — Part 4: CAN interface D
ISO 16844-6:2015
* Road vehicles — Tachograph systems — Part 6: Diagnostics C
ISO 16844- * Road vehicles — Tachograph systems — Part 7: Parameters
7:2015 G
ISO 18542-2:2014
Road vehicles — Standardized repair and maintenance information (RMI) terminology — Part 2: Standardized process implementation requirements, Registration Authority
E
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 17308:2015
* Petroleum products and other liquids — Ethanol — Determination of electrical conductivity A
TC 29 Small tools
ISO 9138:2015
* Abrasive grains — Sampling and splitting A
TC 33 Refractories
ISO 16349:2015
Refractory materials — Determination of abrasion resistance at elevated temperature B
TC 34 Food products
ISO 5527:2015
* Cereals — Vocabulary A
ISO 4833-1:2013
* Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 1: Colony count at 30 degrees C by the pour plate technique B
ISO 4833-2:2013
* Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 2: Colony count at 30 degrees C by the surface plating technique
B
ISO/TS 21569-3:2015
* Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 3: Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms
B
TC 37 Terminology and other language and content resources
ISO 24622-1:2015
* Language resource management — Component Metadata Infrastructure (CMDI) — Part 1: The Component Metadata Model B
TC 38 Textiles
ISO 17299-4:2015
* Textiles — Determination of deodorant property — Part 4: Condensation sampling analysis D
TC 39 Machine tools
ISO 10791-1:2015
Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis) H
ISO 23125:2015
Machine tools — Safety — Turning machines G
TC 43 Acoustics
ISO 362-1:2015
* Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories G
ISO/TR 17534-3:2015
* Acoustics — Software for the calculation of sound outdoors — Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
G
TC 44 Welding and allied processes
ISO/TR 14745:2015
* Welding — Post-weld heat treatment parameters for steels B
TC 54 Essential oils
ISO 3064:2015
Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.)) B
TC 58 Gas cylinders
ISO 11120:2015
Gas cylinders — Refillable seamless steel tubes of water capacity between 150 l and 3000 l — Design, construction and testing E
TC 60 Gears
ISO/TR 15144-2:2014
Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for micropitting F
TC 63 Glass containers
ISO 12818:2013
Glass packaging — Standard tolerances for flaconnage B
ISO 12821:2013
Glass packaging — 26 H 180 crown finish — Dimensions A
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TS 18683:2015
* Guidelines for systems and installations for supply of LNG as fuel to ships F
ISO 13354:2014
Petroleum and natural gas industries — Drilling and production equipment — Shallow gas diverter equipment F
TC 69 Applications of statistical methods
ISO 17258:2015
Statistical methods — Six Sigma — Basic criteria underlying benchmarking for Six Sigma in organisations F
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 10406-1:2015
* Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids F
ISO 10406-2:2015
* Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets E
TC 84 Devices for administration of medicinal products and catheters
ISO 10555-1:2013
* Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements D
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 17099:2014
Radiological protection — Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry
E
ISO 18589-2:2015
* Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples D
ISO 15366-1:2014
Nuclear fuel technology — Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography — Part 1: Samples containing plutonium in the microgram range and uranium in the milligram range
B
ISO 15366-2:2014
Nuclear fuel technology — Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography — Part 2: Samples containing plutonium and uranium in the nanogram range and below
B
TC 92 Fire safety
ISO 14934-4:2014
Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests D
ISO 5925-1:2007/Amd 1:2015
* Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests — Amendment 1 XZ
ISO 6944-1:2008/Amd 1:2015
* Fire containment — Elements of building construction — Part 1: Ventilation ducts — Amendment 1 XZ
TC 96 Cranes
ISO 12482:2014
Cranes — Monitoring for crane design working period C
TC 106 Dentistry
ISO/TS 11405:2015
* Dentistry — Testing of adhesion to tooth structure B
ISO 9687:2015
Dentistry — Graphical symbols for dental equipment E
TC 107 Metallic and other inorganic coatings
ISO 14919:2015
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions C
ISO 14920:2015
Thermal spraying — Spraying and fusing of self-fluxing alloys B
TC 110 Industrial trucks
ISO 22915-12:2015
Industrial trucks — Verification of stability — Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer B
TC 111 Round steel link chains, chain slings, components and accessories
ISO * Round steel short link chains for lifting purposes — Fine tolerance hoist chains for
16872:2015 hand operated chain hoists — Grade VH C
ISO 16877:2015
* Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade TH C
TC 121 Anaesthetic and respiratory equipment
IEC 60601-1-11:2015
* Medical electrical equipment — Part 1-11: General requirements for basic safety and essential performance — Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
H
ISO 80601-2-70:2015
Medical Electrical Equipment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment F
TC 130 Graphic technology
ISO 12647-5:2015
* Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 5: Screen printing B
TC 137 Footwear sizing designations and marking systems
ISO/TS 19407:2015
* Footwear — Sizing — Conversion of sizing systems B
ISO/TS 19408:2015
* Footwear — Sizing — Vocabulary and terminology D
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 11297-3:2013
* Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes C
TC 146 Air quality
ISO 25597:2013
* Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution G
ISO 16000-20:2014
Indoor air — Part 20: Detection and enumeration of moulds — Determination of total spore count C
TC 147 Water quality
ISO 13164-1:2013
* Water quality — Radon-222 — Part 1: General principles D
TC 149 Cycles
ISO 4210-5:2014
* Cycles — Safety requirements for bicycles — Part 5: Steering test methods C
TC 150 Implants for surgery
ISO 13779-6:2015
Implants for surgery — Hydroxyapatite — Part 6: Powders B
ISO 7199:2009
Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) B
TC 156 Corrosion of metals and alloys
ISO 7441:2015
Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests C
TC 163 Thermal performance and energy use in the built environment
ISO 16956:2015
* Thermal performance in the built environment — Determination of air flow rate in building applications by field measuring methods D
TC 168 Prosthetics and orthotics
ISO 13405-1:2015
Prosthetics and orthotics — Classification and description of prosthetic components — Part 1: Classification of prosthetic components A
ISO 13405-2:2015
Prosthetics and orthotics — Classification and description of prosthetic components — Part 2: Description of lower limb prosthetic components C
ISO 13405-3:2015
Prosthetics and orthotics — Classification and description of prosthetic components — Part 3: Description of upper limb prosthetic components C
ISO 29783-2:2015
Prosthetics and orthotics — Vocabulary — Part 2: Prosthetic gait A
TC 172 Optics and photonics
ISO 14490-5:2005/Amd 1:2015
* Optics and optical instruments — Test methods for telescopic systems — Part 5: Test methods for transmittance — Amendment 1 XZ
TC 174 Jewellery
ISO 11490:2015
* Jewellery — Determination of palladium in palladium jewellery alloys — Gravimetric determination with dimethylglyoxime A
ISO 13756:2015
* Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride A
ISO 15093:2015
* Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys — Difference method using ICP-OES B
TC 190 Soil quality
ISO 11268-3:2014
Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the determination of effects in field situations C
ISO 16198:2015
Soil quality — Plant-based test to assess the environmental bioavailability of trace elements to plants F
TC 193 Natural gas
ISO 20765-2:2015
Natural gas — Calculation of thermodynamic properties — Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application G
TC 204 Intelligent transport systems
ISO 17572-1:2015
* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 1: General requirements and conceptual model E
ISO 17572-2:2015
* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 2: Pre-coded location references (pre-coded profile) F
ISO 17572-3:2015
* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 3: Dynamic location references (dynamic profile) H
TC 211 Geographic information/Geomatics
ISO/TS 19130-2:2014
Geographic information — Imagery sensor models for geopositioning — Part 2: SAR, InSAR, lidar and sonar H
TC 213 Dimensional and geometrical product specifications and verification
ISO 14638:2015
Geometrical product specifications (GPS) — Matrix model C
TC 219 Floor coverings
ISO 9405:2015
* Textile floor coverings — Assessment of changes in appearance A
ISO 10361:2015
* Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester B
TC 228 Tourism and related services
ISO 13009:2015
* Tourism and related services — Requirements and recommendations for beach operation E
ISO 13687:2014
Tourism and related services — Yacht harbours — Minimum requirements B
TC 261 Additive manufacturing
ISO 17296-2:2015
* Additive manufacturing — General principles — Part 2: Overview of process categories and feedstock B
TMBG Technical Management Board - groups
IWA 14-1:2013
* Vehicle security barriers — Part 1: Performance requirement, vehicle impact test method and performance rating F
IWA 14-2:2013
* Vehicle security barriers — Part 2: Application G
IWA 16:2015 * International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport E
CASCO Committee on conformity assessment
ISO/IEC TR 17026:2015
* Conformity assessment — Example of a certification scheme for tangible products E
JTC 1 Information technology
ISO/IEC 10373-
* Identification cards — Test methods — Part 2: Cards with magnetic stripes E
2:2015
ISO/IEC 27040:2015
* Information technology — Security techniques — Storage security H
ISO/IEC 15444-1:2004/Amd 8:2015
* Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 8: Profiles for an interoperable master format IMF XZ
ISO/IEC 23001-8:2013/Cor 1:2015
* Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Technical Corrigendum 1 free
ISO/IEC 19395:2015
* Information technology — Sustainability for and by information technology — Smart data centre resource monitoring and control E
Standards confirmed
The following International Standards are confimred for a five year period:
TC 22 Road vehicles
ISO 1185:2003 (reconfirmed)
ISO 1724:2003 (reconfirmed)
ISO 3731:2003 (reconfirmed)
ISO 3732:2003 (reconfirmed)
ISO 4091:2003 (reconfirmed)
ISO 4141-3:2006 (reconfirmed)
ISO 7588-1:1998 (reconfirmed)
ISO 7588-2:1998 (reconfirmed)
ISO 7588-3:1998 (reconfirmed)
ISO 7638-1:2003 (reconfirmed)
ISO 7638-2:2003 (reconfirmed)
ISO 8092-2:2005 (reconfirmed)
ISO 8092-3:1996 (reconfirmed)
ISO 8092-4:1997 (reconfirmed)
ISO 11452-7:2003
(reconfirmed)
ISO 2534:1998 (reconfirmed)
ISO 10054:1998 (reconfirmed)
ISO 10521-1:2006
(reconfirmed)
ISO 10521-2:2006
(reconfirmed)
ISO 11614:1999 (reconfirmed)
ISO 13556:1998 (reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 3776-3:2009
TC 34 Food products
ISO 4149:2005 (reconfirmed)
ISO 6670:2002 (reconfirmed)
ISO 8460:1987 (reconfirmed)
TC 36 Cinematography
ISO 23:1993 (reconfirmed)
TC 38 Textiles
ISO 105-B05:1993
(reconfirmed)
ISO 105-B06:1998
(reconfirmed)
ISO 105-C10:2006
(reconfirmed)
ISO 105-G03:1993
(reconfirmed)
ISO 105-J03:2009
ISO 105-N01:1993
(reconfirmed)
ISO 105-N02:1993
(reconfirmed)
ISO 105-N03:1993
(reconfirmed)
ISO 105-N04:1993
(reconfirmed)
ISO 105-N05:1993
(reconfirmed)
ISO 105-P01:1993
(reconfirmed)
ISO 105-S01:1993
(reconfirmed)
ISO 105-S02:1993
(reconfirmed)
ISO 105-S03:1993
(reconfirmed)
ISO 105- (reconfirmed)
X01:1993
ISO 105-X02:1993
(reconfirmed)
ISO 105-X09:1993
(reconfirmed)
ISO 105-X10:1993
(reconfirmed)
ISO 105-Z01:1993
(reconfirmed)
ISO 105-Z02:1993
(reconfirmed)
ISO 105-Z06:1998
(reconfirmed)
ISO 105-Z11:1998
(reconfirmed)
TC 41 Pulleys and belts (including veebelts)
ISO 22:1991 (reconfirmed)
ISO 155:1998 (reconfirmed)
ISO 2790:2004 (reconfirmed)
ISO 5287:2003 (reconfirmed)
ISO 5289:1992 (reconfirmed)
ISO 8370-1:1993 (reconfirmed)
ISO 8370-2:1993 (reconfirmed)
TC 42 Photography
ISO 5-1:2009
ISO 5-2:2009
ISO 5-3:2009
ISO 5-4:2009
ISO 518:2006 (reconfirmed)
ISO 2240:2003 (reconfirmed)
ISO 2827:1988 (reconfirmed)
ISO 3028:1984 (reconfirmed)
ISO 3664:2009
ISO 3943:1993 (reconfirmed)
ISO 6728:1983 (reconfirmed)
ISO 6846:1992 (reconfirmed)
ISO 9848:2003 (reconfirmed)
ISO 10505:2009
ISO 12232:2006 (reconfirmed)
ISO 14524:2009
ISO 16067-1:2003
(reconfirmed)
ISO 18932:2009
ISO 20462-1:2005
(reconfirmed)
ISO 20462-2:2005
(reconfirmed)
TC 44 Welding and allied processes
ISO 4063:2009
ISO 15011-4:2006
(reconfirmed)
TC 58 Gas cylinders
ISO 10460:2005 (reconfirmed)
TC 59 Buildings and civil engineering works
ISO 1006:1983 (reconfirmed)
ISO 1803:1997 (reconfirmed)
TC 60 Gears
ISO 1122-1:1998 (reconfirmed)
TC 83 Sports and other recreational facilities and equipment
ISO 9119:1990 (reconfirmed)
TC 89 Wood-based panels
ISO 27769-1:2009
ISO 27769-2:2009
TC 93 Starch (including derivatives and by-products)
ISO 1666:1996 (reconfirmed)
ISO 1741:1980 (reconfirmed)
ISO 1742:1980 (reconfirmed)
ISO 3593:1981 (reconfirmed)
ISO 5377:1981 (reconfirmed)
ISO 11213:1995 (reconfirmed)
ISO 11214:1996 (reconfirmed)
ISO 11543:2000 (reconfirmed)
TC 105 Steel wire ropes
ISO 2232:1990 (reconfirmed)
ISO 2532:1974 (reconfirmed)
TC 108 Mechanical vibration, shock and condition monitoring
ISO 7919-2:2009
ISO 7919-4:2009
ISO 10816-2:2009
ISO 10816-4:2009
TC 113 Hydrometry
ISO 14686:2003 (reconfirmed)
ISO 21413:2005 (reconfirmed)
TC 127 Earth-moving machinery
ISO 14401-1:2009
ISO 14401-2:2009
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 6993-1:2006 (reconfirmed)
ISO 6993-2:2006 (reconfirmed)
ISO 6993-3:2006 (reconfirmed)
ISO 6993-4:2006 (reconfirmed)
ISO 14531-4:2006
(reconfirmed)
TC 148 Sewing machines
ISO 10821:2005 (reconfirmed)
TC 163 Thermal performance and energy use in the built environment
ISO 15927-4:2005
(reconfirmed)
ISO 15927-5:2004
(reconfirmed)
TC 171 Document management applications
ISO 3334:2006 (reconfirmed)
TC 184 Automation systems and integration
ISO 18435-1:2009
ISO 19439:2006 (reconfirmed)
TC 199 Safety of machinery
ISO 21469:2006 (reconfirmed)
TC 211 Geographic information/Geomatics
ISO 19111-2:2009
ISO 19144-1:2009
TC 226 Materials for the production of primary aluminium
ISO 802:1976 (reconfirmed)
ISO 903:1976 (reconfirmed)
ISO 1693:1976 (reconfirmed)
ISO 1694:1976 (reconfirmed)
ISO 2070:1997 (reconfirmed)
ISO 3391:1976 (reconfirmed)
ISO 3429:1976 (reconfirmed)
ISO 3430:1976 (reconfirmed)
ISO 3431:1976 (reconfirmed)
ISO 4280:1977 (reconfirmed)
ISO 17499:2006 (reconfirmed)
ISO 17500:2006 (reconfirmed)
JTC 1 Information technology
ISO/IEC 10373-1:2006
Standards withdrawn
Period from 01 January to 31 January 2015
TC 121 Anaesthetic and respiratory equipment
ISO 17510-1:2007
(replaced by ISO 80601-2-70:2015)
TC 213 Dimensional and geometrical product specifications and verification
ISO/TR 14638:1995
(replaced by ISO 14638:2015)
CASCO Committee on conformity assessment
ISO/IEC Guide 28:2004
(replaced by ISO/IEC TR 17026:2015)
ISO/IEC Guide 53:2005
(replaced by ISO/IEC TR 17026:2015)
Meeting calendar
(update at 01 January 2015)
Meetings called for the month of December are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
February 2015
2 Virtual (Unknown)
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
2-3 Paris (France) TC 44/SC 3 Welding and allied processes/Welding consumables
2-5 Beijing (China) TC 257 Evaluation of energy savings
3-13 London (United Kingdom)
TC 213 Dimensional and geometrical product specifications and verification
10-12
London (United Kingdom)
TC 8/SC 8 Ships and marine technology/Ship design
10-13
Geneva (Switzerland)
President's committee
President's committee
11 Geneva (Switzerland)
CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
11 St. Petersburg, Florida (USA)
TC 115 Pumps
12 Fairfax (USA) TC 58/SC 4 Gas cylinders/Operational requirements for gas cylinders
25 Virtual (Unknown)
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
March 2015
2-6 Troy (USA) TC 22/SC 37
Road vehicles/Electrically propelled vehicles
3 Virtual (Unknown)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
9 Caparica (Portugal)
TC 48 Laboratory equipment
9-12 Arlington (USA)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
9-13 Morioka (Japan)
PC 284 Management system for private security operations - Requirements with guidance
9-13 Paris (France) TC 108 Mechanical vibration, shock and condition monitoring
9-13 La Plaine St-Denis (France)
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments
9-13 London (United Kingdom)
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
9-13 Morioka (Japan)
TC 292 Security
11 Paris (France) TC 108/SC 6
Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
11-12
Delft (Netherlands)
TC 67/SC 7 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
12 West Conshohocken (Philadelphia) (USA)
TC 221 Geosynthetics
16 Geneva (Switzerland)
President's committee
President's committee
16-18
Geneva (Switzerland)
COUNCIL Council
16-20
Salvador (Brazil)
PC 287 Chain of custody of wood and wood-based products
23-24
Chengdu (China)
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
23-27
Vienna (Austria)
JTC 1/SC 38 Information technology/Cloud Computing and Distributed Platforms
23-27
Paris (France) PC 278 Anti-bribery management systems
23-27
Tokyo (Japan) TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
25-26
Nara (Japan) TC 184 Automation systems and integration
26 Berlin (Germany)
TC 145/SC 2
Graphical symbols/Safety identification, signs, shapes, symbols and colours
April 2015
10 London (United Kingdom)
TC 92/SC 1 Fire safety/Fire initiation and growth
13 Paris (France) TC 29/SC 2 Small tools/Holding tools, adaptative items and interfaces
13-14
Lyon (France) TC 117 Fans
13-17
Prague (Czech Republic)
TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
14 Paris (France) TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items
15-17
St. Petersburg (Russian Federation)
TC 172/SC 4
Optics and photonics/Telescopic systems
16 Courbevoie, Paris (France)
TC 29/SC 8 Small tools/Tools for pressing and moulding
16 Tienjin (China) TC 161 Control and protective devices for gas and/or oil burners and appliances
17 Paris (France) TC 29 Small tools
19-24
Vico Equense (Italy)
TC 184/SC 4
Automation systems and integration/Industrial data
19-24
Hangzhou (China)
* TC 204 Intelligent transport systems
20-22
Zurich (Switzerland)
TC 126 Tobacco and tobacco products
20-22
Zurich (Switzerland)
TC 126/SC 1
Tobacco and tobacco products/Physical and dimensional tests
20-22
Zurich (Switzerland)
* TC 126/SC 2
Tobacco and tobacco products/Leaf tobacco
20-24
St. Augustin (Germany)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
20-24
San Francisco (USA)
TC 215 Health informatics
21 Beijing (China) TC 274 Light and lighting
21-22
Düsseldorf (Germany)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
21-22
Astana (Kazakhstan)
TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
21-23
San José, California (USA)
TC 171/SC 1
Document management applications/Quality
22-23
Milan (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts
23 Luxemburg (Luxembourg)
TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims
23 Düsseldorf (Germany)
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes personnel
23-24
Buenos Aires (Argentina)
TC 34/SC 12
Food products/Sensory analysis
24 Atlanta (USA) TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board
24 Luxemburg (Luxembourg)
TC 31 Tyres, rims and valves
24-27
Washington, D.C (USA)
PC 272 Forensic sciences
25 Atlanta (USA) TC 6 Paper, board and pulps
30 London (United Kingdom)
TC 30/SC 2 Measurement of fluid flow in closed conduits/Pressure differential devices
30 London (United Kingdom)
TC 30/SC 5 Measurement of fluid flow in closed conduits/Velocity and mass methods
(USA) **
TC 34/SC 15
Food products/Coffee
April-May 2015
15-16
London (United Kingdom)
TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
27-1 London (United Kingdom)
TC 30 Measurement of fluid flow in closed conduits
May 2015
4-7 Toronto TC 68 Financial services
(Canada)
4-7 Buxton (United Kingdom)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
4-8 Kuching (Malaysia)
* JTC 1/SC 27 Information technology/IT Security techniques
4-8 (Unknown) **
TC 36 Cinematography
8-15 Tokyo (Japan) * TC 10 Technical product documentation
11-12
Ottawa (Canada)
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
11-13
Turin (Italy) * TC 22/SC 35
Road vehicles/Lighting and visibility
11-15
Ohio (USA) TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications
11-16
Bologna (Italy) TC 130 Graphic technology
12-15
Beijing (China) TC 156 Corrosion of metals and alloys
12-15
Shanghai (China)
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
13 Paris (France) **
TC 87 Cork
18 London (United Kingdom)
* TC 4/SC 7 Rolling bearings/Spherical plain bearings
18-22
Glasgow, Scotland (United Kingdom)
JTC 1/SC 32 Information technology/Data management and interchange
18-22
Sao Paulo (Brazil)
JTC 1/SC 40 Information technology/IT Service Management and IT Governance
18-22
Chengdu (China)
* TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
18-22
Luzern (Switzerland)
* TC 114 Horology
19 London (United Kingdom)
* TC 4/SC 8 Rolling bearings/Load ratings and life
19 Naples (Italy) TC 29/SC 5 Small tools/Grinding wheels and abrasives
19 Turin (Italy) * TC 89/SC 3 Wood-based panels/Plywood
20 London (United Kingdom)
TC 4/SC 11 Rolling bearings/Linear motion rolling bearings
20 Turin (Italy) TC 89 Wood-based panels
20 Turin (Italy) * TC 89/SC 1 Wood-based panels/Fibre boards
20 Turin (Italy) * TC 89/SC 2 Wood-based panels/Particle boards
21 London (United Kingdom)
TC 4/SC 4 Rolling bearings/Tolerances, tolerance definitions and symbols (including GPS)
21 London (United Kingdom)
* TC 4/SC 5 Rolling bearings/Needle, cylindrical and spherical roller bearings
21 London (United Kingdom)
* TC 4/SC 12 Rolling bearings/Ball bearings
21-22
Copenhagen (Denmark)
* TC 173 Assistive products for persons with disability
21-22
Yangzhou (China)
TC 293 Feed machinery
22 London (United Kingdom)
TC 4 Rolling bearings
22 Los Angeles (USA)
TC 119 Powder metallurgy
22 Cape Town (South Africa)
TC 228 Tourism and related services
24-29
Tokyo (Japan) TC 113 Hydrometry
25 Tokyo (Japan) TC 113/SC 1
Hydrometry/Velocity area methods
25-29
Madrid (Spain) **
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
26 Tokyo (Japan) * TC 113/SC 6
Hydrometry/Sediment transport
26-27
Greenville (USA)
TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
26-28
Panama (Panama)
* TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection
26-29
Buenos Aires (Argentina)
TC 85/SC 5 Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
27 London (United Kingdom)
**
TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
27 Tokyo (Japan) TC 113/SC 8
Hydrometry/Ground water
28 Tokyo (Japan) TC 113/SC 2
Hydrometry/Flow measurement structures
28 Tokyo (Japan) TC 113/SC 5
Hydrometry/Instruments, equipment and data management
8-15 Tokyo (Japan) * TC 10/SC 1 Technical product documentation/Basic conventions
8-15 Tokyo (Japan) * TC 10/SC 6 Technical product documentation/Mechanical engineering documentation
8-15 Tokyo (Japan) * TC 10/SC 10
Technical product documentation/Process plant documentation
London (United Kingdom)
**
TC 131/SC 6
Fluid power systems/Contamination control
Vancouver (Canada)
**
TC 282/SC 1
Water re-use/Treated wastewater re-use for Irrigation
Vancouver (Canada)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
June 2015
1-4 Beijing (China) TC 249 Traditional chinese medicine
1-5 Arlington (USA)
* TC 20/SC 14
Aircraft and space vehicles/Space systems and operations
1-5 Sapporo (Japan)
**
TC 42 Photography
1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwater acoustics
1-5 Beijing (China) * TC 46/SC 11
Information and documentation/Archives/records management
1-6 Philadelphia (USA)
**
TC 147 Water quality
2-4 Shizuoka City (Japan)
* TC 34/SC 8 Food products/Tea
2-9 Matsue (Japan) JTC 1/SC 28 Information technology/Office equipment
3-5 (Japan) **
TC 145 Graphical symbols
5 (France) **
TC 22/SC 36
Road vehicles/Safety aspects and impact testing
5-6 San Antonio (USA)
**
TC 85/SC 6 Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
8-12 Houston (USA) * TC 35 Paints and varnishes
8-12 Berlin (Germany)
**
TC 121 Anaesthetic and respiratory equipment
8-12 Grasmere (United Kingdom)
* TC 268 Sustainable development in communities
9-10 New York (USA)
* TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
9-12 Pretoria (South Africa)
**
REMCO Committee on reference materials
9-12 London (United Kingdom)
* TC 289 Brand evaluation
10-11
(France) **
TC 17/SC 9 Steel/Tinplate and blackplate
11-12
Paris (France) TC 24/SC 4 Particle characterization including sieving/Particle characterization
11-12
Southampton (United Kingdom)
**
TC 211 Geographic information/Geomatics
15-16
Düsseldorf (Germany)
TC 17/SC 11
Steel/Steel castings
15-16
Kyoto (Japan) TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
15-19
London (United Kingdom)
* PC 277 Sustainable procurement
15-19
Vancouver (Canada)
**
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
15-19
Vancouver (Canada)
* TC 22/SC 39
Road vehicles/Ergonomics
15-19
Munich (Germany)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
16-17
Zurich (Switzerland)
* TC 17/SC 17
Steel/Steel wire rod and wire products
17-19
Berlin (Germany)
* TC 172/SC 9
Optics and photonics/Electro-optical systems
18-19
Stuttgart (Germany)
* TC 184/SC 2
Automation systems and integration/Robots and robotic devices
18-19
Geneva (Switzerland)
* TMB Technical Management Board
21-26
Matsue (Japan) **
TC 37 Terminology and other language and content resources
22-23
Dallas (USA) * TC 20/SC 17
Aircraft and space vehicles/Airport infrastructure
22-25
Avignon (France)
* TC 54 Essential oils
22-25
(Sweden) **
TC 149 Cycles
22-26
Sydney (Australia)
* JTC 1/SC 36 Information technology/Information technology for learning, education and training
22-26
(Netherlands) **
TC 34/SC 9 Food products/Microbiology
22-26
(China) **
TC 69 Applications of statistical methods
22-26
La Plaine St-Denis (France)
TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection
22-26
Göteborg (Sweden)
* TC 188 Small craft
24-26
St. Petersburg (Russian Federation)
* TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
25 Göteborg (Sweden)
* TC 188/SC 2
Small craft/Engines and propulsion systems
30 Virtual (Unknown)
* President's committee
President's committee
Montreal (Canada)
**
JTC 1/SC 31 Information technology/Automatic identification and data capture techniques
(Europe) **
TC 34/SC 18
Food products/Cocoa
Beijing (China) **
TC 46 Information and documentation
(China) **
TC 155 Nickel and nickel alloys
Mexico City (Mexico)
**
TC 242 Energy Management
(Unknown) **
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
June-July 2015
30-3 Milan (Italy) * TC 193 Natural gas
30-3 Milan (Italy) * TC 193/SC 1
Natural gas/Analysis of natural gas
30-3 Milan (Italy) * TC 193/SC 3
Natural gas/Upstream area
2nd Quarter 2015
(Europe) **
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Istanbul (Turkey)
**
TC 120 Leather
July 2015
1-7 Berlin (Germany)
* TC 91 Surface active agents
6-10 Helsinki (Finland)
* TC 44 Welding and allied processes
(USA) **
TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
August 2015
24-28
Toronto (Canada)
* TC 258 Project, programme and portfolio management
26-28
Jeju (Korea, Republic of)
* TC 206 Fine ceramics
August-September 2015
31-4 Hokaido (Japan)
* JTC 1/SC 35 Information technology/User interfaces
September 2015
4-12 New Delhi (India)
**
TC 207 Environmental management
7 Teddington (United Kingdom)
* TC 164/SC 2
Mechanical testing of metals/Ductility testing
7-11 Paris (France) * TC 153 Valves
7-14 Sydney (Australia)
**
TC 96 Cranes
8-10 Teddington (United Kingdom)
* TC 164/SC 5
Mechanical testing of metals/Fatigue testing
9 Teddington (United Kingdom)
* TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
9 Teddington (United Kingdom)
* TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
10 Teddington (United Kingdom)
* TC 164/SC 3
Mechanical testing of metals/Hardness testing
11 Teddington (United Kingdom)
* TC 164 Mechanical testing of metals
13 Seoul (Korea, Republic of)
* President's committee
President's committee
13-17
Lahaina, Hawaii (USA)
**
TC 127 Earth-moving machinery
14 Seoul (Korea, Republic of)
* COUNCIL Council
14-15
Hawaii (USA) * JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces
14-18
Milan (Italy) * TC 43 Acoustics
14-18
Berlin (Germany)
**
TC 150 Implants for surgery
14-18
(Canada) **
TC 205 Building environment design
14-25
Berlin (Germany)
* TC 213 Dimensional and geometrical product specifications and verification
15 Seoul (Korea, Republic of)
* DEVCO Committee on developing country matters
15 Vienna (Austria)
* TC 33 Refractories
15 Seoul (Korea, Republic of)
* TMB Technical Management Board
15-17
Pittsburgh (USA)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
16-18
Seoul (Korea, Republic of)
* GA General Assembly
17 Seoul (Korea, Republic of)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
17-18
(Canada) **
TC 163 Thermal performance and energy use in the built environment
21-24
Delft (Netherlands)
**
TC 146/SC 1
Air quality/Stationary source emissions
21-25
Poznan (Poland)
**
TC 23/SC 6 Tractors and machinery for agriculture and forestry/Equipment for crop protection
21-25
Delft (Netherlands)
**
TC 146/SC 6
Air quality/Indoor air
28-29
Basel (Switzerland)
**
TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes
(Europe) **
TC 22/SC 19
Road vehicles/Wheels
14-18
Milan (Italy) * TC 43/SC 1 Acoustics/Noise
14-18
Milan (Italy) TC 43/SC 2 Acoustics/Building acoustics
(Europe) **
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
(Japan) **
TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
Berlin (Germany)
**
TC 146/SC 2
Air quality/Workplace atmospheres
Johor Bahru (Malaysia)
**
TC 165 Timber structures
Seattle (USA) * TC 201/SC Surface chemical analysis/Secondary ion mass spectrometry
* 6
(China) **
TC 290 Online reputation
September-October 2015
27-3 Bangkok (Thailand)
* TC 106 Dentistry
28-2 Edmonton (Canada)
* TC 229 Nanotechnologies
October 2015
1 Rome (Italy) * TC 39/SC 4 Machine tools/Woodworking machines
5 (USA) **
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment
5-9 Dublin (Ireland)
* JTC 1/SC 38 Information technology/Cloud Computing and Distributed Platforms
5-9 Madrid (Spain) * TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in building construction
5-9 Madrid (Spain) * TC 59/SC 15
Buildings and civil engineering works/Performance description of houses
5-9 Madrid (Spain) * TC 59/SC 16
Buildings and civil engineering works/Accessibility and usability of the built environment
5-9 Vienna (Austria)
* TC 190 Soil quality
5-9 Vienna (Austria)
* TC 190/SC 2
Soil quality/Sampling
5-9 Vienna (Austria)
* TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
5-9 Vienna (Austria)
* TC 190/SC 4
Soil quality/Biological methods
5-9 Vienna (Austria)
* TC 190/SC 7
Soil quality/Soil and site assessment
8 Virtual (Unknown)
* President's committee
President's committee
8-9 Sao Paulo (Brazil)
* TC 58/SC 2 Gas cylinders/Cylinder fittings
9 Copenhagen (Denmark)
* TC 254 Safety of amusement rides and amusement devices
12-16
Paris (France) * TC 34/SC 17
Food products/Management systems for food safety
12-16
Turin (Italy) **
TC 70 Internal combustion engines
12-16
Beijing (China) * TC 181 Safety of toys
12-17
Beijing (China) * TC 20 Aircraft and space vehicles
12-17
Beijing (China) * TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems
12-17
Beijing (China) * TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology
15-17
Seattle (USA) * TC 201 Surface chemical analysis
18-23
Vichy (France) * TC 45 Rubber and rubber products
18-23
Vichy (France) * TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
18-23
Baltimore (USA)
* TC 184/SC 4
Automation systems and integration/Industrial data
19-21
Jeju (Korea, Republic of)
* TC 281 Fine Bubble Technology
19-23
(Germany) **
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
19-23
Gaithersburg (USA)
* TC 92 Fire safety
19-23
Gaithersburg (USA)
* TC 92/SC 1 Fire safety/Fire initiation and growth
19-23
Brussels (Belgium)
TC 154 Processes, data elements and documents in commerce, industry and administration
20-23
Oslo (Norway) **
TC 58/SC 3 Gas cylinders/Cylinder design
20-23
Beijing (China) * TC 269 Railway applications
21-24
Santiago (Chile)
* TC 195 Building construction machinery and equipment
22-23
London (United Kingdom)
* TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
22-23
Berlin (Germany)
* TC 209 Cleanrooms and associated controlled environments
26-29
Pretoria (South Africa)
**
TC 264 Fireworks
26-30
New Delhi (India)
* JTC 1/SC 27 Information technology/IT Security techniques
26-30
Porto Alegre (Brazil)
* TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
26-31
(China) **
JTC 1 Information technology
27-29
Berlin (Germany)
* TC 256 Pigments, dyestuffs and extenders
28-30
Tsukuba (Japan)
**
TC 202 Microbeam analysis
29 Seoul (Korea, Republic of)
* TC 71 Concrete, reinforced concrete and pre-stressed concrete
29-30
Tampa, Florida (USA)
* TC 17/SC 12
Steel/Continuous mill flat rolled products
(Unknown) **
TC 2 Fasteners
Madrid (Spain) **
TC 10/SC 8 Technical product documentation/Construction documentation
(Netherlands) * TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals
*
(Netherlands) **
TC 34/SC 11
Food products/Animal and vegetable fats and oils
Nairobi (Kenya)
**
TC 38 Textiles
Nairobi (Kenya)
**
TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
Nairobi (Kenya)
**
TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
Nairobi (Kenya)
**
TC 38/SC 23
Textiles/Fibres and yarns
Nairobi (Kenya)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
Washington, D.C (USA)
**
TC 79 Light metals and their alloys
Rio de Janeiro (Brazil)
**
TC 130 Graphic technology
Sao Paulo (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Turkey) **
TC 180 Solar energy
(Germany) **
TC 244 Industrial furnaces and associated processing equipment
(China) **
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
November 2015
2-6 Winterthur (Switzerland)
TC 215 Health informatics
2-6 Beijing (China) * TC 282 Water re-use
3 Berlin (Germany)
* TC 83 Sports and other recreational facilities and equipment
3-5 Montreal (Canada)
TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment
9-12 (Spain) **
TC 189 Ceramic tile
9-13 Kobe (Japan) * TC 21 Equipment for fire protection and fire fighting
9-13 Tokyo (Japan) TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
11 Nottingham (United Kingdom)
* TC 60 Gears
11-13
(Malaysia) **
TC 123 Plain bearings
12-13
Kuala Lumpur (Malaysia)
**
TC 227 Springs
16 (USA) **
PC 252 Natural gas fuelling stations for vehicles
20- Hong Kong * TC 176 Quality management and quality assurance
28 (Hong Kong, China)
Pretoria (South Africa)
**
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
December 2015
10 Berlin (Germany)
* TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
(United Arab Emirates)
**
TC 217 Cosmetics
4th Quarter 2015
(Sweden) **
TC 17/SC 1 Steel/Methods of determination of chemical composition
Madrid (Spain) **
TC 98 Bases for design of structures
Dayton, Ohio (USA)
**
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
Tel Aviv (Israel)
**
TC 282 Water re-use
2nd Semester 2015
(USA) **
TC 171 Document management applications
(France) **
TC 172/SC 1
Optics and photonics/Fundamental standards
Month unknown 2015
Brussels (Belgium)
**
TC 23 Tractors and machinery for agriculture and forestry
(USA) **
TC 27 Solid mineral fuels
(USA) **
TC 41 Pulleys and belts (including veebelts)
Berlin (Germany)
**
TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Japan) **
TC 142 Cleaning equipment for air and other gases
(USA) **
TC 197 Hydrogen technologies
January 2016
(China) **
TC 120 Leather
February 2016
26 Nairobi (Kenya)
* TMB Technical Management Board
(USA) **
TC 213 Dimensional and geometrical product specifications and verification
March 2016
14-18
Sydney (Australia)
**
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures
14-18
Sydney (Australia)
**
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machine systems
17-18
Geneva (Switzerland)
* COUNCIL Council
April 2016
11-15
Sydney (Australia)
**
TC 178 Lifts, escalators and moving walks
Seoul (Korea, Republic of)
**
TC 161 Control and protective devices for gas and/or oil burners and appliances
May 2016
(Brazil) **
TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
(India) **
TC 85 Nuclear energy, nuclear technologies, and radiological protection
(Korea, Republic of)
**
TC 122 Packaging
Stockholm (Sweden)
**
TC 130 Graphic technology
(USA) **
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
June 2016
15-16
Geneva (Switzerland)
* TMB Technical Management Board
(Germany) **
JTC 1/SC 36 Information technology/Information technology for learning, education and training
(Europe) **
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
2nd Quarter 2016
(Germany) **
TC 34/SC 4 Food products/Cereals and pulses
1st Semester 2016
New Delhi (India)
**
TC 34/SC 7 Food products/Spices, culinary herbs and condiments
(China) **
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
September 2016
19 Beijing (China) * COUNCIL Council
20 Beijing (China) * TMB Technical Management Board
21-23
Beijing (China) * GA General Assembly
Vienna (Austria)
**
JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces
Paris (France) **
TC 17 Steel
Sao Paulo (Brazil)
**
TC 209 Cleanrooms and associated controlled environments
Shanghai (China)
**
TC 213 Dimensional and geometrical product specifications and verification
Beijing (China) **
TC 256 Pigments, dyestuffs and extenders
3rd Quarter 2016
(USA) **
TC 289 Brand evaluation
October 2016
20-21
London (United Kingdom)
* TC 58 Gas cylinders
(Brazil) **
TC 59 Buildings and civil engineering works
(Korea, Republic of)
**
TC 201 Surface chemical analysis
(Israel) **
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
November 2016
(Norway) **
JTC 1 Information technology
4th Quarter 2016
Delft (Netherlands)
**
TC 28 Petroleum products and related products of synthetic or biological origin
Delft (Netherlands)
**
TC 28/SC 5 Petroleum products and related products of synthetic or biological origin/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
**
TC 28/SC 7 Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
Month unknown 2016
(Korea, Republic of)
**
JTC 1/SC 23 Information technology/Digitally Recorded Media for Information Interchange and Storage
(Russian Federation)
**
REMCO Committee on reference materials
(Denmark) **
TC 37 Terminology and other language and content resources
(South Africa) **
TC 44 Welding and allied processes
(Malaysia) **
TC 45 Rubber and rubber products
Wellington (New Zealand)
**
TC 46 Information and documentation
Wellington (New Zealand)
**
TC 46/SC 11
Information and documentation/Archives/records management
(Sweden) **
TC 102 Iron ore and direct reduced iron
(Japan) **
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
(Japan) **
TC 183 Copper, lead, zinc and nickel ores and concentrates
June 2017
(Australia) **
JTC 1/SC 36 Information technology/Information technology for learning, education and training
September 2017
London (United Kingdom)
**
JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces
New Delhi (India)
**
TC 178 Lifts, escalators and moving walks
3rd Quarter 2017
Vienna (Austria)
**
TC 289 Brand evaluation
June 2018
(Korea, Republic of)
**
JTC 1/SC 36 Information technology/Information technology for learning, education and training