victorian purchasing guide for msm manufacturing … · victorian purchasing guide for msm...

Victorian Purchasing Guide

for

MSM Manufacturing Training Package

Release 2.0

July 2016

MSM Manufacturing TP Release 2 of 29

© State of Victoria (Department of Education and Training) 2016.

Copyright of this material is reserved to the Crown in the right of the State of Victoria. This work is licensed under a Creative Commons Attribution-NoDerivs 3.0 Australia licence (http://creativecommons.org/licenses/by-nd/3.0/au/). You are free use, copy and distribute to anyone in its original form as long as you attribute Skills Victoria, Department of Education and Training as the author, and you license any derivative work you make available under the same licence.

Disclaimer

In compiling the information contained in and accessed through this resource, the Department of Education and Training (DET) has used its best endeavours to ensure that the information is correct and current at the time of publication but takes no responsibility for any error, omission or defect therein.

To the extent permitted by law DET, its employees, agents and consultants exclude all liability for any loss or damage (including indirect, special or consequential loss or damage) arising from the use of, or reliance on the information contained herein, whether caused or not by any negligent act or omission. If any law prohibits the exclusion of such liability, DET limits its liability to the extent permitted by law, for the resupply of the information.

Third party sites

This resource may contain links to third party websites and resources. DET is not responsible for the condition or content of these sites or resources as they are not under its control.

Third party material linked from this resource is subject to the copyright conditions of the third party. Users will need to consult the copyright notice of the third party sites for conditions of usage.

http://creativecommons.org/licenses/by-nd/3.0/au/


Victorian Purchasing Guide Version History

Training Package Version

Date VPG Approved

Comments

MSM Manufacturing Training Package Release No 2

7 July 2016

Release 2 of the MSM Manufacturing Training Package consolidates the remaining qualifications from the MSA07 Training Package. It includes the following components:

- Eight Process Manufacturing, Manufacturing Technology and Surface Preparation qualifications,

- Note that Certificates III, IV, Diploma and Advanced Diploma of Manufacturing Technology have not carried forward and will be included in the MEM Training Package.

Please refer to the Implementation Guide for further details: https://vetnet.education.gov.au/Pages/default.aspx

MSM Manufacturing Training Package Release No 1

22 March 2016

Release 1 of the MSM Manufacturing Training Package includes the following components:

- recreational vehicle qualifications and units of competency - water jetting and vacuum draining units of competency - high risk licensing units for boiler operations

For Process Manufacturing, Manufacturing Technology and Surface Preparation qualifications, refer to MSA07 Victorian Purchasing Guide: http://www.education.vic.gov.au/training/providers/rto/Pages/ purchasingguides.aspx#link46

https://vetnet.education.gov.au/Pages/default.aspx


MSM Manufacturing Training Package Victorian Purchasing Guide

CONTENTS

INTRODUCTION 5

What is a Victorian Purchasing Guide? 5

Registration 5

QUALIFICATIONS 6

UNITS OF COMPETENCY AND NOMINAL HOURS 7

SAMPLE TRAINING PROGRAMS 11

CONTACTS AND LINKS 27

GLOSSARY 29


INTRODUCTION

What is a Victorian Purchasing Guide? The Victorian Purchasing Guide provides information for use by Registered Training Organisations (RTOs) in the provision of Victorian government subsidised training. Specifically the Victorian Purchasing Guide provides the following information related to the delivery of nationally endorsed Training Packages in Victoria:

The maximum and minimum payable hours available for each qualification.

Nominal hours for each unit of competency within the Training Package. Registration RTOs must be registered by either the Victorian Registration and Qualifications Authority (VRQA) or the Australian Skills Qualification Authority (ASQA) regulatory body to be eligible to issue qualifications and statements of attainment under the Australian Qualifications Framework (AQF). The VRQA is the regulatory authority for Victoria responsible for the registration of education and training providers in VET who provide courses to domestic students only and who only offer training in Victoria only or Victoria and Western Australia only. To register to provide training to international students and in other Australian states and territories you will need to apply with ASQA.


QUALIFICATIONS

Code Title Minimum Payable Hours

Maximum Payable Hours

MSM10116 Certificate I in Process Manufacturing 171 180

MSM10216 Certificate I in Manufacturing (Pathways) 270 284

MSM20116 Certificate II in Process Manufacturing 428 450

MSM20216 Certificate II in Manufacturing Technology 342 360

MSM21015 Certificate II in Recreational Vehicle Service and Repair 255 269

MSM21115 Certificate II in Recreational Vehicle Manufacturing 361 380

MSM30116 Certificate III in Process Manufacturing 760 800

MSM30216 Certificate III in Surface Preparation and Coating Application 931 980

MSM31015 Certificate III in Recreational Vehicle Service and Repair 502 533

MSM31115 Certificate III in Recreational Vehicle Manufacturing 633 666

MSM31215 Certificate III in Recreational Vehicle and Accessories Retailing 501 525

MSM40116 Certificate IV in Process Manufacturing 1045 1100

MSM41015 Certificate IV in Recreational Vehicles 952 1002

MSM41115 Certificate IV in Recreational Vehicle and Accessories Retailing 926 975

MSM50316 Diploma of Production Management 751 790

MSM51015 Diploma of Recreational Vehicles 490 515


UNITS OF COMPETENCY AND NOMINAL HOURS

RTOs are advised that there is a mapping inside the Training Package (Companion Volume) that describes the relationship between new units and superseded or replaced units from the previous version of MSM Manufacturing Training Package, Release 2. Information regarding transition arrangements can be obtained from the state or national VET Regulating Authority (see Contacts and Links section). You must be sure that all training and assessment leading to qualifications or Statements of Attainment from the MSM Manufacturing Training Package, Release 2 is conducted against the Training Package units of competency and complies with the assessment requirements.

List of the Units of Competency and Nominal Hours

Unit Code Unit Title Nominal Hours

MSMBLIC001 Licence to operate a standard boiler 40

MSMBLIC002 Licence to operate an advanced boiler 60

MSMENV172 Identify and minimise environmental hazards 20

MSMENV272 Participate in environmentally sustainable work practices 30

MSMENV472 Implement and monitor environmentally sustainable work practices 40

MSMENV672 Develop workplace policy and procedures for environmental sustainability

50

MSMOPS100 Use equipment 30

MSMOPS101 Make measurements 30

MSMOPS102 Perform tasks to support production 30

MSMOPS200 Operate equipment 40

MSMOPS201 Cut polymer materials 20

MSMOPS202 Fabricate polymer products 40

MSMOPS212 Use organisation computers or data systems 30

MSMOPS244 Lay out and cut materials 30

MSMOPS301 Treat corrosion 20

MSMOPS363 Organise on-site work 30

MSMOPS400 Optimise process/plant area 60

MSMOPS401 Trial new process or product 60

MSMOPS601 Design equipment and system modifications 80

MSMPCI101 Adapt to work in industry 30

MSMPCI102 Apply effective work practices 40

MSMPCI103 Demonstrate care and apply safe practices at work 30

MSMPCII295 Operate manufacturing equipment 40

MSMPCII296 Make a small furniture item from timber 0

MSMPCII297 Make an object from cloth using an existing pattern 0

MSMPCII298 Make an object from metal 0

MSMPCII299 Make an object from plastic 0

MSMPER200 Work in accordance with an issued permit 20

MSMPER201 Monitor and control work permits 20



MSMPER202 Observe permit work 20

MSMPER205 Enter confined space 30

MSMPER300 Issue work permits 20

MSMPER400 Coordinate permit process 30

MSMRV310 Fit recreational vehicle floor 40

MSMRV311 Fit furniture in a recreational vehicle 25

MSMRV312 Fit water systems in a recreational vehicle 16

MSMRV313 Fit 12 V cable systems in a recreational vehicle 20

MSMRV314 Construct and fit roof to a recreational vehicle 20

MSMRV315 Construct and fit slide out in a recreational vehicle 30

MSMRV316 Fit appliances in a recreational vehicle 25

MSMRV317 Install solar equipment on a recreational vehicle 20

MSMRV318 Fit cladding to a recreational vehicle 20

MSMRV319 Fit front and rear moulds to a recreational vehicle 10

MSMRV320 Fit windows and doors to a recreational vehicle 30

MSMRV321 Fit required external items to a recreational vehicle 20

MSMRV322 Fit required external electrical components to a recreational vehicle 20

MSMRV323 Fit required internal items to a recreational vehicle 15

MSMRV324 Conduct final quality inspection for a recreational vehicle 20

MSMRV325 Fabricate a chassis and suspension for a recreational vehicle 45

MSMRV350 Remove and replace a recreational vehicle roof 20

MSMRV351 Remove and replace a recreational vehicle floor 40

MSMRV352 Remove and replace a recreational vehicle sidewall cladding 20

MSMRV353 Remove and replace a recreational vehicle shower cubicle 24

MSMRV354 Remove and replace a recreational vehicle shower walls 24

MSMRV355 Remove and replace a camper/pop-top roof 20

MSMRV356 Remove and replace gas struts and roof lifting equipment on a recreational vehicle

10

MSMRV357 Remove and replace external components of a recreational vehicle 20

MSMRV358 Modify the body of a recreational vehicle 40

MSMRV359 Install additional appliances in a recreational vehicle 20

MSMRV360 Service camper wind up systems 10

MSMRV361 Repair dry rot in a recreational vehicle 30

MSMRV362 Install and repair battery systems in a recreational vehicle 15

MSMRV363 Complete pre-delivery check of a recreational vehicle 15

MSMRV364 Hand over a recreational vehicle to a customer 15

MSMRV365 Remove and refit body moulding 10

MSMRV366 Fit transfers and decals to a recreational vehicle 10

MSMRVG201 Tow a recreational vehicle safely 10



MSMRVS202 Repair/service LPG systems in a recreational vehicle 30

MSMRVS401 Assess and quote to service a recreational vehicle 40

MSMRVT201 Apply technical knowledge of recreational vehicle manufacturing to work activities

20

MSMSUP100 Apply workplace context to own job 20

MSMSUP101 Clean workplace or equipment 20

MSMSUP102 Communicate in the workplace 20

MSMSUP106 Work in a team 30

MSMSUP200 Achieve work outcomes 30

MSMSUP204 Pack products or materials 20

MSMSUP205 Transfer loads 20

MSMSUP210 Process and record information 30

MSMSUP230 Monitor process operations 30

MSMSUP240 Undertake minor maintenance 30

MSMSUP273 Handle goods 20

MSMSUP280 Manage conflict at work 20

MSMSUP291 Participate in continuous improvement 30

MSMSUP292 Sample and test materials and product 40

MSMSUP300 Identify and apply process improvements 40

MSMSUP301 Apply HACCP to the workplace 40

MSMSUP303 Identify equipment faults 40

MSMSUP309 Maintain and organise workplace records 20

MSMSUP310 Contribute to the development of workplace documentation 30

MSMSUP330 Develop and adjust a production schedule 30

MSMSUP382 Provide coaching/mentoring in the workplace 40

MSMSUP383 Facilitate a team 30

MSMSUP390 Use structured problem-solving tools 40

MSMSUP400 Develop and monitor quality systems 50

MSMSUP404 Coordinate maintenance 40

MSMSUP405 Identify problems in fluid power system 50

MSMSUP406 Identify faults in electronic control 50

MSMTMINS301 Inspect a range of simple measures 30

MSMTMINS302 Inspect a range of simple measuring instruments 30

MSMTMINS401 Inspect a range of weighing instruments 60

MSMTMINS402 Inspect liquid measuring instruments using volume measures 60

MSMTMINS403 Inspect a range of trading practices 50

MSMTMINS404 Inspect a range of pre-packaged products 60

MSMTMINS501 Inspect a range of complex measuring instruments 60

MSMTMREF301 Use and maintain reference standards 20



MSMTMVER301 Verify simple measures 30

MSMTMVER302 Verify simple measuring instruments 30

MSMTMVER401 Verify weighing instruments 60

MSMTMVER402 Verify liquid measuring instruments using volume measures 60

MSMTMVER403 Verify inspector's class reference standards 50

MSMTMVER501 Verify complex measuring instruments 50

MSMWHS100 Follow WHS procedures 20

MSMWHS110 Follow emergency response procedures 20

MSMWHS200 Work safely 30

MSMWHS201 Conduct hazard analysis 20

MSMWHS205 Control minor incidents 30

MSMWHS210 Undertake first response to non-fire incidents 20

MSMWHS212 Undertake first response to fire incidents 30

MSMWHS216 Operate breathing apparatus 20

MSMWHS217 Gas test atmospheres 30

MSMWHS218 Control the risks of falls 20

MSMWHS300 Facilitate the implementation of WHS for a work group 40

MSMWHS400 Contribute to WHS management system 40

MSMWHS401 Assess risk 40

MSMWHS503 Maintain WHS management system 50

MSMWHS510 Manage risk 50

MSMWHS601 Develop WHS management system 60

MSMWJ201 Use high pressure water jetting equipment 60

MSMWJ301 Operate a high pressure water jetting system 60

MSMWJ302 Operate a drain cleaning system 40

MSMWJ303 Operate a vacuum loading system 40


SAMPLE TRAINING PROGRAMS

A range of Sample Training Plans have been provided to demonstrate the flexibility of qualifications contained in the MSM R2 Manufacturing Training Package, but are by no means mandatory.

Occupation / Pre-vocational Program

Work Function

Qualification Title Certificate I in Manufacturing (Pathways)

Qualification Code

MSM10216

Description Completion of this qualification should provide the student with a set of competencies that collectively open up pathways into employment and/or further study.

Unit Code Unit Title Hours

Core

MSMPCI101 Adapt to work in industry 30

MSMPCI102 Apply effective work practices 40

MSMPCI103 Demonstrate care and apply safe practices at work 30

Elective Units

MSFFM1002 Operate basic woodworking machines 100

MSFFM2001 Use furniture making sector hand and power tools 40

MSFFM2002 Assemble furnishing components 20

MSFFM2003 Select and apply hardware 16

MSFFM2005 Join solid timber 8

MSMPCII296 Make a small furniture item from timber 0

Total Hours 284


Occupation / Production Assistant

Work Function

Qualification Title Certificate I in Process Manufacturing

Qualification Code

MSM10116

Description Appropriate for a person working as a production assistant under direct supervision.


Core

MSMSUP100 Apply workplace context to own job 20


MSMWHS100 Follow WHS procedures 20

Elective Units

MSMOPS100 Use equipment 30




Total Hours 180


Occupation / Manufacturing Trainee

Work Function

Qualification Title Certificate II in Manufacturing Technology

Qualification Code

MSM20216

Description For a career start in Manufacturing


Core



MSS402001 Apply competitive systems and practices 40

MSS402051 Apply quality standards 30

MSS402080 Undertake root cause analysis 50

Electives

MSMPCII295 Operate manufacturing equipment 40


MSS402002 Sustain process improvements 40

MSS402010 Interpret product costs in terms of customer requirements 40

MSS402050 Monitor process capability 30

Total Hours 360


Occupation / Production Operator

Work Function

Qualification Title Certificate II in Process Manufacturing

Qualification Code

MSM20116

Description Appropriate for a person working as a production operator in a process manufacturing enterprise.


Core




Electives


MSMOPS200 Operate equipment 40





MSMSUP240 Undertake minor maintenance 30


MSS402020 Apply quick changeover procedures 40


TLID2010 Operate a forklift 40

Total Hours 450


Occupation/ Work Function

Team Leader - Manufacturing

Qualification Title Certificate III in Process Manufacturing

Qualification Code

MSM30116

Description Appropriate for a person working as an advanced production operator in a process manufacturing enterprise


Core





Electives

MEM09002B Interpret technical drawing 40

MEM15003B Use improvement processes in team activities 40

MSMSUP292 Sample and test materials and product 40

MSMSUP300 Identify and apply process improvements 40





MSMWHS300 Facilitate the implementation of WHS for a work group 40

MSS402002 Sustain process improvements 40

MSS402020 Apply quick changeover procedures 40

MSS402030 Apply cost factors to work practices 40

MSS402040 Apply 5S procedures 40

MSS402060 Use planning software systems in operations 40


TAEDEL301 Provide work skill instruction 40


Total Hours 800



Protective Coating Applicator

Qualification Title Certificate III in Surface Preparation and Coating Application

Qualification Code

MSM30216

Description Appropriate for a person preparing surfaces and / or applying protective coatings in accordance with technical specifications.


Core

MEM12023A Perform engineering measurements 30

MEM12024A Perform computations 30

MEM14004A Plan to undertake a routine task 10

MEM14005A Plan a complete activity 20

MEM15002A Apply quality systems 20

MEM15024A Apply quality procedures 10

MEM16006A Organise and communicate information 20

MEM16007A Work with others in a manufacturing, engineering or related environment 10

MEM16008A Interact with computing technology 20



Electives

MEM08007B Control surface finish production and finished product quality 40

MEM08002C Pre-treat work for subsequent surface coating 40

MEM08012B Prepare surfaces by abrasive blasting (basic) 40

MEM08013B Prepare surfaces by abrasive blasting (advanced) 40

MEM08014B Apply protective coatings (basic) 40

MEM08015B Apply protective coatings (advanced) 40

MEM08016B Control blast coating by-products, materials and emissions 10

MEM11001C Erect/dismantle scaffolding and equipment 40

MEM11010B Operate mobile load shifting equipment 40

MEM11012B Purchase materials 60

MEM11022B Operate fixed/moveable load shifting equipment 40

MEM13003B Work safely with industrial chemicals and materials 20

MEM15003B Use improvement processes in team activities 40

MEM18001C Use hand tools 20

MSMOPS202 Fabricate polymer products 40



PMBPROD242 Bond polymers to surfaces 40

PMBPROD323 Produce powder coated products 40

PMBPROD375 Vulcanise products using an autoclave 40

Total Hours 980



Manufacturing Team Leader / Specialist Technician

Qualification Title Certificate IV in Process Manufacturing

Qualification Code

MSM40116

Description Appropriate for a person working as a team leader and / or specialist technician in a medium to large manufacturing enterprise.


Core






Electives

MSMOPS400 Optimise process/plant area 60





MSMSUP404 Coordinate maintenance 40

MSMWHS400 Contribute to WHS management system 40

MSMWHS401 Assess risk 40

MSS403002 Ensure process improvements are sustained 50

MSS403010 Facilitate change in an organisation implementing competitive systems and practices

50

MSS403040 Facilitate and improve implementation of 5S 50

MSS403041 Facilitate breakthrough improvements 40

MSS404052 Apply statistics to operational processes 40

MSS404060 Facilitate the use of planning software systems in a work area or team 50

MSS404081 Undertake proactive maintenance analyses 50

PMAOPS402 Respond to abnormal process situations 50

PMAOPS405 Operate complex control systems 80

PMASUP410 Develop plant documentation 30

PMASUP420 Minimise environmental impact of process 40

PMAWHS420 Develop first aid procedures and manage resources 40

PMBTECH406 Diagnose production equipment problems 50

Total Hours 1100



Production Manager / Section Leader

Qualification Title Diploma of Production Management

Qualification Code

MSM50316

Description Appropriate for a person working as a production manager and / or section leader for a medium to large manufacturing enterprise.


Core

MSMENV472 Implement and monitor environmentally sustainable work practices 40

Electives

BSBMGT502 Manage people performance 70

BSBWRK510 Manage employee relations 80

MEM14001B Schedule material deliveries 80

MSS015015 Evaluate sustainability impact of a process 80

MSS405022 Design a process layout 80

MSS405032 Analyse cost implications of maintenance strategy 60

MSS405050 Determine and improve process capability 80

TLIA5058 Manage facility and inventory requirements 140

TLIP4013 Implement and monitor logistics planning and process 80

Total Hours 790


Occupation / Work Function

Entry Level Production worker

Qualification Title Certificate II in Recreational Vehicle Manufacturing

Qualification Code

MSM21115

Description This sample training program is appropriate for a person working in the recreational vehicle industry as an entry level production worker.

Notes For advice on how to choose electives other than those listed below, please refer to the Manufacturing Training Package (MSM R1) and its Qualifications Packaging Rules or contact the CMM Automotive on (03) 9425 5761.


Core




Electives

AURVTT3016 Fabricate frame structures 40

AURVTT019 Fabricate and install canopies and curtains 40





MSMRV319 Fit front and rear moulds to a recreational vehicle 10





Total hrs 380



Repair Worker

Qualification Title Certificate II in Recreational Vehicle Service and Repair

Qualification Code

MSM21015

Description This sample training program is appropriate for a person working in the recreational vehicle industry as an entry level repair worker.

Notes For advice on how to choose electives other than those listed below, please refer to the Manufacturing Training Package (MSMr1) and its Qualifications Packaging Rules or contact the CMM Automotive on (03) 9425 5761.


Core




Electives

AURETR015 Inspect, test and service batteries 10

AURTTB2001 Inspect and service braking systems 20

AURVTS004 Repair vehicle composite material components 30

AURVTG011 Install side vehicle windows 15





10




Total hrs 269



Repair Technician

Qualification Title Certificate III in Recreational Vehicle Service and Repair

Qualification Code

MSM31015

Description This sample training program is appropriate for a person working in the recreational vehicle industry as repair technician.



Core




Electives

AURETR012 Test and repair basic electrical circuits 40

AURETB001 Diagnose and repair electric braking systems 20


AURTTD004 Inspect and service suspension systems 10

MSMRV350 Remove and replace a recreational vehicle roof 20

MSMRV351 Remove and replace a recreational vehicle floor 40



MSMRV354 Remove and replace a recreational vehicle shower walls 24



10

MSMRV357 Remove and replace external components of a recreational vehicle 20

MSMRV358 Modify the body of a recreational vehicle 40



MSMRV361 Repair dry rot in a recreational vehicle 30

MSMRV362 Install and repair battery systems in a recreational vehicle 15

MSMRVS202 Repair/service LPG systems in a recreational vehicle 30


Total hrs 533



Production Worker

Qualification Title Certificate III in Recreational Vehicle Manufacturing

Qualification Code

MSM31115

Description This sample training program is appropriate for a person working in the recreational vehicle industry as a production worker.



Core




Electives

AURVTT015 Fabricate and install canvas products for automotive and marine components

30

AURVTT3016 Fabricate frame structures 40

AURVTT019 Fabricate and install canopies and curtains 40

MSMRV310 Fit recreational vehicle floor 40


MSMRV312 Fit water systems in a recreational vehicle 16

MSMRV313 Fit 12 V cable systems in a recreational vehicle 20

MSMRV314 Construct and fit roof to a recreational vehicle 20


MSMRV317 Install solar equipment on a recreational vehicle 20


MSMRV320 Fit windows and doors to a recreational vehicle 30

MSMRV322 Fit required external electrical components to a recreational vehicle 20







Total hrs 666



Sales Person

Qualification Title Certificate III in Recreational Vehicle and Accessories Retailing

Qualification Code

MSM31215

Description This sample training program is appropriate for a person working in the recreational vehicle industry as a sales person.



Core




Electives

AURACA001 Respond to customer needs and enquiries in an automotive workplace 20

AURC341903A Apply relevant finance, leasing and insurance contracts/policies 15

AURACA003 Build customer relations in an automotive workplace 20

AURAMA004 Maintain business image in an automotive workplace 15

AURSCA002 Present automotive products and services for sale 20

AURSCA003 Apply sales procedures in an automotive workplace 40

AURSCA004 Carry out cash and non-cash payment operations 35

AURSCA005 Sell automotive products and services 40

AURSCA006 Promote automotive products and services 20

AURSAA001 Process customer complaints in an automotive workplace 20

SIRXSLS002 Follow point-of-sale procedures 20

SIRXRSK002 Minimise theft 20



MSMRVG201 Tow a recreational vehicle safely 10


20




Total hrs 525



Sales Team Leader

Qualification Title Certificate IV in Recreational Vehicle and Accessories Retailing

Qualification Code

MSM41115

Description This sample training program is appropriate for a person working in the recreational vehicle industry as sales team leader.



Core




Electives

AURACA002 Manage complex customer requirements in an automotive workplace 40

AURATA005 Estimate and quote automotive mechanical and electrical repairs 30

AURANN001 Estimate and quote automotive body repairs 15

AURV365356A Read and interpret vehicle body repair estimation/quotation 25

AURVTN032 Inspect vehicle damage and determine repair procedures 40

MEM16003B Provide advanced customer service 20

MEM16012A Interpret technical specifications and manuals 40

AURC341903A Apply relevant finance, leasing and insurance contracts/policies 15

AURAMA004 Maintain business image in an automotive workplace 15

AURSCA003 Apply sales procedures in an automotive workplace 40

AURSCA004 Carry out cash and non-cash payment operations 35

AURSCA005 Sell automotive products and services 40

AURSAA001 Process customer complaints in an automotive workplace 20


SIRXPDK001 Advise on products and services 30

AURAFA004 Resolve routine problems in an automotive workplace 20

MEM13002B Undertake occupational health and safety activities in the workplace 30

MEM15002A Apply quality systems 20

MEM15004B Perform inspection 20





AURSCA001 Select and supply automotive parts and products 100

AURSBA002 Identify and match uncommon automotive parts 40



20



Total hrs 975



Workshop Foreman or Team Leader

Qualification Title Certificate IV in Recreational Vehicles

Qualification Code

MSM41015

Description This sample training program is appropriate for a person working in the recreational vehicle industry as a workshop foreman or team leader.

Notes For advice on how to choose electives other than those listed below, please refer to the Automotive Manufacturing Training Package (AUM R1) and its Qualifications Packaging Rules or contact the CMM Automotive on (03) 9425 5761.


Core




Electives

AURATA005 Estimate and quote automotive mechanical and electrical repairs 30

AURANN001 Estimate and quote automotive body repairs 15



MEM16012A Interpret technical specifications and manuals 40


AURETR012 Test and repair basic electrical circuits 40

AURETB001 Diagnose and repair electric braking systems 20


AURTTJ002 Remove, inspect and refit wheel hubs and associated brake components 20

AURVTS004 Repair vehicle composite material components 30

CPCPCM2043A Carry out WHS requirements 50

CPCPGS3046A Install LPG systems in caravans, mobile homes and mobile workplaces 12

MEM03001B Perform manual production assembly 40

MEM07024B Operate and monitor machine/process 40

MEM13002B Undertake occupational health and safety activities in the workplace 30

MEM16002C Conduct formal interviews and negotiations 40

MEM30013A Assist in the preparation of a basic workplace layout 20



MSS402081 Contribute to the application of a proactive maintenance strategy 30

MSS403011 Facilitate implementation of competitive systems and practices 40

MSS404082 Assist in implementing a proactive maintenance strategy 50





20

MSS402021 Apply Just in Time procedures 30


Total hrs 1002



Manager or Senior Technician

Qualification Title Diploma of Recreational Vehicles

Qualification Code

MSM51015

Description This sample training program is appropriate for a person working in the recreational vehicle industry as manager or senior technician

Notes For advice on how to choose electives other than those listed below, please refer to the Automotive Manufacturing Training Package (AUM R1) and it’s Qualifications Packaging Rules or contact the CMM Automotive on (03) 9425 5761.


Core




Electives

AUMFTA001 Document manufacturing design processes 80

AURALA001 Comply with legal aspects of a service and repair contract in an automotive workplace

40

AURAMA006 Contribute to planning and implementing business improvement in an automotive workplace

120




MEM09204A Produce basic engineering detail drawings 80

Total hrs 515


CONTACTS AND LINKS

Curriculum Maintenance Manager (CMM)

General Manufacturing

Engineering Industries – Automotive

The CMM Service is provided by Executive Officers, across all industry areas covered by Training Packages.

They can assist with questions on payable and nominal hours.

This Victorian Purchasing Guide was prepared by the CMM General Manufacturing and CMM Engineering Industries – Automotive.

Paul Saunders

Address: Chisholm Institute, PO Box 684, Dandenong, Vic. 3175.

Phone/fax: 03 9238 8448 / 03 9238 8504

Email: [email protected]

Pat Thornton

Address: Private Bag 299, Somerton Vic 3062

Phone/fax: 9425 5761


Skills Service Organisation (SSO)

Manufacturing Skills Australia

This organisation is responsible for developing this MSM Release 2 Manufacturing Training Package and can be contacted for further information. You can also source copies of the Training Package and support material.

Address: PO Box 289, North Sydney, NSW, 2089.

Phone/fax: 02 9955 5500/ 02 9955 8044.


Web: http://www.mskills.com.au/

National Register for VET in Australia

Training.gov.au (TGA)

TGA is the Australian governments’ official National Register of information on Training Packages, qualifications, courses, units of competency and RTOs.

Web: http://training.gov.au

Australian Government

Department of Education and Training

The Commonwealth Department is responsible for national policies and programmes that help Australians access quality vocational education and training.

https://education.gov.au/

State Government

Department of Education and Training (DET)

DET is responsible for funding and the implementation of Vocational Education and Training (VET) in Victoria, including Apprenticeships and Traineeships policy.

(03) 9637 2000

www.education.vic.gov.au

mailto:[email protected]



http://www.mskills.com.au/

http://training.gov.au/

http://www.education.vic.gov.au/


National VET Regulatory Authority

Australian Skills Quality Authority (ASQA)

ASQA is the national regulator for Australia’s VET sector.

Info line: 1300 701 801

www.asqa.gov.au

Victorian State VET Regulatory Authority

Victorian Registration and Qualifications Authority (VRQA)

The VRQA is a statutory authority responsible for the registration and regulation of Victorian RTOs and for the regulation of apprenticeships and traineeships in Victoria.

(03) 9637 2806

www.vrqa.vic.gov.au

Industry Regulatory Bodies

Victorian Work Cover Authority

The industry Regulatory body can provide advice on licensing, legislative or regulatory requirements which may impact on the delivery of training or the issuance of qualifications in this Training Package.

Address: Level 24, 222 Exhibition Street, Melbourne, 3000. Phone: 03 9641 1555

Email:[email protected]

Web:http://www.workcover.vic.gov.au

WorkSafe

WorkSafe Victoria WorkSafe needs to provide written verification before High Risk Work Units can be added to an RTO’s scope of registration.

Info line: 1800 136 089 Web: www.worksafe.vic.gov.au

http://www.asqa.gov.au/

http://www.vrqa.vic.gov.au/

http://www.worksafe.vic.gov.au/


GLOSSARY

Code Nationally endorsed Training Package qualification code.

Title Nationally endorsed Training Package qualification title.

Unit Code Nationally endorsed Training Package unit code.

Unit Title Nationally endorsed Training Package unit title.

Maximum Payable Hours

The maximum number of hours the Victorian Government will subsidise under the Victorian Training Guarantee for the achievement of the minimum realistic vocational outcome of the qualification, as determined by the qualification packaging rules. The Maximum Payable Hours do not cover every possible combination of core and elective units available for a specific qualification.

Minimum Payable Hours The number of hours the Victorian government designates as the minimum required to deliver a qualification, taking into account contextualisation and integrated delivery efficiencies.

Scope of Registration

Scope of registration specifies the AQF qualifications and/or units of competency the training organisation is registered to issue and the industry training and/or assessment services it is registered to provide.

Nominal Hours

The anticipated hours of supervised learning or training deemed necessary to conduct training and assessment activities associated with the program of study. These hours are determined by the Victorian State Training Authority. Nominal hours may vary for a qualification depending on the units of competency selected

victorian purchasing guide for msm manufacturing … · victorian purchasing guide for msm...

Documents