vic · the capabilities and credentials that form victoria’s highly respected and capable...
TRANSCRIPT
Vic
F18 -AIRSHOW 2015No. 2 Operational Conversion Unit Pilot “Bung” performing an aerial display
at the 2015 Australian International Airshow.
FRONT COVER: RAAF F-35AVictorian companies form a significant part of the national supply chain
supporting the F-35 Joint Strike Fighter Project. Chair's Foreword
Victoria has a proud and rich history as a major national centre for the military aerospace industry. Some of the current
aircraft operated by the RAAF such as the F/A 18, PC -9 and P3 Orion were either assembled, upgraded or had major supply
chain involvement from industry in Victoria.
Our industry is now focused on the manufacture of aerospace components for military and commercial global supply chains,
the production of Unmanned Aerial Vehicles, systems development and the provision of engineering and logistics services for
the sustainment of military aircraft. In particular, the success of Victoria’s industry in winning the major national share of F35
Joint Strike Fighter supply chain work is testimony to the capabilities of our local industry.
The Australian Industry & Defence Network – Victoria, with support from the Government of Victoria, manages and supports
the Victorian Defence Alliance – Aerospace. Membership is open to all companies operating in Victoria with the potential to
supply products and services to the military and adjacent commercial aerospace markets.
The Alliance has been established to support the military aerospace industry in Victoria to win work in the domestic and
international supply chains. It presents a single point of focus for companies supplying and sustaining military aircraft
and systems to the Australian and international markets. The Alliance supports industry through advocacy, provision of
information on marketing opportunities and by establishing effective pathways for connecting Alliance members with industry
primes and key government stakeholders. It also provides opportunities for networking, collaboration and mentoring.
The Alliance has more than 120 member companies and these are listed at the back of this Directory. A significant number of
member companies are promoting their capabilities in this Directory.
I invite all those seeking proven and trusted partners for aerospace industry work to consider the capabilities of our Alliance
Members.
Jack Kormas
Chair
Victorian Defence Alliance - Aerospace
1
Victorian Defence Alliance - Aerospace Committee
Mission StatementTo maximise the opportunities and ability for Victoria’s industry to win work in the domestic and international military, and adjacent commercial, aerospace markets and to achieve sustainable
growth in the aerospace sector.
Jack Kormas Chair
Managing DirectorTextron Systems Australia Pty LtdTel: +61 3 9518 [email protected]
Michael Zimmer Deputy Chair
Managing DirectorCablex Pty LtdTel: +61 3 9575 [email protected]
Adrian Lutze Committee Member
General Manager, Aircraft Maintenance & SupportBAE Systems AustraliaTel: +61 3 9918 [email protected]
Kristen Raby Committee Member
Operations Manager MelbourneNova SystemsTel: +61 3 9024 [email protected]
Tony Carolan Committee Member
Industry AdvisorTel: +61 3 8552 [email protected]
Paul Donald Committee Member
Senior Business Development ManagerRUAG AustraliaTel: +61 (0) 468 996 [email protected]
Steve Mellor Committee Member
General Manager, Aerospace & DefenceMarand Tel: +61 3 8552 [email protected]
Dr Ken Anderson Committee Member
Defence Science ConsultantTel: +61 (0) 488 322 [email protected]
Victorian Aerospace Capabilities
Victoria’s military and commercial aerospace industry has a proven record of success in supporting the global supply
chains of manufactured components used by aerospace primes. Our industry has also been highly successful in
systems development and in the provision of engineering and logistics services to support the sustainment of RAAF
aircraft.
This success has been built of the capabilities of the many Victorian small to medium enterprises that support global
aircraft manufacture and provide the services required to sustain the aircraft used by our nation’s air force. These
companies have demonstrated their ability to meet the needs of the local and international aerospace industry and
are firmly established as trusted partners of that industry. They are well positioned to meet the future needs of the
aerospace industry.
The capabilities and credentials that form Victoria’s highly respected and capable military and commercial aerospace
industry are identified in this Directory against the following broad capability areas:
• Analysis, Modelling & Simulation
• Autonomous Systems
• Avionics / Electrical Systems
• Design & Engineering
• Information Systems
• Integration
• Manufacturing / Fabrication / Assembly
• Materials Technology
• Professional Services
• Research & Development
• Safety Systems & Testing
SCHOOL OF AIR WARFARE, SALE VICTORIAAn Officer Cadet undergoing training on the Air Combat Officer Training
System (ACOTS) at the School of Air Warfare (SAW) at RAAF Base East Sale.
3
The use of analysis and modelling and simulation tools to develop solutions for aerospace application.
Analysis, Modelling & Simulation
The design, development, production and support of autonomous (unmanned) systems and solutions for the aerospace environment.
Autonomous Systems
The design, development, production and support of electronic and electrical systems used on aircraft, artificial satellites and spacecraft. This includes communications, navigation, display and control systems.
Avionics / Electrical Systems
The provision of design and engineering services for the design and sustainment of aerospace platforms and the production of systems and components used on aircraft.
Design & Engineering
The design, development, production and support of software and hardware network and communication solutions for the aerospace environment.
Information Systems
The provision of design and engineering services to provide solutions that bring together aerospace component subsystems into a whole solution and to ensure that those sub systems function together.
Integration
The production, fabrication and assembly of components and systems for aerospace industry supply chains.
Manufacturing / Fabrication / Assembly
The development of materials, the production of components and the processing of materials into shapes and forms for use in the aerospace industry.
Materials Technology
The provision of engineering, accounting, legal, training and development, project management, information technology, logistics support and general consultancy services for aerospace industry clients.
Professional Services
The provision of research and development services related to advancing design and production processes utilised by clients in the aerospace industry.
Research & Development
The provision of testing and advisory services to ensure the safe operation of systems and equipment for aerospace application.
Safety Systems & Testing
Capability Glossary
Victorian Defence AlliancesThe Victorian Defence Alliances have been established through a partnership between the Australian Industry & Defence
Network – Victoria and the Victorian Government. Membership of the Alliances is open to all companies operating in Victoria
with the potential to supply products and services to the national and international defence industry market.
The Alliances bring focus, cohesion and unity to the actions and initiatives of companies with a shared and common
purpose in specific domains of Victoria’s defence industry sector. They allow member companies to act together to deliver
timely, cost effective and innovative solutions to meet Defence needs.
The Alliances support industry through advocacy, networking, collaboration, mentoring and capability building to assist
member companies to win work in national and international defence industry supply chains. Importantly, the Alliances
provide effective pathways for connecting Alliance members with industry primes and key government stakeholders.
5
VICTORIANDEFENCEALLIANCESUBMARINES
VICTORIANDEFENCEALLIANCEM A R I T I M E
VICTORIANDEFENCEALLIANCE
LAND SYSTEMS
VICTORIANDEFENCEALLIANCED I G I T A L
VICTORIANDEFENCE
ALLIANCES
VDA
VICTORIANDEFENCEALLIANCEA E R O S PA C E
6
Vic
Australian Industry & Defence Network – Victoria (AIDN-Vic)Champion the cause of SMEs in Victoria’s Defence industry
The Australian Industry & Defence Network – Victoria (AIDN-Vic) facilitates interaction and communication within Victoria’s
dynamic base of smaller defence supply companies, assisting members to exploit the opportunities provided by the
Australian and international Defence and security markets.
Victorian Defence Alliances
AIDN-Vic, in partnership with the Victorian Government, has established 5 Victorian Defence Alliances including the
Aerospace Alliance. The other Alliances are: VDA-Digital, VDA-Land Systems, VDA-Maritime and VDA-Submarines. The
Alliances act as a catalyst through advocacy, networking, collaboration and mentoring to assist member companies to bid
for work in national and international defence industry supply chains.
Defence Market Intelligence and Networking
AIDN-Vic helps its members’ network with other defence industry suppliers and provides connections with Defence and
defence industry prime companies. AIDN-Vic organises networking events, seminars, trade missions and a range of other
industry support initiatives.
Communication link between Industry and Government
AIDN-Vic represents the interests of its members by providing a communication link between those members and State
and Commonwealth Government Departments. These include the Commonwealth Department of Defence (Capability,
Acquisition and Sustainment Group), the Department of Industry, Innovation and Science and the Victorian Government
Department of Economic Development, Jobs, Transport and Resources. AIDN-Vic also represents its members through
advocacy on matters that shape defence and security industry policy.
National Organisation
AIDN-Vic, with over 270 member companies, is part of the AIDN National Organisation which includes State and Territory
Chapters with a combined membership of 700+ companies.
Visit www.aidn.org.au to discover the niche capabilities that you may be seeking or if you are interested in membership of
AIDN-Vic please email [email protected] or phone: +61 3 9886 9278.
7
Pilot Training, Sale, VictoriaAs part of the AIR5428 Pilot Training System project, the PC-21 will replace Air Force’s current PC-9/A and CT-4B aircraft, and will be based at RAAF Base East Sale in Victoria
9
Victorian Government SupportVictoria is Australia’s State of defence industry excellence. Victoria’s
defence industry has more than 300 companies employing around 7,000
people who make equipment and provide services for defence activities.
Renowned for its advanced manufacturing, world class research and
development and possessing a highly skilled workforce, Victoria has
proven expertise in delivering complex projects.
Victoria’s innovative world class aerospace design and manufacturing
capabilities make a significant contribution to Australia’s military
aerospace industry. Victoria has around 50 aerospace companies
supplying the Australian and global defence industry. Victorian companies
have secured 70 per cent of all work awarded to Australia over the past
decade for the F-35 Joint Strike Fighter (JSF) project, the most of any
State. The JSF project will supply 72 planes to the Royal Australian
Air Force (RAAF) including associated facilities, weapons and training.
The project is capitalising on Victoria’s extensive experience in meeting
military aerospace requirements.
Lockheed Martin is partnering Pilatus Aircraft and Hawker Pacific to
provide a new Australian Defence Force pilot training system at RAAF
East Sale. Textron Systems Australia designs and manufactures
Unmanned Aerial Vehicles for military and civilian applications. Thales’
Australia’s Melbourne Centre of Excellence for Air Traffic Management
develops and exports airspace control systems. Boeing Aerostructures
Australia, based in Melbourne, is Australia’s only designer and
manufacturer of advanced composite aerostructure components for
commercial aircraft.
Victoria also possesses significant research and development capabilities
with the Defence Science and Technology Group’s Aerospace Division’s
headquarters in Melbourne, the Defence Materials Technology Centre
undertakes research and development including materials analysis
and propulsion and energy storage, and the Defence Science Institute
facilitates defence aerospace research.
Victoria’s innovative military aerospace capabilities include:
• Advanced composite materials and production
• Component design, testing and certification
• Simulation and modelling
• Unmanned aerial vehicles
• Manufacturing
• Software development
• Platform support and systems engineering
• Air traffic management systems
• Maintenance, repair and overhaul
The Victorian Government is assisting the State’s aerospace defence
companies through:
• Targeted investment advocacy, promoting Victoria as a competitive
location for major prime defence contractors and projects
• Linking Victorian industry into domestic and international defence
supply chains
• Promoting Victorian defence industry capabilities at domestic and
international trade shows and missions
• Facilitating training, innovation, research and development
• Providing industry support to help companies improve productivity
and competitiveness in global markets.
The Victorian Government, through the Department of Economic
Development, Jobs, Transport and Resources, will continue to work
closely with the Australian Industry Defence Network – Victoria and the
Victorian Defence Alliance – Aerospace. The State Government is also
supported by the Victorian Defence Industry Advocate to promote and
develop the State’s defence industry. The government has released a
strategy to grow the defence technologies sector. The strategy can be
viewed at www.business.vic.gov.au/futureindustries
Analysis, M
od
elling &
Sim
ulation
Auto
nom
ous S
ystems
Avio
nics / Electrical S
ystems
Desig
n & E
ngineering
Inform
ation S
ystems
Integratio
n
Manuf-ng
/ Fabricatio
n / Assem
bly
Materials Techno
log
y
Pro
fessional S
ervices
Research &
Develo
pm
ent
Safety S
ystems &
Testing
•
•
• • •
• •
•
•
•
•
• •
••
•
•
•
•
•
•
••
•
•
• •
•
• •
•
•
••
•
•
•
• • • • • • •
• •
•
• • • • • •
• • • • • •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
• • • • • • • • • • • • •
•
•
•
•
•
•
• • •
•
• • •
•
• • •
• •
• • • •
•
•
• •
•
• •
•
•
•• •
• •
• •
• • •
• •
• •
• • •
• • •
•
•
• •
• •
•
• •
Advanced Composite Structures Australia Pty Ltd ________________________________________ 12
Aerospace Australia Limited____________________________________________________________ 12
Aerospace Materials __________________________________________________________________ 13
Agent Oriented Software ______________________________________________________________ 13
All Sat Communications _______________________________________________________________ 14
Altair Engineering Software Pty Ltd _____________________________________________________ 14
Amaero Additive Manufacturing ________________________________________________________ 15
AMOG Pty Ltd _______________________________________________________________________ 15
Amphenol Australia Pty Ltd ____________________________________________________________ 16
Applied Automation & Engineering ______________________________________________________ 16
Applied CCM_________________________________________________________________________ 17
Applied Fasteners & Tooling ____________________________________________________________ 17
Australian Precision Technologies _______________________________________________________ 18
APV Engineering and Testing Services ___________________________________________________ 18
APV Safety Products __________________________________________________________________ 19
Aquila Engineering Pty Ltd _____________________________________________________________ 19
ATTAR _______________________________________________________________________________ 20
Austest Laboratories __________________________________________________________________ 20
Australian Aerospace Engineering ______________________________________________________ 21
Avalon Airport ________________________________________________________________________ 21
Avionics 2000 Pty Ltd _________________________________________________________________ 22
A.W. Bell _____________________________________________________________________________ 22
BAE Systems ________________________________________________________________________ 23
Bartlett Industrial Textile Product Manufacturing __________________________________________ 23
Beak Engineering (Aust) _______________________________________________________________ 24
Bredo Mators ________________________________________________________________________ 24
Brenco Aerospace ____________________________________________________________________ 25
Cablex ______________________________________________________________________________ 25
CGB Precision Products _______________________________________________________________ 26
Chemring Australia____________________________________________________________________ 26
Cornell Design _______________________________________________________________________ 27
Deakin University _____________________________________________________________________ 27
Defence Materials Technology Centre ___________________________________________________ 28
Defence Science Institute ______________________________________________________________ 28
DRYSYS _____________________________________________________________________________ 29
ContentsChair’s Foreword ________________Inside Front Cover
VDA-Aerospace Committee ______________________ 1
Victorian Aerospace Capabilities __________________ 2
Capability Glossary _____________________________ 3
The Victorian Defence Alliances __________________ 4
Australian Industry & Defence Network - Vic _______ 6
Victorian Government Support ___________________ 8
Alliance Member List ___________________________64
Analysis, M
od
elling &
Sim
ulation
Auto
nom
ous S
ystems
Avio
nics / Electrical S
ystems
Desig
n & E
ngineering
Inform
ation S
ystems
Integratio
n
Manuf-ng
/ Fabricatio
n / Assem
bly
Materials Techno
log
y
Pro
fessional S
ervices
Research &
Develo
pm
ent
Safety S
ystems &
Testing
• • • •
• • • • •
•
•
• • •
• • • • • •
•
•
•
• • •
• • •
•
•
•
•
•
•
•
• •
•
• • •
•
• • • • • •
• • • • • •
• • • • • •
• • •
• • • • •
•
• •
•
•
•
•
• •
• •
•
• • •
• •
• • •
•
• •
• • • •
•
•
• • •
• •
• • • • • • •
•
• •
• • • • •
•
• •
•
•
•
•
•
•
•
• • • •
•
• • •
• • •
•
•
• •
•
• •
• •
• • •
• • • • • • •
•
• • •
• • • •
• •
•
•
• •
•
•
•
•
•
• • • •
Analysis, M
od
elling &
Sim
ulation
Auto
nom
ous S
ystems
Avio
nics / Electrical S
ystems
Desig
n & E
ngineering
Inform
ation S
ystems
Integratio
n
Manuf-ng
/ Fabricatio
n / Assem
bly
Materials Techno
log
y
Pro
fessional S
ervices
Research &
Develo
pm
ent
Safety S
ystems &
Testing
• •
•
•
•
• •
•
• •
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
•
•
• • •
• •
•
•
• •
•
• • • •
• •
•
•
• •
• • • • •
• • •
•
• •
•
•
•
• •
• •
• •
•
•
• •
• •
• •
•
• • • • •
• • • •
• • • • •
•
•
•
• • • •
• •
•
•
• •
•
• •
•
•
• •
•
• •
•
•
• •
•
• • •
• •
• •
• • •
•
• • • • • •
•
•
• • • •
• •
•
•
• •
•
•
•
• •
Enersys _____________________________________________________________________________ 29
Envirofluid ___________________________________________________________________________ 30
Fire Protection Technologies ___________________________________________________________ 30
Flexible Drive _________________________________________________________________________ 31
Flight Data Systems ___________________________________________________________________ 31
Geoplex _____________________________________________________________________________ 32
GMS Composites _____________________________________________________________________ 32
GPSat Systems ______________________________________________________________________ 33
Groundmaster Engineering _____________________________________________________________ 33
H & H Machine Tools __________________________________________________________________ 34
Hargo Engineering ____________________________________________________________________ 34
Henkel ______________________________________________________________________________ 35
Hide Away Safe Securities _____________________________________________________________ 35
Hofmann Engineering _________________________________________________________________ 36
HTA Aerospace and Defense ___________________________________________________________ 36
Integra Systems ______________________________________________________________________ 37
Interlloy _____________________________________________________________________________ 37
Interchem ___________________________________________________________________________ 38
Invenio Pty Ltd _______________________________________________________________________ 38
Kidde Aerospace _____________________________________________________________________ 39
KPMG ______________________________________________________________________________ 39
L-3 Communications Australia _________________________________________________________ 40
Leonardo ____________________________________________________________________________ 40
LMATS Pty Ltd _______________________________________________________________________ 41
Logistic Engineering Services __________________________________________________________ 41
Logistic Solutions Australasia __________________________________________________________ 42
Lovitt Technologies Australia __________________________________________________________ 42
Mackay _____________________________________________________________________________ 43
Marand _____________________________________________________________________________ 43
Markerry Industries ___________________________________________________________________ 44
Matrix Applied Computing Ltd _________________________________________________________ 44
Memko Pty Ltd ______________________________________________________________________ 45
Micro Planning International ___________________________________________________________ 45
Milspec _____________________________________________________________________________ 46
Moog _______________________________________________________________________________ 46
Nezkot Precision Tooling & Engineering _________________________________________________ 47
Nova Systems _______________________________________________________________________ 47
Ocean Software ______________________________________________________________________ 48
Pennant Australasia __________________________________________________________________ 48
PHM Technology _____________________________________________________________________ 49
Pilatus Australia ______________________________________________________________________ 49
Plastool International _________________________________________________________________ 50
Pro Draft ____________________________________________________________________________ 50
Project Performance International ______________________________________________________ 51
Promand ____________________________________________________________________________ 51
PWB Anchor ________________________________________________________________________ 52
QinetiQ _____________________________________________________________________________ 52
Quartek _____________________________________________________________________________ 53
Quickstep ___________________________________________________________________________ 53
R&I Instrument & Gear Co. (Aust) Pty Ltd ________________________________________________ 54
Red Baron ALSE _____________________________________________________________________ 54
Refuel International ___________________________________________________________________ 55
RMIT University ______________________________________________________________________ 55
Ronson Gears _______________________________________________________________________ 56
RUAG Australia ______________________________________________________________________ 56
Sentient Vision _______________________________________________________________________ 57
Siemens Ltd _________________________________________________________________________ 57
Simdikoff Group _____________________________________________________________________ 58
Simuserv ____________________________________________________________________________ 58
SRX ________________________________________________________________________________ 59
Swinburne University of Technology ____________________________________________________ 59
Sypaq Systems Pty Ltd _______________________________________________________________ 60
SYSTRA Scott Lister _________________________________________________________________ 60
Textron Systems _____________________________________________________________________ 61
The PAC Group ______________________________________________________________________ 61
The University of Melbourne ___________________________________________________________ 62
Trakka Systems ______________________________________________________________________ 62
Trimcast Products Pty Ltd _____________________________________________________________ 63
12
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Professional Services •
• Royal Australian Airforce• Defence Capability and Sustainment Group• Defence Science and Technology Group• Department of Industry, Innovation & Science
KEY PARTNERS
• Department of Defence• Aviation Industry• Manufacturing Industry• Research & Development
KEY CUSTOMERS
• A global business event, attracting senior aviation, aerospace and defence industry, military and government
• Strongly supported by the Royal Australian Airforce, Airservices Australia and CASA
• Australian & International Air Chief’s in attendance
• International Aerospace Industry Supply Chain Seminars• A not-for-profit group headed by Aerospace Maritime and
Defence Foundation of Australia Limited.• Significant program of conferences, seminars and symposia
DISCRIMINATORS
• The principal activity of AAL is the biennial Australian International Airshow and Aerospace & Defence Exposition
• Promotes aviation and the development of Australia’s Industrial resources in aviation, aerospace and defence
• Promotion of careers and skills through a national program of Careers & Skills Forums around Australia.
• Works closely with not-for-profit industry groups and professional associations
CAPABILITIES
Mr Chris MacfarlaneExecutive Manager Exhibitor RelationsPO Box 4095, Geelong, VIC 3220Tel: + 61 3 5282 0500Email: [email protected]
AEROSPACE AUSTRALIA LIMITEDwww.airshow.com.au
Andre Duarte Business Development ManagerACS Australia198 Lorimer St, Port Melbourne, VIC 3207Tel: +61 3 9676 4951Email: [email protected]
• ISO 9001• JEC Asia Innovation Award Winner 2015• JEC Paris Innovation Award Winner 2014• CRC Association Star Award 2013
QUALITY APPROVALS & AWARDS
• Department of Defence• EADS / Airbus Group
KEY CUSTOMERS
• aadi Defence• CSIRO Manufacturing Flagship• Braendler Engineering• Pacific ESI
KEY PARTNERS
• Expert knowledge in the design, manufacture and maintenance of composite materials
• More than 20 years of experience in defence related composites technology development and implementation
• Patented materials and manufacturing technologies available for commercialisation
• An interdisciplinary, integrated and flexible design and
manufacturing team• Globally recognised and awarded organisation• Experience in diverse markets including aerospace, defence,
automotive, ground transport, oil and gas• Experience with ITAR related projects• Personnel with current Australian security clearance
DISCRIMINATORS
• Lightweight Composites Design, Analysis and Optimisation• Crashworthiness and Impact Simulation• Novel Composite Materials and Manufacturing Technology
Development• Fire protection technology and simulation
• Testing and Certification• Prototyping and Technology Implementation• Composite and Metal Repair Technologies• Composite and Metal Inspection and Structural Health
Monitoring
CAPABILITIES
ACS AUSTRALIAwww.acs-aus.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Materials Technology • •
Research & Development •
13
Dr. Andrew LucasManaging DirectorAgent Oriented Software Pty Ltd580 Elizabeth St, Melbourne, VIC 3000Tel: + 61 3 9349 5055Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems •
Information Systems • •
Research & Development • •
• Australian Department of Defence• RMIT & Melbourne University• Insitu Pacific Limited• Northrop Grumman
KEY PARTNERS
• Australian Department of Defence• UK Ministry of Defence• Insitu Pacific Limited• Lockheed Martin
KEY CUSTOMERS
• TacSim simulator used by DST Group to support the SEA1000 Program
• Our products have proven track records in defence, simulation & training, and heavy industry
• AOS’ intelligent agent software is the 1st product series worldwide based on the BDI model of human reasoning
• CoJACK models variations in human behaviour making virtual actors in simulations more lifelike and realistic
• C-BDI models intelligent decision-making for demanding, safety-critical applications
DISCRIMINATORS
• AOS is a world-leader in autonomous and semi-autonomous systems development
• iWD - Intelligent WatchDog, autonomous coordinates multiple unmanned surveillance systems
• IBA - Intelligent Battlespace Advisor, intelligent decision support for air defence operators
• Formidable Foes, autonomous targets for live fire training• TacSim - Tactical Simulation for Undersea Warfare, developed
by AOS with DST’s JOAD and NPS Monterey
• C-BDITM - 4th generation BDI model in C++ for safety critical applications
• CoJACKTM - Software platform for creating realistic virtual actors in LVC simulations
• JACK® - Proven software platform for building reasoning capability
CAPABILITIES
AGENT ORIENTED SOFTWAREwww.aosgrp.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly • •
Materials Technology • •
• Henkel GMBH Adhesives• RTI Corporation- Titanium• AMI Metals- Aluminium• Wencor Corp- Bearings
KEY PARTNERS
• AS 9120 RevA (Certified by LRQA)• ISO 9001:2008 (Certified by LRQA)• IAQG “OASIS” Registered• Registered under UKAS scheme
QUALITY APPROVALS & AWARDS
• Department of Defence• Quick Step -JSF Project• Marand Engineering -JSF Project• Virgin Australia
KEY CUSTOMERS
• Proven Track record in Defence Projects• Only fully Australian owned company in our field• Five temperature zone monitored warehouse• Time and Temperature sensitive materials specialists• ITARS & EAR Trained and Experienced Staff
• Metals, Adhesives, Sealants and Surface Treatments Stocked in Melbourne
• Weekly Consolidated Dangerous Goods Air Freight Shipments from Europe and USA
DISCRIMINATORS
• Hysol Metal to Metal Structural Adhesives• Composite Resins,Fillers and Potting Compounds• PR & PS Fuel Tank and General Sealants• Alodine and Anti-Corrosion Treatments• Aircraft Grade Aluminium & Titanium
• Laminated Shims• Ball, Roller and Rod End Bearings• All certified and Traceable
CAPABILITIES
Derek ChenhGeneral ManagerAerospace Materials Pty Ltd2/6 Ovata Dr, Tullamarine, VIC 3043Tel: +61 3 9338 6995Email: [email protected]
AEROSPACE MATERIALS PTY LTDwww.aerospacematerials.com.au
14
• Engineering: nCode, FEMFAT, Materialise, MapleSim• Engineering: ESAComp, Moldex3D, Fluidyna• Engineering: MADYMO, Airbus STRENGTH2000• Computing: Microsoft Azure, SGI, Cray, HP, Amazon AWS
KEY PARTNERS
• 2012 Gold Stevie – Computer Software Company of the Year• NASA Engineering and Safety Centre Group Award• 2012 Top Design Software Brands in the Electronics Industry• 2010 Boeing Performance Excellence Award
QUALITY APPROVALS & AWARDS
• Aerospace: Airbus, Boeing, Lockheed Martin, Raytheon• Automotive: Ford, Ferrari, Mercedes, Porche, TESLA• Defence: BAE Systems, Thales, Australian DoD, US DoD• Marine: DCNS, British Aircraft Carrier Alliance, US Navy
KEY CUSTOMERS
• Over 30 years’ experience helping companies innovate and develop superior products
• Combination of engineering software and services means our software gets the most rigorous testing, and our engineers have direct access to the developers
• IIndustry leading optimisation tools allow you come up with reliable minimum mass designs first time
• Extensive experience across all industry verticals, from sub-sea to aerospace
• Trusted by the world’s largest (and smallest) engineering companies and OEMs
• Altair HyperMesh is the industry leading finite element pre-processor
• Advanced topology optimisation and PolyNURBS interpretation facilitates design for 3D printing
• Multi-physics capabilities allow you to design whole systems within one environment
DISCRIMINATORS
• Altair HyperWorks is the most comprehensive, open-architecture, multi-physics CAE platform to enhance product performance and get products to the market faster.
• Altair ProductDesign consultancy deliver product engineering services from concept development through to advanced structural analysis to overcome our clients’ design challenges.
• Finite Element Analysis (FEA)
• Design optimisation• Blast and crash simulation• Electro-magnetics simulation• Computational Fluid Dynamics (CFD) with Fluid-Structure
Interaction (FSI)• Multi-Body Dynamics (MBD)
CAPABILITIES
Alex QuirkSenior Applications EngineerAltair Engineering Software Pty LtdSuite 208, 434 St Kilda Rd, Melbourne, VIC 3004Tel: +61 (0) 449 877 808Email: [email protected]
ALTAIR ENGINEERING SOFTWARE PTY LTDwww.altair-anz.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Design & Engineering • •
Professional Services •
Research & Development • •
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Integration •
Manufacturing / Fabrication / Assembly •
Safety Systems & Testing •
• Ocean Signal UK - rescueME / SafeSea• National Products Inc USA - RAM Mounts• Pivotel Satellite AUS• Iridium Satellite USA
KEY PARTNERS
• 2008 - Australian SPOT Distributor• 2014 - Australian Ocean Signal Distributor• 2014 - Ocean Signal Service Accreditation
QUALITY APPROVALS & AWARDS
• Australian Border Force• Department Of Defence• Australian Maritime Safety Authority (AMSA)• Air Ambulance Victoria
KEY CUSTOMERS
• Established in 2000 and Melbourne Based• Satellite Communications Specialists for voice, tracking and
data.• Staff with extensive backgrounds in Search & Rescue, Defence
and Marine industries.• Proven support of all products from trial to implementation
stage.
• Worlds smallest and most advanced satellite safety products.• Industry Leading products for quality and value.• Expert product knowledge and advice.• Time critical supply of parts and products
DISCRIMINATORS
• Industry leader for expertise and knowledge in satellite communications.
• Major distributor of satellite safety, voice, tracking and data products
• Lone and Remote worker monitoring and tracking specialists.
• Distributor of RAM Mounts suitable for mounting electronic & other equipment in aircraft
• Expert advice on all products and the ability to assist from trials through to implementation stage.
CAPABILITIES
Ian VeitchDirectorP I Plus Pty Ltd t/a All Sat Communications18/111 Lewis Rd, Wantirna Sth, VIC 3152Tel: 1300 747 587Email: [email protected]
ALL SAT COMMUNICATIONSwww.allsat.com.au
15
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Professional Services •
Research & Development •
Safety Systems & Testing •
• Monash University
KEY PARTNERS
• ISO 9001:2008 Quality Management Systems• AS/NZS 4801:2001 & OSHAS 18001:2007• ISO 14001:2004• Multiple Engineers Australia Excellence Awards
QUALITY APPROVALS & AWARDS
• Australian Aerospace, Boeing, SAAB, Indra• Raytheon, Rohde & Schwarz, Tenix, BAE Systems• ADI, AMC, ASC, CAE, Thales, UGL• RAAF, RAN, Army, DMO (now CASG), DGTA, DGNCSA
KEY CUSTOMERS
• Proven track record working with Defence and Defence Prime Contractors for over 15 years.
• Significant working experience with DGTA, PO’s and SPO’s.• Delivered DGTA Aerospace System Safety Course for 5 years
to a majority of SPO’s.• One of the largest System Safety capabilities domestically,
with professionally qualified Safety• Specialist advanced modelling capability for analysis,
simulation and testing.• Specialist software assurance capability for Software SIL
assessments and expert advice.• Significant operational experience with senior ex-Defence
staff members.• Multiple staff with Australian Defence security clearances
and facility DISP Accreditation.
DISCRIMINATORS
• System Safety iaw ARP4754 including the application of RTCA DO-254.
• Software Safety iaw ARP4754 including the application of RTCA DO-178.
• Software Assurance iaw RTCA DO-178 B or C including Baseline Assessments and Software
• Allocation of Design Assurance Levels (DAL) through FHA including the DAL Verification
• Safety Management System and Safety Planning iaw ICAO standards.
• Reliability, Availability and Maintainability (RAM) studies including full lifecycle cost modelling.
• Advanced analysis through Computational Fluid Dynamics (CFD) and Structural assessments.
• Master Class System Safety Management and Application Training Courses.
CAPABILITIES
AMOG CONSULTINGwww.amog.consulting
Chris Van BerendonckDirector of Safety and RiskAMOG Pty Ltd19 Business Park Dr, Notting Hill, VIC 3168Tel: + 61 3 9542 3700Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering •
Integration •
Manufacturing / Fabrication / Assembly • •
Materials Technology • •
Professional Services •
Research & Development •• Safran• Raytheon US• Boeing US• Thales
KEY PARTNERS
• ISO9001• AS 9100C (2017)• Safran strategic partnership award for AM 2016
QUALITY APPROVALS & AWARDS
• Safran• Raytheon US• Boeing US• Virgin Australia
KEY CUSTOMERS
• Proven track record with global defence and aerospace primes• XL size AM Machines (up to 800mm x 400mm x 500mm) with
SLM• Repair of metal components up to 7 x 2 x 1.5 meters in size
via Direct Laser Deposition (DLD)• Extensive experience in optimising parts for AM from more
traditional designs
• In-house developed light weighting and optimisation tools that harness AM
• Dedicated research team with extensive experience in the research and optimisation of materials
DISCRIMINATORS
• Global leaders in Additive Manufacturing (AM) or 3D printing in metal
• Extensive experience designing and optimising components for AM
• Largest AM machines in the world with production and R&D capabilities
• Able to develop new materials for AM for new applications• Repair of metal components up to 7 x 2 x 1.5 meters in size
via Direct Laser Deposition (DLD)• Broad range of aerospace materials including aluminum,
titanium and nickel super alloys
CAPABILITIES
AMAERO ADDITIVE MANUFACTURINGwww.amaero.com.au
Ben BatagolBusiness Development ManagerAmaero Engineering Pty Ltd13 Normanby Rd, Notting Hill, VIC 3168Tel: + 61 3 9905 9847Email: [email protected]
16
APPLIED AUTOMATION & ENGINEERING PTY LTDwww.appliedauto.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Professional Services •
Research & Development •
• John Hart, Bosch, Isel GMBH, Weiss GMBH• Electromold,Dotmar,Interlloy, SEI Carbide• ThyssenKrupp Aerospace, Bohler Uddeholm• Omron,Datalogic,NHP,Beckoff,Remtron
KEY PARTNERS
• ISO 9001-2015• ITAR, EAR compliant
QUALITY APPROVALS & AWARDS
• Textron Systems Australia, ES&S Earth Sciences• Pfizer Pharmaceuticals, AstraZeneca Australia• Denso Australia, TI Automotive, Hella,• Toyota Boshoku, Bosch Australia, MIPAC
KEY CUSTOMERS• Highly skilled and accredited work force, utilizing the latest
machine tools and technology.• Specializing in complex machining of thin wall components
and assemblies.• Providing prototype design and development of components
through to actual manufacturing in one facility• Flexible, Singular, low to medium volume manufacturing.
DISCRIMINATORS
• Aerospace Component manufacture from alloys and carbon composites using multi Axis machining technology
• R&D, prototype development of components and tooling utilizing 3D printing
• Mechanical and Electrical Design using Solid Works.• Hyper Mill, CAD, CAM, 5 Axis Cnc Machining, turning and
fabrication,
• Mechanical and electrical assembly of enclosures, field wiring, PLC and software programming.
• Mechanical assembly of complex mechanisms, pneumatics, linear drives, servo motors and associated hardware.
• Design and manufacture of automation, assembly systems for the Pharmaceutical industry.
CAPABILITIES
Andrew ShawDirectorApplied Automation & Engineering Pty Ltd49 Howleys Rd, Notting Hill, VIC 3168Tel: + 61 3 9545 5011Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
• Amphenol Military & Aerospace Operations• Amphenol Socapex S.A.S.• Amphenol Limited• Amphenol Fiber Systems International
KEY PARTNERS
• ISO9001:2008
QUALITY APPROVALS & AWARDS
• Boeing• Thales• BAE Systems• Airbus Industries
KEY CUSTOMERS
• World leader in the design, manufacture and supply of• high-performance interconnect systems for harsh
environments• Unparalleled product breadth of military specification
connectors• A technology leader participating in major Aerospace
programs from the earliest inception to full production
• Leading supplier of interconnect solutions to the aircraft engine market.
• Australian based fibre optic cable assembly facility• Local Engineering design and support team for interconnect
solutions
DISCRIMINATORS
• Australian assembled Harsh Environment Fibre Optic harnesses and cable solutions
• Fibre-to-Antenna (FTTA) Connector solutions in a rugged, affordable package
• EN4644 APeX Rectangular high-density modular connection system
• EMI & EMP protections solutions for sensitive circuits• High speed data transmission interconnects to 10Gb/s and
beyond
• Hermetically sealed and filtered, gas tight barriers and high-pressure solutions
• RF/ Microwave coaxial connectors, cable assemblies and passive components
• LDG P-Clamps secure, guide and manage high performance aerospace cables and pipes through aircraft
CAPABILITIES
Stephen RichardsSales and Marketing DirectorAmphenol Australia Pty Ltd22 Industry Bvd, Carrum Downs, VIC 3201Tel: + 61 3 8796 8888Email: [email protected]
AMPHENOL AUSTRALIA PTY LTDwww.amphenol.com.au
17
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering • •
Integration •
Manufacturing / Fabrication / Assembly • •
Materials Technology •
• Click Bond • Cherry Aerospace• Avibank• Zephyr Tool
KEY PARTNERS
• AS9120A BAE, Airbus, Boeing• LMA-PK004• Department of Defence Cage Code Z0TF6• Factory approval for key USA Fastener and Assembly Tooling
manufacturers
QUALITY APPROVALS & AWARDS
• Boeing, Airbus, BAE, Sikorsky, Jetstar, Virgin, Airfilte• Marand, Quickstep, Lovitt Technologies• Supacat, Broens ,Thales• Aerosonde, Trakka
KEY CUSTOMERS
• Defence programs are our core business• Our customers see us as a trusted source of information and
support not typically offered by local distributors• Through extensive consultation, customers have access to our
vast assembly application experience• We understand the relationship between design, procurement,
production and maintenance/repair
• We offer technical support throughout the product life cycle• Certified in product training• We offer multiple solutions to maximise design options in
addition to increasing assembly efficiency and safety
DISCRIMINATORS
• Specialised fastening systems and assembly tooling• Structural bonded fasteners and tooling• Threaded fasteners/inserts• Blind fasteners and tooling• Specialised cutting tools
• Temporary fasteners• Quick release pins and lanyards• Technical support and training
CAPABILITIES
Colin Campbell General ManagerApplied Fasteners and Tooling100 Harbour Esp, Docklands, VIC 3008 Tel: +61 3 9939 8979Email: [email protected]
APPLIED FASTENERS AND TOOLINGwww.appliedfastenersandtooling.com
Dr Darrin StephensDirectorApplied CCM Pty Ltd72 Boyd Street, Dandenong North, VIC 3175Tel: + 61 3 8376 6962Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Design & Engineering •
Professional Services • •
Research & Development •
• Pointwise Inc• Celeritas Simulation Technology LLC
KEY PARTNERS
• DST Group• CSIRO
KEY CUSTOMERS
• Australian security cleared staff• Proven record of supply to defence• Best in class CFD mesh generation software• Open source CFD software• Best in class overset software• Independent R & D• In dept technical expertise in HPC and CFD
DISCRIMINATORS
• Computational Fluid Dynamics (CFD)• Modeling and simulation• Mesh generation software• Overset hole cutting software• Engineering simulation software
CAPABILITIES
APPLIED CCMwww.appliedccm.com.au
18
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Research & Development •
Safety Systems & Testing •
• Australian Performance Vehicles Pty Ltd (Parent)• Humanetics and DTS for supply of test equip. • Benchmarking with a Japanese OE Auto Company.
KEY PARTNERS
• ISO/IEC 17025:2005• FIA certified Motorsport Lab
QUALITY APPROVALS & AWARDS
• ANCAP and International Automotive Companies• ADF, CSIRO, Thales Australia, Sikorsky, BAE Systems Australia • TCP implemented for ITAR and Export Ctls
KEY CUSTOMERS
• The APV Test Centre is the most advanced industrial test facility of its type in the Southern Hemisphere.
• Track record in testing services for Military MRAP Vehicles and Applications.
• Supports Australia’s Advanced Manufacturing sector with test programs for advanced product development.
• The Test Centre is an R&D Lab supporting unique test programs with a highly experienced engineering team.
• Environmental and Corrosion test programs, completed to both commercial and US Mil-Spec requirements.
• Provides testing services to international standards, including FMVSS, ECE and ADR.
• Track record in supporting Advanced Manufacturing, Defence and Aerospace, Rail, Truck, Automotive, and Transport
• The only FIA certified Lab within the region and ISO air-bag lab in Australia.
DISCRIMINATORS
• The Test Centre is the most advanced of it’s type in the Southern Hemisphere.
• Crash & Safety Testing, Environmental & Life Cycle Testing, Mechanical & Dynamic Testing.
• Field testing with Data Acquisition and High Speed Imaging, including military applications.
• Personal Survivability Testing for military and aerospace. (An ADF Priority Industry Capability, PIC)
• Helicopter, Military, Automotive and Transport Seat testing.• Durability, vibration and dynamic crash for Composite
Structures, Electronics, Assemblies and Vehicles.• Cargo Retention testing.• Bull bar validation, vehicle accessories and fabricated
component testing.
CAPABILITIES
APV ENGINEERING AND TESTING SERVICES PTY LTDwww.apvcorporation.comSteve CooperGeneral ManagerAPV Engineering and Testing Services Pty Ltd1521 Hume Hwy, Campbellfield, VIC 3061Tel: + 61 3 9355 5798Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Manufacturing / Fabrication / Assembly •
• ThyssenKrupp• Electromold• Okuma Australia• Iscar Australia
KEY PARTNERS
• IS09001:2008• Victorian Manufacturing Hall of Fame• Victorian Small Business of the Year 2015• Casey Cardinia Manufacturing Award 2014
QUALITY APPROVALS & AWARDS
• Defence • Aerospace • Medical • Security
KEY CUSTOMERS
• 20 Years engagement with Defence Industry Sector• Total Management of Manufacturing Solutions• Product Support through Utilization of Advanced CNC
Technology• Full Traceability and Quality Assurance • Lean Manufacturing Model - JIT Delivery
• Highly Skilled Staff with sound Engineering and Manufacturing expereince
• M1 MRP System• 25 Year established Precision Component Manufacturer
DISCRIMINATORS
• Precision CNC Turning and Machining• Full 5 Axis Turning and Machining• Assembly and Full Project Management Systems• Lean Manufacturing Systems • Low to High Volumes including Rapid Prototyping
• Through Life Support• Digital Communication• Quick Turnaround Lead Time
CAPABILITIES
Adam Sutton Operations / Business DevelopmentAustralian Precision Technologies Ply Ltd26-28 Intrepid St, Berwick, VIC 3806Tel: + 61 3 9768 9400Email: [email protected]
AUSTRALIAN PRECISION TECHNOLOGIESwww.aptengineering.com
19
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Avionics / Electrical Systems •
Design & Engineering •
• Hawker Pacific• Aerospace NDI Pty Ltd• Airflite Pty Ltd• Network Aviation
KEY PARTNERS
• ISO 9001
QUALITY APPROVALS & AWARDS
• Pilatus Aircraft Ltd• CAS-SS Panel Service Provider• DST Group Re-SET Standing Offer Panel Member• Training Aircraft Systems Program Office
KEY CUSTOMERS
• Aquila Engineering offices are close to our major customers in both Victoria and Western Australia.
• Aquila Engineering staff are well trained and use modern software tools for advanced engineering simulation.
• Our staff have extensive experience in the Defence environment and produce services iaw with ADF requirements.
• Aquila Engineering staff have experience in both minor and major Defence acquisitions.
DISCRIMINATORS
• Aerospace engineering including structures, avionics and systems design.
• Weight and balance testing.• Program / Contract Management.
• Preparation and/or evaluation of tender documentation.• Strain gauging and stress assessments.• Structural fatigue and damage tolerance assessments.
CAPABILITIES
Ian AltOperations ManagerAquila Engineering Pty LtdLevel 1, 108 Raymond St, Sale, VIC 3850Tel: + 61 3 5143 2185Email: [email protected]
AQUILA ENGINEERING PTY LTDwww.aquilaeng.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly •
Research & Development •
Safety Systems & Testing •
• Australian Performance Vehicles PtyLtd(Parent)• APV Test Centre for testing & certification • Aust. and US Military Seat Manufacturers.
KEY PARTNERS
• ISO 9001• FIA certified race harnesses
QUALITY APPROVALS & AWARDS
• Australian - CVG, KAB, Stratos • International - BAE Systems Australia, Shockride • TCP implemented for ITAR and Export Ctls• Fork Lift - Crown, Toyota, Qantas
KEY CUSTOMERS
• APV Safety Products is the market leader in Military Restraints for the Nth American and Australian MRAP vehicles
• Proven track record during the Afghanistan conflict across the US Navistar and Aust. Bushmaster MRAP fleet.
• Products tested to FMVSS, ECE, ADR and US Mil-Spec requirements.
• Proven ability to respond rapidly to meet international customer requirements.
• Strong engineering capability to support systems level Military vehicle development.
• No loss of life of any personnel wearing an APV restraint in a Navistar or Thales MRAP vehicle during Afghanistan.
DISCRIMINATORS
• APV Safety Products (Int) Pty Ltd is a specialist OEM Military Restraint manufacturer.
• Military restraints for Land and Amphibious MRAP Vehicles• Gunner straps, tether straps and specialist webbing /
restraints for Military applications .• Fork Lift and GSE seatbelts. • Agricultural, Forestry and Specialist Vehicle restraint systems.
CAPABILITIES
Chris Sweetman, Cameron HicklingGeneral Manager, Product EngineerAPV Safety Products (Int) Pty Ltd1521 Hume Hwy, Campbellfield, VIC 3061Tel: + 61 3 9355 5533Email: [email protected], [email protected]
APV SAFETY PRODUCTS PTY LTDwww.apvcorporation.com
20
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Professional Services •
Research & Development •
Safety Systems & Testing •
• Approval Specialist Pty. Ltd. (parent company)
KEY PARTNERS
• ISO/IEC 17025• A2LA Accreditation no. 2765.01 (Melbourne)• A2LA Accreditation no. 2765.02 (Sydney)
QUALITY APPROVALS & AWARDS
• Raytheon Australia• Boeing Defence Australia• Thales Australia• BAE Systems Australia
KEY CUSTOMERS
• “One Stop Shop” - a single source for environmental, EMC, electrical and telecommunication testing
• Formal accreditation for defence standards:• MIL-STD-461,810,167,202, DEFSTAN00-35, RTCA-DO160, etc• Defence knowledge and experience. Test engineers with over
40 years of combined experience in the defence industry• Largest electrodynamic shaker in Aust capable of vibration &
shock (classical & SRS) testing of equipment up to 2t
• Expertise in extreme and customized environmental testing• EMC pre-compliance and compliance testing for all stages of
product design• Proven track record with leading defence contractors -
Raytheon, Boeing, Thales, SAAB, BAE Systems etc
DISCRIMINATORS
• Accredited Test Laboratory covering Environmental, EMC, Electrical and Telecommunication testing
• Mechanical tests including vibration, shock, constant acceleration, impact, inclination, fatigue, static load & IP
• Environmental tests including climatic, UV, solar, salt-fog, altitude and pressure
• Airborne and structure-borne noise testing
• EMC/EMI tests including radiated/conducted susceptibility and emissions
• Electrical tests including Surges, ESD and transient burst testing
• Engineering consultancy services
CAPABILITIES
Nina RodoredaSite SupervisorAustest Laboratories53 Latitude Blvd. Thomastown, VIC 3074Tel: + 61 3 9464 4016Email: [email protected]
AUSTEST LABORATORIESwww.austest.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Materials Technology •
Professional Services •
Research & Development •
Safety Systems & Testing •
• Infracorr Consulting Pty Ltd• Quartek• Swinburne University
KEY PARTNERS
• NATA accredited to ISO 17025• Registered Training Organisation (RTO)• Authorised Qualifying Body (AQB) AINDT & BINDT
QUALITY APPROVALS & AWARDS
• ASC • Babcock International Group• Large Customer base throughout Australasia
KEY CUSTOMERS
• ATTAR is committed to the highest standard of service delivery and customer satisfaction
• Australian owned with over 30 years experience• Advance non-destructive testing techniques• Consulting engineers specialising in materials evaluation and
mechanical testing• Registered Training Organisation (RTO) and Authorised
Qualifying Body (AQB) for Non-Destructive Testing
DISCRIMINATORS
• Experienced engineers providing independent and expert advice in Materials evaluation and Mechanical testing
• Forensic failure analysis (includes determining root cause, life cycle and compliance assessment)
• Specialty testing in Acoustic Emission Monitoring of vessels and structures
• Audit Services, Document design and Tender review
• Non Destructive Testing Level 3 consulting; technique validation, procedure and specification writing & review
• NDT Training in all Methods• NDT Qualification & Proficiency Testing of Personnel
CAPABILITIES
Dr Adrian Grosvenor Senior Consulting EngineerATTARUnit 1, 64 Bridge Rd, Keysborough, VIC 3173 Tel: +61 3 9574 6144Email: [email protected]
ATTARwww.attar.com.au
21
• Linfox Australia• Australian Automotive Research Centre• Department of Defence
KEY PARTNERS
• A large aircraft capacity airport within a green field environment.
• Large hangars available for immediate use at a large airport.• Synergies with Australian International Airshow.• Flexible planning arrangements on a Department of Defence
owned airport.
DISCRIMINATORS
• Avalon Airport is located around 30 minutes from Melbourne. It is a Defence owned airport leased to Linfox.
• Avalon Airport has the capacity to accommodate all aircraft types.
• Avalon Airport is curfew free, and has enormous capacity for expansion.
• Avalon Airport comprises over 1,700 hectares of land.• Avalon Airport has the appropriate planning regime to
accommodate industrial, defence and aviation activities.• Avalon Airport is located close to major seaports, a freeway
and rail making logistics easy.• Avalon Airport is host of the biennial Australian International
Airshow and regularly hosts defence aircraft.• Avalon Airport offers a secure environment between
Melbourne and Geelong.
CAPABILITIES
Justin GiddingsCEOAvalon Airport Australia Pty Ltd80 Beach Rd, Lara, VIC 3212Tel: + 61 3 5227 9112Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Professional Services • •
AVALON AIRPORTwww.avalonairport.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Avionics / Electrical Systems •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Professional Services •
Research & Development •
• Arrow Falcon Exporters• Monroe Engineering
KEY PARTNERS
• CASA CAR30 Certificate of Approval Holder C604967• Defence Recognised Supplier (LoRS) – NCAGE Z0WH1• ITAR import experience for UH-1 and 206B-1 aircraft• In Progress: CASA Part 21G, CASA Part 145, AS9100 / AS9110 /
AS9120 / ISO9001 : 2015
QUALITY APPROVALS & AWARDS
• Department of Defence - Kiowa 206B1 and CH47 platforms• QBE• FAH Investments
KEY CUSTOMERS
• CASA Approved KIOWA 206B-1 helicopter fixture• Dedicated MRO company with extensive tooling• OEM trained and experienced LAME’s with engineering
degrees• Experienced test pilots (>10,000 hrs)• CASA approved to conduct Deep Level Maintenance on
medium and light platforms
• Controlled spare parts store with over 15,000 line items• Exclusive aerospace hardware distributor for Monroe
Engineering in Australia• Strategic regional geographic location – low cost, easy access
& salt free
DISCRIMINATORS
• Helicopter Maintenance, Repair and Overhaul (MRO) – medium and light platforms
• Component MRO – dynamic, composite and structural components
• Aircraft structural repair and helicopter drivetrain alignment• Tailored aircraft refurbishment, life extension programs and
avionics upgrades
• Aeronautical parts manufacturing and sheet metal repairs and fabrication
• Precision CNC machining – Fadal 8030 VMC 80” x 30” x 30”• Painting – including aluminium and magnesium surface
pre-treatment• Engineering design for modifications and repairs (CASA Part
21M)
CAPABILITIES
Adam Johnston Engineering ManagerAustralian Aerospace EngineeringP.O Box 459, Jindera, NSW 2642Tel: +61 2 6026 2614Email: [email protected]
AUSTRALIAN AEROSPACE ENGINEERINGwww.austaerospace.com
22
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly • •
Materials Technology • •
Research & Development • •
• Kittykawk• Australian Industry and Defence Network - AIDN• Australian Precision Manufacturing Group APMG• Heat Treatment Australia
KEY PARTNERS
• AS9100C, SAI Global• ISO9001:2008 SAI Global• 2016 - Victorian Export Award - Manufacturing• 2013 Manufacturer of the year - Medium
QUALITY APPROVALS & AWARDS
• Northrop Grumman• BAE Systems• Marand• Pratt & Whitney
KEY CUSTOMERS
• Lead casting source for the JSF F-35 EODAS system• Major supplier to Marand or JSF F-35 Engine installation and
removal trailer• Aluminium Equivalent Billet (ABE™) casting process for ultra
high strength aluminium castings• Established and robust local and international supply chains
for improved lead time and risk management• In-house production machining, finishing, assembly and non-
destructive testing certification• Dedicated experienced project management for aerospace
projects• Expert level experience in aluminium alloys, duplex and
standard stainless steel• Proven quality and lead time delivery capability
DISCRIMINATORS
• Specialist in high quality complex investment casting solutions• Specialist in high quality complex sand casting solutions• In-house ABE™ process producing higher strength/lower
weight aluminium castings specifically for aerospace use• Low volume rapid prototype casting capability through in-
house adaptive manufacturing• Expert in-house production machining
• Post casting and machining capability including surface treatment/ painting and assembly
• Collaborative design expertise - design for manufacture and function
CAPABILITIES
Vinesh KaranCommercial DirectorA.W. Bell Pty Ltd145 Abbotts Road, Dandenong Sth, VIC 3175Tel: + 61 3 9799 9555Email: [email protected]
A.W. BELL PTY LTDwww.awbell.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Autonomous Systems • •
Avionics / Electrical Systems • •
Design & Engineering •
Integration • •
Manufacturing / Fabrication / Assembly • •
Materials Technology •
• Honeywell, Rockwell Collins, Garmin,• Bendix King, Aerodynamix, Icom, Cambridge• EDMO, Aircraft Electronics Association• L3, FLIR, Churchill, WESCAM
KEY PARTNERS
• CASA Part 145• CASA CAR 30• DRSC Award 2011• Numerous avionics dealer awards
QUALITY APPROVALS & AWARDS
• Police agencies• BAE Systems• QANTAS/Jetstar• Business Jet operators
KEY CUSTOMERS• We are a small company that is virtually an unknown entity.
Therefore, we provide a discrete basis of support.• We specialize in domestic aerial surveillance system
integration and platform provision.• We manufacture components to allow specialist equipment
integration on to aerial platforms• We provide in-house design, integration, manufacture, install,
test and platform operations.
DISCRIMINATORS
• Aircraft component design and fabrication. Includes operator consoles, mounting & instrumentation systems.
• Airframe alterations and modifications to role specific aircraft.• Specialist welding services.• Aircraft airframe and engine line and base maintenance
services.• Aircraft avionics line and base maintenance services.
• Design integration and installation of aircraft avionics systems and surveillance systems
• Avionics component workshop repair services• Integration of workforce with end user to provide immediate
operational solutions.
CAPABILITIES
Gordon CoxGeneral ManagerAvionics 2000 Pty LtdHangar 6, Wirraway Rd, Essendon Airport, VIC 3041Tel: + 61 3 9379 9500Email: [email protected]
AVIONICS 2000 PTY LTDwww.avionics2000.com.au
23
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering • •
Manufacturing / Fabrication / Assembly • •
• Wax Converters Textiles• Gale Pacific• Ricky Richards
KEY PARTNERS
• Vic Manufacturing Hall of Fame Inductee• 05 Overall Ballarat Business Excellence Award• Multiple Ballarat Business Awards• Multiple Industry association (STA) awards
QUALITY APPROVALS & AWARDS
• Australian Defence Force• Thales• Rheinmetall• General Dynamics
KEY CUSTOMERS
• Proven supplier of a range of different products to ADF• Industry Leader and in operation since 1956• 4 purpose built factories with over 8000sqm of production
floor space• Over 30 welders range from hot air, hot wedge, high frequency
and thermal bar welders• Three computerised cutters and ultrasonic cutter• More than 40 sewing machines ranging from straight stitching
to automated and hemming machines
DISCRIMINATORS• Industrial Textile Product Manufacturing• PVC & Polyethylene products• Canvas Products• Tents & Tarpaulins• Vehicle & Trailer Canopies & Covers• Seat Covers• Storage bags & Equipment Covers• Corrosion Protection Covers
CAPABILITIES
Tim Skewes Commercial Sales DevelopmentBartlett Industrial Textile Product Manufacturing172 Ring Rd, Ballarat, VIC 3355 Tel: + 61 3 5339 3103Email: [email protected]
BARTLETT INDUSTRIAL TEXTILE PRODUCT MANUFACTURINGbartlett.net.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems • •
Avionics / Electrical Systems • •
Design & Engineering •
Information Systems • •
Integration •
Manufacturing / Fabrication / Assembly •
Materials Technology •
Professional Services •
Research & Development •
Safety Systems & Testing • •
• BAE Systems plc (parent company)• Various Global & Australian defence Primes• Various Australian SMEs• Various Australian Universities
KEY PARTNERS
• AS/NZS ISO 9001• AS 9100 (Aerospace Advanced Manufacturing)• CASA PART 145 Maintenance Organisation
QUALITY APPROVALS & AWARDS
• Australian DoD (CASG, DST Group, ADF)• US Navy• Various other US and NATO defence customers• Various commercial airlines
KEY CUSTOMERS• Complete life-cycle capability for aerospace and related
systems, from concept design to production and support• Highly qualified engineers, scientists and technicians
developing leading edge defence & aerospace solutions• Safety critical and Flight certifiable software development
capability• Defence Security and ITAR cleared workforce and facilities• Narrow body aircraft hanger facilities at Tullamarine Airport
DISCRIMINATORS
• A leading provider of total aircraft and mission systems sustainment and upgrade services to the ADF
• The only Australian Guided Weapons systems design, integration and through-life support capability
• World leading autonomy, navigation, guidance and control solutions for Missile and unmanned systems
• Sensor systems development, integration and support
• Advanced manufacturing and hard metal machining for aerospace products
• System simulation and modelling• Project Management, Systems Engineering, ILS and Supply
Chain Management for Complex Programmes• Pilot and aircraft technician training services
CAPABILITIES
Sharon WilsonHead of Industrial StrategyBAE Systems Australia Ltd40 River Blvd, Richmond, VIC 3121Tel: + 61 8 8480 8888Email: [email protected]
BAE SYSTEMS AUSTRALIAwww.baesystems.com/en-aus/home
24
• CNC Swiss Turning Star SV-32• CNC Swiss Turning Star SR20R111• CNC Mill Turning Okuma• CNC Milling Integrated 4 Axis Okuma & Makino
• Low or High Production Runs• CMM Verification• Assembly• Material Analysis
CAPABILITIES
Shayne KellyManaging DirectorBredo Mators Pty Ltd30 Newlands Rd, Reservoir, VIC 3073Tel: + 61 3 9460 3648Email: [email protected]
BREDO MATORS PTY LTDwww.bredomators.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Design & Engineering • •
Manufacturing / Fabrication / Assembly •
Research & Development •
• Deshons• Langa• Indal Technologies• WR Davis Engineering
KEY PARTNERS
• OSI 9001:2015• DRS
QUALITY APPROVALS & AWARDS
• CASG - NASPO, AMSPO, LHDSPO, FFHSPO, MCPSPO.• QANTAS, BOEING, EMIRATES• MELAIR, SACL• NZDF
KEY CUSTOMERS
• Beak has provided CoA vast savings through reduced cost of ownership by managing marine aviation systems for ADF
• Beak’s GPUs are used to power most RAN, RAAF and Army aircraft types in service today.
• Beak has achieved an excellent reputation through the manufacture, supply and support of our GPU’s to Defence
• One of only a few companies in Aust to be awarded 3500 district warehousing and TLS of Defence assets
• 100% Australian-owned and run Defence Industry company with proven performance.
• Fully integrated cost management systems to reduce system through life cost for clients
• Beak provides RAN rapid response field service teams for URDEFs worldwide for their deployed aircraft handlers
• Our facility has a secret clearance classification.
DISCRIMINATORS
• Electrical Design & Engineering specialising in 400Hz and 28.5VDC aircraft ground power
• Systems Engineering Support• Engineering Analysis, concept & development• Integrated logistics support• Marine aviation refueling systems MRO and TLS• Only manufacturer of Australian Ground Power Units - over
350 in service world wide.
• Tarmac Cable handling systems• Marine aviation support systems - VLA, tie-downs, helo
capture systems, 400Hz power, deck lighting.
CAPABILITIES
Phillip ShirleyBusiness Development ManagerBeak Engineering (Aust) Pty Ltd7 Walker St, Braeside, VIC 3195 Tel: + 61 3 9391 1522Email: [email protected]
BEAK ENGINEERING (AUST)www.beak.net.au
• Scientific• Defence• Tooling• Medical
KEY CUSTOMERS
• ISO 9001,AS/NZS401 &14001 Completion 2017
QUALITY APPROVALS & AWARDS
• Thyssen Alloys• Electromold• Bohler Uddeholm• Sandvik
KEY PARTNERS
• A Low Overhead Company offering very competitive services• Advanced CAD/CAM & CNC Machining Technology• An excellent reputation in the industry with a proven track
record as a reliable high quality supplier• 100% Australian Owned and run Engineering Business• An extremely diverse business that looks to take a
collaborative approach.
• Over 45 years of experience in the industry with a vast network of reliable suppliers.
• Full Material Traceability• Whole of life product support
DISCRIMINATORS
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Professional Services •
Research & Development •
25
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Avionics / Electrical Systems •
Design & Engineering •
Integration •
Manufacturing / Fabrication / Assembly • •
Professional Services •
Research & Development • •
Safety Systems & Testing •
• Offsets Services Provider• Global footprint – India, Poland, USA• Long-term partnering agreements• Established global supply chain
KEY PARTNERS
• AS 9100 & ISO 9001• DECO, EU and ITAR compliance• Defence CAGE Code: Z5453• Certification to IPC/WHMA-B-620 and IPC J-ST
QUALITY APPROVALS & AWARDS
• Airbus Helicopters / Airbus Defence & Space• BAE Systems• Boeing• CASG
KEY CUSTOMERS
• Significant experience in developing & building electrical systems for harsh environments
• Strong experience in design for manufacture• Experienced in power, high power, RF & semi ridged cables up
to EHF, shielding and bonding for aircraft• Global exporter with established international supply chain
• Broad knowledge base of international standards• Experienced C4i and systems engineering capability• Commitment to Lean & Continuous improvement
DISCRIMINATORS
• Design assistance for manufacture, parts selection, electrical, mechanical, process and installation
• Project and planning management, configuration management, global supply chain, risk management
• Development and manufacturing of power and RF cable assemblies for aircraft and ground support equipment
• Manufacturing of Avionics wiring racks and consoles• Special process manufacturing – laser marking, RF & semi
rigid cables, harness shielding and electrical bonding• Fully automated test stations, insulation & high pot test
stations & low & high frequency VSWR & Phase testing
CAPABILITIES
Michael ZimmerManaging Director/CEOCablex Pty Ltd236-262 East Boundary Rd, East Bentleigh, VIC 3165Tel: + 61 3 9575 3088Email: [email protected]
CABLEX PTY LTDwww.cablex.com.au
DESIGNER | mark seggie CREATIVE DIRECTOR | alex dukcevic 26.07.13 4CP
Colours
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly • •
Materials Technology • •
• Oerlikon Metco• HC Starck
KEY PARTNERS
• ISO 9001• CASA Part 145• Nadcap/PRI Coatings and Aerospace system• Rolls Royce #103360
QUALITY APPROVALS & AWARDS
• Northrop Grumman• Rolls Royce• Boeing• Hawker Pacific
KEY CUSTOMERS
• Unique Nadcap/PRI qualified HVOF Coatings facility• Comprehensive Thermal Spray Coatings business
complimented by an extensive shop• Combined Civil and Military sustainment services with over 50
years experience
DISCRIMINATORS
• Complete range of Thermal Spray Coating Technologies including HVOF and Plasma Coatings
• Sermetal Sacrificial Coatings• Fibre Diode Laser Cladding Systems - 6Kw and 8Kw• TIG and Plasma Transferred Arc welding systems• Metallurgical Coating analysis• Machining and Grinding
CAPABILITIES
David BrowneCEOBrenco Aerospace Pty Ltd171-173 Fairbairn Rd, Sunshine, VIC 3020Tel: + 61 3 9310 1977Email: [email protected]
BRENCO AEROSPACEwww.brenco.com.au
26
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Research & Development •
• Chemring Group - UK (Parent Company)• Chemring Countermeasures (UK and USA)
KEY PARTNERS
• ISO14001:2004 Environmental Management Systems• AS/NZ 4801:2001 OH&S Management Systems• ISO9001:2008 Quality Management Systems
QUALITY APPROVALS & AWARDS
• CASG• Drew Marine
KEY CUSTOMERS
• Chemring are the only producers of air-launched countermeasures deployed by Australia in the Southern Hemisphere
• Chemring Australia’s facility, is one of the world’s most advanced countermeasures manufacturing plants.
• Facility has the capability to manufacture future ADF requirements including F35 countermeasures
• Chemring Australia, through its sister company supplies land and sea countermeasures
• Chemring Australia is part of the Chemring Group, the world’s largest supplier of advanced countermeasures
• Across the globe more than 2000 people are employed over 20 sites in the US, UK, Europe and Australia.
• More than 100 years experience in energetics and have built a reputation for supplying high quality products.
• We maintain design, development, manufacture, testing, evaluation and support capabilities at Lara, Victoria.
DISCRIMINATORS
• Manufacture of High quality Marine and Military Pyrotechnics that include screening, signaling and illumination.
• Manufacture of Advanced Expendable Countermeasures for protecting air platforms.
• Electronic Warfare and Electronic Attack Technologies.• Supply of innovative route proving and clearance, CBRNE
threat detection, EOD and military demolition solutions.
• Supply of Commercial Lightsticks used by Law Enforcement and Civil Defence
• Offering a range of support, maintenance, R&D, training, test and evaluation services.
• Supply of specialist medium and large calibre ammunition• Repair and maintenance of OEM equipment
CAPABILITIES
Chris IsaacsBusiness Development DirectorChemring Australia230 Staceys Rd, Lara, VIC 3212Tel: + 61 3 5220 8500Email: [email protected]
CHEMRING AUSTRALIAwww.chemring.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Professional Services • •
Research & Development •
Safety Systems & Testing •
• Kamatics• Barden• Kaydon• Greene Tweed
KEY PARTNERS
• ISO 9001:2008
QUALITY APPROVALS & AWARDS
• Goodrich-JSF Weapons Bay/Undercarriage uplock• Rosebank-JSF Weapons Bay/Undercarriage uplock• Supacat-Oilite Bushes• Department of Defence - All Platforms
KEY CUSTOMERS
• Representative for many of the world`s leading manufacturers in our field of expertise
• On shore stock support• Superior product quality, knowledge and service• Tailored solutions with direct OEM technical & engineering
support
• Develop working relationships with customers• Customers have access to the latest innovative designs in
our field.• Many of our suppliers are Tier1 companies to Aerospace &
Defence Primes
DISCRIMINATORS
• High Performance & Precision Components for manufacture maintenance & repair of land, sea, air & space vehicles.
• Supplier of high performance & high precision mechanical & electrical components to Tier 1 Companies
• COTS & Customised Products• Aerospace seals & plastics• Air bearings, precision bearings, bushings/sleeve/journal.
Fiber Optic Connectors. Gearboxes & reducers
• Gears, precision & ground, load cells. Magnetic couplings, brakes & clutches. Rod Ends & Spherical Bearings
• Kamatics Specialty Bearings & Bushings. Bowman-High Performance Bowmet Bushes
• Direct OEM supplier support
CAPABILITIES
Michael LingardNational Business Development ManagerCGB Precision Products Pty LtdUnit 9, 32 Silkwood Rise, Carrum Downs, VIC 3201 Tel: + 61 3 9775 1125Email: [email protected]
CGB PRECISION PRODUCTS PTY LTDwww.cgb.com.au
27
• Materials research, carbon fibre research• Battery technology research and development• Robotics and haptics research, prototyping• Modelling and simulation of complex and uncertain systems• Motion simulator and simulation technologies• Data analytics and decision support• Human movement and sports science, Medical physiology,
Neuroscience, and Exercise and nutrition
DISCRIMINATORS• All our staff have a Trade Background – if we design it you can build it
• All our staff are full time employees (no contractors) ensuring we are always available and will complete the job
• Fully insured with Public Liability and Professional Indemnity Insurance
• Fully licensed software• There when you need us
DISCRIMINATORS
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems •
Design & Engineering •
Information Systems • •
Integration •
Manufacturing / Fabrication / Assembly •
Materials Technology • •
Professional Services • •
Research & Development • •
• General Motors• Ford• General Dynamics• Boeing Australia
KEY PARTNERS
• 2016 Mobility Engineering Excellence Gold Award
QUALITY APPROVALS & AWARDS
• Australian Defence Force, DSTG• Boeing Australia, General Dynamics• General Motors, Ford• ANSTO
KEY CUSTOMERS
• Universal Motion Simulators, motion platforms, flight simulators, land vehicle simulators
• Materials, carbon fibre research and manufacturing, high-strength & lightweight
• Battery technologies, advanced battery prototyping, corrosion and protection technologies,
• Modelling and simulation, system-of-systems modeling, logistics systems, human performance
• Robotics and mechatronics, mobile robotics, autonomous vehicles, energy demand prediction
• Virtual reality and augmented reality, mixed reality, haptics• Tele-operation, tele-manipulation, tele-robotics• Defence mental and physical health, cognitive load
monitoring, psychology, psychiatry, exercise
CAPABILITIES
Professor Saeid NahavandiPro Vice-Chancellor (Defence Technologies)Deakin University75 Pigdons Road, Waurn Ponds, VIC 3216Tel: + 61 3 5227 1231Email: [email protected]
DEAKIN UNIVERSITYwww.deakin.edu.au/research/institutes-and-centres
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
• Dassault Systèmes• Autodesk• A2K Technologies• NC CAD Systems
KEY PARTNERS
• Internally managed and audited QMS• Transitioning to ISO9001:2015
QUALITY APPROVALS & AWARDS
• Marand Precision Engineering• Thales Australia• Chemring• Cablex
KEY CUSTOMERS
• Provide a low risk scalability option for Design and Engineering teams
• 25+ Mechanical and Electrical Designers between SA and Victoria
• Rapidly INTEGRATE into our client’s teams• Work on (or off) our client’s site
• Able to supply key CAD software (Solidworks,• Inventor, AutoCAD, AutoCAD LT)• Have up-to-date hardware for efficient operation
CAPABILITIES
Jonathan BannisterManaging DirectorCornell Design Victoria Pty LtdUnit 12, 3 Westside Ave, Port Melbourne, VIC 3207Tel: + 61 3 9036 3662Email: [email protected]
CORNELL DESIGNwww.cornelldesign.com.au
28
• Defence Science and Technology Group (DST)• Victorian Universities• Defence Materials Technology Centre
KEY PARTNERS
• Australian Department of Defence• Victorian State Government• Over 200 Local SMEs & International Primes
KEY CUSTOMERS• Comprehensive awareness of Australian university capabilities• Direct access to Defence S&T priorities and programs• Funding to support collaboration between industry, Defence
and universities• No interest in IP or royalties• Agile and responsive, with no overheads for engagement
DISCRIMINATORS
• Enhance defence-relevant R&D between universities, industry and Defence
• Identify Defence and National Security Relevant Research and Technology Development opportunities for investment
• Provide our stakeholders with advice on the Defence and National Security R&D Environment
• Connect SMEs to Research & Expertise to strengthen their participation in defence and national security business
• Showcase R&D and Innovation Capabilities in the private & public sectors
CAPABILITIES
Craig ButlerEngagement ManagerDefence Science InstituteL4, 204 Lygon St, Carlton, VIC 3053Tel: + 61 3 8344 3513Email: [email protected]
DEFENCE SCIENCE INSTITUTEwww.defencescienceinstitute.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Materials Technology •
Research & Development •
• Capability Acquisition and Sustainment Group• Defence Science and Technology Group• 15 Research Participants • >40 Industry Partners
KEY PARTNERS
• 2013 Safeguarding Australia Eureka Prize• Continuous Improvement Business Process Award• National Innovation Award - Maritime, Air and Land Defence
Australia Conference• CRC Association Award
QUALITY APPROVALS & AWARDS
• Australian Department of Defence• Capability Acquisition and Sustainment Group• Diggerworks• SEA5000 Program Office
KEY CUSTOMERS• Integrated supply chain approach to technology development
to ensure rapid commercial transition of technology• Involvement of Australian Defence customer in all technology
development projects• Industry-led project structure ensures project teams are
outcome focused• Breadth and depth of materials and manufacturing technology
capability
DISCRIMINATORS
• Foster enduring collaborative relationships between industry, research organisations, industry bodies and Defence
• Support a more competitive and productive Australian defence industry
• Create stronger and more integrated defence supply chains
• Reduce technology development time to market and costs to defence through a collaborative, risk sharing model
• Act to ensure knowledge from Australia’s research sector is diffused into the defence industry through applied R&D
CAPABILITIES
Miles KenyonProgram Development ManagerDefence Materials Technology CentreLevel 2, 24 Wakefield Street, Hawthorn, VIC 3122Tel: +61 3 9214 4447Email: [email protected]
DEFENCE MATERIALS TECHNOLOGY CENTREdmtc.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems •
Avionics / Electrical Systems •
Information Systems •
Materials Technology •
Professional Services •
Research & Development •
29
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Professional Services •
Safety Systems & Testing •• ISO 9001• ISO 14001• Member of AIDN• Member of NZDIA
QUALITY APPROVALS & AWARDS
• Australian Department Of Defence• BAE Systems• Rheinmetall• Supacat
KEY CUSTOMERS
• Worlds largest industrial energy storage company• Over 100 years experience in battery manufacturing• 30% global market share (Over 10,000 customers in 100
countries)• Global manufacturing and distribution capabilities (over 20
ISO-accredited plants)
• Products used by key military and defence forces globally• Industry innovators with focus on new technology
development and investments• Broadest product offering in the marketplace• Local presence and support
DISCRIMINATORS
• EnerSys is the global leader in stored energy solutions.• Extensive product range that serves a variety of aerospace
and defence applications globally.• Key industries served include: Telecoms, Motive-Power, UPS,
Utilities, Renewable/Solar, Aerospace and Defence.
• Leading technologies include: AGM & Gel Type Lead Acid Batteries, Ni-Cad Batteries & Lithium Ion Batteries.
• Leading brands include: ArmaSafe Plus, Hawker, Odyssey, SBS, Genesis, OptiGrid, Purcell Systems, Gaz & Quallion.
CAPABILITIES
Atilla KolikRegional Sales Manager - AsiaEAS (EnerSys Advanced Systems) 309 Settlement Rd, Thomastown, VIC 3074Tel: + 61 3 9645 2440Email: [email protected]
ENERSYS AUSTRALIA PTY LTDwww.enersys.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Professional Services • •
• Schneider, ABB, Omron, Allen Bradley....• Siemens, Calibre Consulting, WNV Systems (UK)
KEY PARTNERS
• Supplier Continuous Improvement Program• Defence Recognised Supplier• Full Traceability and Quality Assurance• ISO 9001 Sub-Contractors
QUALITY APPROVALS & AWARDS
• Boeing Aerostructures Australia• Thales Australia• Asia Pacific Aerospace• Chemring
KEY CUSTOMERS
• Cost effective projects are completed on time and on budget, every time.
• Provide a unique one-stop, single source, fixed price delivery strategy, taking full responsibility.
• We remove the complexity of managing and controlling projects.
• Completing all aspects of the project in-house• Mitigating your risks and eliminating multiple consultants,
equipment suppliers and contractors.
• Proven track record track record in solving manufacturing and process problems.
• Specialise in turnkey multi-disciplined engineering projects with high local content.
• DRYSYS is a diverse design and construct engineering company.
DISCRIMINATORS
• A single source design and construct engineering company, delivering engineered solutions that solve problems.
• Ability to design, construct and integrate sophisticated facilities in live, shutdown or hazardous environments.
• Provide full turnkey paint shops or a range of industrial paint finishing facilities, for all paint coatings.
• Design and construct complex fluid & piping systems, including instrumentation and software.
• Provides innovative turnkey contamination control systems.• Provides a range of electrical design, control, automation and
installation services.
CAPABILITIES
Alan HodgeNational Business Development ManagerDRYSYS Australia Pty LtdL3, 369 Royal Pde, Parkville, VIC 3052Tel: + 61 3 9005 5509Email: [email protected]
DRYSYSdrysys.com.au
30
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Autonomous Systems •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Research & Development •
Safety Systems & Testing • •
• Emerson Spectrex Ltd Defence Vehicle Systems• Fike Inc. - Gaseous Suppression Systems• Akron - Foam Distribution System• Lios - Micro Chip Linear Heat Detection
KEY PARTNERS
• FPT has a Quality In-house Assurance Program• FPT will seek ISO9001-2016 Cert. in 2017/18• FPT’s suppliers are ISO 9001-2008 companies
QUALITY APPROVALS & AWARDS
• BAE Systems for MRAP deliveries• Next-DC Data Halls PROINERT Suppression Systems• Cadbury Schweppes Explosion Suppression System• Vic. Park Tunnel Auckland NZ Linear Detection
KEY CUSTOMERS
• Offices in Melbourne, Sydney, Brisbane, Perth Auckland & Singapore provide rapid support in Australia & Overseas.
• Products approved to highest levels by UL, Factory Mutual, Vds & the Loss Prevention Control Board (LPCB)
• Our design engineers have a combined experience of over 200 years
• Our Product Managers are factory trained by the OEM & can provide timely technical assistance in Australia.
• Proven track record in delivering complex project solutions.
DISCRIMINATORS
• Fire Protection Technologies (FPT) is an Australian owned fire company focusing on Special Hazard Applications
• Design & Supply of Micro Environment Fire Detection and Suppression Systems
• Design & supply of low, intermediate, high pressure & Hybrid Water Mist Systems
• Design & Supply of ProInert, FM200, Novec & Carbon Dioxide Gaseous Fire Suppression Systems
• Supply fire fighting Foam Concentrates, Foam Delivery & Foam Proportioning Systems and Foam Hardware
• Explosion Venting & Pressure Relief, Explosion Suppression Systems & Spark Detection and Extinguishing Systems
• Flame Detection, Video Imaging Detection (VID), Thermal Imaging & Aspirating Smoke & Gas Detection
• Linear Heat Detection Digital, Fibre Optic & Micro Chip & Fire Suppression Control Systems
CAPABILITIES
Peter OwersBusiness Development ManagerFire Protection Technologies Pty Ltd1/251 Ferntree Gully Rd, Mt. Waverley VIC 3149Tel: + 61 3 8542 8911Email: [email protected]
FIRE PROTECTION TECHNOLOGIESwww.fire-protection.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly •
Professional Services •
• ISO 9001• ISO 14001• Boeing, Douglas, Airbus• GECA (Good Environmental Choice) HACCP (Food)
QUALITY APPROVALS & AWARDS
• Thales• Penske• Department of Defence• Hastings Deering
KEY CUSTOMERS
• Recyclable solvent degreasers that reduce disposal costs and chemical inventory requirements
• High Flash Point solvents that reduce health and litigation risks
• Eco-friendly chemicals that protect surfaces and lower replacement costs
• Non Hazardous Surface Cleaners that protect paintwork
• Readily Biodegradable cleaners that enhance system performance and improve effluent quality for discharge
• Low VOC chemicals that prevent toxic offgassing• Non toxic scale removers that limit corrosion and lower
effluent disposal costs• Super concentrated solutions that save storage space
DISCRIMINATORS
• Manufacturer of Eco-friendly Quick Break Detergents and Specialty Chemicals that conform to WHS Guidelines
• Low flammable solvent replacements for MEK, Acetone, Trichloroethane, Toluene and DG chemicals
• Low Odour and Non DG Solvent Degreasers and Brake Cleaners that are suitable for use in confined spaces
• Eco-safe Water Treatment, Scale Removal and Odour Control solutions that reduce waste disposal costs
• Recyclable Parts Washing, Weapon Cleaning and Component Cleaning that minimize waste generation
• Low VOC High Flash Point Surface Preparations, Paint Cleanup and Welding Solvents that remove explosion risk
• Specialty Chemicals for Carbon and Rust removal and Hard Surface maintenance that reduce corrosion
CAPABILITIES
Lorraine JohnsonEnvironmental Fluid Systems Pty Ltd39 Coghlans Rd, Warrnambool, VIC 3280Tel: + 61 3 5564 6455Email: [email protected]
ENVIROFLUIDwww.envirofluid.com
31
• RPAS - Delegated Authority for CASA, Australian Skills Quality Authority Registered Training Org
• Avionic manufacturing for flight data recording/acquisition unmatched in capability in Australia
• Proven track record in maintenance, repair & logistics for the ADF
DISCRIMINATORS
Peggy MacTavishDirector BDFlight Data Systems Pty Ltd31 McGregors Dr, Keilor Park, VIC 3042Tel: + 61 3 8331 2900Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems • •
Avionics / Electrical Systems • •
Design & Engineering • •
Integration • •
Manufacturing / Fabrication / Assembly • •
Materials Technology •
Research & Development • •
Safety Systems & Testing • •
• ISO 9001, PART 145, PART 21
QUALITY APPROVALS & AWARDS
• L3• Airbus• ADF• Hawker
KEY CUSTOMERS
• Avionic Manufacturing• RPAS• Environmental Test Facility• ADF Support Flight Data Systems• ADF Logistics• Test & Measurement Software• Designated Repair Facility (PART 145)
CAPABILITIES
FLIGHT DATA SYSTEMS PTY LTDwww.flightdata.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly • •
Research & Development • •
Kevin HolmesGeneral ManagerFlexible Drive Pty Ltd86 Stubbs Street, Kensington, VIC 3031Tel: + 61 3 9381 9200Email: [email protected]
FLEXIBLE DRIVE PTY LTDwww.flexibledrive.com.auControl systems and replacement parts
• Specialists in control systems and replacement parts incl. complex mechanical cables, wiper systems and mounts.
• OE manufacturer and distributor. Current supplier to Defence Primes.
• We also design and develop new control systems and components and have the expertise to custom design products.
• Our engineering resources include CAD facilities and development and reliability test facilities.
• Extensive machine shop facilities, including CNC turning and assembly to enable us to produce prototypes quickly.
• Our assembly processes embrace technologies of mechanical press work, zinc die casting using director
• We utilise technologies to provide both clarity in operating environments and the ability to act on that feedback
CAPABILITIES
• Thales Australia• BAE Systems Australia• Major OEMs in Aviation, Transport & Marine
KEY CUSTOMERS
• ISO 9001:2008• Defence Recognised Supplier• Competent in PPAP
QUALITY APPROVALS & AWARDS
• Honeywell• LORD• Elliot Manufacturing• RMIT University
KEY PARTNERS
• Over 20 years partnering with Defence Primes for land and sea projects
• Proven track record of successfully delivering solutions to Defence Primes
• Key partnerships with major international Defence suppliers• 70+ years expertise in control systems and replacement parts
DISCRIMINATORS
32
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Materials Technology •
Research & Development •
• Chomarat• Huntsman
KEY PARTNERS
• ISO 9001
QUALITY APPROVALS & AWARDS
• Boeing• Quickstep• Thales• Honda
KEY CUSTOMERS
• Rapid prepreg design and development leading to quicker time to market.
• Lean and flexible prepreg manufacturing leading to ability to supply low volumes in short lead times.
• Established aerospace, defence and automotive supplier.
• Ability to offer multitude of fabric and resin options in low volumes leading to improved performance and creation
• Strong focus on customer outcomes and creating competitive advantage through the application of our highly special
DISCRIMINATORS
• Structural prepreg production• Tooling prepreg production• MRO prepreg solutions• Prepreg and resin system design and development• Distribution of raw materials for the composite industry.• SME in low volume, lean and flexible composites
manufacturing
CAPABILITIES
Sam WellerManaging DirectorGMS Composites Pty. Ltd.42 Redgum Dr, Dandenong South, VIC 3175Tel: + 61 3 9768 2225Email: [email protected]
GMS COMPOSITES PTY. LTD.www.gmscomposites.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Avionics / Electrical Systems •
Design & Engineering •
Information Systems • •
Integration •
Professional Services •
Research & Development •
Safety Systems & Testing •
• ESRI, Pixia, memsql, Carto• AGI Systems Tool Kit (STK)• Nova Systems, GVH Aerospace, Auspace• Planet Satellite Imagery, Spire Satellite AIS
KEY PARTNERS
• Amazon AWS accredited consultants• Certified agile practitioners• Data Vic - Innovative solutions winner 2014
QUALITY APPROVALS & AWARDS
• Dept of Immigration and Border Protection• Defence - DSTG, Navy, AGO, ASD, HQJOC, RPDE• Vic Land, Water, Environment and Planning• Australian Maritime Safety Authority
KEY CUSTOMERS
• Innovative approach in applying best practice ICT principles and tools to problems in the geospatial domain
• Strong advocates of agile development practices to deliver working software
• Vendor neutral and able to offer independent advice• Highly experienced team in the geospatial domain• Parent company (Nova Systems) are an Australian professional
services firm with extensive defence background
• Proven track record building and supporting enterprise geospatial systems in the defence and security sector
• Able to support full ICT project life cycle, through inception, requirements, build, integration and deployment
• Partners with world leading geospatial technology and data providers
DISCRIMINATORS
• Enterprise geospatial consulting services• Design, development and support of mapping applications on
web, mobile and desktop platforms• Deployment of geospatial applications to cloud platforms,
including Amazon Web Services and Microsoft Azure• Geospatial visualisation, analysis, data management and
reporting• Business analysis and enterprise system architecture
• Integration and development of emergency incident management and situational awareness capabilities
• Raster imagery management and publication• Geospatial data capture using small satellites
CAPABILITIES
Matthew LangleyOperations ManagerGeoplex Pty LtdLevel 2, 27 Hardware Lane, Melbourne, VIC 3000Tel: + 61 (0) 419 218 814Email: [email protected]
GEOPLEXwww.geoplex.com.au
•
33
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering • •
Manufacturing / Fabrication / Assembly • •
• Wallenius Wilhelmsen Logistics• Member of AIDN• Lloyd’s Register• Global Welding Technologies
KEY PARTNERS
• ISO 9001:2008 SAI Global• VWA Health & Safety Innovation Award Finalist• Welding Certifications and Accreditations
QUALITY APPROVALS & AWARDS
• Virgin Airlines• Toyota Motor Corporation Company Australia• SEM Fire & Rescue• Defence
KEY CUSTOMERS
• 40 Years experience in the design and manufacture of fabricated products
• In House Concept, Design and Prototype Development Engineers
• Experts in the development of Engineered Logistics and MHE Solutions
• Design, Manufacture and Installation of Stainless Steel Processing Equipment
• ISO 9001:2008 Accredited• Patented Aircraft Wheel & Brake Handling System• GSE designers• ISO Container Testing Capabilities
DISCRIMINATORS
• Laser Cutting - 20mm Mild Steel, 18mm Stainless Steel• Water Jet Cutting - wide range of difficult to cut materials• - Ballistic Glass, Toughened & Hardened Steel• CNC Turret Punch - 5mm Mild Steel, 3mm Stainless Steel -
Auto Load & Unload• Light - Heavy Fabrication - Mild Steel, Stainless Steel, Special
Steels
• Sheet Metal Fabrication - Folding, Processing, Finishing, Assembly
• Product Concept & Design - FEA Testing• ISO Container Re-Configuration and ISO Frame Design &
Fabrication• Stainless Steel Fabrication and Installation
CAPABILITIES
Trevor PedwellGeneral ManagerGroundmaster Engineering Pty Ltd67 Calarco Dr, Derrimut, VIC 3030Tel: + 61 3 9394 0800Email: [email protected]
GROUNDMASTER ENGINEERING PTY LTDwww.groundmaster.com.au
GPSAT SYSTEMS AUSTRALIA PTY LTDwww.gpsatsys.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems •
Design & Engineering • •
Professional Services •
Research & Development • •
• NovAtel Inc. Canada• Spirent Communications UK• DST GROUP; Australian Research Council (ARC)• UniNSW; UniAdel; QUT; GD-Nz
KEY PARTNERS
• ARC Industry Linkage Projects 2009 & 2014• DST Group Capability Tech Demo Project 2014• Australian Coal Research Project 2015
QUALITY APPROVALS & AWARDS
• DST GROUP; CASG, RAN, RAAF & ARMY• CSIRO; UNSW; UniAdelaide; QUT; ACFR• DFAT; Airservices; Geoscience Aust; AIS• BAE; Thales; Boeing Insitu; Textron
KEY CUSTOMERS
• GPSat Systems delivering complex navigations systems to Australian Defence and Aerospace Industry since 1993
• Professional team of Electrical, Electronic, Geomatic, Engineers, plus Computer and Spatial Scientists
• Leading technology for locating RFI and spoofing affecting mission critical GPS-dependant systems
• Extensive GPS/GNSS laboratory test & simulation capability including laboratory equipment and technical expertise
• Experts in Precision Vehicle 3D body Motion & Orientation (6 degrees of freedom) navigation & spatial interaction
• Experts in software development for C++ embedded systems, FPGA VHDL programming and electronic PCB design
• Expert support for NovAtel precision GPS/GNS navigation SAASM and Anti-Jam (GAJT) Antennas for military platforms
• Expert support for Spirent GPS and IMU laboratory RF simulation equipment for military platform testing
DISCRIMINATORS
• Specialist Satellite Navigation (GPS / GNSS) Systems Engineering company. Australian owned and based in Melbourne
• GRIFFIN - leading technology in detection & geo-localisation of any jamming & spoofing interference of GPS signals
• GBAS Multi-Mode Receiver (GMMR) real-time static or dynamic monitoring of GBAS performance (accuracy/integrity)
• Multi Element Electronically Steerable Phased Antenna Array optimised to detect very weak signals
• Threats processed, CW, WBN, NBN, SweptCW, PulsedCW, Chirp Tones and/or any combination, 30MHz bandwidth
• ANZ distributor for Spirent GPS/GNSS and IMU laboratory RF simulation equipment for military platform testing
• ANZ distributor for NovAtel precision GPS navigation SAASM and Anti-Jam (GAJT) Antennas for military platforms
• Test Measurement & Analysis Services, experience and elite resources to add significant value to any ITS project
CAPABILITIES
Graeme HooperManaging DirectorGPSat Systems Australia Pty Ltd1/22 Aberdeen Rd, Macleod, VIC 3085Tel: + 61 3 9455 0041Email: [email protected]
34
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Autonomous Systems • •
Avionics / Electrical Systems • •
Design & Engineering • •
Manufacturing / Fabrication / Assembly • •
• Thyssen Krupp• Collins Anodic• Valbruna Australia• Danco Anodizing
KEY PARTNERS
• AS9100C• ISO 9001:2008• I.T.A.R. Compliant
QUALITY APPROVALS & AWARDS
• Aerospace - Local - JSF & Export• Defence - Local - ARMTSPO & Export,• Life Sciences• Mining
KEY CUSTOMERS
• Over 40 years of experience in the Advanced Manufacturing field.
• 100% reliability for fail-safe components which underpin mission-critical activities.
• 100% Australian owned family company with local manufacturing facility.
• Lean manufacturing processes.• In-house technical development program to ensure continual
up-skilling of staff• ‘Outside-in’ collaborative approach to project management.
DISCRIMINATORS
• Advanced manufacturing of Aerospace spec on-board electrical connectors
• Interconnecting Rack and Panel Housings• Black-box Fittings• Aircraft circuitry enclosures• Avionics systems components
• Precision and Repetition Engineering• Engineering Development and manufacturing• First Article Inspection Reports to AS9102, PPAP’s, FMEA, PCP
in process inspection
CAPABILITIES
Sawan NairNational Business Development ManagerHargo Engineering Pty Ltd103-115 Merrindale Dr, Croydon, VIC 3136Tel: + 61 3 9761 5110Email: [email protected]
HARGO ENGINEERING PTY. LTD.www.hargo.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly •
• Siemens
KEY PARTNERS
• Vic. 2016 Manufacturer of the Year Award• Boeing approved supplier
QUALITY APPROVALS & AWARDS
• Boeing• Marand• Hofmann• DVR
KEY CUSTOMERS
• Many years expertise in providing five axes gantry Precision Milling Machines (PMM) to aerospace customers
• High level of vertical integration, i.e. in-house manufacturing of milling heads and spindles
• All PMM have no mechanical transmission but use linear motors instead
• Five axes PMM with very high volumetric accuracy• Solutions to customer requirements• PMM certified to inspect components by leading aircraft
manufacturer
DISCRIMINATORS
H & H MACHINE TOOLSwww.h-h.com.au
• 5-axis Gantry Milling Machines• Design and manufacturing of five axes machine tools for
milling, mill-turn (multiplex-machines), trimming and drilling • Design in house with advanced Computer Aided Design/
Machining (CAD/CAM) & Engineering Analysis (FEA) • Complete turnkey project delivery for Trim and Drill systems • Custom design based on customer requirement
CAPABILITIES
Bernard ReganSalesH & H Machine Tools Australia Pty Ltd45 Fordson Rd, Campbellfield, VIC 3061Tel: + 61 3 9357 2368Email: [email protected]
35
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Autonomous Systems •
Avionics / Electrical Systems •
Information Systems •
Integration •
Materials Technology •
Safety Systems & Testing •
• ASSA ABLOY Lock systems• Form 2000 sheet metal• SOCOBELL• LEXAN
KEY PARTNERS
• COTS 2008, MOTS 2011 Defence Approved Supplier• NATO (NCAGE) CODE ‘Z0MY0’• DMO LoRS certification• AS/NZS ISO9001:2008
QUALITY APPROVALS & AWARDS
• DOD, MBAuP and RMMVA - LAND 121, Thales.• Australia Border Force.• Australian Federal Police & State Police.• Justice department.
KEY CUSTOMERS
• Global Leader in Security Portability with a proven track record with Defence, Corporate & Government Departments.
• Australian owned family business established for over 25 years.
• SCEC endorsed 2005-2014 to Top Secret for Data Protection. Used by Hand, In Transit, locked down OR all three.
• One Hide Away Safe - Relocatable in seconds into multiple (Docking Stations) secure locations.
• Can be used as a ‘stand alone safe’ or a much larger integrated & customised ‘mobile/static security system’.
• Can be secured by a variety of armor plated lock systems.• 15 year guarantee with minimal ‘Through Life Cost’• 100% Australian Owned SME offering buyer anonymity and a
high level of personalised service.
DISCRIMINATORS
• Integration capability from existing LAND121 phases into any Aerospace requirement.
• Globally unique - High Security, Light Weight, Relocatable Safes/Comsec Enclosures.
• Made from super strong liquid injected LEXAN Military grade Polycarbonate.
• Two sizes & in various internal configurations to suit clients requirements.
• Large range of fixing kits & accessories.• Capacity to manufacture100 of the large COMSEC box’s per
month or 400 small COMSEC box’s.• Custom DIY or in house installation available.
CAPABILITIES
David JacksonCEOHide Away Safe Securities Pty Ltd240 Stamps Lane, Wangaratta, VIC 3678Tel: + 61 3 5721 9040Email: [email protected]
HIDE AWAY SAFE COwww.hideawaysafe.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly •
Materials Technology •
• Henkel AG & Company, KGaA• KLX Aerospace Solutions• Aerospace Materials• Ecoclean Avanti Chemical
KEY PARTNERS
• ISO 9001• ISO/TS 16949• ISO/ 14001
QUALITY APPROVALS & AWARDS
• Boeing, Airbus, Lockheed Martin Northrop• Northrop Grumman, Bombardier, Bell• Dept. of Defence - Local and Global• Qantas, Quickstep, BAE Systems, Thales
KEY CUSTOMERS• A global company with operations in over 100 countries
around the world• Local manufacturing of surface treatment and cleaner
chemicals• Extensive distribution network around Australia and the world• Local and global technical support
DISCRIMINATORS
• Global brands: Loctite, Hysol, Bonderite and Turco• Market leader in adhesives and sealants technology in OEM
& MRO• Manufacture and supply the largest range of Surface
Treatment and Cleaners Chemical
CAPABILITIES
Son PhamBusiness Manager - AviationHenkel Australia Pty. Ltd.135-141 Canterbury Rd, Kilsyth, VIC 3137Tel: + 61 3 9724 6314Email: [email protected]
HENKEL AUSTRALIA PTY. LTD.www.henkel.com
36
• ITAR compliant site• Many process’ are approved by Primes such as Lockheed
Martin and Boeing• 3rd party process accreditation by Nadcap for Heat Treating.• Online job tracking capability• Many years of experience working in the Aerospace and
Defence sectors working on programs such as JSF F35.• Heat Track – HTA Trademarked Customer Information Portal
DISCRIMINATORS
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly •
Materials Technology •
• AS9100 Certified• Nadcap Accredited Heat Treating• Boeing• Lockheed Martin
QUALITY APPROVALS & AWARDS
• Airbus Group Asia Pacific• Amaero Additive Manufacturing• Lovitt Technologies• Marand
KEY CUSTOMERS
• Heat Treat special processing of stainless PH steels to H conditions IAW customer and industry specifications
• Heat Treat special processing of Aluminum Alloys to T conditions IAW customer and industry specifications
• Verification of heat treatment processes by Rockwell Hardness Testing and Electrical Conductivity Testing
CAPABILITIES
Ian BowdenHTA Aerospace & Defense Pty Ltd40B Capital Link Dr, Campbellfield, VIC 3061Tel: + 61 3 8359 7500Email: [email protected]
HTA AEROSPACE & DEFENSEhta-global.com
HOFMANN ENGINEERING PTY LTDwww.hofmannengineering.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly • •
• Hofmann Engineering Bassendean Perth WA
KEY PARTNERS
• AS/NSZ ISO 9001: 2008• AS 9100 C
QUALITY APPROVALS & AWARDS
• Boeing Aerostructures Australia Pty Ltd• BAE Systems• ACS PTY LTD• Quickstep
KEY CUSTOMERS
• Approved supplier to BAES (UK) for over 10 years on the F135 program for Tooling
• Approved supplier to Boeing Aerostructures Australia for 20+ years on various Boeing programs
• Largest privately owned Engineering Company in Australia, with locations in Perth, Bendigo & Newcastle
• One stop shop for the design and manufacture of aerospace tooling
• ITAR compliant
DISCRIMINATORS
• Our full turnkey tooling service incorporates• Engineering design,.Manufacture, Fabrication, Assembly• Machining of exotic materials including Titanium, Inconel,
Invar36 and Aluminium alloys• Large 5axis CNC machining capacity 18m x 4m x 1.7m• High precision 5 axis machining 8m x 4m x 1.6m 24000rpm• Welding specialist of exotic materials including Inconel,
Invar36 and Aluminium alloys
• Inspection capability utilizing CMM to 3m x 2m x 1m envelope • In-house and On-site Laser tracker inspection of large
assemblies, jigs and fixtures.• Heat treatment (stress relieving) ovens to 12m
CAPABILITIES
Theo LemonidisGeneral ManagerHofmann Engineering Pty Ltd292 Bay Rd, Cheltenham, VIC 3192Tel: + 61 3 8585 1800Email: [email protected]
37
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly • •
Professional Services • •
• Largest and most comprehensive stock holding in Australia• Nationwide delivery• Materials can be ordered to customer specific specifications• Supply chain management of raw materials for the full term
of the project• Australia’s most experienced Special Steels team
DISCRIMINATORS
• Major Australian steel stockist & distributor• Global sourcing of Engineering Steels & Alloys• Australia wide - Just In Time delivery• Raw material supply chain management• Aluminium, Titanium, High Tensile Steel, Stainless Steel,
Bronze, Hydraulic Tube and Rod, Tooling & Carbon Steels
• Full mill certification for all steel supplied Certification to EN10204 3.1
• High speed saw capability for tighter tolerance, less waste and faster supply of cut to length steel
• Australian owned and operated since 1987
CAPABILITIES
Brad HowardNational Sales ManagerInterlloy Pty Ltd96-108 Bangholme Rd, Dandenong South, VIC 3164Tel: + 61 3 8791 9649Email: [email protected]
INTERLLOY PTY LTDwww.interlloy.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Manufacturing / Fabrication / Assembly • •
Professional Services •
Research & Development •
• Ironside Defence and Mining• Design Synergy
KEY PARTNERS
• ISO 9001 Quality Assurance in practice• Vic Man Hall of Fame Business of the Year 2013• Lifetime Achievement Awards 2011 - 2014• MM Most Innovative Manufacturer 2012
QUALITY APPROVALS & AWARDS
• Defence and emergency response vehicles• Public transport infrastructure• IT & electrical enclosures and infrastructure• Commuter information systems and signage
KEY CUSTOMERS
• Award Winning Enterprise• Agile, Progressive and Revolutionary business culture and
product outcomes• 25 years experience delivering fully integrated product
solutions• 100% Australian owned family business
• We empower our clients through design• We empower our clients through execution• We have deep knowledge, insights and experience• Innovation is in our blood
DISCRIMINATORS
• Product Design Engineering, including Industrial Design and Mechanical Engineering - Concept to Prototyping
• Design for Manufacture (DFM), design for easy deployment, design for sustainability, design for reduced on-costs.
• Prototyping - Rapid prototyping, 3D printing, applied manufacturing prototyping
• Project Management of carefully selected local and global suppliers for complete solutions
• Flexible and agile light metal in-house manufacturing facility• Punching, laser cutting, servo electric bending, notching,
fastening, welding, powdercoating and assembly• Delivery of fully integrated solutions to ‘Make Your Vision Real’
CAPABILITIES
Paul HughesManaging DirectorIntegra Systems Pty Ltd197 Northcorp Blvd, Broadmeadows, VIC 3047Tel: + 61 3 9359 3133Email: [email protected]
INTEGRA SYSTEMSwww.integrasystems.com.au
38
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems • •
Avionics / Electrical Systems • •
Design & Engineering • •
Information Systems • •
Integration • •
Materials Technology •
Professional Services • •
Research & Development • •• Dassault Systemes• MSX International
KEY PARTNERS
• ISO 9001:2016• Defence Restricted Network (DRN)• Dassault Systemes Solutions Partner• Dassault Systemes Certified Education Partner
QUALITY APPROVALS & AWARDS
• Boeing• Northrop Grumman• CASG and DSTG• Rheinmetall Defence
KEY CUSTOMERS
• Market leader in configuration management, system integration for Defence
• Market leader in IP control, ITAR data management, program & certification management for Defence
• supplier to DOD for 15+ years, Defence Restricted Network (DRN)
• 20+ years Preferred Supplier to leading Aerospace & Automotive companies
• Provider of proven Dassault Systemes technology used by US Army, Defence Korea, France SWAT and NASA
DISCRIMINATORS
• Dassault Systemes 3DEXPERIENCE Platform technology provider : 3D design, engineering, data & process management
• Configuration management• Requirements capture, program management & technical
through life support for fleet sustainment• IP & ITAR data management• Quality & compliance
• Certified training for CATIA & ENOVIA• Specialised technical recruitment : Contractor management,
permanent staff & executive search• In-house & on-site engineering design support services :
Styling, CAD modeling, GD&T, CAE, FEA, FEM CFD analysis
CAPABILITIES
Ivan MeiselChief Executive OfficerInvenio Pty. Ltd.L4, 37-41 Prospect St, Box Hill, VIC 3128Tel: + 61 3 9896 8888Email: [email protected]
INVENIOwww.invenio.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Manufacturing / Fabrication / Assembly •
Materials Technology •
• NYCO S.A. (France)• Penrite Oil (Australia)
KEY PARTNERS
• ISO9001:2015
QUALITY APPROVALS & AWARDS
• Australian Department of Defence• Australian Border Force• Royal Flying Doctor Service• Cobham Aviation Services
KEY CUSTOMERS• Partnered with NYCO, the world leader in defence aviation with
over 50 years’ experience• More than 15 years’ experience in supplying Australian Air
Force, Army and Navy requirements• Australian Defence Recognised Supplier• Broad flexibility with order quantities and pack sizes• Australia-wide distribution network for any pack size
DISCRIMINATORS
• Specialty distributor of aviation lubricants and greases• Products available to military specification (NATO• - US, British, French; Russian)• Wide range of approvals for civil aviation engines and
airframes
CAPABILITIES
David SewellDirectorInterchem Pty Ltd20 Harper St, Abbotsford, VIC 3067Tel: + 61 3 9270 9600Email: [email protected]
INTERCHEM PTY LTDwww.interchem.com.au
39
• Proven track record supporting complex defence programs leveraging over 1,100 cleared consultants.
• Experienced engineers and scientists with relevant industry experience.
• Global network with 174,000 people across 155 countries.• Australia’s premier R&D Incentives and grants practice.
DISCRIMINATORS
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems • •
Manufacturing / Fabrication / Assembly • •
Safety Systems & Testing • •
• UTC Aerospace Systems• Kidde Technologies Inc.
KEY PARTNERS
• ISO 9001• CASA/CAAS & EASA145• DGTA (DASR 145)• US DoT
QUALITY APPROVALS & AWARDS
• ADF• NZDF• Thales Australia• Airbus Group Australia Pacific
KEY CUSTOMERS• Kidde product fitted to 90% of the ADF’s Aerospace Platforms
and 100% of Land Platforms• Hold all required approvals and licensesfor the import/ export
and domestic use of scheduled extinguishing agents• US Export Controls compliant, on site International Trade
Compliance Focal.• Experienced Dangerous Goods Manager
DISCRIMINATORS
• Product Support, Spares Distribution and MRO activities for Fire Protection Systems fitted to Aircraft.
• Product Support, Spares Distribution and MRO activities for Fire Protection Systems fitted to Ground Vehicles
• Product Support, Spares Distribution and MRO activities for Life Rafts, Aerospace & Maritim e.
• Product Support, Spares Distribution and RIM activities for UTAS Products & Equipment.
• Management and Control of scheduled Extinguishing Agents ie. Halon.
CAPABILITIES
Ray WaltonGeneral ManagerKidde Aerospace & Defence Pty LtdUnit 2, 13/14 National Dr, Hallam, VIC 3803Tel: + 61 3 9709 3601Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Information Systems •
Professional Services •
Research & Development •
• Vanguard Leader in Procurement 2015• Top 50 Providers to Know – 2014 and 2015• Management Consultant of the year 2016
QUALITY APPROVALS & AWARDS
• All parts of Defence and Defence Industry• Able to work within an ITAR/TAA environment
KEY CUSTOMERS
• Financial management, costing, budgeting and reporting services.
• Assessing and accessing R&D tax incentives and grants.• Technology advisory involving strategy and governance,
security and controls and project assurance and support.• Business reform support covering planning, developing,
executing and reporting on major transformation initiatives
• Project lifecycle support including proposal development support and independent review.
• Export market development and Foreign Direct Investment strategy and due diligence.
• Business advice including strategy and business case production, business process improvement.
• Specialist SME and family business advisory services.
CAPABILITIES
Mike KalmsDefence Industry Lead PartnerTower Two, 727 Collins St, Melbourne, VIC 3008Tel: + 61 3 9288 5555Email: [email protected]
KPMGwww.kpmg.com.au
KIDDE AEROSPACE & DEFENCE PTY LTDwww.utcaersospacesystems.com
40
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Avionics / Electrical Systems • •
Design & Engineering • •
Information Systems • •
Integration • •
Manufacturing / Fabrication / Assembly • •
Materials Technology • •
Professional Services • •
Research & Development • •
Safety Systems & Testing • •
• Australian Department of Defence• United States Department of Defense
KEY CUSTOMERS• Reach back to vast company capabilities in the USA.• Extensive experience in complex systems integration.• Highly reliable and trusted partner.
DISCRIMINATORS
• Aerospace Systems delivers integrated solutions for the global ISR market.
• Provides modernisation, upgrade, sustainment, & maintenance and logistics support for a wide variety of aircraft.
• Airborne and Ground-Based ISR Systems;• Networked ISR Communications;
• Multi-Mission Aircraft Systems Development;• Life Cycle and Logistics Support;• Aerospace and Flight Sciences Engineering;• Aircraft Systems Integration and Modification, Aerostructure
Fabrication and Assembly.
CAPABILITIES
Andrew PetersenManaging DirectorL-3 Communications Australia Pty LtdUnit 12, 75 Lorimer St, South Wharf, VIC 3006Tel: + 61 3 8645 2405Email: [email protected]
L-3 COMMUNICATIONS AUSTRALIAwww.L-3com.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Autonomous Systems • •
Avionics / Electrical Systems • •
Design & Engineering •
Integration • •
Professional Services •
Research & Development • •
• Fincantieri / OSN (Italian FREMM Project) • DRS Canada (Part of Leonardo-Finmeccanica Group) • WASS (Part of Leonardo-Finmeccanica Group) • RF Products & Rockwell Collins (ANZAC Comms)
KEY PARTNERS
• ISO 9001 • ISO 14001 • DISP
QUALITY APPROVALS & AWARDS
• Australian Defence Force • United Kingdom Ministry of Defence • Ministero Della Difesa (Italy)
KEY CUSTOMERS
• Part of the Leonardo-Finmeccanica group of Companies • Leonardo global reach for Solutions and Supply Chain• Staff cleared to “Australian Secret” • Full Member of the Defence Industrial Security Program (DISP) • Melbourne Facility is certified to hold and produce material up
to “Australian Secret”
• Procurement Capability using SC21 Standards • Access to Defence Restricted Network (DRN) and Defence
Stores • Provider of Communications Upgrade for ANZAC Frigates
DISCRIMINATORS
• Systems Engineering including design, development & integration
• Complex Project/ Program Management & ILS • An International supplier of Electronic & Information
Technologies for Defence Systems • Sub-Contract Management
• Fully Integrated Communication Systems (FICS) and Subsystems Combat Management Systems (CMS)
• Earned Value Management • Support & Repair Facilities• Avionics Maintenance Repair and Overhaul
CAPABILITIES
Julian DayVP Regional Sales & Business Development19 Rocklea Dr, Port Melbourne, VIC 3207 Tel: + 61 3 9698 0400Email: [email protected]
LEONARDOleonardocompany.com.au
41
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Design & Engineering •
Professional Services •
• Nova Systems• Cubic• IDES
KEY PARTNERS
• AS/NZS 9001:2008
QUALITY APPROVALS & AWARDS
• BAE Systems Australia, Department of Defence• Lockheed Martin Australia, Marshall Aerospace• Australian Aerospace• Sikorsky Helitech
KEY CUSTOMERS
• Developed and deployed eMRD, eLORA, eLSA software suite Improved efficiencies DEFAUST 5692 Iss 2 compliant
• First choice provider to defence for Weapon System Data base and ADAASS support
• Continuity of service delivery• Transparency and reliability of service
• 97% first time delivery of product• Unparalleled knowledge of Australian relevant standards• Depth of experience and expertise across defence platforms• Excellent quality and value for money
DISCRIMINATORS
• Integrated Logistic Support (ILS)• Logistic Support Analysis (LSA) and Logistic Support Analysis
Record (LSAR) Development• In-house designed, built and marketed software tool sets to
support ILS outcomes such as eMRD and eLORA• ADAASS SME capability
• Technical Spares Assessing/Inventory Management• Technical Authoring (AAP, ABR, CES, RPIL, UHB, ILSI, ILSP)• Engineering Analysis for Maintenance Requirements• Life Cycle Costing (LCC) and Level of Repair Analysis (LORA)
CAPABILITIES
Warren SmithBusiness Development ManagerLogistic Engineering Services Pty LtdLevel 1, 7 Westside Ave, Port Melbourne, VIC 3207Tel: + 61 (0) 478 118 570Email: [email protected]
LOGISTIC ENGINEERING SERVICESwww.les.net.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Materials Technology •
Research & Development •
• AS ISO 17025• NATA Accredited labs in Melbourne, Syd• BAE UK approved for Titanium IGA & NDT• Aust. Institute for NDT . Director, ICNDT & AP
QUALITY APPROVALS & AWARDS
• BAE Systems Williamstown & Bandiana VIC- Commo• BAE Systems Aust. Defence Edinburgh SA• Australian Submarine Corporation SA - Osborn• Origin energy
KEY CUSTOMERS• Single point of contact for Comprehensive range of tests• Australia wide coverage for on-site testing• Advanced NDT Services - PEC, ECA, PAUT, TOFD• Sealants, adhesives, gels, polymer tests• Material Eng. & Ad. NDT combined Services• Multi skilled and cross skilled staff• Quickest Online reporting to save client’s time
DISCRIMINATORS
• One stop source for Asset Life Extension• Metallurgical, Mechanical & Corrosion testing• Failure investigations• Chemical analysis & PMI• Advanced & conventional Non-Destructive Testing (NDT)• Third party Inspection & Pressure vessel Inspection• Hydro-static pressure testing• WPS & PQR Development & verification
CAPABILITIES
George FarahBusiness Relations Manager - VICLMATS Pty Ltd6 Techno Park Dr, Williamstown, VIC 3016Tel: + 61 (0) 478 353 719Email: [email protected]
LMATS PTY LTDwww.lmats.com.au
42
• Proven track record in machining, processing and assembly complex components for defence industries.
DISCRIMINATORS
• CNC Machining of complex components in Aluminum, Steel and Titanium up to 3,000mm.
CAPABILITIES
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly • •
• Castle metals• TMX• Electomold (owned by LTA)
KEY PARTNERS
• AS 9100
QUALITY APPROVALS & AWARDS
• Boeing F18,F15,V22,P8,CH47, LM F35, NG F35
KEY CUSTOMERS
Bruce RamsayManufacturing Director George Lovitt (Manufacturing) Pty Ltd207 Para Rd, Montmorency, VIC 3094Tel: + 61 3 9431 7335Email: [email protected]
LOVITT TECHNOLOGIES AUSTRALIAwww.lovittech.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Professional Services •
• Rheinmetall Technical Publications GmBH• Rheinmetall Technical Publications UK• PAC Group• Translationz
KEY PARTNERS
• LSA is accredited to AS/NZS ISO 9001:2008
QUALITY APPROVALS & AWARDS
• Rheinmetall MAN Military Vehicles• Australian Aerospace• Tectonica• Department of Defence CASG
KEY CUSTOMERS
• We speak Defence• LSA’s staff have a detailed understanding of the Defence
environment• The vast majority of the workforce have served in the military
and are technically qualified.• Understand the importance of Configuration Management in
the aerospace environment
• Experienced in ILS and Technical Documentation including AAP’s and DMS.
• Experienced in partnering and providing support to Prime contractors in acquisition and through life support
• LSA has provided support to over 60 major and minor projects resulting in over 250 individual support contracts
DISCRIMINATORS
• LSA’s core business is to support technical equipment and systems through all phases of the life cycle
• We do this by providing professional and qualified practitioners• ILS and optimizing support systems are core areas of LSA
expertise• We have extensive practical experience in carrying out
Logistic Support Analysis and RAM modeling• Skilled technical practitioners to carry out technical writing,
authoring, illustration and publication services
• LSA offers a turn-key solution for the production of technical documents
• LSA is experienced in the use of Engineering/Logistic tools such as: OPUS 10, OMEGA PS, VMETRIC, CASA and EDCAS
• LSA is experienced in Logistic Information Systems such as MILIS, FEDLOG, CAMM2, SLIMS, AMPS, NMCRL and CENCAT
CAPABILITIES
Kenneth HoppeManaging DirectorLogistic Solutions AustralasiaSuite 3, Level 1, 66 Albert Rd, South Melbourne, VIC 3205Tel: + 61 3 9682 3098Email: [email protected]
LOGISTIC SOLUTIONS AUSTRALASIAwww.lsaust.com.au
43
• AS/EN 9100C / ISO 9001, ISO 14001, ISO/IEC 170 • 2014 - CIPS international procurement project of the year • 2014 - BAE UK- MAI procurement award best relationships
award • 2014 Manufacturers monthly Endeavour award - Manufacturer
of the year
QUALITY APPROVALS & AWARDS
• Lockheed Martin (Source Acceptance Approval) • BAE Systems (Source Acceptance Approval) • Boeing • CEA Technologies
KEY CUSTOMERS
• Australia’s largest proven and trusted Aerospace Tooling, Automation, Robotics, and Systems Integrator
• Designer and sole source manufacturer of the JSF F-35 Engine Removal and Installation Trailer
• Strategic second source for the Joint Strike Fighter Vertical tail production
• Largest Australian manufacturing supplier on F-35 program • Ability to successfully manage large and diverse supplychains
on complex Defence projects
• Awarded for success in completing complex technical transfer on Defence programs
• Highly successful critical path Tier 1 tooling and facility supplier on international programs
• Proven ‘Best Value’ solutions provider to international and local aerospace, defence & rail industries
DISCRIMINATORS
• Australian partner to Global Primes• Manufacture, Assembly and Sustainment of Complex Defence
Products (Aerostructures, GSE)• Design and Manufacture of Aerospace Turn Key production
facilities.
• Design and Manufacture of Lay-up and assembly tooling for all metallic and carbon fibre composite assemblies
• Liquid moulding tooling, resin injection and infusion systems• Highly efficient DC Electric motors/generators
CAPABILITIES
Alex LyonBusiness Development ManagerMarand153 Keys Road, Moorabbin, VIC 3189Tel: + 61 3 8552 0600Email: [email protected]
MARANDwww.marand.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems •
Design & Engineering • •
Integration •
Manufacturing / Fabrication / Assembly • •
Materials Technology •
Professional Services •
Research & Development •
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Avionics / Electrical Systems •
Design & Engineering •
Integration •
Manufacturing / Fabrication / Assembly • •
Materials Technology •
Professional Services •
Research & Development •
• Defence Science and Technology Group.• ASC: Technical Support Agency (TSA)• Taica (Alpha GEL Products)• Leap Australia
KEY PARTNERS
• AS/NZS ISO9001:2008• ISO/IEC 17025:2005 (NATA approved Laboratory)• AS/NZS ISO14001:2004
QUALITY APPROVALS & AWARDS
• BAE Systems (US): ESSM Mk25.• BAE Systems (Aus): ESSM & Nulka.• Australian Submarine Corporation (ASC).• ASC: AWD, various rubber products.
KEY CUSTOMERS
• Technical Services: a key solution provider encompassing: mathematical modelling and product development.
• Expertise in rubber compound development, tailored to specific applications.
• Trusted partner of the Defence Science and Technology Group (DST Group) developing enhanced products.
• Management and protection of IP (customer and Mackay).• DISP accredited and ITAR compliant with approved secure
manufacturing facility.
• Unique materials from globally sourced suppliers e.g. aeronautical grade materials: ablatives, pre-preg & adhesive
• Advanced manufacturing and assembly in environmentally controlled facility with a NATA certified laboratory.
• Experienced Exporter: USA, Singapore, Middle East, China, New Zealand and Europe.
DISCRIMINATORS
• Process types: Extrusion, Compression, and Injection Moulding.
• Custom fabrication with autoclave facilities (up to Ø1.8 x 6 metre).
• Moulding press capacity ranging up to 1,000 tonne, capable of producing parts 2.4 x 1.5 metre.
• Specialist hand build competency and off-site secure fitments.• In-house material formulation development, mixing and
compounding.• Utilising aeronautical processes and documentation
CAPABILITIES
Samuel HinesAccount Manager - Defence/IndustrialMackay Consolidated Industries260 Chesterville Rd, Moorabbin, VIC 3189Tel: + 61 3 9276 4653Email: [email protected]
MACKAY DEFENCEwww.mackayrubber.com.au
44
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Information Systems • •
Integration •
Professional Services •
• Aras Corporation- Innovator PLM software• Blue Cielo - Meridian ECM/EIM software• Matrix Applied Computing Ltd NZ. CAE services
KEY PARTNERS
• Cubic Defence• Defence Technology Agency• NZ Defence Force• Northrop Grumman
KEY CUSTOMERS
• Proven history in delivery of PLM to defence companies• Performed 95% of shock qualification by calculation for NZ
ANZAC frigates• A track record of providing structural analysis for composite
helicopter design.• Composites structural analysis support provided to Pure
design & Team Emirates NZ America’s Cup bids since 1995
• Recent shock analysis work done for Australian Army via Cubic defence
• 1st time approval for design work for ANZAC frigates by Australian Navy, Blohm Voss & Amecon
DISCRIMINATORS
• ICT services for configuration management training• Implementation services for Aras Innovator PLM/configuration
software
• Implementation services for Blue Cielo Meridian engineering information management software
• CAE services for FEA, CFD , Composites structural analysis
CAPABILITIES
Malcolm AbellBusiness Development Manager- AustraliaMatrix Applied Computing Ltd521 Kooyong Rd, Elsternwick, VIC 3185Tel: + 61 (0) 418 316 484Email: [email protected]
MATRIX APPLIED COMPUTING LTDwww.matrix.co.nz
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly •
• ISO9001:2008• IPC620A• UL
QUALITY APPROVALS & AWARDS
• Department of Defence• GE• Leica Biosystems
KEY CUSTOMERS• Cable Assembies• Wiring Harness• Moulded Assemblies• Curl Cords• IPC620
CAPABILITIES
Luke SavilleManaging DirectorMarkerry Industries Pty Ltd9 Daniel Drive, Carrum Downs, VIC 3201Tel: + 61 3 9781 8100Email: [email protected]
MARKERRY INDUSTRIESwww.mki.com.au
45
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Professional Services • •
• Vidotto Project Controls Group• Greenwich Advisory• LBMS Pty Ltd
KEY PARTNERS
• ASC Manufacturing and Support 1993• Apple Macworld Awards for Best Scheduling App• PC World 1996 – Best Resource Management S/W
QUALITY APPROVALS & AWARDS
• DoD - GASG• Boeing Australia Ltd• Australian Aerospace Ltd• QANTAS Defence systems
KEY CUSTOMERS
• Defence Knowledge and Experience• Innovation through Application of Technology• Specialist Project Management Software Internationally
Proven• Conforms to the project management standards AS4335,
AS4817:2006, EAI_ANSI 748-C• Member of ISO 21500 Project Management Committees on
WBS and EVPM
• It handles multiple projects located in several domains even in overseas as used by NuSub Collins Construction
• Cost competitive• Fully Supported in Australia, Germany, US, UK, NZ and Globally
DISCRIMINATORS
• RAAF - Orion Maintenance at 492 Squadron using Micro Planner X-Pert for R3 to R5 Refits
• RAAF - HS748 Maintenance at Maintenance Squadron - East Sale Planning and Scheduling
• RAAF F18A Refurbishment for ARDU at Edinburgh using Micro Planner X-Pert
• RAAF Hercules C130C and C130H models Refits R3 to R5 for 503Wing at Richmond . Planning & Scheduling
• RAAF F-111C R3-R5 Maintenance for 501Wing at Amberley Planning and Scheduling and software Micro Planner X-Pert
• GASG – Air 87 Planner and Scheduler ARH – GASG – Tactical Fighter Planner and Scheduler –
• Boeing – Earned Value and Project Controls for F-111 Upgrades and Servicing’s
• GAF Construction of Mirage Fighter Planning and Scheduling Consultancy
CAPABILITIES
Raphael M. DüaCEOMicro Planning International Pty LtdPO Box 7177, Melbourne, VIC 8004Tel: + 61 (0) 418 531 111Email: [email protected]
MICRO PLANNING INTERNATIONAL PTY LTDwww.microplanning.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering • •
Information Systems • •
Integration •
Materials Technology •
Professional Services •
• Dassault Systemes
KEY PARTNERS
• AS9100 Rev C• ISO9001:2008• CASA Part 21M• BAE Systems Chairman’s Award
QUALITY APPROVALS & AWARDS
• DST Group• Boeing Defence Systems Australia• Airbus Group Australia Pacific• BAE Systems
KEY CUSTOMERS
• Extensive track record in supporting Australian Defence and Defence Primes
• Highly capable and experienced staff• Cost competitive through low overheads and efficient business
practices
• National coverage with offices accross Australia and New Zealand
• Internationally recognised and accredited Quality management System
DISCRIMINATORS
• Design, Analysis, Test and Certification of structures, systems and equipment (mechanical, electrical, avionics)
• Continuing Airworthiness Management Services• Project Management
• Consulting engineering services covering, crash worthiness, Fatigue and Damage Tolerance and Stores Clearance
• Product Development and Data Management Software (CATIA, ENOVIA, DELMIA)
CAPABILITIES
Miro MileticManaging DirectorMEMKO Pty Ltd455 Bourke St, Melbourne, VIC 3000Tel: + 61 3 8605 7777Email: [email protected]
MEMKOwww.memko.com.au
46
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Professional Services •
Safety Systems & Testing • •
• Moog Inc and subsidiaries
KEY PARTNERS
• ISO 9001:2015• ANSI/ESD 20:20• IPC-A-610/IPC-7711/IPC-7721
QUALITY APPROVALS & AWARDS
• Air: RAAF,Boeing, RAN, BAE, Cobham,NZDF• Land:COA, M113,ASLAV,BAE,GD, Elbit,Thales,NZDF• Sea: BAE,ASC,Austal, Thales,NZDF• Research: DSTG,CSIRO & University Partners
KEY CUSTOMERS
• Design - Manufacture of motion control systems to the Defence, Industrial, Energy, Marine & Aviation Industries
• Comprehensive test suite covering environment and full system testing of electronic and mechanical systems
• Sustainment through in country assets for motion control equipment; electronics, pneumatics, hydraulics and EM
• Reverse & Upgrade engineering capability of obsolete servo control systems, actuation and hardware
• Facility - Optimised purpose built Lean layout, R&D labs, training facilities and secure storage
• Fully ITAR compliant and trained workforce in secure locked down facility - including military grade surveillance
• Design , assembly and integration of simulation (6 DOF Motion)& test platforms (4&7 Poster test,EH Test table etc)
• A customer centric approach centered around working closely with key Government agencies and stakeholders
DISCRIMINATORS
• Design and manufacture of precision motion control products EM/EH
• Din rail electronics manufacture and Product Life-cycle Management
• Through Life Support on major Defence platforms such as UH-60, SH-60, AW109, ASLAV, M113, M1A1, Collins & F18
• On-site capability for service and support for power generation actuation and control
• Technical support and ICS to security and sensors for Defence and Industrial Applications
• Engineering value add services such as design, feasibility studies, specification verification and FMEA
• Logistics and Supply Chain Management of Moog install base for Aviation, Space & Defence, Industrial and Component
• On-site training facilities supporting VR and Haptic technology
CAPABILITIES
Peter HeitmannSales & Business Development ManagerMoog Australia Pty Ltd18 Corporate Dr, Heatherton VIC 3202Tel: + 61 3 9561 6044Email: [email protected]
MOOG AUSTRALIAwww.moog.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Avionics / Electrical Systems •
Design & Engineering •
Integration •
Manufacturing / Fabrication / Assembly •
Safety Systems & Testing •
• Australian Industry & Defence Network (AIDN)• Australian Industry Group (AIG)
KEY PARTNERS
• ISO 9001• AS9100 Rev C
QUALITY APPROVALS & AWARDS
• BAE Systems - Nulka Decoy Canister systems• Thales - Power/Electric Products• Rheinmetall - Metal & Power/Electric Products• Boeing - Communication Systems Boxes
KEY CUSTOMERS• Wide range of in-house electro mechanical capabilities• Smallest / Lightest MIL-STD 28V, up to 550A Alternators• World wide product support & ITAR Compliant
DISCRIMINATORS
• Cable Harness-design, manufacture & test• Electronic / Mechanical Assembly• Enclosures, Racking Systems & Cabinets• Testing (CMM, Environmental, RF, EMC & IP)• Precision CNC Machining, Sheet Metal & Robotic Welding
• Surface finishing (Chromate, Powder Coating & Wet Paint)• Power Products: Alternators, APUs, PDUs, Interface Switch
Boxes, and Exportable Power solutions• C4i Equipment Mounting Kits
CAPABILITIES
Medhat WassefBusiness Development Manager - DefenceMilspec Manufacturing Pty Ltd874 Knight Rd, Albury, NSW 2640Tel: + 61 (0) 429 400 382Email: [email protected]
MILSPEC MANUFACTURINGwww.milspecmanufacturing.com
47
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering • •
Information Systems •
Integration •
Materials Technology •
Professional Services •
Research & Development •
Safety Systems & Testing •
• ASNZS 4801 - Safety• ISO 14001 – Environment• CASA 21M and EASA21J
QUALITY APPROVALS & AWARDS
• CASG• Lockheed Martin• Airbus Group• Boeing Defence Australia
KEY CUSTOMERS
• Extensive experience in Defence T&E and managing large V&V programs for both CoA and Defence Industry
• One of the largest providers of Aircraft Type Certification services. Our subsidiary, GVH is a EASA 21J org.
• Prime provider of System Safety services in Defence and Defence industry including a unique capability in software
• Unique capability in simulation development and accreditation of Aerospace Simulators for Defence
• CASA 21M and EASA21J Design Approvals with design offices in Australia, Singapore and the UK
• Extensive experience in the introduction into service of major aerospace capabilities in the ADF
DISCRIMINATORS
• Verification and Validation and Test and Evaluation of aerospace, maritime and land systems
• Aircraft Type Certification in both the legacy ADF Defence Aviation Safety Program and the new DASR
• System Safety including Software Assurance in aerospace and Workplace Health and Safety
• Simulation and Synthetic training including simulator fidelity accreditation
• Aerospace engineering design, including structural and avionics modifications/repairs
• Aerospace program/project management including risk management
CAPABILITIES
Jeff PerryGeneral Manager - Aerospace and Surveillance BUNova Defence Pty LtdL2, 95 Coventry St, South Melbourne, VIC 3205Tel: + 61 8 8252 7100Email: [email protected]
NOVA SYSTEMSwww.novasystems.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering • •
Manufacturing / Fabrication / Assembly • •
• 30 Years of Experience supplying the Aerospace & Defence Industry
• Boeing Approved, ITAR/EAR Compliant AS9100 Accredited• World Leading 3D Printing Capability• Exceptional On-Time Delivery and Product Conformance
record
DISCRIMINATORS
• High Precision CNC Machined Parts• Complex Tooling• Jigs & Fixtures• 3D Printed Metal Parts
CAPABILITIES
Adrian SansonettiBusiness ManagerNezkot Pty Ltd15 Enterprise Dr, Bundoora, VIC 3038Tel: + 61 3 9467 8100Email: [email protected]
NEZKOT PRECISION TOOLING & ENGINEERINGwww.nezkot.com
• CSIRO
KEY PARTNERS
• AS9100• ISO9001
QUALITY APPROVALS & AWARDS
• Boeing Aerostructures• Boeing Defence• Rheinmetall
KEY CUSTOMERS
48
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Design & Engineering • •
Integration •
Professional Services • •
• Pennant International Group • BAE Systems Australia • MBDA Australia • Our customers are our partners
KEY PARTNERS
• Letter of Recognised Supply • Defence Recognised Supplier • Government Endorsed Supplier
QUALITY APPROVALS & AWARDS
• Australian Defence Organisation • BAE Systems Australia • Boeing Defence Australia• SAAB Australia
KEY CUSTOMERS
• Expert knowledge in the design, development, and implementation of logistics and training solutions.
• Global operations across Europe, North America, Australasia. • Over 50 years experience delivering and supporting solutions
to international defence forces and industry. • Product life cycle solutions from design requirements,
integration, application, through support.
• Integrated products compliant to international standards. • Support of legacy training devices. • Integrated customer support. • In-house R&D, design, production of custom training solutions.
DISCRIMINATORS
• Integrated Logistics Support • Logistics Support Analysis/Records • Life Cycle Costing • Level of Repair Analysis • Spares Optimisation • Computer Aided Instruction • Part Task Trainers • Simulators & Systems Emulators
CAPABILITIES
David StephanGeneral ManagerPennant Australasia Pty LtdSuite 6, 334 Highbury Rd, Mount Waverley, VIC 4149Tel: + 61 3 9886 7977Email: [email protected]
PENNANT AUSTRALASIA PTY LTDwww.pennantaust.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering • •
Information Systems • •
Integration • •
Professional Services •
Research & Development • •
• BAE Systems• Thales• Boeing• Microsoft Gold Partner
KEY PARTNERS
• ISO 9001:2008• Defence Preferred Supplier• AIDN & Victorian Defence Alliance Members• Victorian Export Award Winner
QUALITY APPROVALS & AWARDS
• Australian Defence Force, RAAF, & Army• Royal Canadian Air Force, NATO Flight Training• RAF UK, European Defence Agency,• Finish Defense Force, Singapore Air Force
KEY CUSTOMERS
• Delivering fit for purpose commercial off the shelf IT solutions to defence forces globally for over 23yrs.
• We design, build, implement, integrate, train, support, and maintain solutions to ISO9001:2008 standards.
• Proven track record in the delivery and sustainment of multiple COTS software products to Defence forces
• Our development, services. & delivery teams comprise of many industry experienced and ex-military ops personnel.
• Supporting 12 militaries, and multiple Defence Prime customers across 14 countries.
• Our people deliver streamlined operations management solutions within highly complex command & control environs.
• Workforce includes AGSVA security cleared, PRINCE2, PMBOK and ex-Commonwealth.
DISCRIMINATORS
• Software engineering services covering the complete product life cycle through to long term sustainment.
• Project management above and below the line, with staff experienced in Defence operations, procurement, and ICT.
• Delivery of Integrated solutions for joint force and coalition operations
• Tailored training services to improve software utilisation, including the provision of LCMS and LMS solutions.
• Operations process optimisation, while improving safety, compliance, and communications
• Reporting and data analysis services to deliver insight and resolve problems
• AppKit development for application deployment to your trusted and secure environments.
• We are the Development team behind FlightPro, MEMS, PILS and CoastPro COTS products.
CAPABILITIES
Bruce MoorsGeneral ManagerOcean Software Pty LtdL40, 120 Collins St, Melbourne, VIC 3000Tel: + 61 3 8614 7200Email: [email protected]
OCEAN SOFTWAREwww.ocean.software
49
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Research & Development •
• Pilatus Aircraft Ltd of Switzerland
KEY PARTNERS
• EN9100• ISO14001
QUALITY APPROVALS & AWARDS
• Australian Defence Force• Republic Of Singapore Defence Force• Royal Flying Doctor Service• Many State Police Forces and private owners
KEY CUSTOMERS• Pilatus is the world leader in the production of single engine
turboprop aircraft• The Pilatus PC-9 and PC-21 are the trainer aircraft for over 25
Defence Forces including the ADF and RSAF.• The new PC-24 jet aircraft provides a unique and beneficial
mix of performance and operating costs.
DISCRIMINATORS
• Aircraft Design, Manufacture, Sales and Support for the Pilatus range of aircraft
• Aircraft engineering for the Pilatus PC-9, PC-12, PC-21 and PC-24 aircraft
• Spares support for the Pilatus PC-9, PC-12, PC-21 and PC-24 aircraft
CAPABILITIES
Rob OliverDirector Defence AustraliaPilatus Australia Pty LtdPO Box 404, Sale, VIC 3850Tel: + 61 (0) 400 432 906Email: [email protected]
PILATUS AUSTRALIA PTY LTDwww.pilatus-aircraft.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Design & Engineering • •
Information Systems •
Professional Services • •
Research & Development •
Safety Systems & Testing •
• Siemens Industrial Software• Babcock Analytic Services
KEY PARTNERS
• Letter of Recognised Supply• SME Innovation Award (Pacific 2013)• JSF JSTAB (2007-09)• IBM R&D Award (AIIA 2009)
QUALITY APPROVALS & AWARDS
• US Air Force• Pratt & Whitney• US Army• BAE Systems Australia
KEY CUSTOMERS
• Maintenance Aware Design environment (MADe) is developed by PHM Technology
• MADe is a model-based engineering analysis and trade study solution
• Integrated Safety & Maintainability analysis solution• Configuration Management of engineering analysis across the
Capability Lifecycle
• Engineering / program decision support across acquisition and support
• Performance Based Contract management (engineering validation of support based on C/R/E)
DISCRIMINATORS
• Integrated Logistic Support• Maintenance Determination (RCM, B-RCM)• Airworthiness Certification (FMEA, FTA, RBD)• Life Cycle Costing (engineering based)• CBM design and validation (Fault Detection / Isolation,
diagnostic reasoners)
CAPABILITIES
Chris SteckiCEOPHM Technology Pty Ltd9/120 Queens Pde, North Fitzroy, VIC 3068Tel: + 61 3 9482 2007Email: [email protected]
PHM TECHNOLOGYwww.phmtechnology.com
50
• Australian owned and operated business since 1956• Experience in a wide range of Tooling and Moulds
DISCRIMINATORS
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Information Systems •
Manufacturing / Fabrication / Assembly •
Professional Services •
Research & Development •
• A2K Technologies - CAD Software and Support• Bentley Systems - CAD Software and Support
KEY PARTNERS
• Internal QMS based on ISO 9002.• QMS first implemented in 1996• ISO 9001 (in progress)
QUALITY APPROVALS & AWARDS
• AGL• Australian Paper• Energy Australia• Esso Australia - ExxonMobil Australia group
KEY CUSTOMERS
• Australian owned company providing engineering drafting services and technical support since 1993
• Ongoing preferred supplier of drafting services for key industrial customers for periods exceeding 20 years
• Fit-for-purpose component check specialists. Minimising wastage and downtime
• Software based CAD standards conformance ensuring accuracy & consistency
• Specialists in legacy drawing conversions to current software platforms
• Automated creation of drawing registers & asset databases• Web based drawing search and retrieval systems
DISCRIMINATORS
• Engineering Drafting Services with particular expertise in heavy industrial plant, including precision components
• Design and conceptual development utilising 3D modeling in multiple software platforms
• Industrial plant specialists, including; steam-turbine components, boiler pressure parts, motor & pump systems
• Electrical and Instrumentation design drafting including PLC and logic systems
• Bulk Materials Handling including; conveyors, hoppers & chutes, conveyor idler & pulley systems.
• Piping Diagrams including; corrosion survey isometrics, P&ID’s, hydraulic & pneumatic diagrams
• Hazardous Area Experience especially with regard to compliance issues and Major Hazard Facility support
• Drawing Management specialists; including, Asset-related databases and drawing registration systems
CAPABILITIES
Geoffrey ChilverManaging DirectorPro Draft Pty. Ltd.Suite 4/213 Princes Dr, Morwell, VIC 3840Tel: + 61 3 5133 8007Email: [email protected]
PRO DRAFTwww.prodraft.com.auPro Draft
ENGINEERING DRAFTING
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly •
• ISO 9001
QUALITY APPROVALS & AWARDS
• Defence Science and Technology Group• QinetiQ• ACS Australia• Plastic & Composites Industry
KEY CUSTOMERS
• Precision 5 Axis CNC Milling• 3D Machining of Composite Parts• Design and Manufacture of Plastic Injection Moulds• Manufacture of Composite Part Tooling• Machine Shop Services including EDM• Graphite Machining
CAPABILITIES
Gary DownDirectorPlastool International Pty Ltd70 Bond St West, Mordialloc, VIC 3195Tel: + 61 3 9588 2555Email: [email protected]
PLASTOOL INTERNATIONAL PTY LTDwww.plastool.com.au
51
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Research & Development •
Safety Systems & Testing •
• Global leaders in gas turbine dynamometer test systems
DISCRIMINATORS
• Gas Turbine Dynamometers• Turbo prop Dynamometers• Turbo prop engine trolleys
CAPABILITIES
Bernard ReganDirectorProject Management & Design Pty Ltd14 Kendall St, Elwood, VIC 3184Tel: + 61 (0) 419 891 512Email: [email protected]
PROMANDwww.promand.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Avionics / Electrical Systems •
Design & Engineering •
Research & Development •
Safety Systems & Testing •
• Airbus (UK, Germany, Australia and France)• AVIC (China)• Nova Aerospace (Australia)• Royal Australian Air Forcce
KEY CUSTOMERS
• PPI has trained over 13,000 professionals on six continents in systems engineering and related disciplines
• Our client list includes many of the world’s best known aerospace companies and agencies.
• Our training is intensely focused on sound principles based on historical evidence.
• Our training is focused on the astute application of these principles to create value for the enterprise.
• The feedback from delegates and their companies? - overwhelmingly “Excellent” or “Very Good”.
• PPI has our own people on the ground in Europe, USA, China, South Africa and Brazil.
• We are known as thought leaders, by way of new and improved techniques and engineering
• We contribute to standards, having content in four out of five significant systems engineering
DISCRIMINATORS
• Systems Engineering• Requirements Analysis• Architectural Design• Systems Engineering Management• CSEP Exam Preparation
• Requirements, OCD & CONOPS in Military Capability Development
• Software Engineering• Human Systems Integration
CAPABILITIES
Brooke MitchenerMarketing & Travel CoordinatorProject Performance International2 Parkgate Dr, Ringwood North, VIC 3134Tel: + 61 3 9876 7345Email: [email protected]
PROJECT PERFORMANCE INTERNATIONALwww.ppi-int.com
• Froude Dyno• Go Power• CEL Aerospace
KEY PARTNERS
• Primary OEM approved supplier
QUALITY APPROVALS & AWARDS
• Pratt and Whitney (PWC)• Turbomeca• Solar Turbines TAE• Rolls Royce
KEY CUSTOMERS
52
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems •
Design & Engineering • •
Information Systems •
Integration •
Materials Technology •
Professional Services •
Research & Development •
Safety Systems & Testing •• QinetiQ Group plc• Commerce Decisions• Optasense
KEY PARTNERS
• AS/NZS ISO 9001: 2008• 2015 GASG/Industry Award for Minor Sustainment• 2015 AIDN-ACT Young Achiever of the Year Award• 2015 Defence Teaming Centre Employer of Choice
QUALITY APPROVALS & AWARDS
• Defence Aviation Safety Authority• Capability Acquisition & Sustainment Group• Australian Defence Force• Major Defence and Civil Aerospace OEMs
KEY CUSTOMERS
• DASR Part 21 Subpart J Accreditation (scope extends across all ADF aircraft)
• Strategic Partnership with Defence Aviation Safety Authority and Defence Science & Technology Group
• Largest number of Aerospace Structural Engineers in Australia with a catalogue that exceeds 3,500 approved designs
• Member of Defence Industry Security Program
• All Consultants and Engineers have Australian Security Clearances
• Collaborative research programs with DST Group• Ability to provide independent services from design, through to
test and certification
DISCRIMINATORS
• Aircraft Structural Integrity Engineering• Aerospace Advisory Services• Aircraft Health Usage Monitoring• Non-Destructive Testing
• Aerospace Engineering Design and Repair• Access to global Aircraft Test & Certification capabilities• Manufacturing / Fabrication / Assembly of bespoke prototypes
and parts
CAPABILITIES
Matthew SibreeGeneral Manager AerospaceQinetQ Pty LtdLevel 3, 210 Kings Way, South Melbourne, VIC 3025Tel: + 61 1800 038 081Email: [email protected]
QINETIQ AUSTRALIAwww.QinetiQ.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Design & Engineering • •
Manufacturing / Fabrication / Assembly • •
Professional Services • •
• Kito Corporation• Onesteel Australia• Endo• Columbus Mckinnon
KEY PARTNERS
• ISO 9001 Accredited-Quality Management Systems• Member of Australian Standards ME-005 Technical
Committee - Hoists
QUALITY APPROVALS & AWARDS
• Department of Defence• Thales Australia• Boeing• Toyota Australia
KEY CUSTOMERS• Supplier to the Department of Defence for over 30 years.• Suppliers and installers of hoist and crane systems to BHP,
Thales Australia, Boeing, Toyota Australia, ASC, Forgacs, BAE Williamstown, Rio Tinto, and many more.
• Regional branches and support in S.A,VIC, NSW, QLD and WA• Ability to supply all lifting products.
DISCRIMINATORS
• Australian chain and lifting equipment manufacturer based in Melbourne since 1923.
• Ability to design, supply and Install many various types of crane and hoist systems – up to 100 Tonne Capacity
• Supply all types of specialized manual hoists – chain blocks, lever blocks up to 100 Tonne Capacity
• We have the provision of manufacturing or assembling special hoist systems in Melbourne.
• Full engineering, fabrication, drafting and installation capabilities
• The only 100% Australian Design, manufacture and supply all types of lifting chain/slings
• In-house metallurgical laboratory for testing, analysis and quality control.
CAPABILITIES
Andrew MackenzieBusiness Development Representative - VIC/TASPWB Anchor Limited441 Grimshaw St, Bundoora, VIC 3083Tel: + 61 (0) 418 753 912Email: [email protected]
PWB ANCHOR LIMITEDwww.pwbanchor.com.au
53
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly •
Research & Development •
• Deakin University
KEY PARTNERS
• AS9100 Rev C/ISO9001:2000• NADCAP approval• ISO14001
QUALITY APPROVALS & AWARDS
• Northrop Grumman• Lockheed Martin• BAE Systems• Marand
KEY CUSTOMERS
• Ability to service aerospace & defence built-to-specification or build-to-print contracts
• Development & production facilities in Bankstown (NSW), Waurn Ponds (Victoria) & Munich (Germany)
• Strong value proposition for all our customers - Quality, Speed, Cost & Lightweighting
• Willingness to form strategic partnerships/alliances with key customers & suppliers
DISCRIMINATORS
• Leading innovator of advanced composites manufacturing solutions
• Largest independent, aerospace-grade composites manufacturer in Australia
• Traditional Autoclave & leading edge Out-of-Autoclave production technologies
• Supply of advanced composites manufacturing solutions for the aerospace/defence & automotive sectors
CAPABILITIES
Carl De KoningExecutive General Manager, Business DevelopmentQuickstep Holdings LimitedBuilding LA, 75 Pigdons Rd, Waurn Ponds, VIC 3216Tel: + 61 3 9192 5504Email: [email protected]
QUICKSTEP HOLDINGS LIMITEDwww.quickstep.com.au
• ATTAR• Five Rings Aerospace• AIDN• ICN
KEY PARTNERS
• ISO9001:2008• Member of RPDE Program - Rapid Prototyping, Development
and Evaluation
QUALITY APPROVALS & AWARDS
• Airbus Group Australia Pacific• QuEST Global Engineering
KEY CUSTOMERS
• Highly Regarded and Experienced Engineers Passionate About Quality
• Team Previously Engaged on Many Projects of Global Significance, Including F35 JSF, A400M, A380, A350, Hawkei and Chinook CH-47D
• Lean Cost Structure• Flexible, Client Tailored Engagement Models
• Remote Working Expertise - Framework Established for ‘24 Hour Business Cycle’
• Agile and Dynamic Team Able to Continuously Provide Exceptional Value
• Privately Owned Australian Company• ITAR Ready
DISCRIMINATORS
• Static Strength Analysis• FEA - Linear Static, Dynamic, Thermal and Buckling, Non-
Linear, Large Displacement and Post-Buckling Behaviour• Fatigue and Damage Tolerance (F&DT) Analysis - Crack
Growth, Fatigue Stress & Life Prediction• Structural Design & Weight Optimisation
• Highly Experienced with Metallic, Composite & Hybrid Structures
• Project Management• Through Life Support & Life Extension Programs• Repair Design & Substantiation, aswell as Concession
Solutions for Manufacturing Support
CAPABILITIES
QUARTEKwww.quartek.com.au
Matthew Goldstraw Managing DirectorQuartek Pty Ltd700 Bourke Street, Docklands, VIC 3008Tel: +61 (0) 449 264 289Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Integration •
Materials Technology •
Professional Services •
Research & Development •
54
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Design & Engineering •
Integration •
Manufacturing / Fabrication / Assembly • •
Materials Technology •
Professional Services •
Research & Development •
Safety Systems & Testing •
• Switlik Survival Products• Paraclete Aviation Life Support• ACR• Northwall Innovation
KEY PARTNERS
• Approved ACR Battery Replacement Centre• ACMA Compliance Import license• Finalist “Innovation” Moira Business awards• Defence Approved Supplier (Z0LY2)
QUALITY APPROVALS & AWARDS
• Department of Defence• Defence Primes• Australian Government Federal and State• Major Helicopter and fixed wing companies
KEY CUSTOMERS
• One stop Military Aviation Life Support Service centre• Security cleared project manager with 30 years Aviation Life
Support experience• Defence approved supplier (Z0LY2)• Australian stockist of ALSE Equipment. Minimised lead time.
• Dedicated Switlik Survival Products Defence Technical Sales Advisor
• Best in country product Innovations in safety and comfort• Proven Defence Project track record
DISCRIMINATORS
• Aviation Flight Helmets, sales, service, upgrade. Latest innovations in safety and comfort technology
• Customised communications for flight helmets including noise reduction systems CEP and ANR
• Premium Life rafts, Life vests & Anti-exposure suits. Customised solutions for projects with OEM and R&D support.
• Full Survival Kits assembled to your requirements incl PLB, Flares, signal mirrors, Sea marker dye.
• Aviation NVG Accessories, sales, support and service incl. Mike lights, Finger lites.
• Flight Clothing. Range of Nomex goods, flight suits, gloves skull caps and soft line helmet bags,
• Ability to supply and custom size & fit a range of quality ALSE equipment from one Australian vendor.
• Aviation Life Support Consultancy. Individual project management of ALSE products and services.
CAPABILITIES
Greg BayneManaging DirectorRed Baron ALSEHangar 17 John Duigan Dr, Yarrawonga, VIC 3730Tel: + 61 3 5744 2166Email: [email protected]
RED BARON ALSEwww.redbaronalse.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering • •
Manufacturing / Fabrication / Assembly •
Research & Development •
• Hardman Bros Pty Ltd - owner of R&I since 1999• Marks 4WD sister company in Hardman group 2011• Interlloy Pty Ltd• Thyssen Krupp Aerospace
KEY PARTNERS
• AS9100 Rev C. Audited by SAI Global• AS9001/2008. Audited by SAI Global
QUALITY APPROVALS & AWARDS
• Trakka Corp Pty Ltd• BAE Systems Australia• Leica Biosystems Melbourne Ltd• Ellex Medical Pty Ltd
KEY CUSTOMERS
• Over 160 years of combined history between our Companies - R&I (1948) our parent Company Hardman Bros (1953)
• We have over 130 different machines located within 3 buildings with almost 8000 m² of floor space located on 5 ac.
• Access to the most diverse range of gear cutting machines on site in Australia
• Proven capabilities that we have developed and refined since first established in 1948.
• Extensive range of CNC and traditional machinery with over 100 machines in commission on site
• Meeting customer demands for AS9100; FDA; RoHS etc with full traceability
• Fine pitch gear cutting capablities
DISCRIMINATORS
• CNC Gear Cutting & CNC Gear Grinding (Ø 800 mm x 600 mm width) Gear cutting Ø 2.0mm to Ø 160 mm
• CNC Lathes – Robot loading, Sub spindles, Y axis & Swiss style gang tool.
• CNC Milling – 5 Axis simultaneous (pallet loading) & 3 or 4 axis (inc 3 mt bed)
• CNC Vertical Lathe – Max Ø 1200 mm with C axis milling.• CNC Cylindrical Grinding & Precision Honing Ø 3 – 150 mm
• Horizontal & Vertical Broaches; Internal Keyway Slotting to 800 mm long
• CMM – Brown & Sharp 1800 x 1000 x 900 mm Vision Inspection – MicroVu Optical Comparators and Gear Inspection
• Hardness Testing and Surface Tester (Mititoyo & Accrutech Extensive range of Metrology equipment
CAPABILITIES
Andrew RowellGeneral ManagerR&I Instrument & Gear Co. (AUST) Pty Ltd385-393 Lwr Dandenong Rd, Dingley Village, VIC 3172Tel: + 61 3 9552 6565Email: [email protected]
R&I INSTRUMENT & GEAR CO. (AUST) PTY LTDwww.rigear.com.au
55
• Velcon• Elaflex• Cla-Val• Isoil
KEY PARTNERS
• AirBP• Exxon Mobil• AUS Defence Force • NZ Defence Force
KEY CUSTOMERS
• ISO 9001 Accredited • Defence Recognised Supply Scheme • High Performance Accreditation Award - AirBP
QUALITY APPROVALS & AWARDS
• Strong Global Supply chain and network • Over 40 years experience in Commercial & Defence refuelling
capabilities • ONE-STOP business service provider - offering turnkey
solutions • Operator usability is maximized during design stage with
leading-edge technology
• Vehicles and equipment can be fault found remotely from anywhere in the world
• Customized designs • Offers international support in S.E. Asia • Compact vehicles and systems
DISCRIMINATORS
• Design and Manufacture Aviation Refuelling Equipment • Design and Manufacture Fuel Handling Pumping Systems • Design and Manufacture Marine Bunkering Vehicles • Supply specialized fuel additive injection systems & loading
arms • Supply Aviation Refueling Spare Parts • Offers local and international support & maintenance
CAPABILITIES
Mark Smith Commercial ManagerRefuel International602-606 Somerville Rd, Sunshine West, VIC 3020Tel: +61 3 8311 6600 Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering •
Information Systems •
Integration •
Manufacturing / Fabrication / Assembly •
Materials Technology •
Professional Services •
Research & Development •
Safety Systems & Testing •
• Xiamen Airlines, Air China, Hainan Airlines• Royal Australian Air Force• QANTAS, Tiger Airways• Oman Air
KEY PARTNERS
• Advanced Manufacturing Precinct• Aeronautical Wind Tunnel• Air Traffic Management Lab• Aircraft/Autonomous Systems Lab
QUALITY APPROVALS & AWARDS
• Defence Science and Technology Group• Boeing, COMAC, Thales Australia• USAF, US ONR, DMTC, CASA• LMS International, COMAC, Airbus
KEY CUSTOMERS
• Sir Lawrence Wackett Aerospace Research Centre - a national leader in aerospace and aviation research.
• Design, analysis and numerical/experimental characterisation of advanced fibre-reinforced composite materials
• Light-weighting and low-cost manufacturing of alloys and 3D textile preform for resin infusion
• Non-destructive evaluations and Structural Health Monitoring (SHM)
• Multidisciplinary Design Optimization• Reduced-order-models and advanced numerical methods and
computational codes• UAS safety systems, certification, integration• Next generation ATM and avionics systems
DISCRIMINATORS
• Full service education & training – from short course, vocational, sub-bachelor, undergraduate, masters, PhD
• Composite aircraft structures research• Through life support technologies research• Life extension of ageing aircraft research
• UAV design and development research• Airworthiness research• Aeroelasticity and Vibration Control research• Air Traffic Management and Avionics research
CAPABILITIES
Mark RaphaelIndustry Development ManagerRoyal Melbourne Institute of Technology LtdGPO Box 2476, Melbourne, VIC 3001Tel: + 61 (0) 432 752 646Email: [email protected]
RMIT UNIVERSITYwww.rmit.edu.au
REFUEL INTERNATIONALwww.refuelin.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering • •
Integration • •
Manufacturing / Fabrication / Assembly • •
Professional Services • •
Research & Development • •
56
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Avionics / Electrical Systems •
Design & Engineering •
Integration •
Manufacturing / Fabrication / Assembly • •
Materials Technology •
Research & Development •
Safety Systems & Testing •
• RUAG Group (Parent)• Honeywell• Moog• Eaton
KEY PARTNERS
• Nadcap Chemical Processing, NDT & Shot Peen• DGTA AMO and AEO• AS9100C, ISO 9001:2000• CASA Approved AMO under CASR Pt145
QUALITY APPROVALS & AWARDS
• Royal Australian Air Force• Royal Malaysian Air Force• Royal Australian Navy• United Technologies Aerospace Systems
KEY CUSTOMERS
• Full ITAR approved staff and processes• Involved in JSF Manufacture since 2004• Long term contracts for MRO with ADF, proven track record
leading to higher reliability and increased availability• World leader in Additive Manufacturing with approved Repair
Technology capability• Experienced, highly qualified staff across multiple sites
Australia sites and support within entire RUAG Group
• Highly Accredited with Nadcap for Non-Destructive Testing, Chemical Processing & Shot Peen, ISO 9001:2000, AS9100C
• SCIP program participant• ‘One Stop Shop’ able to provide turn-key solutions due to wide
range of capabilities in-house
DISCRIMINATORS
• Component level Maintenance Repair and Overhaul• Precision Manufacturing of complex components at tight
tolerance levels• Managed Maintenance Repair and Overhaul• Metal Surface Treatment and Finishing, including Paint and
Prime, with Nadcap and multiple global prime approvals
• World leading Additive Repair Technologies and Manufacture• Nadcap approved Non-Destructive Testing• Engineering Services for design, development, implementation
& certification of repair schemes and test equipment• Supply Chain Management for spares
CAPABILITIES
Paul DonaldSenior Business Development ManagerRUAG Australia Pty Ltd836 Mountain Hwy, Bayswater, VIC 3153Tel: + 61 (0) 468 996 002Email: [email protected]
RUAG AUSTRALIAwww.ruag.com.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Design & Engineering •
Manufacturing / Fabrication / Assembly • •
• American Gear Manufacturers Association • AIDN • Eurotrans (Europe’s gear association) • Team Defence Australia
KEY PARTNERS
• AS9100C • ISO9001:2008 • BAE Systems approved supplier • Significant Achievement Award 2013
QUALITY APPROVALS & AWARDS
• BAE Systems • Marand Precision Engineering• Ferra Engineering• Boeing Defence (2nd Tier)
KEY CUSTOMERS
• Highly innovative, high end and high value gear manufacturer• Australia’s first AS9100C accredited gear manufacturer • Proven track record into defence programs • 60+ years experience in the gearing industry
• Internationally connected: Members of the American Gear Manufacturers Association and Eurotrans, Europe’s gear association
• Ability to manufacture to high quality standards (AGMA 2000: 12+)
DISCRIMINATORS
• CNC gear cutting of spur and helical gears • CNC gear grinding of spur and helical gears • CNC gear metrology • CNC rack milling • Bevel gear cutting
• Sub assemblies• Complete in house machining capability (turning, milling &
grinding) • Automated CNC gear cutting for production runs
CAPABILITIES
Gavin New Sales & MarketingRonson Gears18 Teton Ct, Highett, VIC 3190Tel: +61 3 9276 8900Email: [email protected]
RONSON GEARSwww.ronsongears.com.au
57
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering • •
Information Systems •
Integration • •
Manufacturing / Fabrication / Assembly • •
Professional Services •
Research & Development • •
Safety Systems & Testing • •
• SIEMENS AG• DST Group• BAES• Atos
KEY PARTNERS
• ISO 9001• AIDN Member
QUALITY APPROVALS & AWARDS
• Joint Strike Fighter (US)• Royal Australian Navy, Royal New Zealand Navy• United States Department of Defence• BAES UK
KEY CUSTOMERS
• Worldwide Aerospace systems capabilities and proven track record in many locations
• Siemens PLM Teamcenter collaboration suite for whole of life product management
• Best of class test and simulation solutions, fully integrated with Teamcentre
• Unparalleled positioning as a thought leader and innovator for the digitization of manufacturing assets
• Large local presence, with regional and global reach for support
• Deep relationships and understanding of the Defence and industry sector
• Siemens investment in Defence and industry, including workforce development and technical training
DISCRIMINATORS
• Aerospace Product Lifecycle Management systems• Aerospace Design and Manufacturing Operations systems• Space Systems Engineering software• Program Management solutions for Avionics and Electronics• Anvanced Manufacturing Aerospace solutions• Simulation Software and Testing Hardware/Software• Airborne Safety Systems
CAPABILITIES
Andrew SealHead of Marine/DefenceSiemens Pty Ltd885 Mountain Hwy, Bayswater, VIC 3153Tel: + 61 3 9721 7554Email: [email protected]
SIEMENS PTY LTD www.siemens.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Autonomous Systems •
Information Systems •
• AeroVironment• Insitu-Boeing• Cartenav• Northrop Grumman, Lockheed Martin, Raytheon
KEY PARTNERS
• ISO9001• DST Group CTD Program• Commercialisation Australia, PIC-IP• Maritime Australia Civil Innovation Award 2013
QUALITY APPROVALS & AWARDS
• US Navy NAVAIR MQ-8 Fire Scout• ADF - ScanEagle, Shadow, Heron• Canadian Forces• Cobham - AMSA
KEY CUSTOMERS
• Increase maritime search coverage 80 times over existing EO/IR sensors with ViDAR
• Easily added to manned aircraft, helicopters and unmanned aircraft
• Detect objects with little/no electronic signature• Easily integrated into existing mission systems• Operates in challenging terrains and environmental conditions
DISCRIMINATORS
• Kestrel and ViDAR are capability multipliers greatly increasing situational awareness
• ViDAR operates an an optical radar increasing maritime search coverage over 80 times
• Kestrel automatically detects objects over land or sea in full motion video
• Automatically detect & cue operators to small, hard-to-see objects such as vehicles, people & small boats
• Enhance maritime search & rescue by detecting people in the water or life rafts in tough conditions
• Reliably detect objects 24x7 - processing every pixel, every frame, hour after hour
CAPABILITIES
Stewart DayGeneral ManagerSentient Vision Pty Ltd2/95 Salmon St, Port Melbourne, VIC 3207Tel: + 61 3 9646 3331Email: [email protected]
SENTIENT VISION SYSTEMSwww.sentientvision.com
58
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Design & Engineering • •
Materials Technology • •
Professional Services • •
Research & Development • •• Dassault Systemes
KEY PARTNERS
• Australian Defence Force Academy (ADFA) • ANSTO and CSIRO • DST Group
KEY CUSTOMERS
• Established in 2002, Australian & New Zealand partner for the Dassault Systemes SIMULIA brand and Abaqus solution
• All our staff are highly qualified totalling over 80 years of technical experience in simulation consulting
• Capable of small consulting projects through to management of large on-site programmes involving teams of analysts
• We understand simulation is most effective when considered as an integral part of the design & problem resolution
• Provide multi-dimensional solutions with software purchase or leasing combined with training and/or consulting
• Preferred FEA solution in the Defence, Aerospace and Nuclear markets in Australia
DISCRIMINATORS
• Supply & support a scalable portfolio of realistic simulation solutions from the “SIMULIA Abaqus” product suite
• Multiphysics solutions for insight into challenging engineering problems & life cycle management solutions
• Consulting services in the field of Computer Aided Engineering (CAE) & structural Finite Element Analysis (FEA)
• Solving unusual & complex problems, successful delivery on projects that were previously considered extreme
• Highly non-linear FEA - Geometric & contact nonlinearities, material non-linearities, solution dependent loading
• Customised non linear material models - Explosion, Plasticity, Creep & Progressive Failure
• Simulation software development & customisation - Pre/ Post customisations & solver level customisations
• Planning, training & management of analysis projects & R&D programmes
CAPABILITIES
Gerd Diegelmann Managing DirectorSIMUSERVL1/123 Camberwell Rd, Hawthorn East, VIC 3123Tel: + 61 3 9889 5615Email: [email protected]
SIMUSERVwww.simuserv.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering •
Integration •
Research & Development •
• PHM Technology P/L• Siemens PLM• Geoplex P/L• AGI LLC
KEY PARTNERS
• United Aircraft Corporation (Russia)• Roscosmos (Russia)• Thales (Bendigo, Melbourne)• DVR Engineering (Melbourne)
KEY CUSTOMERS
• Established in 1997• With a proven software able to conduct simultaneous analysis
of various missions (subsea, sea, land, air, space)• Able to conduct risk mitigation on a group of satellites, aircraft,
radars as well as ground mission control• Flexible and cost effective
DISCRIMINATORS
• High-fidelity launch, near-Earth and interplanetary trajectory modeling, optimization and full mission planning.
• Space systems architecture and systems engineering.• Customized geometry and temporal analysis services for
multi-asset maritime, ground, air and/or space operations.• Advanced communication systems and link performance
modeling and optimization in RF environments.
• Coverage mapping and optimization of maritime, ground, air and space mission assets/sub-systems on terrain.
• Coverage mapping and optimization of maritime, ground, air and space mission assets/sub-systems on terrain.
• Electronic warfare mission planning and operations modeling.• Model Based analysis of Reliability, Availability and
Maintainability of complex engineering systems
CAPABILITIES
Alex SimdikoffCEOSimdikoff and Sons Pty. Ltd.9/120 Queens Pde, Clifton Hill, VIC 3068Tel: +61 (0) 402 507 123 Tel: [email protected]
SIMDIKOFF GROUPwww.simdikoff.com.au
59
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Manufacturing / Fabrication / Assembly •
Materials Technology •
Research & Development •
Safety Systems & Testing •
• Boeing Company• Hong Kong Aircraft Engineering Company Limited• China Aircraft Services Limited
KEY PARTNERS• We have strong track record in conducting composite
materials research and testings• We have good experience on composite design and repair• We have expertise in aviation education and research for
different airlines and airports• We have advanced facilities to design new materials, examine
materials characterizations and conduct testings.
DISCRIMINATORS
• Composites manufacturing and repair• Aircraft composite design• Human factors and safety assessment• Human machine interaction• Human performance and capability• Airline and airport planning, operation and management• Advanced materials manufacturing
CAPABILITIES
Professor Alan KT LauPro-Vice-Chancellor (Research Performance)Swinburne University of TechnologyJohn St, Hawthorn, Melbourne, VIC 3122Tel: + 61 3 9214 8553Email: [email protected]
SWINBURNE UNIVERSITY OF TECHNOLOGYwww.swinburne.edu.au
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Manufacturing / Fabrication / Assembly •
Safety Systems & Testing •
• Planet Innovation• Hydrix• Procept• LX Group
KEY PARTNERS
• Vic Large Manufacturing Awards Winner 2015• ISO9001, ISO13485, ISO14000• Manufacture to IPC Class 1, 2 or 3
QUALITY APPROVALS & AWARDS
• Thales• Lockheed Martin• Northrop Grumman• Resmed
KEY CUSTOMERS• SRX is the largest Electronic Manufacture In Australasia and
Australian owned• Providing PCBA assembly• Provide Box Built product• Have access to low country sourcing• Manufacturing facilities In Melbourne Australia and Johor
Bahru in Malaysia• ITAR trained personnel
DISCRIMINATORS
• Electronic Contract Manufacture• Electronic/Electrical Assembler• Manufacture directly to Tier 1 Customers
CAPABILITIES
Sam Papadopoulos Business Development ManagerSrxglobal Australia Pty Ltd8- 10 Kitchen Rd, Dandenong South, VIC 3175Tel: + 61 3 9212 4222Email: [email protected]
SRXwww.srxglobal.com.au
60
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems •
Avionics / Electrical Systems •
Design & Engineering •
Information Systems •
Integration •
Materials Technology •
Professional Services •
Research & Development •
Safety Systems & Testing •
• SYSTRA
KEY PARTNERS
• ISO9001• Accredited Engineering Organisation (AEO) ASA
QUALITY APPROVALS & AWARDS
• CASG• Australian Submarine Corporation (ASC)• Thales Australia• DSTG
KEY CUSTOMERS
• All consultants have Australian security clearances ranging from Baseline to Top Secret (PV)
• Proven track record on complex Defence platforms and projects across all three domains (air, land and maritime)
• Significant knowledge base with over 100 highly proficient consultants across all major cities in Australia
• Unique skills sets in Tactical Communication, Battlespace integration and interoperability disciplines
• Industry leading skills in Unmanned Aircraft Systems (UAS) design, airworthiness, safety and certification
• Outcome focused, with a fixed firm price commitment• In-depth knowledge of Defence and Civil Aviation regulatory
frameworks• Strict adherence to quality management and safety principles
(WHS Act)
DISCRIMINATORS
• Professional Engineering Solutions• Systems Engineering, Systems Integration, Verification &
Validation• Program and Project Management including Contract
Management• Systems Safety Assurance and Certification, including Human
Factors Integration• Logistics (ILS), RAMS (Reliability, Availability Maintainability &
Safety), Life Cycle Cost Modelling
• Concept Definition, Capability definition and capture, Solution Architecture
• Hardware Deployment and Integration, Installation design, analysis and modelling
• Requirements Management, Configuration Management and Quality management
CAPABILITIES
Gareth EvansGeneral Manager, Technology ServicesSYSTRA Scott Lister Australia Pty LtdL39, 600 Bourke Street, Melbourne VIC 3000Tel: + 61 (0) 450 717 314Email: [email protected]
SYSTRA SCOTT LISTERwww.scottlister.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems • •
Avionics / Electrical Systems • •
Design & Engineering •
Information Systems •
Integration •
Professional Services •
Research & Development •
Safety Systems & Testing •
• UTC Aerospace Systems (formerly Goodrich)• Arcturus UAV
KEY PARTNERS
• ISO 9001:2015 Certified by Lloyd’s Registry• Member, Defence Industrial Security Program
QUALITY APPROVALS & AWARDS
• Department of Defence (CASG)
KEY CUSTOMERS
• Developer of CORVO Small Unmanned Aerial Systems including CORVO H6M
• Australian representative for UTC Aerospace Systems (UTAS)• Proven methods and procedures compliant with ISO, USA and
NATO Standards• Supplier of the Arcturus JUMP20 UAS capability - Tier II, High
Performance, High Payload, Versatile, VTOL UAS
• Intelligence PED System capable of:• Full motion video (stored & live) and still image (satellite), SAR,
SIGINT, HUMINT, ELINT, Track Data, etc• Sensor and Platform Agnostic• Currently deployed by UK MoD
DISCRIMINATORS
• Founded in 1992, Australian owned, operates throughout Australia and Asia, 100+ employees
• Advanced professional consulting, systems integration and support services in the Defence and Aerospace domains
• Design and integration of Unmanned Aerial Systems including the CORVO H6M multirotor
• C4ISR systems integration services• Project & Program Management; Capability Definition
Development, Acquisition and Sustainment Logistics• Platform, Systems, Communications, Electrical & Electronics
Engineering• Software Development & Integration; Verification and
Validation; Test Program Management and Execution• ICT System Architecture/Design; Managed Application Support
Services; Business Analysis
CAPABILITIES
Amanda HoltCEOSYPAQ Systems Pty LtdLevel 5, 441 St Kilda Rd, Melbourne VIC 3004Tel: + 61 3 9867 2565Email: [email protected]
SYPAQ SYSTEMS PTY LTDwww.sypaq.com.au
61
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Design & Engineering •
Integration •
Manufacturing / Fabrication / Assembly •
Professional Services •
• The PAC Group - Worldwide
KEY PARTNERS
• ISO 9001
QUALITY APPROVALS & AWARDS
• MMG Limited• General Motors Australia• Toyota Motor Company• Thales - Bushmaster
KEY CUSTOMERS
• Defence knowledge and experience.• Extensive experience in vehicle manufacture of all types
including defence.• Demonstrated client focus delivers value for money with on
time delivery.
• Access to world wide support• Demonstrated record of delivering diversified engineering &
integration advisory services to a high level.
DISCRIMINATORS
• Technical Documentation• Project Management• Vehicle Engineering Design & Development• Process Design and Optimisation
• Manufacturing Engineering• Supplier Management & Improvement• Global Sourcing• Product Development
CAPABILITIES
Stephen MartinBusiness Development ManagerPAC Project Advisors Pty LtdUnit 20/3 Westside Avenue, Port Melbourne VIC 3207Tel: + 61 3 9645 6625Email: [email protected]
THE PAC GROUPwww.pacgroup.com
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation • •
Autonomous Systems • •
Avionics / Electrical Systems • •
Design & Engineering • •
Integration • •
Manufacturing / Fabrication / Assembly • •
Research & Development • •
• Textron Systems• Textron Inc.• L-3 Link Simulation and Training• University of Sydney
KEY PARTNERS
• AS9100 in progress• 2013 Governor of Victoria Export Award, Manufacturing
Award - Commendee• Member, Defence Industrial Security Program
QUALITY APPROVALS & AWARDS
• Textron Systems• Commonwealth of Australia• US Forces• Australian Army
KEY CUSTOMERS
• Designing, manufacturing, operating and supporting one of the world’s most reliable and trusted multi-mission unmanned aircraft.
• AerosondeTM systems have more than 140,000 operational hours in some of the world’s most harshest environments.
• Long range, Long Endurance, Beyond Visual Line of Sight unmanned aircraft
• UAS can carry several payloads/sensors in a single flight, returning a richer, more meaningful data yield in every hour flown.
• Our experience brings our military, civil and commercial customers a decisive advantage.
• Additional services include flight simulator maintenance and maintainer training for manned aviation including the C17 Globemaster cargo aircraft and the Australian Army Shadow 200 TUAS
DISCRIMINATORS
• Engineering Design of the proven AerosondeTM UAS platform ranging from mechanical, eletrical, propulsion, avionic and aerospace disciplines
• Manufacturing of the AerosondeTM UAS platform• Systems integration of customer payloads• Worldwide UAS Flight Operations
• UAS Pilot and Maintainer Trainer on the Textron Shadow 200 TUAS and other platforms
• Flight Simulator maintenance• Maintenance Crew training
CAPABILITIES
Jack KormasManaging DirectorTextron Systems Australia Pty LtdUnit 1, 585 Blackburn Road, Notting Hill VIC 3168Tel: + 61 3 9518 7300Email: [email protected]
TEXTRON SYSTEMS AUSTRALIAwww.textronsystems.com
62
• Defence Science and Technology Group• Australian Defence Primes• National and International Universities
KEY PARTNERS
• Defence Science and Technology group• Australian Defence Primes and SMEs• US Department of Defence• Victorian State Government
KEY CUSTOMERS• Solid foundation in world class research• Ability to form multi-disciplinary teams with the best in
Australia• Close partnerships with key Australian defence primes and
DST Group• Access to state of the art testing and research facilities
DISCRIMINATORS
• World leading multi-disciplinary research with collaborative links with major international bodies
• Experience in defence research and the generation of ground breaking research in key areas
• Ability to translate defence problems into research programs and executed through partnerships and
• Autonomous Systems, Human cognition and artificial intelligence, Human-machine interfaces
• Decision-making, control and optimization, Biomedical research
• Machine learning and deep learning systems, Radar, Intelligence Surveillance and Reconnaisance (ISR)
• Network security, network design, communication systems• Micro sensors, nano and quantum sensors and technology
CAPABILITIES
Professor Len SciaccaEnterprise Professor - Defence TechnologiesThe University of MelbourneParkville, VIC 3010Tel: + 61 3 8344 6954Email: [email protected]
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Analysis, Modelling & Simulation •
Autonomous Systems •
Information Systems •
Manufacturing / Fabrication / Assembly •
Materials Technology •
Research & Development •
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Avionics / Electrical Systems •
Design & Engineering • •
Integration •
Manufacturing / Fabrication / Assembly • •
Research & Development •
• RUAG, ESG• FLIR, ZEISS• Airborne Technologies, Phoenix Aerospace
KEY PARTNERS
• AS9100 Part C• ISO9001:2008• CASA CASR Part 21 Subpart K-APMA• FAA Part 145 Repair Station in USA
QUALITY APPROVALS & AWARDS
• Airbus Helicopters France, Germany & USA• Bell, Leonardo–Finmeccanica, MD, Sikorsky• US Coastguard, HM Coastguard
KEY CUSTOMERS
• Searchlight: Superior uniform beam, superb clarity, Internal multi-spectral filter for multi-mission capability
• Searchlight: Aerodynamic design for a low parasitic drag, light weight, lower power & highest MTBF in industry
• Searchlight: Ease of installation & integration with small electronics for slaving to other payloads
• Searchlight: NVG compliant, tested to DO-160,and DO-178 & Mil-STD-810 compliant
• Camera: gyro-stabilized gimbal at 200mm, 300mm, 400mm diameter and single LRU config
• Camera: multi-sensors HD TV, Spotter and Infrared camera with continuous zoom optics and MISB compliant video
• Camera: can be equipped with Laser Range Finder, Laser Illuminator, Laser Pointer, IMU / INS, Auto Object Tracking
• Camera: image blending, localized contrast enhancement, Geo-location, moving target indication, and moving map
DISCRIMINATORS
• Australian and Swedish based manufacturing• Australian manufacturing facility AS9100C certified• In house R&D and engineering teams on hardware and
software development and implementation• Ability to rapidly process and execute engineering changes
CAPABILITIES
Dan KiehlChief Operating OfficerTrakka Corp Pty. Ltd.23 Kilpa Rd, Moorabbin, VIC 3189Tel: + 61 3 9553 3000Email: [email protected]
TRAKKA SYSTEMStrakkasystems.com
THE UNIVERSITY OF MELBOURNEwww.unimelb.edu.au
63
AEROSPACE CAPABILITY AREAS
PRODUCTS
SERVICES
Manufacturing / Fabrication / Assembly • •
• Pelican Products
KEY PARTNERS
• Rolls Royce• Lockheed Martin• Airbus• Boeing
KEY CUSTOMERS
• Experience in designing more than 1500 NSN cataloged packaging solutions.
• Manufacturers of the largest plastic cases in the world.• Solutions are up to 30% cheaper than metal case alternatives.• Solutions are superior to timber packaging in product
protection and re usability.
• Capacity to mobilise and deliver in short lead times, to meet urgent operational requirements.
• Patented, innovative, cost saving solutions.• largest range of ‘off the shelf’ and bespoke solutions.• Global support, research and manufacture facilities.
DISCRIMINATORS
• Reusable plastic shipping and storage containers• Custom Advanced Case Solutions• Designed and manufactured to DEFAUST 1000c packaging
standards.• Custom rotomoulders• Design, develop, test and manufacture capability in Victoria.
CAPABILITIES
Justin EvansSales ManagerTrimcast Products Pty Ltd2 Forbes Close, Knoxfield, VIC 3180Tel: + 61 3 9765 1500Email: [email protected]
TRIMCAST PRODUCTS PTY LTDwww.pelicanaustralia.com
Victorian Defence Alliance - Aerospace Membership as at February 2017ÀB Phillips Pty Ltd
Advanced Composite Structures Australia Pty Ltd
Aerospace Australia Limited
Aerospace Materials
Agent Oriented Systems Pty Ltd
Albins Performance Transmissions
All Sat Communications
Altair Engineering Software Pty Ltd
Amaero Engineering
AME Systems
Amog Pty Ltd
Amphenol Australia Pty Ltd
Applied Automation and Engineering
Applied CCM
Applied Fasteners & Tooling
APV Engineering & Testing Services Pty Ltd
Aquila Engineering Pty Ltd
ATTAR
Austest Laboratories
Australian Precision Technologies
Australian Aerospace Engineering
Avalon Airport
Avionics 2000
A.W. Bell Pty Ltd
BAE Systems
Bartlett Industrial Textile Product Manufacturing
Beak Engineering Australia
BMT Design & Technology
Bralco Metals Australia Pty Ltd
Bredo Mators Pty Ltd
Brenco Aerospace
Cablex Pty Ltd
CGB Precision Products Pty Ltd
Chemring Australia
City of Greater Geelong
Cornell Design Victoria
DB Schenker
Deakin University
Defence Science Institute
Delta Gamma RF-Expert
DFP Recruitment
DMTC
DRSYS
EB Fusion
Enersys Australia
Envirofluid
ERGT Australia
Flexible Drive Pty Ltd
Flight Data Systems
Froude Hofmann Australia
Geoplex
GMS Composites
GPSat Systems Australia Pty Ltd
Groundmaster Engineering Pty Ltd
H&H Machine Tools
Hargo Engineering Pty Ltd
Henkel Australia Pty Ltd
Heuch Refridgeration
Hofmann Engineering
HTA Aerospace & Defense
Hydrix Pty Ltd
Ideal Logistics
Integra Systems
Interlloy
Invenio
KPMG
L3 Communications Australia
Latrobe City/Latrobe Regional Airport
Latrobe City Council
La Trobe University
Leonardo
LMATS Pty Ltd
Lockheed Martin
Logistic Engineering Services
Logistic Solutions Australasia
Lovitt Technologies Australia
Mansi On Raymond
Marand
Markerry Industries
Matrix Applied Computing Ltd
Memko Pty Ltd
Milspec Manufacturing
Moog Australia
Nezkot Precision Tooling & Engineering
Niksar Australia Pty Ltd
Nova Systems
Noventus
Ocean Software
Pennant Australasia Pty Ltd
PHM Technology Pty Ltd
Pilatus Australia Pty Ltd
Project Performance International
Pro Draft
Promand
PWB Anchor
Quartek
Quest Sale
QinetiQ
R&I Instrument & Gear Co. (Aust) Pty Ltd
Rectifier Technologies Pacific
Red Baron ALSE
Refuel International
RMIT
Ronson Gears
RUAG Australia
Sentient Vision Systems
Siemens Ltd
Simdikoff Group
Simuserv Pty Ltd
SOS Rehydrate
Southern Cross Protection
SRX Global
Swinburne University of Technology
Sypaq Systems
Systra Scott Lister
Textron Systems Australia
Trakka Corp Pty Ltd
Trimcast Products Pty Ltd
Union Hydraulics
UTC Aerospace Systems
Vative
Wellington Shire Council
VICTORIAN F-35 ROLL ON ROLL OFF ENGINE TRAILERMarand, a company based in Moorabbin, Victoria, is the global supplier of the F-35 Engine Removal and Installation Mobility Trailer.
CreditsImages thanks to:
Cablex, Department of Defence, DST Group, Marand, Nova Systems, RUAG, Textron
Document Authors & Contributors: Charlotte Morris, Ben Durrant
Sponsors: State Government of Victoria, Australian Industry & Defence Network - Vic
Vic
T: +61 (03) 9886 9278 | E: [email protected] | victoriandefencealliances.org.au
EDITION 1 - FEBRUARY 2017
Textron Systems Aerosonde Mk 4.7 UAV Produced at the Textron Systems Australia facility in Notting Hill, Victoria